`wp_load_translations_early()` is used when WordPress isn't fully initialized. Therefore using the `WP_Locale_Switcher` with `get_locale()`/`get_user_locale()` can cause PHP fatal errors.
This reverts [38976] and [38977], and instead removes `WP_Locale_Switcher` from `wp_load_translations_early()`.
See #29783.
Fixes#38535.
Built from https://develop.svn.wordpress.org/trunk@39005
git-svn-id: http://core.svn.wordpress.org/trunk@38947 1a063a9b-81f0-0310-95a4-ce76da25c4cd
With the introduction of user-specific languages in [38705] it's necessary to be able to switch translations on the fly. For example emails should be sent in the language of the recipient and not the one of the current user.
This introduces a new `WP_Locale_Switcher` class which is used for switching locales and translations. It holds the stack of locales whenever `switch_to_locale( $locale )` is called. With `restore_previous_locale()` you can restore the previous locale. `restore_current_locale()` empties the stack and sets the locale back to the initial value.
`switch_to_locale()` is added to most of core's email functions, either with the value of `get_locale()` (site language) or `get_user_locale()` (user language with fallback to site language).
Props yoavf, tfrommen, swissspidy, pbearne, ocean90.
See #29783.
Fixes#26511.
Built from https://develop.svn.wordpress.org/trunk@38961
git-svn-id: http://core.svn.wordpress.org/trunk@38904 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously we ensured that the entry points to WordPress were parsable by PHP4 in order to display a friendly not-supported-php error message.
However, for the last two years the main entry points have not actually parsed, and we've only added extra parse errors since it last worked in 3.9, so it's time we just remove this 'feature'.
The PHP version checks are still there for PHP 5.0/5.1, and so it's inplace when we eventually drop PHP 5.2 support.
See #29489.
Built from https://develop.svn.wordpress.org/trunk@38899
git-svn-id: http://core.svn.wordpress.org/trunk@38842 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`get_network()` falls back to the current network when called without any arguments. Between this and `get_current_network_id()`, we can replace almost all instances of the global `$current_site` and all instances of `get_current_site()`.
This effectively deprecates `get_current_site()`, something that we'll do in a future ticket.
Props flixos90.
Fixes#37414.
Built from https://develop.svn.wordpress.org/trunk@38814
git-svn-id: http://core.svn.wordpress.org/trunk@38757 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* `wp-admin` and `wp-includes` are scanned for classes to autoload
* Several 3rd-party and Ryan McCue-shaped libraries are excluded when the classmap is generated, see `composer.json`: `autoload.exclude-from-classmap`
* `wp-vendor/autoload_52.php` is included at the top of `wp-settings.php` - no changes need to be made to unit tests to include the autoloader
* An avalanche of `require()` and `require_once()` calls that loaded class files have been removed from the codebase.
The following files have been added to `svn:ignore` - they are not 5.2-compatible and fail during pre-commit:
* src/wp-vendor/autoload.php
* src/wp-vendor/composer/autoload_real.php
* src/wp-vendor/composer/autoload_static.php
* src/wp-vendor/composer/ClassLoader.php
We favor these files instead:
* src/wp-vendor/autoload_52.php
* src/wp-vendor/composer/autoload_real_52.php
* src/wp-vendor/composer/ClassLoader52.php
When new PHP classes are added to the codebase, simply run `composer install` or `composer update` from the project root to update the autoloader.
The future is now.
See #36335.
Built from https://develop.svn.wordpress.org/trunk@38399
git-svn-id: http://core.svn.wordpress.org/trunk@38340 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Don't lower memory limit if the current limit is greater than `WP_MAX_MEMORY_LIMIT`.
* Set `WP_MEMORY_LIMIT` and `WP_MAX_MEMORY_LIMIT` to current limit if the `memory_limit` setting can't be changed at runtime.
* Use `wp_convert_hr_to_bytes()` when parsing the value of the `memory_limit` setting because it can be a shorthand or an integer value.
* Introduce `wp_raise_memory_limit( $context )` to raise the PHP memory limit for memory intensive processes. This DRYs up some logic and includes the existing `admin_memory_limit` and `image_memory_limit` filters. The function can also be used for custom contexts, the `{$context}_memory_limit` filter allows to customize the limit.
* Introduce `wp_is_ini_value_changeable( $setting )` to determine whether a PHP ini value is changeable at runtime.
* Remove a `function_exists( 'memory_get_usage' )` check. Since PHP 5.2.1 support for memory limit is always enabled.
Related commits: [38011-38013]
Props jrf, A5hleyRich, swissspidy, ocean90.
Fixes#32075.
Built from https://develop.svn.wordpress.org/trunk@38015
git-svn-id: http://core.svn.wordpress.org/trunk@37956 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`wp_convert_hr_to_bytes()` was previously defined in wp-includes/media.php because it's only used by `wp_max_upload_size()` in the same file.
Moving this function to load.php allows us to improve core's memory limit handling.
See #32075.
Built from https://develop.svn.wordpress.org/trunk@38012
git-svn-id: http://core.svn.wordpress.org/trunk@37953 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In the past, `get_blog_details()` has been used to retrieve the `home`, `siteurl`, `blogname`, and `post_count` options for a site. By lazy loading properties in a `WP_Site` object, we can avoid having to use `get_blog_details()` and instead provide the properties as needed.
This introduces the global `site-details` cache group in which standard objects representing the site are stored. This will one day be a replacement for the `blog-details` cache group that is currently used in `get_blog_details()`.
This relies on the `ms_loaded` action introduced in [37916] as properties are not available via `get_option()` until multisite has been fully loaded.
