Adds a new single-value metrics aggregation that computes the weighted
average of numeric values that are extracted from the aggregated
documents. These values can be extracted from specific numeric
fields in the documents.
When calculating a regular average, each datapoint has an equal "weight"; it
contributes equally to the final value. In contrast, weighted averages
scale each datapoint differently. The amount that each datapoint contributes
to the final value is extracted from the document, or provided by a script.
As a formula, a weighted average is the `∑(value * weight) / ∑(weight)`
A regular average can be thought of as a weighted average where every value has
an implicit weight of `1`.
Closes#15731
* add support for is_write_index in put-alias body parsing
The Rest Put-Alias Action does separate parsing of the alias body
to construct the IndicesAliasesRequest. This extra parsing
was missed in #30703.
* test flag was not just ignored by the parser
* disable backcompat tests
This creates a YAML test "features" that indices if the cluster being
tested has xpack installed (`xpack`) or if it does *not* have xpack
installed (`no_xpack`). It uses those features to centralize skipping
a few tests that fail if xpack is installed.
The plan is to use this in a followup to skip docs tests that require
xpack when xpack is not installed. We *plan* to use the declaration
of required license level on the docs page to generate the required
`skip`.
Closes#30933.
Get Mapping currently throws index not found exception (and returns
404 status code) from the REST layer whenever an index was specified
and no indices have been returned. We should not have this logic in the
REST layer though as only our index resolver should decide whether we
need to throw exceptions or not based on provided indices and corresponding
indices options.
Closes#31485
This commit adds the is-write-index flag for aliases.
It allows requests to set the flag, and responses to display the flag.
It does not validate and/or affect any indexing/getting/updating behavior
of Elasticsearch -- this will be done in a follow-up PR.
Add a `NodeSelector` so that users can filter the nodes that receive
requests based on node attributes.
I believe we'll need this to backport #30523 and we want it anyway.
I also added a bash script to help with rebuilding the sniffer parsing
test documents.
Allows users of the Low Level REST client to specify which hosts a
request should be run on. They implement the `NodeSelector` interface
or reuse a built in selector like `NOT_MASTER_ONLY` to chose which nodes
are valid. Using it looks like:
```
Request request = new Request("POST", "/foo/_search");
RequestOptions options = request.getOptions().toBuilder();
options.setNodeSelector(NodeSelector.NOT_MASTER_ONLY);
request.setOptions(options);
...
```
This introduces a new `Node` object which contains a `HttpHost` and the
metadata about the host. At this point that metadata is just `version`
and `roles` but I plan to add node attributes in a followup. The
canonical way to **get** this metadata is to use the `Sniffer` to pull
the information from the Elasticsearch cluster.
I've marked this as "breaking-java" because it breaks custom
implementations of `HostsSniffer` by renaming the interface to
`NodesSniffer` and by changing it from returning a `List<HttpHost>` to a
`List<Node>`. It *shouldn't* break anyone else though.
Because we expect to find it useful, this also implements `host_selector`
support to `do` statements in the yaml tests. Using it looks a little
like:
```
---
"example test":
- skip:
features: host_selector
- do:
host_selector:
version: " - 7.0.0" # same syntax as skip
apiname:
something: true
```
The `do` section parses the `version` string into a host selector that
uses the same version comparison logic as the `skip` section. When the
`do` section is executed it passed the off to the `RestClient`, using
the `ElasticsearchHostsSniffer` to sniff the required metadata.
The idea is to use this in mixed version tests to target a specific
version of Elasticsearch so we can be sure about the deprecation
logging though we don't currently have any examples that need it. We do,
however, have at least one open pull request that requires something
like this to properly test it.
Closes#21888
With `max_concurrent_shard_requests` we used to throttle / limit
the number of concurrent shard requests a high level search request
can execute per node. This had several problems since it limited the
number on a global level based on the number of nodes. This change
now throttles the number of concurrent requests per node while still
allowing concurrency across multiple nodes.
Closes#31192
The following analyzers were moved from server module to analysis-common module:
`snowball`, `arabic`, `armenian`, `basque`, `bengali`, `brazilian`, `bulgarian`,
`catalan`, `chinese`, `cjk`, `czech`, `danish`, `dutch`, `english`, `finnish`,
`french`, `galician` and `german`.
Relates to #23658
* Fix index prefixes to work with span_multi
Text fields that use `index_prefixes` can rewrite `prefix` queries into
`term` queries internally. This commit fix the handling of this rewriting
in the `span_multi` query.
This change also copies the index options of the text field into the
prefix field in order to be able to run positional queries. This is mandatory
for `span_multi` to work but this could also be useful to optimize `match_phrase_prefix`
queries in a follow up. Note that this change can only be done on indices created
after 6.3 since we set the index options to doc only in this version.
Fixes#31056
Specifying `index_phrases: true` on a text field mapping will add a subsidiary
[field]._index_phrase field, indexing two-term shingles from the parent field.
The parent analysis chain is re-used, wrapped with a FixedShingleFilter.
At query time, if a phrase match query is executed, the mapping will redirect it
to run against the subsidiary field.
This should trade faster phrase querying for a larger index and longer indexing
times.
Relates to #27049
Since master will always communicate with a >=6.4 node, the logic for
checking if the node is 6.4 and conditionally reading and writing based
on that can be removed from master. This logic will stay in 6.x as it is
the bridge to the cleaner response in master. This also unmutes the
failing test due to this bwc change.
Closes#30807
This change deprecates completion queries and documents without context that target a
context enabled completion field. Querying without context degrades the search
performance considerably (even when the number of indexed contexts is low).
This commit targets master but the deprecation will take place in 6.x and the functionality
will be removed in 7 in a follow up.
Closes#29222
This change adds a new option to the composite aggregation named `missing_bucket`.
This option can be set by source and dictates whether documents without a value for the
source should be ignored. When set to true, documents without a value for a field emits
an explicit `null` value which is then added in the composite bucket.
The `missing` option that allows to set an explicit value (instead of `null`) is deprecated in this change and will be removed in a follow up (only in 7.x).
This commit also changes how the big arrays are allocated, instead of reserving
the provided `size` for all sources they are created with a small intial size and they grow
depending on the number of buckets created by the aggregation:
Closes#29380
Include size of snapshot in snapshot metadata
Adds difference of number of files (and file sizes) between prev and current snapshot. Total number/size reflects total number/size of files in snapshot.
Closes#18543
This PR breaks the include_defaults functionality of the get settings API into its own
test, which is skipped for mixed-mode clusters containing pre-6.4 nodes.
The writeTo method of VerifyRepositoryResponse incorrectly used its
local version to determine what it was receiving, rather than the
sender's version. This fixes a bug that ocassionally happened when a 6.4
master node sent data to a 7.0 client, causing the number of bytes to be
improperly read. This also unmutes the test.
Closes#30807
This commit adds the ability to configure how a docvalue field should be
formatted, so that it would be possible eg. to return a date field
formatted as the number of milliseconds since Epoch.
