The new ops based recovery, introduce as part of #10708, is based on the assumption that all operations below the global checkpoint known to the replica do not need to be synced with the primary. This is based on the guarantee that all ops below it are available on primary and they are equal. Under normal operations this guarantee holds. Sadly, it can be violated when a primary is restored from an old snapshot. At the point the restore primary can miss operations below the replica's global checkpoint, or even worse may have total different operations at the same spot. This PR introduces the notion of a history uuid to be able to capture the difference with the restored primary (in a follow up PR).
The History UUID is generated by a primary when it is first created and is synced to the replicas which are recovered via a file based recovery. The PR adds a requirement to ops based recovery to make sure that the history uuid of the source and the target are equal. Under normal operations, all shard copies will stay with that history uuid for the rest of the index lifetime and thus this is a noop. However, it gives us a place to guarantee we fall back to file base syncing in special events like a restore from snapshot (to be done as a follow up) and when someone calls the truncate translog command which can go wrong when combined with primary recovery (this is done in this PR).
We considered in the past to use the translog uuid for this function (i.e., sync it across copies) and thus avoid adding an extra identifier. This idea was rejected as it removes the ability to verify that a specific translog really belongs to a specific lucene index. We also feel that having a history uuid will serve us well in the future.
Removing several occurrences of this typo in the docs and javadocs, seems to be
a common mistake. Corrections turn up once in a while in PRs, better to correct
some of this in one sweep.
* Fix percolator highlight sub fetch phase to not highlight query twice
The PercolatorHighlightSubFetchPhase does not override hitExecute and since it extends HighlightPhase the search hits
are highlighted twice (by the highlight phase and then by the percolator). This does not alter the results, the second highlighting
just overrides the first one but this slow down the request because it duplicates the work.
Requesting to many script_fields in a search request can be costly
because of script execution. This change introduces a soft limit on the number
of script fields that are allowed per request. The setting can be
changed per index using the index.max_script_fields setting.
Relates to #26390
Requesting to many docvalue_fields in a search request can potentially be costly
because it might incur a per-field per-document seek. This change introduces a
soft limit on the number of fields that can be retrieved. The setting can be
changed per index using the `index.max_docvalue_fields_search` setting.
Relates to #26390
You can define a proxy using the following settings:
```yml
azure.client.default.proxy.host: proxy.host
azure.client.default.proxy.port: 8888
azure.client.default.proxy.type: http
```
Supported values for `proxy.type` are `direct`, `http` or `socks`. Defaults to `direct` (no proxy).
Closes#23506
BTW I changed a test `testGetSelectedClientBackoffPolicyNbRetries` as it was using an old setting name `cloud.azure.storage.azure.max_retries` instead of `azure.client.azure1.max_retries`.
Follow up for #23405.
We remove azure deprecated settings in 7.0:
* The legacy azure settings which where starting with `cloud.azure.storage.` prefix have been removed.
This includes `account`, `key`, `default` and `timeout`.
You need to use settings which are starting with `azure.client.` prefix instead.
* Global timeout setting `cloud.azure.storage.timeout` has been removed.
You must set it per azure client instead. Like `azure.client.default.timeout: 10s` for example.
* Limit the number of expanded fields it query_string and simple_query_string
This limits the number of automatically expanded fields for the "all fields"
mode (`"default_field": "*"`) for the `query_string` and `simple_query_string`
queries to 1024 fields.
Resolves#25105
* Add blurb about limit to the docs
The percolator will add a `_percolator_document_slot` field to all percolator
hits to indicate with what document it has matched. This number matches with
the order in which the documents have been specified in the percolate query.
Also improved the support for multiple percolate queries in a search request.
This change exposes the duplicate removal option added in Lucene for the completion suggester
with a new option called `skip_duplicates` (defaults to false).
This commit also adapts the custom suggest collector to handle deduplication when multiple contexts match the input.
Closes#23364
The current "Building Queries" and "Building Aggregations" pages are
located under the "Supported Apis" section because they are linked to
the "Search API" page.
It should instead be in a dedicated section: this commit adds a new
"Using Java Builders" section and renames few filenames in favor of
more meaningful names.
The `index.percolator.map_unmapped_fields_as_text` is a more better name, because unmapped fields are mapped to a text field with default settings
and string is no longer a field type (it is either keyword or text).
The definition of development vs. production mode has evolved slightly
over time (with the introduction of single-node) discovery. This commit
clarifies the documentation to better account for this adjustment.
Relates #26460
Adding a check to QueryStringQueryBuilderTests that checks the override
behaviour of `quote_analyzer`, also adding documentation explaining the use of
this parameter in `query_string` query.
Closes#25417
The current script service has a script compilation limit for a one
minute window. This is set to a small default value of 15. Instead of
increasing that default value, this commit introduces a new setting
that allows to configure a rate per time unit, so that the script service can deal with bursts better.
The new setting is named `script.max_compilations_rate`,
requires a nonnegative number and a positive time value.
The default is `75/5m`, which is equivalent to the existing 15 per minute.
Multi-level Nested Sort with Filters
Allow multiple levels of nested sorting where each level can have it's own filter.
Backward compatible with previous single-level nested sort.
* Remove the _all metadata field
This change removes the `_all` metadata field. This field is deprecated in 6
and cannot be activated for indices created in 6 so it can be safely removed in
the next major version (e.g. 7).
At current, we do not feel there is enough of a reason to shade the low
level rest client. It caused problems with commons logging and IDE's
during the brief time it was used. We did not know exactly how many
users will need this, and decided that leaving shading out until we
gather more information is best. Users can still shade the jar
themselves. For information and feeback, see issue #26366.
Closes#26328
This reverts commit 3a20922046.
This reverts commit 2c271f0f22.
This reverts commit 9d10dbea39.
This reverts commit e816ef89a2.
587409e893 introduced a bug where an example of the format of a request which contained placeholder values was attempted to be tested. This change adds `NOTCONSOLE` to that snippet as the immediately following snippet tests a concrete example.
220212dd69 introduced a bug because the test substitution was looking for `otherhost` where the snippet contained `oldhost`. This change fixes the substitution
By making RestHighLevelClient Closeable, its close method will close the internal low-level REST client instance by default, which simplifies the way most users interact with the high-level client.
Its constructor accepts now a RestClientBuilder, which clarifies that the low-level REST client is internally created and managed.
It is still possible to provide an already built `RestClient` instance, but that can only be done by subclassing `RestHighLevelClient` and calling the protected constructor that accepts a `RestClient`. In such case a consumer has also to be provided, which controls what has to be done when the high-level client gets done.
Closes#26086
* Accept an array of field names and boosts in the index.query.default_field setting
This commit allows to define an array of field names and boosts for the index setting `index.query.default_field`.
The format is equivalent to the `fields` options of the full text search queries (e.g. field_name^boost).
This commit also makes this setting dynamically updatable.
Fixes#25946
* Deprecate global_ordinals_hash and global_ordinals_low_cardinality
This change deprecates the `global_ordinals_hash` and `global_ordinals_low_cardinality` and
makes the `global_ordinals` execution hint choose internally if global ords should be remapped or use the segment ord directly.
These hints are too sensitive and expert to be exposed and we should be able to take the right decision internally based on the agg tree.
Currently the `precision` parameter must be a precision level
in the range of [1,12]. In #5042 it was suggested also supporting
distance units like "1km" to automatically approcimate the needed
precision level. This change adds this support to the Rest API by
making use of GeoUtils#geoHashLevelsForPrecision.
Plain integer values without a unit are still treated as precision
levels like before. Distance values that are too small to be represented
by a precision level of 12 (values approx. less than 0.056m) are
rejected.
Closes#5042
There was some confusion about the fact that tokens emitted from a Pattern
Capture Token Filter are treated as synonyms when used to analyze a search
query. This commit adds an explanation to the note in the docs to emphasize this
behaviour.
