This change cleans up some methods in the CharArrays class from x-pack, which
includes the unification of char[] to utf8 and utf8 to char[] conversions that
intentionally do not use strings. There was previously an implementation in
x-pack and in the reloading of secure settings. The method from the reloading
of secure settings was adopted as it handled more scenarios related to the
backing byte and char buffers that were used to perform the conversions. The
cleaned up class is moved into libs/core to allow it to be used by requests
that will be migrated to the high level rest client.
Relates #32332
This removes custom Response classes that extend `AcknowledgedResponse` and do nothing, these classes are not needed and we can directly use the non-abstract super-class instead.
While this appears to be a large PR, no code has actually changed, only class names have been changed and entire classes removed.
We only upgrade the ID when the state is saved in one of four scenarios:
- when we reach a checkpoint (every 50 pages)
- when we run out of data
- when explicitly stopped
- on failure
The test was relying on the pre-upgrade to finish, save state and then
the post-upgrade to start, hit the end of data and upgrade ID. THEN
get the new doc and apply the new ID.
But I think this is vulnerable to timing issues. If the pre-upgrade
portion shutdown before it saved the state, when restarting we would run
through all the data from the beginning with the old ID, meaning both
docs would still have the old scheme.
This change makes the pre-upgrade wait for the job to go back to STARTED
so that we know it persisted the end point. Post-upgrade, it stops and
restarts the job to ensure the state was persisted and the ID upgraded.
That _should_ rule out the above timing issue.
Closes#32773
* Clear Job#finished_time when it is opened (#32605)
* not returning failure when Job#finished_time is not reset
* Changing error log string and source string
Skip the comparative tests using lowercasing/uppercasing against H2 (which considers the Locale).
ES-SQL is, so far, ignoring the Locale.
Still, the same queries are executed against ES-SQL alone and results asserted to be correct.
The Apache Http components support for Spnego scheme
uses canonical name by default.
Also when resolving host name, on centos by default
there are other aliases so adding them to the
DelegationPermission.
Closes#32498
Bumping down the version to 6.4 since the backport is complete. Also
adds some missing version checks to the bwc tests to make sure it
only runs on the correct versions
Previously, we were using a simple CRC32 for the IDs of rollup documents.
This is a very poor choice however, since 32bit IDs leads to collisions
between documents very quickly.
This commit moves Rollups over to a 128bit ID. The ID is a concatenation
of all the keys in the document (similar to the rolling CRC before),
hashed with 128bit Murmur3, then base64 encoded. Finally, the job
ID and a delimiter (`$`) are prepended to the ID.
This gurantees that there are 128bits per-job. 128bits should
essentially remove all chances of collisions, and the prepended
job ID means that _if_ there is a collision, it stays "within"
the job.
BWC notes:
We can only upgrade the ID scheme after we know there has been a good
checkpoint during indexing. We don't rely on a STARTED/STOPPED
status since we can't guarantee that resulted from a real checkpoint,
or other state. So we only upgrade the ID after we have reached
a checkpoint state during an active index run, and only after the
checkpoint has been confirmed.
Once a job has been upgraded and checkpointed, the version increments
and the new ID is used in the future. All new jobs use the
new ID from the start
These tests ensure, that the basic watch APIs are tested in the rolling
upgrade tests. After initially adding a watch, the tests try to get,
execute, deactivate and activate a watch. Watcher stats are tested as
well, and an own java based test has been added for restarting, as that
requires waiting for a state change. Watcher history is also checked.
Closes#31216
The User class has been moved to the protocol project for upcoming work
to add more security APIs to the high level rest client. As part of
this change, the toString method no longer uses a custom output method
from MetadataUtils and instead just relies on Java's toString
implementation.
Added support for string manipulating functions with more than one parameter:
CONCAT, LEFT, RIGHT, REPEAT, POSITION, LOCATE, REPLACE, SUBSTRING, INSERT
This change updates KerberosAuthenticationIT to resolve the host used
to connect to the test cluster. This is needed because the host could
be an IP address but SPNEGO requires a hostname to work properly. This
is done by adding a hook in ESRestTestCase for building the HttpHost
from the host and port.
