NOTE: The result of `?.` and `?:` can't be assigned to primitives. So
`int[] someArray = null; int l = someArray?.length` and
`int s = params.size ?: 100` don't work. Do
`def someArray = null; def l = someArray?.length` and
`def s = params.size ?: 100` instead.
Relates to #21748
* Scripting: Remove groovy scripting language
Groovy was deprecated in 5.0. This change removes it, along with the
legacy default language infrastructure in scripting.
Today we eagerly resolve unicast hosts. This means that if DNS changes,
we will never find the host at the new address. Moreover, a single host
failng to resolve causes startup to abort. This commit introduces lazy
resolution of unicast hosts. If a DNS entry changes, there is an
opportunity for the host to be discovered. Note that under the Java
security manager, there is a default positive cache of infinity for
resolved hosts; this means that if a user does want to operate in an
environment where DNS can change, they must adjust
networkaddress.cache.ttl in their security policy. And if a host fails
to resolve, we warn log the hostname but continue pinging other
configured hosts.
When doing DNS resolutions for unicast hostnames, we wait until the DNS
lookups timeout. This appears to be forty-five seconds on modern JVMs,
and it is not configurable. If we do these serially, the cluster can be
blocked during ping for a lengthy period of time. This commit introduces
doing the DNS lookups in parallel, and adds a user-configurable timeout
for these lookups.
Relates #21630
You can use `Debug.explain(someObject)` in painless to throw an
`Error` that can't be caught by painless code and contains an
object's class. This is useful because painless's sandbox doesn't
allow you to call `someObject.getClass()`.
Closes#20263
Implements a null coalescing operator in painless that looks like `?:`. This form was chosen to emulate Groovy's `?:` operator. It is different in that it only coalesces null values, instead of Groovy's `?:` operator which coalesces all falsy values. I believe that makes it the same as Kotlin's `?:` operator. In other languages this operator looks like `??` (C#) and `COALESCE` (SQL) and `:-` (bash).
This operator is lazy, meaning the right hand side is only evaluated at all if the left hand side is null.
This change was reverted after it caused random test failures. This was
due to a copy/paste error in the original PR which caused the mock
version of ClusterInfoService to be used whenever the mock *ZenPing* was
used, and the real ClusterInfoService to be used when MockZenPing was
not used.
Null safe dereferences make handling null or missing values shorter.
Compare without:
```
if (ctx._source.missing != null && ctx._source.missing.foo != null) {
ctx._source.foo_length = ctx.source.missing.foo.length()
}
```
To with:
```
Integer length = ctx._source.missing?.foo?.length();
if (length != null) {
ctx._source.foo_length = length
}
```
Combining this with the as of yet unimplemented elvis operator allows
for very concise defaults for nulls:
```
ctx._source.foo_length = ctx._source.missing?.foo?.length() ?: 0;
```
Since you have to start somewhere, we started with null safe dereferenes.
Anyway, this is a feature borrowed from groovy. Groovy allows writing to
null values like:
```
def v = null
v?.field = 'cat'
```
And the writes are simply ignored. Painless doesn't support this at this
point because it'd be complex to implement and maybe not all that useful.
There is no runtime cost for this feature if it is not used. When it is
used we implement it fairly efficiently, adding a jump rather than a
temporary variable.
This should also work fairly well with doc values.
Refactored ScriptType to clean up some of the variable and method names. Added more documentation. Deprecated the 'in' ParseField in favor of 'stored' to match the indexed scripts being replaced by stored scripts.
Adds support for indexing into lists and arrays with negative
indexes meaning "counting from the back". So for if
`x = ["cat", "dog", "chicken"]` then `x[-1] == "chicken"`.
This adds an extra branch to every array and list access but
some performance testing makes it look like the branch predictor
successfully predicts the branch every time so there isn't a
in execution time for this feature when the index is positive.
When the index is negative performance testing showed the runtime
is the same as writing `x[x.length - 1]`, again, presumably thanks
to the branch predictor.
Those performance metrics were calculated for lists and arrays but
`def`s get roughly the same treatment though instead of inlining
the test they need to make a invoke dynamic so we don't screw up
maps.
Closes#20870
It is important that folks understand that snapshot/restore isn't
for archiving. It is appropriate for backup and disaster recovery
but not for archival over long periods of time because of version
incompatibility.
Closes#20866
This change proposes the removal of all non-tcp transport implementations. The
mock transport can be used by default to run tests instead of local transport that has
roughly the same performance compared to TCP or at least not noticeably slower.
This is a master only change, deprecation notice in 5.x will be committed as a
separate change.
* plugins/discovery-azure-class.asciidoc
* reference/cluster.asciidoc
* reference/modules/cluster/misc.asciidoc
* reference/modules/indices/request_cache.asciidoc
After this is merged there will be no unconvereted snippets outside
of `reference`.
Related to #18160
`cluster.routing.allocation.cluster_concurrent_rebalance` setting,
clarifying in which shard allocation situations the rebalance limit
takes effect.
Closes#20529
In 7560101ec7, the Elasticsearch logger
names were modified to be their fully-qualified class name (with some
exceptions for special loggers like the slow logs and the transport
tracer). This commit updates the docs accordingly.