Closes#27740
Currently in a rescore request if window_size is smaller than
the top N documents returned (N=size), explanation of scores could be incorrect
for documents that were a part of topN and not part of rescoring.
This PR corrects this, but saving in RescoreContext docIDs of documents
for which rescoring was applied, and adding rescoring explanation
only for these docIDs.
Closes#28725
Since #30143, the Cluster State API should always returns the current
cluster_uuid in the response body, regardless of the metrics filters.
This is not exactly true as it is returned only if metadata metrics and
no specific indices are requested.
This commit fixes the behavior to always return the cluster_uuid and
add new test.
This pipeline aggregation gives the user the ability to script functions that "move" across a window
of data, instead of single data points. It is the scripted version of MovingAvg pipeline agg.
Through custom script contexts, we expose a number of convenience methods:
- MovingFunctions.max()
- MovingFunctions.min()
- MovingFunctions.sum()
- MovingFunctions.unweightedAvg()
- MovingFunctions.linearWeightedAvg()
- MovingFunctions.ewma()
- MovingFunctions.holt()
- MovingFunctions.holtWinters()
- MovingFunctions.stdDev()
The user can also define any arbitrary logic via their own scripting, or combine with the above methods.
When we split/shrink an index we open several IndexWriter instances
causeing file-deletes to be pending on windows. This subsequently fails
when we open an IW to bootstrap the index history due to pending deletes.
This change sidesteps the check since we know our history goes forward
in terms of files and segments.
Closes#30416
Now that the change to deprecate copy settings and disallow it being
explicitly set to false is backported, this commit adjusts the BWC
versions in master.
This commit changes the default out-of-the-box configuration for the
number of shards from five to one. We think this will help address a
common problem of oversharding. For users with time-based indices that
need a different default, this can be managed with index templates. For
users with non-time-based indices that find they need to re-shard with
the split API in place they no longer need to resort only to
reindexing.
Since this has the impact of changing the default number of shards used
in REST tests, we want to ensure that we still have coverage for issues
that could arise from multiple shards. As such, we randomize (rarely)
the default number of shards in REST tests to two. This is managed via a
global index template. However, some tests check the templates that are
in the cluster state during the test. Since this template is randomly
there, we need a way for tests to skip adding the template used to set
the number of shards to two. For this we add the default_shards feature
skip. To avoid having to write our docs in a complicated way because
sometimes they might be behind one shard, and sometimes they might be
behind two shards we apply the default_shards feature skip to all docs
tests. That is, these tests will always run with the default number of
shards (one).
The following tokenizers were moved: classic, edge_ngram,
letter, lowercase, ngram, path_hierarchy, pattern, thai, uax_url_email and
whitespace.
Left keyword tokenizer factory in server module, because
normalizers directly depend on it.This should be addressed on a
follow up change.
Relates to #23658
We want copying settings to be the default behavior. This commit
deprecates not copying settings, and disallows explicitly not copying
settings. This gives users a transition path to the future default
behavior.
there are two tests that have failed multiple times in one day on windows CI.
This commit AwaitsFixes them until their timeout issues are resolved.
tracking here: https://github.com/elastic/elasticsearch/issues/30503
That PR changed the execution path of index settings default to be on the master
until the PR is back-ported the old master will not return default settings.
This PR adds support for the Get Settings API to the java high-level rest client.
Furthermore, logic related to the retrieval of default settings has been moved from the rest layer into the transport layer and now default settings may be retrieved consistency via both the rest API and the transport API.
Many tests are added with a version check so that they do not run against a
version that doesn't have the feature yet. Master is 7.0, so all tests that
do not run against 6.0+ can be removed and the version check can be removed
on all tests that always run on 6.0+.
This adds a new `_ignored` meta field which indexes and stores fields that have
been ignored at index time because of the `ignore_malformed` option. It makes
malformed documents easier to identify by using `exists` or `term(s)` queries
on the `_ignored` field.
Closes#29494
Today when an index is created from shrinking or splitting an existing
index, the target index inherits almost none of the source index
settings. This is surprising and a hassle for operators managing such
indices. Given this is the default behavior, we can not simply change
it. Instead, we start by introducing the ability to copy settings. This
flag can be set on the REST API or on the transport layer and it has the
behavior that it copies all settings from the source except non-copyable
settings (a property of a setting introduced in this
change). Additionally, settings on the request will always override.
This change is the first step in our adventure:
- this flag is added here in 7.0.0 and immediately deprecated
- this flag will be backported to 6.4.0 and remain deprecated
- then, we will remove the ability to set this flag to false in 7.0.0
- finally, in 8.0.0 we will remove this flag and the only behavior will
be for settings to be copied
Currently, the only way to get the REST response for the `/_cluster/state`
call to return the `cluster_uuid` is to request the `metadata` metrics,
which is one of the most expensive response structures. However, external
monitoring agents will likely want the `cluster_uuid` to correlate the
response with other API responses whether or not they want cluster
metadata.
Clearing the cache indices can be done via GET and POST. As GET should
only support read only operations, this removes the support for using
GET for clearing the indices caches.
This commit renames the bulk thread pool to the write thread pool. This
is to better reflect the fact that the underlying thread pool is used to
execute any document write request (single-document index/delete/update
requests, and bulk requests).
With this change, we add support for fallback settings
thread_pool.bulk.* which will be supported until 7.0.0.
We also add a system property so that the display name of the thread
pool remains as "bulk" if needed to avoid breaking users.
Added an api that allows to execute an arbitrary script and a result to be returned.
```
POST /_scripts/painless/_execute
{
"script": {
"source": "params.var1 / params.var2",
"params": {
"var1": 1,
"var2": 1
}
}
}
```
Relates to #27875
Now that single-document indexing requests are executed on the bulk
thread pool the index thread pool is no longer needed. This commit
removes this thread pool from Elasticsearch.
This commit add the `include_type_name` option to the `index`, `update`,
`delete`, `get`, `bulk` and `search` APIs. When set to `false`, the response
will omit the `_type` in the response. This option doesn't work if the endpoint
contains a type. For instance, the following call would succeed:
```
GET index/_doc/1?include_type_name=false
```
But the following one would fail:
```
GET index/some_type/1?include_type_name=false
```
Relates #15613
CRUD: Parsing changes for UpdateRequest (#29293)
Use `ObjectParser` to parse `UpdateRequest` so we reject unknown fields
and drop support for the `_fields` parameter because it was deprecated
in 5.x.
Unlike the `indices.create`, `indices.get_mapping` and `indices.put_mapping`
APIs, the index APIs do not need the `include_type_name` option, they can work
work with and without types withouth knowing whether types are being used.
Internally, `_doc` is used as a type if no type is provided, like for the
`indices.put_mapping` API.
Currently, a flush stats contains only the total flush which is the sum
of manual flush (via API) and periodic flush (async triggered when the
uncommitted translog size is exceeded the flush threshold). Sometimes,
it's useful to know these two numbers independently. This commit tracks
and returns a periodic flush count in a flush stats.
