As mapping types are being removed throughout Elasticsearch, the use of
`_type` in pipeline simulation requests is deprecated. Additionally, the
default `_type` used if one is not supplied has been changed to `_doc` for
consistency with the rest of Elasticsearch.
Coalesces two calls into one in a scroll example so all callouts are at
the end of the line. This is the only sort of callouts that are
supported by asciidoctor and we'd like to start building our docs with
asciidoctor.
At present we don't have any mechanism to stop folks adding more inline
callouts but we ought to be able to have one in a few weeks. For now,
though, removing these inline callouts is a step in the right direction.
Relates to #38335
Reduces the leader and follower check timeout to 3 * 10 = 30s instead of 3 * 30 = 90s, with 30s still
being a very long time for a node to be completely unresponsive.
This adds a dedicated field mapper that supports nanosecond resolution -
at the price of a reduced date range.
When using the date field mapper, the time is stored as milliseconds since the epoch
in a long in lucene. This field mapper stores the time in nanoseconds
since the epoch - which means its range is much smaller, ranging roughly from
1970 to 2262.
Note that aggregations will still be in milliseconds.
However docvalue fields will have full nanosecond resolution
Relates #27330
Introduce client-side sorting of groups based on aggregate
functions. To allow this, the Analyzer has been extended to push down
to underlying Aggregate, aggregate function and the Querier has been
extended to identify the case and consume the results in order and sort
them based on the given columns.
The underlying QueryContainer has been slightly modified to allow a view
of the underlying values being extracted as the columns used for sorting
might not be requested by the user.
The PR also adds minor tweaks, mainly related to tree output.
Close#35118
Because concurrent sync requests from a primary to its replicas could be
in flight, it can be the case that an older retention leases collection
arrives and is processed on the replica after a newer retention leases
collection has arrived and been processed. Without a defense, in this
case the replica would overwrite the newer retention leases with the
older retention leases. This commit addresses this issue by introducing
a versioning scheme to retention leases. This versioning scheme is used
to resolve out-of-order processing on the replica. We persist this
version into Lucene and restore it on recovery. The encoding of
retention leases is starting to get a little ugly. We can consider
addressing this in a follow-up.
There are a two major features that are not yet supported by BKD Backed geo_shape: MultiPoint queries, and CONTAINS relation. It is important we are explicitly clear in the documentation that using the new approach may not work for users that depend on these features. This commit adds an IMPORTANT NOTE section to geo_shape docs that explicitly highlights these missing features and what should be done if they are an absolute necessity.
In 7.x Java timestamp formats are the default timestamp format and
there is no need to prefix them with "8". (The "8" prefix was used
in 6.7 to distinguish Java timestamp formats from Joda timestamp
formats.)
This change removes the "8" prefixes from timestamp formats in the
output of the ML file structure finder.
This commit enables the use of TLSv1.3 with security by enabling us to
properly map `TLSv1.3` in the supported protocols setting to the
algorithm for a SSLContext. Additionally, we also enable TLSv1.3 by
default on JDKs that support it.
An issue was uncovered with the MockWebServer when TLSv1.3 is used that
ultimately winds up in an endless loop when the client does not trust
the server's certificate. Due to this, SSLConfigurationReloaderTests
has been pinned to TLSv1.2.
Closes#32276
Currently aggregate functions can operate only directly on fields.
They cannot be used on top of scalar functions as painless scripting
is currently not supported.
With #37000 we made sure that fnial reduction is automatically disabled
whenever a localClusterAlias is provided with a SearchRequest.
While working on #37838, we found a scenario where we do need to set a
localClusterAlias yet we would like to perform a final reduction in the
remote cluster: when searching on a single remote cluster.
Relates to #32125
This commit adds support for a separate finalReduce flag to
SearchRequest and makes use of it in TransportSearchAction in case we
are searching against a single remote cluster.
This also makes sure that num_reduce_phases is correct when searching
against a single remote cluster: it makes little sense to return
`num_reduce_phases` set to `2`, which looks especially weird in case
the search was performed against a single remote shard. We should
perform one reduction phase only in this case and `num_reduce_phases`
should reflect that.
* line length
This change forbids negative field boost in the `query_string`, `simple_query_string`
and `multi_match` queries.
Negative boosts are not allowed in Lucene 8 (scores must be positive).
The backport of this change to 6x will turn the error into a deprecation warning
in order to raise the awareness of this breaking change in 7.0.
Closes#33309
In 6.3 trial licenses were changed to default to security
disabled, and ee added some heuristics to detect when security should
be automatically be enabled if `xpack.security.enabled` was not set.
This change removes those heuristics, and requires that security be
explicitly enabled (via the `xpack.security.enabled` setting) for
trial licenses.
Relates: #38009
Implements `geotile_grid` aggregation
This patch refactors previous implementation https://github.com/elastic/elasticsearch/pull/30240
This code uses the same base classes as `geohash_grid` agg, but uses a different hashing
algorithm to allow zoom consistency. Each grid bucket is aligned to Web Mercator tiles.
When the ingest node user agent parses the device field, it
will result in a string value. To match the ecs schema
this commit moves the value of the parsed device to an
object with an inner field named 'name'. There are not
any passivity concerns since this modifies an unreleased change.
closes#38094
relates #37329
FIRST and LAST can be used with one argument and work similarly to MIN
and MAX but they are implemented using a Top Hits aggregation and
therefore can also operate on keyword fields. When a second argument is
provided then they return the first/last value of the first arg when its
values are ordered ascending/descending (respectively) by the values of
the second argument. Currently because of the usage of a Top Hits
aggregation FIRST and LAST cannot be used in the HAVING clause of a
GROUP BY query to filter on the results of the aggregation.
Closes: #35639
With #37566 we have introduced the ability to merge multiple search responses into one. That makes it possible to expose a new way of executing cross-cluster search requests, that makes CCS much faster whenever there is network latency between the CCS coordinating node and the remote clusters. The coordinating node can now send a single search request to each remote cluster, which gets reduced by each one of them. from + size results are requested to each cluster, and the reduce phase in each cluster is non final (meaning that buckets are not pruned and pipeline aggs are not executed). The CCS coordinating node performs an additional, final reduction, which produces one search response out of the multiple responses received from the different clusters.
This new execution path will be activated by default for any CCS request unless a scroll is provided or inner hits are requested as part of field collapsing. The search API accepts now a new parameter called ccs_minimize_roundtrips that allows to opt-out of the default behaviour.
Relates to #32125
* Added SSL configuration options tests
Removed the allow.self.signed option from the documentation since we allow
by default self signed certificates as well.
