Loads the font family files from style variations defined within a theme for user in the site and post editors. This is to ensure the fonts are shown while editing without the need for a reload after switching styles.
Props ironprogrammer, mmaattiiaass.
Fixes#62231.
Built from https://develop.svn.wordpress.org/trunk@59260
git-svn-id: http://core.svn.wordpress.org/trunk@58652 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Fixes a fatal error in `array_keys()` (PHP 8.0+) as `$wp_filesystem->dirlist()` will return `false` when the source directory doesn't exist or becomes unreadable for some reason.
Props: verygoode, lifelightweb, da5f656f, costdev, afragen, azaozz
Fixes#61114
Built from https://develop.svn.wordpress.org/trunk@59257
git-svn-id: http://core.svn.wordpress.org/trunk@58649 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This caches the generated CSS from block nodes in merged Theme JSON data to avoid repeated costly operations required to compute style properties for blocks. The generated CSS is saved to a transient that expires every hour.
This is a follow-up that reimplements [58334], which was previously reverted in [58710].
Props thekt12, spacedmonkey, pereirinha, mukesh27, isabel_brison, oandregal, andrewserong, ramonjd, joemcgill, costdev, aaronrobertshaw, peterwilsoncc.
Fixes#61679. See #59595.
Built from https://develop.svn.wordpress.org/trunk@59256
git-svn-id: http://core.svn.wordpress.org/trunk@58648 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[59252] made the path filtering a bit too broad for the Test Old Branches workflow.
Though `v3` of the reusable PHPUnit workflow is used by some older branches, this version is updated much more frequently because it’s the latest version.
To limit the number of times this workflow runs, old branches should only be tested when old versions of the workflow are updated.
Follow up to [59252].
See #61564.
Built from https://develop.svn.wordpress.org/trunk@59254
git-svn-id: http://core.svn.wordpress.org/trunk@58646 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Some GitHub Action workflows use the `paths` filter to limit when workflows run for pull requests. This helps avoid running workflows unnecessarily when the pull request does not change any relevant code.
Currently, a few of these workflows are configured to run when any `.yml` file in the `.github/workflows/` directory is changed. This updates those workflows to target more specific workflow files for more efficient running.
See #61564.
Built from https://develop.svn.wordpress.org/trunk@59252
git-svn-id: http://core.svn.wordpress.org/trunk@58644 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This switches from using the `test`/`cp` commands when copying the `.env.example` file to using `node:fs`. `test` and `cp` are not available on Windows machines.
This also adds the `.env` file to the `svn:ignore` list to prevent it from being committed accidentally.
Follow up to [59038].
Props afercia, Clorith, poena.
Fixes#52668.
Built from https://develop.svn.wordpress.org/trunk@59249
git-svn-id: http://core.svn.wordpress.org/trunk@58641 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Fix an issue where Imagick did not properly set image quality for AVIF images. Adds a call to `setCompressionQuality` where we currently call `setImageCompressionQuality`
Props: jamesosborne, adamsilverstein, mukeshpanchal27.
Fixes: #61614.
Built from https://develop.svn.wordpress.org/trunk@59247
git-svn-id: http://core.svn.wordpress.org/trunk@58639 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Load block patterns for bundled themes on the `init` hook to avoid triggering notices caused by loading the translations too early.
The change is applied to Twenty Ten, Twenty Twelve, Twenty Thirteen, Twenty Fourteen, Twenty Fifteen, Twenty Sixteen and Twenty Twenty.
Props domainsupport, swissspidy.
Fixes#62237.
See #44937.
Built from https://develop.svn.wordpress.org/trunk@59244
git-svn-id: http://core.svn.wordpress.org/trunk@58636 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Includes:
* Moving `@covers` tags to the class-level DocBlock, since this is the only function tested in the class.
* Adjusting the assertion messages for clarity, as `rss_enclosure()` does not return anything directly.
* Using a static closure for improved performance.
Follow-up to [59241].
See #61530.
Built from https://develop.svn.wordpress.org/trunk@59243
git-svn-id: http://core.svn.wordpress.org/trunk@58635 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Relocate the defintion of `absint()` to `load.php` to allow it to be available to `get_current_blog_id()` and `get_current_network_id()`. These functions may be called by caching drop-ins, prior to the loading of `functions.php`.
Props flixos90, geekofshire, johnjamesjacoby, sergeybiryukov, wonderboymusic.
Fixes#40682.
Built from https://develop.svn.wordpress.org/trunk@59242
git-svn-id: http://core.svn.wordpress.org/trunk@58634 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Prevent possible PHP warnings caused by malformed enclosure meta data. This change ensures the enclosure meta data has at least three lines of text before generating the tag in `rss_enclosure()`.
Props arypneta, johnjamesjacoby, nihar007, rahmohn, rghedin, zahardoc.
Fixes#58798.
Built from https://develop.svn.wordpress.org/trunk@59241
git-svn-id: http://core.svn.wordpress.org/trunk@58633 1a063a9b-81f0-0310-95a4-ce76da25c4cd
There is a bug where the attributes panel is not shown in custom post types. This is caused because each post type can define a capability_type, which by default is post, so the logic to map the capabilities wasn't correct and it was returning false.
Props santosguillamot, cbravobernal.
Fixes#62226.
Built from https://develop.svn.wordpress.org/trunk@59239
git-svn-id: http://core.svn.wordpress.org/trunk@58631 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Bootstrap block bindings sources earlier in the process through an inline script to ensure they are available when developers want to extend them in the client. Following the same pattern other APIs like registering block types are doing.
Props santosguillamot, cbravobernal, gziolo.
Fixes#6225.
Built from https://develop.svn.wordpress.org/trunk@59238
git-svn-id: http://core.svn.wordpress.org/trunk@58630 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Updates `update_post_thumbnail_cache()` to account for `WP_Query` objects that only contain the post ID field rather than the entire post object.
This changes passes the `$post` value to `get_post_thumbnail_id()` rather than assuming the presence of the ID property. Additionally, the posts to which the thumbnail is attached are now primed prior to calling the function to avoid numerous unnecessary database queries.
The test `WP_Test_REST_Posts_Controller::test_get_items_primes_parent_post_caches()` is modified to account for an order of operations change for the priming of post meta caches. The cache is no longer primed in the final call to `update_meta_cache()` so the tests need to account for the post meta to be primed in any call to the function.
Props antpb, jorbin, khokansardar, linsoftware, mukesh27, oglekler, rajinsharwar, sumitsingh, xendo.
Fixes#59521.
Built from https://develop.svn.wordpress.org/trunk@59235
git-svn-id: http://core.svn.wordpress.org/trunk@58627 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Introducing the new content for the 6.7 About page. As with the last release, this About page has a simple layout, and links off to WordPress.org for a full overview.
Props ndiego, annezazu, provenself, ryelle, joen, parinpanjari.
See #61961.
Built from https://develop.svn.wordpress.org/trunk@59234
git-svn-id: http://core.svn.wordpress.org/trunk@58626 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This merges the latest improvements to the Twenty Twenty-Five theme from GitHub into `trunk` for 6.7 beta 3.
A full list of changes can be found on GitHub: [0d8b245021...5d17f41da8 WordPress/twentytwentyfive@0d8b245...5d17f41]
Props annezazu, areziaal, beafialho, cwhitmore, franz00, get_dave, joedolson, joen, juanfra, karmatosed, kartikmehta, mukesh27, onemaggie, pgeorgiev, poena, richtabor, sudipatel007, sumitbagthariya16, wildworks, youknowriad.
Fixes#62218.
Built from https://develop.svn.wordpress.org/trunk@59233
git-svn-id: http://core.svn.wordpress.org/trunk@58625 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This removes a redundant check for a falsey value, which is equivalent to the `empty()` check directly before.
Includes minor adjustments in the unit test:
* Adding a `@covers` tag.
* Correcting the description for clarity.
* Using `assertSame()` for strict type checking.
Follow-up to [59216].
See #60299.
Built from https://develop.svn.wordpress.org/trunk@59232
git-svn-id: http://core.svn.wordpress.org/trunk@58624 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Currently, `composer update` is run whenever `test:php` is called to ensure the latest versions of `yoast/phpunit-polyfills` and other dependencies are always installed when running the PHPUnit test suite.
For contributors using the local Docker environment to run tests during development, this is unnecessary and can often result in a 30+ second delay every time `test:php` is called.
This moves the command to `env:install`, reducing the number of times `composer update` is run from many to once. Since the environment needs to be started in order to run tests, `env:install` will still confirm that the latest versions of required dependencies are installed and available prior to running the test suite.
Props azaozz, swissspidy, johnbillion, peterwilsoncc, hellofromtonya.
Fixes#57189.
Built from https://develop.svn.wordpress.org/trunk@59231
git-svn-id: http://core.svn.wordpress.org/trunk@58623 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Introduces a test to ensure that new bundled themes are included in the `$_new_bundled_files` array. Modifies previous theme related tests added during the 6.7 release cycle to include the correct annotations.
Props peterwilsoncc, mukesh27, costdev.
See #61530, #62103.
Built from https://develop.svn.wordpress.org/trunk@59227
git-svn-id: http://core.svn.wordpress.org/trunk@58619 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Fix a combination of floated and absolutely positioned content that caused previous and next links to be stacked under other content, making them unclickable on mobile devices. Adjust the position of the post date so that focus order matches visible order. Prevent overlap of 'Edit' button on post title.
Props kel-dc, parthvataliya, dhruvang21, sabernhardt, wpeople, itpathsolutions, balub, dilip2615, tirth03.
Fixes#62008.
Built from https://develop.svn.wordpress.org/trunk@59226
git-svn-id: http://core.svn.wordpress.org/trunk@58618 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add `aria-labelledby` and `aria-describedby` attributes to revision slider selection handle. Add keyboard `:focus` state to revision slider handle. Move 'multiple revision' checkbox before the buttons panel, matching its visual order. Change diff `Title` and `Content` headings from `h3` to `h2` to correct headings hierarchy.
Props joedolson, rishishah, sarahricker, williamalexander, afercia.
