Restoring from a snapshot (which is a particular form of recovery) does not currently take recovery throttling into account
(i.e. the `indices.recovery.max_bytes_per_sec` setting). While restores are subject to their own throttling (repository
setting `max_restore_bytes_per_sec`), this repository setting does not allow for values to be configured differently on a
per-node basis. As restores are very similar in nature to peer recoveries (streaming bytes to the node), it makes sense to
configure throttling in a single place.
The `max_restore_bytes_per_sec` setting is also changed to default to unlimited now, whereas previously it was set to
`40mb`, which is the current default of `indices.recovery.max_bytes_per_sec`). This means that no behavioral change
will be observed by clusters where the recovery and restore settings were not adapted.
Relates https://github.com/elastic/elasticsearch/issues/57023
Co-authored-by: James Rodewig <james.rodewig@elastic.co>
Today the disk-based shard allocator accounts for incoming shards by
subtracting the estimated size of the incoming shard from the free space on the
node. This is an overly conservative estimate if the incoming shard has almost
finished its recovery since in that case it is already consuming most of the
disk space it needs.
This change adds to the shard stats a measure of how much larger each store is
expected to grow, computed from the ongoing recovery, and uses this to account
for the disk usage of incoming shards more accurately.
Backport of #58029 to 7.x
* Picky picky
* Missing type
* Detangle JdkJarHellCheck from build tool building
- allows building the tool with same runtime as es
- allows building build tools with newer runtime version and keep ThirdPartyAuditTask
running with minimum runtime to ensure we check against correct jre
- add jdkjarhell test jar setup into fixture
SAML idP sends back a LogoutResponse at the end of the logout workflow. It can be sent via either HTTP-Redirect binding or HTTP-POST binding. Currently, the HTTP-Redirect request is simply ignored by Kibana and never reaches ES. It does not cause any obvious issue and the workflow is completed normally from user's perspective.
The HTTP-POST request results in a 404 error because POST request is not accepted by Kibana's logout end-point. This causes a non-trivial issue because it renders an error page in user's browser. In addition, some resources do not seem to be fully cleaned up due to the error, e.g. the username will be pre-filled when trying to login again after the 404 error.
This PR solves both of the above issues from ES side with a new /_security/saml/complete_logout end-point. Changes are still needed on Kibana side to relay the messages.
Adds an explicit check to `variable_width_histogram` to stop it from
trying to collect from many buckets because it can't. I tried to make it
do so but that is more than an afternoon's project, sadly. So for now we
just disallow it.
Relates to #42035
Backport of #58419
Mapping updates that originate from indexing a document with unmapped fields will use this new action
instead of the current put mapping action. This way on the security side, authorization logic
can easily determine whether a mapping update is automatically generated or a mapping update originates
from the put mapping api.
The new auto put mapping action is only used if all nodes are on the version that supports it.
This PR implements recursive mapping merging for composable index templates.
When creating an index, we perform the following:
* Add each component template mapping in order, merging each one in after the
last.
* Merge in the index template mappings (if present).
* Merge in the mappings on the index request itself (if present).
Some principles:
* All 'structural' changes are disallowed (but everything else is fine). An
object mapper can never be changed between `type: object` and `type: nested`. A
field mapper can never be changed to an object mapper, and vice versa.
* Generally, each section is merged recursively. This includes `object`
mappings, as well as root options like `dynamic_templates` and `meta`. Once we
reach 'leaf components' like field definitions, they always overwrite an
existing one instead of being merged.
Relates to #53101.
When per_partition_categorization.stop_on_warn is set for an analysis
config it is now passed through to the autodetect C++ process.
Also adds some end-to-end tests that exercise the functionality
added in elastic/ml-cpp#1356
Backport of #58632
* Replace compile configuration usage with api (#58451)
- Use java-library instead of plugin to allow api configuration usage
- Remove explicit references to runtime configurations in dependency declarations
- Make test runtime classpath input for testing convention
- required as java library will by default not have build jar file
- jar file is now explicit input of the task and gradle will ensure its properly build
* Fix compile usages in 7.x branch
In the unlikely corner case of deleting a relocation (hence `WAITING`) primary shard's
index during a partial snapshot, we would throw an NPE when checking if there's any external
changes to process.