Relates #20475
>However, the version of the new cluster should be the same or newer than the cluster that was
Afaik, you can't restore a snapshot to a newer cluster that is not consecutively newer (i.e. can't restore 1.x snapshot to a 5.x cluster). This is to clarify the statement above moving forward.
When compiling many dynamically changing scripts, parameterized
scripts (<https://www.elastic.co/guide/en/elasticsearch/reference/master/modules-scripting-using.html#prefer-params>)
should be preferred. This enforces a limit to the number of scripts that
can be compiled within a minute. A new dynamic setting is added -
`script.max_compilations_per_minute`, which defaults to 15.
If more dynamic scripts are sent, a user will get the following
exception:
```json
{
"error" : {
"root_cause" : [
{
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
],
"type" : "search_phase_execution_exception",
"reason" : "all shards failed",
"phase" : "query",
"grouped" : true,
"failed_shards" : [
{
"shard" : 0,
"index" : "i",
"node" : "a5V1eXcZRYiIk8lecjZ4Jw",
"reason" : {
"type" : "general_script_exception",
"reason" : "Failed to compile inline script [\"aaaaaaaaaaaaaaaa\"] using lang [painless]",
"caused_by" : {
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
}
}
],
"caused_by" : {
"type" : "general_script_exception",
"reason" : "Failed to compile inline script [\"aaaaaaaaaaaaaaaa\"] using lang [painless]",
"caused_by" : {
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
}
},
"status" : 500
}
```
This also fixes a bug in `ScriptService` where requests being executed
concurrently on a single node could cause a script to be compiled
multiple times (many in the case of a powerful node with many shards)
due to no synchronization between checking the cache and compiling the
script. There is now synchronization so that a script being compiled
will only be compiled once regardless of the number of concurrent
searches on a node.
Relates to #19396
GeoDistance is implemented using a crazy enum that causes issues with the scripting modules. This commit moves all distance calculations to arcDistance and planeDistance static methods in GeoUtils. It also removes unnecessary distance helper methods from ScriptDocValues.GeoPoints.
* Update gateway.asciidoc
Added a note to clarify that, in cases where nodes in a cluster have different setting, the node that is the elected master takes precedence over anything else.
* Update gateway.asciidoc
Updated as per @bleskes's comments
This adds new circuit breaking with the "request" breaker, which adds
circuit breaks based on the number of buckets created during
aggregations. It consists of incrementing during AggregatorBase creation
This also bumps the REQUEST breaker to 60% of the JVM heap now.
The output when circuit breaking an aggregation looks like:
```json
{
"shard" : 0,
"index" : "i",
"node" : "a5AvjUn_TKeTNYl0FyBW2g",
"reason" : {
"type" : "exception",
"reason" : "java.util.concurrent.ExecutionException: QueryPhaseExecutionException[Query Failed [Failed to execute main query]]; nested: CircuitBreakingException[[request] Data too large, data for [<agg [otherthings]>] would be larger than limit of [104857600/100mb]];",
"caused_by" : {
"type" : "execution_exception",
"reason" : "QueryPhaseExecutionException[Query Failed [Failed to execute main query]]; nested: CircuitBreakingException[[request] Data too large, data for [<agg [myagg]>] would be larger than limit of [104857600/100mb]];",
"caused_by" : {
"type" : "circuit_breaking_exception",
"reason" : "[request] Data too large, data for [<agg [otherthings]>] would be larger than limit of [104857600/100mb]",
"bytes_wanted" : 104860781,
"bytes_limit" : 104857600
}
}
}
}
```
Relates to #14046
Previously if the size of the search request was greater than zero we would not cache the request in the request cache.
This change retains the default behaviour of not caching requests with size > 0 but also allows the `request_cache=true` query parameter
to enable the cache for requests with size > 0
Rename `fields` to `stored_fields` and add `docvalue_fields`
`stored_fields` parameter will no longer try to retrieve fields from the _source but will only return stored fields.
`fields` will throw an exception if the user uses it.
Add `docvalue_fields` as an adjunct to `fielddata_fields` which is deprecated. `docvalue_fields` will try to load the value from the docvalue and fallback to fielddata cache if docvalues are not enabled on that field.
Closes#18943
As discussed at https://github.com/elastic/elasticsearch-cloud-azure/issues/91#issuecomment-229113595, we know that the current `discovery-azure` plugin only works with Azure Classic VMs / Services (which is somehow Legacy now).
The proposal here is to rename `discovery-azure` to `discovery-azure-classic` in case some users are using it.
And deprecate it for 5.0.
Closes#19144.
These are useful methods in groovy that give you control over
the replacements used:
```
'the quick brown fox'.replaceAll(/[aeiou]/,
m -> m.group().toUpperCase(Locale.ROOT))
```
`stored_fields` parameter will no longer try to retrieve fields from the _source but will only return stored fields.
`fields` will throw an exception if the user uses it.
Add `docvalue_fields` as an adjunct to `fielddata_fields` which is deprecated. `docvalue_fields` will try to load the value from the docvalue and fallback to fielddata cache if docvalues are not enabled on that field.