* Added more tests
Today we pass `discovery.zen.minimum_master_nodes` to nodes started up in
tests, but for 7.x nodes this setting is not required as it has no effect.
This commit removes this setting so that nodes are started with more realistic
configurations, and deprecates it.
* Add ECS schema for user-agent ingest processor (#37727)
This switches the format of the user agent processor to use the schema from [ECS](https://github.com/elastic/ecs).
So rather than something like this:
```
{
"patch" : "3538",
"major" : "70",
"minor" : "0",
"os" : "Mac OS X 10.14.1",
"os_minor" : "14",
"os_major" : "10",
"name" : "Chrome",
"os_name" : "Mac OS X",
"device" : "Other"
}
```
The structure is now like this:
```
{
"name" : "Chrome",
"original" : "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_14_1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/70.0.3538.102 Safari/537.36",
"os" : {
"name" : "Mac OS X",
"version" : "10.14.1",
"full" : "Mac OS X 10.14.1"
},
"device" : "Other",
"version" : "70.0.3538.102"
}
```
This is now the default for 7.0. The deprecated `ecs` setting in 6.x is not
supported.
Resolves#37329
* Remove `ecs` setting from docs
(a restore needs to be complete, which happens in the background and
by default the ccr put follow api doesn't wait for this)
(this was a recent change and the pr that added this docs test,
did not include this change)
Relates to #37917
Doc-value fields now return a value that is based on the mappings rather than
the script implementation by default.
This deprecates the special `use_field_mapping` docvalue format which was added
in #29639 only to ease the transition to 7.x and it is not necessary anymore in
7.0.
Currently if you mix typed templates and typeless index creation or typeless
templates and typed index creation then you will end up with an error because
Elasticsearch tries to create an index that has multiple types: `_doc` and
the explicit type name that you used.
This commit proposes to give precedence to the index creation call so that
the type from the template will be ignored if the index creation call is
typeless while the template is typed, and the type from the index creation
call will be used if there is a typeless template.
This is consistent with the fact that index creation already "wins" if a field
is defined differently in the index creation call and in a template: the
definition from the index creation call is used in such cases.
Closes#37773
This commit adds classifiers to the distributions indicating the
OS (for archives) and platform. The current OSes are for windows, darwin (ie
macos) and linux. This change will allow future OS/architecture specific
changes to the distributions. Note the docs using distribution links
have been updated, but will be reworked in a followup to make OS
specific instructions for the archives.
Restricted indices (currently only .security-6 and .security) are special
internal indices that require setting the `allow_restricted_indices` flag
on every index permission that covers them. If this flag is `false`
(default) the permission will not cover these and actions against them
will not be authorized.
However, the monitoring APIs were the only exception to this rule.
This exception is herein forfeited and index monitoring privileges have to be
granted explicitly, using the `allow_restricted_indices` flag on the permission,
as is the case for any other index privilege.
* Update the top-level 'getting started' guide.
* Remove custom types from the painless getting started documentation.
* Fix an incorrect references to '_doc' in the cardinality query docs.
* Update the _update docs to use the typeless API format.
This commit modifies the put follow index action to use a
CcrRepository when creating a follower index. It routes
the logic through the snapshot/restore process. A
wait_for_active_shards parameter can be used to configure
how long to wait before returning the response.
The delete and update by query APIs both offer protection against overriding concurrent user changes to the documents they touch. They currently are using internal versioning. This PR changes that to rely on sequences numbers and primary terms.
Relates #37639
Relates #36148
Relates #10708
The update request has a lesser known support for a one off update of a known document version. This PR adds an a seq# based alternative to power these operations.
Relates #36148
Relates #10708
Abdicates to another master-eligible node once the active master is reconfigured out of the voting
configuration, for example through the use of voting configuration exclusions.
Follow-up to #37712
In order to support JSON log format, a custom pattern layout was used and its configuration is enclosed in ESJsonLayout. Users are free to use their own patterns, but if smooth Beats integration is needed, they should use ESJsonLayout. EvilLoggerTests are left intact to make sure user's custom log patterns work fine.
To populate additional fields node.id and cluster.uuid which are not available at start time,
a cluster state update will have to be received and the values passed to log4j pattern converter.
A ClusterStateObserver.Listener is used to receive only one ClusteStateUpdate. Once update is received the nodeId and clusterUUid are set in a static field in a NodeAndClusterIdConverter.
Following fields are expected in JSON log lines: type, tiemstamp, level, component, cluster.name, node.name, node.id, cluster.uuid, message, stacktrace
see ESJsonLayout.java for more details and field descriptions
Docker log4j2 configuration is now almost the same as the one use for ES binary.
The only difference is that docker is using console appenders, whereas ES is using file appenders.
relates: #32850
We inject an Unfollow action before Shrink because the Shrink action
cannot be safely used on a following index, as it may not be fully
caught up with the leader index before the "original" following index is
deleted and replaced with a non-following Shrunken index. The Unfollow
action will verify that 1) the index is marked as "complete", and 2) all
operations up to this point have been replicated from the leader to the
follower before explicitly disconnecting the follower from the leader.
Injecting an Unfollow action before the Rollover action is done mainly
as a convenience: This allow users to use the same lifecycle policy on
both the leader and follower cluster without having to explictly modify
the policy to unfollow the index, while doing what we expect users to
want in most cases.
* ML: Add MlMetadata.upgrade_mode and API
* Adding tests
* Adding wait conditionals for the upgrade_mode call to return
* Adding tests
* adjusting format and tests
* Adjusting wait conditions for api return and msgs
* adjusting doc tests
* adding upgrade mode tests to black list
We changed the `action.auto_create_index` setting to be a dynamic cluster-level
setting in #20274 but today the reference manual indicates that it is still a
static node-level setting. This commit addresses this, and clarifies the
semantics of patterns that may both permit and forbid the creation of certain
indices.
Relates #7513
The docs silently accept duplicate note markers (such as `<3>` here) but
formats them in an unexpected way. This change removes this duplication so that
the rendered documentation looks as intended.
The ML file structure finder has always reported both Joda
and Java time format strings. This change makes the Java time
format strings the ones that are incorporated into mappings
and ingest pipeline definitions.
The BWC syntax of prepending "8" to these formats is used.
This will need to be removed once Java time format strings
become the default in Elasticsearch.
This commit also removes direct imports of Joda classes in the
structure finder unit tests. Instead the core Joda BWC class
is used.
