We don't need to hold on to the request body past the beginning of sending
the response. There is no need to keep a reference to it until after the response
has been sent fully and we can eagerly release it here.
Note, this can be optimized further to release the contents even earlier but for now
this is an easy increment to saving some memory on the IO pool.
A few relatively obvious issues here:
* We cannot run the different IT runs (large blob setting one and normal integ run) concurrently
* We need to set the dependency tasks up correctly for the large blob run so that it works in isolation
* We can't use the `localAddress` for the location header of the resumable upload
(this breaks in YAML tests because GCS is using a loopback port forward for the initial request and the
local address will be chosen as the actual Docker container host)
Closes#57026
Merging logic is currently split between FieldMapper, with its merge() method, and
MappedFieldType, which checks for merging compatibility. The compatibility checks
are called from a third class, MappingMergeValidator. This makes it difficult to reason
about what is or is not compatible in updates, and even what is in fact updateable - we
have a number of tests that check compatibility on changes in mapping configuration
that are not in fact possible.
This commit refactors the compatibility logic so that it all sits on FieldMapper, and
makes it called at merge time. It adds a new FieldMapperTestCase base class that
FieldMapper tests can extend, and moves the compatibility testing machinery from
FieldTypeTestCase to here.
Relates to #56814
Adds tracking for the API calls performed by the Azure Storage
underlying SDK. It relies on the ability to hook a request
listener into the OperationContext.
Backport of #56773
Elasticsearch requires that a HttpRequest abstraction be implemented
by http modules before server processing. This abstraction controls when
underlying resources are released. This commit moves this abstraction to
be created immediately after content aggregation. This change will
enable follow-up work including moving Cors logic into the server
package and tracking bytes as they are aggregated from the network
level.
Add tracking for regular and multipart uploads.
Regular uploads are categorized as PUT.
Multi part uploads are categorized as POST.
The number of documents created for the test #testRequestStats
have been increased so all upload methods are exercised.
Backport of #56826
Add tracking for multipart and resumable uploads for GoogleCloudStorage.
For resumable uploads only the last request is taken into account for
billing, so that's the only request that's tracked.
Backport of #56821
Fixes the fact that repository metadata with the same settings still results in
multiple settings instances being cached as well as leaking settings on closing
a repository.
Closes#56702
In most cases we are seeing a `PooledHeapByteBuf` here now. No need to
redundantly create an new `ByteBuffer` and single element array for it
here when we can just directly unwrap its internal `byte[]`.
This change aims to fix our setup in CI so that we can run 7.x in
FIPS 140 mode. The major issue that we have in 7.x and did not
have in master is that we can't use the diagnostic trust manager
in FIPS mode in Java 8 with SunJSSE in FIPS approved mode as it
explicitly disallows the wrapping of X509TrustManager.
Previous attempts like #56427 and #52211 focused on disabling the
setting in all of our tests when creating a Settings object or
on setting fips_mode.enabled accordingly (which implicitly disables
the diagnostic trust manager). The attempts weren't future proof
though as nothing would forbid someone to add new tests without
setting the necessary setting and forcing this would be very
inconvenient for any other case ( see
#56427 (comment) for the full argumentation).
This change introduces a runtime check in SSLService that overrides
the configuration value of xpack.security.ssl.diagnose.trust and
disables the diagnostic trust manager when we are running in Java 8
and the SunJSSE provider is set in FIPS mode.
Mapper.Builder currently has some complex generics on it to allow fluent builder
construction. However, the second parameter, a return type from the build() method,
is unnecessary, as we can use covariant return types. This commit removes this second
generic parameter.
This is another part of the breakup of the massive BuildPlugin. This PR
moves the code for configuring publications to a separate plugin. Most
of the time these publications are jar files, but this also supports the
zip publication we have for integ tests.
We never do any file IO or other blocking work on the transport threads
so no tangible benefit can be derived from using more threads than CPUs
for IO.
There are however significant downsides to using more threads than necessary
with Netty in particular. Since we use the default setting for
`io.netty.allocator.useCacheForAllThreads` which is `true` we end up
using up to `16MB` of thread local buffer cache for each transport thread.
Meaning we potentially waste CPUs * 16MB of heap for unnecessary IO threads in addition to obvious inefficiencies of artificially adding extra context switches.
Backporting #56585 to 7.x branch.
Adds tracking for the API calls performed by the GoogleCloudStorage
underlying SDK. It hooks an HttpResponseInterceptor to the SDK
transport layer and does http request filtering based on the URI
paths that we are interested to track. Unfortunately we cannot hook
a wrapper into the ServiceRPC interface since we're using different
levels of abstraction to implement retries during reads
(GoogleCloudStorageRetryingInputStream).
