* Limit the size of individual requests and also add a circuit breaker for the total memory used by in-flight request objects {GIT}16011[#16011]. (STATUS: DONE, v5.0.0)
=== The _version field may not uniquely identify document content during a network partition (STATUS: ONGOING)
When a primary has been partitioned away from the cluster there is a short period of time until it detects this. During that time it will continue
indexing writes locally, thereby updating document versions. When it tries to replicate the operation, however, it will discover that it is
partitioned away. It won't acknowledge the write and will wait until the partition is resolved to negotiate with the master on how to proceed.
The master will decide to either fail any replicas which failed to index the operations on the primary or tell the primary that it has to
step down because a new primary has been chosen in the meantime. Since the old primary has already written documents, clients may already have read from
the old primary before it shuts itself down. The version numbers of these reads may not be unique if the new primary has already accepted
writes for the same document (see {GIT}19269[#19269]).
We are currently implementing Sequence numbers {GIT}10708[#10708] which better track primary changes. Sequence numbers thus provide a basis
for uniquely identifying writes even in the presence of network partitions and will replace `_version` in operations that require this.
If a network partition separates a node from the master, there is some window of time before the node detects it. The length of the window is dependent on the type of the partition. This window is extremely small if a socket is broken. More adversarial partitions, for example, silently dropping requests without breaking the socket can take longer (up to 3x30s using current defaults).
If the node hosts a primary shard at the moment of partition, and ends up being isolated from the cluster (which could have resulted in {GIT}2488[split-brain] before), some documents that are being indexed into the primary may be lost if they fail to reach one of the allocated replicas (due to the partition) and that replica is later promoted to primary by the master ({GIT}7572[#7572]).
To prevent this situation, the primary needs to wait for the master to acknowledge replica shard failures before acknowledging the write to the client. {GIT}14252[#14252]
A master node in Elasticsearch continuously https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-discovery-zen.html#fault-detection[monitors the cluster nodes]
and removes any node from the cluster that doesn't respond to its pings in a timely
fashion. If the master is left with fewer nodes than the `discovery.zen.minimum_master_nodes`
settings, it will step down and a new master election will start.
When a network partition causes a master node to lose many followers, there is a short window
in time until the node loss is detected and the master steps down. During that window, the
master may erroneously accept and acknowledge cluster state changes. To avoid this, we introduce
a new phase to cluster state publishing where the proposed cluster state is sent to all nodes
but is not yet committed. Only once enough nodes (`discovery.zen.minimum_master_nodes`) actively acknowledge
the change, it is committed and commit messages are sent to the nodes. See {GIT}13062[#13062].
=== Wait on incoming joins before electing local node as master (STATUS: DONE, v2.0.0)
During master election each node pings in order to discover other nodes and validate the liveness of existing
nodes. Based on this information the node either discovers an existing master or, if enough nodes are found
(see https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-discovery-zen.html#master-election[`discovery.zen.minimum_master_nodes`]) a new master will be elected. Currently, the node that is
elected as master will update the cluster state to indicate the result of the election. Other nodes will submit
a join request to the newly elected master node. Instead of immediately processing the election result, the elected master
node should wait for the incoming joins from other nodes, thus validating that the result of the election is properly applied. As soon as enough
nodes have sent their joins request (based on the `minimum_master_nodes` settings) the cluster state is updated.
{JIRA}5895[LUCENE-5895] adds a unique ID for each segment and each commit point. File-based replication (as performed by snapshot/restore) can use this ID to know whether the segment/commit on the source and destination machines are the same. Fixed in Lucene 5.0.
* {JIRA}5894[LUCENE-5894] lays the groundwork for extending more efficient checksum validation to all files during optimized bulk merges. (STATUS: DONE, Fixed in v2.0.0)
Make write calls return the number of total/successful/missing shards in the same way that we do in search, which ensures transparency in the consistency of write operations. {GIT}7994[#7994]. (STATUS: DONE, v2.0.0)
* Introduce shard level locks to prevent concurrent shard modifications {GIT}8436[#8436]. (STATUS: DONE, Fixed in v1.5.0)
* Delete shard contents under a lock {GIT}9083[#9083]. (STATUS: DONE, Fixed in v1.5.0)
* Delete shard under a lock {GIT}8579[#8579]. (STATUS: DONE, Fixed in v1.5.0)
* Refactor RecoveryTarget state management {GIT}8092[#8092]. (STATUS: DONE, Fixed in v1.5.0)
* Cancelling a recovery may leave temporary files behind {GIT}7893[#7893]. (STATUS: DONE, Fixed in v1.5.0)
* Quick cluster state processing can result in both shard copies being deleted {GIT}9503[#9503]. (STATUS: DONE, Fixed in v1.5.0)
* Rapid creation and deletion of an index can cause reuse of old index metadata {GIT}9489[#9489]. (STATUS: DONE, Fixed in v1.5.0)
* Flush immediately after the last concurrent recovery finishes to clear out the translog before a new recovery starts {GIT}9439[#9439]. (STATUS: DONE, Fixed in v1.5.0)
Certain versions of the JVM are known to have bugs which can cause index corruption. {GIT}7580[#7580] prevents Elasticsearch startup if known bad versions are in use.