This changes adds the support to handle `nested` fields in the `composite`
aggregation. A `nested` aggregation can be used as parent of a `composite`
aggregation in order to target `nested` fields in the `sources`.
Closes#28611
This commit changes the default for the `track_total_hits` option of the search request
to `10,000`. This means that by default search requests will accurately track the total hit count
up to `10,000` documents, requests that match more than this value will set the `"total.relation"`
to `"gte"` (e.g. greater than or equals) and the `"total.value"` to `10,000` in the search response.
Scroll queries are not impacted, they will continue to count the total hits accurately.
The default is set back to `true` (accurate hit count) if `rest_total_hits_as_int` is set in the search request.
I choose `10,000` as the default because that's also the number we use to limit pagination. This means that users will be able to know how far they can jump (up to 10,000) even if the total number of hits is not accurate.
Closes#33028
The default value for ssl.supported_protocols no longer includes TLSv1
as this is an old protocol with known security issues.
Administrators can enable TLSv1.0 support by configuring the
appropriate `ssl.supported_protocols` setting, for example:
xpack.security.http.ssl.supported_protocols: ["TLSv1.2","TLSv1.1","TLSv1"]
Relates: #36021
Ranaming as follows:
feature -> rank_feature
feature_vector -> rank_features
feature query -> rank_feature query
Ranaming is done to distinguish from other vector types.
Closes#36723
This deprecates the `xpack.watcher.history.cleaner_service.enabled` setting,
since all newly created `.watch-history` indices in 7.0 will use ILM to manage
their retention.
In 8.0 the setting itself and cleanup actions will be removed.
Resolves#32041
This commit removes the Index Audit Output type, following its deprecation
in 6.7 by 8765a31d4e6770. It also adds the migration notice (settings notice).
In general, the problem with the index audit output is that event indexing
can be slower than the rate with which audit events are generated,
especially during the daily rollovers or the rolling cluster upgrades.
In this situation audit events will be lost which is a terrible failure situation
for an audit system.
Besides of the settings under the `xpack.security.audit.index` namespace, the
`xpack.security.audit.outputs` setting has also been deprecated and will be
removed in 7. Although explicitly configuring the logfile output does not touch
any deprecation bits, this setting is made redundant in 7 so this PR deprecates
it as well.
Relates #29881
* Use ILM for Watcher history deletion
This commit adds an index lifecycle policy for the `.watch-history-*` indices.
This policy is automatically used for all new watch history indices.
This does not yet remove the automatic cleanup that the monitoring plugin does
for the .watch-history indices, and it does not touch the
`xpack.watcher.history.cleaner_service.enabled` setting.
Relates to #32041
Users may require the sequence number and primary terms to perform optimistic concurrency control operations. Currently, you can get the sequence number via the `docvalues_fields` API but the primary term is not accessible because it is maintained by the `SeqNoFieldMapper` and the infrastructure can't find it.
This commit adds a dedicated sub fetch phase to return both numbers that is connected to a new `seq_no_primary_term` parameter.
With this commit we add a note to the API conventions documentation that
all date math expressions are resolved independently of any locale. This
behavior might be puzzling to users that try to specify a different
calendar than a Gregorian calendar.
Closes#37330
Relates #37663
Removes all sensitive settings (passwords, auth tokens, urls, etc...) for
watcher notifications accounts. These settings were deprecated (and
herein removed) in favor of their secure sibling that is set inside the
elasticsearch keystore. For example:
`xpack.notification.email.account.<id>.smtp.password`
is no longer a valid setting, and it is replaced by
`xpack.notification.email.account.<id>.smtp.secure_password`
This change adds the unfollow action for CCR follower indices.
This is needed for the shrink action in case an index is a follower index.
This will give the follower index the opportunity to fully catch up with
the leader index, pause index following and unfollow the leader index.
After this the shrink action can safely perform the ilm shrink.
The unfollow action needs to be added to the hot phase and acts as
barrier for going to the next phase (warm or delete phases), so that
follower indices are being unfollowed properly before indices are expected
to go in read-only mode. This allows the force merge action to execute
its steps safely.
The unfollow action has three steps:
* `wait-for-indexing-complete` step: waits for the index in question
to get the `index.lifecycle.indexing_complete` setting be set to `true`
* `wait-for-follow-shard-tasks` step: waits for all the shard follow tasks
for the index being handled to report that the leader shard global checkpoint
is equal to the follower shard global checkpoint.
* `pause-follower-index` step: Pauses index following, necessary to unfollow
* `close-follower-index` step: Closes the index, necessary to unfollow
* `unfollow-follower-index` step: Actually unfollows the index using
the CCR Unfollow API
* `open-follower-index` step: Reopens the index now that it is a normal index
* `wait-for-yellow` step: Waits for primary shards to be allocated after
reopening the index to ensure the index is ready for the next step
In the case of the last two steps, if the index in being handled is
a regular index then the steps acts as a no-op.
Relates to #34648
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Gordon Brown <gordon.brown@elastic.co>
* Add ccr follow info api
This api returns all follower indices and per follower index
the provided parameters at put follow / resume follow time and
whether index following is paused or active.
Closes#37127
* iter
* [DOCS] Edits the get follower info API
* [DOCS] Fixes link to remote cluster
* [DOCS] Clarifies descriptions for configured parameters
The "include_type_name" parameter was temporarily introduced in #37285 to facilitate
moving the default parameter setting to "false" in many places in the documentation
code snippets. Most of the places can simply be reverted without causing errors.
In this change I looked for asciidoc files that contained the
"include_type_name=true" addition when creating new indices but didn't look
likey they made use of the "_doc" type for mappings. This is mostly the case
e.g. in the analysis docs where index creating often only contains settings. I
manually corrected the use of types in some places where the docs still used an
explicit type name and not the dummy "_doc" type.
This commit adds a set_priority action to the hot, warm, and cold
phases for an ILM policy. This action sets the `index.priority`
on the managed index to allow different priorities between the
hot, warm, and cold recoveries.
This commit also includes the HLRC and documentation changes.
closes#36905
* SQL: Rename SQL data type DATE to DATETIME
SQL data type DATE has only the date part (e.g.: 2019-01-14)
without any time information. Previously the SQL type DATE was
referring to the ES DATE which contains also the time part along
with TZ information. To conform with SQL data types the data type
`DATE` is renamed to `DATETIME`, since it includes also the time,
as a new runtime SQL `DATE` data type will be introduced down the road,
which only contains the date part and meets the SQL standard.
