Today when processing an operation on a replica engine (or the
following engine), we first add it to Lucene, then add it to translog,
then finally marks its seq_no as completed. If a flush occurs after step1,
but before step-3, the max_seq_no in the commit's user_data will be
smaller than the seq_no of some documents in the Lucene commit.
This test failed on 7.1 when running full cluster restart tests against pre-7.0
clusters (e.g. 6.6 clusters). The fixes the expected type in the
templates after the cluster restart.
Backport of #38903
When tearing down from `ESSingleNodeTestCase` we perform a delete on "*"
indices, it some cases, however, those indices are not fully deleted. Rather
than have a failure occur later down the change (see:
https://github.com/elastic/elasticsearch/issues/30290#issuecomment-463589008 )
the failure should occurr immediately so it can be diagnosed more easily.
Instead of using `WarningsHandler.PERMISSIVE`, we only match warnings
that are due to types removal.
This PR also renames `allowTypeRemovalWarnings` to `allowTypesRemovalWarnings`.
Relates to #37920.
There were two documents (seq=2 and seq=103) missing on the follower in
one of the failures of `testFailOverOnFollower`. I spent several hours
on that failure but could not figure out the reason. I adjust log and
unmute this test so we can collect more information.
Relates #38633
Adds the ability to fetch chunks from different files in parallel, configurable using the new `ccr.indices.recovery.max_concurrent_file_chunks` setting, which defaults to 5 in this PR.
The implementation uses the parallel file writer functionality that is also used by peer recoveries.
When we are preparing to release a major version the rules around
"unreleased" versions and branches get a bit more complex.
This change implements the following rules:
- If the tip version on the previous major is a .0 (e.g. 6.7.0) then
the tip of the minor before that (e.g. 6.6.1) must be unreleased.
(This is because 6.7.0 would be "staged" in preparation for release,
but 6.6.1 would be open for bug fixes on the release 6.6.x line)
(in VersionCollection & VersionUtils)
- The "major.x" branch (if it exists) will always point to the latest
minor in that series. Anything that is not the latest minor, must
therefore be on a the "major.minor" branch
For example, if v7.1.0 exists then the "7.x" branch must be 7.1.0,
and 7.0.0 must be on the "7.0" branch
(in VersionCollection)
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
In #38333 and #38350 we moved away from the `discovery.zen` settings namespace
since these settings have an effect even though Zen Discovery itself is being
phased out. This change aligns the documentation and the names of related
classes and methods with the newly-introduced naming conventions.
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.
The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).
Given all these issues, it seems that this custom timeout mechanism
gives little benefits while causing a lot of harm. We should rather rely
on connect and socket timeout exposed by the underlying http client
and accept that a request can overall take longer than the configured
timeout, which is the case even with a single retry anyways.
This commit removes the `maxRetryTimeout` setting and all of its usages.
Currently the snapshot/restore process manually sets the global
checkpoint to the max sequence number from the restored segements. This
does not work for Ccr as this will lead to documents that would be
recovered in the normal followering operation from being recovered.
This commit fixes this issue by setting the initial global checkpoint to
the existing local checkpoint.
With this change we no longer support pluggable discovery implementations. No
known implementations of `DiscoveryPlugin` actually override this method, so in
practice this should have no effect on the wider world. However, we were using
this rather extensively in tests to provide the `test-zen` discovery type. We
no longer need a separate discovery type for tests as we no longer need to
customise its behaviour.
Relates #38410
Today we throw a fatal `RuntimeException` if an exception occurs in
`getMasterName()`, and this includes the case where there is currently no
master. However, sometimes we call this method inside an `assertBusy()` in
order to allow for a cluster that is in the process of stabilising and electing
a master. The trouble is that `assertBusy()` only retries on an
`AssertionError` and not on a general `RuntimeException`, so the lack of a
master is immediately fatal.
This commit fixes the issue by asserting there is a master, triggering a retry
if there is not.
Fixes#38331
Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
X-Pack security supports built-in authentication service
`token-service` that allows access tokens to be used to
access Elasticsearch without using Basic authentication.
The tokens are generated by `token-service` based on
OAuth2 spec. The access token is a short-lived token
(defaults to 20m) and refresh token with a lifetime of 24 hours,
making them unsuitable for long-lived or recurring tasks where
the system might go offline thereby failing refresh of tokens.
This commit introduces a built-in authentication service
`api-key-service` that adds support for long-lived tokens aka API
keys to access Elasticsearch. The `api-key-service` is consulted
after `token-service` in the authentication chain. By default,
if TLS is enabled then `api-key-service` is also enabled.
The service can be disabled using the configuration setting.
The API keys:-
- by default do not have an expiration but expiration can be
configured where the API keys need to be expired after a
certain amount of time.
- when generated will keep authentication information of the user that
generated them.
- can be defined with a role describing the privileges for accessing
Elasticsearch and will be limited by the role of the user that
generated them
- can be invalidated via invalidation API
- information can be retrieved via a get API
- that have been expired or invalidated will be retained for 1 week
before being deleted. The expired API keys remover task handles this.
Following are the API key management APIs:-
1. Create API Key - `PUT/POST /_security/api_key`
2. Get API key(s) - `GET /_security/api_key`
3. Invalidate API Key(s) `DELETE /_security/api_key`
The API keys can be used to access Elasticsearch using `Authorization`
header, where the auth scheme is `ApiKey` and the credentials, is the
base64 encoding of API key Id and API key separated by a colon.
