QueryBuilder has generics, but those are never used: all call sites use
`QueryBuilder<?>`. Only `AbstractQueryBuilder` needs generics so that the base
class can contain a default implementation for setters that returns `this`.
We have both `Settings.settingsBuilder` and `Settings.builder` that do exactly
the same thing, so we should keep only one. I kept `Settings.builder` since it
has my preference but also it is the one that we use in examples of the Java API.
This commit removes and forbids the use of lowercase ells ('l') in long
literals because they are often hard to distinguish from the digit
representing one ('1').
Closes#16329
In the early days Elasticsearch used to use the index name as the index identity. Around 1.0.0 we introduced a unique index uuid which is stored in the index setting. Since then we used that uuid in a few places but it is by far not the main identifier when working with indices, partially because it's not always readily available in all places.
This PR start to make a move in the direction of using uuids instead of name by making sure that the uuid is available on the Index class (currently just a wrapper around the name) and as such also available via ShardRouting and ShardId.
Note that this is by no means an attempt to do the right thing with the uuid in all places. In almost all places it falls back to the name based comparison that was done before. It is meant as a first step towards slowly improving the situation.
Closes#16217
The rest test framework, because it used to be tightly integrated with
ESIntegTestCase, currently expects the addresses for the test cluster to
be passed using the transport protocol port. However, it only uses this
to then find the http address.
This change makes ESRestTestCase extend from ESTestCase instead of
ESIntegTestCase, and changes the sysprop used to tests.rest.cluster,
which now takes the http address.
closes#15459
ContextAndHeaders has a massive impact on the core infrastructure since it has to
be manually passed on to all relevant places across threads/network calls etc. For the same reason
it's also very error prone and easily forgotten on potentially relevant APIs.
The new ThreadContext is associated with a ThreadPool (node or transport client) and ensures that
headers and context registered on a current thread are inherited to new threads spawned, send across
the network to be deserialized on the receiver end as well as restored on the response handling thread
once the response is received.
Right now we define the same sort of methods as taking String arrays and
string varargs. We should standardize on one and varargs is easier to
call so lets use varargs!
Adds task manager class and enables all activities to register with the task manager. Currently, the immutable Transport*Activity class represents activity itself shared across all requests. This PR adds and an additional structure Task that keeps track of currently running requests and can be used to communicate with these requests using TransportTaskAction.
Related to #15117
We have the Text API, which is essentially a wrapper around a String and a
BytesReference and then we have 3 implementations depending on whether the
String view should be cached, the BytesReference view should be cached, or both
should be cached.
This commit merges everything into a single Text that is essentially the old
StringAndBytesText impl.
Long term we should look into whether this API has any performance benefit or
if we could just use plain strings. This would greatly simplify all our other
APIs that currently use Text.
This change adds back the http.type setting. It also cleans up all the
transport related guice code to be consolidated within the
NetworkModule (as transport and http related stuff is what and how ES
exposes over the network). The setter methods previously used by some
plugins to override eg the TransportService or HttpServerTransport are
removed, and those plugins should now register a custom implementation
of the class with a name and set that using the appropriate config
setting. Note that I think ActionModule should also be moved into here,
to sit along side the rest actions, but I left that for a followup.
closes#14148
IndexResponse, DeleteResponse and UpdateResponse share some logic. This can be unified to a single DocWriteResponse base class. On top, some replication actions are now not about write operations anymore. This commit renames ActionWriteResponse to ReplicationResponse
Last some toXContent is moved from the Rest layer to the actual response classes, for more code re-sharing.
Closes#15334
This change removes the leftover pom files. A couple files were left for
reference, namely in qa tests that have not yet been migrated (vagrant
and multinode). The deb and rpm assemblies also still exist for
reference when finishing their setup in gradle.
See #13930
We have two types of parse methods for queries: one for the inner query, to be used once the parser is positioned within the query element, and one for the whole query source, including the query element that wraps the actual query.
With the search refactoring we ended up using the former in count, cat count and delete by query, whereas we should have used the former. It ends up working properly given that we have a registered (deprecated) query called "query", which used to allow to wrap a filter into a query, but this has the following downsides:
1) prevents us from removing the deprecated "query" query
2) we end up supporting a top level query that is not wrapped within a query element (pre 1.0 syntax iirc that shouldn't be supported anymore)
This commit finally removes the "query" query and fixes the related parsing bugs. We also had some tests that were providing queries in the wrong format, those have been fixed too.
Closes#13326Closes#14304
There are three ways `@Test` was used. Way one:
```java
@Test
public void flubTheBlort() {
```
This way was always replaced with:
```java
public void testFlubTheBlort() {
```
Or, maybe with a better method name if I was feeling generous.
Way two:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
methodThatThrows();
}
```
This way of using `@Test` is actually pretty OK, but to get the tools to ban
`@Test` entirely it can't be used. Instead:
```java
public void testFoo() {
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
This is longer but tests more than the old ways and is much more precise.
Compare:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
methodThatThrows();
code(); // <---- This was left here by mistake and is never called
}
```
to:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
The final use of test is:
```java
@Test(timeout=1000)
public void testFoo() {
methodThatWasSlow();
}
```
This is the most insidious use of `@Test` because its tempting but tragically
flawed. Its flaws are:
1. Hard and fast timeouts can look like they are asserting that something is
faster and even do an ok job of it when you compare the timings on the same
machine but as soon as you take them to another machine they start to be
invalid. On a slow VM both the new and old methods fail. On a super-fast
machine the slower and faster ways succeed.