Closes: #36440
* Address comments
Some systems default to a nofile ulimit of 65535. To reduce the pain of
deploying Elasticsearch to such systems, this commit lowers the required
limit from 65536 to 65535.
In order to distinguish the ES-SQL type from the standard SQL type
add a new ES-SQL column that will make clear this distingstion,
e.g.: datetime vs TIMSTAMP
Fixes: #37519
The semantics of the API changed considerably since the documentation was written.
The main change is to remove references to memory reduction (this is related to refresh).
Instead, flush refers to recovery times. I also removed the references to trimming the translog
as the translog may be required for other purposes (operation history for ops based recovery
and complement ongoing file based recoveries).
Closes#32869
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
This commit removes the fallback for SSL settings. While this may be
seen as a non user friendly change, the intention behind this change
is to simplify the reasoning needed to understand what is actually
being used for a given SSL configuration. Each configuration now needs
to be explicitly specified as there is no global configuration or
fallback to some other configuration.
Closes#29797
Today file-chunks are sent sequentially one by one in peer-recovery. This is a
correct choice since the implementation is straightforward and recovery is
network bound in most of the time. However, if the connection is encrypted, we
might not be able to saturate the network pipe because encrypting/decrypting
are cpu bound rather than network-bound.
With this commit, a source node can send multiple (default to 2) file-chunks
without waiting for the acknowledgments from the target.
Below are the benchmark results for PMC and NYC_taxis.
- PMC (20.2 GB)
| Transport | Baseline | chunks=1 | chunks=2 | chunks=3 | chunks=4 |
| ----------| ---------| -------- | -------- | -------- | -------- |
| Plain | 184s | 137s | 106s | 105s | 106s |
| TLS | 346s | 294s | 176s | 153s | 117s |
| Compress | 1556s | 1407s | 1193s | 1183s | 1211s |
- NYC_Taxis (38.6GB)
| Transport | Baseline | chunks=1 | chunks=2 | chunks=3 | chunks=4 |
| ----------| ---------| ---------| ---------| ---------| -------- |
| Plain | 321s | 249s | 191s | * | * |
| TLS | 618s | 539s | 323s | 290s | 213s |
| Compress | 2622s | 2421s | 2018s | 2029s | n/a |
Relates #33844
This adds a configurable whitelist to the HTTP client in watcher. By
default every URL is allowed to retain BWC. A dynamically configurable
setting named "xpack.http.whitelist" was added that allows to
configure an array of URLs, which can also contain simple regexes.
Closes#29937
`+` for index name inclusions is no longer supported for 6.x+. This
commit removes references of the `+` from the documenation. System
indices additional example is also included.
fixes#37237
Previously these were only linked in a circuitous way rather than being
available from the top level API documentation and "Put Lifecycle" API docs.
This makes them slightly easier to find for a user.
* provide overriden `hashCode` and toString methods to account for `DISTINCT`
* change the analyzer for scenarios where `COUNT <field_name>` and `COUNT DISTINCT` have different paths
* defined a new `filter` aggregation encapsulating an `exists` query to filter out null or missing values
Upgrading the Elastic Stack perfectly documents the process to
upgrade ES from 5 to 6 when internal indices are present. However,
the rolling upgrade docs do not mention anything about internal indices.
This adds a warning in the rolling upgrade procedure, highlighting that
internal indices should be upgraded before the rolling upgrade procedure
can be started.
This change adds support for the 'include_type_name' parameter for the
indices.get API. This parameter, which defaults to `false` starting in 7.0,
changes the response to not include the indices type names any longer.
If the parameter is set in the request, we additionally emit a deprecation
warning since using the parameter should be only temporarily necessary while
adapting to the new response format and we will remove it with the next major
version.
* [Analysis] Deprecate Standard Html Strip Analyzer
Deprecate only Standard Html Strip Analyzer
If user create index with the analyzer since 7.0, es throws an exception.
If an index was created before 7.0, es issue deprecation log
We will remove it in 8.0
Related #4704
In Lucene 8 searches can skip non-competitive hits if the total hit count is not requested.
It is also possible to track the number of hits up to a certain threshold. This is a trade off to speed up searches while still being able to know a lower bound of the total hit count. This change adds the ability to set this threshold directly in the track_total_hits search option. A boolean value (true, false) indicates whether the total hit count should be tracked in the response. When set as an integer this option allows to compute a lower bound of the total hits while preserving the ability to skip non-competitive hits when enough matches have been collected.
Relates #33028
Today it's very difficult to see which indices are frozen or rather
throttled via the commonly used monitoring APIs. This change adds
a cell to the `_cat/indices` API to render if an index is `search.throttled`
Relates to #34352
Adds an example on translating geohashes returned by geohashgrid
agg as bucket keys into geo bounding box filters in elasticsearch as well
as 3rd party applications.
Closes#36413
Enhance error message for the case that the 2nd argument of PERCENTILE
and PERCENTILE_RANK is not a foldable, as it doesn't make sense to have
a dynamic value coming from a field.
Fixes: #36903
Types can be used both in the source and dest section of the body which will
be translated to search and index requests respectively. Adding a deprecation warning
for those cases and removing examples using more than one type in reindex since
support for this is going to be removed.
There are a handful of examples in the ILM documentation that could result in
rolling over indices more quickly than we might normally recommend,
contributing to over-sharding in cases where the examples are copied without
modification. This change makes some numbers bigger to try and avoid this.
With this commit we rename `node.store.allow_mmapfs` to
`node.store.allow_mmap`. Previously this setting has controlled whether
`mmapfs` could be used as a store type. With the introduction of
`hybridfs` which also relies on memory-mapping,
`node.store.allow_mmapfs` also applies to `hybridfs` and thus we rename
it in order to convey that it is actually used to allow memory-mapping
but not a specific store type.
Relates #36668
Relates #37070
When executing terms aggregations we set the shard_size, meaning the
number of buckets to collect on each shard, to a value that's higher than
the number of requested buckets, to guarantee some basic level of
precision. We have an optimization in place so that we leave shard_size
set to size whenever we are searching against a single shard, in which
case maximum precision is guaranteed by definition.
Such optimization requires us access to the total number of shards that
the search is executing against. In the context of cross-cluster search,
once we will introduce multiple reduction steps (one per cluster) each
cluster will only know the number of local shards, which is problematic
as we should only optimize if we are searching against a single shard in a
single cluster. It could be that we are searching against one shard per cluster
in which case the current code would optimize number of terms causing
a loss of precision.
While discussing how to address the CCS scenario, we decided that we do
not want to introduce further complexity caused by this single shard
optimization, as it benefits only a minority of cases, especially when
the benefits are not so great.