Example:-
```
curl -H "Authorization: ApiKey YXBpLWtleS1pZDphcGkta2V5" http://localhost:9200/_cluster/health
```
Closes#34383
Relax test warning message checking to pre-empt PR 38022 landing in 6.7 with new warning messages.
The relaxed test now just assumes any warning message starting with “[types removal]” is tolerated rather than the precise phrasing used in the 6.7 branch.
This commit introduces a background sync for retention leases. The idea
here is that we do a heavyweight sync when adding a new retention lease,
and then periodically we want to background sync any retention lease
renewals to the replicas. As long as the background sync interval is
significantly lower than the extended lifetime of a retention lease, it
is okay if from time to time a replica misses a sync (it will still have
an older version of the lease that is retaining more data as we assume
that renewals do not decrease the retaining sequence number). There are
two follow-ups that will come after this commit. The first is to address
the fact that we have not adapted the should periodically flush logic to
possibly flush the retention leases. We want to do something like flush
if we have not flushed in the last five minutes and there are renewed
retention leases since the last time that we flushed. An additional
follow-up will remove the syncing of retention leases when a retention
lease expires. Today this sync could be invoked in the background by a
merge operation. Rather, we will move the syncing of retention lease
expiration to be done under the background sync. The background sync
will use the heavyweight sync (write action) if a lease has expired, and
will use the lightweight background sync (replication action) otherwise.
Today the following settings in the `discovery.zen` namespace are still used:
- `discovery.zen.no_master_block`
- `discovery.zen.hosts_provider`
- `discovery.zen.ping.unicast.concurrent_connects`
- `discovery.zen.ping.unicast.hosts.resolve_timeout`
- `discovery.zen.ping.unicast.hosts`
This commit deprecates all other settings in this namespace so that they can be
removed in the next major version.
Today we have DiscoveryDisruptionIT tests for checking that discovery can still
work once the cluster has formed, even if the cluster is misconfigured and only
has a single master-eligible node in its unicast hosts list. In fact with Zen2
we can go one better: we do not need any nodes in the unicast hosts list,
because nodes also use the contents of the last-committed cluster state for
discovery. Additionally, the DiscoveryDisruptionIT tests were failing due to
the overenthusiastic fault-detection timeouts.
This commit replaces these tests with deterministic `CoordinatorTests` that
verify the same behaviour. It also removes some duplication by extracting a
test method called `testFollowerCheckerAfterMasterReelection()`
Closes#37687
Because concurrent sync requests from a primary to its replicas could be
in flight, it can be the case that an older retention leases collection
arrives and is processed on the replica after a newer retention leases
collection has arrived and been processed. Without a defense, in this
case the replica would overwrite the newer retention leases with the
older retention leases. This commit addresses this issue by introducing
a versioning scheme to retention leases. This versioning scheme is used
to resolve out-of-order processing on the replica. We persist this
version into Lucene and restore it on recovery. The encoding of
retention leases is starting to get a little ugly. We can consider
addressing this in a follow-up.
This PR removes the temporary change we made to the yml test harness in #37285
to automatically set `include_type_name` to `true` in index creation requests
if it's not already specified. This is possible now that the vast majority of
index creation requests were updated to be typeless in #37611. A few additional
tests also needed updating here.
Additionally, this PR updates the test harness to set `include_type_name` to
`false` in index creation requests when communicating with 6.x nodes. This
mirrors the logic added in #37611 to allow for typeless document write requests
in test set-up code. With this update in place, we can remove many references
to `include_type_name: false` from the yml tests.
Currently, there are a few tests that use autoMinMasterNodes=false and
hence override addExtraClusterBootstrapSettings, mostly this is 10-30
lines of codes that are copy-pasted from class to class.
This PR introduces `InternalTestCluster.setBootstrapMasterNodeIndex`
which is suitable for all classes and copy-paste could be removed.
Removing code is always a good thing!
* Fixes two broken spots:
1. Master failover while deleting a snapshot that has no shards will get stuck if the new master finds the 0-shard snapshot in `INIT` when deleting
2. Aborted shards that were never seen in `INIT` state by the `SnapshotsShardService` will not be notified as failed, leading to the snapshot staying in `ABORTED` state and never getting deleted with one or more shards stuck in `ABORTED` state
* Tried to make fixes as short as possible so we can backport to `6.x` with the least amount of risk
* Significantly extended test infrastructure to reproduce the above two issues
* Two new test runs:
1. Reproducing the effects of node disconnects/restarts in isolation
2. Reproducing the effects of disconnects/restarts in parallel with shard relocations and deletes
* Relates #32265
* Closes#32348
Implements `geotile_grid` aggregation
This patch refactors previous implementation https://github.com/elastic/elasticsearch/pull/30240
This code uses the same base classes as `geohash_grid` agg, but uses a different hashing
algorithm to allow zoom consistency. Each grid bucket is aligned to Web Mercator tiles.
When extending ESIntegTestCase are run on the same jvm, the static field in
NodeAndClusterIdConverter will throw an AlreadySet exceptions.
overriding the configuration method from Node.configureNodeAndClusterIdStateListener in the MockNode will prevent the listener registration from happening
relates #32850
Scheduler.schedule(...) would previously assume that caller handles
exception by calling get() on the returned ScheduledFuture.
schedule() now returns a ScheduledCancellable that no longer gives
access to the exception. Instead, any exception thrown out of a
scheduled Runnable is logged as a warning.
This is a continuation of #28667, #36137 and also fixes#37708.