Closes#18943
ES only sends a non-200 response all shards fail but we should
fail the tests generated by docs if any of them fail.
Depending on the outcome of #18978 this might be a temporary
workaround.
Painless: Add support for //m
Painless: Add support for //s
Painless: Add support for //i
Painless: Add support for //u
Painless: Add support for //U
Painless: Add support for //l
This means "literal" and is exposed for completeness sake with
the java api.
Painless: Add support for //c
c enables Java's CANON_EQ (canonical equivalence) flag which makes
unicode characters that are canonically equal match. Java's javadoc
gives "a\u030A" being equal to "\u00E5". That is that the "a" code
point followed by the "combining ring above" code point is equal to
the "a with combining ring above" code point.
Update docs and add multi-flag test
Whitelist most of the Pattern class.
Adds support for the find operator (=~) and the match operator (==~)
to painless's regexes. Also whitelists most of the Matcher class and
documents regex support in painless.
The find operator (=~) returns a boolean that is the result of building
a matcher on the lhs with the Pattern on the RHS and calling `find` on
it. Use it like this:
```
if (ctx._source.last =~ /b/)
```
The match operator (==~) returns boolean like find but instead of calling
`find` on the Matcher it calls `matches`.
```
if (ctx._source.last ==~ /[^aeiou].*[aeiou]/)
```
Finally, if you want the actual matcher you do:
```
Matcher m = /[aeiou]/.matcher(ctx._source.last)
```
Thread pool settings are no longer dynamically updatable since
da74323141. This commit removes a leftover
note from the thread pool module docs that incorrectly states that
thread pool settings are dynamically updatable.
This commit refactors the handling of thread pool settings so that the
individual settings can be registered rather than registering the top
level group. With this refactoring, individual plugins must now register
their own settings for custom thread pools that they need, but a
dedicated API is provided for this in the thread pool module. This
commit also renames the prefix on the thread pool settings from
"threadpool" to "thread_pool". This enables a hard break on the settings
so that:
- some of the settings can be given more sensible names (e.g., the max
number of threads in a scaling thread pool is now named "max" instead
of "size")
- change the soft limit on the number of threads in the bulk and
indexing thread pools to a hard limit
- the settings names for custom plugins for thread pools can be
prefixed (e.g., "xpack.watcher.thread_pool.size")
- remove dynamic thread pool settings
Relates #18674
This commit removes the ability to specify a custom plugins
path. Instead, the plugins path will always be a subdirectory called
"plugins" off of the home directory.
The syntax highlighter only supports [source,js].
Also adds a check to the rest test generator that runs during
the build that'll fail the build if it sees `[source,json]`.
Today when parsing settings during bootstrap, we add a system property
for every Elasticsearch setting. Additionally, settings can be set via
system properties. This commit simplifies this situation.
- settings are no longer propogated to system properties
- system properties can not be used to set settings
- the "es." prefix on settings is no longer required (nor permitted)
- test logging has a dedicated system property (tests.logger.level)
Relates #18198
This removes all the mentions of the sandbox from the script engine
services and permissions model. This means that the following settings
are no longer supported:
```yaml
script.inline: sandbox
script.stored: sandbox
```
Instead, only a `true` or `false` value can be specified.
Since this would otherwise break the default-allow parameter for
languages like expressions, painless, and mustache, all script engines
have been updated to have individual settings, for instance:
```yaml
script.engine.groovy.inline: true
```
Would enable all inline scripts for groovy. (they can still be
overridden on a per-operation basis).
Expressions, Painless, and Mustache all default to `true` for inline,
file, and stored scripts to preserve the old scripting behavior.
Resolves#17114
Remove performance hack for accessing a document's fields, its not needed.
Add support for accessing is-getter methods like List.isEmpty() as .empty
Closes#18201
This gives better coverage and consistency with the scripting APIs, by
whitelisting the primary search scripting API classes and using them instead
of only Map and List methods.
For example, accessing fields can now be done with `.value` instead of `.0`
because `getValue()` is whitelisted. For now, access to a document's fields in
this way (loads) are fast-pathed in the code, to avoid dynamic overhead.
Access to geo fields and geo distance functions is now supported.
TODO: date support (e.g. whitelist ReadableDateTime methods as a start)
TODO: improve docs (like expressions and groovy have for document's fields)
TODO: remove fast-path hack
Closes#18169
Squashed commit of the following:
commit ec9f24b2424891a7429bb4c0a03f9868cba0a213
Author: Robert Muir <rmuir@apache.org>
Date: Thu May 5 17:59:37 2016 -0400
cutover to <Def> instead of <Object> here
commit 9edb1550438acd209733bc36f0d2e0aecf190ecb
Author: Robert Muir <rmuir@apache.org>
Date: Thu May 5 17:03:02 2016 -0400
add fast-path for docvalues field loads
commit f8e38c0932fccc0cfa217516130ad61522e59fe5
Author: Robert Muir <rmuir@apache.org>
Date: Thu May 5 16:47:31 2016 -0400
Painless: add fielddata accessors (.value/.values/.distance()/etc)
Adds infrastructure so `gradle :docs:check` will extract tests from
snippets in the documentation and execute the tests. This is included
in `gradle check` so it should happen on CI and during a normal build.