Fixes#52303.
Built from https://develop.svn.wordpress.org/trunk@59225
git-svn-id: http://core.svn.wordpress.org/trunk@58617 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Change accordions in the customizer and the navigation menus to make proper usage of accordion markup patterns. This includes adding missing `:focus` states, using a `button` element to control tabbing and interaction, instead of the heading elements, and removing instructional text for screen reader users that was used to compensate for the incorrect markup pattern.
Props afercia, rishishah, kushang78, rcreators, krupajnanda, hmbashar, joedolson.
Fixes#42002.
Built from https://develop.svn.wordpress.org/trunk@59224
git-svn-id: http://core.svn.wordpress.org/trunk@58616 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In Twenty Nineteen r58580 increased size of avatars. This caused issues with the position of author checkbox. This resolves by moving without impacting the avatar blocks.
Props sabernhardt, nithins53, sudipatel007.
Fixes#62096.
Built from https://develop.svn.wordpress.org/trunk@59222
git-svn-id: http://core.svn.wordpress.org/trunk@58614 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The E2E test suite has some basic tests to confirm that the plugin can be activated without conflicts. This works great until the minimum version of WordPress required to run the plugin is raised. Old branches that attempt to run these tests that are newly incompatible with the latest version of the plugin will fail.
This change adds a `gutenberg-version` input to the E2E GitHub Action workflow to allow these tests to continue running with the last compatible version.
Props swissspidy.
See #61530.
Built from https://develop.svn.wordpress.org/trunk@59220
git-svn-id: http://core.svn.wordpress.org/trunk@58613 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This fixes an issue after [59170] that was causing the Performance Test workflows to fail on older branches since the `CODEVITALS_PROJECT_TOKEN` input value was marked as required but was not being passed.
This is a follow-up to [59214] and [59215].
Fixes#62153.
Props desrosj, joemcgill, flixos90, swissspidy.
Built from https://develop.svn.wordpress.org/trunk@59217
git-svn-id: http://core.svn.wordpress.org/trunk@58610 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When checking for updates to use_ssl, use strings for the comparison values, matching the stored values. Fixes an issue where calls to wp_update_user updated the database meta value for use_ssl even when the value was missing or unchanged.
Props prettyboymp, rajinsharwar, adamsilverstein, johnbillion, rayhatron, mukesh27, joemcgill.
Fixes#60299.
Built from https://develop.svn.wordpress.org/trunk@59216
git-svn-id: http://core.svn.wordpress.org/trunk@58609 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This fixes an issue after [59170] that was causing the Performance release workflows to fail on older branches since the `CODEVITALS_PROJECT_TOKEN` input value was marked as required but was not being passed.
Fixes#62153.
Props desrosj, joemcgill, flixos90.
Built from https://develop.svn.wordpress.org/trunk@59214
git-svn-id: http://core.svn.wordpress.org/trunk@58607 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The cost of using `WP_Theme_JSON::get_block_nodes()` for this in its original shape was high enough to lead to a performance regression. Therefore this changeset introduces a new option on the method that allows to bypass all logic except for retrieving the node paths, which is much faster and everything that this functionality needs.
Follow up to [58936].
Props mukesh27, flixos90, ramonopoly, joemcgill, andrewserong, swissspidy.
Fixes#61858.
Built from https://develop.svn.wordpress.org/trunk@59213
git-svn-id: http://core.svn.wordpress.org/trunk@58606 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When many workflows are initiated at the same time, there are often instances where the requests to Slack providing updates are rate limited. This usually happens when the Test Old Branches workflow runs and initiates testing for all workflows in branches that could potentially receive a security update.
Even though everything was successful in the workflow except the message, the workflow run is marked as failed. The next time the same workflow runs for that branch, a “fixed” message will be sent to `#core` in Slack. The result is a burst of messages that is quite noisy and unnecessary.
This temporarily adds `continue-on-error` to the jobs responsible for sending the messages until a better solution can be decided on.
See #61701.
Built from https://develop.svn.wordpress.org/trunk@59209
git-svn-id: http://core.svn.wordpress.org/trunk@58604 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`npm dedupe` is a command that attempts to simplify the structure of the local package tree by moving dependencies higher up. This allows for more effective package sharing, less transfer, and smaller `node_modules` folders.
This change configures npm to `prefer-dedupe` by default so that these benefits persist and the command is not required to be run regularly.
This also brings better alignment with the Gutenberg repository, which has already configured `prefer-dedupe`.
Props jonsurrell.
Fixes#62190.
Built from https://develop.svn.wordpress.org/trunk@59207
git-svn-id: http://core.svn.wordpress.org/trunk@58602 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This updates the `package-lock.json` file to use the version 3 format.
Version 3 removes the version 1 format data, resulting in a smaller file. While version 3 format is not supported in npm < 7, a lower limit is enforced in the `engines` declaration within `package.json` and has been >= 7 since [56378].
The Gutenberg repository has already been updated to use version 3.
Props jonsurrell.
See #62190.
Built from https://develop.svn.wordpress.org/trunk@59206
git-svn-id: http://core.svn.wordpress.org/trunk@58601 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Fixes an error in which the file size meta data retained the original upload's values follow a user editing the images in the media screen.
The original images' file sizes are now stored in the backup image data to allow for them to be restored when a user restores the original image.
Props ankit-k-gupta, antpb, audrasjb, chaion07, gauravsingh7, joedolson, oglekler, pls78, rajinsharwar, sayedulsayem, vertisoft.
Fixes#59684.
Built from https://develop.svn.wordpress.org/trunk@59202
git-svn-id: http://core.svn.wordpress.org/trunk@58597 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Removes the `wp_` prefix from block template registration functions for consistency with other block related registration functions.
* `wp_register_block_template()` becomes `register_block_template()`.
* `wp_unregister_block_template()` becomes `unregister_block_template()`.
Props aljullu, aristath, youknowriad, swissspidy.
Fixes#62193.
Built from https://develop.svn.wordpress.org/trunk@59201
git-svn-id: http://core.svn.wordpress.org/trunk@58596 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds missing handling for the `typography.writingMode` property to the style engine, so that dynamic blocks correctly render text orientation styles on the site frontend.
Props wildworks, aaronrobertshaw, poena, get_dave, ndiego.
Fixes#62189.
See #59306.
Built from https://develop.svn.wordpress.org/trunk@59199
git-svn-id: http://core.svn.wordpress.org/trunk@58594 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `current_user_can_for_site()` function is a replacement for `current_user_can_for_blog()` which is now deprecated. `user_can_for_site()` is a renaming of the `user_can_for_blog()` function which was introduced in [59123]. The intention of this change is to prevent the introduction of a new function which uses the old "blog" naming structure.
Props swissspidy, spacedmonkey, flixos90, johnjamesjacoby
Fixes#45197
Built from https://develop.svn.wordpress.org/trunk@59198
git-svn-id: http://core.svn.wordpress.org/trunk@58593 1a063a9b-81f0-0310-95a4-ce76da25c4cd
If a user uploads an 800x800 image and a 512x512 image is required, then they should be allowed to skip cropping. This still creates the correct crop behind the scenes but simplifies the flow a bit for users.
Props nirajgirixd, celloexpressions, westonruter, azaozz, jorbin.
Fixes#36441.
Built from https://develop.svn.wordpress.org/trunk@59197
git-svn-id: http://core.svn.wordpress.org/trunk@58592 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Cache the unmodified `$wp_version` value as a static. This retains the current behaviour during the upgrade process `$wp_version` referencing the version of WordPress being upgraded from.
Follow up to [58848].
Props Cybr, debarghyabanerjee, mukesh27, costdev, SergeyBiryukov, TobiasBg, desrosj, azaozz.
Fixes#61782.
Built from https://develop.svn.wordpress.org/trunk@59192
git-svn-id: http://core.svn.wordpress.org/trunk@58587 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This saves the `WP_Image_Editor` implementation that supports the queried options to a cache to avoid performing redundant compatibility checks, which can be expensive. For example, `WP_Image_Editor_Imagick::supports_mime_type()` can get called in the editor multiple times to determine which image formats can be supported during `wp_plupload_default_settings()`.
With this cache, the support will be stored for 1 day, speeding up loading times for the editor. This also introduces a new global caching group, `image_editor` to manage any subsequent caches that are related to image editor optimizations.
Props joemcgill, desrosj, westonruter, flixos90, adamsilverstein, mukesh27, joehoyle.
Fixes#61532.
Built from https://develop.svn.wordpress.org/trunk@59189
git-svn-id: http://core.svn.wordpress.org/trunk@58584 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Remove code that forced focus to skip from the title field to the editor. Add link to skip to editor to give the user control over their path. Set `aria-pressed` on editor selector buttons to communicate which editor is enabled. Make focus state visible on unselected editor button. Remove `wp_keep_scroll_position` flag used for IE compatibility. Add `role="presentation"` to table used as status info bar.
This addresses a long-standing accessibility problem in the classic editor which created a confusing keyboard navigation path by skipping all content between the title field and the content editor.
Props afercia, rcreators, benjamin_zekavica, sharonaustin, joedolson.
Fixes#29838.
Built from https://develop.svn.wordpress.org/trunk@59188
git-svn-id: http://core.svn.wordpress.org/trunk@58583 1a063a9b-81f0-0310-95a4-ce76da25c4cd
On the media grid view, hide the copied tooltip when a subsequent URL is copied to the clipboard. This prevents tooltips from remaining displayed if a user copies multiple URLs within a three second period.
Props antpb, debarghyabanerjee, jayadevankbh, sabernhardt.
Fixes#60082.
Built from https://develop.svn.wordpress.org/trunk@59187
git-svn-id: http://core.svn.wordpress.org/trunk@58582 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Introduce two new tests relating to bundled themes:
1. Ensure the list of tested themes matches the list of themes defined in `WP_Theme`
2. Ensure the run time value of `WP_DEFAULT_THEME` is included in the list of themes defined in `WP_Theme`
See #61530.
