Today we configure the soft-deletes field iff soft-deletes enabled.
Although this choice was correct, it prevents an engine with
soft-deletes disabled from opening a Lucene index with soft-deletes.
Moreover, this change should not have any side-effect if a Lucene index
does not have any soft-deletes.
Relates #36141
This commit implements proper metadata recovery for Zen2.
GatewayService is responsible for the recovery. In Zen1 GatewayService
creates an instance of Gateway, that is used to reach out to other cluster
nodes, get their state and calculate the most up-to-date state based on
versions. After that Gateway performs upgrade and archival of
ClusterSettings and closes bad indices. Then recovered state is passed to GatewayService.GatewayRecoveryListener that mixes up current state
and restored state, removes state not recovered block, creates the
routing table and performs re-routing.
In Zen2 we should perform this kind of logic on cluster startup, except
mixing state (because there is nothing to mix) and opening routing table.
This commit refactors out all `ClusterUpdate` functions in a separate class
`ClusterStateUpdaters`, which is used by `Gateway` and `GatewayService`
in case of Zen1, and by `GatewayMetaState` and `GatewayService` in case of
Zen2.
This commit also switches all integration tests that are already using Zen2 from
InMemoryPersistedState to GatewayMetaState.
This test suite can stop all the shared master-eligible nodes, which breaks the
cluster since any non-shared master-eligible nodes are stopped first in the
reset process between tests.
Since this test suite can leave the cluster in this somewhat broken state, it
seems best that it uses a new cluster for each test.
When building a query Lucene distinguishes two cases, queries that require to produce a score and queries that only need to match. We cloned this mechanism in the QueryBuilders in order to be able to produce different queries based on whether they need to produce a score or not. However the only case in es that require this distinction is the BoolQueryBuilder that sets a different minimum_should_match when a `bool` query is built in a filter context..
This behavior doesn't seem right because it makes the matching of `should` clauses different when the score is not required.
Closes#35293
This fixes a failure of InternalTestClusterTests#testBeforeTest which checks
that the cluster is set up the same when starting from the same seed. Trappily,
using ESTestCase#randomIntBetween() is no good, we have to use
InternalTestCluster#random via RandomNumbers#randomIntBetween() instead.
Today, we allow all nodes in an integration test to bootstrap. However this
seems to lead to test failures due to post-election instability. The change
avoids this instability by only bootstrapping a single node in the cluster.
Empty buckets don't need to be added when performing an incremental reduction step, they can be added later in the final reduction step. This will allow us to later remove the max buckets limit when performing non final reduction.
This is a follow-up to #35144. That commit made the underlying
connection opening process in TcpTransport asynchronous. However the
method still blocked on the process being complete before returning.
This commit moves the blocking to the ConnectionManager level. This is
another step towards the top-level TransportService api being async.
This commit removes the `MockTcpTransport` as a transport option for
`ESIntegTestCase`. It is the first step in replacing the usages of
`MockTcpTransport` with `MockNioTransport`.
CompositeBytesReference#slice has two bugs:
- One that makes it fail if the reference is empty and an empty slice is
created, this is #35950 and is fixed by special-casing empty-slices.
- One performance bug that makes it always create a composite slice when
creating a slice that ends on a boundary, this is fixed by computing `limit`
as the index of the sub reference that holds the last element rather than
the next element after the slice.
Closes#35950
This is related to #34405 and a follow-up to #34753. It makes a number
of changes to our current keepalive pings.
The ping interval configuration is moved to the ConnectionProfile.
The server channel now responds to pings. This makes the keepalive
pings bidirectional.
On the client-side, the pings can now be optimized away. What this
means is that if the channel has received a message or sent a message
since the last pinging round, the ping is not sent for this round.
When wiping rollup jobs, if we are in a mixed cluster with < v7.0 nodes
we need to fall back to the deprecated endpoint because we may talk
to a 6.x node.
Today the default for USE_ZEN2 is false and it is overridden in many places. By
defaulting it to true we can be sure that the only places in which Zen2 does
not work are those in which it is explicitly set to false.
This commit removes the dedicated `setSoLinger` method. This simplifies
the `TcpChannel` interface. This method has very little effect as the
SO_LINGER is not set prior to the channels being closed in the abstract
transport test case. We still will set SO_LINGER on the
`MockNioTransport`. However we can do this manually.
Today GatewayMetaState is capable of atomically storing MetaData to
disk. We've also moved fields that are needed to be persisted in Zen2
from ClusterState to ClusterState.MetaData.CoordinationMetaData.
This commit implements PersistedState interface.
version and currentTerm are persisted as a part of Manifest.
GatewayMetaState now implements both ClusterStateApplier and
PersistedState interfaces. We started with two descendants
Zen1GatewayMetaState and Zen2GatewayMetaState, but it turned
out to be not easy to glue it.
GatewayMetaState now constructs previousClusterState (including
MetaData) and previousManifest inside the constructor so that all
PersistedState methods are usable as soon as GatewayMetaState
instance is constructed. Also, loadMetaData is renamed to
getMetaData, because it just returns
previousClusterState.metaData().
Sadly, we don't have access to localNode (obtained from
TransportService in the constructor, so getLastAcceptedState
should be called, after setLocalNode method is invoked.
Currently, when deciding whether to write IndexMetaData to disk,
we're comparing current IndexMetaData version and received
IndexMetaData version. This is not safe in Zen2 if the term has changed.