By default each `// AUTOSENSE` snippet creates a unique REST test. These
tests are executed in a random order and the cluster is wiped between
each one. If multiple snippets chain together into a test you can annotate
all snippets after the first with `// TEST[continued]` to have the
generated tests for both snippets joined.
Snippets marked as `// TESTRESPONSE` are checked against the response
of the last action.
See docs/README.asciidoc for lots more.
Closes#12583. That issue is about catching bugs in the docs during build.
This catches *some* bugs in the docs during build which is a good start.
* Reorganize scripting documentation
* Further changes to tidy up scripting docs
Closes#18116
* Add note about .lat/lon potentially returning null
* Added .value to expressions example
* Fixed two bad ASCIIDOC links
With this commit we compress HTTP responses provided the client
supports it (as indicated by the HTTP header 'Accept-Encoding').
We're also able to process compressed HTTP requests if needed.
The default compression level is lowered from 6 to 3 as benchmarks
have indicated that this reduces query latency with a negligible
increase in network traffic.
Closes#7309
This commit actually bounds the size of the generic thread pool. The
generic thread pool was of type cached, a thread pool with an unbounded
number of workers and an unbounded work queue. With this commit, the
generic thread pool is now of type scaling. As such, the cached thread
pool type has been removed. By default, the generic thread pool is
constructed with a core pool size of four, a max pool size of 128 and
idle workers can be reaped after a keep-alive time of thirty seconds
expires. The work queue for this thread pool remains unbounded.
With this commit we limit the size of all in-flight requests on
transport level. The size is guarded by a circuit breaker and is
based on the content size of each request.
By default we use 100% of available heap meaning that the parent
circuit breaker will limit the maximum available size. This value
can be changed by adjusting the setting
network.breaker.inflight_requests.limit
Relates #16011
This commit adds a new configuration file jvm.options to centralize and
simplify management of JVM options. This separates the configuration of
the JVM from the packaging scripts (bin/elasticsearch*, bin/service.bat,
and init.d/elasticsearch) simplifying end-user operational management of
custom JVM options.
We currently have a `discovery.zen.master_election.filter_client` setting that control whether their ping responses are ignored for master election (which is the current default). With the push to treat client nodes as normal nodes (and promote the transport/rest clients for client work), this should be changed. This commit remove this setting and it's companion `discovery.zen.master_election.filter_data` setting (currently defaulting to false) in favor of singe `discovery.zen.master_election.ignore_non_master_pings` setting with more intuitive name (defaulting to false).
Resolves#17325Closes#17329
In #17198, we removed suggest transport action, which
used the `suggest` threadpool to execute requests. Now
`suggest` threadpool is unused and suggest requests are
executed on the `search` threadpool.
Today, certain bootstrap properties are set and read via system
properties. This action-at-distance way of managing these properties is
rather confusing, and completely unnecessary. But another problem exists
with setting these as system properties. Namely, these system properties
are interpreted as Elasticsearch settings, not all of which are
registered. This leads to Elasticsearch failing to startup if any of
these special properties are set. Instead, these properties should be
kept as local as possible, and passed around as method parameters where
needed. This eliminates the action-at-distance way of handling these
properties, and eliminates the need to register these non-setting
properties. This commit does exactly that.
Additionally, today we use the "-D" command line flag to set the
properties, but this is confusing because "-D" is a special flag to the
JVM for setting system properties. This creates confusion because some
"-D" properties should be passed via arguments to the JVM (so via
ES_JAVA_OPTS), and some should be passed as arguments to
Elasticsearch. This commit changes the "-D" flag for Elasticsearch
settings to "-E".
Currently we suggesting users create a Node (using NodeBuilder in 2.x) to have a client that is capable of keeping up-to-date information. This is generally a bad idea as it means elasticsearch has no control over eg max heap size or gc settings, and is also problematic for users because they must deal with dependency collisions (and in 2.x+ dependencies of elasticsearch itself).
A better alternative, and what we should document, is to run a local elasticsearch server using bin/elasticsearch, and then use the transport client to connect to that local node. This local connection is virtually free, and allows the client code to be completely isolated from the elasticsearch process. Plugins are then also easy to deal with: just install them in elasticsearch as usual.
Related to #16679
2.x has show so far that running with security manager is the way to go.
This commit make this non-optional. Users that need to pass their own rules
can still do this via the system configuration for the security manager. They
can even opt out of all security that way.
This setting was missing from the docs, so I added it. However, I also
completely rewrote the nodes documentation page because it was mostly
talking about client nodes with some issues, without ever discussing
master nodes, or even tribe nodes. All nodes should be listed on a
"nodes" documentation page.
Fixes#15903Fixed#14429
Today we throttle recoveries only for incoming recoveries. Nodes that have a lot
of primaries can get overloaded due to too many recoveries. To still keep that at bay
we limit the number of threads that are sending files to the target to overcome this problem.
The right solution here is to also throttle the outgoing recoveries that are today unbounded on
the master and don't start the recovery until we have enough resources on both source and target nodes.