Built from https://develop.svn.wordpress.org/trunk@59186
git-svn-id: http://core.svn.wordpress.org/trunk@58581 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add an option `show_reply_to_text` as an option to use the current `aria-label` attribute on comment reply links as the visible link. If used, remove the `aria-label`. Also add documentation of the `reply_to_text` parameter to the function documentation.
Props halilesen, sabernhardt, snehapatil02, jainil07, joedolson.
Fixes#59965.
Built from https://develop.svn.wordpress.org/trunk@59181
git-svn-id: http://core.svn.wordpress.org/trunk@58576 1a063a9b-81f0-0310-95a4-ce76da25c4cd
All functions that are used there must be present in both the previous version being upgraded from, and the later version that's being installed (e.g. when rolling back Core) as these files are used in both.
Props djennez, SergeyBiryukov, jorbin, peterwilsoncc, azaozz.
Fixes#62165.
See 61627.
Built from https://develop.svn.wordpress.org/trunk@59180
git-svn-id: http://core.svn.wordpress.org/trunk@58575 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Omit `title` attributes if they are defined but are the same text as the menu item title, either before or after filtering. If a navigation menu filter makes significant changes to the menu title without changing the title attribute, this will still remove them. The cases where this occurs and the title attribute is still a useful value will be very uncommon, however.
Props hareesh-pillai, audrasjb, sabernhardt, afercia, sergeybiryukov, tirth03, joedolson.
Fixes#51299.
Built from https://develop.svn.wordpress.org/trunk@59179
git-svn-id: http://core.svn.wordpress.org/trunk@58574 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Omit `title` attributes if they are defined but are the same text as the menu item title, either before or after filtering. If a navigation menu filter makes significant changes to the menu title without changing the title attribute, this will still remove them. The cases where this occurs and the title attribute is still a useful value will be very uncommon, however.
Props hareesh-pillai, audrasjb, sabernhardt, afercia, sergeybiryukov, tirth03, joedolson.
Fixes#51299.
Built from https://develop.svn.wordpress.org/trunk@59177
git-svn-id: http://core.svn.wordpress.org/trunk@58572 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is the last part in a larger modularization of the data in `WP_Debug_Data`. Previously this was a single massive method drawing in debug data from various groups of related data, where the groups were independent from each other.
This patch separates the findal set of twelve groups, the `wp-active-theme`, `wp-parent-theme`, and `wp-themes-inactive` info, into a separate methods focused on those data.
This work precedes changes to make the `WP_Debug_Data` class more extensible for better use by plugin and theme code.
Developed in https://github.com/wordpress/wordpress-develop/pull/7507
Discussed in https://core.trac.wordpress.org/ticket/61648
Props apermo, dmsnell.
Fixes#61648.
Built from https://develop.svn.wordpress.org/trunk@59176
git-svn-id: http://core.svn.wordpress.org/trunk@58571 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is the tenth part in a larger modularization of the data in `WP_Debug_Data`. Previously this was a single massive method drawing in debug data from various groups of related data, where the groups were independent from each other.
This patch separates the eleventh of twelve groups, the `wp-paths-sizes` info, into a separate method focused on that data.
This work precedes changes to make the `WP_Debug_Data` class more extensible for better use by plugin and theme code.
Developed in https://github.com/wordpress/wordpress-develop/pull/7445
Discussed in https://core.trac.wordpress.org/ticket/61648
Props apermo, dmsnell.
See #61648.
Built from https://develop.svn.wordpress.org/trunk@59175
git-svn-id: http://core.svn.wordpress.org/trunk@58570 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is the ninth part in a larger modularization of the data in `WP_Debug_Data`. Previously this was a single massive method drawing in debug data from various groups of related data, where the groups were independent from each other.
This patch separates the tenth of twelve groups, the `wp-core` info, into a separate method focused on that data.
This work precedes changes to make the `WP_Debug_Data` class more extensible for better use by plugin and theme code.
Developed in https://github.com/wordpress/wordpress-develop/pull/7357
Discussed in https://core.trac.wordpress.org/ticket/61648
Props apermo, dmsnell.
See #61648.
Built from https://develop.svn.wordpress.org/trunk@59174
git-svn-id: http://core.svn.wordpress.org/trunk@58569 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is the eighth part in a larger modularization of the data in `WP_Debug_Data`. Previously this was a single massive method drawing in debug data from various groups of related data, where the groups were independent from each other.
This patch separates the eighth and ninth of twelve groups, the `wp-plugins-active` and `wp-plugins-inactive` info, into separate methods focused on that data.
Unlike the other patches in this series, the plugins data comes from a single source and is separated out into separate debug sections, so the active and inactive methods call a new shared method which provides raw data for both. Optimizations and refactors may occur in follow-up tickets.
This work precedes changes to make the `WP_Debug_Data` class more extensible for better use by plugin and theme code.
Developed in https://github.com/wordpress/wordpress-develop/pull/7458
Discussed in https://core.trac.wordpress.org/ticket/61648
Props apermo, dmsnell.
See #61648.
Built from https://develop.svn.wordpress.org/trunk@59172
git-svn-id: http://core.svn.wordpress.org/trunk@58567 1a063a9b-81f0-0310-95a4-ce76da25c4cd
For error detection and rollback functions WordPress also starts a loopback request to the homepage. This loopback request is made with special parameters that when they don't match, generates an erorr. This hardens that flow by exiting out of the check if the nonce or key is missing or the nonce is not saved in the DB. It further hardens it by not caching the failures and asking search engines not to index the url with the failures.
Props georgwordpress, swissspidy, jorbin.
Fixes#62105.
Built from https://develop.svn.wordpress.org/trunk@59171
git-svn-id: http://core.svn.wordpress.org/trunk@58566 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This originally broke in [58165] and unfortunately went unnoticed for a while because the failing request to send the data did not cause the GitHub workflows to fail. This changeset resolves the underlying access problem, which was happening because reusable GitHub workflows do not automatically receive secrets from the calling workflow. More concretely, the relevant `CODEVITALS_PROJECT_TOKEN` was not being explicitly passed to the reusable workflow.
The changeset also includes a change so that in the future a failing request would cause the workflow to fail, which ensures a similar problem further down the road wouldn't go unnoticed.
Props joemcgill, flixos90, swissspidy, mukesh27, sergeybiryukov
Fixes#62153.
See #61213.
Built from https://develop.svn.wordpress.org/trunk@59170
git-svn-id: http://core.svn.wordpress.org/trunk@58565 1a063a9b-81f0-0310-95a4-ce76da25c4cd
There’s now a number of automated comments left on pull requests to help contributors that a PR can easily be overridden with activity.
Some of the comments are only relevant until a specific action is taken. One such comment is for informing the PR author that a link to a Trac ticket is a requirement for considering any suggested changes.
This updates the pull request comment workflow to remove the comment once a link to a Trac ticket is properly included.
Props debarghyabanerjee.
Fixes#61567.
Built from https://develop.svn.wordpress.org/trunk@59169
git-svn-id: http://core.svn.wordpress.org/trunk@58564 1a063a9b-81f0-0310-95a4-ce76da25c4cd
With PHP 8.4 due out in November later this year, contributors have been working on ensuring WordPress 6.7 is as compatible as possible. Enough progress has been made during this release cycle where PHPUnit tests now run successfully with no failures reported.
This change enables PHP 8.4 testing throughout Core’s GitHub Action workflows to ensure no new problems are introduced going forward.
There are two exceptions to this:
- The Importer plugin has some compatibility issues that produce test failures. There is an open pull request upstream, but these problematic tests have been marked skipped when running on PHP 8.4 until that PR is merged.
- Since no stable versions of xDebug with PHP 8.4 support have been published, these tests are also skipped for now.
Props jrf, desrosj.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59168
git-svn-id: http://core.svn.wordpress.org/trunk@58563 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In most cases, running the installation testing workflow in forked repositories is unnecessary and wasteful. This adds conditions to that workflow to prevent the tests from running on forks unless a pull request is being made back to that fork.
This pattern is already used across other workflows.
Props jrf.
See #61564.
Built from https://develop.svn.wordpress.org/trunk@59167
git-svn-id: http://core.svn.wordpress.org/trunk@58562 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Includes:
* Correcting the test class name as per the naming conventions.
* Documenting data provider values using hash notation.
* Passing the `$attrs` parameter to the function if not `null`.
Follow-up to [26328], [55563], [59162].
See #61530.
Built from https://develop.svn.wordpress.org/trunk@59163
git-svn-id: http://core.svn.wordpress.org/trunk@58558 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [56515], the default value of `Add New` was changed to "Add New Post / Add New Page". This caused problems with post types where `add_new` was not declared.
Change core usage to reference the `add_new_item` value and revert the default value of `add_new` back to "Add New / Add New". This retains the accessibility advantages without creating counter intuitive usage of the `add_new` key.
With this change, post types registered with no `add_new` key will be unimpacted in core, and post types registered with no `add_new_item` key will use the default "Add New Post", which is not a change from the current state.
Props smerriman, afercia, rcreators, joedolson, eclev91, johnbillion.
Fixes#60045.
Built from https://develop.svn.wordpress.org/trunk@59161
git-svn-id: http://core.svn.wordpress.org/trunk@58556 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Fix several settings groups in the discussion options that were written in a compound/sentence structure format. These formats are difficult to parse for screen reader users and have significant layout problems in mobile viewports.
Change settings to use independent labeling.
Props Cheffheid, anthakkar08, DrewAPicture, afercia, jwgoedert, sannevndrmeulen, sudipatel007, tirth03, joedolson.
See #31354.
Built from https://develop.svn.wordpress.org/trunk@59160
git-svn-id: http://core.svn.wordpress.org/trunk@58555 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Expands the use of `wp_get_wp_version()` to get an unmodified value of the current WordPress version in various locations in which it would be unhelpful if a plugin has modified the global `$wp_version`.
This includes:
* Theme and plugin compatibility tests
* During the upgrade process of WP Core
* Debug and site health data reports of the current version
* Version number display in the dashboard
* Block theme export and caching utilities
* The `WPDB` class
Props peterwilsoncc, hellofromtonya.
See #61627.