This adds an `include_type_name` option to the `indices.create`,
`indices.get_mapping` and `indices.put_mapping` APIs, which defaults to `true`.
When set to `false`, then mappings will be returned directly in the body of
the `indices.get_mapping` API, without keying them by the type name, the
`indices.create` will expect mappings directly under the `mappings` key, and
the `indices.put_mapping` will use `_doc` as a type name and fail if a `type`
is provided explicitly.
Relates #15613
Some features have been deprecated since `6.0` like the `_parent` field or the
ability to have multiple types per index. This allows to remove quite some
code, which in-turn will hopefully make it easier to proceed with the removal
of types.
* Move ObjectParser into the x-content lib
This moves `ObjectParser`, `AbstractObjectParser`, and
`ConstructingObjectParser` into the libs/x-content dependency. This decoupling
allows them to be used for parsing for projects that don't want to depend on the
entire Elasticsearch jar.
Relates to #28504
Currently the ranking evaluation API doesn't support many of the
standard parameters of the search API. Some of these make sense, like
adding support for the common indices options parameters, which this
change adds.
Today we report thread pool info using a common object. This means that
we use a shared set of terminology that is not consistent with the
terminology used to the configure thread pools. This holds in particular
for the minimum and maximum number of threads in the thread pool where
we use the following terminology:
thread pool info | fixed | scaling
min core size
max max size
A previous change addressed this for the nodes info API. This commit
changes the display of thread pool info in the cat thread pool API too
to be dependent on the type of the thread pool so that we can align the
terminology in the output of thread pool info with the terminology used
to configure a thread pool.
Some source files seem to have the execute bit (a+x) set, which doesn't
really seem to hurt but is a bit odd. This change removes those, making
the permissions similar to other source files in the repository.
This change refactors the composite aggregation to add an execution mode that visits documents in the order of the values
present in the leading source of the composite definition. This mode does not need to visit all documents since it can early terminate
the collection when the leading source value is greater than the lowest value in the queue.
Instead of collecting the documents in the order of their doc_id, this mode uses the inverted lists (or the bkd tree for numerics) to collect documents
in the order of the values present in the leading source.
For instance the following aggregation:
```
"composite" : {
"sources" : [
{ "value1": { "terms" : { "field": "timestamp", "order": "asc" } } }
],
"size": 10
}
```
... can use the field `timestamp` to collect the documents with the 10 lowest values for the field instead of visiting all documents.
For composite aggregation with more than one source the execution can early terminate as soon as one of the 10 lowest values produces enough
composite buckets. For instance if visiting the first two lowest timestamp created 10 composite buckets we can early terminate the collection since it
is guaranteed that the third lowest timestamp cannot create a composite key that compares lower than the one already visited.
This mode can execute iff:
* The leading source in the composite definition uses an indexed field of type `date` (works also with `date_histogram` source), `integer`, `long` or `keyword`.
* The query is a match_all query or a range query over the field that is used as the leading source in the composite definition.
* The sort order of the leading source is the natural order (ascending since postings and numerics are sorted in ascending order only).
If these conditions are not met this aggregation visits each document like any other agg.
By the time the master branch is released the deprecated url
parameters in the `/_cache/clear` API will have been deprecated
for a couple of minor releases. Since master will be the next
major release we are fine with removing these parameters.
* Add a REST integration test that documents date_range support
Add a test case that exercises date_range aggregations using the missing
option.
Addresses #17597
* Test cleanup and correction
Adding a document with a null date to exercise `missing` option, update
test name to something reasonable.
* Update documentation to explain how the "missing" parameter works for
date_range aggregations.
* Wrap lines at 80 chars in docs.
* Change format of test to YAML for readability.
This reverts commit f057fc294a.
The rescorer does not resort the collapsed values inside the top docs
during rescoring. For this reason the Lucene rescorer is not compatible
with collapsing.
Relates #27243
* Reject regex search if regex string is too long (#28344)
* Add docs
* Introduce index level setting `index.max_regex_length`
to control the maximum length of the regular expression
Closes#28344
We added a rest test for the translog last modified age without a
version check. This causes BWC failed because the stats are not
available in the old versions.
Relates #28613
Currently the Translog constructor is capable both of opening an existing translog and creating a
new one (deleting existing files). This PR separates these two into separate code paths. The
constructors opens files and a dedicated static methods creates an empty translog.
Adds allow_partial_search_results flag to search requests with default setting = true.
When false, will error if search either timeouts, has partial errors or has missing shards rather
than returning partial search results. A cluster-level setting provides a default for search requests with no flag.
Closes#27435
This adds the ability to index term prefixes into a hidden subfield, enabling prefix queries to be run without multitermquery rewrites. The subfield reuses the analysis chain of its parent text field, appending an EdgeNGramTokenFilter. It can be configured with minimum and maximum ngram lengths. Query terms with lengths outside this min-max range fall back to using prefix queries against the parent text field.
The mapping looks like this:
"my_text_field" : {
"type" : "text",
"analyzer" : "english",
"index_prefix" : { "min_chars" : 1, "max_chars" : 10 }
}
Relates to #27049
This change adds the `after_key` of a composite aggregation directly in the response.
It is redundant when all buckets are not filtered/removed by a pipeline aggregation since in this case the `after_key` is always the last bucket
in the response. Though when using a pipeline aggregation to filter composite buckets, the `after_key` can be lost if the last bucket is filtered.
This commit fixes this situation by always returning the `after_key` in a dedicated section.
This commit adds the ability to specify a date format on the `date_histogram` composite source.
If the format is defined, the key for the source is returned as a formatted date.
Closes#27923
MixedClusterClientYamlTestSuiteIT sometimes fails when executing the
indices.stats/13_fields/* REST tests. It does not reproduce locally
but the execution logs show that it failed when a shard is relocating
during the set up execution. This commit change the set up so that it
now waits for all shards to be active before executing the tests.
closes#26732, #27146
Currently when adding a document with a `null` value for a range field,
the range field mapper raises an error. Instead we should ignore null like
we do eg. with numbers or geo points.
Closes#27845
Java 9 added some enhancements to the internationalization support that
impact our date parsing support. To ensure flawless BWC and consistent
behavior going forward Java 9 runtimes requrie the system property
`java.locale.providers=COMPAT` to be set.
Closes#10984
- Introduce index level settings to control the maximum number of terms
that can be used in a Terms Query
- Throw an error if a request exceeds this max number
Closes#18829
This change fixes a bug when a keyword term in the `after` key is not present in the shard.
In this case the global ord of the document values are compared with the insertion point of the
`after` keyword and values that are equal to the insertion point should be considered "after" the top value.
* Limit the analyzed text for highlighting
- Introduce index level settings to control the max number of character
to be analyzed for highlighting
- Throw an error if analysis is required on a larger text
Closes#27517
Previously to this change when DocStats are added together (for example when adding the index size of all primary shards for an index) we naively added the `totalSizeInBytes` together. This worked most of the time but not when the index size on one or multiple shards was reported to be `-1` (no value).