Additionally, the project now specifies the IPv4 loopback address as
the http host. This is done because we need to be able to resolve the
address used for the HTTP transport before the node starts up, but the
http.ports file is not written until the node is started.
Closes#32498
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack:qa:rolling-upgrade*` projects to use
the new versions.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/qa/security-example-spi-extension`
project to use the new versions.
This commit avoids dependency during compile on copy keytab to
be present in the generated sources so pre-commit does not
stall for updating vagrant box.
Closes#32387
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack:qa:full-cluster-restart` project to use
the new versions.
This bundles the x-pack:protocol project into the x-pack:plugin:core
project because we'd like folks to consider it an implementation detail
of our build rather than a separate artifact to be managed and depended
on. It is now bundled into both x-pack:plugin:core and
client:rest-high-level. To make this work I had to fix a few things.
Firstly, I had to make PluginBuildPlugin work with the shadow plugin.
In that case we have to bundle only the `shadow` dependencies and the
shadow jar.
Secondly, every reference to x-pack:plugin:core has to use the `shadow`
configuration. Without that the reference is missing all of the
un-shadowed dependencies. I tried to make it so that applying the shadow
plugin automatically redefines the `default` configuration to mirror the
`shadow` configuration which would allow us to use bare project references
to the x-pack:plugin:core project but I couldn't make it work. It'd *look*
like it works but then fail for transitive dependencies anyway. I think
it is still a good thing to do but I don't have the willpower to do it
now.
Finally, I had to fix an issue where Eclipse and IntelliJ didn't properly
reference shadowed transitive dependencies. Neither IDE supports shadowing
natively so they have to reference the shadowed projects. We fix this by
detecting `shadow` dependencies when in "Intellij mode" or "Eclipse mode"
and adding `runtime` dependencies to the same target. This convinces
IntelliJ and Eclipse to play nice.
This commit adds support for Kerberos authentication with a platinum
license. Kerberos authentication support relies on SPNEGO, which is
triggered by challenging clients with a 401 response with the
`WWW-Authenticate: Negotiate` header. A SPNEGO client will then provide
a Kerberos ticket in the `Authorization` header. The tickets are
validated using Java's built-in GSS support. The JVM uses a vm wide
configuration for Kerberos, so there can be only one Kerberos realm.
This is enforced by a bootstrap check that also enforces the existence
of the keytab file.
In many cases a fallback authentication mechanism is needed when SPNEGO
authentication is not available. In order to support this, the
DefaultAuthenticationFailureHandler now takes a list of failure response
headers. For example, one realm can provide a
`WWW-Authenticate: Negotiate` header as its default and another could
provide `WWW-Authenticate: Basic` to indicate to the client that basic
authentication can be used in place of SPNEGO.
In order to test Kerberos, unit tests are run against an in-memory KDC
that is backed by an in-memory ldap server. A QA project has also been
added to test against an actual KDC, which is provided by the krb5kdc
fixture.
Closes#30243
* Complete changes for running IT in a fips JVM
- Mute :x-pack:qa:sql:security:ssl:integTest as it
cannot run in FIPS 140 JVM until the SQL CLI supports key/cert.
- Set default JVM keystore/truststore password in top level build
script for all integTest tasks in a FIPS 140 JVM
- Changed top level x-pack build script to use keys and certificates
for trust/key material when spinning up clusters for IT
The notion of "quality" is an overloaded term in the search ranking evaluation
context. Its usually used to decribe certain levels of "good" vs. "bad" of a
seach result with respect to the users information need. We currently report the
result of the ranking evaluation as `quality_level` which is a bit missleading.
This changes the response parameter name to `metric_score` which fits better.