The concurrency aspects of the recovery source also added a lot of complexity and additional threadpools
that are hard to configure. This commit removes the concurrent streamns notion completely and sends files
in the thread that drives the recovery simplifying the recovery code considerably.
Outgoing recoveries are not throttled on the master via a allocation decider.
This makes some minor improvements (does not fix all problems!)
It reorders unicast disco in elasticsearch.yml to be right after the network host,
for better locality.
It removes the warning (unreleased) about publish addresses, lets try to really discourage setting
that unless you need to (behind a proxy server). Most people should be fine with `network.host`
Finally it reorganizes the network docs page a bit:
We add a table of 4 "basic" settings at the very beginning:
* network.host
* discovery.zen.ping.unicast.hosts
* http.port
* transport.tcp.port
The first two being the most important, which addresses to bind and talk to, and the other two
being the port numbers.
The rest of the stuff I tried to simplify and reorder under "advanced" headers.
This is just a quick stab, I still think we need more effort into this thing, but we gotta start somewhere.
This commit forbids the changing of thread pool types for any thread
pool. The motivation here is that these are expert settings with
little practical advantage.
Closes#14294, relates #2509, relates #2858, relates #5152
* Allow for multiple host specifications (e.g. _en0_,192.168.1.2,_site_).
* Add _site_ and _global_ scopes as counterparts to _local_.
* Warn on heuristic selection of publish address.
* Remove the arbitrary _non_loopback_ setting.
Closes#13954
When running in GCE platform, an instance has access to:
http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/0/ip
Which gives back the private IP address, for example `10.240.0.2`.
http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/0/externalIp
Gives back the public Ip address, for example `130.211.108.21`.
As we have for `ec2`, we can support new network host settings:
* `_gce:privateIp:X_`: The private IP address of the machine for a given network interface.
* `_gce:hostname_`: The hostname of the machine.
* `_gce_`: Same as `_gce:privateIp:0_` (recommended).
Closes#13605.
Closes#13590.
BTW resolveIfPossible now throws IOException so code is also updated for ec2 discovery and
some basic tests have been added.
With 2.0, we now bind to `localhost` by default instead of binding to the network card and use its IP address.
When the discovery plugin gets from AWS API the list of nodes that should form the cluster, this list is pinged then. But as each node is bound to `localhost`, ping does not get an answer and the node elects itself as the master node.
`network.host` must be set.
Closes#13589.
Until now we had a cloud-azure plugin which is providing 3 distinct features:
* discovery on Azure
* snapshot/restore on Aure
* SMB store
This commit splits the plugin by feature so people can use either one or the other or both features.
Doc is updated accordingly.
Until now we had a cloud-aws plugin which is providing 2 disctinct features:
* discovery on EC2
* snapshot/restore on S3
This commit splits the plugin by feature so people can use either one or the other or both features.
Doc is updated accordingly.
Prior to 2.0 we summed up the available space on all disk on a node
due to the raid-0 like behavior. Now we don't do this anymore and use the
min & max disk space to make decisions.
Closes#13106
Multicast has known issues (see #12999 and #12993). This change moves
multicast into a plugin, and deprecates it in the docs. It also allows
for plugging in multiple zen ping implementations.
closes#13019
Fix unicast discovery to work when a host has multiple addresses.
Ban dangerous methods in java.net with forbidden APIs.
Fix ipv6 bugs and formatting of network addresses everywhere.
Closes#12999Closes#12993
Squashed commit of the following:
commit 6c1aa001d091c5cf25212a53dc701fb704337f1e
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 14:25:43 2015 -0400
Fix these to be correct with addresses just in case
commit 648215627e84abf58a71400e7dc9ae775efb71d6
Merge: d00561b 41d8fbe
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 13:23:09 2015 -0400
Merge branch 'master' into unicast_all_the_way_down
commit d00561b76fd1aa5850699f7901f3dae3d4d402b7
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 16:38:50 2015 +0200
limit local ports to 5 in UnicastZenPing
commit e2e15c594006746cbe24432694294a71cc99deb8
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 10:32:47 2015 -0400
fix port limiting
commit 10153cb7adadda81a1f482445e703836b65cf5e2
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 10:18:37 2015 -0400
don't serialize scopeids: that's broken
commit 2aa63d43db2baec68a2e9bc227cfeb85dfeb4f83
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 16:06:51 2015 +0200
restore @Network
commit c840f1d1ef438826ae1ecfd5e45942a0e30dc9c0
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 16:02:30 2015 +0200
Use NetworkAddress.formatAddress where applicable in plugins
commit 374ce878852b35d626b7a29c8c4773545b0e9ddd
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 15:34:06 2015 +0200
Use NetworkAddress.formatAddress where applicable
commit e7a606d63f1bc43c1b62b6e17adf707c76d43a15
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 10:17:57 2015 +0200
Add @Multicast annotation to disable multicast tests by default.