Built from https://develop.svn.wordpress.org/trunk@59159
git-svn-id: http://core.svn.wordpress.org/trunk@58554 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Inline comments must end in full stops, exclamation marks, or question marks.
* There must be exactly one blank line after the file comment.
Follow-up to [24832], [25023], [25088], [25090], [25213], [51045].
Props pitamdey, dhruvang21, aristath.
Fixes#62098.
Built from https://develop.svn.wordpress.org/trunk@59158
git-svn-id: http://core.svn.wordpress.org/trunk@58553 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [59127], `_doing_it_wrong` warnings were added if plugins or themes load translations too early, either through a manual function call or just-in-time loading.
Because many plugins and themes still manually call `load_plugin_textdomain()`, `load_theme_textdomain()` or `load_muplugin_textdomain()`, even though they don't have to anymore, that caused a lot of warnings.
With this new approach, these functions merely register the translations path in the existing `WP_Textdomain_Registry` and do not immediately try to load the translations anymore. The loading is all handled by the just-in-time functionality.
This way, warnings will only be emitted if triggering the just-in-time loading too early, greatly improving the developer experience and to a degree also performance.
Props swissspidy, sergeybiryukov, mukesh27.
See #44937.
Built from https://develop.svn.wordpress.org/trunk@59157
git-svn-id: http://core.svn.wordpress.org/trunk@58552 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Includes:
* Simplifying the logic and bringing some consistency to how the values are checked and displayed.
* Correcting the debug value for `DB_COLLATE`. This should be the actual contents of the constant, and empty if it is indeed empty, as the debug data that's copied and shared should represent the raw value, and does not need to be in a user-readable format.
Follow-up to [45782], [52021], [54239], [59147].
Props Clorith, SergeyBiryukov.
See #58265.
Built from https://develop.svn.wordpress.org/trunk@59155
git-svn-id: http://core.svn.wordpress.org/trunk@58550 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[59083] introduced an issue where Script Modules registered src does not correctly respect the includes path.
Before that change, script modules were registered using includes_url. The patch used a hard-coded path which breaks when sites are not served from the root, e.g. the site root is https://example.com/wp instead of https://example.com/.
Follow-up to [59083].
Props nendeb55, jonsurrell, cbravobernal.
Fixes#62146.
Built from https://develop.svn.wordpress.org/trunk@59154
git-svn-id: http://core.svn.wordpress.org/trunk@58549 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add additional references to the new default theme required in various locations of the code base, build steps and unit tests.
Follow up to [59146].
Props afragen, dd32, desrosj, davidbaumwald, jorbin, courane01, kirasong.
See #62103.
Built from https://develop.svn.wordpress.org/trunk@59150
git-svn-id: http://core.svn.wordpress.org/trunk@58546 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Right now, for example if DB_COLLATE is defined as '', the value will not be shown in the WordPress Constants list, there's just an empty space. This adds a message so it's clearer when the constant is empty.
Props Presskopp, brobken, Clorith.
Fixes#58265.
Built from https://develop.svn.wordpress.org/trunk@59147
git-svn-id: http://core.svn.wordpress.org/trunk@58543 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This adds tracking of the JPEG XL image type support alongside WebP, HEIC, and AVIF image types when requesting an upgrade from WordPress.org.
This will check for JPEG XL support in both ImageMagick and GD, even though GD technically does not yet have support for JPEG XL.
Props deepakrohilla, swissspidy, dd32, ayeshrajans, samiamnot, joemcgill.
Fixes#62050.
Built from https://develop.svn.wordpress.org/trunk@59140
git-svn-id: http://core.svn.wordpress.org/trunk@58536 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Check whether the media frame menu has action items. If not, hide the sidebar. Prevents showing a sidebar that looks interactive but contains no controls that are interactive. When in Create Gallery mode, the only action available is 'Create Gallery', and it is always active.
Props ukdrahul, ababir, ruchirj, nhrrob, joedolson, shailu25, mukesh27, sudipatel007, dhrumilk.
Fixes#60666.
Built from https://develop.svn.wordpress.org/trunk@59139
git-svn-id: http://core.svn.wordpress.org/trunk@58535 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add an `h1` heading with the existing `login_header()` text string on each view of the login screen. Mark the existing `h1`, used to wrap the WordPress logo, with `role="presentation"`, to remove it from the headings hierarchy.
Props roytanck, joedolson, ryokuhi, sabernhardt, pamprn, nagpai, mukesh27.
Fixes#51786.
Built from https://develop.svn.wordpress.org/trunk@59138
git-svn-id: http://core.svn.wordpress.org/trunk@58534 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This updates several `devDependencies` to their latest versions:
- `autoprefixer` (`10.4.20`)
- `cssnano` (`7.0.6`)
- `grunt-contrib-qunit` (`10.1.1`)
- `grunt-webpack` (`7.0.0`)
- `postcss` (`8.4.47`)
- `qunit` (`2.22.0`)
- `sass` (`1.79.4`)
- `uuid` (`10.0.0`)
- `wait-on` (18.0.1`)
Also included are two minor updates to bundled dependencies:
- `json2php` (`0.0.9`)
- `wicg-inert` (`3.1.3`).
After applying these updates, `npm audit fix` and `grunt precommit:css` were run.
See #62137.
Built from https://develop.svn.wordpress.org/trunk@59135
git-svn-id: http://core.svn.wordpress.org/trunk@58531 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add an error notice if a user attempts to apply bulk edits with no items selected. Applies to post lists, comments, taxonomies, and plugins screens.
Props garrett-eclipse, nrqsnchz, sumitsingh, nihar007, royho, sabernhardt, oglekler, quadthemes, ankit-k-gupta, fnpen, ukdrahul, joedolson.
Fixes#45006, #58479.
Built from https://develop.svn.wordpress.org/trunk@59134
git-svn-id: http://core.svn.wordpress.org/trunk@58530 1a063a9b-81f0-0310-95a4-ce76da25c4cd
r59091 introduced a backward compatibility (BC) break for a static homepage that includes a shortcode's or block's with paginated content that uses the `'paged'` query var, e.g. bbPress.
In this use case, attempting to navigate the shortcode / block's pagination causes a canonical redirect, rather than navigating to the next page of content within that shortcode or block.
Follow-up to [59091].
Props davidbinda, jjj.
See #50163, #meta5184.
Built from https://develop.svn.wordpress.org/trunk@59133
git-svn-id: http://core.svn.wordpress.org/trunk@58529 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Typically, when registering a new block type, its metadata is read from the provided `block.json` file. The more block types are registered on a site, the more costly becomes this process, as it involves filesystem reads and parsing JSON.
WordPress Core's built-in blocks have in the past worked around that by having a auto-generated PHP manifest file that includes the already parsed JSON data for all blocks. This changeset effectively allows plugins to do the same, by introducing a new API function `wp_register_block_metadata_collection()`. The WordPress Core block manifest is now handled using this API as well, rather than custom logic baked into `register_block_type_from_metadata()`.
The `wp_register_block_metadata_collection()` function requires two parameters:
* `$path`: The base path in which block files for the collection reside.
* `$manifest`: The path to the manifest file for the collection.
Every `block.json` file that is supposed to be part of the collection must reside within the provided `$path`, within its own block-specific directory matching the block name (without the block namespace). For example, for a collection `$path` of `/wp-content/plugins/test-plugin` and a block `test-plugin/testimonial`, the block file could be `/wp-content/plugins/test-plugins/blocks/testimonial/block.json`.
It is recommended that plugins use the new API function for enhanced performance, especially if they register several block types. However, the use of the function is entirely optional. Not using it will not result in any difference in user-facing behavior.
Props mreishus, flixos90, gziolo, spacedmonkey, azaozz, mukesh27.
Fixes#62002.
Built from https://develop.svn.wordpress.org/trunk@59132
git-svn-id: http://core.svn.wordpress.org/trunk@58528 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Introduces the `wp_interactivity_get_element()` function to the Interactivity API, analogous to the `getElement()` function in the `@wordpress/interactivity` JavaScript module. This function allows access to the current element being processed during directive processing.
The function returns an array containing the `attributes` property, which includes only the originally defined attributes present on the element. Attributes added or modified by directive processing are not included. This is intended for use in derived state properties inside `wp_interactivity_state()`, similar to how `wp_interactivity_get_context()` is used.
Example usage:
```php
wp_interactivity_state( 'myPlugin', array(
'buttonText' => function() {
$context = wp_interactivity_get_context();
$element = wp_interactivity_get_element();
return isset( $context['buttonText'] )
? $context['buttonText']
: $element['attributes']['data-default-button-text'];
},
) );
```
Includes unit tests to cover the new functionality.
Props darerodz, swissspidy, cbravobernal, czapla.
Fixes#62136.
Built from https://develop.svn.wordpress.org/trunk@59131
git-svn-id: http://core.svn.wordpress.org/trunk@58527 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Moves the 'loading' and 'loaded' i18n strings for the `interactivity-router` to the script module data via the `script_module_data_@wordpress/interactivity-router` filter.
Key changes:
- Add the `filter_script_module_interactivity_router_data()` method, hooked into the `script_module_data_@wordpress/interactivity-router` filter, to set the `i18n` data with the 'loading' and 'loaded' messages.
- Rename the `print_router_loading_and_screen_reader_markup()` method to `print_router_markup()` and remove the screen reader markup from it because it's no longer needed.
- Deprecate the `print_router_loading_and_screen_reader_markup()` method.
- Remove the `loading` and `loaded` strings from the `core/router` store state because they're no longer needed.
- Initialize the `core/router` store with a minimal navigation object to prevent errors in the interactivity-router script module when the store is not properly initialized.
- Update corresponding unit tests to reflect these changes.
This change ensures that the `interactivity-router` i18n messages are localized in a single place and removes the need to initialize them in the `core/router` store state.
Props jonsurrell, swissspidy, czapla, gziolo.
See #60647.
Built from https://develop.svn.wordpress.org/trunk@59130
git-svn-id: http://core.svn.wordpress.org/trunk@58526 1a063a9b-81f0-0310-95a4-ce76da25c4cd
If sending an email to the site administrator's email address, look up if a user with the same email exists and switch to that user's locale.
