diff --git a/Rakefile b/Rakefile new file mode 100644 index 0000000..f8e0550 --- /dev/null +++ b/Rakefile @@ -0,0 +1,9 @@ +begin + require 'bundler/setup' +rescue LoadError + puts 'You must `gem install bundler` and `bundle install` to run rake tasks' +end + +APP_RAKEFILE = File.expand_path("../spec/test_app/Rakefile", __FILE__) +load 'rails/tasks/engine.rake' +load 'rails/tasks/statistics.rake' diff --git a/lib/choice.rb b/lib/choice.rb new file mode 100644 index 0000000..f22e582 --- /dev/null +++ b/lib/choice.rb @@ -0,0 +1,6 @@ +require 'choice/engine' + +byebug + +module Choice +end diff --git a/spec/controllers/choice/choice_controller_spec.rb b/spec/controllers/choice/choice_controller_spec.rb new file mode 100644 index 0000000..efe9d73 --- /dev/null +++ b/spec/controllers/choice/choice_controller_spec.rb @@ -0,0 +1,9 @@ +# require 'rails_helper' + +module Choice + RSpec.describe 'ChoiceController', type: :controller do + it do + expect(Choice::ChoiceController).to be_truthy + end + end +end diff --git a/spec/rails_helper.rb b/spec/rails_helper.rb new file mode 100644 index 0000000..a72b050 --- /dev/null +++ b/spec/rails_helper.rb @@ -0,0 +1,58 @@ +# This file is copied to spec/ when you run 'rails generate rspec:install' +ENV['RAILS_ENV'] ||= 'test' +require File.expand_path("../test_app/config/environment", __FILE__) +abort("The Rails environment is running in production mode!") if Rails.env.production? +require 'spec_helper' +require 'rspec/rails' + +# Add additional requires below this line. Rails is not loaded until this point! + +# Requires supporting ruby files with custom matchers and macros, etc, in +# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are +# run as spec files by default. This means that files in spec/support that end +# in _spec.rb will both be required and run as specs, causing the specs to be +# run twice. It is recommended that you do not name files matching this glob to +# end with _spec.rb. You can configure this pattern with the --pattern +# option on the command line or in ~/.rspec, .rspec or `.rspec-local`. +# +# The following line is provided for convenience purposes. It has the downside +# of increasing the boot-up time by auto-requiring all files in the support +# directory. Alternatively, in the individual `*_spec.rb` files, manually +# require only the support files necessary. +# +# Dir[Rails.root.join('spec/support/**/*.rb')].each { |f| require f } +# require 'support/helpers/fixtures' + +# Checks for pending migration and applies them before tests are run. +# If you are not using ActiveRecord, you can remove this line. +# ActiveRecord::Migration.maintain_test_schema! + +RSpec.configure do |config| + # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures + # config.fixture_path = "#{::Rails.root}/spec/fixtures" + + # If you're not using ActiveRecord, or you'd prefer not to run each of your + # examples within a transaction, remove the following line or assign false + # instead of true. + # config.use_transactional_fixtures = true + + # RSpec Rails can automatically mix in different behaviours to your tests + # based on their file location, for example enabling you to call `get` and + # `post` in specs under `spec/controllers`. + # + # You can disable this behaviour by removing the line below, and instead + # explicitly tag your specs with their type, e.g.: + # + # RSpec.describe UsersController, :type => :controller do + # # ... + # end + # + # The different available types are documented in the features, such as in + # https://relishapp.com/rspec/rspec-rails/docs + config.infer_spec_type_from_file_location! + + # Filter lines from Rails gems in backtraces. + config.filter_rails_from_backtrace! + # arbitrary gems may also be filtered via: + # config.filter_gems_from_backtrace("gem name") +end diff --git a/spec/spec_helper.rb b/spec/spec_helper.rb new file mode 100644 index 0000000..8f698be --- /dev/null +++ b/spec/spec_helper.rb @@ -0,0 +1,99 @@ +# This file was generated by the `rails generate rspec:install` command. Conventionally, all +# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`. +# The generated `.rspec` file contains `--require spec_helper` which will cause +# this file to always be loaded, without a need to explicitly require it in any +# files. +# +# Given that it is always loaded, you are encouraged to keep this file as +# light-weight as possible. Requiring heavyweight dependencies from this file +# will add to the boot time of your test suite on EVERY test run, even for an +# individual file that may not need all of that loaded. Instead, consider making +# a separate helper file that requires the additional dependencies and performs +# the additional setup, and require it from the spec files that actually need +# it. +# +# The `.rspec` file also contains a few flags that are not defaults but that +# users commonly want. +# +# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration +RSpec.configure do |config| + # rspec-expectations config goes here. You can use an alternate + # assertion/expectation library such as wrong or the stdlib/minitest + # assertions if you prefer. + config.expect_with :rspec do |expectations| + # This option will default to `true` in RSpec 4. It makes the `description` + # and `failure_message` of custom matchers include text for helper methods + # defined using `chain`, e.g.: + # be_bigger_than(2).and_smaller_than(4).description + # # => "be bigger than 2 and smaller than 4" + # ...rather than: + # # => "be bigger than 2" + expectations.include_chain_clauses_in_custom_matcher_descriptions = true + end + + # rspec-mocks config goes here. You can use an alternate test double + # library (such as bogus or mocha) by changing the `mock_with` option here. + config.mock_with :rspec do |mocks| + # Prevents you from mocking or stubbing a method that does not exist on + # a real object. This is generally recommended, and will default to + # `true` in RSpec 4. + mocks.verify_partial_doubles = true + end + + # This option will default to `:apply_to_host_groups` in RSpec 4 (and will + # have no way to turn it off -- the option exists only for backwards + # compatibility in RSpec 3). It causes shared context metadata to be + # inherited by the metadata hash of host groups and examples, rather than + # triggering implicit auto-inclusion in groups with matching metadata. + config.shared_context_metadata_behavior = :apply_to_host_groups + +# The settings below are suggested to provide a good initial experience +# with RSpec, but feel free to customize to your heart's content. +=begin + # This allows you to limit a spec run to individual examples or groups + # you care about by tagging them with `:focus` metadata. When nothing + # is tagged with `:focus`, all examples get run. RSpec also provides + # aliases for `it`, `describe`, and `context` that include `:focus` + # metadata: `fit`, `fdescribe` and `fcontext`, respectively. + config.filter_run_when_matching :focus + + # Allows RSpec to persist some state between runs in order to support + # the `--only-failures` and `--next-failure` CLI options. We recommend + # you configure your source control system to ignore this file. + config.example_status_persistence_file_path = "spec/examples.txt" + + # Limits the available syntax to the non-monkey patched syntax that is + # recommended. For more details, see: + # - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/ + # - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/ + # - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode + config.disable_monkey_patching! + + # Many RSpec users commonly either run the entire suite or an individual + # file, and it's useful to allow more verbose output when running an + # individual spec file. + if config.files_to_run.one? + # Use the documentation formatter for detailed output, + # unless a formatter has already been configured + # (e.g. via a command-line flag). + config.default_formatter = 'doc' + end + + # Print the 10 slowest examples and example groups at the + # end of the spec run, to help surface which specs are running + # particularly slow. + config.profile_examples = 10 + + # Run specs in random order to surface order dependencies. If you find an + # order dependency and want to debug it, you can fix the order by providing + # the seed, which is printed after each run. + # --seed 1234 + config.order = :random + + # Seed global randomization in this process using the `--seed` CLI option. + # Setting this allows you to use `--seed` to deterministically reproduce + # test failures related to randomization by passing the same `--seed` value + # as the one that triggered the failure. + Kernel.srand config.seed +=end +end diff --git a/spec/test_app/README.rdoc b/spec/test_app/README.rdoc new file mode 100644 index 0000000..55cebb3 --- /dev/null +++ b/spec/test_app/README.rdoc @@ -0,0 +1,3 @@ +== README + +This is a test app diff --git a/spec/test_app/Rakefile b/spec/test_app/Rakefile new file mode 100644 index 0000000..ba6b733 --- /dev/null +++ b/spec/test_app/Rakefile @@ -0,0 +1,6 @@ +# Add your own tasks in files placed in lib/tasks ending in .rake, +# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake. + +require File.expand_path('../config/application', __FILE__) + +Rails.application.load_tasks diff --git a/spec/test_app/app/assets/images/.keep b/spec/test_app/app/assets/images/.keep new file mode 100644 index 0000000..e69de29 diff --git a/spec/test_app/app/assets/javascripts/application.js b/spec/test_app/app/assets/javascripts/application.js new file mode 100644 index 0000000..8913b40 --- /dev/null +++ b/spec/test_app/app/assets/javascripts/application.js @@ -0,0 +1,13 @@ +// This is a manifest file that'll be compiled into application.js, which will include all the files +// listed below. +// +// Any JavaScript/Coffee file within this directory, lib/assets/javascripts, vendor/assets/javascripts, +// or any plugin's vendor/assets/javascripts directory can be referenced here using a relative path. +// +// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the +// compiled file. +// +// Read Sprockets README (https://github.com/rails/sprockets#sprockets-directives) for details +// about supported directives. +// +//= require_tree . diff --git a/spec/test_app/app/assets/stylesheets/application.css b/spec/test_app/app/assets/stylesheets/application.css new file mode 100644 index 0000000..f9cd5b3 --- /dev/null +++ b/spec/test_app/app/assets/stylesheets/application.css @@ -0,0 +1,15 @@ +/* + * This is a manifest file that'll be compiled into application.css, which will include all the files + * listed below. + * + * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets, + * or any plugin's vendor/assets/stylesheets directory can be referenced here using a relative path. + * + * You're free to add application-wide styles to this file and they'll appear at the bottom of the + * compiled file so the styles you add here take precedence over styles defined in any styles + * defined in the other CSS/SCSS files in this directory. It is generally better to create a new + * file per style scope. + * + *= require_tree . + *= require_self + */ diff --git a/spec/test_app/app/controllers/application_controller.rb b/spec/test_app/app/controllers/application_controller.rb new file mode 100644 index 0000000..1de4927 --- /dev/null +++ b/spec/test_app/app/controllers/application_controller.rb @@ -0,0 +1,9 @@ +class ApplicationController < ActionController::Base + # Prevent CSRF attacks by raising an exception. + # For APIs, you may want to use :null_session instead. + protect_from_forgery with: :exception + + def index + head 200 + end +end diff --git a/spec/test_app/app/controllers/choice b/spec/test_app/app/controllers/choice new file mode 120000 index 0000000..cbf97f4 --- /dev/null +++ b/spec/test_app/app/controllers/choice @@ -0,0 +1 @@ +../../../../app/controllers/choice \ No newline at end of file diff --git a/spec/test_app/app/controllers/concerns/.keep b/spec/test_app/app/controllers/concerns/.keep new file mode 100644 index 0000000..e69de29 diff --git a/spec/test_app/app/helpers/application_helper.rb b/spec/test_app/app/helpers/application_helper.rb new file mode 100644 index 0000000..de6be79 --- /dev/null +++ b/spec/test_app/app/helpers/application_helper.rb @@ -0,0 +1,2 @@ +module ApplicationHelper +end diff --git a/spec/test_app/app/mailers/.keep b/spec/test_app/app/mailers/.keep new file mode 100644 index 0000000..e69de29 diff --git a/spec/test_app/app/models/badge.rb b/spec/test_app/app/models/badge.rb new file mode 100644 index 0000000..dc8d49e --- /dev/null +++ b/spec/test_app/app/models/badge.rb @@ -0,0 +1,4 @@ + +class Badge + def self.find_by_name(name); end; +end diff --git a/spec/test_app/app/models/concerns/.keep b/spec/test_app/app/models/concerns/.keep new file mode 100644 index 0000000..e69de29 diff --git a/spec/test_app/app/models/user.rb b/spec/test_app/app/models/user.rb new file mode 100644 index 0000000..aa64b80 --- /dev/null +++ b/spec/test_app/app/models/user.rb @@ -0,0 +1,5 @@ + +class User + def self.find_by_email(email); end + def self.save; end +end diff --git a/spec/test_app/app/models/user_badge.rb b/spec/test_app/app/models/user_badge.rb new file mode 100644 index 0000000..194f61b --- /dev/null +++ b/spec/test_app/app/models/user_badge.rb @@ -0,0 +1,4 @@ + +class UserBadge + def self.find_by(opts); end; +end diff --git a/spec/test_app/app/models/user_custom_field.rb b/spec/test_app/app/models/user_custom_field.rb new file mode 100644 index 0000000..3012403 --- /dev/null +++ b/spec/test_app/app/models/user_custom_field.rb @@ -0,0 +1,4 @@ + +class UserCustomField + def self.create!