When a node is experience network issues, the master detects it and removes the node from the cluster. That causes all ongoing recoveries from and to that node to be stopped and a new location is found for the relevant shards. However, in the of case partial network partition, where there are connectivity issues between the source and target nodes of a recovery but not between those nodes and the current master things may go wrong. While the nodes successfully restore the connection, the on going recoveries may have encountered issues. In {GIT}8720[#8720], we added test simulations for these and solved several issues that were flagged by them.
=== Improving Zen Discovery (STATUS: DONE, v1.4.0.Beta1)
Recovery from failure is a complicated process, especially in an asynchronous distributed system like Elasticsearch. With several processes happening in parallel, it is important to ensure that recovery proceeds swiftly and safely. While fixing the {GIT}2488[split-brain issue] we have been hunting down corner cases that were not handled optimally, adding tests to demonstrate the issues, and working on fixes:
* Faster & better detection of master & node failures, including not trying to reconnect upon disconnect, fail on disconnect error on ping, verify cluster names in pings. Previously, Elasticsearch had to wait a bit for the node to complete the process required to join the cluster. Recent changes guarantee that a node has fully joined the cluster before we start the fault detection process. Therefore we can do an immediate check causing faster detection of errors and validation of cluster state after a minimum master node breach. {GIT}6706[#6706], {GIT}7399[#7399] (STATUS: DONE, v1.4.0.Beta1)
* Broaden Unicast pinging when master fails: When a node loses it’s current master it will start pinging to find a new one. Previously, when using unicast based pinging, the node would ping a set of predefined nodes asking them whether the master had really disappeared or whether there was a network hiccup. Now, we ping all nodes in the cluster to increase coverage. In the case that all unicast hosts are disconnected from the current master during a network failure, this improvement is essential to allow the cluster to reform once the partition is healed. {GIT}7336[#7336] (STATUS: DONE, v1.4.0.Beta1)
* After joining a cluster, validate that the join was successful and that the master has been set in the local cluster state. {GIT}6969[#6969]. (STATUS: DONE, v1.4.0.Beta1)
* Write additional tests that use the test infrastructure to verify proper behavior during network disconnections and garbage collections. {GIT}7082[#7082] (STATUS: DONE, v1.4.0.Beta1)
When Lucene opens a segment for reading, it validates the checksum on the smaller segment files -- those which it reads entirely into memory -- but not the large files like term frequencies and positions, as this would be very expensive. During merges, term vectors and stored fields are validated, as long the segments being merged come from the same version of Lucene. Checksumming for term vectors and stored fields is important because merging consists of performing optimized byte copies. Term frequencies, term positions, payloads, doc values, and norms are currently not checked during merges, although Lucene provides the option to do so. These files are less prone to silent corruption as they are actively decoded during merge, and so are more likely to throw exceptions if there is any corruption.
The following changes have been made:
* {GIT}7360[#7360] validates checksums on all segment files during merges. (STATUS: DONE, fixed in v1.4.0.Beta1)
* {JIRA}5842[LUCENE-5842] validates the structure of the checksum footer of the postings lists, doc values, stored fields and term vectors when opening a new segment, to ensure that these files have not been truncated. (STATUS: DONE, Fixed in Lucene 4.10 and v1.4.0.Beta1)
* {GIT}8407[#8407] validates Lucene checksums for legacy files. (STATUS: DONE; Fixed in v1.3.6)
Lucene 4 added a number of alternative codecs for experimentation purposes, and Elasticsearch exposed the ability to change codecs. Since then, Lucene has settled on the best choice of codec and provides backwards compatibility only for the default codec. {GIT}7566[#7566] removes the ability to set alternate codecs.
A hash collision makes it possible for two different files to have the same length and the same checksum. Instead, a segment's identity should rely on checksums from all of the files in a single segment, which greatly reduces the chance of a collision. This change has been merged ({GIT}7351[#7351]).