If not, falls back to the site locale as usual.
Props benniledl, swissspidy, mukesh27.
Fixes#61518.
Built from https://develop.svn.wordpress.org/trunk@59128
git-svn-id: http://core.svn.wordpress.org/trunk@58524 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Some plugins and themes load translations too early, before the current user is known.
This happens either explicitly or through just-in-time translation loading.
If the current user (and thus their locale) is not known, WordPress might attempt to load translations in the wrong locale.
This change adds `_doing_it_wrong` messages to warn about such cases. It also helps avoiding accidentally trying to load translations twice (once just-in-time and once manually).
Projects triggering such a message are encourage to load translations no earlier than the `after_setup_theme` hook.
Props garrett-eclipse, Kau-Boy, swissspidy, johnbillion, alanfuller. rodelgc.
Fixes#44937.
Built from https://develop.svn.wordpress.org/trunk@59127
git-svn-id: http://core.svn.wordpress.org/trunk@58523 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Remove hardcoded path added in [57922] which ignored the fact that themes can also use script translations.
They should not be affected even if plugins are installed outside the typical `wp-content/plugins` location.
Props itapress, swissspidy.
Fixes#62016.
Built from https://develop.svn.wordpress.org/trunk@59126
git-svn-id: http://core.svn.wordpress.org/trunk@58522 1a063a9b-81f0-0310-95a4-ce76da25c4cd
If a prospective hooked block has its `multiple` block-supports field set to `false` (thus allowing only one instance of the block to be present), ensure that:
1. Only one instance of the block will be inserted if it's not yet present in the current context.
2. The block will not be inserted at all if an instance of it is already present in the current context.
As always in Block Hooks parlance, "context" denotes the containing template, template part, pattern, or navigation post that a hooked block is supposed to be inserted into.
The markup of a webpage that uses a Block Theme typically comprises a number of such contexts -- one template and any number of template parts, patterns, and navigation posts. Note that the limitation imposed by this changeset only applies on a per-context basis, so it's still possible that the resulting page contains more than one instance of a hooked block with `"multiple": false` set, as each context could contribute up to one such instance.
Props bernhard-reiter, jonsurrell, gziolo.
Fixes#61902.
Built from https://develop.svn.wordpress.org/trunk@59124
git-svn-id: http://core.svn.wordpress.org/trunk@58520 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds a `canUpdateBlockBindings` editor setting that allows to decide if the user is able to create and modify bindings through the UI. By default, only admin users can do it, but it can be overridden with `block_editor_settings_all` filter.
Props santosguillamot, gziolo, jorbin, noisysocks, matveb, cbravobernal, youknowriad, mamaduka, timothyblynjacobs, peterwilsoncc, drivingralle.
Fixes#61945.
Built from https://develop.svn.wordpress.org/trunk@59122
git-svn-id: http://core.svn.wordpress.org/trunk@58518 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Removes the automatic addition of `rel="noopener noreferrer"` from links targeting a new tab or window, `target='_blank'`. Since this was introduced, supported browsers have changed their security policies and no longer allow the opened link to have JavaScript access to the previous tab.
Deprecates:
* `wp_targeted_link_rel()`
* `wp_targeted_link_rel_callback()`
* `wp_init_targeted_link_rel_filters()`: converted to a noop function
* `wp_remove_targeted_link_rel_filters()`: converted to a noop function
The deprecated functions are retained in `formatting.php` as in `SHORTINIT` mode the file is included while `deprecated.php` is not.
This also removes the `noopener` from links hard coded within the WordPress dashboard linking to documentation and other resources.
Props audrasjb, azaozz, dhruval04, dorzki, neo2k23, presskopp, sabernhardt, swissspidy, tobiasbg.
Fixes#53843.
Built from https://develop.svn.wordpress.org/trunk@59120
git-svn-id: http://core.svn.wordpress.org/trunk@58516 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Introduces the filter `pre_attachment_url_to_postid` to allow developers to short-circuit the function `attachment_url_to_postid()`.
The return values are expected to be an attachment ID, zero (`0`) to indicate no attachment was found or `null` to indicate the function should proceed as usual.
The function performs an expensive database query so developers making use of the function frequently may wish to use a custom table with appropriate indexes to reduce the load on their database server.
Props antpb, apermo, audrasjb, joedolson.
Fixes#61383.
Built from https://develop.svn.wordpress.org/trunk@59118
git-svn-id: http://core.svn.wordpress.org/trunk@58514 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds a check for `ABSPATH` to the top of the `/wp-includes/blocks/index.php` file and prevents the file from loading if it is not defined.
This prevents the file from throwing errors when accessed directly.
Props khokansardar, mukesh27.
Fixes#62108.
See #60352.
Built from https://develop.svn.wordpress.org/trunk@59117
git-svn-id: http://core.svn.wordpress.org/trunk@58513 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Introduces post format support for both the Query Block with the new parameter `format`. In the `build_query_vars_from_query_block()` function, this is converted to a `post_format` taxonomy query passed to `WP_Query`.
Also introduces the `format` parameter to the REST API's Posts controller to support the feature in the Query block. The parameter type is an enumerated string accepted the post formats supported by each post type.
Props poena, mukesh27, mamaduka, noisysocks, TimothyBlynJacobs.
Fixes#62014.
Built from https://develop.svn.wordpress.org/trunk@59115
git-svn-id: http://core.svn.wordpress.org/trunk@58511 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This aims to make it easier to enter digits in datetime text fields on mobile devices, instead of opening the full keyboard.
Follow-up to [43], [1506], [2998], [3648], [6078], [6989], [7285], [7338], [20168], [20217], [28730], [32945], [49283].
Props sabernhardt.
Fixes#62109.
Built from https://develop.svn.wordpress.org/trunk@59114
git-svn-id: http://core.svn.wordpress.org/trunk@58510 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Change posts and comments pagination `nav` regions to have an aria-label of "Posts pagination" and "Comments pagination", respectively. This provides improved context for the numeric links contained within these regions and differentiates between posts navigation regions and posts pagination regions.
Props michaelbourne, sabernhardt, afercia, xyulex, webmandesign, tirth03, joedolson.
Fixes#54260.
Built from https://develop.svn.wordpress.org/trunk@59113
git-svn-id: http://core.svn.wordpress.org/trunk@58509 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add `get_user()` as an alias for `get_user_by( 'id', $user_id )`. Add `get_user()` to `user.php` so it is not a pluggable function. Bring parity with other standard `get_` functions for a more intuitive developer experience.
Props sc0ttkclark, kushang78, joedolson, peterwilsoncc.
Fixes#35124.
Built from https://develop.svn.wordpress.org/trunk@59111
git-svn-id: http://core.svn.wordpress.org/trunk@58507 1a063a9b-81f0-0310-95a4-ce76da25c4cd
PHP 8.4 deprecates the use of `trigger_errror()` with `E_USER_ERROR` as the error level, as there are a number of gotchas to this way of creating a `Fatal Error` (`finally` blocks not executing, destructors not executing).
The recommended replacements are either to use exceptions or to do a hard `exit`.
As this is a test-only class, do not have to take BC-breaks into account.
Also, as this is a test helper, throwing a exception is the most appropriate solution.
Reference:
* https://wiki.php.net/rfc/deprecations_php_8_4#deprecate_passing_e_user_error_to_trigger_error
Follow-up to [25002].
Props jrf.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59109
git-svn-id: http://core.svn.wordpress.org/trunk@58505 1a063a9b-81f0-0310-95a4-ce76da25c4cd
PHP 8.4 deprecates the use of `trigger_errror()` with `E_USER_ERROR` as the error level, as there are a number of gotchas to this way of creating a `Fatal Error` (`finally` blocks not executing, destructors not executing).
The recommended replacements are either to use exceptions or to do a hard `exit`.
As this is a test-only class, do not have to take BC-breaks into account.
Also, as this is a test helper, throwing a exception is the most appropriate solution.
Reference:
* https://wiki.php.net/rfc/deprecations_php_8_4#deprecate_passing_e_user_error_to_trigger_error
Follow-up to [49230].
Props jrf.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59108
git-svn-id: http://core.svn.wordpress.org/trunk@58504 1a063a9b-81f0-0310-95a4-ce76da25c4cd
PHP 8.4 deprecates the use of `trigger_errror()` with `E_USER_ERROR` as the error level, as there are a number of gotchas to this way of creating a `Fatal Error` (`finally` blocks not executing, destructors not executing). The recommended replacements are either to use exceptions or to do a hard `exit`.
WP has its own `wp_trigger_error()` function, which under the hood calls `trigger_error()`. If passed `E_USER_ERROR` as the `$error_level`, this will hit the PHP 8.4 deprecation.
Now, there were basically three options:
* Silence the deprecation until PHP 9.0 and delay properly solving this until then. This would lead to an awkward solution, as prior to PHP 8.0, error silencing would apply to all errors, while, as of PHP 8.0, it will no longer apply to fatal errors. It also would only buy us some time and wouldn't actually solve anything.
* Use `exit($status)` when `wp_trigger_error()` is called with `E_USER_ERROR`. This would make the code untestable and would disable handling of these errors via custom error handlers, which makes this an undesirable solution.
* Throw an exception when `wp_trigger_error()` is called with `E_USER_ERROR`. This makes for the most elegant solution with the least BC-breaking impact, though it does open it up to the error potential being "caught" via a `try-catch`. That's not actually a bad thing and is likely to only happen for those errors which can be worked around, in which case, it's a bonus that that's now possible.
The third option is implemented which:
* Introduces a new `WP_Exception` class.
* Starts using `WP_Exception` in the `wp_trigger_error()` function when the `$error_level` is set to `E_USER_ERROR`.
This change is covered by pre-existing tests, which have been updated to expect the exception instead of a PHP error.
Why not use `WP_Error`?
Well, for one, this would lead to completely different behaviour (BC).