So updateClusterState now accepts incremental write
method parameter. When it's set to false, we always write
IndexMetaData to disk.
Things that are not covered by GatewayMetaStateTests are covered
by GatewayMetaStatePersistedStateTests.
This commit also adds an option to use GatewayMetaState instead of
InMemoryPersistedState in TestZenDiscovery. However, by default
InMemoryPersistedState is used and only one test in PersistedStateIT
used GatewayMetaState. In order to use it for other tests, proper
state recovery should be implemented.
Today we have a way to atomically persist global MetaData and
IndexMetaData to disk when new ClusterState is received. All other
ClusterState fields are not persisted.
However, there are other parts of ClusterState that should be
persisted, namely:
version
term
lastCommittedConfiguration
lastAcceptedConfiguration
votingTombstones
version is changed frequently, other fields are not. We decided
to group term, lastCommittedConfiguration,
lastAcceptedConfiguration and votingTombstones into
CoordinationMetaData class and make CoordinationMetaData a field
inside MetaData.
MetaData.toXContent and MetaData.fromXContent should take care of
CoordinationMetaData.
version stays as a top level field in ClusterState and will be
persisted as part of Manifest in a follow-up commit.
Also MetaData.isGlobalStateEquals should be extended to include
coordinationMetaData in comparison.
This commit favors exposing getters, such as getTerm directly in
ClusterState to avoid massive code changes.
An example of CoordinationMetaState.toXContent:
{
"term": 1,
"last_committed_config": [
"TiIuBcbBtpuXyDDVHXeD",
"ZIAoVbkjjLPLUuYLaTkw"
],
"last_accepted_config": [
"OwkXbXZNOZPJqccdFHdz",
"LouzsGYwmQzpeQMrboZe",
"fCKGRZdjLTqzXAqPUtGL",
"pLoxshjpJXwDhbgjfYJy",
"SjINLwFIlIEFZCbjrSFo",
"MDkVncJEVyZLJktopWje"
]
}
- Moves disruption tests to Zen2
- Registers a few missing settings
- Removes .put(TestZenDiscovery.USE_ZEN2.getKey(), true) from tests where Zen2 is now enabled
by default through the parent test class
- Moves QuorumGatewayIT back to Zen1, as it is not stable with Zen2 as it currently relies on
dangling indices due to the lack of proper CS persistence, which triggers secondary failures
This commit adds a rest endpoint for freezing and unfreezing an index.
Among other cleanups mainly fixing an issue accessing package private APIs
from a plugin that got caught by integration tests this change also adds
documentation for frozen indices.
Note: frozen indices are marked as `beta` and available as a basic feature.
Relates to #34352
Zen2 is now feature-complete enough to run most ESIntegTestCase tests. The changes in this PR
are as follows:
- ClusterSettingsIT is adapted to not be Zen1 specific anymore (it was using Zen1 settings).
- Some of the integration tests require persistent storage of the cluster state, which is not fully
implemented yet (see #33958). These tests keep running with Zen1 for now but will be switched
over as soon as that is fully implemented.
- Some very few integration tests are not running yet with Zen2 for other reasons, depending on
some of the other open points in #32006.
Removed extending of AbstractComponent and changed logger usage to
explicit declaration. Abstract classes still have logger
declaration using this.getClass() in order to show implementation class
name in its logs.
See #34488
This changes the test to not use a `CountDownlatch`, instead adding an assertion
for the final logging message and waiting until the `MockAppender` has seen it
before proceeding.
Resolves#23739
Today, the bootstrapping of a Zen2 cluster is driven externally, requiring
something else to wait for discovery to converge and then to inject the initial
configuration. This is hard to use in some situations, such as REST tests.
This change introduces the `ClusterBootstrapService` which brings the bootstrap
retry logic within each node and allows it to be controlled via an (unsafe)
node setting.
This pull request replaces some blocks of code that must be run once
and that are currently based on AtomicBoolean by the convient RunOnce
class added in #35489.
Refactors and simplifies the logic around stopping nodes, making sure that for a full cluster restart
onNodeStopped is only called after the nodes are actually all stopped (and in particular not while
starting up some nodes again). This change also ensures that a closed node client is not being used
anymore (which required a small change to a test).
Relates to #35049
This adds a `wait_for_completion` flag which allows the user to block
the Stop API until the task has actually moved to a stopped state,
instead of returning immediately. If the flag is set, a `timeout` parameter
can be specified to determine how long (at max) to block the API
call. If unspecified, the timeout is 30s.
If the timeout is exceeded before the job moves to STOPPED, a
timeout exception is thrown. Note: this is just signifying that the API
call itself timed out. The job will remain in STOPPING and evenutally
flip over to STOPPED in the background.
If the user asks the API to block, we move over the the generic
threadpool so that we don't hold up a networking thread.
If shutting down half or more of the master-eligible nodes, their votes must
first be explicitly withdrawn to ensure that the cluster doesn't lose its
quorum. This works via _voting tombstones_, stored in the cluster state, which
tell the reconfigurator to remove nodes from the voting configuration.
This change introduces voting tombstones to the cluster state, together with
transport APIs for adding and removing them, and makes use of these APIs in
`InternalTestCluster` to support tests which remove at least half of the
master-eligible nodes at once (e.g. shrinking from two master-eligible nodes to
one).
