This commit overrides the stdout and stderr print streams to be
redirected to the main elasticsearch.log file. While the Elasticsearch
project ensures stdout and stderr are not written to, the jdk or 3rd
party libs may do this, which can be unexepected for users used to
looking the elasticsearch log.
closes#50156
Wait for the cluster to have settled down and have the same accepted version on all nodes before
executing and cancelling request so that a slow CS accept on one node doesn't make it fall behind
and then get sent the full CS because of the diff-version mismatch, breaking the mechanics of this test.
Closes#51308
Added node closed exception to the retryable remote exceptions as it's possible to run into this exception instead of a connect exception when the master node is just shutting down but still responding to requests.
* Fix Inconsistent Shard Failure Count in Failed Snapshots
This fix was necessary to allow for the below test enhancement:
We were not adding shard failure entries to a failed snapshot for those
snapshot entries that were never attempted because the snapshot failed during
the init stage and wasn't partial. This caused the never attempted snapshots
to be counted towards the successful shard count which seems wrong and
broke repository consistency tests.
Also, this change adjusts snapshot resiliency tests to run another snapshot
at the end of each test run to guarantee a correct `index.latest` blob exists
after each run.
Closes#47550
The order indices are returned in in the metadata is not guaranteed.
This commit accounts for any possible ordering in assertions about
hidden indices.
closes#51340
It is permitted for nodes to accept transport connections at addresses other
than their publish address, which allows a good deal of flexibility when
configuring discovery. However, it is not unusual for users to misconfigure
nodes to pick a publish address which is inaccessible to other nodes. We see
this happen a lot if the nodes are on different networks separated by a proxy,
or if the nodes are running in Docker with the wrong kind of network config.
In this case we offer no useful feedback to the user unless they enable
TRACE-level logs. It's particularly tricky to diagnose because if we test
connectivity between the nodes (using their discovery addresses) then all will
appear well.
This commit adds a WARN-level log if this kind of misconfiguration is detected:
the probe connection has succeeded (to indicate that we are really talking to a
healthy Elasticsearch node) but the followup connection attempt fails.
It also tidies up some loose ends in `HandshakingTransportAddressConnector`,
removing some TODOs that need not be completed, and registering its
accidentally-unregistered timeout settings.
IndexWriter might not filter out fully deleted segments if retention
leases exist or the number of the retaining operations is non-zero.
SoftDeletesDirectoryReaderWrapper, however, always filters out fully
deleted segments.
This change uses the original directory reader when calculating segment
stats instead.
Relates #51192Closes#51303
We were loading `RepositoryData` twice during snapshot initialization,
redundantly checking if a snapshot existed already.
The first snapshot existence check is somewhat redundant because a snapshot could be
created between loading `RepositoryData` and updating the cluster state with the `INIT`
state snapshot entry.
Also, it is much safer to do the subsequent checks for index existence in the repo and
and the presence of old version snapshots once the `INIT` state entry prevents further
snapshots from being created concurrently.
While the current state of things will never lead to corruption on a concurrent snapshot
creation, it could result in a situation (though unlikely) where all the snapshot's work
is done on the data nodes, only to find out that the repository generation was off during
snapshot finalization, failing there and leaving a bunch of dead data in the repository
that won't be used in a subsequent snapshot (because the shard generation was never referenced
due to the failed snapshot finalization).
Note: This is a step on the way to parallel repository operations by making snapshot related CS
and repo related CS more tightly correlated.
This reverts commit c7fd24ca1569a809b499caf34077599e463bb8d6.
Now that JDK-8236582 is fixed in JDK 14 EA, we can revert the workaround.
Relates #50523 and #50512
LuceneChangesSnapshot can be slow if nested documents are heavily used.
Also, it estimates the number of operations to be recovered in peer
recoveries inaccurately. With this change, we prefer excluding the
nested non-root documents in a Lucene query instead.
The method parameter is not used in the percentile aggs, instead
the method is determined by the presence of `hdr` or `tdigest`
objects.
Relates to #8324
After we rollover the index we wait for the configured number of shards for the
rolled index to become active (based on the index.write.wait_for_active_shards
setting which might be present in a template, or otherwise in the default case,
for the primaries to become active).
This wait might be long due to disk watermarks being tripped, replicas not
being able to spring to life due to cluster nodes reconfiguration and others
and, the RolloverStep might not complete successfully due to this inherent
transient situation, albeit the rolled index having been created.
(cherry picked from commit 457a92fb4c68c55976cc3c3e2f00a053dd2eac70)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
On master failover we have to resent all the shard failed messages,
but the transport requests remain the same in the eyes of `equals`.
If the master failover is registered and the requests to the new master
are sent before all the callbacks have executed and the request to the
old master removed from the deduplicator then the requuests to the new
master will incorrectly fail and the snapshot get stuck.
Closes#51253
Add the character position of a scripting error to error responses.
The contents of the `position` field are experimental and subject to
change. Currently, `offset` refers to the character location where the
error was encountered, `start` and `end` define a range of characters
that contain the error.
eg.
```
{
"error": {
"root_cause": [
{
"type": "script_exception",
"reason": "runtime error",
"script_stack": [
"y = x;",
" ^---- HERE"
],
"script": "def x = new ArrayList(); Map y = x;",
"lang": "painless",
"position": {
"offset": 33,
"start": 29,
"end": 35
}
}
```
Refs: #50993
This replaces the message we return for unknown queries with the standard
one that we use for unknown fields from `ObjectParser`. This is nice
because it includes "did you mean". One day we might convert parsing
queries to using object parser, but that looks complex. This change is
much smaller and seems useful.