This commit pushes the primary term into the replication tracker. This
is a precursor to using the primary term to resolving ordering problems
for retention leases. Namely, it can be that out-of-order retention
lease sync requests arrive on a replica. To resolve this, we need a
tuple of (primary term, version). For this to be, the primary term needs
to be accessible in the replication tracker. As the primary term is part
of the replication group anyway, this change conceptually makes sense.
With #37566 we have introduced the ability to merge multiple search responses into one. That makes it possible to expose a new way of executing cross-cluster search requests, that makes CCS much faster whenever there is network latency between the CCS coordinating node and the remote clusters. The coordinating node can now send a single search request to each remote cluster, which gets reduced by each one of them. from + size results are requested to each cluster, and the reduce phase in each cluster is non final (meaning that buckets are not pruned and pipeline aggs are not executed). The CCS coordinating node performs an additional, final reduction, which produces one search response out of the multiple responses received from the different clusters.
This new execution path will be activated by default for any CCS request unless a scroll is provided or inner hits are requested as part of field collapsing. The search API accepts now a new parameter called ccs_minimize_roundtrips that allows to opt-out of the default behaviour.
Relates to #32125
Today we pass `discovery.zen.minimum_master_nodes` to nodes started up in
tests, but for 7.x nodes this setting is not required as it has no effect.
This commit removes this setting so that nodes are started with more realistic
configurations, and deprecates it.
This drops the option for tests to disable strict deprecation mode in
the low level rest client in favor of configuring expected warnings on
any calls that should expect warnings. This behavior is
paranoid-by-default which is generally the right way to handle
deprecations and tests in general.
This PR attempts to remove all typed calls from our YAML REST tests. The PR adds include_type_name: false to create index requests that use a mapping and also to put mapping requests. It also removes _type from index requests where they haven't already been removed. The PR ignores tests named *_with_types.yml since this are specifically testing typed API behaviour.
The change also includes changing the test harness to add the type _doc to index, update, get and bulk requests that do not specify the document type when the test is running against a mixed 7.x/6.x cluster.
This is related to #35975. It adds a action timeout setting that allows
timeouts to be applied to the individual transport actions that are
used during a ccr recovery.
In order to support JSON log format, a custom pattern layout was used and its configuration is enclosed in ESJsonLayout. Users are free to use their own patterns, but if smooth Beats integration is needed, they should use ESJsonLayout. EvilLoggerTests are left intact to make sure user's custom log patterns work fine.
To populate additional fields node.id and cluster.uuid which are not available at start time,
a cluster state update will have to be received and the values passed to log4j pattern converter.
A ClusterStateObserver.Listener is used to receive only one ClusteStateUpdate. Once update is received the nodeId and clusterUUid are set in a static field in a NodeAndClusterIdConverter.
Following fields are expected in JSON log lines: type, tiemstamp, level, component, cluster.name, node.name, node.id, cluster.uuid, message, stacktrace
see ESJsonLayout.java for more details and field descriptions
Docker log4j2 configuration is now almost the same as the one use for ES binary.
The only difference is that docker is using console appenders, whereas ES is using file appenders.
relates: #32850
This commit introduces retention lease syncing from the primary to its
replicas when a new retention lease is added. A follow-up commit will
add a background sync of the retention leases as well so that renewed
retention leases are synced to replicas.
* Remove empty statements
There are a couple of instances of undocumented empty statements all across the
code base. While they are mostly harmless, they make the code hard to read and
are potentially error-prone. Removing most of these instances and marking blocks
that look empty by intention as such.
* Change test, slightly more verbose but less confusing
This commit changes the default for the `track_total_hits` option of the search request
to `10,000`. This means that by default search requests will accurately track the total hit count
up to `10,000` documents, requests that match more than this value will set the `"total.relation"`
to `"gte"` (e.g. greater than or equals) and the `"total.value"` to `10,000` in the search response.
Scroll queries are not impacted, they will continue to count the total hits accurately.
The default is set back to `true` (accurate hit count) if `rest_total_hits_as_int` is set in the search request.
I choose `10,000` as the default because that's also the number we use to limit pagination. This means that users will be able to know how far they can jump (up to 10,000) even if the total number of hits is not accurate.
Closes#33028
From #29453 and #37285, the include_type_name parameter was already present and defaulted to false. This PR makes the following updates:
* Add deprecation warnings to RestCreateIndexAction, plus tests in RestCreateIndexActionTests.
* Add a typeless 'create index' method to the Java HLRC, and deprecate the old typed version. To do this cleanly, I created new CreateIndexRequest and CreateIndexResponse objects that differ from the existing server ones.
elasticsearch-node tool helps to restore cluster if half or more of
master eligible nodes are lost. Of course, all bets are off, regarding
data consistency.
There are two parts of the tool: unsafe-bootstrap to be used when there
is still at least one master-eligible node alive and detach-cluster,
when there are no master-eligible nodes left.
This commit implements the first part.
Docs for the tool will be added separately as a part of #37812.
This change split out all the specific GeoHash
classes for the geohash_grid aggregation into
abstract GeoGrid classes that can be re-used for
specific hashing types, like `geohash`
* Testing conventions now checks for tests in main
This is the last outstanding feature of the old NamingConventionsTask,
so time to remove it.
* PR review
The assertion `assertOpsOnPrimary` does not store seq_no and primary
term of successful deletes to the `lastOpSeqNo` and `lastOpTerm`. This
leads to failures of the subsequence CAS deletes or indexes with seq_no
and term. Moreover, this assertion trips a translog assertion because it
bumps the primary term of some operations but not the primary term of
the engine.