This change improves the logic by considering if the current value or the value to be added is `-1`:
* If the current and new value are both `-1` the value remains at `-1`
* If the current value is `-1` and the new value is not `-1`, current value is changed to be equal to the new value
* If the current value is not `-1` and the new value is `-1` the new value is ignored and the current value is not changed
* If both the current and new values are not `-1` the current value is changed to be equal to the sum of the current and new values.
The change also re-enables the failing rollover YAML test that was failing due to this bug.
Currently FiltersAggregationBuilder#doRewrite creates a new FiltersAggregationBuilder which doesn't correctly copy the original "keyed" field if a non-keyed filter gets rewritten.
This can cause rendering bugs of the output aggregations like the one reported in #27841.
Closes#27841
This commit moves the range field mapper back to core so that we can
remove the compile-time dependency of percolator on mapper-extras which
compilcates dependency management for the percolator client JAR, and
modules should not be intertwined like this anyway.
Relates #27854
This commit adds a new dynamic cluster setting named `search.max_buckets` that can be used to limit the number of buckets created per shard or by the reduce phase. Each multi bucket aggregator can consume buckets during the final build of the aggregation at the shard level or during the reduce phase (final or not) in the coordinating node. When an aggregator consumes a bucket, a global count for the request is incremented and if this number is greater than the limit an exception is thrown (TooManyBuckets exception).
This change adds the ability for multi bucket aggregator to "consume" buckets in the global limit, the default is 10,000. It's an opt-in consumer so each multi-bucket aggregator must explicitly call the consumer when a bucket is added in the response.
Closes#27452#26012
Add an index level setting `index.analyze.max_token_count` to control
the number of generated tokens in the _analyze endpoint.
Defaults to 10000.
Throw an error if the number of generated tokens exceeds this limit.
Closes#27038
Also include _type and _id for parent/child hits inside inner hits.
In the case of top_hits aggregation the nested search hits are
directly returned and are not grouped by a root or parent document, so
it is important to include the _id and _index attributes in order to know
to what documents these nested search hits belong to.
Closes#27053
Today we require users to prepare their indices for split operations.
Yet, we can do this automatically when an index is created which would
make the split feature a much more appealing option since it doesn't have
any 3rd party prerequisites anymore.
This change automatically sets the number of routinng shards such that
an index is guaranteed to be able to split once into twice as many shards.
The number of routing shards is scaled towards the default shard limit per index
such that indices with a smaller amount of shards can be split more often than
larger ones. For instance an index with 1 or 2 shards can be split 10x
(until it approaches 1024 shards) while an index created with 128 shards can only
be split 3x by a factor of 2. Please note this is just a default value and users
can still prepare their indices with `index.number_of_routing_shards` for custom
splitting.
NOTE: this change has an impact on the document distribution since we are changing
the hash space. Documents are still uniformly distributed across all shards but since
we are artificually changing the number of buckets in the consistent hashign space
document might be hashed into different shards compared to previous versions.
This is a 7.0 only change.
Add an index level setting `index.mapping.nested_objects.limit` to control
the number of nested json objects that can be in a single document
across all fields. Defaults to 10000.
Throw an error if the number of created nested documents exceed this
limit during the parsing of a document.
Closes#26962
This change removes the module named aggs-composite and adds the `composite` aggs
as a core aggregation. This allows other plugins to use this new aggregation
and simplifies the integration in the HL rest client.
While we have an assertion that checks if the number of routing shards is a multiple
of the number of shards we need a real hard exception that checks this way earlier.
This change adds a check and test that is executed before we create the index.
Relates to #26931
Today Cross Cluster Search requires at least one node in each remote cluster to be up once the cross cluster search is run. Otherwise the whole search request fails despite some of the data (either local and/or remote) is available. This happens when performing the _search/shards calls to find out which remote shards the query has to be executed on. This scenario is different from shard failures that may happen later on when the query is actually executed, in case e.g. remote shards are missing, which is not going to fail the whole request but rather yield partial results, and the _shards section in the response will indicate that.
This commit introduces a boolean setting per cluster called search.remote.$cluster_alias.skip_if_disconnected, set to false by default, which allows to skip certain clusters if they are down when trying to reach them through a cross cluster search requests. By default all clusters are mandatory.
Scroll requests support such setting too when they are first initiated (first search request with scroll parameter), but subsequent scroll rounds (_search/scroll endpoint) will fail if some of the remote clusters went down meanwhile.
The search API response contains now a new _clusters section, similar to the _shards section, that gets returned whenever one or more clusters were disconnected and got skipped:
"_clusters" : {
"total" : 3,
"successful" : 2,
"skipped" : 1
}
Such section won't be part of the response if no clusters have been skipped.
The per cluster skip_unavailable setting value has also been added to the output of the remote/info API.
Today we index dummy values for seq_ids and version on nested documents.
This is on the one hand trappy since users can request these values via
inner hits and on the other hand not necessarily good for compression since
the dummy value will likely not compress well when seqIDs are lowish.
This change ensures that we share the same field values for all documents in a
nested block. This won't have any overhead, in-fact it might be more efficient since
we even reduce the work needed slightly.
Stardardize underscore requirements in parameters across different type of
requests:
_index, _type, _source, _id keep their underscores
params like version and retry_on_conflict will be without underscores
Throw an error if older versions of parameters are used
BulkRequest, MultiGetRequest, TermVectorcRequest, MoreLikeThisQuery
were changed
Closes#26886
The default value for ignore_unavailable did not match what was documented when using the REST APIs for snapshot creation and restore. This commit sets the default value of ignore_unavailable to false, the way it is documented and ensures it's the same when using either REST API or transport client.
Closes#25359
* REST: Rename ingest.processor.grok to ingest.processor_grok
* REST: Rename remote.info to cluster.remote_info
* REST: Fixed bad YAML comments
* REST: Force dummy scripts to be strings, not numbers
* REST: Fix bad YAML in search/110_field_collapsing.yml
* REST: Adjust percentile tests to work with Perl number handling
Queries that create a scroll context cannot use the cache.
They modify the search context during their execution so using the cache
can lead to duplicate result for the next scroll query.
This change fails the entire request if the request_cache option is explictely set
on a query that creates a scroll context (`scroll=1m`) and make sure internally that we never
use the cache for these queries when the option is not explicitely used.
For 6.x a deprecation log will be printed instead of failing the entire request and the request_cache hint
will be ignored (forced to false).
This change adds a new `_split` API that allows to split indices into a new
index with a power of two more shards that the source index. This API works
alongside the `_shrink` API but doesn't require any shard relocation before
indices can be split.
The split operation is conceptually an inverse `_shrink` operation since we
initialize the index with a _syntetic_ number of routing shards that are used
for the consistent hashing at index time. Compared to indices created with
earlier versions this might produce slightly different shard distributions but
has no impact on the per-index backwards compatibility. For now, the user is
required to prepare an index to be splittable by setting the
`index.number_of_routing_shards` at index creation time. The setting allows the
user to prepare the index to be splittable in factors of
`index.number_of_routing_shards` ie. if the index is created with
`index.number_of_routing_shards: 16` and `index.number_of_shards: 2` it can be
split into `4, 8, 16` shards. This is an intermediate step until we can make
this the default. This also allows us to safely backport this change to 6.x.