Adding back accidentally removed jvm option that is required to enforce
start of the week = Monday in IsoCalendarDataProvider.
Adding a `feature` to yml test in order to skip running it in JDK8
commit that removed it 398c802
commit that backports SystemJvmOptions c4fbda3
relates 7.x backport of code that enforces CalendarDataProvider use #48349
The tests, when creating broken serialized blobs could randomly create
a sequence of bytes that is partially readable by the deserializer and then
not throw `IOException` but instead `ElasticsearchParseException`.
We should just handle these unexpected exceptions downstream properly and pass them
wrapped as `RepositoryException` to the listener to fix the test and keep the API consistent.
This change introduces a new feature for indices so that they can be
hidden from wildcard expansion. The feature is referred to as hidden
indices. An index can be marked hidden through the use of an index
setting, `index.hidden`, at creation time. One primary use case for
this feature is to have a construct that fits indices that are created
by the stack that contain data used for display to the user and/or
intended for querying by the user. The desire to keep them hidden is
to avoid confusing users when searching all of the data they have
indexed and getting results returned from indices created by the
system.
Hidden indices have the following properties:
* API calls for all indices (empty indices array, _all, or *) will not
return hidden indices by default.
* Wildcard expansion will not return hidden indices by default unless
the wildcard pattern begins with a `.`. This behavior is similar to
shell expansion of wildcards.
* REST API calls can enable the expansion of wildcards to hidden
indices with the `expand_wildcards` parameter. To expand wildcards
to hidden indices, use the value `hidden` in conjunction with `open`
and/or `closed`.
* Creation of a hidden index will ignore global index templates. A
global index template is one with a match-all pattern.
* Index templates can make an index hidden, with the exception of a
global index template.
* Accessing a hidden index directly requires no additional parameters.
Backport of #50452
When you declare an ObjectParser with top level named objects like we do
with `significant_terms` we didn't support "did you mean". This fixes
that.
Relates #50938
* Fix Infinite Retry Loop in loading RepositoryData
We were running into an infinite loop when trying to load corrupted (or otherwise un-loadable)
repository data for a repo that uses best effort consistency (e.g. that was just freshly mounted
as done in the test) because we kepy resetting to `-1` on `IOException`, listing and finding the broken
generation `N` and then interpreted the subsequent reset to `-1` as a concurrent change to the repository.
This moves the testing of custom significance heuristic plugins from an
`ESIntegTestCase` to an example plugin. This is *much* more "real" and
can be used as an example for anyone that needs to actually build such a
plugin. The old test had testing concerns and the example all jumbled
together.
The PreConfiguredTokenFilter#singletonWithVersion uses the version
internally for the token filter factories but it registers only one
instance in the cache and not one instance per version. This can lead
to exceptions like the one described in #50734 since the singleton is
created and cached using the version created of the first index
that is processed.
Remove the singletonWithVersion() methods and use the
elasticsearchVersion() methods instead.
Fixes: #50734
(cherry picked from commit 24e1858)
Backport: #50467
This commit adds the name of the current pipeline to ingest metadata.
This pipeline name is accessible under the following key: '_ingest.pipeline'.
Example usage in pipeline:
PUT /_ingest/pipeline/2
{
"processors": [
{
"set": {
"field": "pipeline_name",
"value": "{{_ingest.pipeline}}"
}
}
]
}
Closes#42106
Index templates created in the 5x line can still be present in the cluster state
through multiple upgrades, and may have more than one mapping defined. 8x
will stop supporting templates with multiple mappings, and we should emit
deprecation warnings in 7x clusters to give users a chance to update their
templates before upgrading.
Check it out:
```
$ curl -u elastic:password -HContent-Type:application/json -XPOST localhost:9200/test/_update/foo?pretty -d'{
"dac": {}
}'
{
"error" : {
"root_cause" : [
{
"type" : "x_content_parse_exception",
"reason" : "[2:3] [UpdateRequest] unknown field [dac] did you mean [doc]?"
}
],
"type" : "x_content_parse_exception",
"reason" : "[2:3] [UpdateRequest] unknown field [dac] did you mean [doc]?"
},
"status" : 400
}
```
The tricky thing about implementing this is that x-content doesn't
depend on Lucene. So this works by creating an extension point for the
error message using SPI. Elasticsearch's server module provides the
"spell checking" implementation.
s
We seem to have settled on the `ContextParser` interface for parsing
stuff, mostly because `ObjectParser` implements it. We don't really
*need* the old `Aggregator.Parser` interface any more because it
duplicates `ContextParser` but with the arguments reversed.
This adds support to `AggregationSpec` to declare aggregation parsers
using `ContextParser`. This should integrate cleanly with
`ObjectParser`. It doesn't drop support for `Aggregator.Parser` or
change the plugin intrface at all so it *should* be safe to backport to
7.x. And we can remove `Aggregator.Parser` in a follow up which is only
targeted to 8.0.
We added a new rounding in #50609 that handles offsets to the start and
end of the rounding so that we could support `offset` in the `composite`
aggregation. This starts moving `date_histogram` to that new offset.
* Adds support for geo-bounds filtering in geogrid aggregations (#50002)
It is fairly common to filter the geo point candidates in
geohash_grid and geotile_grid aggregations according to some
viewable bounding box. This change introduces the option of
specifying this filter directly in the tiling aggregation.
This is even more relevant to `geo_shape` where the bounds will restrict
the shape to be within the bounds
this optional `bounds` parameter is parsed in an equivalent fashion to
the bounds specified in the geo_bounding_box query.