This merges the code for the `significant_terms` agg into the package
for the code for the `terms` agg. They are *super* entangled already,
this mostly just admits that to ourselves.
Precondition for the terms work in #56487
Two spots that allow for some optimization:
* We are often creating a composite reference of just a single item in
the transport layer => special cased via static constructor to make sure we never do that
* Also removed the pointless case of an empty composite bytes ref
* `ByteBufferReference` is practically always created from a heap buffer these days so there
is no point of dealing with all the bounds checks and extra references to sliced buffers from that
and we can just use the underlying array directly
A recent AWS SDK upgrade has introduced a new source of spurious `WARN` logs
when the security manager prevents access to the user's home directory and
therefore to their shared client configuration. This is actually the behaviour
we want, and it's harmless and handled by the SDK as if the profile config
doesn't exist, so this log message is unnecessary noise. This commit suppresses
this noisy logging by default.
Relates #20313Closes#56333
Moving from `5s` to `10s` here because of #56095.
This adds `10s` to the overall runtime of the test which should be
a reasonable tradeoff for stability.
Closes#56095
Another Jackson release is available. There are some CVEs addressed,
none of which impact us, but since we can now bump Jackson easily, let
us move along with the train to avoid the false positives from security
scanners.
`FieldMapper#parseCreateField` accepts the parse context, plus a list of fields
as an output parameter. These fields are immediately added to the document
through `ParseContext#doc()`.
This commit simplifies the signature by removing the list of fields, and having
the mappers add the fields directly to `ParseContext#doc()`. I think this is
nicer for implementors, because previously fields could be added either through
the list, or the context (through `add`, `addWithKey`, etc.)
* Allow Deleting Multiple Snapshots at Once (#55474)
Adds deleting multiple snapshots in one go without significantly changing the mechanics of snapshot deletes otherwise.
This change does not yet allow mixing snapshot delete and abort. Abort is still only allowed for a single snapshot delete by exact name.
Currently there is a clear mechanism to stub sending a request through
the transport. However, this is limited to testing exceptions on the
sender side. This commit reworks our transport related testing
infrastructure to allow stubbing request handling on the receiving side.
Backport of #55115.
Replace calls to deprecate(String,Object...) with deprecateAndMaybeLog(...),
with an appropriate key, so that all messages can potentially be deduplicated.
This change folds the removal of the in-progress snapshot entry
into setting the safe repository generation. Outside of removing
an unnecessary cluster state update, this also has the advantage
of removing a somewhat inconsistent cluster state where the safe
repository generation points at `RepositoryData` that contains a
finished snapshot while it is still in-progress in the cluster
state, making it easier to reason about the state machine of
upcoming concurrent snapshot operations.
To read from GCS repositories we're currently using Google SDK's official BlobReadChannel,
which issues a new request every 2MB (default chunk size for BlobReadChannel) using range
requests, and fully downloads the chunk before exposing it to the returned InputStream. This
means that the SDK issues an awfully high number of requests to download large blobs.
Increasing the chunk size is not an option, as that will mean that an awfully high amount of
heap memory will be consumed by the download process.
The Google SDK does not provide the right abstractions for a streaming download. This PR
uses the lower-level primitives of the SDK to implement a streaming download, similar to what
S3's SDK does.
Also closes#55505
Adds ranged read support for GCS repositories in order to enable searchable snapshot support
for GCS.
As part of this PR, I've extracted some of the test infrastructure to make sure that
GoogleCloudStorageBlobContainerRetriesTests and S3BlobContainerRetriesTests are covering
similar test (as I saw those diverging in what they cover)
* Fix Path Style Access Setting Priority
Fixing obvious bug in handling path style access if it's the only setting overridden by the
repository settings.
Closes#55407
* Fix security manager bug writing large blobs to GCS
This commit addresses a security manager permissions issue writing large
blobs (on the resumable upload path) to GCS. The underlying issue here
is that we need to wrap the close and write calls on the channel. It is
not enough to do this:
SocketAccess.doPrivilegedVoidIOException(
() -> Streams.copy(
inputStream,
Channels.newOutputStream(client().writer(blobInfo, writeOptions))));
This reason that this is not enough is because Streams#copy will be in
the stacktrace and it is not granted the security manager permissions
needed to close or write this channel. We only grant those permissions
to classes loaded in the plugin classloader, and Streams#copy is from
the parent classloader. This is why we must wrap the close and write
calls as privileged, to truncate the Streams#copy call out of the
stacktrace.
