Twelve years later, after no fewer than three themes have intentionally implemented popup comments in their functionality, before being abandoned for at least the last six years, we've reached a time where we can put this era behind us. A time when we can remove comment popup functionality from WordPress.
If this breaks the internet, I'll eat my hat.
Fixes#28617
Built from https://develop.svn.wordpress.org/trunk@35848
git-svn-id: http://core.svn.wordpress.org/trunk@35812 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[34561] instituted the policy of forcing pagination for comments. This strategy
was intended to avert problems when 'page_comments' is set to 0 - as it is by
default - and the number of comments on a given post rises into the hundreds or
thousands. By forcing pagination in all cases, we ensured that WordPress would
not time out by processing unwieldy numbers of comments on a given pageload.
The strategy proves problematic, however, because comment permalinks are
generated using the page of the comment. Forcing pagination for posts that
were not previously paginated would change the URL of all comments that do not
appear on the default comment page.
This changeset reintroduces the 'page_comments' setting and its corresponding
checkbox on Settings > Discussion. A number of tests, which were written after
[34561], are modified to work now that 'page_comments' will, once again, be
disabled by default.
See #8071.
Built from https://develop.svn.wordpress.org/trunk@35331
git-svn-id: http://core.svn.wordpress.org/trunk@35297 1a063a9b-81f0-0310-95a4-ce76da25c4cd
After [34561], `wp_list_comments()` no longer passed all of a post's comments
to `Walker_Comments`. As a result, calls to `get_comment_link()` occurring
inside the comment loop had insufficient context to determine the proper
'cpage' value to use when generating comment permalinks. This, in turn, caused
comment permalinks to behave erratically.
The current changeset addresses the problem as follows:
* `get_comment_link()` now accepts a 'cpage' parameter. When present, 'cpage' will be used to build the comment permalink - no automatic calculation will take place.
* When called within the main loop, `wp_list_comments()` calculates the proper 'cpage' value for comments in the loop, and passes it down to `get_comment_link()`.
* `cpage` and `comment-page-x` query vars are generally required in comment permalinks (see #34068), but an exception is made when 'default_comment_page=oldest': the bare post permalink will always be the same as `cpage=1`, so `cpage` is excluded in this case.
Props peterwilsoncc for assiduous spreadsheeting.
Fixes#34073.
Built from https://develop.svn.wordpress.org/trunk@34735
git-svn-id: http://core.svn.wordpress.org/trunk@34699 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[34561] "fixed" the problem of newest-first comments showing fewer than
'per_page' comments on the post permalink when the total number of comments
was not divisible by 'per_page'. See #29462. But this fix caused numerous
other problems. First, comment pages reported by `get_page_of_comment()`
(which expects comment pages to be filled oldest-first) were no longer correct.
Second, and more seriously, the new logic caused comments to be shifted
between pages, making their permalinks non-permanent.
The current changeset reverts the changed behavior. In order to preserve the
performance improvements introduced in [34561], an additional query must be
performed when 'default_comments_page=newest' and 'cpage=0' (ie, you're viewing
the post permalink). A nice side effect of this revert is that we no longer
need the hacks required to determine proper comment pagination, introduced in
[34561].
See #8071. See #34073.
Built from https://develop.svn.wordpress.org/trunk@34729
git-svn-id: http://core.svn.wordpress.org/trunk@34693 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Lazy-loading logic is moved to a method on `WP_Query`. This makes it possible
for comment feeds to take advantage of metadata lazyloading, in addition to
comments loaded via `comments_template()`.
This new technique parallels the termmeta lazyloading technique introduced in
[34704].
Fixes#34047.
Built from https://develop.svn.wordpress.org/trunk@34711
git-svn-id: http://core.svn.wordpress.org/trunk@34675 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The old comment pagination logic had a separate block for comment threads that
appeared on a single page. After the refactoring in [34561], all comment
pagination logic is unified.
This change ensures that 'comment_order' is respected in all scenarios.
Fixes#8071.
