hamcrest has some improvements in newer versions, like FileMatchers
that make assertions regarding file exists cleaner. This commit upgrades
to the latest version of hamcrest so we can start using new and improved
matchers.
X-Pack security supports built-in authentication service
`token-service` that allows access tokens to be used to
access Elasticsearch without using Basic authentication.
The tokens are generated by `token-service` based on
OAuth2 spec. The access token is a short-lived token
(defaults to 20m) and refresh token with a lifetime of 24 hours,
making them unsuitable for long-lived or recurring tasks where
the system might go offline thereby failing refresh of tokens.
This commit introduces a built-in authentication service
`api-key-service` that adds support for long-lived tokens aka API
keys to access Elasticsearch. The `api-key-service` is consulted
after `token-service` in the authentication chain. By default,
if TLS is enabled then `api-key-service` is also enabled.
The service can be disabled using the configuration setting.
The API keys:-
- by default do not have an expiration but expiration can be
configured where the API keys need to be expired after a
certain amount of time.
- when generated will keep authentication information of the user that
generated them.
- can be defined with a role describing the privileges for accessing
Elasticsearch and will be limited by the role of the user that
generated them
- can be invalidated via invalidation API
- information can be retrieved via a get API
- that have been expired or invalidated will be retained for 1 week
before being deleted. The expired API keys remover task handles this.
Following are the API key management APIs:-
1. Create API Key - `PUT/POST /_security/api_key`
2. Get API key(s) - `GET /_security/api_key`
3. Invalidate API Key(s) `DELETE /_security/api_key`
The API keys can be used to access Elasticsearch using `Authorization`
header, where the auth scheme is `ApiKey` and the credentials, is the
base64 encoding of API key Id and API key separated by a colon.
Example:-
```
curl -H "Authorization: ApiKey YXBpLWtleS1pZDphcGkta2V5" http://localhost:9200/_cluster/health
```
Closes#34383
We inject an Unfollow action before Shrink because the Shrink action
cannot be safely used on a following index, as it may not be fully
caught up with the leader index before the "original" following index is
deleted and replaced with a non-following Shrunken index. The Unfollow
action will verify that 1) the index is marked as "complete", and 2) all
operations up to this point have been replicated from the leader to the
follower before explicitly disconnecting the follower from the leader.
Injecting an Unfollow action before the Rollover action is done mainly
as a convenience: This allow users to use the same lifecycle policy on
both the leader and follower cluster without having to explictly modify
the policy to unfollow the index, while doing what we expect users to
want in most cases.
This commit removes the fallback for SSL settings. While this may be
seen as a non user friendly change, the intention behind this change
is to simplify the reasoning needed to understand what is actually
being used for a given SSL configuration. Each configuration now needs
to be explicitly specified as there is no global configuration or
fallback to some other configuration.
Closes#29797
The query object was incorrectly added to the remote object in the
xcontent. This fix moves the query back into the source, if it was
passed in as part of the RemoteInfo. It also adds a IPv6 test for
reindex from remote such that we can properly validate this.
Replace xpack.security.transport.ssl.truststore.password deprecated
setting with xpack.security.transport.ssl.truststore.secure_password
in the HLRC integTestCluster.
* Replace deprecated field `code` with `source` for stored scripts (#25127)
* Replace examples using the deprecated endpoint `{index}/{type}/_search`
with `{index}/_search` (#29468)
* Use a system property to avoid deprecation warnings after the Update
Scripts have been moved to their own context (#32096)
This commit adds a security client to the high level rest client, which
includes an implementation for the put user api. As part of these
changes, a new request and response class have been added that are
specific to the high level rest client. One change here is that the response
was previously wrapped inside a user object. The plan is to remove this
wrapping and this PR adds an unwrapped response outside of the user
object so we can remove the user object later on.
See #29827
This reworks how we configure the `shadow` plugin in the build. The major
change is that we no longer bundle dependencies in the `compile` configuration,
instead we bundle dependencies in the new `bundle` configuration. This feels
more right because it is a little more "opt in" rather than "opt out" and the
name of the `bundle` configuration is a little more obvious.
As an neat side effect of this, the `runtimeElements` configuration used when
one project depends on another now contains exactly the dependencies needed
to run the project so you no longer need to reference projects that use the
shadow plugin like this:
```
testCompile project(path: ':client:rest-high-level', configuration: 'shadow')
```
You can instead use the much more normal:
```
testCompile "org.elasticsearch.client:elasticsearch-rest-high-level-client:${version}"
```
This commit adds back the publishing section that sets the artifact id
of the generated pom file for the high level rest client. This was
accidentally removed during a consolidationo of the shadow plugin logic.
Relates #29827
This implementation behaves like the current transport client, that you basically cannot configure a Watch POJO representation as an argument to the put watch API, but only a bytes reference. You can use the the `WatchSourceBuilder` from the `org.elasticsearch.plugin:x-pack-core` dependency to build watches.