As `WP_Error` doesn't extend `Exception`, the program would not be stopped, but would continue running, which would be a much bigger breaking change and carries security risks. `WP_Error` also doesn't natively trigger displaying/logging of the error message, so in that case, it would still need an `exit` with the error message, bringing us back to point 2 above.
Introducing `WP_Exception` provides (essentially) the same behaviour in that it retains the fatal error and error message displaying/logging behaviors. It also introduces a base Exception class, from which future exception classes can extend.
References:
* https://wiki.php.net/rfc/deprecations_php_8_4#deprecate_passing_e_user_error_to_trigger_error
* https://www.php.net/manual/en/migration80.incompatible.php
Follow-up to [56530].
Props jrf, hellofromTonya.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59107
git-svn-id: http://core.svn.wordpress.org/trunk@58503 1a063a9b-81f0-0310-95a4-ce76da25c4cd
PHP 8.4 deprecates the use of `trigger_errror()` with `E_USER_ERROR` as the error level, as there are a number of gotchas to this way of creating a `Fatal Error` (`finally` blocks not executing, destructors not executing).
The recommended replacements are either to use exceptions or to do a hard `exit`.
This is an unmaintained external dependency; thus, the fix is made in the WP specific copy of the dependency.
As `trigger_error()` call looks to be a remnant of the PHP 4 era before a class could be declared as `abstract`, fixed by making both the method as well as the class `abstract` and removing the call to `trigger_error()`.
Ref:
* https://wiki.php.net/rfc/deprecations_php_8_4#deprecate_passing_e_user_error_to_trigger_error
* https://www.php.net/manual/en/migration80.incompatible.php
Follow-up to [7747].
Props jrf.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59106
git-svn-id: http://core.svn.wordpress.org/trunk@58502 1a063a9b-81f0-0310-95a4-ce76da25c4cd
PHP 8.4 deprecates the use of `trigger_errror()` with `E_USER_ERROR` as the error level, as there are a number of gotchas to this way of creating a `Fatal Error` (`finally` blocks not executing, destructors not executing). The recommended replacements are either to use exceptions or to do a hard `exit`.
This is an unmaintained external dependency; thus, the fix is made in the WP specific copy of the dependency.
Now, there were basically three options:
* Silence the deprecation until PHP 9.0 and delay properly solving this until then.
This would lead to an awkward solution, as prior to PHP 8.0, error silencing would apply to all errors, while, as of PHP 8.0, it will no longer apply to fatal errors.
It also would only buy us some time and wouldn't actually solve anything.
* Use `exit($status)`.
This would make the code untestable and would disable handling of these errors via custom error handlers, which makes this an undesirable solution.
* Throw an exception.
This makes for the most elegant solution with the least BC-breaking impact.
The third option is implemented which:
* Introduces a new `Text_Exception` class.
* Starts using that in the `Text_Diff::_check()` method in all applicable places.
* Adds tests for the first two error conditions.
References:
* https://wiki.php.net/rfc/deprecations_php_8_4#deprecate_passing_e_user_error_to_trigger_error
* https://www.php.net/manual/en/migration80.incompatible.php
Follow-up to [59070], [52978], [7747].
Props jrf.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59105
git-svn-id: http://core.svn.wordpress.org/trunk@58501 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In the Patterns registry, use `apply_block_hooks_to_content` (introduced in [58291]) instead of the `WP_Block_Patterns_Registry` class's private `get_content` method. (The latter is removed as part of this changeset.)
In a similar vein, use `apply_block_hooks_to_content` in the `_build_block_template_result_from_file` and `_build_block_template_result_from_post` functions, respectively.
For that to work, `apply_block_hooks_to_content` is amended to inject the `theme` attribute into Template Part blocks, even if no hooked blocks are present.
This kind of centralization is required as a preparation for #61902.
Props bernhard-reiter, jonsurrell.
See #61902.
Built from https://develop.svn.wordpress.org/trunk@59101
git-svn-id: http://core.svn.wordpress.org/trunk@58497 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is the seventh part in a larger modularization of the data in `WP_Debug_Data`. Previously this was a single massive method drawing in debug data from various groups of related data, where the groups were independent from each other.
This patch separates the seventh of twelve groups, the `wp-dropins` info, into a separate method focused on that data.
This work precedes changes to make the `WP_Debug_Data` class more extensible for better use by plugin and theme code.
Developed in https://github.com/wordpress/wordpress-develop/pull/7418
Discussed in https://core.trac.wordpress.org/ticket/61648
Props apermo.
See #61648.
Built from https://develop.svn.wordpress.org/trunk@59100
git-svn-id: http://core.svn.wordpress.org/trunk@58496 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When encountering inline SVG and MathML content in an HTML document, there are certain "integration points" which transition back into the HTML parsing ruleset. Previously, the HTML API was incorrectly switching into the namespace of the element transitioning into that ruleset.
In this patch, the correct transition is made, where all integration points refer to HTML rules, while non-integration points refer to the rules of the namespace corresponding to the token itself.
Developed in https://github.com/wordpress/wordpress-develop/pull/7425
Discussed in https://core.trac.wordpress.org/ticket/61576
Props dmsnell, jonsurrell.
See #61576.
Built from https://develop.svn.wordpress.org/trunk@59099
git-svn-id: http://core.svn.wordpress.org/trunk@58495 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Moves the 'loading' and 'loaded' i18n strings for the `interactivity-router` to the script module data via the `script_module_data_@wordpress/interactivity-router` filter.
Key changes:
- Add the `filter_script_module_interactivity_router_data()` method, hooked into the `script_module_data_@wordpress/interactivity-router` filter, to set the `i18n` data with the 'loading' and 'loaded' messages.
- Rename the `print_router_loading_and_screen_reader_markup()` method to `print_router_markup()` and remove the screen reader markup from it because it's no longer needed.
- Remove the `loading` and `loaded` strings from the `core/router` store state because they're no longer needed.
- Initialize the `core/router` store with a minimal navigation object to prevent errors in the interactivity-router script module when the store is not properly initialized.
- Update corresponding unit tests to reflect these changes.
This change ensures that the `interactivity-router` i18n messages are localized in a single place and removes the need to initialize them in the `core/router` store state.
Props jonsurrell, swissspidy, czapla.
See #60647.
Built from https://develop.svn.wordpress.org/trunk@59097
git-svn-id: http://core.svn.wordpress.org/trunk@58493 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Fixes an issue with the image block when using pattern overrides, where the image block with overrides enabled was not outputting all the expected image attributes. Ensures that the `process_block_bindings` method returns any updates to the block's binding metadata along with other computed attributes.
Props talldanwp, cbravobernal, santosguillamot, mukesh27, gziolo.
Fixes#62069.
Built from https://develop.svn.wordpress.org/trunk@59095
git-svn-id: http://core.svn.wordpress.org/trunk@58491 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Ensures that the default values defined in the schema for block attributes are used when rendering the output of the block with `get_block_wrapper_attributes` helper.
Props gziolo, jonsurrell, youknowriad, ryelle.
Fixes#62114.
Built from https://develop.svn.wordpress.org/trunk@59093
git-svn-id: http://core.svn.wordpress.org/trunk@58489 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Perform a canonical redirect for an invalid pagination request of a static front page.
When a site has a static front page assigned and that page has a `<!--nextpage-->` within its content, previously accessing non-existing pages (e.g. `example.com/page/3/`) did not redirect or return a 404 or 301. This changeset resolves that issue by performing a canonical redirect.
Unit tests are also included for this specific use case and to ensure the fix does not affect a blog listing home page.
Follow-up to [47738], [47727], [34492].
Props dd32, audrasjb, chaion07, hellofromTonya, joemcgill, lukecarbis, Mte90, mukesh27, peterwilsoncc, rajinsharwar, SergeyBiryukov.
Fixes#50163.
See meta#5184.
Built from https://develop.svn.wordpress.org/trunk@59091
git-svn-id: http://core.svn.wordpress.org/trunk@58487 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The Script Module has the same API as the `wp-a11y` WP Script.
Key changes:
- Add `@wordpress/a11y` to the list of Script and Module dual packages.
- Update `script-modules-packages.min.php` to include the a11y module.
- Modify `WP_Script_Modules` class to track and handle a11y module availability.
- Add method to print required HTML markup for a11y `speak()` functionality.
See #60647.
Props jonsurrell, gziolo, czapla.
Built from https://develop.svn.wordpress.org/trunk@59089
git-svn-id: http://core.svn.wordpress.org/trunk@58485 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This allows other users of the WordPress unit test suite framework to run their own unit tests without needing the WordPress Importer plugin, which should only be a requirement if running core tests.
Follow-up to [59085].
Props bjorsch.
Fixes#62106.
Built from https://develop.svn.wordpress.org/trunk@59086
git-svn-id: http://core.svn.wordpress.org/trunk@58482 1a063a9b-81f0-0310-95a4-ce76da25c4cd
If a hard requirement for the test suite is not fulfilled, running the tests should be blocked from the test bootstrap. A test should only fail when it doesn't produce the expected result.
Since the WordPress Importer plugin is considered a hard requirement for the test suite at this time, this commit moves the check whether the plugin is installed from individual tests to the test bootstrap.
Includes defining a global constant for the path to the file for reuse in the tests.
Reference: [https://make.wordpress.org/core/handbook/contribute/git/#unit-tests Core Contributor Handbook: The Code Repository (Git): Unit Tests].
Follow-up to [40531], [40532], [41090], [41169], [48592], [49535], [49571].
Props jrf, hellofromTonya.
See #61530.
Built from https://develop.svn.wordpress.org/trunk@59085
git-svn-id: http://core.svn.wordpress.org/trunk@58481 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [50030] we enforced that Application Passwords have unique names. This was done with the assumption that applications would not connect to a user multiple times. However, in practice we've seen applications run into issues with the unique name constraint. Depending on the app, they may not know if they've been authorized before, or they may intentionally allow connecting multiple times. To prevent friction, App developers need to make their App Name unique, and in doing so often include things like the current date & time, which is already included in the App Passwords list table.
This commit removes this requirement to simplify usage of the Authorize Application flow.