Built from https://develop.svn.wordpress.org/trunk@34669
git-svn-id: http://core.svn.wordpress.org/trunk@34633 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, the 'page_comments' toggle allowed users to disable comment
pagination. This toggle was only superficial, however. Even with
'page_comments' turned on, `comments_template()` loaded all of a post's
comments into memory, and passed them to `wp_list_comments()` and
`Walker_Comment`, the latter of which produced markup for only the
current page of comments. In other words, it was possible to enable
'page_comments', thereby showing only a subset of a post's comments on a given
page, but all comments continued to be loaded in the background. This technique
scaled poorly. Posts with hundreds or thousands of comments would load slowly,
or not at all, even when the 'comments_per_page' setting was set to a
reasonable number.
Recent changesets have addressed this problem through more efficient tree-
walking, better descendant caching, and more selective queries for top-level
post comments. The current changeset completes the project by addressing the
root issue: that loading a post causes all of its comments to be loaded too.
Here's the breakdown:
* Comment pagination is now forced. Setting 'page_comments' to false leads to evil things when you have many comments. If you want to avoid pagination, set 'comments_per_page' to something high.
* The 'page_comments' setting has been expunged from options-discussion.php, and from places in the codebase where it was referenced. For plugins relying on 'page_comments', we now force the value to `true` with a `pre_option` filter.
* `comments_template()` now queries for an appropriately small number of comments. Usually, this means the `comments_per_page` value.
* To preserve the current (odd) behavior for comment pagination links, some unholy hacks have been inserted into `comments_template()`. The ugliness is insulated in this function for backward compatibility and to minimize collateral damage. A side-effect is that, for certain settings of 'default_comments_page', up to 2x the value of `comments_per_page` might be fetched at a time.
* In support of these changes, a `$format` parameter has been added to `WP_Comment::get_children()`. This param allows you to request a flattened array of comment children, suitable for feeding into `Walker_Comment`.
* `WP_Query` loops are now informed about total available comment counts and comment pages by the `WP_Comment_Query` (`found_comments`, `max_num_pages`), instead of by `Walker_Comment`.
Aside from radical performance improvements in the case of a post with many
comments, this changeset fixes a bug that caused the first page of comments to
be partial (`found_comments` % `comments_per_page`), rather than the last, as
you'd expect.
Props boonebgorges, wonderboymusic.
Fixes#8071.
Built from https://develop.svn.wordpress.org/trunk@34561
git-svn-id: http://core.svn.wordpress.org/trunk@34525 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[34268] introduced cache priming for commentmeta, enabled by default. To
ensure performance on single post pages - where commentmeta is most likely
to cause performance issues - we disable up-front cache-priming. Instead, we
prime commentmeta caches for all comments in the loop the first time
`get_comment_meta()` is called on the page.
Props bradt, dd32, wonderboymusic, boonebgorges.
Fixes#16894.
Built from https://develop.svn.wordpress.org/trunk@34270
git-svn-id: http://core.svn.wordpress.org/trunk@34234 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Takes inspiration from `WP_Post` and adds sanity to comment caching.
* Clarifies when the current global value for `$comment` is returned. The current implementation in `get_comment()` introduces side effects and an occasion stale global value for `$comment` when comment caches are cleaned.
* Strongly-types `@param` docs
* This class is marked `final` for now
Props wonderboymusic, nacin.
See #32619.
Built from https://develop.svn.wordpress.org/trunk@33891
git-svn-id: http://core.svn.wordpress.org/trunk@33860 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The new 'submit_button' and 'submit_field' parameters for `comment_form()`
allow developers to modify the markup of the submit button and its wrapper.
These params are accompanied by targeted 'comment_form_submit_button' and
'comment_form_submit_field' filters on the concatenated markup.
Props coffee2code, morpheu5, DrewAPicture, boonebgorges.
Fixes#15015.
Built from https://develop.svn.wordpress.org/trunk@31699
git-svn-id: http://core.svn.wordpress.org/trunk@31680 1a063a9b-81f0-0310-95a4-ce76da25c4cd
To better understand screen reader text, check out https://make.wordpress.org/accessibility/2015/02/09/hiding-text-for-screen-readers-with-wordpress-core/
Screen Reader text improves the user experience for screen reader users. It provides additional context for links, document forms and other pieces of a page that may exist visually, but are lost when looking only at the html of a site. This does change the output of comments_popup_link if you don't pass in values for $zero, $one, $more or $none. Theme authors can and should style <code>.screen-reader-text</code> in ways that are recommended in the above article to hide it visually.
