This change stops indexing the `_primary_term` field for nested documents
to allow fast retrieval of parent documents. Today we create a docvalues
field for children to ensure we have a dense datastructure on disk. Yet,
since we only use the primary term to tie-break on when we see the same
seqID on indexing having a dense datastructure is less important. We can
use this now to improve the nested docs performance and it's memory footprint.
Relates to #24362
the query would be marked as verified candidate match. This is wrong as it can only marked as verified candidate match
on indices created on or after 6.1, due to the use of the CoveringQuery.
extract all clauses from a conjunction query.
When clauses from a conjunction are extracted the number of clauses is
also stored in an internal doc values field (minimum_should_match field).
This field is used by the CoveringQuery and allows the percolator to
reduce the number of false positives when selecting candidate matches and
in certain cases be absolutely sure that a conjunction candidate match
will match and then skip MemoryIndex validation. This can greatly improve
performance.
Before this change only a single clause was extracted from a conjunction
query. The percolator tried to extract the clauses that was rarest in order
(based on term length) to attempt less candidate queries to be selected
in the first place. However this still method there is still a very high
chance that candidate query matches are false positives.
This change also removes the influencing query extraction added via #26081
as this is no longer needed because now all conjunction clauses are extracted.
https://www.elastic.co/guide/en/elasticsearch/reference/6.x/percolator.html#_influencing_query_extractionCloses#26307
* Enhances exists queries to reduce need for `_field_names`
Before this change we wrote the name all the fields in a document to a `_field_names` field and then implemented exists queries as a term query on this field. The problem with this approach is that it bloats the index and also affects indexing performance.
This change adds a new method `existsQuery()` to `MappedFieldType` which is implemented by each sub-class. For most field types if doc values are available a `DocValuesFieldExistsQuery` is used, falling back to using `_field_names` if doc values are disabled. Note that only fields where no doc values are available are written to `_field_names`.
Closes#26770
* Addresses review comments
* Addresses more review comments
* implements existsQuery explicitly on every mapper
* Reinstates ability to perform term query on `_field_names`
* Added bwc depending on index created version
* Review Comments
* Skips tests that are not supported in 6.1.0
These values will need to be changed after backporting this PR to 6.x
Today we can't validate the array length in `InputStreamStreamInput` since
we can't rely on `InputStream.available` yet in some situations we know
the size of the stream and can apply additional validation.
* Fix percolator highlight sub fetch phase to not highlight query twice
The PercolatorHighlightSubFetchPhase does not override hitExecute and since it extends HighlightPhase the search hits
are highlighted twice (by the highlight phase and then by the percolator). This does not alter the results, the second highlighting
just overrides the first one but this slow down the request because it duplicates the work.
Today we have all non-plugin mappers in core. I'd like to start moving those
that neither map to json datatypes nor are very frequently used like `date` or
`ip` to a module.
This commit creates a new module called `mappers-extra` and moves the
`scaled_float` and `token_count` mappers to it. I'd like to eventually move
`range` fields there but it's more complicated due to their intimate
relationship with range queries.
Relates #10368
RangeQueryBuilder needs to perform too many `instanceof` checks in order to
check for `date` or `range` fields in order to know what it should do with the
shape relation, time zone and date format.
This commit adds those 3 parameters to the `rangeQuery` factory method so that
those instanceof checks are not necessary anymore.
The percolator will add a `_percolator_document_slot` field to all percolator
hits to indicate with what document it has matched. This number matches with
the order in which the documents have been specified in the percolate query.
Also improved the support for multiple percolate queries in a search request.
* If in a range query upper is smaller than lower then ignore the range query
* If two empty range extractions are compared don't fail with NoSuchElementException
The `index.percolator.map_unmapped_fields_as_text` is a more better name, because unmapped fields are mapped to a text field with default settings
and string is no longer a field type (it is either keyword or text).