We only run multicast tests now when we explicitly state it. A working
multicast env is required which is not always the case.
commit 2d7d2d0347179696ab41f71f048b13305014c85b
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 09:51:28 2015 +0200
Remove extra check for local mode in InternalTestCluster
commit dda59ac39aa136d4687b9274c2692cd77f8b8f66
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 09:37:03 2015 +0200
Handle node mode across entire test cluster
We used static methods reading sys properties to define the node mode
per cluster. this had lots of problems when tests couldn't cope with
mixed or only local mode. Now we are passing it down to the cluster from the test
which allows to @SuppressNetworkMode / @SupressLocalMode on the test to force
consistent node configurations.
commit 058197b7a408318995c88ce7f6762e32348de0de
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 03:19:14 2015 -0400
really ban InetSocketAddress's trappy method and break build and go to sleep, sorry
commit ac8779185aee1e17e6f5a81766290fdfc9c603ba
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 03:16:52 2015 -0400
Ban methods that might surprisingly cause DNS lookups
commit e64fe3dff2b11503e5f2831eb9863d64f56c5538
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 02:59:05 2015 -0400
Add unit test
commit f15434f20fb1a3691b1cc16028597d8fae937e05
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 02:39:02 2015 -0400
fix ipv6 formatting bugs
commit 05c2c74098052c75fbb79ea1818a295ef2e03e30
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 02:12:05 2015 -0400
format addresses correctly so I can actually read what comes out of our logs and stats apis
commit 4f9389dcf1e8925f23153c5eb271b4ce2294dbaf
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 21:26:52 2015 -0400
ban dangerous methods in java.net
commit 6aacd4d9925f324903d1d099a6cf5f862aeaf677
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 20:59:24 2015 -0400
ban lenient method
commit f466a842c60163d1f4554bdce8a4163edb534c2c
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 00:29:00 2015 +0200
fix tests to not mix local transport and zen unicast disco
commit 0de007a33b33fb68cf85cd86db4ca4f8ce10bbc9
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 00:10:07 2015 +0200
fix tests to not mix local transport and zen unicast disco
commit 539f6ca6e5137e0d496239adc8684688dedcc824
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 00:02:01 2015 +0200
fix tests to not mix local transport and zen unicast disco
commit 004c2881b25467f332acc8c9f9e92b1f0f9d314e
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 17:51:45 2015 -0400
Fix multinode
commit 54113af325ce31571811c49fdaae89d5687be4ba
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 17:36:45 2015 -0400
fix integration tests
commit 0156a77a56319d6b9737ec6a531992052e50bd59
Author: Simon Willnauer <simonw@apache.org>
Date: Wed Aug 19 23:32:18 2015 +0200
enable multicast in MulticastZenPingIT.java
commit 1791caa35da853ce0122485fa3fd4674c671ec6e
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 17:23:16 2015 -0400
Fix constant
commit 22820b53e0b2dc9fd47145c2bc29ce912a8fd484
Author: Simon Willnauer <simonw@apache.org>
Date: Wed Aug 19 22:59:09 2015 +0200
give it some extra ids for local transport crazyness
commit b2138fafa94a8a085813fd48356df63e57ade5b3
Author: Simon Willnauer <simonw@apache.org>
Date: Wed Aug 19 22:51:42 2015 +0200
pass on local addresses from configured transport rather than hard code IP addresses
commit 1bf5de1f457b081e0ce262b57d2b55d39c434156
Author: Simon Willnauer <simonw@apache.org>
Date: Wed Aug 19 22:04:31 2015 +0200
fix PluggableTransportModuleIT.java to use local disco and detach port limit for node local disco
commit b6706eddfa04c43947c16551359ae98a463d34aa
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 14:16:03 2015 -0400
Default to unicast discovery, with default host list of 127.0.0.1, [::1]
When elasticsearch is configured by interface (or default: loopback interfaces),
bind to all addresses on the interface rather than an arbitrary one.
If the publish address is not specified, default it from the bound addresses
based on the following sort ordering:
* ipv4/ipv6 (java.net.preferIPv4Stack, defaults to true)
* ordinary addresses
* site-local addresses
* link local addresses
* loopback addresses
One one address is published, and multicast is still always over ipv4: these
need to be future improvements.
Closes#12906Closes#12915
Squashed commit of the following:
commit 7e60833312f329a5749f9a256b9c1331a956d98f
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 14:45:33 2015 -0400
fix java 7 compilation oops
commit c7b9f3a42058beb061b05c6dd67fd91477fd258a
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 14:24:16 2015 -0400
Cleanup/fix logic around custom resolvers
commit bd7065f1936e14a29c9eb8fe4ecab0ce512ac08e
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 13:29:42 2015 -0400
Add some unit tests for utility methods
commit 0faf71cb0ee9a45462d58af3d1bf214e8a79347c
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 12:11:48 2015 -0400
localhost all the way down
commit e198bb2bc0d1673288b96e07e6e6ad842179978c
Merge: b55d092 b93a75f
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 12:05:02 2015 -0400
Merge branch 'master' into network_cleanup
commit b55d092811d7832bae579c5586e171e9cc1ebe9d
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 12:03:03 2015 -0400
fix docs, fix another bug in multicast (publish host = bad here!)
commit 88c462eb302b30a82585f95413927a5cbb7d54c4
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 11:50:49 2015 -0400
remove nocommit
commit 89547d7b10d68b23d7f24362e1f4782f5e1ca03c
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 11:49:35 2015 -0400
fix http too
commit 9b9413aca8a3f6397b5031831f910791b685e5be
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 11:06:02 2015 -0400
Fix transport / interface code
Next up: multicast and then http
* Centralised plugin docs in docs/plugins/
* Moved integrations into same docs
* Moved community clients into the clients section of the docs
* Removed docs/community
Closes#11734Closes#11724Closes#11636Closes#11635Closes#11632Closes#11630Closes#12046Closes#12438Closes#12579
This commit updates the Zen Discovery documentation to explain which
nodes partcipate in master election (by default) as well as the
configuration parameters for controlling this.
