If a terms aggregation was ordered by a metric nested in a single bucket aggregator which did not collect any documents (e.g. a filters aggregation which did not match in that term bucket) an ArrayOutOfBoundsException would be thrown when the ordering code tried to retrieve the value for the metric. This fix fixes all numeric metric aggregators so they return their default value when a bucket ordinal is requested which was not collected.
Closes#17225
This adds a new `/_cluster/allocation/explain` API that explains why a
shard can or cannot be allocated to nodes in the cluster. Additionally,
it will show where the master *desires* to put the shard, according to
the `ShardsAllocator`.
It looks like this:
```
GET /_cluster/allocation/explain?pretty
{
"index": "only-foo",
"shard": 0,
"primary": false
}
```
Though, you can optionally send an empty body, which means "explain the
allocation for the first unassigned shard you find".
The output when a shard is unassigned looks like this:
```
{
"shard" : {
"index" : "only-foo",
"index_uuid" : "KnW0-zELRs6PK84l0r38ZA",
"id" : 0,
"primary" : false
},
"assigned" : false,
"unassigned_info" : {
"reason" : "INDEX_CREATED",
"at" : "2016-03-22T20:04:23.620Z"
},
"nodes" : {
"V-Spi0AyRZ6ZvKbaI3691w" : {
"node_name" : "Susan Storm",
"node_attributes" : {
"bar" : "baz"
},
"final_decision" : "NO",
"weight" : 0.06666675,
"decisions" : [ {
"decider" : "filter",
"decision" : "NO",
"explanation" : "node does not match index include filters [foo:\"bar\"]"
} ]
},
"Qc6VL8c5RWaw1qXZ0Rg57g" : {
"node_name" : "Slipstream",
"node_attributes" : {
"bar" : "baz",
"foo" : "bar"
},
"final_decision" : "NO",
"weight" : -1.3833332,
"decisions" : [ {
"decider" : "same_shard",
"decision" : "NO",
"explanation" : "the shard cannot be allocated on the same node id [Qc6VL8c5RWaw1qXZ0Rg57g] on which it already exists"
} ]
},
"PzdyMZGXQdGhqTJHF_hGgA" : {
"node_name" : "The Symbiote",
"node_attributes" : { },
"final_decision" : "NO",
"weight" : 2.3166666,
"decisions" : [ {
"decider" : "filter",
"decision" : "NO",
"explanation" : "node does not match index include filters [foo:\"bar\"]"
} ]
}
}
}
```
And when the shard *is* assigned, the output looks like:
```
{
"shard" : {
"index" : "only-foo",
"index_uuid" : "KnW0-zELRs6PK84l0r38ZA",
"id" : 0,
"primary" : true
},
"assigned" : true,
"assigned_node_id" : "Qc6VL8c5RWaw1qXZ0Rg57g",
"nodes" : {
"V-Spi0AyRZ6ZvKbaI3691w" : {
"node_name" : "Susan Storm",
"node_attributes" : {
"bar" : "baz"
},
"final_decision" : "NO",
"weight" : 1.4499999,
"decisions" : [ {
"decider" : "filter",
"decision" : "NO",
"explanation" : "node does not match index include filters [foo:\"bar\"]"
} ]
},
"Qc6VL8c5RWaw1qXZ0Rg57g" : {
"node_name" : "Slipstream",
"node_attributes" : {
"bar" : "baz",
"foo" : "bar"
},
"final_decision" : "CURRENTLY_ASSIGNED",
"weight" : 0.0,
"decisions" : [ {
"decider" : "same_shard",
"decision" : "NO",
"explanation" : "the shard cannot be allocated on the same node id [Qc6VL8c5RWaw1qXZ0Rg57g] on which it already exists"
} ]
},
"PzdyMZGXQdGhqTJHF_hGgA" : {
"node_name" : "The Symbiote",
"node_attributes" : { },
"final_decision" : "NO",
"weight" : 3.6999998,
"decisions" : [ {
"decider" : "filter",
"decision" : "NO",
"explanation" : "node does not match index include filters [foo:\"bar\"]"
} ]
}
}
}
```
Only "NO" decisions are returned by default, but all decisions can be
shown by specifying the `?include_yes_decisions=true` parameter in the
request.
Resolves#14593
Primary terms is a way to make sure that operations replicated from stale primary are rejected by shards following a newly elected primary.
Original PRs adding this to the seq# feature branch #14062 , #14651 . Unlike those PR, here we take a different approach (based on newer code in master) where the primary terms are stored in the meta data only (and not in `ShardRouting` objects).
Relates to #17038Closes#17044
Change version, required a minor fix in the RPM building.
In case of a alpha/beta version, the release will contain alpha/beta
as the RPM version cannot contains dashes/tildes.
The fielddata settings in mappings have been refatored so that:
- text and string have a `fielddata` (boolean) setting that tells whether it
is ok to load in-memory fielddata. It is true by default for now but the
plan is to make it default to false for text fields.
- text and string have a `fielddata_frequency_filter` which contains the same
thing as `fielddata.filter.frequency` used to (but validated at parsing time
instead of being unchecked settings)
- regex fielddata filtering is not supported anymore and will be dropped from
mappings automatically on upgrade.
- text, string and _parent fields have an `eager_global_ordinals` (boolean)
setting that tells whether to load global ordinals eagerly on refresh.
- in-memory fielddata is not supported on keyword fields anymore at all.
- the `fielddata` setting is not supported on other fields that text and string
and will be dropped when upgrading if specified.
this is the last step to remove node level service from IndexShard.