Due to the weird way of structuring the serialization code in AcknowledgedRequest, many request types forgot to properly serialize the request timeout, for example "index deletion", "index rollover", "index shrink", "putting pipeline", and other requests. This means that if those requests were not directly sent to the master node, the acknowledgement timeout information would be lost (and the default used instead).
Some requests also don't properly expose the timeout mechanism in the REST layer, such as put / delete stored script. This commit fixes all that.
The percolator field mapper doesn't need to extract all terms and ranges from a bool query with must or filter clauses.
In order to help to default extraction behavior, boost fields can be configured, so that fields that are known for not being
selective enough can be ignored in favor for other fields or clauses with specific fields can forcefully take precedence over other clauses.
This can help selecting clauses for fields that don't match with a lot of percolator queries over other clauses and thus improving performance of the percolate query.
For example a status like field is something that should configured as an ignore field.
Queries on this field tend to match with more documents and so if clauses for this fields
get selected as best clause then that isn't very helpful for the candidate query that the
percolate query generates to filter out percolator queries that are likely not going to match.
We introduced a hack in #25885 to respect the cluster alias if available on the `_index` field. This is important if aggregations or other field data related operations are executed. Yet, we added a small hack that duplicated an implementation detail from the `_index` field data builder to make this work. This change adds a necessary but simple API change that allows us to remove the hack and only have a single implementation.
The Writeble representation is less heavy to parse and that will benefit percolate performance and throughput.
The query builder's binary format has now the same bwc guarentees as the xcontent format.
Added a qa test that verifies that percolator queries written in older versions are still readable by the current version.
This change merges the functionality of the FiltersFunctionScoreQuery in the FunctionScoreQuery.
It also ensures that an exception is thrown when the computed score is equals to Float.NaN or Float.NEGATIVE_INFINITY.
These scores are invalid for TopDocsCollectors that relies on score comparison.
Fixes#15709Fixes#23628
Extracts ranges from range queries on byte, short, integer, long, half_float, scaled_float, float, double, date and ip fields.
byte, short, integer and date ranges are normalized to Lucene's LongRange.
half_float and float are normalized to Lucene's DoubleRange.
When extracting range queries, the QueryAnalyzer computes the width of the range. This width is used to determine
what range should be preferred in a conjunction query. The QueryAnalyzer prefers the smaller ranges, because these
ranges tend to match with less documents.
Closes#21040
Today when we aggregate on the `_index` field the cross cluster search
alias is not taken into account. Neither is it respected when we search
on the field. This change adds support for cluster alias when the cluster
alias is present on the `_index` field.
Closes#25606
This change rewrites search requests on the coordinating node before
we send requests to the individual shards. This will reduce the rewrite load
and object creation for each rewrite on the executing nodes and will fetch
resources only once instead of N times once per shard for queries like `terms`
query with index lookups. (among percolator and geo-shape)
Relates to #25791
The `QueryRewriteContext` used to provide a client object that can
be used to fetch geo-shapes, terms or documents for percolation. Unfortunately
all client calls used to be blocking calls which can have significant impact on the
rewrite phase since it occupies an entire search thread until the resource is
received. In the case that the index the resource is fetched from isn't on the local
node this can have significant impact on query throughput.
Note: this doesn't fix MLT since it fetches stuff in doQuery which is a different beast. Yet, it is a huge step in the right direction
Today we have duplicated code that is quite complicated to iterate
over rewriteable (`QueryBuilders` mainly) This change introduces a
`Rewriteable` interface that allow to share code to do the rewriting as
well as encapsulation and composition of queries.
We currently use fielddata on the `_id` field which is trappy, especially as we
do it implicitly. This changes the `random_score` function to use doc ids when
no seed is provided and to suggest a field when a seed is provided.
For now the change only emits a deprecation warning when no field is supplied
but this should be replaced by a strict check on 7.0.