AbstractComponent was deprecated in #35140 and is looking like it will be
removed at some point by #34888. Today all it does is provide a logger. This
change removes the usages of AbstractComponent that live solely in the zen2
feature branch to avoid some future merge pain, and replaces it where necessary
with some directly-created loggers.
The MockTcpTransport is not friendly in regards to memory usage. It must
allocate multiple byte arrays for every message. This improves the
memory situation by failing fast if the message is improperly formatted.
Additionally, it uses reusable big arrays for at least half of the
allocated byte arrays.
This change adds a logger for the query and fetch phases that prints all requests
before their execution at the trace level. This will help debugging cases where an issue
occurs during the execution since only completed queries are logged by the slow logs.
This is related to #34483. It introduces a namespaced setting for
compression that allows users to configure compression on a per remote
cluster basis. The transport.tcp.compress remains as a fallback
setting. If transport.tcp.compress is set to true, then all requests
and responses are compressed. If it is set to false, only requests to
clusters based on the cluster.remote.cluster_name.transport.compress
setting are compressed. However, after this change regardless of any
local settings, responses will be compressed if the request that is
received was compressed.
Enables diff-based publishing, which is an optimization where only the changing parts of the cluster
state are published to the nodes in the cluster, falling back to full cluster state publishing if the
receiver does not have the previous cluster state.
- Introduces a transport API for bootstrapping a Zen2 cluster
- Introduces a transport API for requesting the set of nodes that a
master-eligible node has discovered and for waiting until this comprises the
expected number of nodes.
- Alters ESIntegTestCase to use these APIs when forming a cluster, rather than
injecting the initial configuration directly.
This change adds a `frozen` engine that allows lazily open a directory reader
on a read-only shard. The engine wraps general purpose searchers in a LazyDirectoryReader
that also allows to release and reset the underlying index readers after any and before
secondary search phases.
Relates to #34352
With this change, `Version` no longer carries information about the qualifier,
we still need a way to show the "display version" that does have both
qualifier and snapshot. This is now stored by the build and red from `META-INF`.
This is related to #29023. Additionally at other points we have
discussed a preference for removing the need to unnecessarily block
threads for opening new node connections. This commit lays the groudwork
for this by opening connections asynchronously at the transport level.
We still block, however, this work will make it possible to eventually
remove all blocking on new connections out of the TransportService
and Transport.
Today we allow the user to set the minimum size of a voting configuration. On
reflection we would rather this was simply '3' where possible, and we can use
the retirement API to control the removal of nodes more explicitly.
This change replaces the old reconfigurator setting with a new one,
`cluster.auto_shrink_voting_configuration`, which determines whether
Elasticsearch should automatically remove nodes from the voting configuration
or not.
When the engine is asked for historical operations, we check if some of the requested operations
are not yet refreshed and if so we refresh before returning the operations. The refresh check is
based on capturing the local checkpoint before each refresh and comparing that value to the one
requested when `newChangesSnapshot` was called. If the requested range is above the captured
local checkpoint we issue a refresh.
This can currently cause unneeded extra refreshes if the method is called concurrently which may cause unwanted degradation in indexing performance. This is especially relevant for CCR where we always ask for a range below the global checkpoint. That range is guaranteed to be below the local
checkpoint of the shard and one refresh is enough to serve multiple changes requests.
This commit fixes this by introducing a dedicated mutex to make sure the test for whether a refresh
is needed actually wait for concurrents for concurrent refreshes that were caused by another
change refresh.
Note that this is not a big change in semantics as refreshes are serialized by lucene anyway. I also
opted not to keep the synchronization to the changes snapshot request only even if in theory we
can apply it to all refreshes, not matter where they come from.
Currently we create a new netty event loop group for client connections
and all server profiles. Each new group creates new threads for io
processing. This means 2 * num of processors new threads for each group.
A single group should be able to handle all io processing (for the
transports). This also brings the netty module inline with what we do
for nio.
Additionally, this PR renames the worker threads to be the same for
netty and nio.
* Introduce property to set version qualifier
- VersionProperties.elasticsearch is now a string which can have qualifier
and snapshot too
- The Version class in the build no longer cares about snapshot and
qualifier.
Stop passing `Settings` to `AbstractComponent`'s ctor. This allows us to
stop passing around `Settings` in a *ton* of places. While this change
touches many files, it touches them all in fairly small, mechanical
ways, doing a few things per file:
1. Drop the `super(settings);` line on everything that extends
`AbstractComponent`.
2. Drop the `settings` argument to the ctor if it is no longer used.
3. If the file doesn't use `logger` then drop `extends
AbstractComponent` from it.
4. Clean up all compilation failure caused by the `settings` removal
and drop any now unused `settings` isntances and method arguments.
I've intentionally *not* removed the `settings` argument from a few
files:
1. TransportAction
2. AbstractLifecycleComponent
3. BaseRestHandler
These files don't *need* `settings` either, but this change is large
enough as is.
Relates to #34488
* NETWORKING: MockTransportService Wait for Close
* Make `MockTransportService` wait `30s` for close listeners to run before failing the assertion
* Closes#34990
Today when ESIntegTestCase starts some nodes it writes out the unicast hosts
files each time a node starts its transport service. This does mean that a
number of nodes can start and perform their first pinging round without any
unicast hosts which, if the timing is unlucky and a lot of nodes are all
started at the same time, can lead to a split brain as in #35052.