This means that tests can now more easily create an IndexShard instance
without starting a node and removes the dependency between IndexShard and Client/ScriptService
We current have a ClusterService interface, implemented by InternalClusterService and a couple of test classes. Since the decoupling of the transport service and the cluster service, one can construct a ClusterService fairly easily, so we don't need this extra indirection.
Closes#17183
Also replaced the PercolatorQueryRegistry with the new PercolatorQueryCache.
The PercolatorFieldMapper stores the rewritten form of each percolator query's xcontext
in a binary doc values field. This make sure that the query rewrite happens only during
indexing (some queries for example fetch shapes, terms in remote indices) and
the speed up the loading of the queries in the percolator query cache.
Because the percolator now works inside the search infrastructure a number of features
(sorting fields, pagination, fetch features) are available out of the box.
The following feature requests are automatically implemented via this refactoring:
Closes#10741Closes#7297Closes#13176Closes#13978Closes#11264Closes#10741Closes#4317
Today we allow to set all kinds of index level settings on the node level which
is error prone and difficult to get right in a consistent manner.
For instance if some analyzers are setup in a yaml config file some nodes might
not have these analyzers and then index creation fails.
Nevertheless, this change allows some selected settings to be specified on a node level
for instance:
* `index.codec` which is used in a hot/cold node architecture and it's value is really per node or per index
* `index.store.fs.fs_lock` which is also dependent on the filesystem a node uses
All other index level setting must be specified on the index level. For existing clusters the index must be closed
and all settings must be updated via the API on each of the indices.
Closes#16799
Without this commit fetching the status of a reindex from a node that isn't
coordinating the reindex will fail. This commit properly registers reindex's
status so this doesn't happen. To do so it moves all task status registration
into NetworkModule and creates a method to register other statuses which the
reindex plugin calls.
The build currently uses the old maven support in gradle. This commit
switches to use the newer maven-publish plugin. This will allow future
changes, for example, easily publishing to artifactory.
An additional part of this change makes publishing of build-tools part
of the normal publishing, instead of requiring a separate upload step
from within buildSrc. That also sets us up for a follow up to enable
precomit checks on the buildSrc code itself.
Today, certain bootstrap properties are set and read via system
properties. This action-at-distance way of managing these properties is
rather confusing, and completely unnecessary. But another problem exists
with setting these as system properties. Namely, these system properties
are interpreted as Elasticsearch settings, not all of which are
registered. This leads to Elasticsearch failing to startup if any of
these special properties are set. Instead, these properties should be
kept as local as possible, and passed around as method parameters where
needed. This eliminates the action-at-distance way of handling these
properties, and eliminates the need to register these non-setting
properties. This commit does exactly that.
Additionally, today we use the "-D" command line flag to set the
properties, but this is confusing because "-D" is a special flag to the
JVM for setting system properties. This creates confusion because some
"-D" properties should be passed via arguments to the JVM (so via
ES_JAVA_OPTS), and some should be passed as arguments to
Elasticsearch. This commit changes the "-D" flag for Elasticsearch
settings to "-E".
The ingest stats include the following statistics:
* `ingest.total.count`- The total number of document ingested during the lifetime of this node
* `ingest.total.time_in_millis` - The total time spent on ingest preprocessing documents during the lifetime of this node
* `ingest.total.current` - The total number of documents currently being ingested.
* `ingest.total.failed` - The total number ingest preprocessing operations failed during the lifetime of this node
Also these stats are returned on a per pipeline basis.
Currently, the cluster service is tightly coupled to the transport service by both managing node connections and requiring the bound address in order to create the local disco node. This commit introduces a new NodeConnectionsService which is in charge of node connection management and makes it possible to remove all network related calls from the cluster service. The local DiscoNode is now created by DiscoveryNodeService and is set both the cluster service and the transport service during node start up.
Closes#16788Closes#16872
Use index UUID to lookup indices on IndicesService
Today we use the index name to lookup index instances on the IndicesService
which applied to search requests but also to index deletion etc. This commit
moves the interface to expect an Index instance which is a tuple
and looks up the index by uuid rather than by name. This prevents accidental modification
of the wrong index if and index is recreated or searching from the wrong index in such a case.
Accessing an index that has the same name but different UUID will now result in an IndexNotFoundException.
Today we use the index name to lookup index instances on the IndicesService
which applied to search reqeusts but also to index deletion etc. This commit
moves the interface to expcet and `Index` instance which is a <name, uuid> tuple
and looks up the index by uuid rather than by name. This prevents accidential modificaiton
of the wrong index if and index is recreated or searching from the _wrong_ index in such a case.
Accessing an index that has the same name but different UUID will now result in an IndexNotFoundException.
Closes#17001
_wait_for_completion defaults to false. If set to true then the API will
wait for all the tasks that it finds to stop running before returning. You
can use the timeout parameter to prevent it from waiting forever. If you
don't set a timeout parameter it'll default to 30 seconds.
Also adds a log message to rest tests if any tasks overrun the test. This
is just a log (instead of failing the test) because lots of tasks are run
by the cluster on its own and they shouldn't cause the test to fail. Things
like fetching disk usage from the other nodes, for example.
Switches the request to getter/setter style methods as we're going that
way in the Elasticsearch code base. Reindex is all getter/setter style.
Closes#16906
Colin Goodheart-Smithe
Lee Hinman
Tanguy Leroux
Boaz Leskes
Alexander Reelsen
Honza Král
Adrien Grand
Simon Willnauer
Martijn van Groningen
Ryan Ernst
Christoph Büscher
Igor Motov
Nik Everett
Jason Tedor
Yannick Welsch
David Pilato
Ali Beyad
Jay Modi
jaymode
Simon Willnauer
Dongjoon Hyun