* Track Snapshot Version in RepositoryData (#50930)
Add tracking of snapshot versions to RepositoryData to make BwC logic more efficient.
Follow up to #50853
Currently, proxy mode allows a remote cluster connection to be setup by
expecting all open connections to be routed through an intermediate
proxy. The proxy must use some logic to ensure that the connections end
up on the correct remote cluster. One mechanism provided is that the
default distribution TLS implementations will forward the host component
of the configured address to the remote connection using the SNI
extension. This is limiting as it requires that the proxy be configured
in a way that always uses a valid hostname as the proxy address.
Instead, this commit adds an additional setting to allow the server_name
to be configured independently. This allows the proxy address to be
specified as a IP literal, but the server_name specified as an arbitrary
string which still must be a valid hostname. It also decouples the
server_name from the requirement of being a DNS resolvable domain.
Generally speaking, deprecated analysis components in elasticsearch will issue deprecation
warnings when they are first used. However, this means that no warnings are emitted when
indexes are created with deprecated components, and users have to actually index a document
to see warnings. This makes it much harder to see these warnings and act on them at
appropriate times.
This is worse in the case where components throw exceptions on upgrade. In this case, users
will not be aware of a problem until a document is indexed, instead of at index creation time.
This commit adds a new check that pushes an empty string through all user-defined analyzers
and normalizers when an IndexAnalyzers object is built for each index; deprecation warnings
and exceptions are now emitted when indexes are created or opened.
Fixes#42349
* Move metadata storage to Lucene (#50907)
Today we split the on-disk cluster metadata across many files: one file for the metadata of each
index, plus one file for the global metadata and another for the manifest. Most metadata updates
only touch a few of these files, but some must write them all. If a node holds a large number of
indices then it's possible its disks are not fast enough to process a complete metadata update before timing out. In severe cases affecting master-eligible nodes this can prevent an election
from succeeding.
This commit uses Lucene as a metadata storage for the cluster state, and is a squashed version
of the following PRs that were targeting a feature branch:
* Introduce Lucene-based metadata persistence (#48733)
This commit introduces `LucenePersistedState` which master-eligible nodes
can use to persist the cluster metadata in a Lucene index rather than in
many separate files.
Relates #48701
* Remove per-index metadata without assigned shards (#49234)
Today on master-eligible nodes we maintain per-index metadata files for every
index. However, we also keep this metadata in the `LucenePersistedState`, and
only use the per-index metadata files for importing dangling indices. However
there is no point in importing a dangling index without any shard data, so we
do not need to maintain these extra files any more.
This commit removes per-index metadata files from nodes which do not hold any
shards of those indices.
Relates #48701
* Use Lucene exclusively for metadata storage (#50144)
This moves metadata persistence to Lucene for all node types. It also reenables BWC and adds
an interoperability layer for upgrades from prior versions.
This commit disables a number of tests related to dangling indices and command-line tools.
Those will be addressed in follow-ups.
Relates #48701
* Add command-line tool support for Lucene-based metadata storage (#50179)
Adds command-line tool support (unsafe-bootstrap, detach-cluster, repurpose, & shard
commands) for the Lucene-based metadata storage.
Relates #48701
* Use single directory for metadata (#50639)
Earlier PRs for #48701 introduced a separate directory for the cluster state. This is not needed
though, and introduces an additional unnecessary cognitive burden to the users.
Co-Authored-By: David Turner <david.turner@elastic.co>
* Add async dangling indices support (#50642)
Adds support for writing out dangling indices in an asynchronous way. Also provides an option to
avoid writing out dangling indices at all.
Relates #48701
* Fold node metadata into new node storage (#50741)
Moves node metadata to uses the new storage mechanism (see #48701) as the authoritative source.
* Write CS asynchronously on data-only nodes (#50782)
Writes cluster states out asynchronously on data-only nodes. The main reason for writing out
the cluster state at all is so that the data-only nodes can snap into a cluster, that they can do a
bit of bootstrap validation and so that the shard recovery tools work.
Cluster states that are written asynchronously have their voting configuration adapted to a non
existing configuration so that these nodes cannot mistakenly become master even if their node
role is changed back and forth.
Relates #48701
* Remove persistent cluster settings tool (#50694)
Adds the elasticsearch-node remove-settings tool to remove persistent settings from the on
disk cluster state in case where it contains incompatible settings that prevent the cluster from
forming.
Relates #48701
* Make cluster state writer resilient to disk issues (#50805)
Adds handling to make the cluster state writer resilient to disk issues. Relates to #48701
* Omit writing global metadata if no change (#50901)
Uses the same optimization for the new cluster state storage layer as the old one, writing global
metadata only when changed. Avoids writing out the global metadata if none of the persistent
fields changed. Speeds up server:integTest by ~10%.
Relates #48701
* DanglingIndicesIT should ensure node removed first (#50896)
These tests occasionally failed because the deletion was submitted before the
restarting node was removed from the cluster, causing the deletion not to be
fully acked. This commit fixes this by checking the restarting node has been
removed from the cluster.
Co-authored-by: David Turner <david.turner@elastic.co>
* fix tests
Co-authored-by: David Turner <david.turner@elastic.co>
Currently, the connection manager is configured with a default profile
for both the sniff and proxy connection stratgies. This profile
correctly reflects the expected number of connection (6 for sniff, 18
for proxy). This commit removes the proxy strategy usages of the per
connection attempt profile configuration.
Additionally, it refactors other unnecessary code around the connection
manager. The connection manager now can always be built inside the
remote connection.
Currently we reuse the same test connection for all connection attempts
in the testConcurrentConnectsAndDisconnects test. This means that if the
connection fails due to a pre-existing connection, the connection will
be closed impacting the state of all connection attempts. This commit
fixes the test, by returning a unique connection for each attempt.