This commit removes the single shard optimization, meaning that we will
always have heuristic enabled on how many number of buckets to collect
on the shards, even when searching against a single shard.
This will cause more buckets to be collected when searching against a single
shard compared to before. If that becomes a problem for some users, they
can work around that by setting the shard_size equal to the size.
Relates to #32125
With this commit we introduce a new store type `hybridfs` that is a
hybrid between `mmapfs` and `niofs`. This store type chooses different
strategies to read Lucene files based on the read access pattern (random
or linear) in order to optimize performance.
This store type has been available in earlier versions of Elasticsearch
as `default_fs`. We have chosen a different name now in order to convey
the intent of the store type instead of tying it to the fact whether it
is the default choice.
Relates #36668
This commit fixes some cross-doc links from the old ingest plugins page
to the new ingest processor pages that arose after converting
ingest-geoip and ingest-user-agent to modules.
This commit adds a placeholder ingest-geoip plugin page as there are
other components in the Elastic Stack that still refer to these
pages. These docs would be broken without this placeholder page forcing
teams responsible for those docs to scramble to fix the build over the
weekend before a holiday period. Instead, we add a placeholder page so
the docs build continues to function, and those teams can fix their docs
without the constraint of a broken build. We also cleanup a few minor
docs issues that were missed during the initial changes to convert
ingest-geoip to a module.
This extra scenario describes the case where an updated
policy increases the current phase's `min_age`. Now, the
docs explicitly describe this scenario as to what is
expected -- old min_age is used.
Closes#35356.
* Added Limitations page
* Made the aggregations page follow the common template for functions
* Modified all tables to have the first row's cells content centered
* Polishing in other various sections
This is a follow-up to some discussions around #36399. Currently we have
relatively confusing compression behavior where compression can be
configured for requests based on transport.compress or a specific
setting for a remote cluster. However, we can only compress responses
based on transport.compress as we do not know where a request is
coming from (currently).
This commit modifies the behavior to NEVER compress responses based on
settings. Instead, a response will only be compressed if the request was
compressed. This commit also updates the documentation to more clearly
described transport level compression.
Allow scripts to correctly reference grouping functions
Fix bug in translation of date/time functions mixed with histograms.
Enhance Verifier to prevent histograms being nested inside other
functions inside GROUP BY (as it implies double grouping)
Extend Histogram docs
This commit breaks the single ingest docs file into multiple files,
factoring out the processor docs into a documentation file per
processor. This will help make this content easier to maintain.
This commit overhauls the documentation of discovery and cluster coordination,
removing mention of the Zen Discovery module and replacing it with docs for the
new cluster coordination mechanism introduced in 7.0.
Relates #32006
Leaving `index.lifecycle.indexing_complete` in place when removing the
lifecycle policy from an index can cause confusion, as if a new policy
is associated with the policy, rollover will be silently skipped.
Removing that setting when removing the policy from an index makes
associating a new policy with the index more involved, but allows ILM to
fail loudly, rather than silently skipping operations which the user may
assume are being performed.
* Adjust order of checks in WaitForRolloverReadyStep
This allows ILM to error out properly for indices that have a valid
alias, but are not the write index, while still handling
`indexing_complete` on old-style aliases and rollover (that is, those
which only point to a single index at a time with no explicit write
index)
This is related to #36652. In 7.0 we plan to deprecate a number of
settings that make reference to the concept of a tcp transport. We
mostly just have a single transport type now (based on tcp). Settings
should only reference tcp if they are referring to socket options. This
commit updates the settings in the docs. And removes string usages of
the old settings. Additionally it adds a missing remote compress setting
to the docs.
* [ML] Job and datafeed mappings with index template (#32719)
Index mappings for the configuration documents
* [ML] Job config document CRUD operations (#32738)
* [ML] Datafeed config CRUD operations (#32854)
* [ML] Change JobManager to work with Job config in index (#33064)
* [ML] Change Datafeed actions to read config from the config index (#33273)
* [ML] Allocate jobs based on JobParams rather than cluster state config (#33994)
* [ML] Return missing job error when .ml-config is does not exist (#34177)
* [ML] Close job in index (#34217)
* [ML] Adjust finalize job action to work with documents (#34226)
* [ML] Job in index: Datafeed node selector (#34218)
* [ML] Job in Index: Stop and preview datafeed (#34605)
* [ML] Delete job document (#34595)
* [ML] Convert job data remover to work with index configs (#34532)
* [ML] Job in index: Get datafeed and job stats from index (#34645)
* [ML] Job in Index: Convert get calendar events to index docs (#34710)
* [ML] Job in index: delete filter action (#34642)
This changes the delete filter action to search
for jobs using the filter to be deleted in the index
rather than the cluster state.
* [ML] Job in Index: Enable integ tests (#34851)
Enables the ml integration tests excluding the rolling upgrade tests and a lot of fixes to
make the tests pass again.
* [ML] Reimplement established model memory (#35500)
This is the 7.0 implementation of a master node service to
keep track of the native process memory requirement of each ML
job with an associated native process.
The new ML memory tracker service works when the whole cluster
is upgraded to at least version 6.6. For mixed version clusters
the old mechanism of established model memory stored on the job
in cluster state was used. This means that the old (and complex)
code to keep established model memory up to date on the job object
has been removed in 7.0.
Forward port of #35263
* [ML] Need to wait for shards to replicate in distributed test (#35541)
Because the cluster was expanded from 1 node to 3 indices would
initially start off with 0 replicas. If the original node was
killed before auto-expansion to 1 replica was complete then
the test would fail because the indices would be unavailable.
* [ML] DelayedDataCheckConfig index mappings (#35646)
* [ML] JIndex: Restore finalize job action (#35939)
* [ML] Replace Version.CURRENT in streaming functions (#36118)
* [ML] Use 'anomaly-detector' in job config doc name (#36254)
* [ML] Job In Index: Migrate config from the clusterstate (#35834)
Migrate ML configuration from clusterstate to index for closed jobs
only once all nodes are v6.6.0 or higher
* [ML] Check groups against job Ids on update (#36317)
* [ML] Adapt to periodic persistent task refresh (#36633)
* [ML] Adapt to periodic persistent task refresh
If https://github.com/elastic/elasticsearch/pull/36069/files is
merged then the approach for reallocating ML persistent tasks
after refreshing job memory requirements can be simplified.
This change begins the simplification process.