The reason that this issue is not caught in testing is because the size
of data that we use in testing is too small to trigger the large blob
resumable upload path. Therefore, we address this by adding a system
property to control the threshold, which we can then set in tests to
exercise this code path. Prior to rewriting the writeBlobResumable
method to wrap the close and write calls as privileged, with this
additional test, we are able to reproduce the security manager
permissions issue. After adding the wrapping, this test now passes.
* Fix forbidden APIs issue
* Remove leftover debugging
We believe there's no longer a need to be able to disable basic-license
features completely using the "xpack.*.enabled" settings. If users don't
want to use those features, they simply don't need to use them. Having
such features always available lets us build more complex features that
assume basic-license features are present.
This commit deprecates settings of the form "xpack.*.enabled" for
basic-license features, excluding "security", which is a special case.
It also removes deprecated settings from integration tests and unit
tests where they're not directly relevant; e.g. monitoring and ILM are
no longer disabled in many integration tests.
I've noticed that a lot of our tests are using deprecated static methods
from the Hamcrest matchers. While this is not a big deal in any
objective sense, it seems like a small good thing to reduce compilation
warnings and be ready for a new release of the matcher library if we
need to upgrade. I've also switched a few other methods in tests that
have drop-in replacements.
Currently forbidden apis accounts for 800+ tasks in the build. These
tasks are aggressively created by the plugin. In forbidden apis 3.0, we
will get task avoidance
(https://github.com/policeman-tools/forbidden-apis/pull/162), but we
need to ourselves use the same task avoidance mechanisms to not trigger
these task creations. This commit does that for our foribdden apis
usages, in preparation for upgrading to 3.0 when it is released.
Upgrade to lucene 8.5.1 release that contains a bug fix for a bug that might introduce index corruption when deleting data from an index that was previously shrunk.
We can be a little more efficient when aborting a snapshot. Since we know the new repository
data after finalizing the aborted snapshot when can pass it down to the snapshot completion listeners.
This way, we don't have to fork off to the snapshot threadpool to get the repository data when the listener completes and can directly submit the delete task with high priority straight from the cluster state thread.
Provides basic repository-level stats that will allow us to get some insight into how many
requests are actually being made by the underlying SDK. Currently only tracks GET and LIST
calls for S3 repositories. Most of the code is unfortunately boiler plate to add a new endpoint
that will help us better understand some of the low-level dynamics of searchable snapshots.
This change converts the module and plugin parameters
for testClusters to be lazy. Meaning that the values
are not resolved until they are actually used. This
removes the requirement to use project.afterEvaluate to
be able to resolve the bundle artifact.
Note - this does not completely remove the need for afterEvaluate
since it is still needed for the custom resource extension.
The use of available processors, the terminology, and the settings
around it have evolved over time. This commit cleans up some places in
the codes and in the docs to adjust to the current terminology.
The ranges in HTTP headers are using inclusive values for start and end of the range.
The math we used was off in so far that start equals end for the range resulted in length `0`
instead of the correct value of `1`.
Closes#54981Closes#54995
Guava was removed from Elasticsearch many years ago, but remnants of it
remain due to transitive dependencies. When a dependency pulls guava
into the compile classpath, devs can inadvertently begin using methods
from guava without realizing it. This commit moves guava to a runtime
dependency in the modules that it is needed.
Note that one special case is the html sanitizer in watcher. The third
party dep uses guava in the PolicyFactory class signature. However, only
calling a method on the PolicyFactory actually causes the class to be
loaded, a reference alone does not trigger compilation to look at the
class implementation. There we utilize a MethodHandle for invoking the
relevant method at runtime, where guava will continue to exist.
This commit moves the action name validation and circuit breaking into
the InboundAggregator. This work is valuable because it lays the
groundwork for incrementally circuit breaking as data is received.
This PR includes the follow behavioral change:
Handshakes contribute to circuit breaking, but cannot be broken. They
currently do not contribute nor are they broken.
This is a backport of #54803 for 7.x.
This pull request cherry picks the squashed commit from #54803 with the additional commits:
6f50c92 which adjusts master code to 7.x
a114549 to mute a failing ILM test (#54818)
48cbca1 and 50186b2 that cleans up and fixes the previous test
aae12bb that adds a missing feature flag (#54861)
6f330e3 that adds missing serialization bits (#54864)
bf72c02 that adjust the version in YAML tests
a51955f that adds some plumbing for the transport client used in integration tests
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Co-authored-by: Lee Hinman <dakrone@users.noreply.github.com>
Co-authored-by: Andrei Dan <andrei.dan@elastic.co>
This commit updates the link to the JDK 14 compiler bug that we have
found. At the time that we committed the workaround, we had a submission
ID, but not yet the public bug URL. This commit adds the public bug URL.