Closes#25240
This commit does two things:
- bumps the version from 6.0.0-alpha3 to 6.0.0-beta1
- renames the 6.0.0-alpha3 version constant to 6.0.0-beta1
Relates #25621
QueryParseContext is currently only used as a wrapper for an XContentParser, so
this change removes it entirely and changes the appropriate APIs that use it so
far to only accept a parser instead.
Currently QueryParseContext is only a thin wrapper around an XContentParser that
adds little functionality of its own. I provides helpers for long deprecated
field names which can be removed and two helper methods that can be made static
and moved to other classes. This is a first step in helping to remove
QueryParseContext entirely.
Most notable changes:
- better update concurrency: LUCENE-7868
- TopDocs.totalHits is now a long: LUCENE-7872
- QueryBuilder does not remove the boolean query around multi-term synonyms:
LUCENE-7878
- removal of Fields: LUCENE-7500
For the `TopDocs.totalHits` change, this PR relies on the fact that the encoding
of vInts and vLongs are compatible: you can write and read with any of them as
long as the value can be represented by a positive int.
The `document_type` parameter is no longer required to be specified,
because by default from 6.0 only a single type is allowed. (`index.mapping.single_type` defaults to `true`)
This commit adds back "id" as the key within a script to specify a
stored script (which with file scripts now gone is no longer ambiguous).
It also adds "source" as a replacement for "code". This is in an attempt
to normalize how scripts are specified across both put stored scripts and script usages, including search template requests. This also deprecates the old inline/stored keys.
This commit modifies query_string, simple_query_string and multi_match queries to always use a DisjunctionMaxQuery when a disjunction over multiple fields is built. The tiebreaker is set to 1 in order to behave like the boolean query in terms of scoring.
The removal of the coord factor in Lucene 7 made this change mandatory to correctly handle minimum_should_match.
Closes#23966
The `scorerSupplier` API allows to give a hint to queries in order to let them
know that they will be consumed in a random-access fashion. We should use this
for aggregations, function_score and matched queries.
This change moves the parent_id query to the parent-join module and handles the case when only the parent-join field can be declared on an index (index with single type on).
If single type is off it uses the legacy parent join field mapper and switch to the new one otherwise (default in 6).
Relates #20257
Approaching the release of 6.0 we need to sort out the usage of
`Version#minimumCompatibilityVersion` which was still set to 5.0.0.
Now this change moves it to the latest released version of 5.x (5.4 at this point)
to ensure we are compatible with the latest minor of the previous major. This change
also removes all the `_UNRELEASED` from the versions that where released and drops versions
that were never released and are not expected to be released (bugfixes in minors that are not
the latest in the previous major).
This commit renames all rest test files to use the .yml extension
instead of .yaml. This way the extension used within all of
elasticsearch for yaml is consistent.
Range queries with now based date ranges were previously not allowed,
but since #23921 these queries were allowed. This change should really
fix range queries with now based date ranges.
* Add parent-join module
This change adds a new module named `parent-join`.
The goal of this module is to provide a replacement for the `_parent` field but as a first step this change only moves the `has_child`, `has_parent` queries and the `children` aggregation to this module.
These queries and aggregations are no longer in core but they are deployed by default as a module.
Relates #20257
This adds the `index.mapping.single_type` setting, which enforces that indices
have at most one type when it is true. The default value is true for 6.0+ indices
and false for old indices.
Relates #15613
The percolator doesn't close the IndexReader of the memory index any more.
Prior to 2.x the percolator had its own SearchContext (PercolatorContext) that did this,
but that was removed when the percolator was refactored as part of the 5.0 release.
I think an alternative way to fix this is to let percolator not use the bitset and fielddata caches,
that way we prevent the memory leak.