* Remove AwaitsFix and implement TODO
* [ML] Default search size for configs
* Fix TooManyJobsIT.testMultipleNodes
Two problems:
1. Stack overflow during async iteration when lots of
jobs on same machine
2. Not effectively setting search size in all cases
* Use execute() instead of submit() in MlMemoryTracker
We don't need a Future to wait for completion
* [ML][TEST] Fix NPE in JobManagerTests
* [ML] JIindex: Limit the size of bulk migrations (#36481)
* [ML] Prevent updates and upgrade tests (#36649)
* [FEATURE][ML] Add cluster setting that enables/disables config migration (#36700)
This commit adds a cluster settings called `xpack.ml.enable_config_migration`.
The setting is `true` by default. When set to `false`, no config migration will
be attempted and non-migrated resources (e.g. jobs, datafeeds) will be able
to be updated normally.
Relates #32905
* [ML] Snapshot ml configs before migrating (#36645)
* [FEATURE][ML] Split in batches and migrate all jobs and datafeeds (#36716)
Relates #32905
* SQL: Fix translation of LIKE/RLIKE keywords (#36672)
* SQL: Fix translation of LIKE/RLIKE keywords
Refactor Like/RLike functions to simplify internals and improve query
translation when chained or within a script context.
Fix#36039Fix#36584
* Fixing line length for EnvironmentTests and RecoveryTests (#36657)
Relates #34884
* Add back one line removed by mistake regarding java version check and
COMPAT jvm parameter existence
* Do not resolve addresses in remote connection info (#36671)
The remote connection info API leads to resolving addresses of seed
nodes when invoked. This is problematic because if a hostname fails to
resolve, we would not display any remote connection info. Yet, a
hostname not resolving can happen across remote clusters, especially in
the modern world of cloud services with dynamically chaning
IPs. Instead, the remote connection info API should be providing the
configured seed nodes. This commit changes the remote connection info to
display the configured seed nodes, avoiding a hostname resolution. Note
that care was taken to preserve backwards compatibility with previous
versions that expect the remote connection info to serialize a transport
address instead of a string representing the hostname.
* [Painless] Add boxed type to boxed type casts for method/return (#36571)
This adds implicit boxed type to boxed types casts for non-def types to create asymmetric casting relative to the def type when calling methods or returning values. This means that a user calling a method taking an Integer can call it with a Byte, Short, etc. legally which matches the way def works. This creates consistency in the casting model that did not previously exist.
* SNAPSHOTS: Adjust BwC Versions in Restore Logic (#36718)
* Re-enables bwc tests with adjusted version conditions now that #36397 enables concurrent snapshots in 6.6+
* ingest: fix on_failure with Drop processor (#36686)
This commit allows a document to be dropped when a Drop processor
is used in the on_failure fork of the processor chain.
Fixes#36151
* Initialize startup `CcrRepositories` (#36730)
Currently, the CcrRepositoryManger only listens for settings updates
and installs new repositories. It does not install the repositories that
are in the initial settings. This commit, modifies the manager to
install the initial repositories. Additionally, it modifies the ccr
integration test to configure the remote leader node at startup, instead
of using a settings update.
* [TEST] fix float comparison in RandomObjects#getExpectedParsedValue
This commit fixes a test bug introduced with #36597. This caused some
test failure as stored field values comparisons would not work when CBOR
xcontent type was used.
Closes#29080
* [Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)
This commit exposes lucene's LatLonShape field as the
default type in GeoShapeFieldMapper. To use the new
indexing approach, simply set "type" : "geo_shape" in
the mappings without setting any of the strategy, precision,
tree_levels, or distance_error_pct parameters. Note the
following when using the new indexing approach:
* geo_shape query does not support querying by
MULTIPOINT.
* LINESTRING and MULTILINESTRING queries do not
yet support WITHIN relation.
* CONTAINS relation is not yet supported.
The tree, precision, tree_levels, distance_error_pct,
and points_only parameters are deprecated.
* TESTS:Debug Log. IndexStatsIT#testFilterCacheStats
* ingest: support default pipelines + bulk upserts (#36618)
This commit adds support to enable bulk upserts to use an index's
default pipeline. Bulk upsert, doc_as_upsert, and script_as_upsert
are all supported.
However, bulk script_as_upsert has slightly surprising behavior since
the pipeline is executed _before_ the script is evaluated. This means
that the pipeline only has access the data found in the upsert field
of the script_as_upsert. The non-bulk script_as_upsert (existing behavior)
runs the pipeline _after_ the script is executed. This commit
does _not_ attempt to consolidate the bulk and non-bulk behavior for
script_as_upsert.
This commit also adds additional testing for the non-bulk behavior,
which remains unchanged with this commit.
fixes#36219
* Fix duplicate phrase in shrink/split error message (#36734)
This commit removes a duplicate "must be a" from the shrink/split error
messages.
* Deprecate types in get_source and exist_source (#36426)
This change adds a new untyped endpoint `{index}/_source/{id}` for both the
GET and the HEAD methods to get the source of a document or check for its
existance. It also adds deprecation warnings to RestGetSourceAction that emit
a warning when the old deprecated "type" parameter is still used. Also updating
documentation and tests where appropriate.
Relates to #35190
* Revert "[Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)"
This reverts commit 5bc7822562.
* Enhance Invalidate Token API (#35388)
This change:
- Adds functionality to invalidate all (refresh+access) tokens for all users of a realm
- Adds functionality to invalidate all (refresh+access)tokens for a user in all realms
- Adds functionality to invalidate all (refresh+access) tokens for a user in a specific realm
- Changes the response format for the invalidate token API to contain information about the
number of the invalidated tokens and possible errors that were encountered.
- Updates the API Documentation
After back-porting to 6.x, the `created` field will be removed from master as a field in the
response
Resolves: #35115
Relates: #34556
* Add raw sort values to SearchSortValues transport serialization (#36617)
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of each `SearchHit`. Sort values are already present but they are formatted according to the provided `DocValueFormat` provided. The CCS node needs to be able to reconstruct the lucene `FieldDoc` to include in the `TopFieldDocs` and `CollapseTopFieldDocs` which will feed the `mergeTopDocs` method used to reduce multiple search responses (one per cluster) into one.
This commit adds such information to the `SearchSortValues` and exposes it through a new getter method added to `SearchHit` for retrieval. This info is only serialized at transport and never printed out at REST.
* Watcher: Ensure all internal search requests count hits (#36697)
In previous commits only the stored toXContent version of a search
request was using the old format. However an executed search request was
already disabling hit counts. In 7.0 hit counts will stay enabled by
default to allow for proper migration.
