Load tests showed that SerialMS has problems to keep up with
the merges under high load. We should switch back to CMS
until we have a better story to balance merge
threads / efforts across shards on a single node.
Closes#5817
Add an API endpoint at /_bench for submitting, listing, and aborting
search benchmarks. This API can be used for timing search requests,
subject to various user-defined settings.
Benchmark results provide summary and detailed statistics on such
values as min, max, and mean time. Values are reported per-node so that
it is easy to spot outliers. Slow requests are also reported.
Long running benchmarks can be viewed with a GET request, or aborted
with a POST request.
Benchmark results are optionally stored in an index for subsequent
analysis.
Closes#5407
The default precision was way too exact and could lead people to
think that geo context suggestions are not working. This patch now
requires you to set the precision in the mapping, as elasticsearch itself
can never tell exactly, what the required precision for the users
suggestions are.
Closes#5621
The `field_value_factor` function uses the value of a field in the
document to influence the score.
A query that looks like:
{
"query": {
"function_score": {
"query": {"match": { "body": "foo" }},
"functions": [
{
"field_value_factor": {
"field": "popularity",
"factor": 1.1,
"modifier": "square"
}
}
],
"score_mode": "max",
"boost_mode": "sum"
}
}
}
Would have the score modified by:
square(1.1 * doc['popularity'].value)
Closes#5519
allow to configure on the index level which blocks can optionally be applied using tribe.blocks.indices prefix settings.
allow to control what will be done when a conflict is detected on index names coming from several clusters using the tribe.on_conflict setting. Defaults remains "any", but now support also "drop" and "prefer_[tribeName]".
closes#5501
Adds a new API endpoint at /_recovery as well as to the Java API. The
recovery API allows one to see the recovery status of all shards in the
cluster. It will report on percent complete, recovery type, and which
files are copied.
Closes#4637
By default the date_/histogram returns all the buckets within the range of the data itself, that is, the documents with the smallest values (on which with histogram) will determine the min bucket (the bucket with the smallest key) and the documents with the highest values will determine the max bucket (the bucket with the highest key). Often, when when requesting empty buckets (min_doc_count : 0), this causes a confusion, specifically, when the data is also filtered.
To understand why, let's look at an example:
Lets say the you're filtering your request to get all docs from the last month, and in the date_histogram aggs you'd like to slice the data per day. You also specify min_doc_count:0 so that you'd still get empty buckets for those days to which no document belongs. By default, if the first document that fall in this last month also happen to fall on the first day of the **second week** of the month, the date_histogram will **not** return empty buckets for all those days prior to that second week. The reason for that is that by default the histogram aggregations only start building buckets when they encounter documents (hence, missing on all the days of the first week in our example).
With extended_bounds, you now can "force" the histogram aggregations to start building buckets on a specific min values and also keep on building buckets up to a max value (even if there are no documents anymore). Using extended_bounds only makes sense when min_doc_count is 0 (the empty buckets will never be returned if the min_doc_count is greater than 0).
Note that (as the name suggest) extended_bounds is **not** filtering buckets. Meaning, if the min bounds is higher than the values extracted from the documents, the documents will still dictate what the min bucket will be (and the same goes to the extended_bounds.max and the max bucket). For filtering buckets, one should nest the histogram agg under a range filter agg with the appropriate min/max.
Closes#5224
Today, we use ConcurrentMergeScheduler, and this can be painful since it is concurrent on a shard level, with a max of 3 threads doing concurrent merges. If there are several shards being indexed, then there will be a minor explosion of threads trying to do merges, all being throttled by our merge throttling.
Moving to serial merge scheduler will still maintain concurrency of merges across shards, as we have the merge thread pool that schedules those merges. It will just be a serial one on a specific shard.
Also, on serial merge scheduler, we now have a limit of how many merges it will do at one go, so it will let other shards get their fair chance of merging. We use the pending merges on IW to check if merges are needed or not for it.
Note, that if a merge is happening, it will not block due to a sync on the maybeMerge call at indexing (flush) time, since we wrap our merge scheduler with the EnabledMergeScheduler, where maybeMerge is not activated during indexing, only with explicit calls to IW#maybeMerge (see Merges).
closes#5447
If we want to have a full picture of versions running in a cluster, we need to add a `_cat/plugins` endpoint.
Response could look like:
```sh
% curl es2:9200/_cat/plugins?v
node component version type url desc
es1 mapper-attachments 1.7.0 j Adds the attachment type allowing to parse difference attachment formats
es1 lang-javascript 1.4.0 j JavaScript plugin allowing to add javascript scripting support
es1 analysis-smartcn 1.9.0 j Smart Chinese analysis support
es1 marvel 1.1.0 j/s http://localhost:9200/_plugins/marvel Elasticsearch Management & Monitoring
es1 kopf 0.5.3 s http://localhost:9200/_plugins/kopf kopf - simple web administration tool for ElasticSearch
es2 mapper-attachments 2.0.0.RC1 j Adds the attachment type allowing to parse difference attachment formats
es2 lang-javascript 2.0.0.RC1 j JavaScript plugin allowing to add javascript scripting support
es2 analysis-smartcn 2.0.0.RC1 j Smart Chinese analysis support
```
Closes#4824.