Props joedolson
Fixes#26553
Built from https://develop.svn.wordpress.org/trunk@31388
git-svn-id: http://core.svn.wordpress.org/trunk@31369 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Affects DocBlocks for the following core elements:
* Remove HTML tag from parameter description in `comment_form()`
* Remove HTML tag from a summary for the `comment_form_top` hook
* Markdown-indent a code snippet in the description for `get_linkobjectsbyname()`
* Markdown-indent a code snippet and format an unordered list in the description for `get_linkobjects()`
* Backtick-escape some inline code in the description for `clean_pre()`
* Remove HTML tag from the summary for the `rss_tag_pre` hook
* Various formatting fixes in the descriptions for `get_filesystem_method()` and `request_filesystem_credentials()`
Props rarst for the initial patch.
See #30473.
Built from https://develop.svn.wordpress.org/trunk@30538
git-svn-id: http://core.svn.wordpress.org/trunk@30527 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Parameters were added to the `get_comment_author`, `comment_author`, `get_comment_author_email`, `author_email`, `comment_email`, `get_comment_author_link`, `get_comment_author_IP`, `get_comment_author_url`, `comment_url`, `get_comment_excerpt`, `comment_excerpt`, `get_comment_ID`, and `get_comment_type` filters.
Fixes#22380.
Built from https://develop.svn.wordpress.org/trunk@30111
git-svn-id: http://core.svn.wordpress.org/trunk@30111 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`comments_template()` is used by most themes to display a post's comments. It
shows all comments that have been approved, and also shows all pending comments
by the current visitor (as determined by the comment cookies). However, the
comments API previously had no way of querying for "all comments that are
either approved, or are unapproved but written by foo@example.com". The
workaround was a direct SQL query: uncached, not subject to the same filters as
other comment queries, and just generally icky.
The new `include_unapproved` parameter for `WP_Comment_Query` accepts an array
of user IDs or email addresses. Pending comments associated with users in this
array will be included in query results, regardless of the value of the 'status'
parameter. In `comments_template()`, we leap from direct SQL queries to
`get_comments()` plus `include_unapproved', striving to put right what once
went wrong.
Props boonebgorges, simonwheatley, hardy101, jesin.
Fixes#19623.
Built from https://develop.svn.wordpress.org/trunk@29965
git-svn-id: http://core.svn.wordpress.org/trunk@29712 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Various improvements:
* Adds `@see` reference for `wp_list_comments()` in 'wp_list_comments_args' filter docs, added in [28285]
* Various phpDoc tweaks for the 'run_wptexturize' filter docs, added in [28715]
* Sentence and wrapping changes for `is_https_url()`, added in [28894]
* Documents the `$args` parameter for `wp_dropdown_languages()`, added in [29007]
* Adds a period to the parameter description for `_update_posts_count_on_delete()`, added in [28835]
* Documents a global in `is_customize_preview()`, added in [28999]
* phpDoc tweaks, adds an access modifier for `wpdb::esc_like()`, added in [28711]
See #28885.
Built from https://develop.svn.wordpress.org/trunk@29163
git-svn-id: http://core.svn.wordpress.org/trunk@28947 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* In `get_comment_reply_link()`, `$link` is set twice before it is used.
* In `Walker_Comment::start_lvl()`, `case 'ul':` is unreachable unless placed before `default:`.
* In `Walker_Comment::end_lvl()`, `case 'ul':` is unreachable unless placed before `default:`.
* In `comment_form()`, `$id` is conditionally set and never used.
See #27882.
Built from https://develop.svn.wordpress.org/trunk@28323
git-svn-id: http://core.svn.wordpress.org/trunk@28151 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Drew Jaynes
John Blackbourn
Sergey Biryukov
Boone Gorges
Scott Taylor
Mark Jaquith
Konstantin Obenland
Andrew Nacin
Helen Hou-Sandí
Dominik Schilling
Jeremy Felt
Aaron Jorbin
Peter Westwood