Closes#25746
This change is a continuation of #25726 that aligns field expansions for the simple_query_string with the query_string and multi_match query.
The main changes are:
* For exact field name, the new behavior is to rewrite to a matchnodocs query when the field name is not found in the mapping.
* For partial field names (with * suffix), the expansion is done only on keyword, text, date, ip and number field types. Other field types are simply ignored.
* For all fields (*), the expansion is done on accepted field types only (see above) and metadata fields are also filtered.
The use_all_fields option is deprecated in this change and can be replaced by setting `*` in the fields parameter.
This commit also changes how text fields are analyzed. Previously the default search analyzer (or the provided analyzer) was used to analyze every text part
, ignoring the analyzer set on the field in the mapping. With this change, the field analyzer is used instead unless an analyzer has been forced in the parameter of the query.
Finally now that all full text queries can handle the special "*" expansion (`all_fields` mode), the `index.query.default_field` is now set to `*` for indices created in 6.
We use `:` for cross-cluster search (eg `cluster:index`), therefore, we should
not allow the ambiguity when allowing cluster or index names.
Relates to #23892
Links to inner classes were using `$` in urls instead of `.`, causing
them to 404.
Also fixes the doc generation code to generate docs into the correct
directory. We moved the docs but never updated the generation code.
All of the snippets in our docs marked with `// TESTRESPONSE` are
checked against the response from Elasticsearch but, due to the
way they are implemented they are actually parsed as YAML instead
of JSON. Luckilly, all valid JSON is valid YAML! Unfurtunately
that means that invalid JSON has snuck into the exmples!
This adds a step during the build to parse them as JSON and fail
the build if they don't parse.
But no! It isn't quite that simple. The displayed text of some of
these responses looks like:
```
{
...
"aggregations": {
"range": {
"buckets": [
{
"to": 1.4436576E12,
"to_as_string": "10-2015",
"doc_count": 7,
"key": "*-10-2015"
},
{
"from": 1.4436576E12,
"from_as_string": "10-2015",
"doc_count": 0,
"key": "10-2015-*"
}
]
}
}
}
```
Note the `...` which isn't valid json but we like it anyway and want
it in the output. We use substitution rules to convert the `...`
into the response we expect. That yields a response that looks like:
```
{
"took": $body.took,"timed_out": false,"_shards": $body._shards,"hits": $body.hits,
"aggregations": {
"range": {
"buckets": [
{
"to": 1.4436576E12,
"to_as_string": "10-2015",
"doc_count": 7,
"key": "*-10-2015"
},
{
"from": 1.4436576E12,
"from_as_string": "10-2015",
"doc_count": 0,
"key": "10-2015-*"
}
]
}
}
}
```
That is what the tests consume but it isn't valid JSON! Oh no! We don't
want to go update all the substitution rules because that'd be huge and,
ultimately, wouldn't buy much. So we quote the `$body.took` bits before
parsing the JSON.
Note the responses that we use for the `_cat` APIs are all converted into
regexes and there is no expectation that they are valid JSON.
Closes#26233
* Migrate migration docs from 6.0 to 7.0
Since we only keep one version of migration docs and master is now on 7.0, we
should migrate these so breaking changes can be added in the right place.
* Remove release notes as well
They link to the migration guides, so they have to go.
* Add placeholder notes for 7.0 so doc build is happy
The names of two settings in the script security docs are incorrect,
referring to the prefix as "scripts" instead of "script". This commit
fixes this issue.
Relates #26236
In #26185 we made the description of `requests_per_second` sane
for reindex. This improves on the description by using some more
common vocabulary ("batch size", etc) and improving the formatting
of the example calculation so it stands out and doesn't require
scrolling.
An array of values is required because there is no default (or
reasonable way to set a default). But validation for values
only happens if it is actually set. If the values param is omitted
entirely than the agg builder will NPE.
The environment variable CONF_DIR was previously inconsistently used in
our packaging to customize the location of Elasticsearch configuration
files. The importance of this environment variable has increased
starting in 6.0.0 as it's now used consistently to ensure Elasticsearch
and all secondary scripts (e.g., elasticsearch-keystore) all use the
same configuration. The name CONF_DIR is there for legacy reasons yet
it's too generic. This commit renames CONF_DIR to ES_PATH_CONF.
Relates #26197
In reindex APIs, when using the `slices` parameter to choose the number of slices, adds the option to specify `slices` as "auto" which will choose a reasonable number of slices. It uses the number of shards in the source index, up to a ceiling. If there is more than one source index, it uses the smallest number of shards among them.
This gives users an easy way to use slicing in these APIs without having to make decisions about how to configure it, as it provides a good-enough configuration for them out of the box. This may become the default behavior for these APIs in the future.
The percolator field mapper doesn't need to extract all terms and ranges from a bool query with must or filter clauses.
In order to help to default extraction behavior, boost fields can be configured, so that fields that are known for not being
selective enough can be ignored in favor for other fields or clauses with specific fields can forcefully take precedence over other clauses.
This can help selecting clauses for fields that don't match with a lot of percolator queries over other clauses and thus improving performance of the percolate query.
For example a status like field is something that should configured as an ignore field.
Queries on this field tend to match with more documents and so if clauses for this fields
get selected as best clause then that isn't very helpful for the candidate query that the
percolate query generates to filter out percolator queries that are likely not going to match.
With this commit we remove the following three previously unused
(and undocumented) Netty 4 related settings:
* transport.netty.max_cumulation_buffer_capacity,
* transport.netty.max_composite_buffer_components and
* http.netty.max_cumulation_buffer_capacity
from Elasticsearch.
When using the High Level Rest Client 6.0.0-beta1, we are missing some transitive dependencies for Lucene as Lucene 7 has not been released yet. See the following `pom.xml`:
```xml
<dependency>
<groupId>org.elasticsearch.client</groupId>
<artifactId>elasticsearch-rest-client</artifactId>
<version>6.0.0-beta1</version>
</dependency>
<dependency>
<groupId>org.elasticsearch.client</groupId>
<artifactId>elasticsearch-rest-high-level-client</artifactId>
<version>6.0.0-beta1</version>
</dependency>
```
It gives:
```
[ERROR] Failed to execute goal on project fscrawler: Could not resolve dependencies for project fr.pilato.elasticsearch.crawler:fscrawler:jar:2.4-SNAPSHOT: The following artifacts could not be resolved: org.apache.lucene:lucene-analyzers-common:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-backward-codecs:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-grouping:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-highlighter:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-join:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-memory:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-misc:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-queries:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-queryparser:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-sandbox:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-spatial:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-spatial-extras:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-spatial3d:jar:7.0.0-snapshot-00142c9, org.apache.lucene:lucene-suggest:jar:7.0.0-snapshot-00142c9: Failure to find org.apache.lucene:lucene-analyzers-common:jar:7.0.0-snapshot-00142c9 in https://artifacts.elastic.co/maven/ was cached in the local repository, resolution will not be reattempted until the update interval of elastic-download-service has elapsed or updates are forced -
```
We need to add some temporary documentation on how to add the missing repository to a gradle or maven project:
```xml
<repository>
<id>elastic-lucene-snapshots</id>
<name>Elastic Lucene Snapshots</name>
<url>http://s3.amazonaws.com/download.elasticsearch.org/lucenesnapshots/00142c9</url>
<releases><enabled>true</enabled></releases>
<snapshots><enabled>false</enabled></snapshots>
</repository>
```
This also applies to the transport client.
Closes#26106.
* Add support for auto_generate_synonyms_phrase_query in match_query, multi_match_query, query_string and simple_query_string
This change adds a new parameter called auto_generate_synonyms_phrase_query (defaults to true).
This option can be used in conjunction with synonym_graph token filter to generate phrase queries
when multi terms synonyms are encountered.
For example, a synonym like "ny, new york" would produce the following boolean query when "ny city" is parsed:
((ny OR "new york") AND city)
Note how the multi terms synonym "new york" produces a phrase query.
