Today the keystore add-file command can only handle adding a single
setting/file pair in a single invocation. This incurs the startup costs
of the JVM many times, which in some environments can be expensive. This
commit teaches the add-file keystore command to accept adding multiple
settings in a single invocation.
Today the keystore add command can only handle adding a single
setting/value pair in a single invocation. This incurs the startup costs
of the JVM many times, which in some environments can be expensive. This
commit teaches the add keystore command to accept adding multiple
settings in a single invocation.
This drop the "top level" pipeline aggregators from the aggregation
result tree which should save a little memory and a few serialization
bytes. Perhaps more imporantly, this provides a mechanism by which we
can remove *all* pipelines from the aggregation result tree. This will
save quite a bit of space when pipelines are deep in the tree.
Sadly, doing this isn't simple because of backwards compatibility. Nodes
before 7.7.0 *need* those pipelines. We provide them by setting passing
a `Supplier<PipelineTree>` into the root of the aggregation tree that we
only call if we need to serialize to a version before 7.7.0.
This solution works for cross cluster search because we always reduce
the aggregations in each remote cluster and then forward them back to
the coordinating node. Its quite possible that the coordinating node
needs the pipeline (say it is version 7.1.0) and the gateway node in the
remote cluster doesn't (version 7.7.0). In that case the data nodes
won't send the pipeline aggregations back to the gateway node.
Critically, the gateway node *will* send the pipeline aggregations back
to the coordinating node. This is all managed with that
`Supplier<PipelineTree>`, but *how* it is managed is a bit tricky.
We can run into a state where there's no more events to wait for temporarily
but the cluster still isn't green. I added the wait for green flag to the request
so the assertion for green cluster health below doesn't fail.
Closes#53457
We are using this assertion for identical shard snapshots
for situations where `snapshot1` wasn't the first snapshot
for the tested shard. Hence, we can't assume that it will
not share any files with previous snapshots.
This showed up in failing tests when `snapshot1` was equivalent
to a previous snapshot because no documents were deleted from the
repo randomly in the failing test but even if documents are deleted
there is no guarantee that no files will be shared.
=> I removed this assertion since its immaterial for what is tested
here anyway.
Closes#54034
This commit ensures that we rewrite the shard request with a short-lived can_match searcher.
This is required for frozen indices since the high level rewrite is now performed on a network thread where we don't want to perform I/O.
Closes#53985
Reindex would use timeValueNanos(System.nanoTime()). The intended use
for TimeValue is as a duration, not as absolute time. In particular,
this could result in negative TimeValue's, being unsupported in #53913.
Modified to use the bare long nano-second value.
* Add validation for component templates (#54023)
* Add validation for component templates
This change adds validation to make sure that settings and mappings are correct in
component template. It's done the same way as in index templates - code is reused.
Reletes to #53101
* Fix checkstyle violation
* Update server/src/main/java/org/elasticsearch/cluster/metadata/MetaDataIndexTemplateService.java
Co-Authored-By: Lee Hinman <dakrone@users.noreply.github.com>
* Update server/src/test/java/org/elasticsearch/cluster/metadata/MetaDataIndexTemplateServiceTests.java
Co-Authored-By: Lee Hinman <dakrone@users.noreply.github.com>
* Update server/src/test/java/org/elasticsearch/cluster/metadata/MetaDataIndexTemplateServiceTests.java
Co-Authored-By: Lee Hinman <dakrone@users.noreply.github.com>
* Update server/src/test/java/org/elasticsearch/cluster/metadata/MetaDataIndexTemplateServiceTests.java
Co-Authored-By: Lee Hinman <dakrone@users.noreply.github.com>
* Update server/src/main/java/org/elasticsearch/cluster/metadata/MetaDataIndexTemplateService.java
Co-Authored-By: Lee Hinman <dakrone@users.noreply.github.com>
Co-authored-by: Lee Hinman <dakrone@users.noreply.github.com>
* Adjusted to 7.7
* unused import fixed
* npe fixeD
* change exception type
Co-authored-by: Lee Hinman <dakrone@users.noreply.github.com>
This commit ensures that we don't use the non-deterministic canReturnNullResponseIfMatchNoDocs
boolean in the cache key of the ShardSearchRequest. The value of this boolean has no influence
on the cacheability of the request.
Closes#32827
Today we log `failed to execute pipeline for a bulk request` at `ERROR` level
if an attempt to run an ingest pipeline fails. A failure here is commonly due
to an `EsRejectedExecutionException`. We also feed such failures back to the
client and record the rejection in the threadpool statistics.