Closes#24108
This change simplifies how the rest test runner finds test files and
removes all leniency. Previously multiple prefixes and suffixes would
be tried, and tests could exist inside or outside of the classpath,
although outside of the classpath never quite worked. Now only classpath
tests are supported, and only one resource prefix is supported,
`/rest-api-spec/tests`.
closes#20240
We want to upgrade to Lucene 7 ahead of time in order to be able to check whether it causes any trouble to Elasticsearch before Lucene 7.0 gets released. From a user perspective, the main benefit of this upgrade is the enhanced support for sparse fields, whose resource consumption is now function of the number of docs that have a value rather than the total number of docs in the index.
Some notes about the change:
- it includes the deprecation of the `disable_coord` parameter of the `bool` and `common_terms` queries: Lucene has removed support for coord factors
- it includes the deprecation of the `index.similarity.base` expert setting, since it was only useful to configure coords and query norms, which have both been removed
- two tests have been marked with `@AwaitsFix` because of #23966, which we intend to address after the merge
Before now ranges where forbidden, because the percolator query itself could get cached and then the percolator queries with now ranges that should no longer match, incorrectly will continue to match.
By disabling caching when the `percolator` is being used, the percolator can now correctly support range queries with now based ranges.
I think this is the right tradeoff. The percolator query is likely to not be the same between search requests and disabling range queries with now ranges really disabled people using the percolator for their use cases.
Also fixed an issue that existed in the percolator fieldmapper, it was unable to find forbidden queries inside `dismax` queries.
Closes#23859
This commit renames the random ASCII helper methods in ESTestCase. This
is because this method ultimately uses the random ASCII methods from
randomized runner, but these methods actually only produce random
strings generated from [a-zA-Z].
Relates #23886
Removed `parse(String index, String type, String id, BytesReference source)` in DocumentMapper.java and replaced all of its use in Test files with `parse(SourceToParse source)`.
`parse(String index, String type, String id, BytesReference source)` was only used in test files and never in the main code so it was removed. All of the test files that used it was then modified to use `parse(SourceToParse source)` method that existing in DocumentMapper.java
We have many version constants in master that have already been
released, but are still marked (by naming convention) as unreleased.
This commit renames those version constants.
We have a bunch of interfaces that have only a single implementation
for 6 years now. These interfaces are pretty useless from a SW development
perspective and only add unnecessary abstractions. They also require
lots of casting in many places where we expect that there is only one
concrete implementation. This change removes the interfaces, makes
all of the classes final and removes the duplicate `foo` `getFoo` accessors
in favor of `getFoo` from these classes.
This commit upgrades the checkstyle configuration from version 5.9 to
version 7.5, the latest version as of today. The main enhancement
obtained via this upgrade is better detection of redundant modifiers.
Relates #22960
This change adds a strict mode for xcontent parsing on the rest layer. The strict mode will be off by default for 5.x and in a separate commit will be enabled by default for 6.0. The strict mode, which can be enabled by setting `http.content_type.required: true` in 5.x, will require that all incoming rest requests have a valid and supported content type header before the request is dispatched. In the non-strict mode, the Content-Type header will be inspected and if it is not present or not valid, we will continue with auto detection of content like we have done previously.
The content type header is parsed to the matching XContentType value with the only exception being for plain text requests. This value is then passed on with the content bytes so that we can reduce the number of places where we need to auto-detect the content type.
As part of this, many transport requests and builders were updated to provide methods that
accepted the XContentType along with the bytes and the methods that would rely on auto-detection have been deprecated.
In the non-strict mode, deprecation warnings are issued whenever a request with body doesn't provide the Content-Type header.
See #19388
Removes `AggregatorParsers`, replacing all of its functionality with
`XContentParser#namedObject`.
This is the third bit of payoff from #22003, one less thing to pass
around the entire application.
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
Introduces `XContentParser#namedObject which works a little like
`StreamInput#readNamedWriteable`: on startup components register
parsers under names and a superclass. At runtime we look up the
parser and call it to parse the object.