We should have the same behavior for Azure repositories as we have for S3 (see #22762).
Instead of:
```yml
cloud:
azure:
storage:
my_account1:
account: your_azure_storage_account1
key: your_azure_storage_key1
default: true
my_account2:
account: your_azure_storage_account2
key: your_azure_storage_key2
```
Support something like:
```
azure.client:
default:
account: your_azure_storage_account1
key: your_azure_storage_key1
my_account2:
account: your_azure_storage_account2
key: your_azure_storage_key2
```
Then instead of:
```
PUT _snapshot/my_backup3
{
"type": "azure",
"settings": {
"account": "my_account2"
}
}
```
Use:
```
PUT _snapshot/my_backup3
{
"type": "azure",
"settings": {
"config": "my_account2"
}
}
```
If someone uses:
```
PUT _snapshot/my_backup3
{
"type": "azure"
}
```
It will use the `default` azure repository settings.
And mark as deprecated old settings.
Closes#22763.
The goal of this similarity is to help users who would like to keep the
functionality of the `tf-idf` similarity that we want to remove, or to allow
for specific usec-cases (disabling idf, disabling tf, disabling length norm,
etc.) to not have to build a custom plugin and familiarize with the low-level
Lucene API.
Raw requests are supported only by the java yaml test runner and were introduced to test docs snippets. Some yaml tests ended up using them (see #23497) which causes failures for other language clients. This commit migrates those yaml tests to Java tests that send requests through the Java low-level REST client, and also moves the ability to send raw requests to a special client that's only available when testing docs snippets.
Closes#25694
This commit updates the s3 repository docs to clearly mark settings as
part of the s3 client settings, as well as those that are secure and
must be stored in the elasticsearch keystore.
relates #25619
The s3 repository plugin has "third party" integ tests which rely
on external service and configuration setup. These tests are really
internal verification of the plugin (and should be moved to real integ
tests). Running them is not something a user should do, and the
documentation has been out of date for all of 5.x. This commit removes
the docs, removing potential confusion for users.
This commit adds a small note to the discovery docs to include a note
that we recommend that the unicast hosts list be maintained as the list
of master-eligible nodes in the cluster.
Relates #25991
This commit updates the docs for the config files to explain the new
mechanism for customizing the configuration directory via the
environment variable CONF_DIR.
Relates #25990
We publish javadocs to artifacts.elastic.co (and snapshots.elastic.co) for a while. This commit adds the link to them to the transport client, low level REST client, sniffer and high level REST client pages.
Closes#23761
This commit removes an outdated reference to http_address in the nodes
info docs. This information is available in the http object for each
node in the nodes info API response.
Relates #25980
On non-Windows platforms, we ignore the environment variable
JAVA_TOOL_OPTIONS (this is an environment variable that the JVM respects
by default for picking up extra JVM options). The primary reason that we
ignore this because of the Jayatana agent on Ubuntu; a secondary reason
is that it produces an annoying "Picked up JAVA_TOOL_OPTIONS: ..."
output message. When the elasticsearch-env batch script was introduced
for Windows, ignoring this environment variable was deliberately not
carried over as the primary reason does not apply on Windows. However,
after additional thinking, it seems that we should simply be consistent
to the extent possible here (and also avoid that annoying "Picked up
JAVA_TOOL_OPTIONS: ..." on Windows too). This commit causes the Windows
version of elasticsearch-env to also ignore JAVA_TOOL_OPTIONS.
Relates #25968
This commit adds a bootstrap check for the maximum file size, and
ensures the limit is set correctly when Elasticsearch is installed as a
service on systemd-based systems.
Relates #25974
The Writeble representation is less heavy to parse and that will benefit percolate performance and throughput.
The query builder's binary format has now the same bwc guarentees as the xcontent format.
Added a qa test that verifies that percolator queries written in older versions are still readable by the current version.
The example output for node info and cluster stats was outdated w.r.t.
to the information that is shown for plugins. With this commit we
updated the example output and update the explanation of the respective
fields.
This commit changes the way we handle field expansion in `match`, `multi_match` and `query_string` query.
The main changes are:
- For exact field name, the new behavior is to rewrite to a matchnodocs query when the field name is not found in the mapping.
- For partial field names (with `*` suffix), the expansion is done only on `keyword`, `text`, `date`, `ip` and `number` field types. Other field types are simply ignored.
- For all fields (`*`), the expansion is done on accepted field types only (see above) and metadata fields are also filtered.
- The `*` notation can also be used to set `default_field` option on`query_string` query. This should replace the needs for the extra option `use_all_fields` which is deprecated in this change.
This commit also rewrites simple `*` query to matchalldocs query when all fields are requested (Fixes#25556).
The same change should be done on `simple_query_string` for completeness.
`use_all_fields` option in `query_string` is also deprecated in this change, `default_field` should be set to `*` instead.
Relates #25551
This commit adds the min wire/index compat versions to the main action
output. Not only will this make the compatility expected more
transparent, but it also allows to test which version others think the
compat versions are, similar to how we test the lucene version.
When a node tries to join a cluster, it goes through a validation step to make sure the node is compatible with the cluster. Currently we validation that the node can read the cluster state and that it is compatible with the indexes of the cluster. This PR adds validation that the joining node's version is compatible with the versions of existing nodes. Concretely we check that:
1) The node's min compatible version is higher or equal to any node in the cluster (this prevents a too-new node from joining)
2) The node's version is higher or equal to the min compat version of all cluster nodes (this prevents a too old join where, for example, the master is on 5.6, there's another 6.0 node in the cluster and a 5.4 node tries to join).
3) The node's major version is at least as higher as the lowest node in the cluster. This is important as we use the minimum version in the cluster to stop executing bwc code for operations that require multiple nodes. If the nodes are already operating in "new cluster mode", we should prevent nodes from the previous major to join (even if they are wire level compatible). This does mean that if you have a very unlucky partition during the upgrade which partitions all old nodes which are also a minority / data nodes only, the may not be able to re-join the cluster. We feel this edge case risk is well worth the simplification it brings to BWC layers only going one way. This restriction only holds if the cluster state has been recovered (i.e., the cluster has properly formed).
Also, the node join validation can now selectively fail specific nodes (previously the entire batch was failed). This is an important preparation for a follow up PR where we plan to have a rejected joining node die with dignity.
Also has updates to ScriptMetaData for allowing the old namespace format to be loaded all the way back through 5.0; however, it will throw an exception if two scripts share the same id but different languages.
This commit calls the `useSystemProperties` method on the HttpAsyncClientBuilder so that the jvm
system properties are used. The primary reason for doing this is to ensure the builder uses the
system default SSLContext rather than the default instance created by the http client library.
Closes#23231
Today we enable users to customize the environment through the use of
ES_INCLUDE. This made sense for legacy reasons when we did not have
nicities like jvm.options (so dumped JVM options in the default include
script) and somewhat duplicates some of the functionality that we will
need from a dedicated environment script. This commit removes support
for ES_INCLUDE as a first step towards a dedicated include script.
Relates #25804
We currently use fielddata on the `_id` field which is trappy, especially as we
do it implicitly. This changes the `random_score` function to use doc ids when
no seed is provided and to suggest a field when a seed is provided.
For now the change only emits a deprecation warning when no field is supplied
but this should be replaced by a strict check on 7.0.
Closes#25240
When a node tries to join a cluster, it goes through a validation step to make sure the node is compatible with the cluster. Currently we validation that the node can read the cluster state and that it is compatible with the indexes of the cluster. This PR adds validation that the joining node's version is compatible with the versions of existing nodes. Concretely we check that:
1) The node's min compatible version is higher or equal to any node in the cluster (this prevents a too-new node from joining)
2) The node's version is higher or equal to the min compat version of all cluster nodes (this prevents a too old join where, for example, the master is on 5.6, there's another 6.0 node in the cluster and a 5.4 node tries to join).
