Guava was removed from Elasticsearch many years ago, but remnants of it
remain due to transitive dependencies. When a dependency pulls guava
into the compile classpath, devs can inadvertently begin using methods
from guava without realizing it. This commit moves guava to a runtime
dependency in the modules that it is needed.
Note that one special case is the html sanitizer in watcher. The third
party dep uses guava in the PolicyFactory class signature. However, only
calling a method on the PolicyFactory actually causes the class to be
loaded, a reference alone does not trigger compilation to look at the
class implementation. There we utilize a MethodHandle for invoking the
relevant method at runtime, where guava will continue to exist.
Change how we format exceptions to only wrap them as necessary. While
the config's overall philosophy is to put items one-per-line when
wrapping, in practice this is a little cumbersome for exception lists.
When installing plugins from remote sources, either the Elastic download
service, or maven, a checksum file is downloaded and checked against the
downloaded zip. The current format for official plugins is to use a
sha512 checksum which includes the zip filename. This format matches
that from sha512sum, and allows using the --check argument there to
verify the checksum manually. However, when generating checksum files
with maven and gradle, the filename is not included.
This commit relaxes the requirement the filename existing within the
sha512 checksum file for maven plugins. We continue to strictly enforce
official plugins have the existing format of the file.
closes#52413
Now that the FIPS 140 security provider is simply a test dependency
we don't need the thirdPartyAudit exceptions, but plugin-cli and
transport-netty4 do need jarHell disabled as they use the non fips
BouncyCastle security provider as a test dependency too.
When installing multiple plugins at once, this commit changes the
behavior to report installed plugins as we go. In the case of failure,
we emit a message that we are rolling back any plugins that were
installed successfully, and also that they were successfully rolled
back. In the case a plugin is not successfully rolled back, we report
this clearly too, alerting the user that there might still be state on
disk they would have to clean up.
This commit allows the plugin installer to install multiple plugins in a
single invocation. The installation will be treated as a transaction, so
that all of the plugins are install successfully, or none of the plugins
are installed.
This fixes a regression introduced in #42042. The logic here was
mistakenly inverted such that we only run these tests in a FIPS JVM
which is the opposite of what we intend.
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
This commit introduces a consistent, and type-safe manner for handling
global build parameters through out our build logic. Primarily this
replaces the existing usages of extra properties with static accessors.
It also introduces and explicit API for initialization and mutation of
any such parameters, as well as better error handling for uninitialized
or eager access of parameter values.
Closes#42042
This is the Java side of https://github.com/elastic/ml-cpp/pull/593
with a fallback so that ml-cpp bundles with either the
new or old directory structure work for the time being.
A few days after merging the C++ changes a followup to
this change will be made that removes the fallback.
Most of our CLI tools use the Terminal class, which previously did not provide methods for writing to standard output. When all output goes to standard out, there are two basic problems. First, errors and warnings are "swallowed" in pipelines, making it hard for a user to know when something's gone wrong. Second, errors and warnings are intermingled with legitimate output, making it difficult to pass the results of interactive scripts to other tools.
This commit adds a second set of print commands to Terminal for printing to standard error, with errorPrint corresponding to print and errorPrintln corresponding to println. This leaves it to developers to decide which output should go where. It also adjusts existing commands to send errors and warnings to stderr.
Usage is printed to standard output when it's correctly requested (e.g., bin/elasticsearch-keystore --help) but goes to standard error when a command is invoked incorrectly (e.g. bin/elasticsearch-keystore list-with-a-typo | sort).
This commit applies a normalization process to environment paths, both
in how they are stored internally, also their settings values. This
normalization is done via two means:
- we make the paths absolute
- we remove redundant name elements from the path (what Java calls
"normalization")
This change ensures that when we compare and refer to these paths within
the system, we are using a common ground. For example, prior to the
change if the data path was relative, we would not compare it correctly
to paths from disk usage. This is because the paths in disk usage were
being made absolute.
Today when checksumming a plugin zip during plugin install, we read all
of the bytes of the zip into memory at once. When trying to run the
plugin installer on a small heap (say, 64 MiB), this can lead to the
plugin installer running out of memory when checksumming large
plugins. This commit addresses this by reading the plugin bytes in 8 KiB
chunks, thus using a constant amount of memory independent of the size
of the plugin.