Prior to #33554 this was unlikely to happen since the MockUncasedHostsProvider
would always have yielded the existing hosts, so the timing would have to have
been implausibly unlucky. Since #33554, however, it's more likely because the
race occurs between the start of the first round of pinging and the writing of
the unicast hosts file. It is realistic that new nodes will be configured with
the existing nodes from startup, so this change reinstates that behaviour.
Closes#35052.
The java yaml test runner supports sending request headers, yet not all clients support headers. This commit makes sure that we enforce adding a skip section with feature "headers" whenever headers are used in a do section as part of a test. That decreases the chance for new tests to break client builds due to the missing skip section.
Closes#34650
This PR renames the CRUD APIS for ILM
GET _ilm/<policy>, _ilm -> _ilm/policy/<policy>, _ilm/policy
PUT _ilm/<policy> -> _ilm/policy/<policy>
DELETE _ilm/<policy> -> _ilm/policy/<policy>
closes#34929.
Drops the `Settings` member from `AbstractComponent`, moving it from the
base class on to the classes that use it. For the most part this is a
mechanical change that doesn't drop `Settings` accesses. The one
exception to this is naming threads where it switches from an invocation
that passes `Settings` and extracts the node name to one that explicitly
passes the node name.
This change doesn't drop the `Settings` argument from
`AbstractComponent`'s ctor because this change is big enough as is.
We'll do that in a follow up change.
This commit filters out usage of deprecated tzs by tests. These are
tested separately and should not require checking for warnings on any
test using random timezones.
closes#34188
Validation of test sections and suites consists of checking that the proper skip features sections are in place depending on the features used in tests.
The validation logic was previously only performed on do sections included in each test section, and the skip needed to be present in the same test section. What happens often though is that the skip is added to the setup section, or the teardown section.
This commit improves the validation of test suites by validating setup and teardown section first, then looking at each test section while still eventually reading the skip section from setup or teardown.
We are also making SkipSection, SetupSection, TearDownSection, ClientYamlTestSection and ClientYamlTestSuite immutable. Previously it was possible to utilize constants like SetupSection.EMPTY, which were modifiable and affect every other future users by modifiying them. This has been corrected.
Also, validation has been improved to cumulate errors so that all the errors from a suite will be listed at once.
Relates to #34735
This commit adds a new single value metric aggregation that calculates
the statistic called median absolute deviation, which is a measure of
variability that works on more types of data than standard deviation
Our calculation of MAD is approximated using t-digests. In the collect
phase, we collect each value visited into a t-digest. In the reduce
phase, we merge all value t-digests, then create a t-digest of
deviations using the first t-digest's median and centroids
Conflicts during the merge:
1. >=140 chars line length fixed for a lot of project files and warnings
for those files are no longer suppressed
2. Node name is removed from AbstractComponent, it’s no longer taken
from settings, but is explicitly passed as constructor argument and
there were quite a few new classes on zen2 branch that require this
change
3. TransportResponseHandler interface changed (new method added) and
Zen2 makes a lot of subclasses in tests
4. Deprecated way of obtaining logger was changed
Bulk Request in High level rest client should be consistent with what is
possible in Rest API, therefore should support global parameters. Global
parameters are passed in URL in Rest API.
Some parameters are mandatory - index, type - and would fail validation
if not provided before before the bulk is executed.
Optional parameters - routing, pipeline.
The usage of these should be consistent across sync/async execution,
bulk processor and BulkRequestBuilder
closes#26026
`AbstractComponent` is trouble because its name implies that
*everything* should extend from it. It *is* useful, but maybe too
broadly useful. The things it offers access too, the `Settings` instance
for the entire server and a logger are nice to have around, but not
really needed *everywhere*. The `Settings` instance especially adds a
fair bit of ceremony to testing without any value.
This removes the `nodeName` method from `AbstractComponent` so it is
more clear where we actually need the node name.
In order to remove Streamable from the codebase, Response objects need
to be read using the Writeable.Reader interface which this change
enables. This change enables the use of Writeable.Reader by adding the
`Action#getResponseReader` method. The default implementation simply
uses the existing `newResponse` method and the readFrom method. As
responses are migrated to the Writeable.Reader interface, Action
classes can be updated to throw an UnsupportedOperationException when
`newResponse` is called and override the `getResponseReader` method.
Relates #34389
This is a forward port of a change made to clean up backwards
compatibility for the rollup cleanups. It makes the version of each node
available very early on in test execution. The 6.x version of the change
used those versions to control the cleanup backwards compatibility but
that isn't needed in this branch. But having the versions around *is*
useful. So this makes them available.
Closes#34629
This is related to #30876. The AbstractSimpleTransportTestCase initiates
many tcp connections. There are normally over 1,000 connections in
TIME_WAIT at the end of the test. This is because every test opens at
least two different transports that connect to each other with 13
channel connection profiles. This commit modifies the default
connection profile used by this test to 6. One connection for each
type, except for REG which gets 2 connections.
The contains syntax was added in #30874 but the skips were not properly
put in place.
The java runner has the feature so the tests will run as part of the
build, but language clients will be able to support it at their own
pace.
We throw parsing exception when an unknown array is found, but we don't when an unknown top-level field is found. This commit makes sure that unsupported top-level fields are not ignored in a do section.
Closes#34651
#33708 introduced a strict deprecation mode that makes a REST request
fail if there is a warning header in the response returned by
Elasticsearch (usually a deprecation message signaling that a feature
or a field has been deprecated).