3) The node's major version is at least as higher as the lowest node in the cluster. This is important as we use the minimum version in the cluster to stop executing bwc code for operations that require multiple nodes. If the nodes are already operating in "new cluster mode", we should prevent nodes from the previous major to join (even if they are wire level compatible). This does mean that if you have a very unlucky partition during the upgrade which partitions all old nodes which are also a minority / data nodes only, the may not be able to re-join the cluster. We feel this edge case risk is well worth the simplification it brings to BWC layers only going one way.
Also, the node join validation can now selectively fail specific nodes (previously the entire batch was failed). This is an important preparation for a follow up PR where we plan to have a rejected joining node die with dignity.
This commit expands on the migration note regarding the removal of
default.path.data and default.path.logs to include a note that users
that were relying on the defaults (the common case for path.logs), and
they carry over their previous elasticsearch.yml configruation file,
then they must add explicit values for path.data and path.logs.
403 can be confused with security. If an API doesn't support working against closed indices and closed indices are referred to in a request, that is a bad request, hence 400 is more appropriate.
Currently the `to` and `from` parameter in the `date_range` aggregation is not
parsed with the correct date field format from the mappings or the aggregation
if the argument is numeric, but always treated as a long value specifying
`epoch_millis`. This leads to problems e.g. when the format is `epoch_second`,
but the `to` and `from` are currently treated as millis.
With this change, we interpret these parameters according to the `format` of the target field.
If the `format` in the mappings is not compatible with numeric input values,
a compatible `format` (e.g. `epoch_millis`, `epoch_second`) must be specified in
the `date_range` aggregation itself, otherwise an error is thrown.
#Closes #17920
This change removes the leniency of having a `null` index to fetch
terms from in 6.0 onwards. This feature will be deprecated in the 5.x series
and 6.0 nodes will require the index to be set.
Closes#25750
When simulating an ingest pipeline against an existing pipeline, the
_source field is required to wrap each doc. This commit fixes another
example in the docs that is missing this.
Relates #25743, relates e3a0c11239
When simulating an ingest pipeline against an existing pipeline, the
_source field is required to wrap each doc. This commit fixes an example
in the docs that is missing this.
Relates #25742
The alpha2 docs is built out of master which may make users think that the high level client was already released as part of alpha2 which it was not. This note should clarify that the client will be released with 6.0.0-beta1
This commit changes the default heap size to 1 GB. Experimenting with
elasticsearch is often done on laptops, and 1 GB is much friendlier to
laptop memory. It does put more pressure on the gc, but the tradeoff is
a smaller default footprint. Users running in production can (and
should) adjust the heap size as necessary for their usecase.
This adds a section about how to add aggregations to the SearchSourceBuilder and how
to retrieve them from a SearchRepsonse to the documentation for the high level rest client.
The Filtered Query has been deprecated in favour of the Bool Query with a filter context. However, this deleted page for the Filtered Query is often ranked highly in search results when searching for documentation on "filtered queries". Often people just copy the first code snippet they see, which in this case is the INCORRECT syntax (the correct syntax follows). I think reordering the examples would help avoid a lot of confusion (I have seen people make this same mistake 3 times now)
Adding a comment to indicate that the first example shouldn't be used
This change refactors the query_string query to analyze the query text around logical operators of the query string the same way than a match_query/multi_match_query.
It also adds a type parameter that can be used to change the way multi fields query are built the same way than a multi_match query does.
Now that these queries share the same behavior regarding text analysis, some parameters are obsolete and have been deprecated:
split_on_whitespace: This setting is now ignored with a deprecation notice
if it is used explicitely. With this PR The query_string always splits on logical operator.
It simplifies the understanding of the other parameters that can have different meanings
depending on the value of split_on_whitespace.
auto_generate_phrase_queries: This setting is now ignored with a deprecation notice
if it is used explicitely. This setting only makes sense when the parser splits on whitespace.
use_dismax: This setting is now ignored with a deprecation notice
if it is used explicitely. The tie_breaker parameter is sufficient to handle best_fields/most_fields.
Fixes#25574
It was brought up that our current client artifacts have generic names like 'rest' that may cause conflicts with other artifacts.
This commit renames:
- rest -> elasticsearch-rest-client
- sniffer -> elasticsearch-rest-client-sniffer
- rest-high-level -> elasticsearch-rest-high-level-client
A couple of small changes are also preparing the high level client for its first release.
Closes#20248
Today if we search across a large amount of shards we hit every shard. Yet, it's quite
common to search across an index pattern for time based indices but filtering will exclude
all results outside a certain time range ie. `now-3d`. While the search can potentially hit
hundreds of shards the majority of the shards might yield 0 results since there is not document
that is within this date range. Kibana for instance does this regularly but used `_field_stats`
to optimize the indexes they need to query. Now with the deprecation of `_field_stats` and it's upcoming removal a single dashboard in kibana can potentially turn into searches hitting hundreds or thousands of shards and that can easily cause search rejections even though the most of the requests are very likely super cheap and only need a query rewriting to early terminate with 0 results.
This change adds a pre-filter phase for searches that can, if the number of shards are higher than a the `pre_filter_shard_size` threshold (defaults to 128 shards), fan out to the shards
and check if the query can potentially match any documents at all. While false positives are possible, a negative response means that no matches are possible. These requests are not subject to rejection and can greatly reduce the number of shards a request needs to hit. The approach here is preferable to the kibana approach with field stats since it correctly handles aliases and uses the correct threadpools to execute these requests. Further it's completely transparent to the user and improves scalability of elasticsearch in general on large clusters.
This commit enables management of the main Elasticsearch log files
out-of-the-box by the following changes:
- compress rolled logs
- roll logs every 128 MB
- maintain a sliding window of logs
- remove the oldest logs maintaining no more than 2 GB of compressed
logs on disk
Relates #25660
This commit removes the environment variable ES_JVM_OPTIONS that allows
the jvm.options file to sit separately from the rest of the config
directory. Instead, we use the CONF_DIR environment variable for custom
configuration location just as we do for the other configuration files.
Relates #25679
Requests that execute a stored script will no longer be allowed to specify the lang of the script. This information is stored in the cluster state making only an id necessary to execute against. Putting a stored script will still require a lang.
Indexing a join field on a document requires a value of type "object" and two sub fields "name"
and "parent". The "parent" field is only required on child documents, but the "name" field which
denotes the name of the relation is always needed. Previously, only the short-hand version of the
join field was documented. This adds documentation for the long-hand join field data, and
explicitly points out that just specifying the name of the relation for the field value is a
convenience shortcut.
This is a protection mechanism to prevent a single search request from
hitting a large number of shards in the cluster concurrently. If a search is
executed against all indices in the cluster this can easily overload the cluster
causing rejections etc. which is not necessarily desirable. Instead this PR adds
a per request limit of `max_concurrent_shard_requests` that throttles the number of
concurrent initial phase requests to `256` by default. This limit can be increased per request
and protects single search requests from overloading the cluster. Subsequent PRs can introduces
addiontional improvemetns ie. limiting this on a `_msearch` level, making defaults a factor of
the number of nodes or sort shards iters such that we gain the best concurrency across nodes.
This change collapses some of the packages for the bucket aggregations into their parent packages. This was done for the following aggregations:
* The variants of the range aggregation (geo_distance, date and ip) were moved into the `o.e.s.a.bucket.range` package
* The `o.e.s.a.bucket.terms.support` package was removed and the classes were moved to `o.e.s.a.bucket.terms`
* The filter aggregation was moved to `o.e.s.a.bucket.filter`
Since this PR is already relatively large with only the above changes subsequent PRs will do similar operations on relevant metric and pipeline aggregations
Relates to #22868
This commit adds cross-settings validation for the low/high/flood stage
disk watermark settings. This validation was enabled by the introduction
of multiple settings validation.