This commit adds conditional logic to the docs to avoid including any
docs on searchable snapshots in released versions.
Rework of #58556 which was reverted.
Adds an API for putting an index block in place, which also ensures for write blocks that, once successfully returning to
the user, all shards of the index are properly accounting for the block, for example that all in-flight writes to an index have
been completed after adding the write block.
This API allows coordinating more complex workflows, where it is crucial that an index is no longer receiving writes after
the API completes, useful for example when marking an index as read-only during an upgrade in order to reindex its
documents.
RandomZone test method returns a ZoneId from the set of ids supported by
java. The only difference between joda and java supported timezones are
SystemV* timezones.
These should be excluded from randomZone method as they would break
testing. They also do not bring much confidence when used in testing as
I suspect they are rarely used.
That exclude should be removed for simplification once joda support is removed.
This commit adds the BuildParams.testSeed to the repository base paths used
in searchable snapshots QA tests. For S3 and GCS the test seed is added for
coherency sake with other integration tests while it's required for Azure as
Azure 3rd party tests are executed on CI simultaneously for regular and
SAS token accounts.
Closes#58260
The GET /_license endpoint displays "enterprise" licenses as
"platinum" by default so that old clients (including beats, kibana and
logstash) know to interpret this new license type as if it were a
platinum license.
However, this compatibility layer was not applied to the GET /_xpack/
endpoint which also displays a license type & mode.
This commit causes the _xpack API to mimic the _license API and treat
enterprise as platinum by default, with a new accept_enterprise
parameter that will cause the API to return the correct "enterprise"
value.
This BWC layer exists only for the 7.x branch.
This is a breaking change because, since 7.6, the _xpack API has
returned "enterprise" for enterprise licenses, but this has been found
to break old versions of beats and logstash so needs to be corrected.
When a packaging test completes, we move the elasticsearch logfile to
another location so that if the next test fails, we have just the
contents of the test that ran. However, once the test fails, we continue
trying to move this file in the subsequent calls to teardown when the
rest of the tests are skipped. This commit skips the teardown step once
we have marked the suite as failed.
Previously we had odd issues in CI with vagrant which we attempted to
diagnose by enabling debug logging within our vagrant commands. However,
the debug logging didn't explain anything additional to the failures,
and it is extremely verbose. This commit removes the debug logging.
* Adding create index snapshot API page.
* Condense API description.
* Remove parameter from query.
* Add POST method and remove `-name` from the snapshot variable.
* Expand description of `<snapshot>`.
* Add data streams to introduction and expand the overall description.
* Add support for data streams.
* Add support for data streams.
* Add data stream and reference for "point-in-time view".
* Add data streams.
* Change `my_backup` to `my_repository`.
* Add description of boolean options for `wait_for_completion` parameter.
* Change command --> response
* Clarify `indices` parameter description
* Update `ignore-unavailable` parameter description
* Reword example description
* Remove "index" from API name
* Incorporating review comments from James R.
* Adding a much better request + response
* Clarify `include_global_state` description
* Incorporating additional edits.
* Changing my_backup to my_repository in example.
* Update snippet test to avoid failures
* Update TESTRESPONSE snippets
* Remove errant space
* Removing the parameter per reviewer comments
Yannick Welsch
Russ Cam
David Turner
David Kyle
Rene Groeschke
Dario Gieselaar
Yang Wang
Mark Vieira
Tim Vernum
Lee Hinman
Dan Hermann
Nik Everett
James Rodewig
Benjamin Trent
Martijn van Groningen
Boice Huang
Julie Tibshirani
David Roberts
Armin Braun
Alan Woodward
Przemysław Witek
Przemyslaw Gomulka
Andrei Stefan
Tanguy Leroux
Ryan Ernst
Adam Locke