The `_split` operation is implemented internally as a DeleteByQuery on the
lucene level that is executed while the primary shards execute their initial
recovery. Subsequent merges that are triggered due to this operation will not be
executed immediately. All merges will be deferred unti the shards are started
and will then be throttled accordingly.
This change is intended for the 6.1 feature release but will not support pre-6.1
indices to be split unless these indices have been shrunk before. In that case
these indices can be split backwards into their original number of shards.
* Enhances exists queries to reduce need for `_field_names`
Before this change we wrote the name all the fields in a document to a `_field_names` field and then implemented exists queries as a term query on this field. The problem with this approach is that it bloats the index and also affects indexing performance.
This change adds a new method `existsQuery()` to `MappedFieldType` which is implemented by each sub-class. For most field types if doc values are available a `DocValuesFieldExistsQuery` is used, falling back to using `_field_names` if doc values are disabled. Note that only fields where no doc values are available are written to `_field_names`.
Closes#26770
* Addresses review comments
* Addresses more review comments
* implements existsQuery explicitly on every mapper
* Reinstates ability to perform term query on `_field_names`
* Added bwc depending on index created version
* Review Comments
* Skips tests that are not supported in 6.1.0
These values will need to be changed after backporting this PR to 6.x
Update API, Cluster Update Settings API and Put Index Template API didn't have the request body set to required in their spec, hence this commit updates the spec to align them with reality.
The new discovery stats were pushed to the 6.x branch (currently
versioned at 6.1.0) but master was not updated to reflect this. This
impacts the mixed-cluster BWC tests because a 6.1.0 node will be trying
to send a 7.0.0 node the new discovery stats but the 7.0.0 did not yet
understand that it should be reading these when talking to a 6.1.0
node. This commit addresses this, and changes the skip version on the
discovery stats REST tests.
It's believed that using diffs obsoletes the other mechanism for reusing the
bits of the ClusterState that didn't change between updates, but in fact we
don't know for sure how often the diff mechanism works successfully. The stats
collected here will tell us.
The shard preference _primary, _replica and its variants were useful
for the asynchronous replication. However, with the current impl, they
are no longer useful and should be removed.
Closes#26335
This test has been failing in th Ruby runner, since it assumed the `headers` feature,
but was not annotated accordingly.
This patch adds the `skip` clause with the `headers` feature.
Closes#26896
Early termination with index sorting always return the best top N in the response but set the flag `terminated_early`
in the response. This can be confusing because we use the same flag for `terminate_after` which on the contrary returns partial results.
This change removes the flag when results are not partial (early termination due to index sorting) and keeps it only when `terminate_after` is used.
Closes#26408
Adds the wait_for_active_shards parameter to the index open command. Similar to the index creation command, the index open command will now, by default, wait until the primaries have been allocated.
Closes#20937
This commit adds a skip for the bad request REST test on pre-6.0
nodes. Previously, a request for /_(.*) where $1 is not an existing
endpoint would return a 404. This is because the request would be
treated as a get index request for an index named _$1. However, an index
can never start with "_" so logic was added to detect this and return a
400 instead as this should be treated as a bad request. During the
mixed-cluster BWC tests, a node running pre-6.0 code will still return a
404 though. Therefore, this test needs to skipped in such a
mixed-cluster scenario.
This commit adds validation to the resolving of indexes in the wildcard
expression resolver. It no longer throws a 404 Not Found when resolving
invalid indices. It throws a 400 instead, as it is an invalid
index. This was the behavior of 5.x.
After backporting the script_field soft limit to the 6.x branches, this test can
now also run in a mixed cluster.
Relates to #26598
enter the commit message for your changes. Lines starting
Today we have all non-plugin mappers in core. I'd like to start moving those
that neither map to json datatypes nor are very frequently used like `date` or
`ip` to a module.
This commit creates a new module called `mappers-extra` and moves the
`scaled_float` and `token_count` mappers to it. I'd like to eventually move
`range` fields there but it's more complicated due to their intimate
relationship with range queries.
Relates #10368
Requesting to many script_fields in a search request can be costly
because of script execution. This change introduces a soft limit on the number
of script fields that are allowed per request. The setting can be
changed per index using the index.max_script_fields setting.
Relates to #26390
Requesting to many docvalue_fields in a search request can potentially be costly
because it might incur a per-field per-document seek. This change introduces a
soft limit on the number of fields that can be retrieved. The setting can be
changed per index using the `index.max_docvalue_fields_search` setting.
Relates to #26390
This change exposes the duplicate removal option added in Lucene for the completion suggester
with a new option called `skip_duplicates` (defaults to false).
This commit also adapts the custom suggest collector to handle deduplication when multiple contexts match the input.
Closes#23364
This change adds a dynamic cluster setting named `search.max_keep_alive`.
It is used as an upper limit for scroll expiry time in scroll queries and defaults to 1 hour.
This change also ensures that the existing setting `search.default_keep_alive` is always smaller than `search.max_keep_alive`.
Relates #11511
* check style
* add skip for bwc
* iter
* Add a maxium throttle wait time of 1h for reindex
* review
* remove empty line
The `from` search parameter cannot really be used in scrolled searches. This
commit adds a check for this case to the SearchRequest#validate() method so we
can reported it as an error rather than silently ignoring it.
Closes#9373
* Add REST tests for value_count, stats, extended_stats and cardinality aggs
Also updates the document type of of other agg REST tests to `doc`
Related to #26220
Due to the weird way of structuring the serialization code in AcknowledgedRequest, many request types forgot to properly serialize the request timeout, for example "index deletion", "index rollover", "index shrink", "putting pipeline", and other requests. This means that if those requests were not directly sent to the master node, the acknowledgement timeout information would be lost (and the default used instead).
Some requests also don't properly expose the timeout mechanism in the REST layer, such as put / delete stored script. This commit fixes all that.
Raw requests are supported only by the java yaml test runner and were introduced to test docs snippets. Some yaml tests ended up using them (see #23497) which causes failures for other language clients. This commit migrates those yaml tests to Java tests that send requests through the Java low-level REST client, and also moves the ability to send raw requests to a special client that's only available when testing docs snippets.
Closes#25694
When `refresh=wait_for` is set on an indexing request, we register a listener on the shards that are call during the next refresh. During the recover translog phase, when the engine is open, we have a window of time when indexing operations succeed and they can add their listeners. Those listeners will only be called when the recovery finishes as we do not refresh during recoveries (unless the indexing buffer is full). Next to being a bad user experience, it can also cause deadlocks with an ongoing peer recovery that may wait for those operations to mark the replica in sync (details below).
To fix this, this PR changes refresh listeners to be a noop when the shard is not yet serving reads (implicitly covering the recovery period). It doesn't matter anyway.