Relates #25600
The created and found fields in index and delete responses became obsolete after the introduction of the result field in index, update and delete responses (#19566).
After deprecating the created and found fields in 5.x (#19633), now they are removed.
Fixes#19630
* Improved REST endpoint exception handling, see #15335
Also improved OPTIONS http method handling to better conform with the
http spec.
* Tidied up formatting and comments
See #15335
* Tests for #15335
* Cleaned up comments, added section number
* Swapped out tab indents for space indents
* Test class now extends ESSingleNodeTestCase
* Capture RestResponse so it can be examined in test cases
Simple addition to surface the RestResponse object so we can run tests
against it (see issue #15335).
* Refactored class name, included feedback
See #15335.
* Unit test for REST error handling enhancements
Randomizing unit test for enhanced REST response error handling. See
issue #15335 for more details.
* Cleaned up formatting
* New constructor to set HTTP method
Constructor added to support RestController test cases.
* Refactored FakeRestRequest, streamlined test case.
* Cleaned up conflicts
* Tests for #15335
* Added functionality to ignore or include path wildcards
See #15335
* Further enhancements to request handling
Refactored executeHandler to prioritize explicit path matches. See
#15335 for more information.
* Cosmetic fixes
* Refactored method handlers
* Removed redundant import
* Updated integration tests
* Refactoring to address issue #17853
* Cleaned up test assertions
* Fixed edge case if OPTIONS method randomly selected as invalid method
In this test, an OPTIONS method request is valid, and should not return
a 405 error.
* Remove redundant static modifier
* Hook the multiple PathTrie attempts into RestHandler.dispatchRequest
* Add missing space
* Correctly retrieve new handler for each Trie strategy
* Only copy headers to threadcontext once
* Fix test after REST header copying moved higher up
* Restore original params when trying the next trie candidate
* Remove OPTIONS for invalidHttpMethodArray so a 405 is guaranteed in tests
* Re-add the fix I already added and got removed during merge :-/
* Add missing GET method to test
* Add documentation to migration guide about breaking 404 -> 405 changes
* Explain boolean response, pull into local var
* fixup! Explain boolean response, pull into local var
* Encapsulate multiple HTTP methods into PathTrie<MethodHandlers>
* Add PathTrie.retrieveAll where all matching modes can be retrieved
Then TrieMatchingMode can be package private and not leak into RestController
* Include body of error with 405 responses to give hint about valid methods
* Fix missing usageService handler addition
I accidentally removed this :X
* Initialize PathTrieIterator modes with Arrays.asList
* Use "== false" instead of !
* Missing paren :-/
Using the infra that we now have in place, we can convert the low-level REST client docs so that they extract code snippets from real Java classes. This way we make sure that all the snippets properly compile. Compared to the high level REST client docs, in this case we don't run the tests themselves, as that would require depending on test-framework which requires java 8 while the low-level REST client is compatible with java 7. I think that compiling snippets is enough for now.
Today when we run out of disk all kinds of crazy things can happen
and nodes are becoming hard to maintain once out of disk is hit.
While we try to move shards away if we hit watermarks this might not
be possible in many situations. Based on the discussion in #24299
this change monitors disk utilization and adds a flood-stage watermark
that causes all indices that are allocated on a node hitting the flood-stage
mark to be switched read-only (with the option to be deleted). This allows users to react on the low disk
situation while subsequent write requests will be rejected. Users can switch
individual indices read-write once the situation is sorted out. There is no
automatic read-write switch once the node has enough space. This requires
user interaction.
The flood-stage watermark is set to `95%` utilization by default.
Closes#24299
Add an Important admonition for upgrading via the command line
using the Windows MSI Installer. This calls out the need to pass
the same command line options for an upgrade as were used for
the initial installation.
* Adds check for negative search request size
This change adds a check to `SearchSourceBuilder` to throw and exception if the size set on it is set to a negative value.
Closes#22530
* fix error in reindex
* update re-index tests
* Addresses review comment
* Fixed tests
* Added random negative size test
* Fixes test
This commit converts the low level client and high level client chapters into two parts, which allows each high level client supported api to be on a separate page and show up in the index on the right.
This commit adds a note to the docs regarding explicilty setting a
publish host if the network.host setting results in multiple bind
addresses.
Relates #25496
* [DOCS] Update shared attributes for Elasticsearch
* [DOCS] Moved shared attributes to Versions.asciidoc
* [DOCS] More more book URLs to shared attributes
Currently QueryParseContext is only a thin wrapper around an XContentParser that
adds little functionality of its own. I provides helpers for long deprecated
field names which can be removed and two helper methods that can be made static
and moved to other classes. This is a first step in helping to remove
QueryParseContext entirely.
Expand `/_cat/nodes` with already present information about available disk space `diskAvail` (alias: `d`, `disk`) by:
* `diskTotal` (alias `dt`): total disk space
* `diskUsed` (alias `du`): used disk space (`diskTotal - diskAvail`)
* `diskUsedPercent` (alias `dup`): used disk space percentage
Note: The available disk space is the number of bytes available to the node's Java virtual machine. The size might be smaller than the real one. That means the used disk space (percentage) is larger.
Closes#21679
We previously tried to maintain (while not formally supporting) 32-bit
support, although we never tested this anywhere in CI. Since we do not
formally support this, and 32-bit usage is very low, we have elected to
no longer maintain 32-bit support. This commit removes any implication
of 32-bit support.
Relates #25435
Changed `rescore`s to `rescore` requests as an backtick followed by the s character appears to be interpreted as an apostrophe which then leads to an unbalanced backtick for the next code span in the remainder of the paragraph
Closes#25443
This commit removes the default path settings for data and logs. With
this change, we now ship the packages with these settings set in the
elasticsearch.yml configuration file rather than going through the
default.path.data and default.path.logs dance that we went through in
the past.
Relates #25408
This commit removes path.conf as a valid setting and replaces it with a
command-line flag for specifying a non-default path for configuration.
Relates #25392
#25147 added the translog deletion policy but didn't enable it by default. This PR enables a default retention of 512MB (same maximum size of the current translog) and an age of 12 hours (i.e., after 12 hours all translog files will be deleted). This increases to chance to have an ops based recovery, even if the primary flushed or the replica was offline for a few hours.
In order to see which parts of the translog are committed into lucene the translog stats are extended to include information about uncommitted operations.
Views now include all translog ops and guarantee, as before, that those will not go away. Snapshotting a view allows to filter out generations that are not relevant based on a specific sequence number.
Relates to #10708
The `document_type` parameter is no longer required to be specified,
because by default from 6.0 only a single type is allowed. (`index.mapping.single_type` defaults to `true`)
* [Analysis] Parse synonyms with the same analysis chain
Synonym Token Filter / Synonym Graph Filter tokenize synonyms with whatever tokenizer and token filters appear before it in the chain.
Close#7199
* Add MSI installation to documentation
Move installation documentation for Windows with the .zip archive into the zip and tar installation documentation, and clearly indicate any differences for installing on macOS/Linux and Windows.
* Separate out installation with .zip on Windows
With #23997 we have introduced a new internal index option that allows to resolve index expressions only against concrete indices while ignoring aliases. Such index option was applied to IndicesAliasesRequest, so that the index part of alias actions would only be resolved against concrete indices.
Same is done in this commit with delete index request. Deleting aliases has always been confusing as some users expect it to only remove the alias from the index (which has its own specific API). Even worse, in case of filtered aliases, deleting an alias may leave users with the expectation that only the documents that match the filter are deleted, which was never the case. To address all this confusion, delete index api works now only against concrete indices. WIldcard expressions will be only resolved against concrete index, as if aliases didn't exist. If one tries to delete against an alias, an IndexNotFoundException will be thrown regardless of whether the alias exists or not, as a concrete index with such a name doesn't exist.