Props mark-k, Boniu91, timothyblynjacobs, peterwilsoncc.
Fixes#54213.
Built from https://develop.svn.wordpress.org/trunk@59084
git-svn-id: http://core.svn.wordpress.org/trunk@58480 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is a companion to https://github.com/WordPress/gutenberg/pull/65460 that requires syncing in WordPress Core. Namely, the block-library changes require registration with their updated script module IDs so that the blocks continue to work correctly.
They key improvement is script modules registration is handled in one central place, and a combined asset file is used to improve the performance by avoiding multiple disk operations for every individual file.
Props jonsurrell, gziolo, wildworks, noisysocks.
See #60647, #59462.
Built from https://develop.svn.wordpress.org/trunk@59083
git-svn-id: http://core.svn.wordpress.org/trunk@58479 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Composer 1.10.0 introduced a `lock` config option, which, when set to `false` will prevent a `composer.lock` file from being created and will ignore it when one exists.
This is a useful option for packages like WordPress where the `lock` file has no meaning.
It also makes life more straightforward for contributors as they don't have to remember that for this repo they should use `composer update` instead of `composer install`. Both will now work the same.
Reference: [https://getcomposer.org/doc/06-config.md#lock Composer Documentation: Config: lock].
Follow-up to [51543].
Props jrf.
See #61530.
Built from https://develop.svn.wordpress.org/trunk@59082
git-svn-id: http://core.svn.wordpress.org/trunk@58478 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Removes query alteration from `build_comment_query_vars_from_block` by introducing a new way to pass the `$page` as argument to functions handling pagination for the comments.
Props cybr, santosguillamot, bernhard-reiter, gziolo.
Fixes#60806.
Built from https://develop.svn.wordpress.org/trunk@59081
git-svn-id: http://core.svn.wordpress.org/trunk@58477 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Extends block context during block bindings processing. This implies that the context is extended ONLY for the blocks where bindings are defined and only when rendered on the page.
Props santosguillamot, gziolo, artemiosans, cbravobernal.
Fixes#61642.
Built from https://develop.svn.wordpress.org/trunk@59080
git-svn-id: http://core.svn.wordpress.org/trunk@58476 1a063a9b-81f0-0310-95a4-ce76da25c4cd
HTML often appears in ways that are unexpected. It may be missing implicit tags, may have unquoted, single-quoted, or double-quoted attributes, may contain duplicate attributes, may contain unescaped text content, or any number of other possible invalid constructions. The HTML API understands all fo these inputs, but downline parsers may not, and HTML snippets which are safe on their own may introduce problems when joined with other HTML snippets.
This patch introduces the `serialize()` method on the HTML Processor, which prints a fully-normative HTML output, eliminating invalid markup along the way. It produces a string which contains every missing tag, double-quoted attributes, and no duplicates. A `normalize()` static method on the HTML Processor provides a convenient wrapper for constructing a fragment parser and immediately serializing.
Subclasses relying on the `serialize_token()` method may perform structural HTML modifications with as much security as the upcoming `\Dom\HTMLDocument()` parser will, though these are not
able to provide the full safety that will eventually appear with `set_inner_html()`.
Further work may explore serializing to XML (which involves a number of other important transformations) and adding constraints to serialization (such as only allowing inline/flow/formatting elements and text).
Developed in https://github.com/wordpress/wordpress-develop/pull/7331
Discussed in https://core.trac.wordpress.org/ticket/62036
Props dmsnell, jonsurrell, westonruter.
Fixes#62036.
Built from https://develop.svn.wordpress.org/trunk@59076
git-svn-id: http://core.svn.wordpress.org/trunk@58472 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, there were a few cases where the modifiable text read from an HTML comment differs slightly from the parsed value of its inner text in a browser. This is due to the specific way that invalid HTML syntax tokens become "bogus comments."
This patch introduces a new method to the Tag Processor to allow differentiating these specific cases, such as when copying or serializing HTML from one source to another. Similar code has already been in use in the html5lib tests, and this patch simplifies the test runner, evidencing the fact that this method was already needed.
Developed in https://github.com/wordpress/wordpress-develop/pull/7342
Discussed in https://core.trac.wordpress.org/ticket/62036
Props dmsnell, jonsurrell.
See #62036.
Built from https://develop.svn.wordpress.org/trunk@59075
git-svn-id: http://core.svn.wordpress.org/trunk@58471 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that the function applies the `wp_editor_settings` filter and merges the resulting array with the rest of TinyMCE init settings.
Includes a unit test to verify that the settings are merged correctly after adding the assignment of `array_merge()` result that was missed in the initial commit.
Follow-up to [44265], [59033].
Props kkmuffme, akshat2802, davidbaumwald, SergeyBiryukov.
Fixes#61754.
Built from https://develop.svn.wordpress.org/trunk@59074
git-svn-id: http://core.svn.wordpress.org/trunk@58470 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Expands tests to ensure the version number of packages updated via NPM matches the version number used for registering the script in the script loader.
This adds tests for (by their registered name in WordPress):
* backbone
* clipboard
* hoverIntent
* hoverintent-js
* imagesloaded
* jquery-color
* jquery-core
* jquery-form
* masonry
* react-jsx-runtime
* underscore
* wp-polyfill-dom-rect
* wp-polyfill-element-closest
* wp-polyfill-fetch
* wp-polyfill-formdata
* wp-polyfill-inert
* wp-polyfill-node-contains
* wp-polyfill-object-fit
* wp-polyfill-url
This expands on the earlier tests introduced for:
* lodash
* moment
* react
* react-dom
* regenerator-runtime
An additional test is added to ensure that the data provider for these tests is maintained as libraries are added via package.json.
`@wordpress/*` scripts are excluded from these tests as wp-scripts generates a version number automatically based on the file's contents.
Additionally, the version of element-closest listed in package.json is updated to use a fixed version rather than a range. This reflects the current practice of WordPress to define the specific version in core. For the avoidance of doubt, this does not affect the version shipped in WordPress.
Follow up to [57185].
Props peterwilsoncc, jorbin.
Fixes#61855.
Built from https://develop.svn.wordpress.org/trunk@59071
git-svn-id: http://core.svn.wordpress.org/trunk@58467 1a063a9b-81f0-0310-95a4-ce76da25c4cd
On the first `foreach` loop in Text_Diff::_check()`, `$prevtype` is `null`. As `instanceof` requires the class name term to be an object or string, a fatal error is thrown:
>Fatal error: Uncaught Error: Class name must be a valid object or a string on line 279
This change:
* Adds a simple test for the `Text_Diff::_check()` method, which is how the bug was discovered as the test could never pass with the code as-is.
* Adds a defensive guard to protect against the fatal. It checks if `$prevtype` is not `null` as a pre-condition to for checking the instance. This bugfix also resolves the failing test.
Follow-up to [49194], [7747].
Props jrf, hellofromTonya.
See #62083.
Built from https://develop.svn.wordpress.org/trunk@59070
git-svn-id: http://core.svn.wordpress.org/trunk@58466 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `mysqli_ping()` function is deprecated as of PHP 8.4, though, in reality, the function wasn't working according to spec anymore since PHP 8.2 when the `libmysql` driver was dropped in favour of `libmysqlnd`, which was already the default (and recommended) driver since PHP 5.4.
The `mysqli_ping()` method was also not really correctly named as its functionality was to reconnect to the database, not just ping.
The alternative is to "manually" ping the database by sending a `DO 1` query (the cheapest possible SQL query).
Adding a PHP version based toggle was considered, but as mentioned above, the default driver has been `libmysqlnd` since PHP 5.4 and in that case, the function never worked anyway, so in reality `mysqli_ping()` was only really functional for the odd custom PHP compilation where `mysqli` was build against `libmysql` AND `reconnect` was not disabled.
With this in mind, this change replaces the call to `mysqli_ping()` with the `DO 1` query completely. If that query succeeds, it concludes the database connection is still alive. This solution should be the most stable as it will work for both PHP 7.2 <= 8.1, independently of which driver `mysqli` was compiled with, as well as for PHP 8.2+.
Note: It could also be considered to remove the function call to `mysqli_ping()` completely and rely on standard error handling in case the connection would have dropped, as after all, the fact that the connection existed at the moment the "ping" happened, is no guarantee that the connection will still exist when the next query is send.... this approach was not chosen so as WP has custom error handling and does not use the PHP native mysqli exceptions for this, which would make implementing this more awkward.
Includes a test to verify that the connection check works when there is a valid connection (this was previously not covered by tests).
Refs:
* https://wiki.php.net/rfc/deprecations_php_8_4#mysqli_ping_and_mysqliping
* https://github.com/php/php-src/pull/11912#issuecomment-1671762583
* https://stackoverflow.com/questions/2546868/cheapest-way-to-determine-if-a-mysql-connection-is-still-alive/2546922#2546922
* php/php-src#11945
* https://wiki.php.net/rfc/mysqli_support_for_libmysql
* https://www.php.net/mysqli_ping
Follow-up to [56475], [27250], [27075].
Props jrf, hellofromTonya.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59069
git-svn-id: http://core.svn.wordpress.org/trunk@58465 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset updates Twenty Twenty-Three and Twenty Twenty-Four and replaces text strings in HTML files with patterns to make the strings translatable.
Follow-up to [58459].
Props sabernhardt, karmatosed, iflairwebtechnologies, poena.
Fixes#61951.
Built from https://develop.svn.wordpress.org/trunk@59065
git-svn-id: http://core.svn.wordpress.org/trunk@58461 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Prevents a potential type errors when making use of the `gmt_offset` option by casting the value to a float prior to performing calculations with the value.
This mainly accounts for incorrect storage of values, such as an empty string or city name.
Follow up to [58923].
Props chaion07, hellofromtonya, kirasong, mhshohel, mukesh27, nicolefurlan, nihar007, nurielmeni, oglekler, peterwilsoncc, prionkor, rajinsharwar, rarst, rleeson, sabernhardt, SergeyBiryukov, swissspidy, toastercookie, verygoode.
Fixes#56358, #58986, #60629.