Closes#12727
Today this is "unofficial" as conf/scripts, but some people
want to share scripts across different nodes and so on. Because
they cannot configure it, they are forced to use dirty hacks
like symbolic links, which isnt going to work: we aren't going
to recursively scan conf/ and add permissions to all link targets
underneath it, thats crazy.
I really hate adding yet another configuration knob here, but
users resorting to using symlinks are going to be frustrated,
and do things in a more insecure way.
The release and smoke test python scripts used to install
plugins in the old fashion.
Also the BATS testing suite installed/removed plugins in that
way. Here the marvel tests have been removed, as marvel currently
does not work with the master branch.
In addition documentation has been updated as well, where it was
still missing.
In order to unify the handling and reuse the CLITool infrastructure
the plugin manager should make use of this as well.
This obsolets the -i and --install options but requires the user
to use `install` as the first argument of the CLI.
This is basically just a port of the existing functionality, which
is also the reason why this is not a refactoring of the plugin manager,
which will come in a separate commit.
During master election each node pings in order to discover other nodes and validate the liveness of existing nodes. Based on this information the node either discovers an existing master or, if enough nodes are found (based on `discovery.zen.minimum_master_nodes>>) a new master will be elected.
Currently, the node that is elected as master will currently update it the cluster state to indicate the result of the election. Other nodes will submit a join request to the newly elected master node. Instead of immediately processing the election result, the elected master
node should wait for the incoming joins from other nodes, thus validating the elections result is properly applied. As soon as enough nodes have sent their joins request (based on the `minimum_master_nodes` settings) the cluster state is modified.
Note that if `minimum_master_nodes` is not set, this change has no effect.
Closes#12161
Require urls for URL repository to be listed in repositories.url.allowed_urls setting. This change ensures that only authorized URLs can be accessed by elasticsearch
Plugin Manager can now use another simplified form when a user wants to install an official plugin hosted at elasticsearch download service.
The form we use is:
```sh
bin/plugin install pluginname
```
As plugins share now the same version as elasticsearch, we can automatically guess what is the exact current version of the plugin manager script.
Also, download service will now use `/org.elasticsearch.plugins/pluginName/pluginName-version.zip` URL path to download a plugin.
If the older form is provided (`user/plugin/version` or `user/plugin`), we will still use:
* elasticsearch download service at `/user/plugin/plugin-version.zip`
* maven central with groupIp=user, artifactId=plugin and version=version
* github with user=user, repoName=plugin and tag=version
* github with user=user, repoName=plugin and branch=master if no version is set
Note that community plugin providers can use other download services by using `--url` option.
If you try to use the new form with a non core elasticsearch plugin, the plugin manager will reject
it and will give you all known core plugins.
```
Usage:
-u, --url [plugin location] : Set exact URL to download the plugin from
-i, --install [plugin name] : Downloads and installs listed plugins [*]
-t, --timeout [duration] : Timeout setting: 30s, 1m, 1h... (infinite by default)
-r, --remove [plugin name] : Removes listed plugins
-l, --list : List installed plugins
-v, --verbose : Prints verbose messages
-s, --silent : Run in silent mode
-h, --help : Prints this help message
[*] Plugin name could be:
elasticsearch-plugin-name for Elasticsearch 2.0 Core plugin (download from download.elastic.co)
elasticsearch/plugin/version for elasticsearch commercial plugins (download from download.elastic.co)
groupId/artifactId/version for community plugins (download from maven central or oss sonatype)
username/repository for site plugins (download from github master)
Elasticsearch Core plugins:
- elasticsearch-analysis-icu
- elasticsearch-analysis-kuromoji
- elasticsearch-analysis-phonetic
- elasticsearch-analysis-smartcn
- elasticsearch-analysis-stempel
- elasticsearch-cloud-aws
- elasticsearch-cloud-azure
- elasticsearch-cloud-gce
- elasticsearch-delete-by-query
- elasticsearch-lang-javascript
- elasticsearch-lang-python
```
In order to be more consistent with what they do, the query cache has been
renamed to request cache and the filter cache has been renamed to query
cache.
A known issue is that package/logger names do no longer match settings names,
please speak up if you think this is an issue.
Here are the settings for which I kept backward compatibility. Note that they
are a bit different from what was discussed on #11569 but putting `cache` before
the name of what is cached has the benefit of making these settings consistent
with the fielddata cache whose size is configured by
`indices.fielddata.cache.size`:
* index.cache.query.enable -> index.requests.cache.enable
* indices.cache.query.size -> indices.requests.cache.size
* indices.cache.filter.size -> indices.queries.cache.size
Close#11569
Today, we disable CORS by default, but if a user simply enables CORS their instance of
elasticsearch will allow cross origin requests from anywhere, as the default value for allowed
origins is `*`.