Closes#2318
If a cluster is configured with an HDFS repository and a node is started, that node must be able
to reach HDFS, or else when it attempts to add the repository from the cluster state at start up
it will fail to connect and the repository will be left in an inconsistent state. Adding a blurb in the
docs to outline the expected availability for HDFS when using the repository plugin.
It adds notes about:
- how preference can help optimize cache usage
- the fact that too many replicas can hurt search performance due to lower
utilization of the filesystem cache
- how index sorting can improve _source compression
- how always putting fields in the same order in documents can improve _source
compression
* Add documentation for the new parent-join field
This commit adds the docs for the new parent-join field.
It explains how to define, index and query this new field.
Relates #20257
UnicodeSetFilter was only allowed in the icu_folding token filter.
It seems useful to expose this setting in icu_normalizer token filter
and char filter.
* Upgrade icu4j for the ICU analysis plugin to 59.1
Lucene upgraded to 59.1 so we should use the same.
Closes#21425
* Add breaking change for the icu upgrade
This snapshot has faster range queries on range fields (LUCENE-7828), more
accurate norms (LUCENE-7730) and the ability to use fake term frequencies
(LUCENE-7854).
Expose the experimental simplepattern and
simplepatternsplit tokenizers in the common
analysis plugin. They provide tokenization based
on regular expressions, using Lucene's
deterministic regex implementation that is usually
faster than Java's and has protections against
creating too-deep stacks during matching.
Both have a not-very-useful default pattern of the
empty string because all tokenizer factories must
be able to be instantiated at index creation time.
They should always be configured by the user
in practice.
Get mappings HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for get
mappings HEAD requests, and just relying on the general mechanism that
exists for handling HEAD requests in the REST layer.
Relates #23192
This commit adds back "id" as the key within a script to specify a
stored script (which with file scripts now gone is no longer ambiguous).
It also adds "source" as a replacement for "code". This is in an attempt
to normalize how scripts are specified across both put stored scripts and script usages, including search template requests. This also deprecates the old inline/stored keys.
This change removes the `postings` highlighter. This highlighter has been removed from Lucene master (7.x) because it behaves
exactly like the `unified` highlighter when index_options is set to `offsets`:
https://issues.apache.org/jira/browse/LUCENE-7815
It also makes the `unified` highlighter the default choice for highlighting a field (if `type` is not provided).
The strategy used internally by this highlighter remain the same as before, it checks `term_vectors` first, then `postings` and ultimately it re-analyzes the text.
Ultimately it rewrites the docs so that the options that the `unified` highlighter cannot handle are clearly marked as such.
There are few features that the `unified` highlighter is not able to handle which is why the other highlighters (`plain` and `fvh`) are still available.
I'll open separate issues for these features and we'll deprecate the `fvh` and `plain` highlighters when full support for these features have been added to the `unified`.
This PR enables Ingest plugins to leverage processor-scoped REST
endpoints. First of which being the Grok endpoint that retrieves
Grok Patterns for users to retrieve all the built-in patterns.
Example usage: Kibana Grok Autocomplete!
The Log4j dependency is separated into two artifacts, the API and the
core implementation. This is to enable replacing Log4j on the backend
through the SLF4J bridge with another logging implementation. For this
reason, the dependencies are marked as optional. This causes confusion
amongst users as to use the bridge, the API should be non-optional since
it is needed for the bridge to function correctly. While they could pull
it into their application directly, it would be clearer if we simply
marked this depdendency as non-optional. Note that this does not mean
that users have to use Log4j for logging in their application, so we are
not marking core as required, it only clarifies what they need to be
able to plug in a different logging implementation.
Relates #25136
This commit refactors the query phase in order to be able
to automatically detect queries that can be early terminated.
If the index sort matches the query sort, the top docs collection is early terminated
on each segment and the computing of the total number of hits that match the query is delegated to a simple TotalHitCountCollector.
This change also adds a new parameter to the search request called `track_total_hits`.
It indicates if the total number of hits that match the query should be tracked.
If false, queries sorted by the index sort will not try to compute this information and
and will limit the collection to the first N documents per segment.
Aggregations are not impacted and will continue to see every document
even when the index sort matches the query sort and `track_total_hits` is false.
Relates #6720
During package install on systemd-based systems, some sysctl settings
should be set (e.g. vm.max_map_count).
In some environments, changing sysctl settings plainly does not work;
previously a global environment variable named
ES_SKIP_SET_KERNEL_PARAMETERS was introduced to skip calling sysctl, but
this causes trouble for:
- configuration management systems, which usually cannot apply an env
var when running a package manager
- package upgrades, which will not have the env var set any more, and
thus leaving the package management system in a bad state (possibly
half-way upgraded, can be very hard to recover)
This removes the env var again and instead of calling systemd-sysctl
manually, tells systemd to restart the wrapper unit - which itself can
be masked by system administrators or management tools if it is known
that sysctl does not work in a given environment.
The restart is not silent on systems in their default configuration, but
is ignored if the unit is masked.
Relates #24234
The index parameter in the update-aliases, put-alias, and delete-alias APIs no longer accepts alias names. Instead, it accepts only index names (or wildcards which will expand to matching indices).
Closes#23960
This removes the parsing of things like `GET /idx/_aliases,_mappings`, instead,
a user must choose between retriving all index metadata with `GET /idx`, or only
a specific form such as `GET /idx/_settings`.
Relates to (and is a prerequisite of) #24437
Some response classes in the java api expose both `getTook()` which returns a `TimeValue` and `getTookInMillis` which returns a `long` value. `getTook()` is enough as one can do `getTook().millis()` to obtain the same result as `getTookInMillis()`, which can be removed.
* Adds nodes usage API to monitor usages of actions
The nodes usage API has 2 main endpoints
/_nodes/usage and /_nodes/{nodeIds}/usage return the usage statistics
for all nodes and the specified node(s) respectively.
At the moment only one type of usage statistics is available, the REST
actions usage. This records the number of times each REST action class is
called and when the nodes usage api is called will return a map of rest
action class name to long representing the number of times each of the action
classes has been called.
Still to do:
* [x] Create usage service to store usage statistics
* [x] Record usage in REST layer
* [x] Add Transport Actions
* [x] Add REST Actions
* [x] Tests
* [x] Documentation
* Rafactors UsageService so counts are done by the handlers
* Fixing up docs tests
* Adds a name to all rest actions
* Addresses review comments
This commit adds a new bg_count field to the REST response of
SignificantTerms aggregations. Similarly to the bg_count that already
exists in significant terms buckets, this new bg_count field is set at
the aggregation level and is populated with the superset size value.
Currently global ordinals are documented under `fielddata`. It moves them to
their own file since they also work with doc values and fielddata is on the way
out.
Closes#23101
By default, the remove plugin CLI command preserves configuration
files. This is so that if a user is upgrading the plugin (which is done
by first removing the old version and then installing the new version)
they do not lose their configuration file. Yet, there are circumstances
where preserving the configuration file is not desired. This commit adds
a purge option to the remove plugin CLI command.
Relates #24981
This commit adds a `doc_count` field to the response body of Matrix
Stats aggregation. It exposes the number of documents involved in
the computation of statistics, a value that can already be retrieved using
the method MatrixStats.getDocCount() in the Java API.
This commit fixes an issue with the plugin docs incorrectly specifying
how to set a custom configuration directory. The correct way is to use
the environment variable CONF_DIR.
* SignificantText aggregation - like significant_terms but doesn’t require fielddata=true, recommended used with `sampler` agg to limit expense of tokenizing docs and takes optional `filter_duplicate_text`:true setting to avoid stats skew from repeated sections of text in search results.
Closes#23674
Adds a "magic" key to the yaml testing stash mostly for use with
documentation tests. When unstashing an object, `$_path` is the
path into the current position in the object you are unstashing.
This means that in docs tests you can use
`// TESTRESPONSEs/somevalue/$body.${_path}/` to mean "replace
`somevalue` with whatever is the response in the same position."