Even when minimum master nodes is set, split brain can still occur under certain conditions, e.g. disconnection between master eligible nodes, which can lead to data loss. The scenario is described in detail in {GIT}2488[issue 2488]:
* Introduce a new testing infrastructure to simulate different types of node disconnections, including loss of network connection, lost messages, message delays, etc. See {GIT}5631[MockTransportService] support and {GIT}6505[service disruption] for more details. (STATUS: DONE, v1.4.0.Beta1).
* Added tests that simulated the bug described in issue 2488. You can take a look at the https://github.com/elastic/elasticsearch/commit/7bf3ffe73c44f1208d1f7a78b0629eb48836e726[original commit] of a reproduction on master. (STATUS: DONE, v1.2.0)
* The bug described in {GIT}2488[issue 2488] is caused by an issue in our zen discovery gossip protocol. This specific issue has been fixed, and work has been done to make the algorithm more resilient. (STATUS: DONE, v1.4.0.Beta1)
Each translog entry in Elasticsearch should have its own checksum, and potentially additional information, so that we can properly detect corrupted translog entries and act accordingly. You can find more detail in issue {GIT}6554[#6554].
To start, we will begin by adding checksums to the translog to detect corrupt entries. Once this work has been completed, we will add translog entry markers so that corrupt entries can be skipped in the translog if/when desired.
We are in the process of introducing multiple circuit breakers in Elasticsearch, which can “borrow” space from each other in the event that one runs out of memory. This architecture will allow limits for certain parts of memory, but still allow flexibility in the event that another reserve like field data is not being used. This change includes adding a breaker for the BigArrays internal object used for some aggregations. See issue {GIT}6739[#6739] for more details.
Fielddata is one of the largest consumers of heap memory, and thus one of the primary reasons for running out of memory and causing node instability. Elasticsearch has had the “doc values” option for a while, which allows you to build these structures at index time so that they live on disk instead of in memory. Up until recently, doc values were significantly slower than in-memory fielddata.
By benchmarking and profiling both Lucene and Elasticsearch, we identified the bottlenecks and have made a series of improvements to improve the performance of doc values. They are now almost as fast as the in-memory option.
Upgrading indices create with Lucene 3.x (Elasticsearch v0.20 and before) to Lucene 4.7 - 4.9 (Elasticsearch v1.1.0 to v1.3.x), could result in index corruption. {JIRA}5907[LUCENE-5907] fixes this issue in Lucene 4.10.
Lucene uses reference counting to prevent files that are still in use from being deleted. Lucene testing discovered a bug ({JIRA}5919[LUCENE-5919]) when decrementing the ref count on a batch of files. If deleting some of the files resulted in an exception (e.g. due to interference from a virus scanner), the files that had their ref counts decremented successfully could later have their ref counts deleted again, incorrectly, resulting in files being physically deleted before their time. This is fixed in Lucene 4.10.
=== Using Lucene Checksums to verify shards during snapshot/restore (STATUS:DONE, v1.3.3)
The snapshot process should verify checksums for each file that is being snapshotted to make sure that created snapshot doesn’t contain corrupted files. If a corrupted file is detected, the snapshot should fail with an error. In order to implement this feature we need to have correct and verifiable checksums stored with segment files, which is only possible for files that were written by the officially supported append-only codecs. See {GIT}7159[#7159].
[float]
=== Rare compression corruption during shard recovery (STATUS: DONE, v1.3.2)
During recovery, the primary shard is copied over the network to become a new replica shard. In rare cases, it was possible for a hash collision to trigger a bug in the compression library that is used to produce corruption in the replica shard. This bug was exposed by the change to validate checksums during recovery. We tracked down the bug in the in compression library and submitted a patch, which was accepted and merged by the upstream project. See {GIT}7210[#7210].
[float]
=== Safer recovery of replica shards (STATUS: DONE, v1.3.0)
If a primary shard fails or is closed while a replica is using it for recovery, we need to ensure that the replica is properly failed as well, and allow recovery to start from the new primary. Also check that an active copy of a shard is available on another node before physically removing an inactive shard from disk. {GIT}6825[#6825], {GIT}6645[#6645], {GIT}6995[#6995].
[float]
=== Using Lucene Checksums to verify shards during recovery (STATUS: DONE, v1.3.0)
Elasticsearch can use Lucene checksums to validate files while {GIT}6776[recovering a replica shard from a primary].
This issue exposed a bug in Elasticsearch’s handling of primary shard failure when having more than 2 replicas, causing the second replica to not be properly unassigned if it is in the middle of recovery. It was fixed with the merge of issue {GIT}6808[#6808].
In order to verify the checksumming mechanism, we added functionality to our testing infrastructure that can corrupt an arbitrary index file and at any point, such as while it’s traveling over the wire or residing on disk. The tests utilizing this feature expect full or partial recovery from the failure while neither losing data nor spreading the corruption.