(opts); end; +end diff --git a/spec/test_app/app/services/badge_granter.rb b/spec/test_app/app/services/badge_granter.rb new file mode 100644 index 0000000..c8ca240 --- /dev/null +++ b/spec/test_app/app/services/badge_granter.rb @@ -0,0 +1,4 @@ +class BadgeGranter + def self.grant(badge, user, opts={}); end; + def self.revoke(user_badge, opts={}); end; +end diff --git a/spec/test_app/app/views/layouts/application.html.erb b/spec/test_app/app/views/layouts/application.html.erb new file mode 100644 index 0000000..797902d --- /dev/null +++ b/spec/test_app/app/views/layouts/application.html.erb @@ -0,0 +1,14 @@ + + + + TestApp + <%= stylesheet_link_tag 'application', media: 'all', 'data-turbolinks-track' => true %> + <%= javascript_include_tag 'application', 'data-turbolinks-track' => true %> + <%= csrf_meta_tags %> + + + +<%= yield %> + + + diff --git a/spec/test_app/bin/bundle b/spec/test_app/bin/bundle new file mode 100755 index 0000000..66e9889 --- /dev/null +++ b/spec/test_app/bin/bundle @@ -0,0 +1,3 @@ +#!/usr/bin/env ruby +ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__) +load Gem.bin_path('bundler', 'bundle') diff --git a/spec/test_app/bin/rails b/spec/test_app/bin/rails new file mode 100755 index 0000000..5191e69 --- /dev/null +++ b/spec/test_app/bin/rails @@ -0,0 +1,4 @@ +#!/usr/bin/env ruby +APP_PATH = File.expand_path('../../config/application', __FILE__) +require_relative '../config/boot' +require 'rails/commands' diff --git a/spec/test_app/bin/rake b/spec/test_app/bin/rake new file mode 100755 index 0000000..1724048 --- /dev/null +++ b/spec/test_app/bin/rake @@ -0,0 +1,4 @@ +#!/usr/bin/env ruby +require_relative '../config/boot' +require 'rake' +Rake.application.run diff --git a/spec/test_app/bin/setup b/spec/test_app/bin/setup new file mode 100755 index 0000000..acdb2c1 --- /dev/null +++ b/spec/test_app/bin/setup @@ -0,0 +1,29 @@ +#!/usr/bin/env ruby +require 'pathname' + +# path to your application root. +APP_ROOT = Pathname.new File.expand_path('../../', __FILE__) + +Dir.chdir APP_ROOT do + # This script is a starting point to setup your application. + # Add necessary setup steps to this file: + + puts "== Installing dependencies ==" + system "gem install bundler --conservative" + system "bundle check || bundle install" + + # puts "\n== Copying sample files ==" + # unless File.exist?("config/database.yml") + # system "cp config/database.yml.sample config/database.yml" + # end + + puts "\n== Preparing database ==" + system "bin/rake db:setup" + + puts "\n== Removing old logs and tempfiles ==" + system "rm -f log/*" + system "rm -rf tmp/cache" + + puts "\n== Restarting application server ==" + system "touch tmp/restart.txt" +end diff --git a/spec/test_app/config.ru b/spec/test_app/config.ru new file mode 100644 index 0000000..bd83b25 --- /dev/null +++ b/spec/test_app/config.ru @@ -0,0 +1,4 @@ +# This file is used by Rack-based servers to start the application. + +require ::File.expand_path('../config/environment', __FILE__) +run Rails.application diff --git a/spec/test_app/config/application.rb b/spec/test_app/config/application.rb new file mode 100644 index 0000000..da6c42c --- /dev/null +++ b/spec/test_app/config/application.rb @@ -0,0 +1,30 @@ +require File.expand_path('../boot', __FILE__) + +# Pick the frameworks you want: +# require "active_record/railtie" +require "action_controller/railtie" +require "action_mailer/railtie" +require "action_view/railtie" +require "sprockets/railtie" + +Bundler.require(*Rails.groups) +require File.expand_path('../../../../lib/choice', __FILE__) + +module TestApp + class Application < Rails::Application + # Settings in config/environments/* take precedence over those specified here. + # Application configuration should go into files in config/initializers + # -- all .rb files in that directory are automatically loaded. + + # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone. + # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC. + # config.time_zone = 'Central Time (US & Canada)' + + # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded. + # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s] + # config.i18n.default_locale = :de + + # Do not swallow errors in after_commit/after_rollback callbacks. + # config.active_record.raise_in_transactional_callbacks = true + end +end diff --git a/spec/test_app/config/boot.rb b/spec/test_app/config/boot.rb new file mode 100644 index 0000000..6266cfc --- /dev/null +++ b/spec/test_app/config/boot.rb @@ -0,0 +1,5 @@ +# Set up gems listed in the Gemfile. +ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__) + +require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE']) +$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__) diff --git a/spec/test_app/config/database.yml b/spec/test_app/config/database.yml new file mode 100644 index 0000000..1c1a37c --- /dev/null +++ b/spec/test_app/config/database.yml @@ -0,0 +1,25 @@ +# SQLite version 3.x +# gem install sqlite3 +# +# Ensure the SQLite 3 gem is defined in your Gemfile +# gem 'sqlite3' +# +default: &default + adapter: sqlite3 + pool: 5 + timeout: 5000 + +development: + <<: *default + database: db/development.sqlite3 + +# Warning: The database defined as "test" will be erased and +# re-generated from your development database when you run "rake". +# Do not set this db to the same as development or production. +test: + <<: *default + database: db/test.sqlite3 + +production: + <<: *default + database: db/production.sqlite3 diff --git a/spec/test_app/config/engine.rb b/spec/test_app/config/engine.rb new file mode 100644 index 0000000..d5aa639 --- /dev/null +++ b/spec/test_app/config/engine.rb @@ -0,0 +1,6 @@ +module ::Choice + class Engine < ::Rails::Engine + engine_name 'choice' + isolate_namespace Choice + end +end diff --git a/spec/test_app/config/environment.rb b/spec/test_app/config/environment.rb new file mode 100644 index 0000000..ee8d90d --- /dev/null +++ b/spec/test_app/config/environment.rb @@ -0,0 +1,5 @@ +# Load the Rails application. +require File.expand_path('../application', __FILE__) + +# Initialize the Rails application. +Rails.application.initialize! diff --git a/spec/test_app/config/environments/development.rb b/spec/test_app/config/environments/development.rb new file mode 100644 index 0000000..12293d7 --- /dev/null +++ b/spec/test_app/config/environments/development.rb @@ -0,0 +1,41 @@ +Rails.application.configure do + # Settings specified here will take precedence over those in config/application.rb. + + # In the development environment your application's code is reloaded on + # every request. This slows down response time but is perfect for development + # since you don't have to restart the web server when you make code changes. + config.cache_classes = false + + # Do not eager load code on boot. + config.eager_load = false + + # Show full error reports and disable caching. + config.consider_all_requests_local = true + config.action_controller.perform_caching = false + + # Don't care if the mailer can't send. + config.action_mailer.raise_delivery_errors = false + + # Print deprecation notices to the Rails logger. + config.active_support.deprecation = :log + + # Raise an error on page load if there are pending migrations. + # config.active_record.migration_error = :page_load + + # Debug mode disables concatenation and preprocessing of assets. + # This option may cause significant delays in view rendering with a large + # number of complex assets. + config.assets.debug = true + + # Asset digests allow you to set far-future HTTP expiration dates on all assets, + # yet still be able to expire them through the digest params. + config.assets.digest = true + + # Adds additional error checking when serving assets at runtime. + # Checks for improperly declared sprockets dependencies. + # Raises helpful error messages. + config.assets.raise_runtime_errors = true + + # Raises error for missing translations + # config.action_view.raise_on_missing_translations = true +end diff --git a/spec/test_app/config/environments/production.rb b/spec/test_app/config/environments/production.rb new file mode 100644 index 0000000..5c1b32e --- /dev/null +++ b/spec/test_app/config/environments/production.rb @@ -0,0 +1,79 @@ +Rails.application.configure do + # Settings specified here will take precedence over those in config/application.rb. + + # Code is not reloaded between requests. + config.cache_classes = true + + # Eager load code on boot. This eager loads most of Rails and + # your application in memory, allowing both