This change adds the strict deprecation mode into the REST integration
tests, and makes the tests fail if a deprecated feature is used. Also
any test using a deprecated feature has been modified to pass the build.
The YAML integration tests already analyzed HTTP warnings so they do
not use this mode, keeping their "expected vs actual" behavior.
In #34407, we supposed to clone the list of replicas of ReplicationGroup
when computing replication targets, but somehow we missed it. If we
don't clone the list, a WriteReplicationAction may use an old
ReplicationTargets which consists replicas which are removed from the
current list of replicas
Relates #34407Closes#33457
- Restrict visibility of Aggregators and Factories
- Move PipelineAggregatorBuilders up a level so it is consistent with
AggregatorBuilders
- Checkstyle line length fixes for a few classes
- Minor odds/ends (swapping to method references, formatting, etc)
We should delete a job by directly talking to the allocated
task and telling it to shutdown. Today we shut down a job
via the persistent task framework. This is not ideal because,
while the job has been removed from the persistent task
CS, the allocated task continues to live until it gets the
shutdown message.
This means a user can delete a job, immediately delete
the rollup index, and then see new documents appear in
the just-deleted index. This happens because the indexer
in the allocated task is still running and indexes a few
more documents before getting the shutdown command.
In this PR, the transport action is changed to a TransportTasksAction,
and we invoke onCancelled() directly on the matching job.
The race condition still exists after this PR (albeit less likely),
but this was a precursor to fixing the issue and a self-contained
chunk of code. A second PR will followup to fix the race itself.
Integrates the failure detectors with the Connection lifecycle, to fail nodes as soon as:
- a leader detects one of his followers disconnecting.
- a follower detects its leader disconnecting.
In some of our X-Pack REST tests we have to wait for pending tasks to
complete. We are now needing this functionality in ESRestTestCase for
the docs tests where we run against X-Pack features. This commit moves
the helper method that we have in X-Pack to ESRestTestCase, and removes
duplicate logic from waiting for rollup tasks to complete.
As master-eligible nodes join or leave the cluster we should give them votes or
take them away, in order to maintain the optimal level of fault-tolerance in
the system. #33924 introduced the `Reconfigurator` to calculate the optimal
configuration of the cluster, and in this change we add the plumbing needed to
actually perform the reconfigurations needed as the cluster grows or shrinks.
Since #34288, we might hit deadlock if the FollowTask has more fetchers
than writers. This can happen in the following scenario:
Suppose the leader has two operations [seq#0, seq#1]; the FollowTask has
two fetchers and one writer.
1. The FollowTask issues two concurrent fetch requests: {from_seq_no: 0,
num_ops:1} and {from_seq_no: 1, num_ops:1} to read seq#0 and seq#1
respectively.
2. The second request which fetches seq#1 completes before, and then it
triggers a write request containing only seq#1.
3. The primary of a follower fails after it has replicated seq#1 to
replicas.
4. Since the old primary did not respond, the FollowTask issues another
write request containing seq#1 (resend the previous write request).
5. The new primary has seq#1 already; thus it won't replicate seq#1 to
replicas but will wait for the global checkpoint to advance at least
seq#1.
The problem is that the FollowTask has only one writer and that writer
is waiting for seq#0 which won't be delivered until the writer completed.
This PR proposes to replicate existing operations with the old primary
term (instead of the current term) on the follower. In particular, when
the following primary detects that it has processed an process already,
it will look up the term of an existing operation with the same seq_no
in the Lucene index, then rewrite that operation with the old term
before replicating it to the following replicas. This approach is
wait-free but requires soft-deletes on the follower.
Relates #34288
With this commit we cleanup hand-coded duplicate checks in XContent
parsing. They were necessary previously but since we reconfigured the
underlying parser in #22073 and #22225, these checks are obsolete and
were also ineffective unless an undocumented system property has been
set. As we also remove this escape hatch, we can remove the additional
checks as well.
Closes#22253
Relates #34588
Today, WriteReplicationAction uses a set of replication targets directly
from the primary shard of ReplicationGroup. It should be fine except
when we add/remove or promote a shard while a write action is executing.
We have encountered these two issues:
1. Replicas are not found in the replication targets. This happens
because we remove replicas but the WriteReplicationAction still uses the
old replication targets which include the removed replicas.
2. Access ReplicationGroup from a primary shard which hasn't activated
the primary-mode yet. This is because we won't activate the primary-mode
for a promoting shard after bumping the primary term which is executed
asynchronously.
This commit captures the replication targets when the replication group
is ready and continue using those targets until we re-compute the new
targets after the group is changed.
Closes#33457
This moves the rollup cleanup code for http tests from the high level rest
client into the test framework and then entirely removes the rollup cleanup
code for http tests that lived in x-pack. This is nice because it
consolidates the cleanup into one spot, automatically invokes the cleanup
without the test having to know that it is "about rollup", and should allow
us to run the rollup docs tests.
Part of #34530
`Engine.Searcher` is non-final today which makes it error prone
in the case of wrapping the underlying reader or lucene `IndexSearcher`
like we do in `IndexSearcherWrapper`. Yet, there is no subclass of it yet
that would be dramatic to just drop on the floor. With the start of development
of frozen indices this changed since in #34357 functionality was added to
a subclass which would be dropped if a `IndexSearcherWrapper` is installed on an index.
This change locks down the `Engine.Searcher` to prevent such a functionality trap.