This change makes the process of verifying the signature of
official plugins FIPS 140 compliant by defaulting to use the
BouncyCastle FIPS provider and adding a dependency to bcpg-fips
that implement parts of openPGP in a FIPS compliant manner.
In already FIPS 140 enabled environments that use the
BouncyCastle FIPS provider, the bcfips dependency is redundant
but doesn't cause an issue as it will be added only in the classpath
of the cli-tools
This is a backport of #44224
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
We added some special handling for installing and removing the
ingest-geoip and ingest-user-agent plugins when we converted them to
modules. This special handling was done to minimize breaking users in a
minor release. However, do not want to maintain this behavior forever so
this commit removes that special handling in the master branch so that
starting with 7.0.0 this special handling will be gone.
* Don't print download progress in batch mode
With this change we will no longer provide the progress bar in batch
mode.
Assuming that this is mode is mainly for consumption by tools which
will serialize the output, we shouldn't print a progress bar to be
for every percentile.
* PR review
The list of official plugins accidentally included `qa` projects like,
well, `qa` and `amazon-ec2`. This changes the mechanism that we use to
build the list and adds a test to catch this.
Closes#35623
With this change, `Version` no longer carries information about the qualifier,
we still need a way to show the "display version" that does have both
qualifier and snapshot. This is now stored by the build and red from `META-INF`.
The main benefit of the upgrade for users is the search optimization for top scored documents when the total hit count is not needed. However this optimization is not activated in this change, there is another issue opened to discuss how it should be integrated smoothly.
Some comments about the change:
* Tests that can produce negative scores have been adapted but we need to forbid them completely: #33309Closes#32899
- third party audit detects jar hell with JDK so we disable it
- jdk non portable in forbiddenapis detects classes being used from the
JDK ( for fips ) that are not portable, this is intended so we don't
scan for it on fips.
- different exclusion rules for third party audit on fips
Closes#33179
Ensure our tests can run in a FIPS JVM
JKS keystores cannot be used in a FIPS JVM as attempting to use one
in order to init a KeyManagerFactory or a TrustManagerFactory is not
allowed.( JKS keystore algorithms for private key encryption are not
FIPS 140 approved)
This commit replaces JKS keystores in our tests with the
corresponding PEM encoded key and certificates both for key and trust
configurations.
Whenever it's not possible to refactor the test, i.e. when we are
testing that we can load a JKS keystore, etc. we attempt to
mute the test when we are running in FIPS 140 JVM. Testing for the
JVM is naive and is based on the name of the security provider as
we would control the testing infrastrtucture and so this would be
reliable enough.
Other cases of tests being muted are the ones that involve custom
TrustStoreManagers or KeyStoreManagers, null TLS Ciphers and the
SAMLAuthneticator class as we cannot sign XML documents in the
way we were doing. SAMLAuthenticator tests in a FIPS JVM can be
reenabled with precomputed and signed SAML messages at a later stage.
IT will be covered in a subsequent PR
This was silly; Bouncy Castle has an armored input stream for reading
keys in ASCII armor format. This means that we do not need to strip the
header ourselves and base64 decode the key. This had problems anyway
because of discrepancies in the padding that Bouncy Castle would produce
and the JDK base64 decoder was expecting. Now that we armor input/output
the whole way during tests, we fix all random failures in test cases
too.
A previous commit added the public key used for signing artifacts to the
plugin CLI. This commit is an iteration on that to add the header and
footer to the key so that it is clear what the key is. Instead, we strip
the header/footer on read. With this change we simplify our test where
keys already in this format are generated and we had to strip on the
test side.
We sign our official plugins yet this is not well-advertised and not at
all consumed during plugin installation. For plugins that are installed
over the intertubes, verifying that the downloaded artifact is signed by
our signing key would establish both integrity and validity of the
downloaded artifact. The chain of trust here is simple: our installable
artifacts (archive and package distributions) so that if a user trusts
our packages via their signatures, and our plugin installer (which would
be executing trusted code) verifies the downloaded plugin, then the user
can trust the downloaded plugin too. This commit adds verification of
official plugins downloaded during installation. We do not add
verification for offline plugin installs; a user can download our
signatures and verify the artifacts themselves.