[float]
=== Detect File Corruption (STATUS: DONE, v1.3.0)
When a corrupted index can be detected during merging or refresh, Elasticsearch will fail the shard if a checksum failure is detected. You can read the full details in pull request {GIT}6776[#6776].
[float]
=== Network disconnect events could be lost, causing a zombie node to stay in the cluster state (STATUS: DONE, v1.3.0)
Previously, there was a very short window in which we could lose a node disconnect event. To prevent this from occurring, we added extra handling of connection errors to our nodes & master fault detection pinging to make sure the node disconnect event is detected. See issue {GIT}6686[#6686].
[float]
=== Other fixes to Lucene to address resiliency (STATUS: DONE, v1.3.0)
* NativeLock is released if Lock is closed after failing on obtain {JIRA}5738[LUCENE-5738].
* NRT Reader close can wipe an index it doesn’t own. {JIRA}5574[LUCENE-5574]
* FSDirectory’s fsync() is lenient, now throws exceptions when errors occur {JIRA}5570[LUCENE-5570]
* fsync() directory when committing {JIRA}5588[LUCENE-5588]
Since founding Elasticsearch Inc, we grew our test base from ~1k tests to about 4k in just about over a year. We invested massively into our testing infrastructure, running our tests continuously on different operating systems, bare metal hardware and cloud environments, all while randomizing JVMs and their settings.
Yet, backwards compatibility testing was a very manual thing until we released a pretty {GIT}6393[insane bug] with Elasticsearch 1.2. We tried to fix places where the absolute value of a number was negative (a documented behavior of Math.abs(int) in Java) and missed that the fix for this also changed the result of our routing function. No matter how much randomization we applied to the tests, we didn’t catch this particular failure. We always had backwards compatibility tests on our list of things to do, but didn’t have them in place back then.
We recently tweaked our testing infrastructure to be able to run tests against a hybrid cluster composed of a released version of Elasticsearch and our current stable branch. This test pattern allowed us to mimic typical upgrade scenarios like rolling upgrades, index backwards compatibility and recovering from old to new nodes.
Now, even the simplest test that relies on routing fails against 1.2.0, which is exactly we were aiming for. The test would not have caught the aforementioned {GIT}6393[routing bug] before releasing 1.2.0, but it immediately saved us from {GIT}6660[another problem] in the stable branch.
The work on our testing infrastructure is more than just issue prevention, it allows us to develop and test upgrade paths, introduce new features and evolve indexing over time. It isn’t enough to introduce more resilient implementations, we also have to ensure that users take advantage of them when they upgrade.
You can read more about backwards compatibility tests in issue {GIT}6497[#6497].
[float]
=== Full Translog Writes on all Platforms (STATUS: DONE, v1.2.2 and v1.3.0)
We have recently received bug reports of transaction log corruption that can occur when indexing very large documents (in the area of 300 KB). Although some Linux users reported this behavior, it appears the problem occurs more frequently when running Windows. We traced the source of the problem to the fact that when serializing documents to the transaction log, the Operating System can actually write only part of the document before returning from the write call. We can now detect this situation and make sure that the entire document is properly written. You can read the full details in pull request {GIT}6576[#6576].
[float]
=== Lucene Checksums (STATUS: DONE, v1.2.0)
Before Apache Lucene version 4.8, checksums were not computed on generated index files. The result was that it was difficult to identify when or if a Lucene index got corrupted, whether by hardware failure, JVM bug or for an entirely different reason.
For an idea of the checksum efforts in progress in Apache Lucene, see issues {JIRA}2446[LUCENE-2446], {JIRA}5580[LUCENE-5580] and {JIRA}5602[LUCENE-5602]. The gist is that Lucene 4.8+ now computes full checksums on all index files and it verifies them when opening metadata or other smaller files as well as other files during merges.
[float]
=== Detect errors faster by locally failing a shard upon an indexing error (STATUS: DONE, v1.2.0)
Previously, Elasticsearch notified the master of the shard failure and waited for the master to close the local copy of the shard, thus assigning it to other nodes. This architecture caused delays in failure detection, potentially causing unneeded failures of other incoming requests. In rare cases, such as concurrency racing conditions or certain network partitions configurations, we could lose these failure notifications. We solved this issue by locally failing shards upon indexing errors. See issue {GIT}5847[#5847].
[float]
=== Snapshot/Restore API (STATUS: DONE, v1.0.0)
In Elasticsearch version 1.0, we significantly improved the backup process by introducing the Snapshot/Restore API. While it was always possible to make backups of Elasticsearch, the Snapshot/Restore API made the backup process much easier.