The `AutoFollowTests` needs to restart the clusters between each tests, because
it is using auto follow stats in assertions. Auto follow stats are only reset
by stopping the elected master node.
Extracted the `testGetOperationsBasedOnGlobalSequenceId()` test to its own test, because it just tests the shard changes api.
* Renamed AutoFollowTests to AutoFollowIT, because it is an integration test.
Renamed ShardChangesIT to IndexFollowingIT, because shard changes it the name
of an internal api and isn't a good name for an integration test.
* move creation of NodeConfigurationSource to a seperate method
* Fixes issues after merge, moved assertSeqNos() and assertSameDocIdsOnShards() methods from ESIntegTestCase to InternalTestCluster, so that ccr tests can use these methods too.
This change disallows negative query boosts. Negative scores are not allowed in Lucene 8 so
it is easier to just disallow negative boosts entirely. We should also deprecate negative boosts
in 6x in order to ensure that users are aware when they'll upgrade to ES 7.
Relates #33309
Today we rewrite the operations from the leader with the term of the
following primary because the follower should own its history. The
problem is that a newly promoted primary may re-assign its term to
operations which were replicated to replicas before by the previous
primary. If this happens, some operations with the same seq_no may be
assigned different terms. This is not good for the future optimistic
locking using a combination of seqno and term.
This change ensures that the primary of a follower only processes an
operation if that operation was not processed before. The skipped
operations are guaranteed to be delivered to replicas via either
primary-replica resync or peer-recovery. However, the primary must not
acknowledge until the global checkpoint is at least the highest seqno of
all skipped ops (i.e., they all have been processed on every replica).
Relates #31751
Relates #31113
Since all calls to `ESLoggerFactory` outside of the logging package were
deprecated, it seemed like it'd simplify things to migrate all of the
deprecated calls and declare `ESLoggerFactory` to be package private.
This does that.
Today's CoordinatorTests have a limited amount of randomisation in how things
are scheduled. However, to be fully confident in Zen2's liveness we require the
system to stabilise after any permitted sequence of events. We can achieve
this by running the system in a much more random fashion for a while, with much
larger variation in when things are scheduled (simulating GC pressure and
network disruption) and then continuing to assert that the system stabilises as
we expect. When running randomly, we do not expect to make significant progress
and merely verify that no safety property is violated.
This change introduces the runRandomly() test method which implements this
idea. It also fixes a handful of liveness bugs that this first version of
runRandomly() exposed.
Adds support for the get rollup job to the High Level REST Client. I had
to do three interesting and unexpected things:
1. I ported the rollup state wiping code into the high level client
tests. I'll move this into the test framework in a followup and remove
the x-pack version.
2. The `timeout` in the rollup config was serialized using the
`toString` representation of `TimeValue` which produces fractional time
values which are more human readable but aren't supported by parsing. So
I switched it to `getStringRep`.
3. Refactor the xcontent round trip testing utilities so we can test
parsing of classes that don't implements `ToXContent`.
Today we schedule tasks (both immediate and future ones) exactly when
requested. In fact it is more realistic to allow for a small amount of delay in
the scheduling of tasks, and this helps to exercise more interleavings of
actions and therefore to improve test coverage.
This change adds to the DeterministicTaskQueue the ability to add a random
delay to the scheduling of tasks.
This change also provides more explicit timeouts for stabilisation in the
CoordinatorTests.
Using the randomised scheduling feature in the CoordinatorTests also found a
situation in which we could become a leader, then a candidate, and then a
leader again very quickly, causing a clash of the _BECOME_MASTER_ and
_FINISH_ELECTION_ tasks. We change their behaviour to not consider these
duplicates to be problematic.
This change introduces the indexing optimization using sequence numbers
in the FollowingEngine. This optimization uses the max_seq_no_updates
which is tracked on the primary of the leader and replicated to replicas
and followers.
Relates #33656
Fixes the equals and hash function to ignore the order of aggregations to ensure equality after serialization
and deserialization. This ensures storing configs with aggregation works properly.
This also addresses a potential issue in caching when the same query contains aggregations but in
different order. 1st it will not hit in the cache, 2nd cache objects which shall be equal might end up twice in
the cache.
The synonym filters no longer need access to the AnalysisRegistry in their
constructors, so we can remove the special-case code and move them to the
common analysis module.
This commit means that synonyms are no longer available for `server` integration tests,
so several of these are either rewritten or migrated to the common analysis module
as rest-spec-api tests
This commit adds the ability to plug in compilation of custom contexts
in mock script engine. This is needed for testing plugins which add
custom contexts like watcher.
* Handle MatchNoDocsQuery in span query wrappers
This change adds a new SpanMatchNoDocsQuery query that replaces
MatchNoDocsQuery in the span query wrappers.
The `wildcard` query now returns MatchNoDocsQuery if the target field is not
in the mapping (#34093) so we need the equivalent span query in order to
be able to pass it to other span wrappers.
Closes#34105
EngineSearcher can be easily folded into Engine.Searcher which removes
a level of inheritance that is necessary for most of it's subclasses.
This change folds it into Engine.Searcher and removes the dependency on
ReferenceManager.
This commit duplicates REST tests for the
- `indices.create`
- `indices.put_mapping`
- `indices.get_mapping`
- `index`
- `get`
- `delete`
- `update`
- `bulk`
APIs, so that we both test them when used without types (include_type_name=false)
and with types, mostly for mixed-version cluster tests.