Relates #36467Closes#37684
Exceptions thrown by the cluster applier service's settings and cluster appliers are bubbled up, and
block the state from being applied instead of silently being ignored. In combination with the cluster
state publishing lag detector, this will throw a node out of the cluster that can't properly apply
cluster state updates.
This commit moves the aggregation and mapping code from joda time to
java time. This includes field mappers, root object mappers, aggregations with date
histograms, query builders and a lot of changes within tests.
The cut-over to java time is a requirement so that we can support nanoseconds
properly in a future field mapper.
Relates #27330
Users may require the sequence number and primary terms to perform optimistic concurrency control operations. Currently, you can get the sequence number via the `docvalues_fields` API but the primary term is not accessible because it is maintained by the `SeqNoFieldMapper` and the infrastructure can't find it.
This commit adds a dedicated sub fetch phase to return both numbers that is connected to a new `seq_no_primary_term` parameter.
* Fail start of non-data node if node has data
Check that nodes started with node.data=false cannot start if they have
shard data to avoid (old) indexes being resurrected into the cluster in red status.
Issue #27073
This commit introduces a NetworkMessage class. This class has two
subclasses - InboundMessage and OutboundMessage. These messages can
be serialized and deserialized independent of the transport. This allows
more granular testing. Additionally, the serialization mechanism is now
a simple Supplier. This builds the framework to eventually move the
serialization of transport messages to the network thread. This is the
one serialization component that is not currently performed on the
network thread (transport deserialization and http serialization and
deserialization are all on the network thread).
Currently we create dedicated network threads for both the http and
transport implementations. Since these these threads should never
perform blocking operations, these threads could be shared. This commit
modifies the nio-transport to have 0 http workers be default. If the
default configs are used, this will cause the http transport to be run
on the transport worker threads. The http worker setting will still exist
in case the user would like to configure dedicated workers. Additionally,
this commmit deletes dedicated acceptor threads. We have never had these
for the netty transport and they can be added back if a need is
determined in the future.
From #29453 and #37285, the `include_type_name` parameter was already present and defaulted to false. This PR makes the following updates:
- Add deprecation warnings to `RestPutMappingAction`, plus tests in `RestPutMappingActionTests`.
- Add a typeless 'put mappings' method to the Java HLRC, and deprecate the old typed version. To do this cleanly, I opted to create a new `PutMappingRequest` object that differs from the existing server one.
Some tests (e.g. testRestoreIndexWithShardsMissingInLocalGateway) were split-braining since
being switched to Zen2 because the bootstrap setting was left around when nodes got restarted
with data folders wiped.
The test in question here was starting one node (which autobootstrapped to that single node), then
another node. The first node was then shut down (after excluding it from the voting configuration),
its data folder wiped, and restarted. After restart, the node had an empty data folder yet
initial_master_nodes set to itself (i.e. same name). This made the node sometimes form a cluster of
its own, and not rejoin the existing cluster with the other node.
This commit removes some leniency from REST handling where we move to
reject all requests that have a body where the body is not used during
the course of handling the request. For example,
DELETE /index
{
"query" : {
"term" : {
"field" : "value"
}
}
}
is now rejected.
The AbstracLifecycleComponent used to extend AbstractComponent, so it had to pass settings to the constractor of its supper class.
It no longer extends the AbstractComponent so there is no need for this constructor
There is also no need for AbstracLifecycleComponent subclasses to have Settings in their constructors if they were only passing it over to super constructor.
This is part 1. which will be backported to 6.x with a migration guide/deprecation log.
part 2 will have this constructor removed in 7
relates #35560
relates #34488
This commit fixes the IndexShardTestCase.recoverReplica(IndexShard, IndexShard, boolean)
method where the startReplica parameter was not correctly propagated and the value
true always used instead.
This commit reformats some classes in the index universe with the
purpose of breaking some long method definitions and invocations into a
line per parameter. This has the advantage that for an upcoming change
to these definitions and invocations, the diff for that change will be a
single line per definition or invocation. That makes these sorts of
changes easier to read.
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
If the checking node no longer holds the shard copy, the assertion
assertSameDocIdsOnShards might fail. This is too harsh since the
assertion is to ensure the consistency between active copies.
Today file-chunks are sent sequentially one by one in peer-recovery. This is a
correct choice since the implementation is straightforward and recovery is
network bound in most of the time. However, if the connection is encrypted, we
might not be able to saturate the network pipe because encrypting/decrypting
are cpu bound rather than network-bound.
With this commit, a source node can send multiple (default to 2) file-chunks
without waiting for the acknowledgments from the target.
Below are the benchmark results for PMC and NYC_taxis.
- PMC (20.2 GB)
| Transport | Baseline | chunks=1 | chunks=2 | chunks=3 | chunks=4 |
| ----------| ---------| -------- | -------- | -------- | -------- |
| Plain | 184s | 137s | 106s | 105s | 106s |
| TLS | 346s | 294s | 176s | 153s | 117s |
| Compress | 1556s | 1407s | 1193s | 1183s | 1211s |
- NYC_Taxis (38.6GB)
| Transport | Baseline | chunks=1 | chunks=2 | chunks=3 | chunks=4 |
| ----------| ---------| ---------| ---------| ---------| -------- |
| Plain | 321s | 249s | 191s | * | * |
| TLS | 618s | 539s | 323s | 290s | 213s |
| Compress | 2622s | 2421s | 2018s | 2029s | n/a |
Relates #33844
This is related to #35975. It implements a file based restore in the
CcrRepository. The restore transfers files from the leader cluster
to the follower cluster. It does not implement any advanced resiliency
features at the moment. Any request failure will end the restore.