Deadlock with recovery:
When finalizing a peer recovery we mark the peer as "in sync". To do so we wait until the peer's local checkpoint is at least as high as the global checkpoint. If an operation with `refresh=wait_for` is added as a listener on that peer during recovery, it is not completed from the perspective of the primary. The primary than may wait for it to complete before advancing the local checkpoint for that peer. Since that peer is not considered in sync, the global checkpoint on the primary can be higher, causing a deadlock. Operation waits for recovery to finish and a refresh to happen. Recovery waits on the operation.
In the refresh REST tests we setup some persistent settings for debug
logging. In the teardown, we try to restore the logging level back to
info via another persistent setting but this is a mistake because other
tests check if there are no persistent settings. To fix this, we remove
the persistent setting that we added.
We are chasing a test failure in the "refresh=wait_for waits until
changes are visible in search" test yet the logs currently give us no
indication what is happening. This commit adds debug logging for this
test, and cleans up this logging in a teardown section. We can remove
this additional logging after we chase the test failure down.
Since the setup attempts to create an index with two types, and the setup runs before any test,
this will fail on versions 6.0+ before it has a chance to check the skip in each individual
test. Moving to the setup resolves this issue.
This change rewrites search requests on the coordinating node before
we send requests to the individual shards. This will reduce the rewrite load
and object creation for each rewrite on the executing nodes and will fetch
resources only once instead of N times once per shard for queries like `terms`
query with index lookups. (among percolator and geo-shape)
Relates to #25791
Also has updates to ScriptMetaData for allowing the old namespace format to be loaded all the way back through 5.0; however, it will throw an exception if two scripts share the same id but different languages.
With #23997 and #25268 we have changed put alias, delete alias, update aliases and delete index to not accept aliases. Instead concrete indices should be provided as their index parameter.
This commit improves the error message in case aliases are provided, from an IndexNotFoundException (404 status code) with "no such index" message, to an IllegalArgumentException (400 status code) with "The provided expression [alias] matches an alias, specify the corresponding concrete indices instead." message.
Note that there is no specific error message for the case where wildcard expressions match one or more aliases. In fact, aliases are simply ignored when expanding wildcards for such APIs. An error is thrown only when the expression ends up matching no indices at all, and allow_no_indices is set to false. In that case the error is still the generic "404 - no such index".
403 can be confused with security. If an API doesn't support working against closed indices and closed indices are referred to in a request, that is a bad request, hence 400 is more appropriate.
Currently the `to` and `from` parameter in the `date_range` aggregation is not
parsed with the correct date field format from the mappings or the aggregation
if the argument is numeric, but always treated as a long value specifying
`epoch_millis`. This leads to problems e.g. when the format is `epoch_second`,
but the `to` and `from` are currently treated as millis.
With this change, we interpret these parameters according to the `format` of the target field.
If the `format` in the mappings is not compatible with numeric input values,
a compatible `format` (e.g. `epoch_millis`, `epoch_second`) must be specified in
the `date_range` aggregation itself, otherwise an error is thrown.
#Closes #17920
This commit reverts some changes to the shrink API ignore template
mapping REST test in favor of simply skipping the test for BWC
purposes. The complexity here is due to deprecations and lacking the
infrastructure to gracefully handle a situation like this.
This change skips the rest test in `rest-api-spec/test/indices.shrink/20_source_mapping.yml` as it currently fails because if we don’t expect the deprecation warning the normal rest tests fail because they get a warning they don’t expect but if we do expect the deprecation warning the mixed cluster tests fail because they don’t get a warning which they expected.
This commit fixes an issue with the REST test that the shrink API
ignores templates. The problem is that we have to use a BWC version of
the API (for the BWC tests) but this raises deprecation warnings. This
commit adds an expectation for these deprecation warnings.
This commit adjusts the skip version for a shrink index test that
ensures that a shrunken index ignores templates; the version can be
adjusted after the fix was backported targeting 5.6.0 and later.
Relates #25380
When parsing indices options from REST, we parse the optional parameters that are supported at REST (ignore_unavailable, allow_no_indices and expand_wildcards) and we provide the API default values for all the other (internal) options so that they are set to the new indices options while parsing. The `ignoreAliases` option was forgotten though, which means that whenever you pass in any index option at REST to the delete index API, you get to delete aliases like it was supported before (as ignoreAliases gets set to false like in all the other APIs).
Added unit tests for IndicesOptions parsing from REST parameters, and yaml tests for the delete index API.
A shrunk index should ignore anything from templates and instead take
its mappings, aliases, and settings from the original index, plus any
new settings and aliases passed in with the shrink request. This commit
causes this to be the case.
Relates #25380
Today if we search across a large amount of shards we hit every shard. Yet, it's quite
common to search across an index pattern for time based indices but filtering will exclude
all results outside a certain time range ie. `now-3d`. While the search can potentially hit
hundreds of shards the majority of the shards might yield 0 results since there is not document
that is within this date range. Kibana for instance does this regularly but used `_field_stats`
to optimize the indexes they need to query. Now with the deprecation of `_field_stats` and it's upcoming removal a single dashboard in kibana can potentially turn into searches hitting hundreds or thousands of shards and that can easily cause search rejections even though the most of the requests are very likely super cheap and only need a query rewriting to early terminate with 0 results.
This change adds a pre-filter phase for searches that can, if the number of shards are higher than a the `pre_filter_shard_size` threshold (defaults to 128 shards), fan out to the shards
and check if the query can potentially match any documents at all. While false positives are possible, a negative response means that no matches are possible. These requests are not subject to rejection and can greatly reduce the number of shards a request needs to hit. The approach here is preferable to the kibana approach with field stats since it correctly handles aliases and uses the correct threadpools to execute these requests. Further it's completely transparent to the user and improves scalability of elasticsearch in general on large clusters.
Flake ids organize bytes in such a way that ids are ordered. However, we do not
need that property and could reorganize bytes in an order that would better suit
Lucene's terms dict instead.
Some synthetic tests suggest that this change decreases the disk footprint of
the `_id` field by about 50% in many cases (see `UUIDTests.testCompression`).
For instance, when simulating the indexing of 10M docs at a rate of 10k docs
per second, the current uid generator used 20.2 bytes per document on average,
while this new generator which only puts bytes in a different order uses 9.6
bytes per document on average.
We had already explored this idea in #18209 but the attempt to share long common
prefixes had had a bad impact on indexing speed. This time I have been more
careful about putting discriminant bytes early in the `_id` in a way that
preserves indexing speed on par with today, while still allowing for better
compression.
This is a protection mechanism to prevent a single search request from
hitting a large number of shards in the cluster concurrently. If a search is
executed against all indices in the cluster this can easily overload the cluster
causing rejections etc. which is not necessarily desirable. Instead this PR adds
a per request limit of `max_concurrent_shard_requests` that throttles the number of
concurrent initial phase requests to `256` by default. This limit can be increased per request
and protects single search requests from overloading the cluster. Subsequent PRs can introduces
addiontional improvemetns ie. limiting this on a `_msearch` level, making defaults a factor of
the number of nodes or sort shards iters such that we gain the best concurrency across nodes.