* Remove BouncyCastle dependency from runtime
This commit introduces a new gradle project that contains
the classes that have a dependency on BouncyCastle. For
the default distribution, It builds a jar from those and
in puts it in a subdirectory of lib
(/tools/security-cli) along with the BouncyCastle jars.
This directory is then passed in the
ES_ADDITIONAL_CLASSPATH_DIRECTORIES of the CLI tools
that use these classes.
BouncyCastle is removed as a runtime dependency (remains
as a compileOnly one) from x-pack core and x-pack security.
Resolving wildcards in aliases expression is challenging as we may end
up with no aliases to replace the original expression with, but if we
replace with an empty array that means _all which is quite the opposite.
Now that we support and serialize the original requested aliases,
whenever aliases are replaced we will be able to know what was
initially requested. `MetaData#findAliases` can then be updated to not
return anything in case it gets empty aliases, but the original aliases
were not empty. That means that empty aliases are interpreted as _all
only if they were originally requested that way.
Relates to #31516
The rollup indexer uses a range query to select the next page
of results based on the last time bucket of the previous round
and the `delay` configured on the rollup job. This query uses
the `epoch_millis` format implicitly but doesn't set the `format`.
This result in errors during the rollup job if the field
definition doesn't allow this format. It can also miss documents
if the format is not accepted but another format in the field
definition is able to parse the query (e.g.: `epoch_second`).
This change ensures that we use `epoch_millis` as the only format
to parse the rollup range query.
* Detect and prevent configuration that triggers a Gradle bug
As we found in #31862, this can lead to a lot of wasted time as it's not
immediatly obvius what's going on.
Givent how many projects we have it's getting increasingly easier to run
into gradle/gradle#847.
Ensure our tests can run in a FIPS JVM
JKS keystores cannot be used in a FIPS JVM as attempting to use one
in order to init a KeyManagerFactory or a TrustManagerFactory is not
allowed.( JKS keystore algorithms for private key encryption are not
FIPS 140 approved)
This commit replaces JKS keystores in our tests with the
corresponding PEM encoded key and certificates both for key and trust
configurations.
Whenever it's not possible to refactor the test, i.e. when we are
testing that we can load a JKS keystore, etc. we attempt to
mute the test when we are running in FIPS 140 JVM. Testing for the
JVM is naive and is based on the name of the security provider as
we would control the testing infrastrtucture and so this would be
reliable enough.
Other cases of tests being muted are the ones that involve custom
TrustStoreManagers or KeyStoreManagers, null TLS Ciphers and the
SAMLAuthneticator class as we cannot sign XML documents in the
way we were doing. SAMLAuthenticator tests in a FIPS JVM can be
reenabled with precomputed and signed SAML messages at a later stage.
IT will be covered in a subsequent PR
There have been changes in error messages for `SSLHandshakeException`.
This has caused a couple of failures in our tests.
This commit modifies test verification to assert on exception type of
class `SSLHandshakeException`.
There was another issue in Java11 which caused NPE. The bug has now
been fixed on Java11 - early access build 22.
Bug Ref: https://bugs.java.com/bugdatabase/view_bug.do?bug_id=8206355
Enable the skipped tests due to this bug.
Closes#31940
There is currently no way to see what user executed a watch. This commit
adds the decrypted username to each execution in the watch history, in a
new field "user".
Closes#31772
The old RollupIT was a node IT, an flaky for a number of reasons.
This new version is an ESRestTestCase and should be a little more robust.
This was added to the multi-node QA tests as that seemed like the most
appropriate location. It didn't seem necessary to create a whole new
QA module.
Note: The only test that was ported was the "Big" test for validating
a larger dataset. The rest of the tests are represented in existing
yaml tests.
Closes#31258Closes#30232
Related to #30290
We can leverage the composite agg's new `missing_bucket` feature on
terms groupings. This means the aggregation criteria used in the indexer
will now return null buckets for missing keys.
Because all buckets are now returned (even if a key is null),
we can guarantee correct doc counts with
"combined" jobs (where a job rolls up multiple schemas). This was
previously impossible since composite would ignore documents that
didn't have _all_ the keys, meaning non-overlapping schemas would
cause composite to return no buckets.