Props flixos90.
Fixes#36935.
Built from https://develop.svn.wordpress.org/trunk@37918
git-svn-id: http://core.svn.wordpress.org/trunk@37859 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Moving to load.php introduces parity with other commonly evaluated `is_*()` functions such as `is_admin()` or `is_multisite()`. It also makes `is_ssl()` available much earlier in the loading process, such as for use in drop-ins like advanced-cache.php.
Props johnjamesjacoby.
Fixes#35844.
Built from https://develop.svn.wordpress.org/trunk@37677
git-svn-id: http://core.svn.wordpress.org/trunk@37643 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Similar to `get_current_blog_id`, this can be used to get the ID of the `$current_site` global. If not available, it will fallback to the main network ID. In single site, this will return 1.
Props spacedmonkey, flixos90.
Fixes#33900.
Built from https://develop.svn.wordpress.org/trunk@37670
git-svn-id: http://core.svn.wordpress.org/trunk@37636 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Non web interfaces with WordPress (such as wp-cli) need to be able to bypass certain checks in the bootstrap process. This introduces three new filters to allow for those checks to be skipped.
1. Provides a way of forcefully bypassing wp_maintenance().
2. Provides a way of forcefully bypassing wp_debug_mode(). See https://github.com/wp-cli/wp-cli/issues/177
3. Provide a way of forcefully skipping loading wp-content/advance-cache.php. See https://github.com/wp-cli/wp-cli/pull/164
These filters should not be used by plugins (in fact, they run before plugins are loaded, so they can't be used by plugins). In general, they should only be used in non-web interactions with WordPress.
See #34936.
Props jorbin, DrewAPicture.
Built from https://develop.svn.wordpress.org/trunk@37626
git-svn-id: http://core.svn.wordpress.org/trunk@37594 1a063a9b-81f0-0310-95a4-ce76da25c4cd
'comment' was made non-persistent in [7986], to address the difficulty of
reliable cache invalidation. Since then, the comment system has improved such
that we can be more confident that caches are being busted as needed.
Props spacedmonkey.
Fixes#36906.
Built from https://develop.svn.wordpress.org/trunk@37613
git-svn-id: http://core.svn.wordpress.org/trunk@37581 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Also use 'back-compat' in some inline comments where backward compatibility is the subject and shorthand feels more natural.
Note: 'backwards compatibility/compatibile' can also be considered correct, though it's primary seen in regular use in British English.
Props ocean90.
Fixes#36835.
Built from https://develop.svn.wordpress.org/trunk@37431
git-svn-id: http://core.svn.wordpress.org/trunk@37397 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Known functions, classes, and methods are now auto-linked in Code Reference pages following #meta1483.
Note: Hook references are still linked via inline `@see` tags due to the unlikelihood of reliably matching for known hooks based on a RegEx pattern.
See #32246.
Built from https://develop.svn.wordpress.org/trunk@37342
git-svn-id: http://core.svn.wordpress.org/trunk@37308 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Keeping myhacks support is a small price to pay for not breaking people's sites. Even if it is very very very few sites, breaking sites isn't something that should be encouraged. Even with 10 years of deprecation notices.
https://core.trac.wordpress.org/ticket/33741#comment:18 outlines all the ways that the hack_file and my-hacks options can be setup and thus all the ways that the removal of those options could break sites.
Fixes#33741.
Built from https://develop.svn.wordpress.org/trunk@35688
git-svn-id: http://core.svn.wordpress.org/trunk@35652 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `WP_INSTALLING` constant is a flag that WordPress sets in a number of
places, telling the system that options should be fetched directly from the
database instead of from the cache, that WP should not ping wordpress.org for
updates, that the normal "not installed" checks should be bypassed, and so on.
A constant is generally necessary for this purpose, because the flag is
typically set before the WP bootstrap, meaning that WP functions are not yet
available. However, it is possible - notably, during `wpmu_create_blog()` -
for the "installing" flag to be set after WP has already loaded. In these
cases, `WP_INSTALLING` would be set for the remainder of the process, since
there's no way to change a constant once it's defined. This, in turn, polluted
later function calls that ought to have been outside the scope of site
creation, particularly the non-caching of option data. The problem was
particularly evident in the case of the automated tests, where `WP_INSTALLING`
was set the first time a site was created, and remained set for the rest of the
suite.
The new `wp_installing()` function allows developers to fetch the current
installation status (when called without any arguments) or to set the
installation status (when called with a boolean `true` or `false`). Use of
the `WP_INSTALLING` constant is still supported; `wp_installing()` will default
to `true` if the constant is defined during the bootstrap.
Props boonebgorges, jeremyfelt.
See #31130.
Built from https://develop.svn.wordpress.org/trunk@34828
git-svn-id: http://core.svn.wordpress.org/trunk@34793 1a063a9b-81f0-0310-95a4-ce76da25c4cd
For the last 10 years, my-hacks has been deprecated and has been throwing a deprecation notice. For the last six years, you haven't been able to enable my-hacks.php in the admin UI. That should be enough time to give developers notice. Plugins and themes seem like they might have staying power.
Fixes#33741
Props bobbingwide
Built from https://develop.svn.wordpress.org/trunk@34291
git-svn-id: http://core.svn.wordpress.org/trunk@34255 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Dominik Schilling
Dion Hulse
Jeremy Felt
Sergey Biryukov
Scott Taylor
John Blackbourn
Aaron Jorbin
Drew Jaynes
Boone Gorges
Pascal Birchler
Rachel Baker
Gary Pendergast
Eric Lewis