The created and found fields in index and delete responses became obsolete after the introduction of the result field in index, update and delete responses (#19566).
After deprecating the created and found fields in 5.x (#19633), now they are removed.
Fixes#19630
* Adds rewrite phase to aggregations
This change adds aggregations to the rewrite performed by the `SearchSourceBuilder`. This means that `AggregationBuilder`s are able to implement a `rewrite()` method where they can return a new `AggregationBuilder` which is functionally the same but in a more primitive form. This is exactly analogous to the rewrite done by the `QueryBuilder`s.
The first aggregation to implement the rewrite are the filter and filters aggregations so they can rewrite the filters they contain.
Closes#17676
* Removes rewrite from PipelineAggregationBuilder
Rewrite is based on shard level information. Since pipeline aggregation are run in the reduce phase it doesn’t make sense to rewrite them on the shards. In fact eventually we shouldn’t be transporting them to the shards at all and should be retaining them on the coordinating node for execution in the reduce phase
* Addresses review comments
* addresses more review comments
* Fixed imports
This commit adjusts the BWC version on the bad cluster allocation
explain request test as changing the API to respond with a bad request
status instead of an internal server error status was backported to 5.x
to be included in 5.6.0.
Relates #25503
When a user requests a cluster allocation explain in a situation where
it does not make sense (for example, there are no unassigned shards), we
should consider this a bad request instead of a server error. Yet, today
by throwing an illegal state exception, these are treated as server
errors. This commit adjusts these so that they throw illegal argument
exceptions and are treated as bad requests.
Relates #25503
In #24477, a less verbose option was added to retrieve snapshot info via
GET /_snapshot/{repo}/{snapshots}. The point of adding this less
verbose option was so that if the repository is a cloud based one, and
there are many snapshots for which the snapshot info needed to be
retrieved, then each snapshot would require reading a separate snapshot
metadata file to pull out the necessary information. This can be costly
(performance and cost) on cloud based repositories, so a less verbose
option was added that only retrieves very basic information about each
snapshot that is all available in the index-N blob - requiring only one
read!
In order to display this less verbose snapshot info appropriately, logic
was added to not display those fields which could not be populated.
However, this broke integrators (e.g. ECE) that required these fields to
be present, even if empty. This commit is to return these fields in the
response, even if empty, if the verbose option is set.
Expand `/_cat/nodes` with already present information about available disk space `diskAvail` (alias: `d`, `disk`) by:
* `diskTotal` (alias `dt`): total disk space
* `diskUsed` (alias `du`): used disk space (`diskTotal - diskAvail`)
* `diskUsedPercent` (alias `dup`): used disk space percentage
Note: The available disk space is the number of bytes available to the node's Java virtual machine. The size might be smaller than the real one. That means the used disk space (percentage) is larger.
Closes#21679
This change removes the remaining explicitly specified `index.mapper.single_type`
settings from tests in order to allow the removal of the setting.
This is the already approved part of #25375 broken out to simplfiy reviews on
#25147 added the translog deletion policy but didn't enable it by default. This PR enables a default retention of 512MB (same maximum size of the current translog) and an age of 12 hours (i.e., after 12 hours all translog files will be deleted). This increases to chance to have an ops based recovery, even if the primary flushed or the replica was offline for a few hours.
In order to see which parts of the translog are committed into lucene the translog stats are extended to include information about uncommitted operations.
Views now include all translog ops and guarantee, as before, that those will not go away. Snapshotting a view allows to filter out generations that are not relevant based on a specific sequence number.
Relates to #10708
* [Analysis] Parse synonyms with the same analysis chain
Synonym Token Filter / Synonym Graph Filter tokenize synonyms with whatever tokenizer and token filters appear before it in the chain.
Close#7199
This commit removes the global caching of the field query and replaces it with
a caching per field. Each field can use a different `highlight_query` and the rewriting of
some queries (prefix, automaton, ...) depends on the targeted field so the query used for highlighting
must be unique per field.
There might be a small performance penalty when highlighting multiple fields since the query needs to be rewritten
once per highlighted field with this change.
Fixes#25171
This commit changes the BWC versions on the get mapping 404s now that
this API returning 404s when a type is missing is supported since 5.5.0.
Relates #23192
Get mappings HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for get
mappings HEAD requests, and just relying on the general mechanism that
exists for handling HEAD requests in the REST layer.
Relates #23192
This PR enables Ingest plugins to leverage processor-scoped REST
endpoints. First of which being the Grok endpoint that retrieves
Grok Patterns for users to retrieve all the built-in patterns.
Example usage: Kibana Grok Autocomplete!
When we disabled `_all` by default for indices created in 6.0, we missed adding
a layer that would handle the situation where `_all` was not enabled in 5.x and
then the cluster was updated to 6.0, this means that when the cluster was
updated the `_all` field would be disabled for 5.x indices and field values
would not be added to the `_all` field.
This adds a compatibility layer for 5.x indices where we treat the default
enabled value for the `_all` field to be `true` if unset on 5.x indices.
Resolves#25068
Previously this would output:
```
GET /test-1/_mappings
{ }
```
And after this change:
```
GET /test-1/_mappings
{
"test-1": {
"mappings": {}
}
}
```
To bring parity back to the REST output after #24723.
Relates to #25090
Previously in #24723 we changed the `_alias` API to not go through the
`RestGetIndicesAction` endpoint, instead creating a `RestGetAliasesAction` that
did the same thing.
This changes the formatting so that it matches the old formatting of the
endpoint, before:
```
GET /test-1/_alias
{ }
```
And after this change:
```
GET /test-1/_alias
{
"test-1": {
"aliases": {}
}
}
```
This is related to #25090
This commit refactors the query phase in order to be able
to automatically detect queries that can be early terminated.
If the index sort matches the query sort, the top docs collection is early terminated
on each segment and the computing of the total number of hits that match the query is delegated to a simple TotalHitCountCollector.
This change also adds a new parameter to the search request called `track_total_hits`.
It indicates if the total number of hits that match the query should be tracked.
If false, queries sorted by the index sort will not try to compute this information and
and will limit the collection to the first N documents per segment.
Aggregations are not impacted and will continue to see every document
even when the index sort matches the query sort and `track_total_hits` is false.
Relates #6720
This change skips rest tests that use mutlitple types if the cluster
is a pure 6.x cluster. This allows all indics to be created with a version
less than 6.0 and that means we can safely use the `mapping.single_type` setting.
Relates to #24961
Previous work modified the status code on the get aliases API when an
alias is missing so that these requests 404 now. This change was also
backported to 5.5 so we can adjust the skips to skip everything before
5.5.0.