In line with #51459 there is no need to log failures within actions so noisily
and with such urgency. It is better to leave it up to the client to react
accordingly. Typically an `EsRejectedExecutionException` should result in the
client backing off and retrying, so a failure here is not normally fatal enough
to justify an `ERROR` log at all.
This commit reduces the log level for this message to `DEBUG`.
Fixes an issue where the elasticsearch-node command-line tools would not work correctly
because PersistentTasksCustomMetaData contains named XContent from plugins. This PR
makes it so that the parsing for all custom metadata is skipped, even if the core system would
know how to handle it.
Closes#53549
This removes some more ceremony when declaring agg parsers. You no
longer need a static `parse` method, instead you can just make the
`PARSER` public in most cases.
There are still a few aggs with the `parse` method, but those `parse`
methods are a little more complex to untangle.
Currently the remote info api has added a number of possible fields
(proxy, num_socket_connections, etc) that are available in proxy mode.
These fields are not aligned with what the settings are named. This
commit modifies this API to align with the settings.
Wildcard queries on keyword fields get normalized, however this normalization
step should exclude the two special characters * and ? in order to keep the
wildcard query itself intact.
Closes#46300
The snapshot stats response list of snapshot statuses is not ordered according to the
given list of snapshot names so randomly we could mix up snapshot1 and snapshot2
when asserting on the stats.
Fixed by getting each snapshot's stats individually.
Closes#54034
This commit changes the pre_filter_shard_size default from 128 to unspecified.
This allows to apply heuristics based on the request and the target indices when deciding
whether the can match phase should run or not. When unspecified, this pr runs the can match phase
automatically if one of these conditions is met:
* The request targets more than 128 shards.
* The request contains read-only indices.
* The primary sort of the query targets an indexed field.
Users can opt-out from this behavior by setting the `pre_filter_shard_size` to a static value.
Closes#39835
I created this bug today in #53793. When a `DelayableWriteable` that
references an existing object serializes itself it wasn't taking the
version of the node on the other side of the wire into account. This
fixes that.
Today when cluster.remote.connect is set to false, and some aspect of
the codebase tries to get a remote client, today we return a no such
remote cluster exception. This can be quite perplexing to users,
especially if the remote cluster is actually defined in their cluster
state, it is only that the local node is not a remote cluter
client. This commit addresses this by providing a dedicated error
message when a remote cluster is not available because the local node is
not a remote cluster client.
This commit removes the configuration time vs execution time distinction
with regards to certain BuildParms properties. Because of the cost of
determining Java versions for configuration JDK locations we deferred
this until execution time. This had two main downsides. First, we had
to implement all this build logic in tasks, which required a bunch of
additional plumbing and complexity. Second, because some information
wasn't known during configuration time, we had to nest any build logic
that depended on this in awkward callbacks.
We now defer to the JavaInstallationRegistry recently added in Gradle.
This utility uses a much more efficient method for probing Java
installations vs our jrunscript implementation. This, combined with some
optimizations to avoid probing the current JVM as well as deferring
some evaluation via Providers when probing installations for BWC builds
we can maintain effectively the same configuration time performance
while removing a bunch of complexity and runtime cost (snapshotting
inputs for the GenerateGlobalBuildInfoTask was very expensive). The end
result should be a much more responsive build execution in almost all
scenarios.
(cherry picked from commit ecdbd37f2e0f0447ed574b306adb64c19adc3ce1)
This moves the pipeline aggregation validation from the data node to the
coordinating node so that we, eventually, can stop sending pipeline
aggregations to the data nodes entirely. In fact, it moves it into the
"request validation" stage so multiple errors can be accumulated and
sent back to the requester for the entire request. We can't always take
advantage of that, but it'll be nice for folks not to have to play
whack-a-mole with validation.
This is implemented by replacing `PipelineAggretionBuilder#validate`
with:
```
protected abstract void validate(ValidationContext context);
```
The `ValidationContext` handles the accumulation of validation failures,
provides access to the aggregation's siblings, and implements a few
validation utility methods.
If a setting is touched during bootstrap before logging is configured,
and that setting uses a byte size value, the deprecation logger for
ByteSizeValue will be initialized. However, this means a logger will be
configured before log4j is initialized, which we reject at startup. This
commit puts this deprecation logger in a holder pattern so that it is
not initialized until first use, which will happen after logging is
configured.
Benchmarking showed that the effect of the ExitableDirectoryReader
is reduced considerably when checking every 8191 docs. Moreover,
set the cancellable task before calling QueryPhase#preProcess()
and make sure we don't wrap with an ExitableDirectoryReader at all
when lowLevelCancellation is set to false to avoid completely any
performance impact.