Closes#36177
* [TEST] Ensure shard follow tasks have really stopped.
Relates to #36696
* Ensure MapperService#getAllMetaFields elements order is deterministic (#36739)
MapperService#getAllMetaFields returns an array, which is created out of
an `ObjectHashSet`. Such set does not guarantee deterministic hash
ordering. The array returned by its toArray may be sorted differently
at each run. This caused some repeatability issues in our tests (see #29080)
as we pick random fields from the array of possible metadata fields,
but that won't be repeatable if the input array is sorted differently at
every run. Once setting the tests seed, hppc picks that up and the sorting is
deterministic, but failures don't repeat with the seed that gets printed out
originally (as a seed was not originally set).
See also https://issues.carrot2.org/projects/HPPC/issues/HPPC-173.
With this commit, we simply create a static sorted array that is used for
`getAllMetaFields`. The change is in production code but really affects
only testing as the only production usage of this method was to iterate
through all values when parsing fields in the high-level REST client code.
Anyways, this seems like a good change as returning an array would imply
that it's deterministically sorted.
* Expose Sequence Number based Optimistic Concurrency Control in the rest layer (#36721)
Relates #36148
Relates #10708
* [ML] Mute MlDistributedFailureIT
* [Geo] Expose BKDBackedGeoShapes as new VECTOR strategy
This commit exposes lucene's LatLonShape field as a new
strategy in GeoShapeFieldMapper. To use the new indexing
approach, strategy should be set to "vector" in the
geo_shape field mapper. If the tree parameter is set
the mapper will throw an IAE. Note the following:
When using vector strategy:
* geo_shape query does not support querying by POINT,
MULTIPOINT, or GEOMETRYCOLLECTION.
* LINESTRING and MULTILINESTRING queries do not support
WITHIN relation.
* CONTAINS relation is not supported.
* The tree, precision, tree_levels, distance_error_pct,
and points_only parameters will not throw an exception
but they have no effect and will be marked as
deprecated..
All other features are supported.
* revert change to PercolatorFieldMapper
* fix ExistsQuery for geo_shape vector strategy
* add deprecation logging for tree, precision, tree_levels, distance_error_pct, and points_only
* initial update to geoshape docs, including mapping migration updates
* initial support for GeoCollection queries
* fix docs and javadoc errors
* clean up geocollection queries
* set deprecated mapping tests to NOTCONSOLE
* fix geo-shape mapper asciidoc mapping and test warnings
* add support for point queries using LatLonShapeBoundingBoxQuery
* update GeoShapeQueryBuilderTests to include POINT queries for VECTOR strategy. Other comment cleanups
* add lucene geometry build testing to ShapeBuilder tests
* remove deprecated prefix tree mapping from geo-shape.asciidoc
* refactor GeoShapeFieldMapper into LegacyGeoShapeFieldMapper and GeoShapeFieldMapper
Both classes derive from BaseGeoShapeFieldMapper that provides shared parameters:
coerce, ignoreMalformed, ignore_z_value, orientation.
* update docs to remove vector strategy
* fix GeometryCollectionBuilder#buildLucene to return the object created by the shape builder
* fix LineLength failure in GeoJsonShapeParserTests
* ShapeMapper refactor changes from PR feedback
* fix typo in geo-shape.asciidoc
* ignore circle test in docs
* update indexing-approach ref to geoshape-indexing-approach
* add warnings check for LegacyGeoShapeFieldMapper to AbstractBuilderTestCase
* fix deprecatedParameters setup
* update indexing approach
* fixing unexpected warnings failures
* move orientation back to field type
* remove if in LegacyGeoShapeFieldMapper#doXContent. Fix GeoShapeFieldMapper to work with double array as a point
* fix indexing-approach link in circle section of geoshape docs
* add strategy to deprecation warnings check
* fix test failures
* fix typo in QueryStringQueryBuilderTests
* fix total hits to totalHits().value
* fix version number
* add version check to BaseGeoShapeFieldMapper
* fix line length!
* revert version check in BaseGeoShapeFieldMapper
* Fix serialization of mappings of legacy shapes.
The first example given is missing the two single-token cases for "is" and "a".
The later usage example is slightly wrong in that custom analyzers should
go under `settings.analysis.analyzer`.
* Deprecate types in index API
- deprecate type-based constructors of IndexRequest
- update tests to use typeless IndexRequest constructors
- no yaml tests as they have been already added in #35790
Relates to #35190
This commit adds an adjust_offsets parameter to the word_delimiter_graph token filter, defaulting
to true. Most of the time you'd want sub-tokens emitted by this filter to have offsets that are
adjusted to their real position in the token stream; however, some token filters can change the
length or starting position of a token (eg trim) without changing their offset attributes, and this
can lead to word_delimiter_graph emitting illegal offsets. Setting adjust_offsets to false in these
cases will allow indexing again.
Fixes#34741, #33710
This change adds a new untyped endpoint `{index}/_source/{id}` for both the
GET and the HEAD methods to get the source of a document or check for its
existance. It also adds deprecation warnings to RestGetSourceAction that emit
a warning when the old deprecated "type" parameter is still used. Also updating
documentation and tests where appropriate.
Relates to #35190
This commit exposes lucene's LatLonShape field as the
default type in GeoShapeFieldMapper. To use the new
indexing approach, simply set "type" : "geo_shape" in
the mappings without setting any of the strategy, precision,
tree_levels, or distance_error_pct parameters. Note the
following when using the new indexing approach:
* geo_shape query does not support querying by
MULTIPOINT.
* LINESTRING and MULTILINESTRING queries do not
yet support WITHIN relation.
* CONTAINS relation is not yet supported.
The tree, precision, tree_levels, distance_error_pct,
and points_only parameters are deprecated.
This commit adds the last sequence number and primary term of the last operation that have
modified a document to `GetResult` and uses it to power the Update API.
Relates #36148
Relates #10708
For each remote cluster the auto follow coordinator, starts an auto
follower that checks the remote cluster state and determines whether an
index needs to be auto followed. The time since last auto follow is
reported per remote cluster and gives insight whether the auto follow
process is alive.
Relates to #33007
Originates from #35895
Introduce Histogram grouping function for bucketing/grouping data based
on a given range. Both date and numeric histograms are supported using
the appropriate range declaration (numbers vs intervals).