The backup process is incremental, making it very efficient since only files changed since the last backup are copied. Even with this efficiency introduced, each snapshot contains a full picture of the cluster at the moment when backup started. The restore API allows speedy recovery of a full cluster as well as selected indices.
Since that first release in version 1.0, the API has continued to evolve. In version 1.1.0, we added a new snapshot status API that allows users to monitor the snapshot process. In 1.3.0 we added the ability to {GIT}6457[restore indices without their aliases] and in 1.4 we are planning to add the ability to {GIT}6368[restore partial snapshots].
The Snapshot/Restore API supports a number of different repository types for storing backups. Currently, it’s possible to make backups to a shared file system, Amazon S3, HDFS, and Azure storage. We are continuing to work on adding other types of storage systems, as well as improving the robustness of the snapshot/restore process.
Currently, the circuit breaker protects against loading too much field data by estimating how much memory the field data will take to load, then aborting the request if the memory requirements are too high. This feature was added in Elasticsearch version 1.0.0.
=== Use of Paginated Data Structures to Ease Garbage Collection (STATUS: DONE, v1.0.0 & v1.2.0)
Elasticsearch has moved from an object-based cache to a page-based cache recycler as described in issue {GIT}4557[#4557]. This change makes garbage collection easier by limiting fragmentation, since all pages have the same size and are recycled. It also allows managing the size of the cache not based on the number of objects it contains, but on the memory that it uses.
These pages are used for two main purposes: implementing higher level data structures such as hash tables that are used internally by aggregations to e.g. map terms to counts, as well as reusing memory in the translog/transport layer as detailed in issue {GIT}5691[#5691].
In order to run a more resilient cluster, we recommend running dedicated master nodes to ensure master nodes are not affected by resources consumed by data nodes. We also have made master nodes more resilient to heavy resource usage, mainly associated with large clusters / cluster states.
These changes include:
* Improve the balancing algorithm to execute faster across large clusters / many indices. (See issue {GIT}4458[#4458] and {GIT}4459[#4459])
* Improve cluster state publishing to not create an additional network buffer per node. (More in https://github.com/elastic/elasticsearch/commit/a9e259d438c3cb1d3bef757db2d2a91cf85be609[this commit].)
* Improve master handling of large scale mapping updates from data nodes by batching them into a single cluster event. (See issue {GIT}4373[#4373].)
* Add an ack mechanism where next phase cluster updates are processed only when nodes acknowledged they received the previous cluster state. (See issues {GIT}3736[#3736], {GIT}3786[#3786], {GIT}4114[#4114], {GIT}4169[#4169], {GIT}4228[#4228] and {GIT}4421[#4421], which also include enhancements to the ack mechanism implementation.)
[float]
=== Multi Data Paths May Falsely Report Corrupt Index (STATUS: DONE, v1.0.0)
When using multiple data paths, an index could be falsely reported as corrupted. This has been fixed with pull request {GIT}4674[#4674].
[float]
=== Randomized Testing (STATUS: DONE, v1.0.0)
In order to best validate for resiliency in Elasticsearch, we rewrote the Elasticsearch test infrastructure to introduce the concept of http://berlinbuzzwords.de/sites/berlinbuzzwords.de/files/media/documents/dawidweiss-randomizedtesting-pub.pdf[randomized testing]. Randomized testing allows us to easily enhance the Elasticsearch testing infrastructure with predictably irrational conditions, making the resulting code base more resilient.
Each of our integration tests runs against a cluster with a random number of nodes, and indices have a random number of shards and replicas. Merge settings change for every run, indexing is done in serial or async fashion or even wrapped in a bulk operation and thread pool sizes vary to ensure that we don’t produce a deadlock no matter what happens. The list of places we use this randomization infrastructure is long, and growing every day, and has saved us headaches several times before we shipped a particular feature.
At Elasticsearch, we live the philosophy that we can miss a bug once, but never a second time. We make our tests more evil as you go, introducing randomness in all the areas where we discovered bugs. We figure if our tests don’t fail, we are not trying hard enough! If you are interested in how we have evolved our test infrastructure over time check out https://github.com/elastic/elasticsearch/issues?q=label%3Atest[issues labeled with ``test'' on GitHub].
=== Lucene Loses Data On File Descriptors Failure (STATUS: DONE, v0.90.0)
When a process runs out of file descriptors, Lucene can causes an index to be completely deleted. This issue was fixed in Lucene ({JIRA}4870[version 4.2.1]) and fixed in an early version of Elasticsearch. See issue {GIT}2812[#2812].