Fixes#49903.
Follow up to #50692 that starts writing a `min_version` field to
the `RepositoryData` so that pre-7.6 ES versions can not read it
(and potentially corrupt it if they attempt to modify the repo contents)
after the repository moved to the new metadata format.
When deserializing time zones in the Rounding classes we used to include a tiny
normalization step via `DateUtils.of(in.readString())` that was lost in #50609.
Its at least necessary for some tests, e.g. the cause of #50827 is that when
sending the default time zone ZoneOffset.UTC on a stream pre 7.0 we convert it
to a "UTC" string id via `DateUtils.zoneIdToDateTimeZone`. This gets then read
back as a UTC ZoneRegion, which should behave the same but fails the equality
tests in our serialization tests. Reverting to the previous behaviour with an
additional normalization step on 7.x.
Co-authored-by: Nik Everett <nik9000@gmail.com>
Closes#50827
Today we make multiple attempts to corrupt the translog header in
`TranslogHeaderTests#testCurrentHeaderVersion`, but if we are extraordinarily
unlucky then this sequence of corruptions may restore the file to its original
state. This change adjusts the test to only corrupt the file once, which is
certain not to leave the file in its original state.
The test checked queue size and active count, however,
ThreadPoolExecutor pulls out the request from the queue before marking
the worker active, risking that we think all tasks are done when they
are not. Now check on completed-tasks metric instead, which is
guaranteed to be monotonic.
Relates #50769
Today we periodically check the indexing buffer memory every 5 seconds
or after we have used 1/30 of the configured memory. If the total used
memory is over the threshold, then we refresh the "largest" shards. If
refreshing takes longer these intervals (i.e., 5s or 1/30 buffer), then
we continue to enqueue refreshes to these shards. This leads to two
issues:
- The refresh thread pool can be exhausted and other shards can't refresh
- Execute too many refreshes for the "largest" shards
With this change, we only refresh the largest shards if they are not refreshing.
Here we rely on the periodic check to trigger another refresh if needed. We can
harden this by making the ongoing refresh triggers the memory check when
it's completed. I opted out this option in this PR for simplicity.
See: https://discuss.elastic.co/t/write-queue-continue-to-rise/213652/
When a composite aggregation is reduced using the results from an
index that has one of the fields unmapped we were throwing away the
formatter. This is mildly annoying, except in the case of IP addresses
which were coming out as non-utf-8-characters. And tripping assertions.
This carefully preserves the formatter from the working bucket.
Closes#50600
This change fixes the upgrade of index metadata that contain
a custom similarity with options that are not compatible with BM25.
The upgrade doesn't need a real similarity service so we fake one that
resolves all custom similarity to BM25 but this logic fails because the
BM25 provider checks that all options are compatible. This commit removes
the verification step as it is not needed during the upgrade (the verification
is done when the index is restored/opened).
Closes#50763
* Fix Snapshot Shard Status Request Deduplication
The request deduplication didn't actually work for these requests
since they had no `equals` and `hashCode` so the deduplicator wouldn't
actually recognize equal requests.
Replaces the "funny"
`Function<String, ConstructingObjectParser<T, Void>>` with a much
simpler `ConstructingObjectParser<T, String>`. This makes pretty much
all of our object parsers static.
* Fix Snapshot Repository Corruption in Downgrade Scenarios (#50692)
This PR introduces test infrastructure for downgrading a cluster while interacting with a given repository.
It fixes the fact that repository metadata in the new format could be written while there's still older snapshots in the repository that require the old-format metadata to be restorable.
A very large number of recursive calls can cause a stack overflow
exception. This commit forks the recursive calls for non-async
processors. Once forked, each thread will handle at most 10
recursive calls to help keep the stack size and thread count
down to a reasonable size.
Adds support for the `offset` parameter to the `date_histogram` source
of composite aggs. The `offset` parameter is supported by the normal
`date_histogram` aggregation and is useful for folks that need to
measure things from, say, 6am one day to 6am the next day.
This is implemented by creating a new `Rounding` that knows how to
handle offsets and delegates to other rounding implementations. That
implementation doesn't fully implement the `Rounding` contract, namely
`nextRoundingValue`. That method isn't used by composite aggs so I can't
be sure that any implementation that I add will be correct. I propose to
leave it throwing `UnsupportedOperationException` until I need it.
Closes#48757
Previously, the following situation would throw an error:
* A search contains a `collapse` on a particular field.
* The search spans multiple indices, and in one index the field is mapped as a
concrete field, but in another it is a field alias.
The error occurs when we attempt to merge `CollapseTopFieldDocs` across shards.
When merging, we validate that the name of the collapse field is the same across
shards. But the name has already been resolved to the concrete field name, so it
will be different on shards where the field was mapped as an alias vs. shards
where it was a concrete field.
This PR updates the collapse field name in `CollapseTopFieldDocs` to the
original requested field, so that it will always be consistent across shards.
Note that in #32648, we already made a fix around collapsing on field aliases.
However, we didn't test this specific scenario where the field was mapped as an
alias in only one of the indices being searched.
Currently, if an updateable synonym filter is included in a multiplexer filter,
it is not reloaded via the _reload_search_analyzers because the multiplexer
itself doesn't pass on the analysis mode of the filters it contains, so its not
recognized as "updateable" in itself. Instead we can check and merge the
AnalysisMode settings of all filters in the multiplexer and use the resulting
mode (e.g. search-time only) for the multiplexer itself, thus making any synonym
filters contained in it reloadable. This, of course, will also make the
analyzers using the multiplexer be usable at search-time only.