Significance is related to the changes in document frequency observed between everyday use in the corpus and
frequency observed in the result set. The asciidocs include extensive details on the applications of this feature.
Closes#5146
This aggregation computes unique term counts using the hyperloglog++ algorithm
which uses linear counting to estimate low cardinalities and hyperloglog on
higher cardinalities.
Since this algorithm works on hashes, it is useful for high-cardinality fields
to store the hash of values directly in the index, which is the purpose of
the new `murmur3` field type. This is less necessary on low-cardinality
string fields because the aggregator is smart enough to only compute the hash
once per unique value per segment thanks to ordinals, or on numeric fields
since hashing them is very fast.
Close#5426
================
This commit extends the `CompletionSuggester` by context
informations. In example such a context informations can
be a simple string representing a category reducing the
suggestions in order to this category.
Three base implementations of these context informations
have been setup in this commit.
- a Category Context
- a Geo Context
All the mapping for these context informations are
specified within a context field in the completion
field that should use this kind of information.
Introduced two levels of randomization for the number of shards (between 1 and 10) when running tests:
1) through the existing random index template, which now sets a random number of shards that is shared across all the indices created in the same test method unless overwritten
2) through `createIndex` and `prepareCreate` methods, similar to what happens using the `indexSettings` method, which changes for every `createIndex` or `prepareCreate` unless overwritten (overwrites index template for what concerns the number of shards)
Added the following facilities to deal with the random number of shards:
- `getNumShards` to retrieve the number of shards of a given existing index, useful when doing comparisons based on the number of shards and we can avoid specifying a static number. The method returns an object containing the number of primaries, number of replicas and the total number of shards for the existing index
- added `assertFailures` that checks that a shard failure happened during a search request, either partial failure or total (all shards failed). Checks also the error code and the error message related to the failure. This is needed as without knowing the number of shards upfront, when simulating errors we can run into either partial (search returns partial results and failures) or total failures (search returns an error)
- added common methods similar to `indexSettings`, to be used in combination with `createIndex` and `prepareCreate` method and explicitly control the second level of randomization: `numberOfShards`, `minimumNumberOfShards` and `maximumNumberOfShards`. Added also `numberOfReplicas` despite the number of replicas is not randomized (default not specified but can be overwritten by tests)
Tests that specified the number of shards have been reviewed and the results follow:
- removed number_of_shards in node settings, ignored anyway as it would be overwritten by both mechanisms above
- remove specific number of shards when not needed
- removed manual shards randomization where present, replaced with ordinary one that's now available
- adapted tests that didn't need a specific number of shards to the new random behaviour
- fixed a couple of test bugs (e.g. 3 levels parent child test could only work on a single shard as the routing key used for grand-children wasn't correct)
- also done some cleanup, shared code through shard size facets and aggs tests and used common methods like `assertAcked`, `ensureGreen`, `refresh`, `flush` and `refreshAndFlush` where possible
- made sure that `indexSettings()` is always used as a basis when using `prepareCreate` to inject specific settings
- converted indexRandom(false, ...) + refresh to indexRandom(true, ...)
Supports sorting on sub-aggs down the current hierarchy. This is supported as long as the aggregation in the specified order path are of a single-bucket type, where the last aggregation in the path points to either a single-bucket aggregation or a metrics one. If it's a single-bucket aggregation, the sort will be applied on the document count in the bucket (i.e. doc_count), and if it is a metrics type, the sort will be applied on the pointed out metric (in case of a single-metric aggregations, such as avg, the sort will be applied on the single metric value)
NOTE: this commit adds a constraint on what should be considered a valid aggregation name. Aggregations names must be alpha-numeric and may contain '-' and '_'.
Closes#5253
Lucene 4.7 supports a setter for the `filler_token` that is
inserted if there are gaps in the token stream. This change exposes
this setting.
Closes#4307
In #4052 we added support for highlighting multi term queries using the postings highlighter. That worked only for top-level queries though, and not for multi term queries that are nested for instance within a bool query, or filtered query, or a constant score query.
The way we make this work is by walking the query structure and temporarily overriding the query rewrite method with a method that allows for multi terms extraction.
Closes#5102
Fixes#5128
Remove java 7 specific Locale functions, add "coming[1.1.0]" to documentation
add LocaleUtils utility class for dealing with Locale functions
Adds support for storing mustache based query templates that can later be filled
with query parameter values at execution time. Templates may be both quoted,
non-quoted and referencing templates stored in config/scripts/*.mustache by file
name.
See docs/reference/query-dsl/queries/template-query.asciidoc for templating
examples.