Right now the parsers take a context object they use to help with
the parsing but I hope to be able to eliminate the need for this
context as most what it is used for at this point is to move
around parser registries which should be replaced by this method
eventually. I make no effort to do so in this PR because it is
big enough already. This is meant to the a start down a road that
allows us to remove classes like `QueryParseContext`,
`AggregatorParsers`, `IndicesQueriesRegistry`, and
`ParseFieldRegistry`.
The goal here is to reduce the amount of plumbing required to
allow parsing pluggable things. With this you don't have to pass
registries all over the place. Instead you must pass a super
registry to fewer places and use it to wrap the reader. This is
the same tradeoff that we use for NamedWriteable and it allows
much, much simpler binary serialization. We think we want that
same thing for xcontent serialization.
The only parsing actually converted to this method is parsing
`ScoreFunctions` inside of `FunctionScoreQuery`. I chose this
because it is relatively self contained.
This commit makes mapping updates atomic when multiple types in an index are updated. Mappings for an index are now applied in a single atomic operation, which also allows to optimize some of the cross-type updates and checks.
With this commit we enable the Jackson feature 'STRICT_DUPLICATE_DETECTION'
by default. This ensures that JSON keys are always unique. While this has
a performance impact, benchmarking has indicated that the typical drop in
indexing throughput is around 1 - 2%.
As a last resort, we allow users to still disable strict duplicate checks
by setting `-Des.json.strict_duplicate_detection=false` which is
intentionally undocumented.
Closes#19614
Our query DSL supports empty queries (`{}`), which have a different meaning depending on the query that holds it, either ignored, match_all or match_none. We deprecated the support for empty queries in 5.0, where we log a deprecation warning wherever they are used.
The way we supported it once we moved query parsing to the coordinating node was having an Optional<QueryBuilder> return type in all of our parse methods (called fromXContent). See #17624. The central place for this was QueryParseContext#parseInnerQueryBuilder. We can now remove all the optional return types and simply throw an exception whenever an empty query is found.
To get #22003 in cleanly we need to centralize as much `XContentParser` creation as possible into `RestRequest`. That'll mean we have to plumb the `NamedXContentRegistry` into fewer places.
This removes `RestAction.hasBody`, `RestAction.guessBodyContentType`, and `RestActions.getRestContent`, moving callers over to `RestRequest.hasContentOrSourceParam`, `RestRequest.contentOrSourceParam`, and `RestRequest.contentOrSourceParamParser` and `RestRequest.withContentOrSourceParamParserOrNull`. The idea is to use `withContentOrSourceParamParserOrNull` if you need to handle requests without any sort of body content and to use `contentOrSourceParamParser` otherwise.
I believe the vast majority of this PR to be purely mechanical but I know I've made the following behavioral change (I'll add more if I think of more):
* If you make a request to an endpoint that requires a request body and has cut over to the new APIs instead of getting `Failed to derive xcontent` you'll get `Body required`.
* Template parsing is now non-strict by default. This is important because we need to be able to deprecate things without requests failing.
This adds the `_primary_term` field internally to the mappings. This field is
populated with the current shard's primary term.
It is intended to be used for collision resolution when two document copies have
the same sequence id, therefore, doc_values for the field are stored but the
filed itself is not indexed.
This also fixes the `_seq_no` field so that doc_values are retrievable (they
were previously stored but irretrievable) and changes the `stats` implementation
to more efficiently use the points API to retrieve the min/max instead of
iterating on each doc_value value. Additionally, even though we intend to be
able to search on the field, it was previously not searchable. This commit makes
it searchable.
There is no user-visible `_primary_term` field. Instead, the fields are
updated by calling:
```java
index.parsedDoc().updateSeqID(seqNum, primaryTerm);
```
This includes example methods in `Versions` and `Engine` for retrieving the
sequence id values from the index (see `Engine.getSequenceID`) that are only
used in unit tests. These will be extended/replaced by actual implementations
once we make use of sequence numbers as a conflict resolution measure.