Compare how you must carefully mock out all the numbers in the profile
response without this change:
```
// TESTRESPONSE[s/"id": "\[2aE02wS1R8q_QFnYu6vDVQ\]\[twitter\]\[1\]"/"id": $body.profile.shards.0.id/]
// TESTRESPONSE[s/"rewrite_time": 51443/"rewrite_time": $body.profile.shards.0.searches.0.rewrite_time/]
// TESTRESPONSE[s/"score": 51306/"score": $body.profile.shards.0.searches.0.query.0.breakdown.score/]
// TESTRESPONSE[s/"time_in_nanos": "1873811"/"time_in_nanos": $body.profile.shards.0.searches.0.query.0.time_in_nanos/]
// TESTRESPONSE[s/"build_scorer": 2935582/"build_scorer": $body.profile.shards.0.searches.0.query.0.breakdown.build_scorer/]
// TESTRESPONSE[s/"create_weight": 919297/"create_weight": $body.profile.shards.0.searches.0.query.0.breakdown.create_weight/]
// TESTRESPONSE[s/"next_doc": 53876/"next_doc": $body.profile.shards.0.searches.0.query.0.breakdown.next_doc/]
// TESTRESPONSE[s/"time_in_nanos": "391943"/"time_in_nanos": $body.profile.shards.0.searches.0.query.0.children.0.time_in_nanos/]
// TESTRESPONSE[s/"score": 28776/"score": $body.profile.shards.0.searches.0.query.0.children.0.breakdown.score/]
// TESTRESPONSE[s/"build_scorer": 784451/"build_scorer": $body.profile.shards.0.searches.0.query.0.children.0.breakdown.build_scorer/]
// TESTRESPONSE[s/"create_weight": 1669564/"create_weight": $body.profile.shards.0.searches.0.query.0.children.0.breakdown.create_weight/]
// TESTRESPONSE[s/"next_doc": 10111/"next_doc": $body.profile.shards.0.searches.0.query.0.children.0.breakdown.next_doc/]
// TESTRESPONSE[s/"time_in_nanos": "210682"/"time_in_nanos": $body.profile.shards.0.searches.0.query.0.children.1.time_in_nanos/]
// TESTRESPONSE[s/"score": 4552/"score": $body.profile.shards.0.searches.0.query.0.children.1.breakdown.score/]
// TESTRESPONSE[s/"build_scorer": 42602/"build_scorer": $body.profile.shards.0.searches.0.query.0.children.1.breakdown.build_scorer/]
// TESTRESPONSE[s/"create_weight": 89323/"create_weight": $body.profile.shards.0.searches.0.query.0.children.1.breakdown.create_weight/]
// TESTRESPONSE[s/"next_doc": 2852/"next_doc": $body.profile.shards.0.searches.0.query.0.children.1.breakdown.next_doc/]
// TESTRESPONSE[s/"time_in_nanos": "304311"/"time_in_nanos": $body.profile.shards.0.searches.0.collector.0.time_in_nanos/]
// TESTRESPONSE[s/"time_in_nanos": "32273"/"time_in_nanos": $body.profile.shards.0.searches.0.collector.0.children.0.time_in_nanos/]
```
To how you can cavalierly mock all the numbers at once with this change:
```
// TESTRESPONSE[s/(?<=[" ])\d+(\.\d+)?/$body.$_path/]
```
Currently a `delete document` request against a non-existing index actually **creates** this index.
With this change the `delete document` no longer creates the previously non-existing index and throws an `index_not_found` exception instead.
However as discussed in https://github.com/elastic/elasticsearch/pull/15451#issuecomment-165772026, if an external version is explicitly used, the current behavior is preserved and the index is still created and the document is marked for deletion.
Fixes#15425
Native scripts have been replaced in documentation by implementing
a ScriptEngine and they were deprecated in 5.5.0. This commit
removes the native script infrastructure for 6.0.
closes#19966
This commit adds gcs credential settings to the elasticsearch keystore.
The setting name follows the same pattern as the s3 client settings,
beginning with `gcs.client.`, followed by the client name, and then the
setting name, in this case, `credentials_file`. Using the legacy service
file setting is also deprecated.
This PR adds a new thread pool type: `fixed_auto_queue_size`. This thread pool
behaves like a regular `fixed` threadpool, except that every
`auto_queue_frame_size` operations (default: 10,000) in the thread pool,
[Little's Law](https://en.wikipedia.org/wiki/Little's_law) is calculated and
used to adjust the pool's `queue_size` either up or down by 50. A minimum and
maximum is taken into account also. When the min and max are the same value, a
regular fixed executor is used instead.
The `SEARCH` threadpool is changed to use this new type of thread pool. However,
the min and max are both set to 1000, meaning auto adjustment is opt-in rather
than opt-out.
Resolves#3890
In scripts (at least some of the languages), the terms dictionary and
postings can be access with the special _index variable. This is for
very advanced use cases which want to do their own scoring. The problem
is segment level statistics must be recomputed for every document.
Additionally, this is not friendly to the terms index caching as the
order of looking up terms should be controlled by lucene.
This change removes _index from scripts. Anyone using it can and should
instead write a Similarity plugin, which is explicitly designed to allow
doing the calculations needed for a relevance score.
closes#19359
Today when an index is `read-only` the index is also blocked from
being deleted which sometimes is undesired since in-order to make
changes to a cluster indices must be deleted to free up space. This is
a likely scenario in a hosted environment when disk-space is limited to switch
indices read-only but allow deletions to free up space.
Our strong recommendation is disabling swap over any other alternative
to avoid the JVM from landing on disk. This commit clarifies the docs in
this regard.
* Add parent-join module
This change adds a new module named `parent-join`.
The goal of this module is to provide a replacement for the `_parent` field but as a first step this change only moves the `has_child`, `has_parent` queries and the `children` aggregation to this module.
These queries and aggregations are no longer in core but they are deployed by default as a module.
Relates #20257
This commit documents how to write a `ScriptEngine` in order to use
expert internal apis, such as using Lucene directly to find index term
statistics. These documents prepare the way to remove both native
scripts and IndexLookup.
The example java code is actually compiled and tested under a new gradle
subproject for example plugins. This change does not yet breakup
jvm-example into the new examples dir, which should be done separately.
relates #19359
relates #19966
This commit adds support for histogram and date_histogram agg compound order by refactoring and reusing terms agg order code. The major change is that the Terms.Order and Histogram.Order classes have been replaced/refactored into a new class BucketOrder. This is a breaking change for the Java Transport API. For backward compatibility with previous ES versions the (date)histogram compound order will use the first order. Also the _term and _time aggregation order keys have been deprecated; replaced by _key.
Relates to #20003: now that all these aggregations use the same order code, it should be easier to move validation to parse time (as a follow up PR).
Relates to #14771: histogram and date_histogram aggregation order will now be validated at reduce time.
Closes#23613: if a single BucketOrder that is not a tie-breaker is added with the Java Transport API, it will be converted into a CompoundOrder with a tie-breaker.
Currently, the get snapshots API (e.g. /_snapshot/{repositoryName}/_all)
provides information about snapshots in the repository, including the
snapshot state, number of shards snapshotted, failures, etc. In order
to provide information about each snapshot in the repository, the call
must read the snapshot metadata blob (`snap-{snapshot_uuid}.dat`) for
every snapshot. In cloud-based repositories, this can be expensive,
both from a cost and performance perspective. Sometimes, all the user
wants is to retrieve all the names/uuids of each snapshot, and the
indices that went into each snapshot, without any of the other status
information about the snapshot. This minimal information can be
retrieved from the repository index blob (`index-N`) without needing to
read each snapshot metadata blob.
This commit enhances the get snapshots API with an optional `verbose`
parameter. If `verbose` is set to false on the request, then the get
snapshots API will only retrieve the minimal information about each
snapshot (the name, uuid, and indices in the snapshot), and only read
this information from the repository index blob, thereby giving users
the option to retrieve the snapshots in a repository in a more
cost-effective and efficient manner.
