We inject an Unfollow action before Shrink because the Shrink action
cannot be safely used on a following index, as it may not be fully
caught up with the leader index before the "original" following index is
deleted and replaced with a non-following Shrunken index. The Unfollow
action will verify that 1) the index is marked as "complete", and 2) all
operations up to this point have been replicated from the leader to the
follower before explicitly disconnecting the follower from the leader.
Injecting an Unfollow action before the Rollover action is done mainly
as a convenience: This allow users to use the same lifecycle policy on
both the leader and follower cluster without having to explictly modify
the policy to unfollow the index, while doing what we expect users to
want in most cases.
* Use ILM for Watcher history deletion
This commit adds an index lifecycle policy for the `.watch-history-*` indices.
This policy is automatically used for all new watch history indices.
This does not yet remove the automatic cleanup that the monitoring plugin does
for the .watch-history indices, and it does not touch the
`xpack.watcher.history.cleaner_service.enabled` setting.
Relates to #32041
This change adds the unfollow action for CCR follower indices.
This is needed for the shrink action in case an index is a follower index.
This will give the follower index the opportunity to fully catch up with
the leader index, pause index following and unfollow the leader index.
After this the shrink action can safely perform the ilm shrink.
The unfollow action needs to be added to the hot phase and acts as
barrier for going to the next phase (warm or delete phases), so that
follower indices are being unfollowed properly before indices are expected
to go in read-only mode. This allows the force merge action to execute
its steps safely.
The unfollow action has three steps:
* `wait-for-indexing-complete` step: waits for the index in question
to get the `index.lifecycle.indexing_complete` setting be set to `true`
* `wait-for-follow-shard-tasks` step: waits for all the shard follow tasks
for the index being handled to report that the leader shard global checkpoint
is equal to the follower shard global checkpoint.
* `pause-follower-index` step: Pauses index following, necessary to unfollow
* `close-follower-index` step: Closes the index, necessary to unfollow
* `unfollow-follower-index` step: Actually unfollows the index using
the CCR Unfollow API
* `open-follower-index` step: Reopens the index now that it is a normal index
* `wait-for-yellow` step: Waits for primary shards to be allocated after
reopening the index to ensure the index is ready for the next step
In the case of the last two steps, if the index in being handled is
a regular index then the steps acts as a no-op.
Relates to #34648
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Gordon Brown <gordon.brown@elastic.co>
The "include_type_name" parameter was temporarily introduced in #37285 to facilitate
moving the default parameter setting to "false" in many places in the documentation
code snippets. Most of the places can simply be reverted without causing errors.
In this change I looked for asciidoc files that contained the
"include_type_name=true" addition when creating new indices but didn't look
likey they made use of the "_doc" type for mappings. This is mostly the case
e.g. in the analysis docs where index creating often only contains settings. I
manually corrected the use of types in some places where the docs still used an
explicit type name and not the dummy "_doc" type.
This commit adds a set_priority action to the hot, warm, and cold
phases for an ILM policy. This action sets the `index.priority`
on the managed index to allow different priorities between the
hot, warm, and cold recoveries.
This commit also includes the HLRC and documentation changes.
closes#36905
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
Previously these were only linked in a circuitous way rather than being
available from the top level API documentation and "Put Lifecycle" API docs.
This makes them slightly easier to find for a user.
There are a handful of examples in the ILM documentation that could result in
rolling over indices more quickly than we might normally recommend,
contributing to over-sharding in cases where the examples are copied without
modification. This change makes some numbers bigger to try and avoid this.
This extra scenario describes the case where an updated
policy increases the current phase's `min_age`. Now, the
docs explicitly describe this scenario as to what is
expected -- old min_age is used.
Closes#35356.
Leaving `index.lifecycle.indexing_complete` in place when removing the
lifecycle policy from an index can cause confusion, as if a new policy
is associated with the policy, rollover will be silently skipped.
Removing that setting when removing the policy from an index makes
associating a new policy with the index more involved, but allows ILM to
fail loudly, rather than silently skipping operations which the user may
assume are being performed.
* Adjust order of checks in WaitForRolloverReadyStep
This allows ILM to error out properly for indices that have a valid
alias, but are not the write index, while still handling
`indexing_complete` on old-style aliases and rollover (that is, those
which only point to a single index at a time with no explicit write
index)
Adds a setting that indicates that an index is done indexing, set by ILM
when the Rollover action completes. This indicates that the Rollover
action should be skipped in any future invocations, as long as the index
is no longer the write index for its alias.
This enables 1) an index with a policy that involves the Rollover action
to have the policy removed and switched to another one without use of
the move-to-step API, and 2) integrations with Beats and CCR.
This commit documents how Index Lifecycle Management
interacts with snapshot/restore, and documents a workaround
for situations in which ILM should not immediately resume
managing an index after it is restored.
This adds an example to drive home the semantics of `min_age` and explain
how actions from one phase must complete before `min_age` is even tested
closes#34020.
RolloverStep previously had a name of "attempt_rollover", which was
inconsistent with all other step names due it its use of an underscore
instead of a dash.
RolloverAction will now periodically check the rollover conditions using
the Rollover API with the dry_run option as an AsyncWaitStep, then run
the rollover itself by calling the Rollover API with no conditions,
which will always roll over, as an AsyncActionStep. This will resolve
race condition issues in policies using RolloverAction.
The docs are not resilient to timing issues where the ILM metadata is not set on newly
created indices, so we shouldn't be so strict on the returned response
* [ILM] Add documentation for error handling in ILM
This adds some initial documentation for error handling and retrying failed
steps for index lifecycle management
* [DOCS] ILM API Ref edits
* [DOCS] Fixed endpoint for DELETE policy.
* [DOCS] Removed comparison to setting index.lifecycle.name to null.
* [DOCS] Fixed xrefs to explain API.
The remove-ilm-from-index API was using the DELETE http method
to signify that something is being removed. Although, metadata
about ILM for the index is being deleted, no entity/resource
is being deleted during this operation. POST is more in line with
what this API is actually doing, it is modifying the metadata for
an index. As part of this change, `remove` is also appended to the path
to be more explicit about its actions.
This commit removes the Joda time usage from ILM and the HLRC components of ILM.
It also fixes an issue where using the `?human=true` flag could have caused the
parser not to work. These millisecond fields now follow the standard we use
elsewhere in the code, with additional fields added iff the `human` flag is
specified.
This is a breaking change for ILM, but since ILM has not yet been released, no
compatibility shim is needed.
This PR renames the CRUD APIS for ILM
GET _ilm/<policy>, _ilm -> _ilm/policy/<policy>, _ilm/policy
PUT _ilm/<policy> -> _ilm/policy/<policy>
DELETE _ilm/<policy> -> _ilm/policy/<policy>
closes#34929.
Gordon Brown
Lee Hinman
Martijn van Groningen
Christoph Büscher
Jake Landis
Julie Tibshirani
Josh Soref
Tal Levy
David Turner
Lisa Cawley
Gil Raphaelli
debadair
Gordon Brown
Colin Goodheart-Smithe