* Change SecurityNioHttpServerTransportTests to use PEM key and
certificate files instead of a JKS keystore so that this tests
can also run in a FIPS 140 JVM
* Do not attempt to run cases with ssl.verification_mode NONE in
SessionFactoryTests so that the tests can run in a FIPS 140 JVM
This modifies Def to use a Map<String, LocalMethod> to look up user-defined methods at runtime
instead of writing constant methodhandles to do the reverse lookup. This creates a consistency
between how LocalMethods are looked up at compile-time and run-time. This consistency will allow
this code to be more maintainable moving forward. This will also allow FunctionReference to be
cleaned up in a follow up PR.
This commit adds the ML results classes to the X-Pack protocol
library used by the high level REST client.
(Other commits will add the config classes and stats classes.)
These classes:
- Are publically immutable
- Are privately mutable - this is perhaps not as nice as the
config classes, but to do otherwise would require adding
builders and the corresponding server-side classes that the
old transport client used don't have builders
- Have little/no validation of field values beyond null checks
- Are convertible to and from X-Content, but NOT wire transportable
- Have lenient parsers to maximize compatibility across versions
- Have the same class names and getter names as the corresponding
classes in X-Pack core to ease migration for transport client
users
- Don't reproduce all the methods that do calculations or
transformations that the the corresponding classes in X-Pack core
have
The testPutLicense test tries to put a license generated using
snapshot keys into release cluster. This commit suppresses the
test during the release builds.
Closes#32580
Bumping down the version to 6.4 since the backport is complete. Also
adds some missing version checks to the bwc tests to make sure it
only runs on the correct versions
Previously, we were using a simple CRC32 for the IDs of rollup documents.
This is a very poor choice however, since 32bit IDs leads to collisions
between documents very quickly.
This commit moves Rollups over to a 128bit ID. The ID is a concatenation
of all the keys in the document (similar to the rolling CRC before),
hashed with 128bit Murmur3, then base64 encoded. Finally, the job
ID and a delimiter (`$`) are prepended to the ID.
This gurantees that there are 128bits per-job. 128bits should
essentially remove all chances of collisions, and the prepended
job ID means that _if_ there is a collision, it stays "within"
the job.
BWC notes:
We can only upgrade the ID scheme after we know there has been a good
checkpoint during indexing. We don't rely on a STARTED/STOPPED
status since we can't guarantee that resulted from a real checkpoint,
or other state. So we only upgrade the ID after we have reached
a checkpoint state during an active index run, and only after the
checkpoint has been confirmed.
Once a job has been upgraded and checkpointed, the version increments
and the new ID is used in the future. All new jobs use the
new ID from the start
This commit adds four ML config classes to the X-Pack protocol
library used by the high level REST client.
(Other commits will add the remaining config classes, plus results
and stats classes.)
These classes:
- Are immutable
- Have little/no validation of field values beyond null checks
- Are convertible to and from X-Content, but NOT wire transportable
- Have lenient parsers to maximize compatibility across versions
- Have the same class names, member names and getter/setter names
as the corresponding classes in X-Pack core to ease migration
for transport client users
- Don't reproduce all the methods that do calculations or
transformations that the the corresponding classes in X-Pack core
have
This commit splits SecurityNetty4TransportTests in two methods
one handling verification mode certificate and full and one
handling verification mode none. This is done so that the second
method can be muted in a FIPS 140 JVM where verification mode none
cannot be used.
Some classes use internal date formatters, which now can be moved over
to java time using the DateFormatters class.
The same applies for a few test cases.
Same motivation as #32507 but for the DateHistogramGroupConfig
configuration object. This pull request also changes the format of the
time zone from a Joda's DateTimeZone to a simple String.
It should help to port the API to the high level rest client and allows
clients to not be forced to use the Joda Time library. Serialization is
impacted but does not need a backward compatibility layer as
DateTimeZone are serialized as String anyway. XContent also expects
a String for timezone, so I found it easier to move everything to String.
Related to #29827
This unmutes the testFanOutAndCollect()` method and add a check to make
sure we aren't accidentally running something twice causing a search
phase to still be running after we have counted down the latch
Relates to #29242
This commit adds the Detector class and its dependencies to the
X-Pack protocol library used by the high level REST client.
(Future commits will add the remaining config classes, plus results
and stats classes.)
These classes:
- Are immutable, with builders, but the builders do no validation
beyond null checks
- Are convertible to and from X-Content, but NOT wire transportable
- Have lenient parsers to maximize compatibility across versions
- Have the same class names, member names and getter/setter names
as the corresponding classes in X-Pack core to ease migration
for transport client users
- Don't reproduce all the methods that do calculations or
transformations that the the corresponding classes in X-Pack core
have
These tests ensure, that the basic watch APIs are tested in the rolling
upgrade tests. After initially adding a watch, the tests try to get,
execute, deactivate and activate a watch. Watcher stats are tested as
well, and an own java based test has been added for restarting, as that
requires waiting for a state change. Watcher history is also checked.