Relates to #10708
Supercedes #21480
P.S. As a side effect of this commit, `SlowCompositeReaderWrapper` cannot be
used for documents that contain `_seq_no` because it is a Point value and SCRW
cannot wrap documents with points, so the tests have been updated to loop
through the `LeafReaderContext`s now instead.
This adds a fromXContent method and unit test to the HighlightField class so we
can parse it as part of a serch response. This is part of the preparation for
parsing search responses on the client side.
For the record, I also had to remove the geo-hash cell and geo-distance range
queries to make the code compile. These queries already throw an exception in
all cases with 5.x indices, so that does not hurt any more.
I also had to rename all 2.x bwc indices from `index-${version}` to
`unsupported-${version}` to make `OldIndexBackwardCompatibilityIT`
happy.
Lucene 6.2 added index and query support for numeric ranges. This commit adds a new RangeFieldMapper for indexing numeric (int, long, float, double) and date ranges and creating appropriate range and term queries. The design is similar to NumericFieldMapper in that it uses a RangeType enumerator for implementing the logic specific to each type. The following range types are supported by this field mapper: int_range, float_range, long_range, double_range, date_range.
Lucene does not provide a DocValue field specific to RangeField types so the RangeFieldMapper implements a CustomRangeDocValuesField for handling doc value support.
When executing a Range query over a Range field, the RangeQueryBuilder has been enhanced to accept a new relation parameter for defining the type of query as one of: WITHIN, CONTAINS, INTERSECTS. This provides support for finding all ranges that are related to a specific range in a desired way. As with other spatial queries, DISJOINT can be achieved as a MUST_NOT of an INTERSECTS query.
* Scripting: Remove groovy scripting language
Groovy was deprecated in 5.0. This change removes it, along with the
legacy default language infrastructure in scripting.
* master: (516 commits)
Avoid angering Log4j in TransportNodesActionTests
Add trace logging when aquiring and releasing operation locks for replication requests
Fix handler name on message not fully read
Remove accidental import.
Improve log message in TransportNodesAction
Clean up of Script.
Update Joda Time to version 2.9.5 (#21468)
Remove unused ClusterService dependency from SearchPhaseController (#21421)
Remove max_local_storage_nodes from elasticsearch.yml (#21467)
Wait for all reindex subtasks before rethrottling
Correcting a typo-Maan to Man-in README.textile (#21466)
Fix InternalSearchHit#hasSource to return the proper boolean value (#21441)
Replace all index date-math examples with the URI encoded form
Fix typos (#21456)
Adapt ES_JVM_OPTIONS packaging test to ubuntu-1204
Add null check in InternalSearchHit#sourceRef to prevent NPE (#21431)
Add VirtualBox version check (#21370)
Export ES_JVM_OPTIONS for SysV init
Skip reindex rethrottle tests with workers
Make forbidden APIs be quieter about classpath warnings (#21443)
...
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
The `IndexService#newQueryShardContext()` method creates a QueryShardContext on
shard `0`, with a `null` reader and that uses `System.currentTimeMillis()` to
resolve `now`. This may hide bugs, since the shard id is sometimes used for
query parsing (it is used to salt random score generation in `function_score`),
passing a `null` reader disables query rewriting and for some use-cases, it is
simply not ok to rely on the current timestamp (eg. percolation). So this pull
request removes this method and instead requires that all call sites provide
these parameters explicitly.
Simon Willnauer
Martijn van Groningen
Colin Goodheart-Smithe
Tanguy Leroux
Jim Ferenczi
Adrien Grand
Yannick Welsch
Jason Tedor
Christoph Büscher
Ryan Ernst
AdityaJNair
jaymode
Jay Modi
javanna
Nik Everett
Daniel Mitterdorfer
Luca Cavanna
Lee Hinman
Nicholas Knize
Boaz Leskes
Jack Conradson