2. Tests often contain slow `assert` calls so the performance of tests isn't
sure to predict the performance of non-test code.
3. These timeouts are rude to debuggers because the test just drops out from
under it after the timeout.
Confusingly, timeouts are useful in tests because it'd be rude for a broken
test to cause CI to abort the whole build after it hits a global timeout. But
those timeouts should be very very long "backstop" timeouts and aren't useful
assertions about speed.
For all its flaws `@Test(timeout=1000)` doesn't have a good replacement __in__
__tests__. Nightly benchmarks like http://benchmarks.elasticsearch.org/ are
useful here because they run on the same machine but they aren't quick to check
and it takes lots of time to figure out the regressions. Sometimes its useful
to compare dueling implementations but that requires keeping both
implementations around. All and all we don't have a satisfactory answer to the
question "what do you replace `@Test(timeout=1000)`" with. So we handle each
occurrence on a case by case basis.
For files with `@Test` this also:
1. Removes excess blank lines. They don't help anything.
2. Removes underscores from method names. Those would fail any code style
checks we ever care to run and don't add to readability. Since I did this manually
I didn't do it consistently.
3. Make sure all test method names start with `test`. Some used to end in `Test` or start
with `verify` or `check` and they were picked up using the annotation. Without the
annotation they always need to start with `test`.
4. Organizes imports using the rules we generate for Eclipse. For the most part
this just removes `*` imports which is a win all on its own. It was "required"
to quickly remove `@Test`.
5. Removes unneeded casts. This is just a setting I have enabled in Eclipse and
forgot to turn off before I did this work. It probably isn't hurting anything.
6. Removes trailing whitespace. Again, another Eclipse setting I forgot to turn
off that doesn't hurt anything. Hopefully.
7. Swaps some tests override superclass tests to make them empty with
`assumeTrue` so that the reasoning for the skips is logged in the test run and
it doesn't "look like" that thing is being tested when it isn't.
8. Adds an oxford comma to an error message.
The total test count doesn't change. I know. I counted.
```bash
git checkout master && mvn clean && mvn install | tee with_test
git no_test_annotation master && mvn clean && mvn install | tee not_test
grep 'Tests summary' with_test > with_test_summary
grep 'Tests summary' not_test > not_test_summary
diff with_test_summary not_test_summary
```
These differ somewhat because some tests are skipped based on the random seed.
The total shouldn't differ. But it does!
```
1c1
< [INFO] Tests summary: 564 suites (1 ignored), 3171 tests, 31 ignored (31 assumptions)
---
> [INFO] Tests summary: 564 suites (1 ignored), 3167 tests, 17 ignored (17 assumptions)
```
These are the core unit tests. So we dig further:
```bash
cat with_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > with_test_suites
cat not_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > not_test_suites
diff <(sort with_test_suites) <(sort not_test_suites)
```
The four tests with lower test numbers are all extend `AbstractQueryTestCase`
and all have a method that looks like this:
```java
@Override
public void testToQuery() throws IOException {
assumeTrue("test runs only when at least a type is registered", getCurrentTypes().length > 0);
super.testToQuery();
}
```
It looks like this method was being double counted on master and isn't anymore.
Closes#14028
We moved a lot of repositories into elasticsearch, but in their new
location they retained their LICENSE.txt and NOTICE.txt files. These are
all the same, and having the license and notice and the root of the
repository should be sufficient.
Plugin tests require having rest-api tests, and currently copy that spec
from a directory in the root of the plugin source into the test
resources. This change moves the rest-api-spec dir into test resources
so it is like any other test resources. It also removes unnecessary
configuration for resources from the shared plugin pom.
When running a RestIT test from the IDE, you actually start an internal node which does not automatically load the plugin you would like to test.
We need to add:
```java
@Override
protected Collection<Class<? extends Plugin>> nodePlugins() {
return pluginList(PLUGIN_HERE.class);
}
```
Everything works fine when running from maven because each test basically:
* installs elasticsearch
* installs one plugin
* starts elasticsearch with this plugin loaded
* runs the test
Note that this PR only fixes the fact we run an internal cluster with the expected plugin.
Cloud tests will still fail when run from the IDE because is such a case you actually start an internal node with many mock plugins.
And REST test suite for cloud plugins basically checks if the plugin is running by checking the output of NodesInfo API.
And we check:
```yml
- match: { nodes.$master.plugins.0.name: cloud-azure }
- match: { nodes.$master.plugins.0.jvm: true }
```
But in that case, this condition is certainly false as we started also `mock-transport-service`, `mock-index-store`, `mock-engine-factory`, `node-mocks`, `asserting-local-transport`, `mock-search-service`.
Closes#13479
Java 8 allows for method references which in-turn will cause
compile errors if a method is not visible while reflection fails late
and maybe too late. We can now register Request instances via FooRequest::new
instead of passing FooRequest.class and call it's ctor via reflection.
In addition to being a big security problem, setAccessible is a risk
for java 9 migration. We need to clean up our code so we can ban it
and eventually enforce this with security manager for third-party code, too,
or we may have problems.
Instead of using setAccessible, use the correct modifier (e.g. public).
TODO: ban in tests
TODO: ban in security manager at runtime
Adrien Grand
Tanguy Leroux
Ryan Ernst
Nik Everett
Clinton Gormley
Yannick Welsch
Jason Tedor
Boaz Leskes
Simon Willnauer
Igor Motov
David Pilato
Robert Muir
javanna
Colin Goodheart-Smithe
Christoph Büscher
Robert Muir