Closes#50554
strict_date_optional_time changes to have optional minute part.
It already allowed optional second and fraction of second part.
This allows parsing 2018-01-01T00+01 , 2018-01-01T00:00+01 , 2018-01-01T00:00:00+01 , 2018-01-01T00:00:00.000+01
It won't allow parsing a timezone without an hour part as this is not allowed by iso8601 spec
closes#49351
ElasticsearchException.guessRootCauses would return wrapper exception if
inner exception was not an ElasticsearchException. Fixed to never return
wrapper exceptions.
At least following APIs change root_cause.0.type as a result:
_update with bad script
_index with bad pipeline
Relates #50417
This PR adds per-field metadata that can be set in the mappings and is later
returned by the field capabilities API. This metadata is completely opaque to
Elasticsearch but may be used by tools that index data in Elasticsearch to
communicate metadata about fields with tools that then search this data. A
typical example that has been requested in the past is the ability to attach
a unit to a numeric field.
In order to not bloat the cluster state, Elasticsearch requires that this
metadata be small:
- keys can't be longer than 20 chars,
- values can only be numbers or strings of no more than 50 chars - no inner
arrays or objects,
- the metadata can't have more than 5 keys in total.
Given that metadata is opaque to Elasticsearch, field capabilities don't try to
do anything smart when merging metadata about multiple indices, the union of
all field metadatas is returned.
Here is how the meta might look like in mappings:
```json
{
"properties": {
"latency": {
"type": "long",
"meta": {
"unit": "ms"
}
}
}
}
```
And then in the field capabilities response:
```json
{
"latency": {
"long": {
"searchable": true,
"aggreggatable": true,
"meta": {
"unit": [ "ms" ]
}
}
}
}
```
When there are no conflicts, values are arrays of size 1, but when there are
conflicts, Elasticsearch includes all unique values in this array, without
giving ways to know which index has which metadata value:
```json
{
"latency": {
"long": {
"searchable": true,
"aggreggatable": true,
"meta": {
"unit": [ "ms", "ns" ]
}
}
}
}
```
Closes#33267
Introduce a new static setting, `gateway.auto_import_dangling_indices`, which prevents dangling indices from being automatically imported. Part of #48366.
In security we currently monitor a set of files for changes:
- config/role_mapping.yml (or alternative configured path)
- config/roles.yml
- config/users
- config/users_roles
This commit prevents unnecessary reloading when the file change actually doesn't change the internal structure.
Backport of: #50207
Co-authored-by: Anton Shuvaev <anton.shuvaev91@gmail.com>
We *very* commonly have object with ctors like:
```
public Foo(String name)
```
And then declare a bunch of setters on the object. Every aggregation
works like this, for example. This change teaches `ObjectParser` how to
build these aggregations all on its own, without any help. This'll make
it much cleaner to parse aggs, and, probably, a bunch of other things.
It'll let us remove lots of wrapping. I've used this new power for the
`avg` aggregation just to prove that it works outside of a unit test.
If an auto-refresh happens, then version_map_memory is reset to 0. By
default, the auto-refresh occurs for every second in the first 30
seconds until search becomes idle.
Closes#50362
In 7.x an internal API used for validating remote cluster does not throw, see #50420 for the
details. This change implements a workaround for remote cluster validation, only for 7.x branches.
fixes#50420
A failure of a recovering shard can race with a new allocation of the shard, and cause the new
allocation to be failed as well. This can result in a shard being marked as initializing in the cluster
state, but not exist on the node anymore.
Closes#50508
This change removes a no longer used method, `fromByte`, in
IndicesOptions. This method was necessary for backwards compatibility
with versions prior to 6.4.0 and was used when talking to those
versions. However, the minimum wire compatibility version has changed
and we no longer use this code.
Backport of #50665
This replaces the hand written xcontent parsers for significance
heristics with `ObjectParser` and parsing named xcontent.
As a happy accident, this was the last user of `ParseFieldRegistry` so
this PR entirely removes that class.
Closes#25519
Currently, we use delayed address resolution in the proxy strategy tests
to allow tests to connect to different addresses. Unfortunately, this
has the potential to introduce races as the address is resolved each
connection attempt. The number of connection attempts can vary based on
when connections are opening and closing. This commit modifies the test
be allowing them to specifically control which address is used.
Related to #50618
This test code fixes a serialization test bug:
https://gradle-enterprise.elastic.co/s/7x2ct6yywkw3o
Rarely stats for the same processor are generated and
the production code then sums up these stats. However
the test code wasn't summing up in that case,
which caused inconsistencies between the actual and expected results.
Closes#50507
Previously, as long as a deleted version value was kept as a tombstone,
another index or delete operation against the same id would leak that
the doc had existed (through seq_no info) or would allow the operation
if the client forged the seq_no. Fixed to disregard info on deleted docs
when doing seq_no based optimistic concurrency check.
Today the `InternalClusterInfoService` collects information on the sizes of
shards of open indices, but does not consider closed indices. This means that
shards of closed indices are treated as having zero size when they are being
allocated. This commit fixes this, obtaining the sizes of all shards.
Relates #33888
* Adds JavaDoc to `AbstractWireTestCase` and
`AbstractWireSerializingTestCase` so it is more obvious you should prefer
the latter if you have a choice
* Moves the `instanceReader` method out of `AbstractWireTestCase` becaue
it is no longer used.
* Marks a bunch of methods final so it is more obvious which classes are
for what.
* Cleans up the side effects of the above.