Closes#24288
Adds a new "icu_collation" field type that exposes lucene's
ICUCollationDocValuesField. ICUCollationDocValuesField is the replacement
for ICUCollationKeyFilter which has been deprecated since Lucene 5.
Now that indices have a single type by default, we can move to the next step
and identify documents using their `_id` rather than the `_uid`.
One notable change in this commit is that I made deletions implicitly create
types. This helps with the live version map in the case that documents are
deleted before the first type is introduced. Otherwise there would be no way
to differenciate `DELETE index/foo/1` followed by `PUT index/foo/1` from
`DELETE index/bar/1` followed by `PUT index/foo/1`, even though those are
different if versioning is involved.
This commit adds support for indexing and searching a new ip_range field type. Both IPv4 and IPv6 formats are supported. Tests are updated and docs are added.
`_search_shards`API today only returns aliases names if there is an alias
filter associated with one of them. Now it can be useful to see which aliases
have been expanded for an index given the index expressions. This change also includes non-filtering aliases even without a filtering alias being present.
Adds CONSOLE to cross-cluster-search docs but skips them for testing
because we don't have a second cluster set up. This gets us the
`VIEW IN CONSOLE` and `COPY AS CURL` links and makes sure that they
are valid yaml (not json, technically) but doesn't get testing.
Which is better than we had before.
Adds CONSOLE to the dynamic templates docs and ingest-node docs.
The ingest-node docs contain a *ton* of non-console snippets. We
might want to convert them to full examples later, but that can be
a separate thing.
Relates to #18160
I originally wrote this file when we first added snippets testing
and a lot has changed. We've grown quite fond of the
`// TESTRESPONSE[s/foo/bar/]` construct, for example, but the docs
discouraged its use.
Relates to #18160
Rewrites most of the snippets in the `innert_hits` docs to be
complete examples and enables `VIEW IN CONSOLE`, `COPY AS CURL`,
and automatic testing of the snippets.
Today we go to heroic lengths to workaround bugs in the JDK or around
issues like BSD jails to get information about the underlying file
store. For example, we went to lengths to work around a JDK bug where
the file store returned would incorrectly report whether or not a path
is writable in certain situations in Windows operating
systems. Another bug prevented getting file store information on
Windows on a virtual drive on Windows. We no longer need to work
around these bugs, we could simply try to write to disk and let an I/O
exception arise if we could not write to the disk or take advantage of
the fact that these bugs are fixed in recent releases of the JDK
(e.g., the file store bug is fixed since 8u72). Additionally, we
collected information about all file stores on the system which meant
that if the user had a stale NFS mount, Elasticsearch could hang and
fail on startup if that mount point was not available. Finally, we
collected information through Lucene about whether or not a disk was a
spinning disk versus an SSD, information that we do not need since we
assume SSDs by default. This commit takes into consideration that we
simply do not need this heroic effort, we do not need information
about all file stores, and we do not need information about whether or
not a disk spins to greatly simplfy file store handling.
Relates #24402
Added missing permissions required for authenticating with Kerberos to HDFS. Also implemented
code to support authentication in the form of using a Kerberos keytab file. In order to support
HDFS authentication, users must install a Kerberos keytab file on each node and transfer it to the
configuration directory. When a user specifies a Kerberos principal in the repository settings the
plugin automatically enables security for Hadoop and begins the login process. There will be a
separate PR and commit for the testing infrastructure to support these changes.
Open/Close index api have allow_no_indices set to false by default, while delete index has it set to true. The flag controls where a wildcard expression that matches no indices will be ignored or an error will be thrown instead. This commit aligns open/close default behaviour to that of delete index.
Add info about the base image used and the github repo of
elasticsearch-docker.
Clarify that setting `memlock=-1:-1` is only a requirement when
`bootstrap_memory_lock=true` and the alternatives we document
elsewhere in docs for disabling swap are valid for Docker as well.
Additionally, with latest versions of docker-ce shipping with
unlimited (or high enough) defaults for `nofile` and `nproc`, clarify
that explicitly setting those per ES container is not required, unless
they are not defined in the Docker daemon.
Finally simplify production `docker-compose.yml` example by removing
unneeded options.
Relates #24389
This change makes the request builder code-path same as `Client#execute`. The request builder used to return a `ListenableActionFuture` when calling execute, which allows to associate listeners with the returned future. For async execution though it is recommended to use the `execute` method that accepts an `ActionListener`, like users would do when using `Client#execute`.
Relates to #24412
Relates to #9201
We've had `QueryDSLDocumentationTests` for a while but it had a very
hopeful comment at the top about how we want to make sure that the
example in the query-dsl docs match up with the test but we never
had anything that made *sure* that they did. This changes that!
Now the examples from the query-dsl docs are all built from the
`QueryDSLDocumentationTests`. All except for the percolator example
because that is hard to do as it stands now.
To make this easier this change moves `QueryDSLDocumentationTests`
from core and into the high level rest client. This is useful for
two reasons:
1. We expect the high level rest client to be able to use the builders.
2. The code that builds that docs doesn't check out all of
Elasticsearch. It only checks out certain directories. Since we're
already including snippets from that directory we don't have to
make any changes to that process.
Closes#24320
The _cat/shards docs asserted that one of the columns looked like
a propery byte size but used a regex like `\d+\.\d+.*` which doesn't
match `0b` which is a possible value. Instead this uses
`\d(\.\d+)?[kmg]?b`.
The response is attempting to illustrate the sync_id marker, but in
the test the index is too "fresh" to have a sync marker. So the test
needs to execute a sync flush behind the scenes so that the marker
is present
Currently we don't write the count value to the geo_centroid aggregation rest response,
but it is provided via the java api and the count() method in the GeoCentroid interface.
We should add this parameter to the rest output and also provide it via the getProperty()
method.
The alias parameter was documented as a list in our rest-spec, yet only the first value out of a list was getting read and processed. This commit adds support for multiple aliases to _cat/aliases
Closes#23661
lcawley
Michael Basnight
Boaz Leskes
Bernd
Christoph Büscher
Daniel A. Ochoa
Jim Ferenczi
Tanguy Leroux
David Pilato
Russ Cam
Ryan Ernst
jiangzhuolin
Lee Hinman
Martijn van Groningen
marcocova
shaulzorea
Jason Tedor
Lee Hinman
Alexander Reelsen
Matt Weber
Colin Goodheart-Smithe
Luca Cavanna
debadair
Christoph Wurm
Jim Ferenczi
Atothendrew
Antonio Matarrese
michaelbaamonde
Nik Everett
Glen Smith
R Tsien
Berg Lloyd-Haig
Zachary Tong
dlindeque
hanbj
Andy Bristol
Daniel Mitterdorfer
Ian Fisk
markwalkom
Adrien Grand
Tal Levy
Zachary Tong
Aron Szanto
javanna
propulkit
Clinton Gormley
Jack Conradson
Jay Modi
Simon Willnauer
Bodecker DellaMaria
Neil Rickards
James Baiera
Herman Schaaf
DeDe Morton
olcbean
Viral-Inc
Wesley Merkel
Jun Ohtani
Andreas Gebhardt
Robin Clarke
Marcus Wittig
Alexander Kazakov
dkimdon
Nathan Taylor
David Causse
Spencer
Sergey Novikov
Pandiyan Murugan
Sanne Grinovero
Andrey Groshev
Guillaume Le Floch
Christian Hofstaedtler
Yibin Lin
David Cho-Lerat
propulkit
Brian Lesperance
markharwood
António Ribeiro
archana
Kristen
Oleksandr Chychkan
Jack Conradson
Luis Majano
Daniel Mitterdorfer
Vlad Holubiev
qwerty4030
Chris Ivens
Ali Beyad
Suhas Karanth
Anupam
Nicholas Knize
Dimitrios Liappis