Note: date_histo does not use `missing_bucket`, since a timestamp is
always required.
The docs have been adjusted to recommend a single, combined job. It
also makes reference to the previous issue to help users that are upgrading
(rather than just deleting the sections).
Historically we have loaded SSL objects (such as SSLContext,
SSLIOSessionStrategy) by passing in the SSL settings, constructing a
new SSL configuration from those settings and then looking for a
cached object that matches those settings.
The primary issue with this approach is that it requires a fully
configured Settings object to be available any time the SSL context
needs to be loaded. If the Settings include SecureSettings (such as
passwords for keys or keystores) then this is not true, and the cached
SSL object cannot be loaded at runtime.
This commit introduces an alternative approach of naming every cached
ssl configuration, so that it is possible to load the SSL context for
a named configuration (such as "xpack.http.ssl"). This means that the
calling code does not need to have ongoing access to the secure
settings that were used to load the configuration.
This change also allows monitoring exporters to use SSL passwords
from secure settings, however an exporter that uses a secure SSL setting
(e.g. truststore.secure_password) may not have its SSL settings updated
dynamically (this is prevented by a settings validator).
Exporters without secure settings can continue to be defined and updated
dynamically.
Added support for ASCII, BIT_LENGTH, CHAR, CHAR_LENGTH, LCASE, LENGTH, LTRIM, RTRIM, SPACE, UCASE functions.
Wherever Painless scripting is necessary (WHERE conditions, ORDER BY etc), those scripts are being used.
The test failure in #31916 revealed that updating
rules on a job was modifying the detectors list
in-place. That meant the old cluster state and the
updated cluster state had no difference and thus the
change was not propagated to non-master nodes.
This commit fixes that and also reviews all of ML
metadata in order to ensure immutability.
Closes#31916
A scroll holds a reference to the shard store. If the cluster is moving shards
around that reference can prevent a shard from relocating back to node it used
to be on, causing test failures.
Closes#31827
For historical reasons SQL restricts GROUP BY to only one field.
This commit removes the restriction and improves the test suite with
multi group by tests.
Close#31793
Register SQL as an xpackModule
Specify group for SQL QA to disambiguate projects (otherwise due to an
old Gradle bug (https://github.com/gradle/gradle/issues/847) any
subprojects under SQL QA will not be able to refer to SQL xpackModule
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Significantly improve the example snippets in the documentation.
The examples are part of the test suite and checked nightly.
To help readability, the existing dataset was extended (test_emp renamed
to emp plus library).
Improve output of JDBC tests to be consistent with the CLI
Add lenient flag to JDBC asserts to allow type widening (a long is
equivalent to a integer as long as the value is the same).
Some proxies require all requests to have paths starting with / since
there are no relative paths at the HTTP connection level. Elasticsearch
assumes paths are absolute. In order to run rest tests against a cluster
behind such a proxy, set the system property
tests.rest.client_path_prefix to /.
Make password hashing algorithm/cost configurable for the
stored passwords of users for the realms that this applies
(native, reserved). Replaces predefined choice of bcrypt with
cost factor 10.
This also introduces PBKDF2 with configurable cost
(number of iterations) as an algorithm option for password hashing
both for storing passwords and for the user cache.
Password hash validation algorithm selection takes into
consideration the stored hash prefix and only a specific number
of algorithnm and cost factor options for brypt and pbkdf2 are
whitelisted and can be selected in the relevant setting.
* Move to Gradle 4.8 RC1
* Use latest version of plugin
The current does not work with Gradle 4.8 RC1
* Switch to Gradle GA
* Add and configure build compare plugin
* add work-around for https://github.com/gradle/gradle/issues/5692
* work around https://github.com/gradle/gradle/issues/5696
* Make use of Gradle build compare with reference project
* Make the manifest more compare friendly
* Clear the manifest in compare friendly mode
* Remove animalsniffer from buildscript classpath
* Fix javadoc errors
* Fix doc issues
* reference Gradle issues in comments
* Conditionally configure build compare
* Fix some more doclint issues
* fix typo in build script
* Add sanity check to make sure the test task was replaced
Relates to #31324. It seems like Gradle has an inconsistent behavior and
the taks is not always replaced.