This commit also needs to solve a few interesting challenges. One of
these is that we want the bouncy castle JARs on the classpath only for
the plugin installer, but not for the runtime
Elasticsearch. Additionally, we want these JARs to not be present for
the JAR hell checks. To address this, we shift these JARs into a
sub-directory of lib (lib/tools/plugin-cli) that is only loaded for the
plugin installer, and in the plugin installer we filter any JARs in this
directory from the JAR hell check.
We post snapshot builds to snapshots.elastic.co yet the official plugin
installer will not let you install such plugins without manually
downloading them and installing them from a file URL. This commit adds
the ability for the plugin installer to use snapshots.elastic.co for
installing official plugins if a es.plugins.staging is set and the
current build is also a snapshot build. Otherwise, we continue to use
staging.elastic.co if the current build is a release build and
es.plugins.staging is set and, of course, use the release artifacts at
artifacts.elastic.co for release builds with es.plugins.staging unset.
Meta plugins existed only for a short time, in order to enable breaking
up x-pack into multiple plugins. However, now that x-pack is no longer
installed as a plugin, the need for them has disappeared. This commit
removes the meta plugins infrastructure.
X-Pack can no longer be installed as a plugin. This commit adds special
handling for when a user attempts to install X-Pack. This special
handling informs the user of the oss distribution that they should
download the default distribution and the user of the default
distribution that X-Pack does not require installation as it is included
by default.
This commit adds the distribution flavor (default versus oss) to the
build process which is passed through the startup scripts to
Elasticsearch. This change will be used to customize the message on
attempting to install/remove x-pack based on the distribution flavor.
This commit makes x-pack a module and adds it to the default
distrubtion. It also creates distributions for zip, tar, deb and rpm
which contain only oss code.
This commit fixes plugin warning confirmation to include native
controller confirmation when no security policy exists. The case was
already covered for meta plugins, but not for normal plugins. Tests are
also added for all cases.
Today we have a silent batch mode in the install plugin command when
standard input is closed or there is no tty. It appears that
historically this was useful when running tests where we want to accept
plugin permissions without having to acknowledge them. Now that we have
an explicit batch mode flag, this use-case is removed. The motivation
for removing this now is that there is another place where silent batch
mode arises and that is when a user attempts to install a plugin inside
a Docker container without keeping standard input open and attaching a
tty. In this case, the install plugin command will treat the situation
as a silent batch mode and therefore the user will never have the chance
to acknowledge the additional permissions required by a plugin. This
commit removes this silent batch mode in favor of using the --batch flag
when running tests and requiring the user to take explicit action to
acknowledge the additional permissions (either by leaving standard input
open and attaching a tty, or by passing the --batch flags themselves).
Note that with this change the user will now see a null pointer
exception when they try to install a plugin in a Docker container
without keeping standard input open and attaching a tty. This will be
addressed in an immediate follow-up, but because the implications of
that change are larger, they should be handled separately from this one.
Provide more actionable error message when installing an offline plugin
in the plugins directory, and the `plugins` directory for the node
contains plugin distribution.
Closes#27401
As we have factored Elasticsearch into smaller libraries, we have ended
up in a situation that some of the dependencies of Elasticsearch are not
available to code that depends on these smaller libraries but not server
Elasticsearch. This is a good thing, this was one of the goals of
separating Elasticsearch into smaller libraries, to shed some of the
dependencies from other components of the system. However, this now
means that simple utility methods from Lucene that we rely on are no
longer available everywhere. This commit copies IOUtils (with some small
formatting changes for our codebase) into the fold so that other
components of the system can rely on these methods where they no longer
depend on Lucene.
This commit removes the ability to specify that a plugin requires the
keystore and instead creates the keystore on package installation or
when Elasticsearch is started for the first time. The reason that we opt
to create the keystore on package installation is to ensure that the
keystore has the correct permissions (the package installation scripts
run as root as opposed to Elasticsearch running as the elasticsearch
user) and to enable removing the keystore on package removal if the
keystore is not modified.
This commit moves the semantic validation (like which version a plugin
was built for or which java version it is compatible with) from reading
a plugin descriptor, leaving the checks on the format of the descriptor
intact.
relates #28540
Ryan Ernst
Rory Hunter
Ioannis Kakavas
Jason Tedor
Mark Vieira
David Roberts
William Brafford
Alpar Torok
Nik Everett
Jim Ferenczi
Ioannis Kakavas
Tanguy Leroux
Hendrik Muhs
Ryan Ernst
Mayya Sharipova