Follows: #52822
Follows: #53166
Follows: #53496
(cherry picked from commit cdc377e8e74d3ca6c231c36dc5e80621aab47c69)
* Get Async Search: omit _clusters section when empty (#53907)
The _clusters section is omitted by the search API whenever no remote clusters are searched. Async search should do the same, but Get Async Search returns a deserialized response, hence a weird `_clusters` section with all values set to `0` gets returned instead. In fact the recreated Clusters object is not the same object as the EMPTY constant, yet it has the same content.
This commit addresses this by changing the comparison in the `toXContent` method to not print out the section if the number of total clusters is `0`.
* Async search: remove version from response (#53960)
The goal of the version field was to quickly show when you can expect to find something new in the search response, compared to when nothing has changed. This can also be done by looking at the `_shards` section and `num_reduce_phases` returned with the search response. In fact when there has been one or more additional reduction of the results, you can expect new results in the search response. Otherwise, the `_shards` section could notify of additional failures of shards that have completed the query, but that is not a guarantee that their results will be exposed (only when the following partial reduction is performed their results will be available).
That said this commit clarifies this in the docs and removes the version field from the async search response
* Async Search: replicas to auto expand from 0 to 1 (#53964)
This way single node clusters that are green don't go yellow once async search is used, while
all the others still have one replica.
* [DOCS] address timing issue in async search docs tests (#53910)
The docs snippets for submit async search have proven difficult to test as it is not possible to guarantee that you get a response that is not final, even when providing `wait_for_completion=0`. In the docs we want to show though a proper long-running query, and its first response should be partial rather than final.
With this commit we adapt the docs snippets to show a partial response, and replace under the hood all that's needed to make the snippets tests succeed when we get a final response. Also, increased the timeout so we always get a final response.
Closes#53887Closes#53891
Use sequence numbers and force merge UUID to determine whether a shard has changed or not instead before falling back to comparing files to get incremental snapshots on primary fail-over.
The test in CloseWhileRelocatingShardsIT failed recently
multiple times (3) when waiting for initial indices to be
become green. Looking at the execution logs from #53544
it appears at the very beginning of the test and when
the WindowsFS file system is picked up (which is known
to slow down tests).
This commit simply increases the timeout for the first
ensureGreen() to 60 seconds. If the test continues to fail,
we might want to test a larger timeout or disable
WindowsFS for this test.
Closes#53544
This commits adds a data stream feature flag, initial definition of a data stream and
the stubs for the data stream create, delete and get APIs. Also simple serialization
tests are added and a rest test to thest the data stream API stubs.
This is a large amount of code and mainly mechanical, but this commit should be
straightforward to review, because there isn't any real logic.
The data stream transport and rest action are behind the data stream feature flag and
are only intialized if the feature flag is enabled. The feature flag is enabled if
elasticsearch is build as snapshot or a release build and the
'es.datastreams_feature_flag_registered' is enabled.
The integ-test-zip sets the feature flag if building a release build, otherwise
rest tests would fail.
Relates to #53100
Today we only read `cluster.max_voting_config_exclusions` from the dynamic
settings in the cluster metadata, ignoring any value set in
`elasticsearch.yml`. This commit addresses this.
Closes#53455
When indexing a rectangle that crosses the dateline, we are currently not
handling it properly and we index a polygon that do not cross the dateline.
This changes generates two polygons wrapping the dateline.
* Adds ability for contexts to specify their own defaults.
* Context defaults are applied if no context-specific or
general setting exists.
* See 070ea7e for settings keys.
* Increases the per-context default for the `ingest` context.
* Cache size is doubled, 200 compared to default of 100
* Cache expiration is unchanged at no expiration
* Cache max compilation is quintupled, 375/5m instead of 75/5m
Backport of: 1b37d4b
Refs: #50152
This commit changes the Transforms notifications index to be hidden
index, with a hidden alias.
This commit also removes the temporary hack in
MetaDataCreateIndexService that prevents deprecation warnings for known
dot-prefixed index names which are not hidden/system indices, as this
was the last index pattern to need that hack.
Jason Tedor
Nik Everett
Martijn van Groningen
Bogdan Pintea
jimczi
Armin Braun
Tanguy Leroux
Henning Andersen
Przemko Robakowski
Tim Brooks
David Turner
markharwood
Yannick Welsch
Christoph Büscher
Alan Woodward
Dan Hermann
muachilin
Mark Vieira
Marios Trivyzas
Luca Cavanna
Ryan Ernst
Ignacio Vera
Stuart Tettemer
Gordon Brown
Lee Hinman