We have about 800 `ObjectParsers` in Elasticsearch, about 700 of which
are final. This is *probably* the right way to declare them because in
practice we never mutate them after they are built. And we certainly
don't change the static reference. Anyway, this adds `final` to these
parsers.
I found the non-final parsers with this:
```
diff \
<(find . -type f -name '*.java' -exec grep -iHe 'static.*PARSER\s*=' {} \+ | sort) \
<(find . -type f -name '*.java' -exec grep -iHe 'static.*final.*PARSER\s*=' {} \+ | sort) \
2>&1 | grep '^<'
```
A geo box with a top value of Double.NEGATIVE_INFINITY will yield an empty
xContent which translates to a null `geoBoundingBox`. This commit marks the
field as `Nullable` and guards against null when retrieving the `topLeft`
and `bottomRight` fields.
Fixes https://github.com/elastic/elasticsearch/issues/50505
(cherry picked from commit 051718f9b1e1ca957229b01e80d7b79d7e727e14)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
This marks a couple of constants in the `DecayFunctionBuilder` as final.
They are written in CONSTANT_CASE and used as constants but not final
which is a little confusing and might lead to sneaky bugs.
FutureUtils.get() would unwrap ElasticsearchWrapperExceptions. This
is trappy, since nearly all usages of FutureUtils.get() expected only to
not have to deal with checked exceptions.
In particular, StepListener builds upon ListenableFuture which uses
FutureUtils.get to be informed about the exception passed to onFailure.
This had the bad consequence of masking away any exception that was an
ElasticsearchWrapperException like RemoteTransportException.
Specifically for recovery, this made CircuitBreakerExceptions happening
on the target node look like they originated from the source node.
The only usage that expected that behaviour was AdapterActionFuture.
The unwrap behaviour has been moved to that class.
Today we log changes to index settings like this:
updating [index.setting.blah] from [A] to [B]
The identity of the index whose settings were updated is conspicuously absent
from this message. This commit addresses this by adding the index name to these
messages.
Fixes#49818.
This intervals source will return terms that are similar to an input term, up to
an edit distance defined by fuzziness, similar to FuzzyQuery.
Closes#49595
The cat nodes API performs a `ClusterStateAction` then a `NodesInfoAction`.
Today it accepts the `?local` parameter and passes this to the
`ClusterStateAction` but this parameter has no effect on the `NodesInfoAction`.
This is surprising, because `GET _cat/nodes?local` looks like it might be a
completely local call but in fact it still depends on every node in the
cluster.
This commit deprecates the `?local` parameter on this API so that it can be
removed in 8.0.
Relates #50088
testCancelRecoveryDuringPhase1 uses a mock of IndexShard, which can't
create retention leases. We need to stub method createRetentionLease.
Relates #50351Closes#50424
The additional change to the original PR (#49657), is that `org.elasticsearch.client.cluster.RemoteConnectionInfo` now parses the initial_connect_timeout field as a string instead of a TimeValue instance.
The reason that this is needed is because that the initial_connect_timeout field in the remote connection api is serialized for human consumption, but not for parsing purposes.
Therefore the HLRC can't parse it correctly (which caused test failures in CI, but not in the PR CI
:( ). The way this field is serialized needs to be changed in the remote connection api, but that is a breaking change. We should wait making this change until rest api versioning is introduced.
Co-Authored-By: j-bean <anton.shuvaev91@gmail.com>
Co-authored-by: j-bean <anton.shuvaev91@gmail.com>
Today, the replica allocator uses peer recovery retention leases to
select the best-matched copies when allocating replicas of indices with
soft-deletes. We can employ this mechanism for indices without
soft-deletes because the retaining sequence number of a PRRL is the
persisted global checkpoint (plus one) of that copy. If the primary and
replica have the same retaining sequence number, then we should be able
to perform a noop recovery. The reason is that we must be retaining
translog up to the local checkpoint of the safe commit, which is at most
the global checkpoint of either copy). The only limitation is that we
might not cancel ongoing file-based recoveries with PRRLs for noop
recoveries. We can't make the translog retention policy comply with
PRRLs. We also have this problem with soft-deletes if a PRRL is about to
expire.
Relates #45136
Relates #46959
Both geo_bounding_box query and geo_bounds aggregation have
a very similar definition of a "bounding box". A lot of this
logic (serialization, xcontent-parsing, etc) can be centralized
instead of having separated efforts to do the same things
This commit makes the TransportRolloverAction more resilient, by having it execute
only one cluster state update that creates the new (rollover index), rolls over
the alias from the source to the target index and set the RolloverInfo on the
source index. Before these 3 steps were represented as 3 chained cluster state
updates, which would've seen the user manually intervene if, say, the alias
rollover cluster state update (second in the chain) failed but the creation of
the rollover index (first in the chain) update succeeded
* Rename innerExecute to applyAliasActions
(cherry picked from commit 1ba4339a0c73ef3354b8c8b44b628fc55f1dbc78)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Co-authored-by: Daniel Huang <danielhuang@tencent.com>
This is a spinoff of #48130 that generalizes the proposal to allow early termination with the composite aggregation when leading sources match a prefix or the entire index sort specification.
In such case the composite aggregation can use the index sort natural order to early terminate the collection when it reaches a composite key that is greater than the bottom of the queue.
The optimization is also applicable when a query other than match_all is provided. However the optimization is deactivated for sources that match the index sort in the following cases:
* Multi-valued source, in such case early termination is not possible.