SELECT HISTOGRAM(number, 50) AS h FROM index GROUP BY h
SELECT HISTOGRAM(date, INTERVAL 1 YEAR) AS h FROM index GROUP BY h
In addition add multiply operator for Intervals
Add docs for intervals and histogram
Fix#36509
* Add IntervalQueryBuilder with support for match and combine intervals
* Add relative intervals
* feedback
* YAML test - broekn
* yaml test; begin to add block source
* Add block; make disjunction its own source
* WIP
* Extract IntervalBuilder and add tests for it
* Fix eq/hashcode in Disjunction
* New yaml test
* checkstyle
* license headers
* test fix
* YAML format
* YAML formatting again
* yaml tests; javadoc
* Add OR test -> requires fix from LUCENE-8586
* Add docs
* Re-do API
* Clint's API
* Delete bash script
* doc fixes
* imports
* docs
* test fix
* feedback
* comma
* docs fixes
* Tidy up doc references to old rule
Add CURRENT_TIMESTAMP as keyword as well function alongside NOW()
These return the current date/time for the given query, computed when
the statement reaches the server. For completeness, CURRENT_TIMESTAMP
also accepts precision as an optional parameter.
Fix#36534
* Adds deprecation logging to ScriptDocValues#getValues.
First commit addressing issue #22919.
`ScriptDocValues#getValues` was added for backwards compatibility but no
longer needed. Scripts using the syntax `doc['foo'].values` when
`doc['foo']` is a list should be using `doc['foo']` instead.
* Fixes two build errors in #34279
* Removes unused import in ScriptDocValuesDatesTest
* Removes used of `.values` in example in diversified-sampler-aggregation.asciidoc
* Removes use of .values from painless test.
Part of #34279
* Updates tests to use `doc[foo]` syntax rather than `doc[foo].values`.
* Removes use of `getValues()` and replaces use of `doc[foo].values` with `doc[foo]`.
* Indentation fix.
* Remove unnecessary list construction at previous `getValues()` callsite in ScriptDocValues.GeoPoints.
* Update migration doc and add link to `getValue` in ScriptDocValues javadoc.
* Fix compile
* Fix javadoc issue
* Removes ScriptDocValues#getValues usage from painless whitelist.
* Enable parallel restore operations
* Add uuid to restore in progress entries to uniquely identify them
* Adjust restore in progress entries to be a map in cluster state
* Added tests for:
* Parallel restore from two different snapshots
* Parallel restore from a single snapshot to different indices to test uuid identifiers are correctly used by `RestoreService` and routing allocator
* Parallel restore with waiting for completion to test transport actions correctly use uuid identifiers
* Add guidance on using CCR with Logstash
This commit adds a note to the documentation regarding how to configure
Logstash indices in the context of being available as leader indices for
cross-cluster replication.
* Oh okay
* idk
* notconsole
This commit adds deprecation warnings when using format specifiers with
joda data formats that will change with java time. It also adds the "8"
prefix which may be used to force the new java time format parsing.
When a security manager is present, the JVM will cache positive hostname
lookups indefinitely. This can be problematic, especially in the modern
world with cloud services where DNS addresses can change, or
environments using Docker containers where IP addresses could be
considered ephemeral. This behavior impacts cluster discovery,
cross-cluster replication and cross-cluster search, reindex from remote,
snapshot repositories, webhooks in Watcher, external authentication
mechanisms, and the Elastic Stack Monitoring Service. The experience of
watching a DNS lookup change yet not be reflected within Elasticsearch
is a poor experience for users. The reason the JVM has this is guard
against DNS cache posioning attacks. Yet, there is already a defense in
the modern world against such attacks: TLS. With proper certificate
validation, even if a resolver falls prey to a DNS cache poisoning
attack, using TLS would neuter the attack. Therefore we have a policy
with dubious security value that significantly impacts usability. As
such we make the usability/security tradeoff towards usability, since
the security risks are very low. This commit introduces new system
properties that Elasticsearch observes to override the JVM DNS cache
policy.
Previously persistent task assignment was checked in the
following situations:
- Persistent tasks are changed
- A node joins or leaves the cluster
- The routing table is changed
- Custom metadata in the cluster state is changed
- A new master node is elected
However, there could be situations when a persistent
task that could not be assigned to a node could become
assignable due to some other change, such as memory
usage on the nodes.
This change adds a timed recheck of persistent task
assignment to account for such situations. The timer
is suspended while checks triggered by cluster state
changes are in-flight to avoid adding burden to an
already busy cluster.
Closes#35792
Redeprecates the `/_xpack/rollup` endpoints in favor of `/_rollup`.
When we cleanup the rollup in a cluster containing 6.x nodes we need to
use `/_xpack/rollup` instead of `/_rollup` because the 6.x nodes don't
know about `/_rollup`. In those cases we must ignore the deprecation
warnings that the 7.0 node will return for the end point.
Closes#36044
* Renamed DAY_OF_WEEK and WEEK_OF_YEAR functions to their ISO version and
added the same functions with different functionality.
* Rewritten the datetime functions documentation to follow the format of the other
functions documentation pages.
Adds a setting that indicates that an index is done indexing, set by ILM
when the Rollover action completes. This indicates that the Rollover
action should be skipped in any future invocations, as long as the index
is no longer the write index for its alias.
This enables 1) an index with a policy that involves the Rollover action
to have the policy removed and switched to another one without use of
the move-to-step API, and 2) integrations with Beats and CCR.
* Lower fielddata circuit breaker default limit
Lower fielddata circuit breaker default limit from 60% to 40% as we have
moved to doc_values for most of the cases.
* merge master in
* update tests
* update docs
Gordon Brown
Nik Everett
Yannick Welsch
Alexander Reelsen
Costin Leau
Jason Tedor
Benjamin Trent
Nick Knize
David Roberts
Jay Modi
Marios Trivyzas
Luca Cavanna
Jim Ferenczi
Tim Vernum
Yuri Astrakhan
Jake Landis
Julie Tibshirani
Henning Andersen
Andrei Stefan
Adrien Grand
David Turner
Lee Hinman
Martijn van Groningen
Ryan Ernst
Albert Zaharovits
Tim Brooks
Boaz Leskes
Przemyslaw Gomulka
Lisa Cawley
Mayya Sharipova
Peter Dyson
Christoph Büscher
niloct
Daniel Mitterdorfer
David Kyle
Mike Place
Nhat Nguyen
Jun Ohtani
Andrew Banchich
Josh Soref
Adam Thomson
Simon Willnauer
Dimitris Athanasiou
Tal Levy
Igor Motov
Abdullah DURSUN
Peter Lyons
Damien Alexandre
Tom Callahan
Alan Woodward
João Barbosa
Jeff Hajewski
Armin Braun
Gil Raphaelli
debadair
Yu