Deleting a type from an index is inherently dangerous because
the type can be recreated with new mappings which may conflict
with existing segments still using the old mappings. This
removes the ability to delete a type (similar to how deleting
fields within a type is not allowed, for the same reason).
closes#8877closes#10231
This commit changes the behaviour of the delete api when processing a delete request that refers to a type that has routing set to required in the mapping, and the routing is missing in the request. Up until now the delete api sent a broadcast delete request to all of the shards that belong to the index, making sure that the document could be found although the routing value wasn't specified. This was probably not the best choice: if the routing is set to required, an error should be thrown instead.
A `RoutingMissingException` gets now thrown instead, like it happens in the same situation with every other api (index, update, get etc.). Last but not least, this change allows to get rid of a couple of `TransportAction`s, `Request`s and `Response`s and simplify the codebase.
Closes#9123Closes#10136
There are two implications to this change.
First, percolator now uses _uid internally, extracting the id portion
when needed. Second, sorting on _id is no longer possible, since you
can no longer index _id. However, _uid can still be used to sort, and
is better anyways as indexing _id just to make it available to
fielddata for sorting is wasteful.
see #8143closes#9842
This change removes the deprecated script parameter names ('file', 'id', and 'scriptField').
It also removes the ability to load file scripts using the 'script' parameter. File scripts should be loaded using the 'script_file' parameter only.
This commit makes the `postings_format` and `doc_values_format` options of
mappings illegal on 2.0 and ignored on 1.x (meaning that the default postings
and doc values formats from the codec will be used in such a case).
This removes a fair amount of code.
Close#8746#9741
Removed the existing `pre_zone` and `post_zone` option in `date_histogram` in favor of
the simpler `time_zone` option. Previously, specifying different values for these could
lead to confusing scenarios where ES would return bucket keys that are not UTC.
Now `time_zone` is the only option setting, the calculation of date buckets to take place in the
preferred time zone, but after rounding converting the bucket key values back to UTC.
Closes#9062Closes#9637
When multiple fields under object fields share the same name, accessing
by short name is ambiguous. This removes support for short names,
always requiring the full name when used in queries.
closes#8872
Add offset option to 'date_histogram' replacing and simplifying the previous 'pre_offset' and 'post_offset' options.
This change is part of a larger clean up task for `date_histogram` from issue #9062.
This change makes the response API object for Histogram Aggregations the same for all types of Histogram, and does the same for all types of Ranges.
The change removes getBucketByKey() from all aggregations except filters and terms. It also reduces the methods on the Bucket class to just getKey() and getKeyAsString().
The getKey() method returns Object and the actual Type is returns will be appropriate for the type of aggregation being run. e.g. date_histogram will return a DateTime for this method and Histogram will return a Number.
Today we give the HTTP status back within the HTTP response itself and within the JSON response as well:
```sh
curl localhost:9200/
```
```js
{
"status" : 200,
"name" : "Red Wolf",
"version" : {
"number" : "2.0.0",
"build_hash" : "6837a61d8a646a2ac7dc8da1ab3c4ab85d60882d",
"build_timestamp" : "2014-08-19T13:55:56Z",
"build_snapshot" : true,
"lucene_version" : "4.9"
},
"tagline" : "You Know, for Search"
}
```
Before Elasticsearch 1.0, the type was allowed to be passed as the root
element when uploading a document. However, this was ambiguous if the
mappings also contained a field with the same name as the type. The
behavior was changed in 1.0 to not allow this, but a setting was added
for backwards compatibility. This change removes the setting for 2.0.
The header indicates to how many shard copies (primary and replicas shards) a write was supposed to go to, to how many
shard copies to write succeeded and potentially captures shard failures if writing into a replica shard fails.
For async writes it also includes the number of shards a write is still pending.
Closes#7994
This is our only cache which is not 'exact' and might allow for stalled results.
Additionally, a similar cache that we have and needs to perform lookups in other
indices in order to run queries is the script index, and for this index we rely
on the filesystem cache, so we should probably do the same with terms filters
lookups.
Close#9056
Related to #8667:
Some QueryBuilders have been deprecated in 1.x branches. We removed them in 2.0.
Removed
-------
* `textPhrase(...)`
* `textPhrasePrefix(...)`
* `textPhrasePrefixQuery(...)`
* `filtered(...)`
* `inQuery(...)`
* `commonTerms(...)`
* `queryString(...)`
* `simpleQueryString(...)`
Closes#8721.
We speak of the term vectors of a document, where each field has an associated
stored term vector. Since by default we are requesting all the term vectors of
a document, the HTTP request endpoint should rather be called `_termvectors`
instead of `_termvector`. The usage of `_termvector` is now deprecated, as
well as the transport client call to termVector and prepareTermVector.
Closes#8484
Previous to this change all features (_alias,_mapping,_settings,_warmer) are run regardless of which features are actually requested. This change fixes the request object to resolve this bug
We currently use the djb2 hash function in order to compute the shard a
document should go to. Unfortunately this hash function is not very
sophisticated and you can sometimes hit adversarial cases, such as numeric ids
on 33 shards.
Murmur3 generates hashes with a better distribution, which should avoid the
adversarial cases.
Here are some examples of how 100000 incremental ids are distributed to shards
using either djb2 or murmur3.
5 shards:
Murmur3: [19933, 19964, 19940, 20030, 20133]
DJB: [20000, 20000, 20000, 20000, 20000]
3 shards:
Murmur3: [33185, 33347, 33468]
DJB: [30100, 30000, 39900]
33 shards:
Murmur3: [2999, 3096, 2930, 2986, 3070, 3093, 3023, 3052, 3112, 2940, 3036, 2985, 3031, 3048, 3127, 2961, 2901, 3105, 3041, 3130, 3013, 3035, 3031, 3019, 3008, 3022, 3111, 3086, 3016, 2996, 3075, 2945, 2977]
DJB: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 900, 900, 900, 900, 1000, 1000, 10000, 10000, 10000, 10000, 9100, 9100, 9100, 9100, 9000, 9000, 0, 0, 0, 0, 0, 0]
Even if djb2 looks ideal in some cases (5 shards), the fact that the
distribution of its hashes has some patterns can raise issues with some shard
counts (eg. 3, or even worse 33).
Some tests have been modified because they relied on implementation details of
the routing hash function.
Close#7954
The MLT field query is simply replaced by a MLT query set to specififc field.
To simplify code maintenance we should deprecate it in 1.4 and remove it in
2.0.
Closes#8238
Returns information about settings, aliases, warmers, and mappings. Basically returns the IndexMetadata. This new endpoint replaces the /{index}/_alias|_aliases|_mapping|_mappings|_settings|_warmer|_warmers and /_alias|_aliases|_mapping|_mappings|_settings|_warmer|_warmers endpoints whilst maintaining the same response formats. The only exception to this is on the /_alias|_aliases|_warmer|_warmers endpoint which will now return a section for 'aliases' or 'warmers' even if no aliases or warmers exist. This backwards compatibility change is documented in the reference docs.
Closes#4069
Martijn van Groningen
Ryan Ernst
javanna
Clinton Gormley
Colin Goodheart-Smithe
Adrien Grand
Christoph Büscher
David Pilato
Alex Ksikes
Simon Willnauer