threaded web servers + # and those relying on copy on write to perform better. + # Rake tasks automatically ignore this option for performance. + config.eager_load = true + + # Full error reports are disabled and caching is turned on. + config.consider_all_requests_local = false + config.action_controller.perform_caching = true + + # Enable Rack::Cache to put a simple HTTP cache in front of your application + # Add `rack-cache` to your Gemfile before enabling this. + # For large-scale production use, consider using a caching reverse proxy like + # NGINX, varnish or squid. + # config.action_dispatch.rack_cache = true + + # Disable serving static files from the `/public` folder by default since + # Apache or NGINX already handles this. + config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present? + + # Compress JavaScripts and CSS. + config.assets.js_compressor = :uglifier + # config.assets.css_compressor = :sass + + # Do not fallback to assets pipeline if a precompiled asset is missed. + config.assets.compile = false + + # Asset digests allow you to set far-future HTTP expiration dates on all assets, + # yet still be able to expire them through the digest params. + config.assets.digest = true + + # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb + + # Specifies the header that your server uses for sending files. + # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache + # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX + + # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies. + # config.force_ssl = true + + # Use the lowest log level to ensure availability of diagnostic information + # when problems arise. + config.log_level = :debug + + # Prepend all log lines with the following tags. + # config.log_tags = [ :subdomain, :uuid ] + + # Use a different logger for distributed setups. + # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new) + + # Use a different cache store in production. + # config.cache_store = :mem_cache_store + + # Enable serving of images, stylesheets, and JavaScripts from an asset server. + # config.action_controller.asset_host = 'http://assets.example.com' + + # Ignore bad email addresses and do not raise email delivery errors. + # Set this to true and configure the email server for immediate delivery to raise delivery errors. + # config.action_mailer.raise_delivery_errors = false + + # Enable locale fallbacks for I18n (makes lookups for any locale fall back to + # the I18n.default_locale when a translation cannot be found). + config.i18n.fallbacks = true + + # Send deprecation notices to registered listeners. + config.active_support.deprecation = :notify + + # Use default logging formatter so that PID and timestamp are not suppressed. + config.log_formatter = ::Logger::Formatter.new + + # Do not dump schema after migrations. + config.active_record.dump_schema_after_migration = false +end diff --git a/spec/test_app/config/environments/test.rb b/spec/test_app/config/environments/test.rb new file mode 100644 index 0000000..1fbae61 --- /dev/null +++ b/spec/test_app/config/environments/test.rb @@ -0,0 +1,37 @@ +Rails.application.configure do + # Settings specified here will take precedence over those in config/application.rb. + + # The test environment is used exclusively to run your application's + # test suite. You never need to work with it otherwise. Remember that + # your test database is "scratch space" for the test suite and is wiped + # and recreated between test runs. Don't rely on the data there! + config.cache_classes = true + + # Do not eager load code on boot. This avoids loading your whole application + # just for the purpose of running a single test. If you are using a tool that + # preloads Rails for running tests, you may have to set it to true. + config.eager_load = false + + # Configure static file server for tests with Cache-Control for performance. + config.serve_static_files = true + config.static_cache_control = 'public, max-age=3600' + + # Show full error reports and disable caching. + config.consider_all_requests_local = true + config.action_controller.perform_caching = false + + # Raise exceptions instead of rendering exception templates. + config.action_dispatch.show_exceptions = false + + # Disable request forgery protection in test environment. + config.action_controller.allow_forgery_protection = false + + # Randomize the order test cases are executed. + config.active_support.test_order = :random + + # Print deprecation notices to the stderr. + config.active_support.deprecation = :stderr + + # Raises error for missing translations + # config.action_view.raise_on_missing_translations = true +end diff --git a/spec/test_app/config/initializers/assets.rb b/spec/test_app/config/initializers/assets.rb new file mode 100644 index 0000000..01ef3e6 --- /dev/null +++ b/spec/test_app/config/initializers/assets.rb @@ -0,0 +1,11 @@ +# Be sure to restart your server when you modify this file. + +# Version of your assets, change this if you want to expire all your assets. +Rails.application.config.assets.version = '1.0' + +# Add additional assets to the asset load path +# Rails.application.config.assets.paths << Emoji.images_path + +# Precompile additional assets. +# application.js, application.css, and all non-JS/CSS in app/assets folder are already added. +# Rails.application.config.assets.precompile += %w( search.js ) diff --git a/spec/test_app/config/initializers/backtrace_silencers.rb b/spec/test_app/config/initializers/backtrace_silencers.rb new file mode 100644 index 0000000..59385cd --- /dev/null +++ b/spec/test_app/config/initializers/backtrace_silencers.rb @@ -0,0 +1,7 @@ +# Be sure to restart your server when you modify this file. + +# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces. +# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ } + +# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code. +# Rails.backtrace_cleaner.remove_silencers! diff --git a/spec/test_app/config/initializers/cookies_serializer.rb b/spec/test_app/config/initializers/cookies_serializer.rb new file mode 100644 index 0000000..7f70458 --- /dev/null +++ b/spec/test_app/config/initializers/cookies_serializer.rb @@ -0,0 +1,3 @@ +# Be sure to restart your server when you modify this file. + +Rails.application.config.action_dispatch.cookies_serializer = :json diff --git a/spec/test_app/config/initializers/filter_parameter_logging.rb b/spec/test_app/config/initializers/filter_parameter_logging.rb new file mode 100644 index 0000000..4a994e1 --- /dev/null +++ b/spec/test_app/config/initializers/filter_parameter_logging.rb @@ -0,0 +1,4 @@ +# Be sure to restart your server when you modify this file. + +# Configure sensitive parameters which will be filtered from the log file. +Rails.application.config.filter_parameters += [:password] diff --git a/spec/test_app/config/initializers/inflections.rb b/spec/test_app/config/initializers/inflections.rb new file mode 100644 index 0000000..ac033bf --- /dev/null +++ b/spec/test_app/config/initializers/inflections.rb @@ -0,0 +1,16 @@ +# Be sure to restart your server when you modify this file. + +# Add new inflection rules using the following format. Inflections +# are locale specific, and you may define rules for as many different +# locales as you wish. All of these examples are active by default: +# ActiveSupport::Inflector.inflections(:en) do |inflect| +# inflect.plural /^(ox)$/i, '\1en' +# inflect.singular /^(ox)en/i, '\1' +# inflect.irregular 'person', 'people' +# inflect.uncountable %w( fish sheep ) +# end + +# These inflection rules are supported but not enabled by default: +# ActiveSupport::Inflector.inflections(:en) do |inflect| +# inflect.acronym 'RESTful' +# end diff --git a/spec/test_app/config/initializers/mime_types.rb b/spec/test_app/config/initializers/mime_types.rb new file mode 100644 index 0000000..dc18996 --- /dev/null +++ b/spec/test_app/config/initializers/mime_types.rb @@ -0,0 +1,4 @@ +# Be sure to restart your server when you modify this file. + +# Add new mime types for use in respond_to blocks: +# Mime::Type.register "text/richtext", :rtf diff --git a/spec/test_app/config/initializers/session_store.rb b/spec/test_app/config/initializers/session_store.rb new file mode 100644 index 0000000..438994f --- /dev/null +++ b/spec/test_app/config/initializers/session_store.rb @@ -0,0 +1,3 @@ +# Be sure to restart your server when you modify this file. + +Rails.application.config.session_store :cookie_store, key: '_test_app_session' diff --git a/spec/test_app/config/initializers/wrap_parameters.rb b/spec/test_app/config/initializers/wrap_parameters.rb new file mode 100644 index 0000000..33725e9 --- /dev/null +++ b/spec/test_app/config/initializers/wrap_parameters.rb @@ -0,0 +1,14 @@ +# Be sure to restart your server when you modify this file. + +# This file contains settings for ActionController::ParamsWrapper which +# is enabled by default. + +# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array. +ActiveSupport.on_load(:action_controller) do + wrap_parameters format: [:json] if respond_to?