Given a suite called `X_test_name.yml`, I first copied it to
`(X+1)_test_name_with_types.yml` and then changed `X_test_name.yml` to set
`include_type_name=false` on every API that supports it.
Relates #15613
This commits creates a DateMathParser interface, which is already
implemented for both joda and java time. While currently the java time
DateMathParser is not used, this change will allow a followup which will
create a DateMathParser from a DateFormatter, so the caller does not
need to know the internals of the DateFormatter they have.
Previously, unmapped aggs try to delegate reduction to a sibling agg that is
mapped. That delegated agg will run the reductions, and also
reduce any pipeline aggs. But because delegation comes before running
pipelines, the unmapped agg _also_ tries to run pipeline aggs.
This causes the pipeline to run twice, and potentially double it's output
in buckets which can create invalid JSON (e.g. same key multiple times)
and break when converting to maps.
This fixes by sorting the list of aggregations ahead of time so that mapped
aggs appear first, meaning they preferentially lead the reduction. If all aggs
are unmapped, the first unmapped agg simply creates a new unmapped object
and returns that for the reduction.
This means that unmapped aggs no longer defer and there is no chance for
a secondary execution of pipelines (or other side effects caused by deferring
execution).
Closes#33514
This change cleans up "unused variable" warnings. There are several cases were we
most likely want to suppress the warnings (especially in the client documentation test
where the snippets contain many unused variables). In a lot of cases the unused
variables can just be deleted though.
This commit removes the sysprop controlling whether ctx is in params for
update scripts and replaces it with use of the new ParameterMap, which
outputs a deprecation warning whenever params.ctx is used.
We start tracking max seq_no_of_updates on the primary in #33842. This
commit replicates that value from a primary to its replicas in replication
requests or the translog phase of peer-recovery.
With this change, we guarantee that the value of max seq_no_of_updates
on a replica when any index/delete operation is performed at least the
max_seq_no_of_updates on the primary when that operation was executed.
Relates #33656
Today the CoordinatorTests are not very reliable if two elections are scheduled
concurrently. Although we expect occasional failures due to this, in fact the
failures are much more common than expected due to a handful of issues. This PR
fixes these issues.
This commit introduces an AbstractSimpleSecurityTransportTestCase for
security transports. This classes provides transport tests that are
specific for security transports. Additionally, it fixes the tests referenced in
#33285.
This PR is the first step to use seq_no to optimize indexing operations.
The idea is to track the max seq_no of either update or delete ops on a
primary, and transfer this information to replicas, and replicas use it
to optimize indexing plan for index operations (with assigned seq_no).
The max_seq_no_of_updates on primary is initialized once when a primary
finishes its local recovery or peer recovery in relocation or being
promoted. After that, the max_seq_no_of_updates is only advanced internally
inside an engine when processing update or delete operations.
Relates #33656
With recent changes to the logging framework, the node name can no longer be injected into the logging output using the node.name setting, which means that for the CoordinatorTests (which are simulating a cluster in a fully deterministic fashion using a single thread), as all the different nodes are running under the same test thread, we are not able to distinguish which log lines are coming from which node. This commit readds logging for node ids in the CoordinatorTests, making two very small changes to DeterministicTaskQueue and TestThreadInfoPatternConverter.
This commit reverts most of #33157 as it introduces another race
condition and breaks a common case of watcher, when the first watch is
added to the system and the index does not exist yet.
This means, that the index will be created, which triggers a reload, but
during this time the put watch operation that triggered this is not yet
indexed, so that both processes finish roughly add the same time and
should not overwrite each other but act complementary.
This commit reverts the logic of cleaning out the ticker engine watches
on start up, as this is done already when the execution is paused -
which also gets paused on the cluster state listener again, as we can be
sure here, that the watches index has not yet been created.
This also adds a new test, that starts a one node cluster and emulates
the case of a non existing watches index and a watch being added, which
should result in proper execution.
Closes#33320
* Setting SO_LINGER for open but not connected non-blocking sockets
throws on OSX
* Fixed by only applying setting to connected sockets which will save
the same number of FDs as doing it on open sockets anyway
* closes#33879
Today we don't store the auto-generated timestamp of append-only
operations in Lucene; and assign -1 to every index operations
constructed from LuceneChangesSnapshot. This looks innocent but it
generates duplicate documents on a replica if a retry append-only
arrives first via peer-recovery; then an original append-only arrives
via replication. Since the retry append-only (delivered via recovery)
does not have timestamp, the replica will happily optimizes the original
request while it should not.
This change transmits the max auto-generated timestamp from the primary
to replicas before translog phase in peer recovery. This timestamp will
prevent replicas from optimizing append-only requests if retry
counterparts have been processed.
Relates #33656
Relates #33222
It is important that follower nodes periodically check that their leader is
still healthy and that they remain part of its cluster. If these checks fail
repeatedly then followers should attempt to find and join a new leader,
possibly electing one in the process. The LeaderChecker, introduced in this
commit, performs these periodic checks and deals with retries.
Currently, assertSeqNos assumes that the cluster is stable at the end of
the test (i.e., no more shard movement). However, this assumption does
not always hold. In these cases, we can stop the assertion instead of
failing a test.