* missing_bucket is set to true
Follow-up to #48974 that ensures that replicas are only auto-expanded according to allocation
filtering rules once all nodes are upgraded to a version that supports this. Helps with
orchestrating cluster upgrades.
refactors source and dest validation, adds support for CCS, makes resolve work like reindex/search, allow aliased dest index with a single write index.
fixes#49988fixes#49851
relates #43201
The built-in task index mapping has a version field in its metadata, so that
the TaskResultsService can check to see if it needs to update mappings when
a new task result is stored. #48393 updated this version in TaskResultsService
but omitted to change the version in the mapping itself, so a mapping update
is applied every time a new task result is stored.
This commit updates the mapping version so that it corresponds to the version
in TaskResultsService.
Follow-up to #48974 that ensures that replicas are only auto-expanded according to allocation
filtering rules once all nodes are upgraded to a version that supports this. Helps with
orchestrating cluster upgrades.
* Update remote cluster stats to support simple mode (#49961)
Remote cluster stats API currently only returns useful information if
the strategy in use is the SNIFF mode. This PR modifies the API to
provide relevant information if the user is in the SIMPLE mode. This
information is the configured addresses, max socket connections, and
open socket connections.
* Send hostname in SNI header in simple remote mode (#50247)
Currently an intermediate proxy must route conncctions to the
appropriate remote cluster when using simple mode. This commit offers
a additional mechanism for the proxy to route the connections by
including the hostname in the TLS SNI header.
* Rename the remote connection mode simple to proxy (#50291)
This commit renames the simple connection mode to the proxy connection
mode for remote cluster connections. In order to do this, the mode specific
settings which we namespaced by their mode (ex: sniff.seed and
proxy.addresses) have been reverted.
* Modify proxy mode to support a single address (#50391)
Currently, the remote proxy connection mode uses a list setting for the
proxy address. This commit modifies this so that the setting is
proxy_address and only supports a single remote proxy address.
Avoid backwards incompatible changes for 8.x and 7.6 by removing type
restriction on compile and Factory. Factories may optionally implement
ScriptFactory. If so, then they can indicate determinism and thus
cacheability.
**Backport**
Relates: #49466
We randomly generate intervals sources to test serialization and query generation
in IntervalQueryBuilderTests. However, rarely we can generate a query that has
too many nested disjunctions, resulting in query rewrites running afoul of the maximum
boolean clause limit.
This commit reduces the maximum depth of the randomly generated intervals source
to make running into this limit much more unlikely.
* Extract IndexCreationTask execute into applyCreateIndexRequest
This is the first step in preparation for separating the index creation into a few
steps that only deal with the cluster state mutation and removing the IndexCreationTask
altogether.
* Split applyCreateIndexRequest
This breaks down the logic in applyCreateIndexRequest into multiple
steps that will hopefully make the service more readable and unit testable.
The service creation process now goes through a few well defined steps,
namely find the templates that possibly match the new index, parse the
requested and template matching mappings, process the index and template
matching settings, validate the wait for active shards request and
create the `IndexService`, update the mappings in the `MapperService` (which
is grouped together with creating the sort order for validation purposes),
validate the requested and templated matching aliases and finally update
the `ClusterState` to reflect the requested changes.
This also removes the `IndexCreationTask` as it was a shallow
indirection and migrates the tests from `IndexCreationTaskTests` to
`MetaDataCreateIndexServiceTests` (making them "real" unit tests
operating on the `ClusterState` rather than mocks).
* Add more unit tests.
* Add IT to verify we cleanup in case of failure
(cherry picked from commit 57e6269f750471f05a1a79539ca45361b9e3c2b5)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
# Conflicts:
# server/src/main/java/org/elasticsearch/cluster/metadata/MetaDataCreateIndexService.java
# server/src/test/java/org/elasticsearch/action/admin/indices/create/CreateIndexIT.java
# server/src/test/java/org/elasticsearch/cluster/metadata/IndexCreationTaskTests.java
Cache results from queries that use scripts if they use only
deterministic API calls. Nondeterministic API calls are marked in the
whitelist with the `@nondeterministic` annotation. Examples are
`Math.random()` and `new Date()`.
Refs: #49466
Loading shard state information during shard allocation sometimes runs into a situation where a
data node does not know yet how to look up the shard on disk if custom data paths are used.
The current implementation loads the index metadata from disk to determine what the custom
data path looks like. This PR removes this dependency, simplifying the lookup.
Relates #48701
Backport #50244 to 7.x branch.
If a processor executes asynchronously and the ingest simulate api simulates with
multiple documents then the order of the documents in the response may not match
the order of the documents in the request.
Alexander Reelsen discovered this issue with the enrich processor with the following reproduction:
```
PUT cities/_doc/munich
{"zip":"80331","city":"Munich"}
PUT cities/_doc/berlin
{"zip":"10965","city":"Berlin"}
PUT /_enrich/policy/zip-policy
{
"match": {
"indices": "cities",
"match_field": "zip",
"enrich_fields": [ "city" ]
}
}
POST /_enrich/policy/zip-policy/_execute
GET _cat/indices/.enrich-*
POST /_ingest/pipeline/_simulate
{
"pipeline": {
"processors" : [
{
"enrich" : {
"policy_name": "zip-policy",
"field" : "zip",
"target_field": "city",
"max_matches": "1"
}
}
]
},
"docs": [
{ "_id": "first", "_source" : { "zip" : "80331" } } ,
{ "_id": "second", "_source" : { "zip" : "50667" } }
]
}
```
* fixed test compile error
We can simply filter out shard generation updates for indices
that were removed from the cluster state concurrently to fix
index deletes during partial snapshots as that completely removes
any reference to those shards from the snapshot.
Follow up to #50202Closes#50200
Follow up to #49729
This change removes falling back to listing out the repository contents to find the latest `index-N` in write-mounted blob store repositories.