Today a peer-recovery may run into a deadlock if the value of
node_concurrent_recoveries is too high. This happens because the
peer-recovery is executed in a blocking fashion. This commit attempts
to make the recovery source partially non-blocking. I will make three
follow-ups to make it fully non-blocking: (1) send translog operations,
(2) primary relocation, (3) send commit files.
Relates #36195
* Fix PrimaryAllocationIT Race Condition
* Forcing a stale primary allocation on a green index was tripping the assertion that was removed
* Added a test that this case still errors out correctly
* Made the ability to wipe stopped datanode's data public on the internal test cluster and used it to ensure correct behaviour on the fixed test
* Previously it simply passed because the test finished before the index went green and would NPE when the index was green at the time of the shard store status request, that would then come up empty
* Closes#37345
This commit moves DisruptableMockTransport to use a more accurate representation of connection
management, which allows to use the full connection manager and does not require mocking out
any behavior. With this, we can implement restarting nodes in CoordinatorTests.
This commit makes the use of empty retention lease suppliers to always
be an empty list as opposed to in some cases an empty set. This commit
is solely for consistency reasons, there is no functional change here.
Adds join validation to Zen2, which prevents a node from joining a cluster when the node does not
have the right ES version or does not satisfy any other of the join validation constraints.
* Tests: Add ElasticsearchAssertions.awaitLatch method
Some tests are using assertTrue(latch.await(...)) in their code. This
leads to an assertion error without any error message. This adds a
method which has a nicer error message and can be used in tests.
* fix forbidden apis
* fix spaces
* TESTS: Real Coordinator in SnapshotServiceTests
* Introduce real coordinator in SnapshotServiceTests to be able to test network disruptions realistically
* Make adjustments to cluster applier service so that we can pass a mocked single threaded executor for tests
This commit implements a straightforward approach to retention lease
expiration. Namely, we inspect which leases are expired when obtaining
the current leases through the replication tracker. At that moment, we
clean the map that persists the retention leases in memory.
The `cluster.unsafe_initial_master_node_count` setting was introduced as a
temporary measure while the design of `cluster.initial_master_nodes` was being
finalised. This commit removes this temporary setting, replacing it with usages
of `cluster.initial_master_nodes` where appropriate.
This commit adds a unique id to cluster blocks, so that they can be uniquely
identified if needed. This is important for the Close Index API where multiple
concurrent closing requests can be executed at the same time. By adding a
UUID to the cluster block, we can generate unique "closing block" that can
later be verified on shards and then checked again from the cluster state
before closing the index. When the verification on shard is done, the closing
block is replaced by the regular INDEX_CLOSED_BLOCK instance.
If something goes wrong, calling the Open Index API will remove the block.
Related to #33888
This commit is the first in a series which will culminate with
fully-functional shard history retention leases.
Shard history retention leases are aimed at preventing shard history
consumers from having to fallback to expensive file copy operations if
shard history is not available from a certain point. These consumers
include following indices in cross-cluster replication, and local shard
recoveries. A future consumer will be the changes API.
Further, index lifecycle management requires coordinating with some of
these consumers otherwise it could remove the source before all
consumers have finished reading all operations. The notion of shard
history retention leases that we are introducing here will also be used
to address this problem.
Shard history retention leases are a property of the replication group
managed under the authority of the primary. A shard history retention
lease is a combination of an identifier, a retaining sequence number, a
timestamp indicating when the lease was acquired or renewed, and a
string indicating the source of the lease. Being leases they have a
limited lifespan that will expire if not renewed. The idea of these
leases is that all operations above the minimum of all retaining
sequence numbers will be retained during merges (which would otherwise
clear away operations that are soft deleted). These leases will be
periodically persisted to Lucene and restored during recovery, and
broadcast to replicas under certain circumstances.
This commit is merely putting the basics in place. This first commit
only introduces the concept and integrates their use with the soft
delete retention policy. We add some tests to demonstrate the basic
management is correct, and that the soft delete policy is correctly
influenced by the existence of any retention leases. We make no effort
in this commit to implement any of the following:
- timestamps
- expiration
- persistence to and recovery from Lucene
- handoff during primary relocation
- sharing retention leases with replicas
- exposing leases in shard-level statistics
- integration with cross-cluster replication
These will occur individually in follow-up commits.
The initialization of a suite scope cluster had some sideffects on
subsequent runs which causes issues when tests must be reproduced.
This moves the suite scope initialization to a privte random context.
Closes#36202
In Lucene 8 searches can skip non-competitive hits if the total hit count is not requested.
It is also possible to track the number of hits up to a certain threshold. This is a trade off to speed up searches while still being able to know a lower bound of the total hit count. This change adds the ability to set this threshold directly in the track_total_hits search option. A boolean value (true, false) indicates whether the total hit count should be tracked in the response. When set as an integer this option allows to compute a lower bound of the total hits while preserving the ability to skip non-competitive hits when enough matches have been collected.
Relates #33028
Now that we unwrap mappings in DocumentMapperParser#extractMappings, it is not
necessary for the mapping definition to always be nested under the type. This
leniency around the mapping format was added in 2341825358.
With the upcoming cross-cluster search alternate execution mode, the CCS
node will be able to split a CCS request into multiple search requests,
one per remote cluster involved. In order to do that, the CCS node has
to be able to signal to each remote cluster that such sub-requests are
part of a CCS request. Each cluster does not know about the other
clusters involved, and does not know either what alias it is given in
the CCS node, hence the CCS coordinating node needs to be able to provide
the alias as part of the search request so that it is used as index prefix
in the returned search hits.