* Include number of non conforming tasks in the exception.
* No longer replace test task, create implicit instead
Closes#31324. The issue has full context in comments.
With this change the `test` task becomes nothing more than an alias for `utest`.
Some of the stand alone tests that had a `test` task now have `integTest`, and a
few of them that used to have `integTest` to run multiple tests now only
have `check`.
This will also help separarate unit/micro tests from integration tests.
* Revert "No longer replace test task, create implicit instead"
This reverts commit f1ebaf7d93e4a0a19e751109bf620477dc35023c.
* Fix replacement of the test task
Based on information from gradle/gradle#5730 replace the task taking
into account the task providres.
Closes#31324.
* Only apply build comapare plugin if needed
* Make sure test runs before integTest
* Fix doclint aftter merge
* PR review comments
* Switch to Gradle 4.8.1 and remove workaround
* PR review comments
* Consolidate task ordering
Merges the `query-builder-bwc` qa project into the
`full-cluster-restart` qa project, saving a cluster starts on every
build and *many* cluster starts on `./gradlew bwcTests`.
This creates a YAML test "features" that indices if the cluster being
tested has xpack installed (`xpack`) or if it does *not* have xpack
installed (`no_xpack`). It uses those features to centralize skipping
a few tests that fail if xpack is installed.
The plan is to use this in a followup to skip docs tests that require
xpack when xpack is not installed. We *plan* to use the declaration
of required license level on the docs page to generate the required
`skip`.
Closes#30933.
This pull request adds a full cluster restart test for a Rollup job.
The test creates and starts a Rollup job on the cluster and checks
that the job already exists and is correctly started on the upgraded
cluster.
This test allows to test that the persistent task state is correctly
parsed from the cluster state after the upgrade, as the status field
has been renamed to state in #31031.
The test undercovers a ClassCastException that can be thrown in
the RollupIndexer when the timestamp as a very low value that fits
into an integer. When it's the case, the value is parsed back as an
Integer instead of Long object and (long) position.get(rollupFieldName)
fails.
This adds an api to allow updating a filter:
POST _xpack/ml/filters/{filter_id}/_update
The request body may have:
- description: setting a new description
- add_items: a list of the items to add
- remove_items: a list of the items to remove
This commit also changes the PUT filter api to
error when the filter_id is already used. As
now there is an api for updating filters, the
put api should only be used to create new ones.
Also, updating a filter results into a notification
message auditing the change for every job that is
using that filter.
This pull request removes the relationship between the state
of persistent task (as stored in the cluster state) and the status
of the task (as reported by the Task APIs and used in various
places) that have been confusing for some time (#29608).
In order to do that, a new PersistentTaskState interface is added.
This interface represents the persisted state of a persistent task.
The methods used to update the state of persistent tasks are
renamed: updatePersistentStatus() becomes updatePersistentTaskState()
and now takes a PersistentTaskState as a parameter. The
Task.Status type as been changed to PersistentTaskState in all
places were it make sense (in persistent task customs in cluster
state and all other methods that deal with the state of an allocated
persistent task).
This adds a `description` to ML filters in order
to allow users to describe their filters in a human
readable form which is also editable (filter updates
to be added shortly).
We currently have a specific REST action to retrieve all aliaes, which
uses internally the get index API. This doesn't seem to be required
anymore though as the existing RestGetAliaesAction could as well take
the requests with no indices and aliases specified.
This commit removes the RestGetAllAliasesAction in favour of using
RestGetAliasesAction also for requests that don't specify indices nor
aliases. Similar to #31129.
Rules allow users to supply a detector with domain
knowledge that can improve the quality of the results.