Previously the HEAD and GET aliases endpoints were misaigned in
behavior. The HEAD verb would 404 if any aliases are missing while the
GET verb would not if any aliases existed. When HEAD was aligned with
GET, this broke the previous usage of HEAD to serve as an existence
check for aliases. It is the behavior of GET that is problematic here
though, if any alias is missing the request should 404. This commit
addresses this by modifying the behavior of GET to behave in this
way. This fixes the behavior for HEAD to also 404 when aliases are
missing.
Relates #25043
REST handlers that require a body will throw an an ElasticsearchParseException "request body required".
REST handlers that require a body OR source param will throw an ElasticsearchParseException "request body or source param required".
Replaced asserts in BulkRequest parsing code with a more descriptive IllegalArgumentException if the line contains an empty object.
Updated bulk REST test to verify an empty action line is rejected properly.
Updated BulkRequestTests with randomized testing for an empty action line.
Used try-with-resouces for XContentParser in AbstractBulkByQueryRestHandler.
This removes the parsing of things like `GET /idx/_aliases,_mappings`, instead,
a user must choose between retriving all index metadata with `GET /idx`, or only
a specific form such as `GET /idx/_settings`.
Relates to (and is a prerequisite of) #24437
* Adds nodes usage API to monitor usages of actions
The nodes usage API has 2 main endpoints
/_nodes/usage and /_nodes/{nodeIds}/usage return the usage statistics
for all nodes and the specified node(s) respectively.
At the moment only one type of usage statistics is available, the REST
actions usage. This records the number of times each REST action class is
called and when the nodes usage api is called will return a map of rest
action class name to long representing the number of times each of the action
classes has been called.
Still to do:
* [x] Create usage service to store usage statistics
* [x] Record usage in REST layer
* [x] Add Transport Actions
* [x] Add REST Actions
* [x] Tests
* [x] Documentation
* Rafactors UsageService so counts are done by the handlers
* Fixing up docs tests
* Adds a name to all rest actions
* Addresses review comments
This commit adds an optional `context` url parameter to the put stored
script request. When a context is specified, the script is compiled
against that context before storing, as a validation the script will
work when used in that context.
* SignificantText aggregation - like significant_terms but doesn’t require fielddata=true, recommended used with `sampler` agg to limit expense of tokenizing docs and takes optional `filter_duplicate_text`:true setting to avoid stats skew from repeated sections of text in search results.
Closes#23674
This commit renames all rest test files to use the .yml extension
instead of .yaml. This way the extension used within all of
elasticsearch for yaml is consistent.
* Add parent-join module
This change adds a new module named `parent-join`.
The goal of this module is to provide a replacement for the `_parent` field but as a first step this change only moves the `has_child`, `has_parent` queries and the `children` aggregation to this module.
These queries and aggregations are no longer in core but they are deployed by default as a module.
Relates #20257
This commit adds support for histogram and date_histogram agg compound order by refactoring and reusing terms agg order code. The major change is that the Terms.Order and Histogram.Order classes have been replaced/refactored into a new class BucketOrder. This is a breaking change for the Java Transport API. For backward compatibility with previous ES versions the (date)histogram compound order will use the first order. Also the _term and _time aggregation order keys have been deprecated; replaced by _key.
Relates to #20003: now that all these aggregations use the same order code, it should be easier to move validation to parse time (as a follow up PR).
Relates to #14771: histogram and date_histogram aggregation order will now be validated at reduce time.
Closes#23613: if a single BucketOrder that is not a tie-breaker is added with the Java Transport API, it will be converted into a CompoundOrder with a tie-breaker.
Currently, the get snapshots API (e.g. /_snapshot/{repositoryName}/_all)
provides information about snapshots in the repository, including the
snapshot state, number of shards snapshotted, failures, etc. In order
to provide information about each snapshot in the repository, the call
must read the snapshot metadata blob (`snap-{snapshot_uuid}.dat`) for
every snapshot. In cloud-based repositories, this can be expensive,
both from a cost and performance perspective. Sometimes, all the user
wants is to retrieve all the names/uuids of each snapshot, and the
indices that went into each snapshot, without any of the other status
information about the snapshot. This minimal information can be
retrieved from the repository index blob (`index-N`) without needing to
read each snapshot metadata blob.
This commit enhances the get snapshots API with an optional `verbose`
parameter. If `verbose` is set to false on the request, then the get
snapshots API will only retrieve the minimal information about each
snapshot (the name, uuid, and indices in the snapshot), and only read
this information from the repository index blob, thereby giving users
the option to retrieve the snapshots in a repository in a more
cost-effective and efficient manner.
Closes#24288
Now that indices have a single type by default, we can move to the next step
and identify documents using their `_id` rather than the `_uid`.
One notable change in this commit is that I made deletions implicitly create
types. This helps with the live version map in the case that documents are
deleted before the first type is introduced. Otherwise there would be no way
to differenciate `DELETE index/foo/1` followed by `PUT index/foo/1` from
`DELETE index/bar/1` followed by `PUT index/foo/1`, even though those are
different if versioning is involved.
If a node in version >= 5.3 acts as a coordinating node during a scroll request that targets a single shard, the scroll may return the same documents over and over iff the targeted shard is hosted by a node with a version <= 5.3.
The nodes in this version will advance the scroll only if the search_type has been set to `query_and_fetch` though this search type has been removed in 5.3.
This change handles this situation by adding the removed search_type in the request that targets a node in version <= 5.3.
If a field caps request contains a field name that doesn't exist in all indices
the response will be partial and we hide an NPE. The NPE is now fixed but we still
have the problem that we don't pass on errors on the shard level to the user. This will
be fixed in a followup.
`_search_shards`API today only returns aliases names if there is an alias
filter associated with one of them. Now it can be useful to see which aliases
have been expanded for an index given the index expressions. This change also includes non-filtering aliases even without a filtering alias being present.
Zachary Tong
Boaz Leskes
Armin Braun
Jim Ferenczi
Christoph Büscher
Mayya Sharipova
Tal Levy
Jim Ferenczi
Alan Woodward
Sohaib Iftikhar
Julie Tibshirani
Nik Everett
Luca Cavanna
Vladimir Dolzhenko
Simon Willnauer
Martijn van Groningen
Lee Hinman
Michael Basnight
Tom Callahan
David Roberts
Adrien Grand
Colin Goodheart-Smithe
olcbean
Jason Tedor
Zachary Tong
Tanguy Leroux
Chris Earle
Alexander Reelsen
Ke Li
Nhat Nguyen
Johnny Marnell
Paul Sanwald
Spencer
Sergey Galkin
Andrew Odendaal
Justin Wyer
markharwood
Igor Motov
Clinton Gormley
Stuart Cam
Christoph Büscher
Christoph Büscher
Yannick Welsch
olcbean
Nick Lang
Russ Cam
Nhat
Honza Král
Nhat
David Turner
Glen Smith
Karel Minarik
Karel Minarik
Alexander Kazakov
Christoph Büscher
Jack Conradson
Ryan Ernst
Jun Ohtani
Ali Beyad
Andreas Gebhardt
Lee Hinman
Sergey Novikov
jaymode
Alex Benusovich
Matt Weber
Isabel Drost-Fromm