This commit workarounds a bug in the JDK 14 compiler. It is choking on a
method reference, so we substitute a lambda expression instead. The JDK
bug ID is 9064309.
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
* Comprehensively test supported/unsupported field type:agg combinations (#52493)
This adds a test to AggregatorTestCase that allows us to programmatically
verify that an aggregator supports or does not support a particular
field type. It fetches the list of registered field type parsers,
creates a MappedFieldType from the parser and then attempts to run
a basic agg against the field.
A supplied list of supported VSTypes are then compared against the
output (success or exception) and suceeds or fails the test accordingly.
Co-Authored-By: Mark Tozzi <mark.tozzi@gmail.com>
* Skip fields that are not aggregatable
* Use newIndexSearcher() to avoid incompatible readers (#52723)
Lucene's `newSearcher()` can generate readers like ParallelCompositeReader
which we can't use. We need to instead use our helper `newIndexSearcher`
Backport of #53982
In order to prepare the `AliasOrIndex` abstraction for the introduction of data streams,
the abstraction needs to be made more flexible, because currently it really can be only
an alias or an index.
* Renamed `AliasOrIndex` to `IndexAbstraction`.
* Introduced a `IndexAbstraction.Type` enum to indicate what a `IndexAbstraction` instance is.
* Replaced the `isAlias()` method that returns a boolean with the `getType()` method that returns the new Type enum.
* Moved `getWriteIndex()` up from the `IndexAbstraction.Alias` to the `IndexAbstraction` interface.
* Moved `getAliasName()` up from the `IndexAbstraction.Alias` to the `IndexAbstraction` interface and renamed it to `getName()`.
* Removed unnecessary casting to `IndexAbstraction.Alias` by just checking the `getType()` method.
Relates to #53100
Currently all of our transport protocol decoding and aggregation occurs
in the individual transport modules. This means that each implementation
(test, netty, nio) must implement this logic. Additionally, it means
that the entire message has been read from the network before the server
package receives it.
This commit creates a pipeline in server which can be passed arbitrary
bytes to handle. Internally, the pipeline will decode, decompress, and
aggregate the messages. Additionally, this allows us to run many
megabytes of bytes through the pipeline in tests to ensure that the
logic works.
This work will enable future work:
Circuit breaking or backoff logic based on message type and byte
in the content aggregator.
Sharing bytes with the application layer using the ref counted
releasable network bytes.
Improved network monitoring based specifically on channels.
Finally, this fixes the bug where we do not circuit break on the correct
message size when compression is enabled.
Elasticsearch has a number of different BytesReference implementations.
These implementations can all implement the interface in different ways
with subtly different behavior and performance characteristics. On the
other-hand, the JVM only represents bytes as an array or a direct byte
buffer. This commit deletes the specialized Netty implementations and
moves to using a generic ByteBuffer reference type. This will allow us
to focus on standardizing performance and behave around a smaller number
of implementations that can be used by all components in Elasticsearch.
We are not using the Apache HTTP client backed http transport
with the GCS repo. Same as with the app engine type transport
we can save ourselves the dependency on the http client here
and ignore the missing classes.
* Upgrade GCS Dependency to 1.106.0 (#54092)
Upgrading GCS Dep + related dependencies as it seems some more retry bugs were fixed between .104 and .106
This reverts commit 23cccf088810b8416ed278571352393cc2de9523.
Unfortunately SAS token auth still doesn't work with bulk deletes so we can't use them yet.
Closes#54080
This commit removes the configuration time vs execution time distinction
with regards to certain BuildParms properties. Because of the cost of
determining Java versions for configuration JDK locations we deferred
this until execution time. This had two main downsides. First, we had
to implement all this build logic in tasks, which required a bunch of
additional plumbing and complexity. Second, because some information
wasn't known during configuration time, we had to nest any build logic
that depended on this in awkward callbacks.
We now defer to the JavaInstallationRegistry recently added in Gradle.
This utility uses a much more efficient method for probing Java
installations vs our jrunscript implementation. This, combined with some
optimizations to avoid probing the current JVM as well as deferring
some evaluation via Providers when probing installations for BWC builds
we can maintain effectively the same configuration time performance
while removing a bunch of complexity and runtime cost (snapshotting
inputs for the GenerateGlobalBuildInfoTask was very expensive). The end
result should be a much more responsive build execution in almost all
scenarios.
(cherry picked from commit ecdbd37f2e0f0447ed574b306adb64c19adc3ce1)
This change adds the `nori_number` token filter.
It also adds a `discard_punctuation` option in nori_tokenizer that should be used in conjunction with the new filter.
