provided in the search
Currently, doing a field lookup within a terms agg will restrict the
fields available to those within the types passed into the search
request. However, when doing sub aggs within a children agg, the
fields available should not be restricted to those of the search.
This change makes the field lookup use the index level mapper service.
The optimization we do in the HandlesStreamInput / Output
adds a lot of complexity with a rather unknown benefit. It tries
to compress commonly used strings and write ids instead. This
should rather be done on a lower level if at all necessary for
the small message we send over the network.
Today we have a dirty flag indicating that a refresh must
be executed. We also allow users to bypass this by setting
a force=true boolean on the refresh request / command. All
these flags are unneeded since the SearcherManager has all
the information to do the right thing if it's dirty or not.
BytesStreamOutput allows to pass the expected size but by default uses
BigArrays.PAGE_SIZE_IN_BYTES which is 16k. A common cached result ie.
a date histogram with 3 buckets is ~100byte so 16k might be very wasteful
since we don't shrink to the actual size once we are done serializing.
By passing 512 as the expected size we will resize the byte array in the stream
slowly until we hit the page size and don't waste too much memory for small query
results.
This pr removes the optimization for auto generated ids.
Previously, when ids were auto generated by elasticsearch then there was no
check to see if a document with same id already existed and instead the new
document was only appended. However, due to lucene improvements this
optimization does not add much value. In addition, under rare circumstances it might
cause duplicate documents:
When an indexing request is retried (due to connect lost, node closed etc),
then a flag 'canHaveDuplicates' is set to true for the indexing request
that is send a second time. This was to make sure that even
when an indexing request for a document with autogenerated id comes in
we do not have to update unless this flag is set and instead only append.
However, it might happen that for a retry or for the replication the
indexing request that has the canHaveDuplicates set to true (the retried request) arrives
at the destination before the original request that does have it set false.
In this case both request add a document and we have a duplicated a document.
This commit adds a workaround: remove the optimization for auto
generated ids and always update the document.
The asumtion is that this will not slow down indexing more than 10 percent,
see: http://benchmarks.elasticsearch.org/closes#8788closes#9468
today we use the length of the BytesReference which is misleading since
the reference is paged such that the length != ramBytesUsed. This can lead
to a way higher memory consuption than expected if query results are tiny
since each query result requires at least 16kb. Yet, we should rethink this
strategy for query results that are very small ie. less than 20% of the ramBytesUsed
but this commit first tries to make the acocunting correct.
Additionally, this setting can be specified in elasticsearch.yml if
desired, to pre-populate the list of methods to be added to the default
blacklist.
When making a change to this setting dynamically, the entire blacklist
is logged as well.
The `analyzer` setting is now the base setting, and `search_analyzer`
is simply an override of the search time analyzer. When setting
`search_analyzer`, `analyzer` must be set.
closes#9371
Using the `script.groovy.sandbox.method_blacklist_patch` setting, the
blacklist can be dynamically *added* to by specifying a comma-separated
list of methods (for example, "toString,size" would add .toString and
.size to the blacklist).
When the `script.groovy.sandbox.method_blacklist_patch` setting is
changed, the script cache is cleared to force new scripts to be
recompiled. Additionally the on-disk cache is cleared so that scripts in
the `config/scripts` directory are re-compiled as well.
This also fixes an issue where script engines were injected more than
once, which can cause multiple instances of the script engine per node.
Extended_stats now displays the upper and lower bounds on standard deviations (e.g. avg +/- std).
Default is to show 2 std above/below, but can be changed using the `sigma` parameter.
Accepts non-negative doubles
Closes#9356
This change makes InternalHistogram the only InternalAggregation used by the Histogram Aggregator. There is still a separate Bucket implementation and Factory implementation. All buckets are created through the factory passed into the InternalHistogram meaning and the correct factory implementation is serialised as part of the aggregation to make sure the correct bucket types are always generate.
This is needed by the Transformers (namely the derivative transformer) to allow it to generate buckets of the right type without having to know what the underlying bucket implementation is.
To properly replicate, we currently stop flushing during recovery so we can repay the translog once copying files are done. Once recovery is done, the translog will be flushed by a background thread that, by default, kicks in every 5s. In case of a recovery failure and a quick re-assignment of a new shard copy, we may fail to flush before starting a new recovery, causing it to deal with potentially even longer translog. This commit makes sure we flush immediately when the ongoing recovery count goes to 0.
I also added a simple recovery benchmark.
Closes#9439
If an index is deleted during initial state of the snapshot operation, the entire snapshot can fail with NPE. This commit improves handling of this situation and allows snapshot to continue if partial snapshots are allowed.
Closes#9024
PR #8672 addresses ambiguous polygons - those that either cross the dateline or span the map - by complying with the OGC standard right-hand rule. Since ```GeoPolygonFilter``` is self contained logic, the fix in #8672 did not address the issue for the ```GeoPolygonFilter```. This was identified in issue #5968
This fixes the ambiguous polygon issue in ```GeoPolygonFilter``` by moving the dateline crossing code from ```ShapeBuilder``` to ```GeoUtils``` and reusing the logic inside the ```pointInPolygon``` method. Unit tests are added to ensure support for coordinates specified in either standard lat/lon or great-circle coordinate systems.
closes#5968closes#9304
The InternalClusterInfoService reaches out to the nodes to get information about their disk usage and shard store size. Upon a node level error we currently remove the node info from the local cache. We should also clear the cache when we run into an error on the action level (excluding any info from all nodes).
This also adds settings for the timeout used when waiting for nodes.
Closes#9449
When we renamed all of the transport actions in #7105, shard started and failed were flipped around by mistake. This commit fixes their naming.
Closes#9440
This change makes the response API object for Histogram Aggregations the same for all types of Histogram, and does the same for all types of Ranges.
The change removes getBucketByKey() from all aggregations except filters and terms. It also reduces the methods on the Bucket class to just getKey() and getKeyAsString().
The getKey() method returns Object and the actual Type is returns will be appropriate for the type of aggregation being run. e.g. date_histogram will return a DateTime for this method and Histogram will return a Number.
Apparently some filesystems such as ZFS and occasionally NTFS can report
filesystem usages that are negative, or above the maximum total size of
the filesystem. This relaxes the constraints on `DiskUsage` so that an
exception is not thrown.
If 0 is passed as the totalBytes, `.getFreeDiskAsPercentage()` will
always return 100.0% free (to ensure the disk threshold decider fails
open)
Fixes#9249
Relates to #9260
This bug was introduced by #8454 which allowed the childFilter to only be consumed once. By adding the child docid buffering multiple buckets can now be emitted by the same doc id. This child docid buffering only happens in the scope of the current root document, so the amount of child doc ids buffered is small.
Closes#9317Closes#9346
The fix is the move the parent filter resolving from the nextReader(...) method to the collect(...) method, because only then any parent nested filter's parent filter is then properly instantiated.
Closes#9280Closes#9335
We want to check if at least the primaries succeeded if we do not
wait for green and not if all succeeded if we wait for green.
That was a misconception in c617af37e8
J Charitopoulos
Glen Smith
Ryan Ernst
David Pilato
Simon Willnauer
Britta Weber
Oliver
Lee Hinman
Zachary Tong
gmarz
Nicholas Knize
Clinton Gormley
Colin Goodheart-Smithe
Boaz Leskes
Igor Motov
simaov
Martijn van Groningen
javanna
Sourav Mitra
Christian Verkerk
Aske Hansen