This commit also changes the license type to trial, so that watcher is available in high level rest client tests.
/cc @hub-cap
Moves the customizations to the build to produce nice shadow jars and
javadocs into common build code, mostly BuildPlugin with a little into
the root build.gradle file. This means that any project that applies the
shadow plugin will automatically be set up just like the high level rest
client:
* The non-shadow jar will not be built
* The shadow jar will not have a "classifier"
* Tests will run against the shadow jar
* Javadoc will include all of the shadowed classes
* Service files in `META-INF/services` will be merged
We have been encountering name mismatches between API defined in our
REST spec and method names that have been added to the high-level REST
client. We should check this automatically to prevent furher mismatches,
and correct all the current ones.
This commit adds a test for this and corrects the issues found by it.
The `:x-pack:protocol` project is an implementation detail shared by the
xpack projects and the high level rest client and really doesn't deserve
its own maven coordinants and published javadoc. This change bundles
`:x-pack:protocol` into the high level rest client.
Relates to #29827
This is the first x-pack API we're adding to the high level REST client
so there is a lot to talk about here!
= Open source
The *client* for these APIs is open source. We're taking the previously
Elastic licensed files used for the `Request` and `Response` objects and
relicensing them under the Apache 2 license.
The implementation of these features is staying under the Elastic
license. This lines up with how the rest of the Elasticsearch language
clients work.
= Location of the new files
We're moving all of the `Request` and `Response` objects that we're
relicensing to the `x-pack/protocol` directory. We're adding a copy of
the Apache 2 license to the root fo the `x-pack/protocol` directory to
line up with the language in the root `LICENSE.txt` file. All files in
this directory will have the Apache 2 license header as well. We don't
want there to be any confusion. Even though the files are under the
`x-pack` directory, they are Apache 2 licensed.
We chose this particular directory layout because it keeps the X-Pack
stuff together and easier to think about.
= Location of the API in the REST client
We've been following the layout of the rest-api-spec files for other
APIs and we plan to do this for the X-Pack APIs with one exception:
we're dropping the `xpack` from the name of most of the APIs. So
`xpack.graph.explore` will become `graph().explore()` and
`xpack.license.get` will become `license().get()`.
`xpack.info` and `xpack.usage` are special here though because they
don't belong to any proper category. For now I'm just calling
`xpack.info` `xPackInfo()` and intend to call usage `xPackUsage` though
I'm not convinced that this is the final name for them. But it does get
us started.
= Jars, jars everywhere!
This change makes the `xpack:protocol` project a `compile` scoped
dependency of the `x-pack:plugin:core` and `client:rest-high-level`
projects. I intend to keep it a compile scoped dependency of
`x-pack:plugin:core` but I intend to bundle the contents of the protocol
jar into the `client:rest-high-level` jar in a follow up. This change
has grown large enough at this point.
In that followup I'll address javadoc issues as well.
= Breaking-Java
This breaks that transport client by a few classes around. We've
traditionally been ok with doing this to the transport client.
It's easy to create a wrong Content-Type header when converting a
XContentType to a Apache HTTP ContentType instance.
This commit the direct usages of ContentType.create() methods in favor of a Request.createContentType(XContentType) method that does the right thing.
Closes#26438
It was brought up that our current client artifacts have generic names like 'rest' that may cause conflicts with other artifacts.
This commit renames:
- rest -> elasticsearch-rest-client
- sniffer -> elasticsearch-rest-client-sniffer
- rest-high-level -> elasticsearch-rest-high-level-client
A couple of small changes are also preparing the high level client for its first release.
Closes#20248
This commit enforces the requirement of Content-Type for the REST layer and removes the deprecated methods in transport
requests and their usages.
While doing this, it turns out that there are many places where *Entity classes are used from the apache http client
libraries and many of these usages did not specify the content type. The methods that do not specify a content type
explicitly have been added to forbidden apis to prevent more of these from entering our code base.
Relates #19388
The RestHighLevelClient class takes as as an argument a low level client instance RestClient. The first method added is ping, which returns true if the call to HEAD / went ok and false if an IOException was thrown. Any other exception gets bubbled up.
There are two kinds of tests, a unit test (RestHighLevelClientTests) that verifies the interaction between high level and low level client, and an integration test (MainActionIT) which relies on an externally started es cluster to send requests to.
Mark Vieira
Ryan Ernst
Martijn van Groningen
Yogesh Gaikwad
Gordon Brown
Jay Modi
Michael Basnight
Armin Braun
Alpar Torok
Vladimir Dolzhenko
Tim Vernum
Ioannis Kakavas
lipsill
Ioannis Kakavas
Nik Everett
Alexander Reelsen
Luca Cavanna
Julie Tibshirani
Christoph Büscher
Tanguy Leroux
Jim Ferenczi
javanna