The cluster alias is a notion that's already supported in the search shards
iterator and search shard target, but it is currently used in CCS as both
index prefix and connection lookup key when fanning out to all the shards.
With CCS alternate execution mode the provided cluster alias needs to be
used only as index prefix, as shards are local to each cluster hence no
cluster alias should be used for connection lookups.
The local cluster alias can be set to the SearchRequest at the transport layer
only, and its constructor/getter methods are package private.
Relates to #32125
Today InternalTestClusterTests is still using zen1.
This commit fixes it.
Two types of changes were required:
1. Explicitly pass file discovery host provider setting. It's done in
ESIntegTestCase as a part of the Zen2 feature and should be done here
as well.
2. For the test, that uses autoManageMinMasterNodes = false perform
cluster bootstrap.
Today the routing of a SourceToParse is assigned in a separate step
after the object is created. We can easily forget to set the routing.
With this commit, the routing must be provided in the constructor of
SourceToParse.
Relates #36921
This is a follow-up to some discussions around #36399. Currently we have
relatively confusing compression behavior where compression can be
configured for requests based on transport.compress or a specific
setting for a remote cluster. However, we can only compress responses
based on transport.compress as we do not know where a request is
coming from (currently).
This commit modifies the behavior to NEVER compress responses based on
settings. Instead, a response will only be compressed if the request was
compressed. This commit also updates the documentation to more clearly
described transport level compression.
This commit modifies ESSingleNodeTestCase and ESIntegTestCase and
several concrete test classes to use node names when bootstrapping the
cluster.
Today ClusterBootstrapService.INITIAL_MASTER_NODE_COUNT_SETTING
setting is used to bootstrap clusters in tests. Instead, we want to use
ClusterBootrstapService.INITIAL_MASTER_NODES_SETTING and get rid of
the former setting eventually.
There were two main problems when refactoring InternalTestCluster:
1. Nodes are created one-by-one in buildNode method. And node.name
is created in this method as well. It's not suitable for bootstrapping,
because we need to have the names of all master eligible nodes in
advance, before creating the node with bootstrapping configuration set.
We address this issue by separating buildNode into two methods:
getNodeSettings and buildNode. We first iterate over all nodes to
get nodes settings, then change the setting for the bootstrapping node
and then proceed with building the node.
2. If autoManageMinMasterNodes = false, there is no way for the test to
set the list of bootstrapping nodes because node names are not known in
advance. This problem is solved by adding updateNodesSettings method
to NodeConfigurationSource and ESIntegTestCase (which could be
overridden by concrete integration test class). Once we have the list
of settings for all nodes, the integration test class is allowed to
update it. In our case, we update the
ClusterBootrstapService.INITIAL_MASTER_NODES_SETTING setting.
Single-node discovery is not persisting cluster states, which was caused by a recent 7.0-only
refactoring. This commit ensures that the cluster state is properly persisted when using single-node
discovery and adds a corresponding test.
Commit #36786 updated docs and strings to reference transport.port instead of
transport.tcp.port. However, this breaks backwards compatibility tests
as the tests rely on string configurations and transport.port does not
exist prior to 6.6. This commit reverts the places were we reference
transport.tcp.port for tests. This work will need to be reintroduced in
a backwards compatible way.
This is related to #36652. In 7.0 we plan to deprecate a number of
settings that make reference to the concept of a tcp transport. We
mostly just have a single transport type now (based on tcp). Settings
should only reference tcp if they are referring to socket options. This
commit updates the settings in the docs. And removes string usages of
the old settings. Additionally it adds a missing remote compress setting
to the docs.
This commit removes the originalSettings member from Node. It was only
needed to allows test clusters to recreate the node in certain
situations. Instead, the test cluster now keeps track of these settings.
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of each `SearchHit`. Sort values are already present but they are formatted according to the provided `DocValueFormat` provided. The CCS node needs to be able to reconstruct the lucene `FieldDoc` to include in the `TopFieldDocs` and `CollapseTopFieldDocs` which will feed the `mergeTopDocs` method used to reduce multiple search responses (one per cluster) into one.
This commit adds such information to the `SearchSortValues` and exposes it through a new getter method added to `SearchHit` for retrieval. This info is only serialized at transport and never printed out at REST.
This commit exposes lucene's LatLonShape field as the
default type in GeoShapeFieldMapper. To use the new
indexing approach, simply set "type" : "geo_shape" in
the mappings without setting any of the strategy, precision,
tree_levels, or distance_error_pct parameters. Note the
following when using the new indexing approach:
* geo_shape query does not support querying by
MULTIPOINT.
* LINESTRING and MULTILINESTRING queries do not
yet support WITHIN relation.
* CONTAINS relation is not yet supported.
The tree, precision, tree_levels, distance_error_pct,
and points_only parameters are deprecated.
This commit fixes a test bug introduced with #36597. This caused some
test failure as stored field values comparisons would not work when CBOR
xcontent type was used.
Closes#29080
This commit add support for using sequence numbers to power [optimistic concurrency control](http://en.wikipedia.org/wiki/Optimistic_concurrency_control)
in the delete and index transport actions and requests. A follow up will come with adding sequence
numbers to the update and get results.