The model detects statistically anomalous results but it
has no knowledge of the meaning of the values being modelled.
For example, a detector that performs a population analysis
over IP addresses could benefit from a list of IP addresses
that the user knows to be safe. Then anomalous results for
those IP addresses will not be created and will not affect
the quantiles either.
Another example would be a detector looking for anomalies
in the median value of CPU utilization. A user might want
to inform the detector that any results where the actual
value is less than 5 is not interesting.
This commit introduces a `custom_rules` field to the `Detector`.
A detector may have multiple rules which are combined with `or`.
A rule has 3 fields: `actions`, `scope` and `conditions`.
Actions is a list of what should happen when the rule applies.
The current options include `skip_result` and `skip_model_update`.
The default value for `actions` is the `skip_result` action.
Scope is optional and allows for applying filters on any of the
partition/over/by field. When not defined the rule applies to
all series. The `filter_id` needs to be specified to match the id
of the filter to be used. Optionally, the `filter_type` can be specified
as either `include` (default) or `exclude`. When set to `include`
the rule applies to entities that are in the filter. When set to
`exclude` the rule only applies to entities not in the filter.
There may be zero or more conditions. A condition requires `applies_to`,
`operator` and `value` to be specified. The `applies_to` value can be
either `actual`, `typical` or `diff_from_typical` and it specifies
the numerical value to which the condition applies. The `operator`
(`lt`, `lte`, `gt`, `gte`) and `value` complete the definition.
Conditions are combined with `and` and allow to specify numerical
conditions for when a rule applies.
A rule must either have a scope or one or more conditions. Finally,
a rule with scope and conditions applies when all of them apply.
This is in preparation of pushing the new
rules design in the `ml-cpp` side. These
tests will be switched on again after merging
in the new rules implementation.
This commit upgrades us to Netty 4.1.25. This upgrade is more
challenging than past upgrades, all because of a new object cleaner
thread that they have added. This thread requires an additional security
permission (set context class loader, needed to avoid leaks in certain
scenarios). Additionally, there is not a clean way to shutdown this
thread which means that the thread can fail thread leak control during
tests. As such, we have to filter this thread from thread leak control.
The core REST tests with security currently use a hardcoded username and
password. This is not amenable to running these tests in scenarios where
the user controls the creation of the cluster and owns the credentials
for this cluster. This commit enables running the core REST tests with
security with a custom username and password.
The goal of this commit is to address unknown licenses when producing
the dependencies info report. We have two different checks that we run
on licenses. The first check is whether or not we have stashed a copy of
the license text for a dependency in the repository. The second is to
map every dependency to a license type (e.g., BSD 3-clause). The problem
here is that the way we were handling licenses in the second check
differs from how we handle licenses in the first check. The first check
works by finding a license file with the name of the artifact followed
by the text -LICENSE.txt. Yet in some cases we allow mapping an artifact
name to another name used to check for the license (e.g., we map
lucene-.* to lucene, and opensaml-.* to shibboleth. The second check
understood the first way of looking for a license file but not the
second way. So in this commit we teach the second check about the
mappings from artifact names to license names. We do this by copying the
configuration from the dependencyLicenses task to the dependenciesInfo
task and then reusing the code from the first check in the second
check. There were some other challenges here though. For example,
dependenciesInfo was checking too many dependencies. For now, we should
only be checking direct dependencies and leaving transitive dependencies
from another org.elasticsearch artifact to that artifact (we want to do
this differently in a follow-up). We also want to disable
dependenciesInfo for projects that we do not publish, users only care
about licenses they might be exposed to if they use our assembled
products. With all of the changes in this commit we have eliminated all
unknown licenses. A follow-up will enforce that when we add a new
dependency it does not get mapped to unknown, these will be forbidden in
the future. Therefore, with this change and earlier changes are left
having no unknown licenses and two custom licenses; custom here means it
does not map to an SPDX license type. Those two licenses are xz and
ldapsdk. A future change will not allow additional custom licenses
unless they are explicitly whitelisted. This ensures that if a new
dependency is added it is mapped to an SPDX license or mapped to custom
because it does not have an SPDX license.