(:wrap_parameters) +end + +# To enable root element in JSON for ActiveRecord objects. +# ActiveSupport.on_load(:active_record) do +# self.include_root_in_json = true +# end diff --git a/spec/test_app/config/locales/en.yml b/spec/test_app/config/locales/en.yml new file mode 100644 index 0000000..0653957 --- /dev/null +++ b/spec/test_app/config/locales/en.yml @@ -0,0 +1,23 @@ +# Files in the config/locales directory are used for internationalization +# and are automatically loaded by Rails. If you want to use locales other +# than English, add the necessary files in this directory. +# +# To use the locales, use `I18n.t`: +# +# I18n.t 'hello' +# +# In views, this is aliased to just `t`: +# +# <%= t('hello') %> +# +# To use a different locale, set it with `I18n.locale`: +# +# I18n.locale = :es +# +# This would use the information in config/locales/es.yml. +# +# To learn more, please read the Rails Internationalization guide +# available at http://guides.rubyonrails.org/i18n.html. + +en: + hello: "Hello world" diff --git a/spec/test_app/config/routes.rb b/spec/test_app/config/routes.rb new file mode 100644 index 0000000..bc8a628 --- /dev/null +++ b/spec/test_app/config/routes.rb @@ -0,0 +1,5 @@ + +TestApp::Application.routes.draw do + get '/' => 'application#index' + mount ::Choice::Engine, at: '/choice' +end diff --git a/spec/test_app/config/secrets.yml b/spec/test_app/config/secrets.yml new file mode 100644 index 0000000..1e5c0a4 --- /dev/null +++ b/spec/test_app/config/secrets.yml @@ -0,0 +1,22 @@ +# Be sure to restart your server when you modify this file. + +# Your secret key is used for verifying the integrity of signed cookies. +# If you change this key, all old signed cookies will become invalid! + +# Make sure the secret is at least 30 characters and all random, +# no regular words or you'll be exposed to dictionary attacks. +# You can use `rake secret` to generate a secure secret key. + +# Make sure the secrets in this file are kept private +# if you're sharing your code publicly. + +development: + secret_key_base: 405c8d371d3c81bb1af4e3e7f951a5ff3002b51b2c5822e3317edf2ec462cbcdc8a684ee3610b6eed8fe66a7e88e2147dd4ccd7a6980c1244939dea45fc2a028 + +test: + secret_key_base: 4bde19f31a09df45996eea02eaec2a3a09dc994e43c0b6d17831c17e5aef013c8b7c3e3da8120874273386817e23117c5596e8f7e8d238a13df2f670d1c20cbe + +# Do not keep production secrets in the repository, +# instead read values from the environment. +production: + secret_key_base: <%= ENV["SECRET_KEY_BASE"] %> diff --git a/spec/test_app/db/development.sqlite3 b/spec/test_app/db/development.sqlite3 new file mode 100644 index 0000000..e69de29 diff --git a/spec/test_app/db/test.sqlite3 b/spec/test_app/db/test.sqlite3 new file mode 100644 index 0000000..e69de29 diff --git a/spec/test_app/lib/assets/.keep b/spec/test_app/lib/assets/.keep new file mode 100644 index 0000000..e69de29 diff --git a/spec/test_app/public/404.html b/spec/test_app/public/404.html new file mode 100644 index 0000000..b612547 --- /dev/null +++ b/spec/test_app/public/404.html @@ -0,0 +1,67 @@ + + + + The page you were looking for doesn't exist (404) + + + + + + +
+
+

The page you were looking for doesn't exist.

+

You may have mistyped the address or the page may have moved.

+
+

If you are the application owner check the logs for more information.

+
+ + diff --git a/spec/test_app/public/422.html b/spec/test_app/public/422.html new file mode 100644 index 0000000..a21f82b --- /dev/null +++ b/spec/test_app/public/422.html @@ -0,0 +1,67 @@ + + + + The change you wanted was rejected (422) + + + + + + +
+
+

The change you wanted was rejected.

+

Maybe you tried to change something you didn't have access to.

+
+

If you are the application owner check the logs for more information.

+
+ + diff --git a/spec/test_app/public/500.html b/spec/test_app/public/500.html new file mode 100644 index 0000000..061abc5 --- /dev/null +++ b/spec/test_app/public/500.html @@ -0,0 +1,66 @@ + + + + We're sorry, but something went wrong (500) + + + + + + +
+
+

We're sorry, but something went wrong.

+
+

If you are the application owner check the logs for more information.

+
+ + diff --git a/spec/test_app/public/favicon.ico b/spec/test_app/public/favicon.ico new file mode 100644 index 0000000..e69de29