Relates #36148
Relates #10708
This commit updates our transport settings for 7.0. It generally takes a
few approaches. First, for normal transport settings, it usestransport.
instead of transport.tcp. Second, it uses transport.tcp, http.tcp,
or network.tcp for all settings that are proxies for OS level socket
settings. Third, it marks the network.tcp.connect_timeout setting for
removal. Network service level settings are only settings that apply to
both the http and transport modules. There is no connect timeout in
http. Fourth, it moves all the transport settings to a single class
TransportSettings similar to the HttpTransportSettings class.
This commit does not actually remove any settings. It just adds the new
renamed settings and adds todos for settings that will be deprecated.
SearchSortValuesTests extends now `AbstractSerializingTestCase` which removes some code duplication and standardizes the way we test `fromXContent`, serialization and equals/hashcode.
Also, we were never creating `SearchSortValues` through their public constructor that accept an array of `DocValueFormat` together with the array of raw sort values. That is covered now, which involved some conversion from `BytesRef` to String in the test.
Also, the previous test was not using doing any equality check against the original and parsed versions in `testFromXContent` due to values being parsed with different types in some cases, which is now covered by converting those values using a new method added to `RandomObjects`. The code was already there as part of `randomStoredFieldValues`, but it is now exposed to be used in other scenarios.
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of the `SearchHits`, specifically:
- lucene `SortField[]` which contains info about the fields that sorting was performed on and their type, which depends on mappings (that the CCS node does not know about)
- collapse field (`String`) that field collapsing was executed on, if requested
- collapse values (`Object[]`) that field collapsing was based on, if requested
This info is needed to be able to reconstruct the `TopFieldDocs` or `CollapseFieldTopDocs` in the CCS coordinating node to feed the `mergeTopDocs` method and reduce multiple search responses received (one per cluster) into one.
This commit adds such information to the `SearchHits` class. It's nullable info that is not serialized through the REST layer. `SearchPhaseController` sets such info at the end of the hits reduction phase.
* Enable parallel restore operations
* Add uuid to restore in progress entries to uniquely identify them
* Adjust restore in progress entries to be a map in cluster state
* Added tests for:
* Parallel restore from two different snapshots
* Parallel restore from a single snapshot to different indices to test uuid identifiers are correctly used by `RestoreService` and routing allocator
* Parallel restore with waiting for completion to test transport actions correctly use uuid identifiers
The commit changes how indices are closed in the MetaDataIndexStateService.
It now uses a 3 steps process where writes are blocked on indices to be closed,
then some verifications are done on shards using the TransportVerifyShardBeforeCloseAction
added in #36249, and finally indices states are moved to CLOSE and their routing
tables removed.
The closing process also takes care of using the pre-7.0 way to close indices if the
cluster contains mixed version of nodes and a node does not support the TransportVerifyShardBeforeCloseAction. It also closes unassigned indices.
Related to #33888
This commit add support to engine operations for resolving and verifying the sequence number and
primary term of the last modification to a document before performing an operation. This is
infrastructure to move our (optimistic concurrency control)[http://en.wikipedia.org/wiki/Optimistic_concurrency_control] API to use sequence numbers instead of internal versioning.
Relates #36148
Relates #10708
There are certain BootstrapCheck checks that may need access environment-specific
values. Watcher's EncryptSensitiveDataBootstrapCheck passes in the node's environment
via a constructor to bypass the shortcoming in BootstrapContext. This commit
pulls in the node's environment into BootstrapContext.
Another case is found in #36519, where it is useful to check the state of the
data-path. Since PathUtils.get and Paths.get are forbidden APIs, we rely on
the environment to retrieve references to things like node data paths.
This means that the BootstrapContext will have the same Settings used in the
Environment, which currently differs from the Node's settings.
Currently TransportRequestOptions allows specific requests to request
compression. This commit removes this and always compresses based on the
settings. Additionally, it removes TransportResponseOptions as they
are unused.
This closes#36399.
* Fix CorruptFileIT to also take last DV generation into account
We currently only prune old .liv generations. With soft_deletes it's important
to also prune DV generations.
* Fix CorruptionUtils to skip the footer bytes after the checksum is read.
Today we read a broken checksum since we also checksum the 8 footer bytes that include
the checksum algorithm and the footer magic.
Closes#36526
`PageCacheRecycler` is the class that creates and holds pages of arrays
for various uses. `BigArrays` is just one user of these pages. This
commit moves the constants that define the page sizes for the recycler
to be on the recycler class.
* Upgrae plugin to latest and expose udp
* Explicit check for windows
* Rename the properties for the port numbers
* Tasks for pre and pos container actions
Redeprecates the `/_xpack/rollup` endpoints in favor of `/_rollup`.
When we cleanup the rollup in a cluster containing 6.x nodes we need to
use `/_xpack/rollup` instead of `/_rollup` because the 6.x nodes don't
know about `/_rollup`. In those cases we must ignore the deprecation
warnings that the 7.0 node will return for the end point.
Closes#36044
Currently our handshake requests do not include a version. This is
unfortunate as we cannot rely on the stream version since it is not the
sending node's version. Instead it is the minimum compatibility version.
The handshake request is currently empty and we do nothing with it. This
should allow us to add data to the request without breaking backwards
compatibility.
This commit adds the version to the handshake request. Additionally, it
allows "future data" to be added to the request. This allows nodes to craft
a version compatible response. And will properly handle additional data in
future handshake requests. The proper handling of "future data" is useful
as this is the only request where we do not know the other node's version.
Finally, it renames the TcpTransportHandshaker to
TransportHandshaker.