This changes the default to be `null` so that no origins are allowed and the user must explicitly
specify the origins they wish to allow requests from. The documentation also mentions that there
is a security risk in using `*` as the value.
Closes#11169
Information about in-progress snapshot and restore processes is not really metadata and should be represented as a part of the cluster state similar to discovery nodes, routing table, and cluster blocks. Since in-progress snapshot and restore information is no longer part of metadata, this refactoring also enables us to handle cluster blocks in more consistent manner and allow creation of snapshots of a read-only cluster.
Closes#8102
While we had initially planned to keep rivers around in 2.0 to ease migration,
keeping support for rivers is challenging as it conflicts with other important
changes that we want to bring to 2.0 like synchronous dynamic mappings updates.
Nothing impossible to fix, but it would increase the complexity of how we
deal with dynamic mappings updates and manage rivers, while handling dynamic
mappings updates correctly is important for resiliency and rivers are on the go.
So removing rivers in 2.0 may well be a better trade-off.
The ResourceWatcher used settings prefixed `watcher.`, which
potentially could clash with the watcher plugin.
In order to prevent confusion, the settings have been renamed to
`resource.reload` prefixes.
This also uses the deprecation logging infrastructure introduced
in #11033 to log deprecated settings and their alternative at
startup.
Closes#11175
This change unifies the way scripts and templates are specified for all instances in the codebase. It builds on the Script class added previously and adds request building and parsing support as well as the ability to transfer script objects between nodes. It also adds a Template class which aims to provide the same functionality for template APIs
Closes#11091
Added infrastructure to allow basic member methods in the expressions
language to be called. The methods must have a signature with no arguments. Also
added the following member methods for date fields (and it should be easy to add more)
* getYear
* getMonth
* getDayOfMonth
* getHourOfDay
* getMinutes
* getSeconds
Allow fields to be accessed without using the member variable [value].
(Note that both ways can be used to access fields for back-compat.)
closes#10890
Groovy sandboxing was disabled by default from 1.4.3 on though since we found out that it could be worked around, so it makes little sense to keep it and maintain it.
Closes#10156Closes#10480
* Removed the docs for `index.compound_format` and `index.compound_on_flush` - these are expert settings which should probably be removed (see https://github.com/elastic/elasticsearch/issues/10778)
* Removed the docs for `index.index_concurrency` - another expert setting
* Labelled the segments verbose output as experimental
* Marked the `compression`, `precision_threshold` and `rehash` options as experimental in the cardinality and percentile aggs
* Improved the experimental text on `significant_terms`, `execution_hint` in the terms agg, and `terminate_after` param on count and search
* Removed the experimental flag on the `geobounds` agg
* Marked the settings in the `merge` and `store` modules as experimental, rather than the modules themselves
Closes#10782
* In code, we mark `River`, `AbstractRiverComponent`, `RiverComponent` and `RiverName` classes as deprecated
* We log that information when a cluster is still using it
* We add this information in the plugins list as well
Plugins can now define multiple operations/contexts that they use scripts for. Fine-grained settings can then be used to enable/disable scripts based on each single registered context.
Also added a new generic category called `plugin`, which will be used as a default when the context is not specified. This allows us to restore backwards compatibility for plugins on `ScriptService` by restoring the old methods that don't require the script context and making them internally use the `plugin` context, as they can only be called from plugins.
Closes#10347Closes#10419
Now that fine-grained script settings are supported (#10116) we can remove support for the script.disable_dynamic setting.
Same result as `script.disable_dynamic: false` can be obtained as follows:
```
script.inline: on
script.indexed: on
```
An exception is thrown at startup when the old setting is set, so we make sure we tell users they have to change it rather than ignoring the setting.
Closes#10286
Nik Everett
Jason Tedor
Ryan Ernst
lslxdx
javanna
Clinton Gormley
Jack Conradson
Praveen Shukla
Joshua Rich
Pascal Borreli
Simon Willnauer
Ali Beyad
Dominik Stadler
Colin Goodheart-Smithe
Pius
Lee Hinman
Nicholas Knize
Brandon Wulf
markwalkom
kingrhoton
Michael Sander
Jim Ferenczi
David Pilato
Robert Muir
Robert Muir
Adrien Grand
Eric Sherman
Tal Levy
Aaron Mildenstein
Mike McCandless
Tanguy Leroux
Kyle Gochenour
Daniel Mitterdorfer
Martijn van Groningen
Simon Willnauer
Boaz Leskes
Areek Zillur
debadair
Vector241-Eric
gaelL
Dongjoon Hyun
Chris Earle
Yannick Welsch
Nick
Michael McCandless
Gao Yingkai
Xu Zhang
Jason O'Donnell
Alexander Reelsen
Masaru Hasegawa
Igor Motov
Jason Tedor
kakakakakku
Shaunak Kashyap
Jay Modi
johnfrederik
jaymode
Colin Goodheart-Smithe
minde-eagleeye
Alexander
Dustin Shiver
David Wittman
Patrick Peschlow