Use all running nodes as unicast seeds in the rolling restart tests to
avoid a race between pinging and the tests. Without this if the tests
are too fast then when a new node comes up and pings its single
configured seed node that node *might* not have a ping from the other
running node.
I pushed a test that `assertBusy`s for a whole hour accidentally. I was
testing something and forgot to revert my local hack but caught it on
backport. This removes it.
This is much more realistic and can find more issues. This causes the
"mixed cluster" tests to be run twice so I had to fix the tests to work
in that case. In most cases I did as little as possible to get them
working but in a few cases I went a little beyond that to make them
easier for me to debug while getting them to work. My test changes:
1. Remove the "basic indexing" tests and replace them with a copy of the
tests used in the OSS. We have no way of sharing code between these two
projects so for now I copy.
2. Skip the a few tests in the "one third" upgraded scenario:
* creating a scroll to be reused when the cluster is fully upgraded
* creating some ml data to be used when the cluster is fully ugpraded
3. Drop many "assert yellow and that the cluster has two nodes"
assertions. These assertions duplicate those made by the wait condition
and they fail now that we have three nodes.
4. Switch many "assert green and that the cluster has two nodes" to 3
nodes. These assertions are unique from the wait condition and, while
I imagine they aren't required in all cases, now is not the time to
find that out. Thus, I made them work.
5. Rework the index audit trail test so it is more obvious that it is
the same test expecting different numbers based on the shape of the
cluster. The conditions for which number are expected are fairly
complex because the index audit trail is shut down until the template
for it is upgraded and the template is upgraded when a master node is
elected that has the new version of the software.
6. Add some more information to debug the index audit trail test because
it helped me figure out what was going on.
I also dropped the `waitCondition` from the `rolling-upgrade-basic`
tests because it wasn't needed.
Closes#25336
In case an error is returned when calling search_shards on a remote
cluster, which will lead to throwing an exception in the coordinating
node, we should make sure that the status code returned by the
coordinating node is the same as the one returned by the remote
cluster. Up until now a 500 - Internal Server Error was always
returned. This commit changes this behaviour so that for instance if an
index is not found, which causes an 404, a 404 is also returned by the
coordinating node to the client.
Closes#27461
This modifies the high level rest client to allow calling code to
customize per request options for the bulk API. You do the actual
customization by passing a `RequestOptions` object to the API call
which is set on the `Request` that is generated by the high level
client. It also makes the `RequestOptions` a thing in the low level
rest client. For now that just means you use it to customize the
headers and the `httpAsyncResponseConsumerFactory` and we'll add
node selectors and per request timeouts in a follow up.
I only implemented this on the bulk API because it is the first one
in the list alphabetically and I wanted to keep the change small
enough to review. I'll convert the remaining APIs in a followup.
This commit removes the RequestBuilder generic type from Action. It was
needed to be used by the newRequest method, which in turn was used by
client.prepareExecute. Both of these methods are now removed, along with
the existing users of prepareExecute constructing the appropriate
builder directly.
Ed Savage
Ed Savage
Adrien Grand
Jay Modi
Lee Hinman
Nhat Nguyen
Zachary Tong
Benjamin Trent
Alexander Reelsen
Alpar Torok
Andrei Stefan
Yogesh Gaikwad
Zachary Tong
Colin Goodheart-Smithe
Nik Everett
Igor Motov
Daniel Mitterdorfer
Tim Vernum
Ioannis Kakavas
Christoph Büscher
Luca Cavanna
Jim Ferenczi
Michael Basnight
David Kyle
Jim Ferenczi
Tim Vernum
Tom Veasey
Dimitris Athanasiou
Martijn van Groningen
Boaz Leskes
Costin Leau
Armin Braun
Konrad Beiske
Tanguy Leroux
Ryan Ernst
Jason Tedor
Hendrik Muhs