Closes#31216
We've recently seen a number of test failures that tripped an assertion in IndexShard (see issues
linked below), leading to the discovery of a race between resetting a replica when it learns about a
higher term and when the same replica is promoted to primary. This commit fixes the race by
distinguishing between a cluster state primary term (called pendingPrimaryTerm) and a shard-level
operation term. The former is set during the cluster state update or when a replica learns about a
new primary. The latter is only incremented under the operation block, which can happen in a
delayed fashion. It also solves the issue where a replica that's still adjusting to the new term
receives a cluster state update that promotes it to primary, which can happen in the situation of
multiple nodes being shut down in short succession. In that case, the cluster state update thread
would call `asyncBlockOperations` in `updateShardState`, which in turn would throw an exception
as blocking permits is not allowed while an ongoing block is in place, subsequently failing the shard.
This commit therefore extends the IndexShardOperationPermits to allow it to queue multiple blocks
(which will all take precedence over operations acquiring permits). Finally, it also moves the primary
activation of the replication tracker under the operation block, so that the actual transition to
primary only happens under the operation block.
Relates to #32431, #32304 and #32118
The commercial clients were improperly placed into XPackClient, which is
a wrapper for the miscellaneous usage and info APIs. This commit moves
them into the HLRC.
* Make cluster stats response contain cluster UUID
* Updating constructor usage in Monitoring tests
* Adding cluster_uuid field to Cluster Stats API reference doc
* Adding rest api spec test for expecting cluster_uuid in cluster stats response
* Adding missing newline
* Indenting do section properly
* Missed a spot!
* Fixing the test cluster ID
The User class has been moved to the protocol project for upcoming work
to add more security APIs to the high level rest client. As part of
this change, the toString method no longer uses a custom output method
from MetadataUtils and instead just relies on Java's toString
implementation.
Unmuting the test and adding some more debug output. Was not able to
reproduce the prior failure, but it seems possible that the
failure (mismatched counts) could be caused by partial search results
during the test.
The assertions check for shard failures first, because if one of the
two searches is partial the rest of the test will fail.
Next, instead of just checking respective hit counts, we emit the
difference in hits to help identify what went wrong.
Closes#32492
Renames existing methods in PainlessLookup. Adds lookupPainlessClass,
lookupPainlessMethod, and lookupPainlessField to PainlessLookup. This consolidates
the logic necessary to look these things up into a single place and begins the clean up of
some of the nodes that were looking each of these things up individually. This also has
the added benefit of improved consistency in error messaging.
Since LUCENE-8263, testSeqNoAndCheckpoints might trigger merges because
of the updates and deletes in the test. Our merge scheduler will trigger
a flush if there is no pending merge. Those extra flushes will change
the last committed segmentInfos in the engine and fail the test.
This commit uses LogMergePolicy for the engine in the test to avoid
merges.
Closes#32430
This commit removes the never released multiple_bucket_spans
configuration parameter. This is now replaced with the new
multibucket feature that requires no configuration.
This commit adds the elastic repo, alongside maven central, to any
plugin using BuildPlugin. This is necessary now because the default
distribution, which the test framework uses by default, is now only
hosted on elastic maven. While inside the elasticsearch build this does
not matter, those that build external plugins with our build-tools could
have tests fail to find the distribution dependency.
This commit adds a boolean system property, `es.scripting.use_java_time`,
which controls the concrete return type used by doc values within
scripts. The return type of accessing doc values for a date field is
changed to Object, essentially duck typing the type to allow
co-existence during the transition from joda time to java time.
This removes a constructor from `AbstractComponent` and
`AbstractLifecycleComponent` that we weren't using and it switches the
logger creation away from one of the `Settings` flavored methods which
are no longer needed.
Added support for string manipulating functions with more than one parameter:
CONCAT, LEFT, RIGHT, REPEAT, POSITION, LOCATE, REPLACE, SUBSTRING, INSERT
Ioannis Kakavas
Armin Braun
Jack Conradson
Lee Hinman
David Roberts
Igor Motov
Zachary Tong
David Turner
Zachary Tong
Jake Landis
Alexander Reelsen
Tanguy Leroux
Colin Goodheart-Smithe
Yannick Welsch
Michael Basnight
Shaunak Kashyap
Jay Modi
Andrei Stefan
Nhat Nguyen
Matthias Sieber
Dimitris Athanasiou
David Kyle
Mayya Sharipova
Ryan Ernst
Julie Tibshirani
Andy Bristol
Benjamin Trent
Nik Everett