Upgrading AWS SDK to v1.11.749.
Required building clients inside privileged contexts because some class loading that requires privileges now happens there and working around a new SDK bug in the S3 client builder.
Closes#53191
Upgrading to 8.6.2 in #53865 broke running against HTTPs endpoints (and hence real azure)
because the https url connection needs the newly added permission to work.
The lower end of the timeout range of 100ms is prone to time out
on CI before the mock REST server gets to sending a response that
is not supposed to be a timeout.
Using 1-3s here should make this safe at the cost of randomly making
this test take a few seconds.
Closes#53506
Re-applies the change from #53523 along with test fixes.
closes#53626closes#53624closes#53622closes#53625
Co-authored-by: Nik Everett <nik9000@gmail.com>
Co-authored-by: Lee Hinman <dakrone@users.noreply.github.com>
Co-authored-by: Jake Landis <jake.landis@elastic.co>
This commit upgrades the jackson-databind depdendency to
2.8.11.6. Additionally, we revert a previous change that put
ingest-geoip on the version of jackson-databind from the version
properties file. This is because upgrading ingest-geoip to a later
version of jackson-databind also requires an upgrade to the geoip2
dependency which is currently blocked. Therefore, if we can get to a
point where we otherwise upgrade our Jackson dependencies, we do not
want ingest-geoip to automatically come along with it.
Lucene 8.5.0 release candidates are imminent. This commit upgrades master to use
the latest snapshot to check that there are no last-minute bugs or regressions.
Upgrading the GCS SDK to the most recent version.
Adjusting (i.e. improving) the REST mock accordingly.
This should significantly boost performance by pulling in
https://github.com/googleapis/java-core/issues/86 in some cases.
Tests in GoogleCloudStorageBlobStoreRepositoryTests are known
to be flaky on JDK 8 (#51446, #52430 ) and we suspect a JDK
bug (https://bugs.openjdk.java.net/browse/JDK-8180754) that triggers
some assertion on the server side logic that emulates the Google
Cloud Storage service.
Sadly we were not able to reproduce the failures, even when using
the same OS (Debian 9, Ubuntu 16.04) and JDK (Oracle Corporation
1.8.0_241 [Java HotSpot(TM) 64-Bit Server VM 25.241-b07]) of
almost all the test failures on CI. While we spent some time fixing
code (#51933, #52431) to circumvent the JDK bug they are still flaky
on JDK-8. This commit mute these tests for JDK-8 only.
Close ##52906
The countdown didn't work well here because it only returns `true` once the countdown reaches `0`
but can on subsequent executions return `false` again if a countdown at `0` is counted down again,
leading to more than the expected number of simulated failures.
Closes#52607
Cache latest `RepositoryData` on heap when it's absolutely safe to do so (i.e. when the repository is in strictly consistent mode).
`RepositoryData` can safely be assumed to not grow to a size that would cause trouble because we often have at least two copies of it loaded at the same time when doing repository operations. Also, concurrent snapshot API status requests currently load it independently of each other and so on, making it safe to cache on heap and assume as "small" IMO.
The benefits of this move are:
* Much faster repository status API calls
* listing all snapshot names becomes instant
* Other operations are sped up massively too because they mostly operate in two steps: load repository data then load multiple other blobs to get the additional data
* Additional cloud cost savings
* Better resiliency, saving another spot where an IO issue could break the snapshot
* We can simplify a number of spots in the current code that currently pass around the repository data in tricky ways to avoid loading it multiple times in follow ups.
* Refactor Inflexible Snapshot Repository BwC (#52365)
Transport the version to use for a snapshot instead of whether to use shard generations in the snapshots in progress entry. This allows making upcoming repository metadata changes in a flexible manner in an analogous way to how we handle serialization BwC elsewhere.
Also, exposing the version at the repository API level will make it easier to do BwC relevant changes in derived repositories like source only or encrypted.
* Add Blob Download Retries to GCS Repository
Exactly as #46589 (and kept as close to it as possible code wise so we can dry things up in a follow-up potentially) but for GCS.
Closes#52319
Francisco Fernández Castaño
Armin Braun
Rene Groeschke
markharwood
Alan Woodward
Tim Brooks
Ioannis Kakavas
Ryan Ernst
Mark Vieira
Mark Tozzi
Nik Everett
Ignacio Vera
David Turner
Jason Tedor
Julie Tibshirani
Rory Hunter
Yannick Welsch
William Brafford
Jake Landis
Tanguy Leroux
Zachary Tong
Martijn van Groningen
James Baiera
Alan Woodward
Namgyu Kim
Nhat Nguyen
Lee Hinman