Implementation detail: mustache itself is being shaded as it depends directly on
guava - so having it marked optional but included in the final distribution
raises chances of version conflicts downstream.
Fixes#4879
It is now possible to specify aliases during index creation:
curl -XPUT 'http://localhost:9200/test' -d '
{
"aliases" : {
"alias1" : {},
"alias2" : {
"filter" : { "term" : {"field":"value"}}
}
}
}'
Closes#4920
In order to be consistent (and because in 1.0 we switched from
parameter driven information to specifzing the metrics as part of the URI)
this patch moves from 'plugin' to 'plugins' in the Nodes Info API.
`cross_fields` attemps to treat fields with the same analysis
configuration as a single field and uses maximum score promotion or
combination of the scores based depending on the `use_dis_max` setting.
By default scores are combined. `cross_fields` can also search across
fields of hetrogenous types for instance if numbers can be part of
the query it makes sense to search also on numeric fields if an analyzer
is provided in the reqeust.
Relates to #2959
* Mostly minor things like typos and grammar stuff
* Some clarifications
* The note on the deprecation was ambiguous. I've removed the problematic part so that it now definitely says it's deprecated
Currently, boosting on `copy_to` is misleading and does not work as originally specified in #4520. Instead of boosting just the terms from the origin field, it boosts the whole destination field. If two fields copy_to a third field, one with a boost of 2 and another with a boost of 3, all the terms in the third field end up with a boost of 6. This was not the intention.
The alternative: to store the boost in a payload for every term, results in poor performance and inflexibility. Instead, users should either (1) query the common field AND the field that requires boosting, or (2) the multi_match query will soon be able to perform term-centric cross-field matching that will allow per-field boosting at query time (coming in 1.1).
By default active, rejected and queue thread statistics are included for the index, bulk and search thread pool.
Other thread statistics of other thread pools can be included via the `h` query string parameter.
Closes#4907
Detects if rescores arrive as an array instead of a plain object. If so
then parse each element of the array as a separate rescore to be executed
one after another. It looks like this:
"rescore" : [ {
"window_size" : 100,
"query" : {
"rescore_query" : {
"match" : {
"field1" : {
"query" : "the quick brown",
"type" : "phrase",
"slop" : 2
}
}
},
"query_weight" : 0.7,
"rescore_query_weight" : 1.2
}
}, {
"window_size" : 10,
"query" : {
"score_mode": "multiply",
"rescore_query" : {
"function_score" : {
"script_score": {
"script": "log10(doc['numeric'].value + 2)"
}
}
}
}
} ]
Rescores as a single object are still supported.
Closes#4748
Removed unused misc.asciidoc file
Added plugins directory to directory layout
Fixed transport.tcp.connect_timeout value to match the code found in NetworkService.TcpSettings
Clarified that phrase query does not preserve order of terms
Clarified merge page
Added instructions on how to build documentation to docs/README
Terms aggregations return up to `size` terms, so up to now, the way to get all
matching terms back was to set `size` to an arbitrary high number that would be
larger than the number of unique terms.
Terms aggregators already made sure to not allocate memory based on the `size`
parameter so this commit mostly consists in making `0` an alias for the
maximum integer value in the TermsParser.
Close#4837
Adds a new FetchSubPhase, FieldDataFieldsFetchSubPhase, which loads the
field data cache for a field and returns an array of values for the
field.
Also removes `doc['<field>']` and `_source.<field>` workaround no longer
needed in field name resolving.
Closes#4492
* Make it clearer that `aggs` is an allowed synomym
for the `aggregations` key
* Fix broken example in for datehistogram, `1.5M` is
not an allowed interval
* Make use of colon before examples consistent
* Fix typos
- Removed "ok": true from response examples
- Added "created" flag to index response examples
- Replaced exists flag with found in delete response examples
Christoph Frick
Igor Motov
Clinton Gormley
Kouhei Sutou
Simon Willnauer
Scott Wilkerson
eliasah
Yousef
Andrew Selden
Peter Dyson
Malte Schirnacher
Sean Gallagher
Nik Everett
Costin Leau
Andrew O'Brien
wittyameta
Kevin Wang
gabriel-tessier
Martijn van Groningen
Lee Hinman
Karl Meisterheim
Alexander Reelsen
Radu Gheorghe
Binh Ly
Hannes Korte
Alex Brasetvik
Shay Banon
David Pilato
javanna
bleskes
Adrien Grand
Jun Ohtani
uboness
Florian Schilling
markharwood
Randy Stauner
lzhoucs
Justin Etheredge
rphadake
Kurt Hurtado
Andrew Raines
Konrad Feldmeier
Benjamin Devèze
Brusic
James Brook
Zachary Tong
hura
Isabel Drost-Fromm
Britta Weber
Lars Francke
Brian Yoder
Oleg Anashkin
James Yu
Mihnea Dobrescu-Balaur
Karel Minarik
Florian Gilcher
Dawid Weiss
Andy Goldstein