Built from https://develop.svn.wordpress.org/trunk@59064
git-svn-id: http://core.svn.wordpress.org/trunk@58460 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The XML Parser extension still supports a quite dated mechanism for method based callbacks, where the object is first set via `xml_set_object()` and the callbacks are then set by passing only the name of the method to the relevant parameters on any of the `xml_set_*_handler()` functions.
{{{
xml_set_object( $parser, $my_obj );
xml_set_character_data_handler( $parser, 'method_name_on_my_obj' );
}}}
Passing proper callables to the `xml_set_*_handler()` functions has been supported for the longest time and is cross-version compatible. So the above code is 100% equivalent to:
{{{
xml_set_character_data_handler( $parser, [$my_obj, 'method_name_on_my_obj'] );
}}}
The mechanism of setting the callbacks with `xml_set_object()` has now been deprecated as of PHP 8.4, in favour of passing proper callables to the `xml_set_*_handler()` functions. This is also means that calling the `xml_set_object()` function is deprecated as well.
This commit fixes this deprecation for the `MagpieRSS::__construct()` method.
The change has not been not covered by tests. This class has been deprecated since WP 3.0.0 and is not covered by tests at all. Adding those now seems superfluous, all the more as the principle of the fix is no different than for the other files, so we can be sure it works anyway.
Note: Though this is "officially" an external library, this package is no longer externally maintained. The code style of the fix in the source file is in line with the existing code style for the file.
Refs:
* https://wiki.php.net/rfc/deprecations_php_8_4#xml_set_object_and_xml_set_handler_with_string_method_names
* https://www.php.net/manual/en/function.xml-set-object.php
* https://www.php.net/manual/en/ref.xml.php
Follow-up to [4399].
Props jrf.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59063
git-svn-id: http://core.svn.wordpress.org/trunk@58459 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The XML Parser extension still supports a quite dated mechanism for method based callbacks, where the object is first set via `xml_set_object()` and the callbacks are then set by passing only the name of the method to the relevant parameters on any of the `xml_set_*_handler()` functions.
{{{
xml_set_object( $parser, $my_obj );
xml_set_character_data_handler( $parser, 'method_name_on_my_obj' );
}}}
Passing proper callables to the `xml_set_*_handler()` functions has been supported for the longest time and is cross-version compatible. So the above code is 100% equivalent to:
{{{
xml_set_character_data_handler( $parser, [$my_obj, 'method_name_on_my_obj'] );
}}}
The mechanism of setting the callbacks with `xml_set_object()` has now been deprecated as of PHP 8.4, in favour of passing proper callables to the `xml_set_*_handler()` functions. This is also means that calling the `xml_set_object()` function is deprecated as well.
This commit fixes this deprecation for the `AtomParser::parse()` method.
This change is safeguarded via the new `AtomParser_Parse_Test` class.
Notes:
* Though this is "officially" an external library, this package is no longer externally maintained. The code style of the fix in the source file is in line with the existing code style for the file.
* It appears that this class is not actually used by WP Core itself, so it could be considered to deprecate the class. However, as the class is not currently deprecated, safeguarding the change with a test seemed prudent.
* The fixture used for the test reuses a fixture from the original package: https://code.google.com/archive/p/phpatomlib/source/default/source
* The new test class follows the recommended test format (naming convention of the class, `@covers` tag at class level, only testing one method) as per Trac tickets 62004 / 53010.
Refs:
* https://wiki.php.net/rfc/deprecations_php_8_4#xml_set_object_and_xml_set_handler_with_string_method_names
* https://www.php.net/manual/en/function.xml-set-object.php
* https://www.php.net/manual/en/ref.xml.php
Follow-up to [5951].
Props jrf.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59062
git-svn-id: http://core.svn.wordpress.org/trunk@58458 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Use `WP_UnitTestCase_Base::assertSamePathIgnoringDirectorySeparators()` and `WP_UnitTestCase_Base::normalizeDirectorySeparatorsInPath()` in existing tests.
Follow-up to [59057], [57753], [57215], [56635], [48937], [25002].
Props jrf.
See #61530.
Built from https://develop.svn.wordpress.org/trunk@59061
git-svn-id: http://core.svn.wordpress.org/trunk@58457 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is the sixth part in a larger modularization of the data in `WP_Debug_Data`. Previously this was a single massive method drawing in debug data from various groups of related data, where the groups were independent from each other.
This patch separates the sixth of twelve groups, the `wp-media` info, into a separate method focused on that data.
This work precedes changes to make the `WP_Debug_Data` class more extensible for better use by plugin and theme code.
Developed in https://github.com/wordpress/wordpress-develop/pull/7356
Discussed in https://core.trac.wordpress.org/ticket/61648
Props apermo, dmsnell.
See #61648.
Built from https://develop.svn.wordpress.org/trunk@59060
git-svn-id: http://core.svn.wordpress.org/trunk@58456 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Dynamic (non-explicitly declared) properties are deprecated as of PHP 8.2 and are expected to become a fatal error in PHP 9.0.
There are a number of ways to mitigate this:
* If it's an accidental typo for a declared property: fix the typo.
* For known properties: declare them on the class.
* For unknown properties: add the magic `__get()`, `__set()` et al methods to the class or let the class extend `stdClass` which has highly optimized versions of these magic methods build in.
* For unknown _use of_ dynamic properties, the `#[AllowDynamicProperties]` attribute can be added to the class. The attribute will automatically be inherited by child classes.
In this case, the property added are explicitly referenced in this class, so fall in the "known property" category.
Refs:
* https://wiki.php.net/rfc/deprecate_dynamic_properties
Props jrf.
See #56034.
Built from https://develop.svn.wordpress.org/trunk@59058
git-svn-id: http://core.svn.wordpress.org/trunk@58454 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Introduces `WP_UnitTestCase_Base::assertSamePathIgnoringDirectorySeparators()` and an associated helper method `WP_UnitTestCase_Base::normalizeDirectorySeparatorsInPath()` to allow for comparing two file path strings independently of OS-specific differences.
The normalization is done in a separate method to also allow this method to be used for path normalization within test methods themselves, like for normalizing a group of paths in an array.
The pretty specific method name for the helper (`normalizeDirectorySeparatorsInPath()`) is an attempt to prevent naming conflicts with methods which may exist in plugin test suites build on top of the WP Core test suite.
Props jrf, hellofromTonya.
See #61530.
Built from https://develop.svn.wordpress.org/trunk@59057
git-svn-id: http://core.svn.wordpress.org/trunk@58453 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The XML Parser extension still supports a quite dated mechanism for method based callbacks, where the object is first set via `xml_set_object()` and the callbacks are then set by passing only the name of the method to the relevant parameters on any of the `xml_set_*_handler()` functions.
{{{
xml_set_object( $parser, $my_obj );
xml_set_character_data_handler( $parser, 'method_name_on_my_obj' );
}}}
Passing proper callables to the `xml_set_*_handler()` functions has been supported for the longest time and is cross-version compatible. So the above code is 100% equivalent to:
{{{
xml_set_character_data_handler( $parser, [$my_obj, 'method_name_on_my_obj'] );
}}}
The mechanism of setting the callbacks with `xml_set_object()` has now been deprecated as of PHP 8.4, in favour of passing proper callables to the `xml_set_*_handler()` functions. This is also means that calling the `xml_set_object()` function is deprecated as well.
This commit fixes this deprecation for the `IXR_Message::parse()` method.
This change is safeguarded via the new`Tests_XMLRPC_Message::test_parse_sets_handlers()` test method.
Note: Though this is "officially" an external library, this package is no longer externally maintained. The code style of the fix in the source file is in line with the existing code style for the file.
Refs:
* https://wiki.php.net/rfc/deprecations_php_8_4#xml_set_object_and_xml_set_handler_with_string_method_names
* https://www.php.net/manual/en/function.xml-set-object.php
* https://www.php.net/manual/en/ref.xml.php
Follow-up to [15612], [1346].
Props jrf, hellofromTonya.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59056
git-svn-id: http://core.svn.wordpress.org/trunk@58452 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The XML Parser extension still supports a quite dated mechanism for method based callbacks, where the object is first set via `xml_set_object()` and the callbacks are then set by passing only the name of the method to the relevant parameters on any of the `xml_set_*_handler()` functions.
{{{
xml_set_object( $parser, $my_obj );
xml_set_character_data_handler( $parser, 'method_name_on_my_obj' );
}}}
Passing proper callables to the `xml_set_*_handler()` functions has been supported for the longest time and is cross-version compatible. So the above code is 100% equivalent to:
{{{
xml_set_character_data_handler( $parser, [$my_obj, 'method_name_on_my_obj'] );
}}}
The mechanism of setting the callbacks with `xml_set_object()` has now been deprecated as of PHP 8.4, in favour of passing proper callables to the `xml_set_*_handler()` functions. This is also means that calling the `xml_set_object()` function is deprecated as well.
This commit fixes this deprecation for the `TestXMLParser` helper utility. In this case, the callbacks were already using the recommended format and the call to `xml_set_object()` was completely redundant.
As this is a test utility and was already causing pre-existing tests using the utility to fail, there is no need for dedicated tests to cover this change.
Refs:
* https://wiki.php.net/rfc/deprecations_php_8_4#xml_set_object_and_xml_set_handler_with_string_method_names
* https://www.php.net/manual/en/function.xml-set-object.php
* https://www.php.net/manual/en/ref.xml.php
Follow-up to [25002].
Props jrf.
See #62061.
Built from https://develop.svn.wordpress.org/trunk@59055
git-svn-id: http://core.svn.wordpress.org/trunk@58451 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Peter Wilson
Sergey Biryukov
Andrew Ozz
Joe McGill
desrosj
gziolo
Bernhard Reiter
Adam Silverstein
cbravobernal
ryelle
kevin940726
Pascal Birchler
joedolson
Tammie Lister
Felix Arntz
John Blackbourn
andrewserong
Aaron Jorbin
noisysocks
dmsnell
czapla
hellofromTonya
audrasjb
TimothyBlynJacobs
poena
Drew Jaynes
.jpg){kind=link}