This commit modifies BigArrays to take a circuit breaker name and
the circuit breaking service. The default instance of BigArrays that
is passed around everywhere always uses the request breaker. At the
network level, we want to be using the inflight request breaker. So this
change will allow that.
Additionally, as this change moves away from a single instance of
BigArrays, the class is modified to not be a Releasable anymore.
Releasing big arrays was always dispatching to the PageCacheRecycler,
so this change makes the PageCacheRecycler the class that needs to be
managed and torn-down.
Finally, this commit closes#31435 be making the serialization of
transport messages use the inflight request breaker. With this change,
we no longer push the global BigArrays instnace to the network level.
Added helper methods to ESRestTestCase for checking warnings in mixed and current-version-only clusters.
This is supported by a new VersionSpecificWarningsHandler class with associated unit test.
Closes#36251
1. CCR tests work without any changes
2. `testDanglingIndices` require changes the source code (added TODO).
3. `testIndexDeletionWhenNodeRejoins` because it's using just two
nodes, adding the node to exclusions is needed on restart.
4. `testCorruptTranslogTruncationOfReplica` starts dedicated master
one, because otherwise, the cluster does not form, if nodes are stopped
and one node is started back.
5. `testResolvePath` needs TEST cluster, because all nodes are stopped
at the end of the test and it's not possible to perform checks needed
by SUITE cluster.
6. `SnapshotDisruptionIT`. Without changes, the test fails because Zen2
retries snapshot creation as soon as network partition heals. This
results into the race between creating snapshot and test cleanup logic
(deleting index). Zen1 on the
other hand, also schedules retry, but it takes some time after network
partition heals, so cleanup logic executes latter and test passes. The
check that snapshot is eventually created is added to
the end of the test.
The following updates were made:
- Add a new untyped endpoint `{index}/_explain/{id}`.
- Add deprecation warnings to Rest*Action, plus tests in Rest*ActionTests.
- For each REST yml test, make sure there is one version without types, and another legacy version that retains types (called *_with_types.yml).
- Deprecate relevant methods on the Java HLRC requests/ responses.
- Update documentation (for both the REST API and Java HLRC).
Allow `auto_date_histogram` as a valid parent agg for derivative,
cumulative sum, moving average, moving function and serial
differencing pipeline aggregations.
Since all these aggs share the same requirement (sequentially
ordered parent aggs), this commit also refactors to share
the same validation code so that any newly added aggs won't
be forgotten.
Closes#35578
This change adds a way to provide the content type of the rest serialization
tests when creating random instances. This is used by SearchHitsTests to ensure
that the internal members of the class are created with the same xContentType
and that equals can be used to compare an instances created from an XContent
view.
This allows you to plug the behavior that the LLRC uses to handle
warnings on a per request basis.
We entertained the idea of allowing you to set the warnings behavior to
strict mode on a per request basis but that wouldn't allow the high
level rest client to fail when it sees an unexpected warning.
We also entertained the idea of adding a list of "required warnings" to
the `RequestOptions` but that won't work well with failures that occur
*sometimes* like those we see in mixed clusters.
Adding a list of "allowed warnings" to the `RequestOptions` would work
for mixed clusters but it'd leave many of the assertions in our tests
weaker than we'd like.
This behavior plugging implementation allows us to make a "required
warnings" option when we need it and an "allowed warnings" behavior when
we need it.
I don't think this behavior is going to be commonly used by used outside
of the Elasticsearch build, but I expect they'll be a few commendably
paranoid folks who could use this behavior.
We support rolling upgrades from Zen1 by keeping the master as a Zen1 node
until there are no more Zen1 nodes in the cluster, using the following
principles:
- Zen1 nodes will never vote for Zen2 nodes
- Zen2 nodes will, while not bootstrapped, vote for Zen1 nodes
- Zen2 nodes that were previously part of a mixed cluster will automatically
(and unsafely) bootstrap themselves when the last Zen1 node leaves.
This is related to #35975. It implements a basic restore functionality
for the CcrRepository. When the restore process is kicked off, it
configures the new index as expected for a follower index. This means
that the index has a different uuid, the version is not incremented, and
the Ccr metadata is installed.
When the restore shard method is called, an empty shard is initialized.
In #34474, we added a new assertion to ensure that the
LocalCheckpointTracker is always consistent with Lucene index. However,
we reset LocalCheckpoinTracker in testDedupByPrimaryTerm cause this
assertion to be violated.
This commit removes resetCheckpoint from LocalCheckpointTracker and
rewrites testDedupByPrimaryTerm without resetting the local checkpoint.
Relates #34474
Today the InternalTestClusterTests sometimes set up a cluster with a single
master, start some other ndoes, shut the original master down, and then reset
the cluster. This doesn't really work, because the original master may be
stale. This change avoids shutting down the only master in this situation.
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).
Relates #33028
Nhat Nguyen
Christoph Büscher
Lee Hinman
Julie Tibshirani
Tim Brooks
Tim Vernum
Jason Tedor
David Turner
Luca Cavanna
Yogesh Gaikwad
Mayya Sharipova
markharwood
Andrey Ershov
Armin Braun
Yuri Astrakhan
Przemyslaw Gomulka
Henning Andersen
Alexander Reelsen
Nik Everett
Colin Goodheart-Smithe
Jim Ferenczi
Tal Levy
Alpar Torok
Yannick Welsch
Boaz Leskes
Tanguy Leroux
Marios Trivyzas
Daniel Mitterdorfer
Simon Willnauer
David Findley
Josh Soref
Alan Woodward
Ryan Ernst
Nicholas Knize
Jernej Klancic