This saves 2-3 list operations on each snapshot create and delete operation. Also it makes all the snapshot status APIs cheaper (and faster) by saving one list operation there as well in many cases.
This removes the resiliency to concurrent modifications of the repository as a result and puts a repository in a `corrupted` state in case loading `RepositoryData` failed from the assumed generation.
G1GC will use humongous allocations when an allocation exceeds half the
chosen region size, which is minimum 1MB. By reducing the recovery
buffer size by 16 bytes we ensure that the recovery buffer is never
allocated as a humongous allocation.
Today we do not consider trimAboveSeqNo when calculating the translog
generation of an index commit. If there is no new indexing after the
primary promotion, then we won't be able to clean up the translog.
Backport of #49612.
The current Docker entrypoint script picks up environment variables and
translates them into -E command line arguments. However, since any tool
executes via `docker exec` doesn't run the entrypoint, it results in
a poorer user experience.
Therefore, refactor the env var handling so that the -E options are
generated in `elasticsearch-env`. These have to be appended to any
existing command arguments, since some CLI tools have subcommands and
-E arguments must come after the subcommand.
Also extract the support for `_FILE` env vars into a separate script, so
that it can be called from more than once place (the behaviour is
idempotent).
Finally, add noop -E handling to CronEvalTool for parity, and support
`-E` in MultiCommand before subcommands.
With #45689 making it so that index metadata is written
after all shards have been snapshotted we can't delete indices
that are part of the upcoming snapshot finalization any longer
and it is not sufficient to check if all shards of an index have been
snapshotted before deciding that it is safe to delete it.
This change forbids deleting any index that is in the process of being
snapshot to avoid issues during snapshot finalization.
Relates #50200 (doesn't fully fix yet because we're not fixing the `partial=true`
snapshot case here
* Remove BlobContainer Tests against Mocks
Removing all these weird mocks as asked for by #30424.
All these tests are now part of real repository ITs and otherwise left unchanged if they had
independent tests that didn't call the `createBlobStore` method previously.
The HDFS tests also get added coverage as a side-effect because they did not have an implementation
of the abstract repository ITs.
Closes#30424
Lucene 8.4 added support for "CONTAINS", therefore in this commit those
changes are integrated in Elasticsearch. This commit contains as well a
bug fix when querying with a geometry collection with "DISJOINT" relation.
Since 7.4, we switch from translog to Lucene as the source of history
for peer recoveries. However, we reduce the likelihood of
operation-based recoveries when performing a full cluster restart from
pre-7.4 because existing copies do not have PPRL.
To remedy this issue, we fallback using translog in peer recoveries if
the recovering replica does not have a peer recovery retention lease,
and the replication group hasn't fully migrated to PRRL.
Relates #45136
Today we do not use retention leases in peer recovery for closed indices
because we can't sync retention leases on closed indices. This change
allows that ability and adjusts peer recovery to use retention leases
for all indices with soft-deletes enabled.
Relates #45136
Co-authored-by: David Turner <david.turner@elastic.co>
A recent change around date parsing (#46675) made it stricter, so we should now also
catch DateTimeExceptions in DateFieldMapper and ignore those when the
`ignore_malformed` option is set.
Closes#50081
When decoupling the pipeline reduction from regular agg reduction,
MultiBucket aggs were modified to reduce their bucket's pipeline
aggs first before reducing the sibling aggs. This modification
was missed on SingleBucket aggs, meaning any SingleBucket would
fail to reduce any pipeline sub-aggs
* Remove Unused Single Delete in BlobStoreRepository
There are no more production uses of the non-bulk delete or the delete that throws
on missing so this commit removes both these methods.
Only the bulk delete logic remains. Where the bulk delete was derived from single deletes,
the single delete code was inlined into the bulk delete method.
Where single delete was used in tests it was replaced by bulk deleting.
* Better Logging GCS Blobstore Mock
Two things:
1. We should just throw a descriptive assertion error and figure out why we're not reading a multi-part instead of
returning a `400` and failing the tests that way here since we can't reproduce these 400s locally.
2. We were missing logging the exception on a cleanup delete failure that coincides with the `400` issue in tests.
Relates #49429
This commit ensures deseriable a GetResult from StreamInput does not
leave metaFields and documentFields null. This could cause an NPE in
situations where upsert response for a document that did not exist is
passed back to a node that forwarded the upsert request.
closes#48215
Currently we do not know the size of the transport header (map of
request response headers, features array, and action name). This means
that we must read the entire transport message to dependably act on the
headers. This commit adds an int indicating the size of the transport
headers. With this addition we can act upon the headers prior to reading
the entire message.
Adjusts the subclasses of `TransportMasterNodeAction` to use their own loggers
instead of the one for the base class.
Relates #50056.
Partial backport of #46431 to 7.x.
Ryan Ernst
Ryan Ernst
Armin Braun
Nhat Nguyen
David Turner
Henning Andersen
Nirmal Chidambaram
Igor Motov
Andrei Dan
Stuart Tettemer
Nik Everett
Paul Sanwald
Przemyslaw Gomulka
zacharymorn
Jay Modi
Zachary Tong
Marios Trivyzas
Martijn van Groningen
Yannick Welsch
Alan Woodward
Tal Levy
Tim Brooks
Christoph Büscher
Jim Ferenczi
Jake Landis
Julie Tibshirani
Adrien Grand
Rory Hunter
Tim Vernum
Hendrik Muhs
Nikita Glashenko
kkewwei
Oleg
Aleksandr Maus
Zachary Tong
Ignacio Vera