Closes#33704
Changes the default of the `node.name` setting to the hostname of the
machine on which Elasticsearch is running. Previously it was the first 8
characters of the node id. This had the advantage of producing a unique
name even when the node name isn't configured but the disadvantage of
being unrecognizable and not being available until fairly late in the
startup process. Of particular interest is that it isn't available until
after logging is configured. This forces us to use a volatile read
whenever we add the node name to the log.
Using the hostname is available immediately on startup and is generally
recognizable but has the disadvantage of not being unique when run on
machines that don't set their hostname or when multiple elasticsearch
processes are run on the same host. I believe that, taken together, it
is better to default to the hostname.
1. Running multiple copies of Elasticsearch on the same node is a fairly
advanced feature. We do it all the as part of the elasticsearch build
for testing but we make sure to set the node name then.
2. That the node.name defaults to some flavor of "localhost" on an
unconfigured box feels like it isn't going to come up too much in
production. I expect most production deployments to at least set the
hostname.
As a bonus, production deployments need no longer set the node name in
most cases. At least in my experience most folks set it to the hostname
anyway.
Wraps all lines in our test framework at 140 characters because that is
our standard line length and removes all of the checkstyle suppressions
for the test framework.
Drops most of `ModuleTestCase` because it isn't used and we're moving
away from using guice in the way that it wants to test anyway. Also
switches a few classes that extend it but don't use it to extend
`ESTestCase` instead.
* TESTS: Set SO_LINGER = 0 for MockNioTransport
* Prevents lingering sockets in TIME_WAIT piling up during test runs and leading to port collisions that manifest as timeouts
* Fixes#32552
This change fixes a bug introduced in 6.3 that prevents fields with an explicit
similarity to be updated. It also adds a test that checks this case for similarities
but also for analyzers since they could suffer from the same problem.
Closes#33611
Today we use a special unicast hosts provider, the `MockUncasedHostsProvider`,
in many integration tests, to deal with the dynamic nature of the allocation of
ports to nodes. However #33241 allows us to use file-based discovery to achieve
the same goal, so the special test-only `MockUncasedHostsProvider` is no longer
required.
This change removes `MockUncasedHostProvider` and replaces it with file-based
discovery in tests based on `EsIntegTestCase`.
For correctness we need to verify whether the history uuid of the leader
index shards never changes while that index is being followed.
* The history UUIDs are recorded as custom index metadata in the follow index.
* The follow api validates whether the current history UUIDs of the leader
index shards are the same as the recorded history UUIDs.
If not the follow api fails.
* While a follow index is following a leader index; shard follow tasks
on each shard changes api call verify whether their current history uuid
is the same as the recorded history uuid.
Relates to #30086
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
This change adds a `_source` only snapshot repository that allows to wrap
any existing repository as a _backend_ to snapshot only the `_source` part
including live docs markers. Snapshots taken with the `source` repository
won't include any indices, doc-values or points. The snapshot will be reduced in size and
functionality such that it requires full re-indexing after it's successfully restored.
The restore process will copy the `_source` data locally starts a special shard and engine
to allow `match_all` scrolls and searches. Any other query, or get call will fail with and unsupported operation exception. The restored index is also marked as read-only.
This feature aims mainly for disaster recovery use-cases where snapshot size is
a concern or where time to restore is less of an issue.
**NOTE**: The snapshot produced by this repository is still a valid lucene index. This change doesn't allow for any longer retention policies which is out of scope for this change.
When a replica starts following a newly promoted primary, it may have
some operations which don't exist on the new primary. Thus we need to
throw those operations to align a replica with the new primary. This can
be done by first resetting an engine from the safe commit, then replaying
the local translog up to the global checkpoint.
Relates #32867
Today the full cluster restart tests do not preserve cluster settings on
restart. This is a mistake because it is not an accurate reflection of
reality, we do not expect users to clear cluster settings when they
perform a full cluster restart. This commit makes it so that all full
cluster restart tests preserve settings on upgrade.
* LeafCollector.setScorer() now takes a Scorable
* Scorers may not have null Weights
* IndexWriter.getFlushingBytes() reports how much memory is being used by IW threads writing to disk
In some cases we want to skip wiping cluster settings after a REST
test. For example, one use-case would be in the full cluster restart
tests where want to test cluster settings before and after a full
cluster restart. If we wipe the cluster settings before the restart,
then it would not be possible to assert on them after the restart.
In some cases we want to deprecate a setting, and then automatically
upgrade uses of that setting to a replacement setting. This commit adds
infrastructure for this so that we can upgrade settings when recovering
the cluster state, as well as when such settings are dynamically applied
on cluster update settings requests. This commit only focuses on cluster
settings, index settings can build on this infrastructure in a
follow-up.
This commit adds license checks for the auto-follow implementation. We
check the license on put auto-follow patterns, and then for every
coordination round we check that the local and remote clusters are
licensed for CCR. In the case of non-compliance, we skip coordination
yet continue to schedule follow-ups.
This commit ensures that we bootstrap a new history_uuid when force
allocating a stale primary. A stale primary should never be the source
of an operation-based recovery to another shard which exists before the
forced-allocation.
Closes#26712
Change the logging infrastructure to handle when the node name isn't
available in `elasticsearch.yml`. In that case the node name is not
available until long after logging is configured. The biggest change is
that the node name logging no longer fixed at pattern build time.
Instead it is read from a `SetOnce` on every print. If it is unset it is
printed as `unknown` so we have something that fits in the pattern.
On normal startup we don't log anything until the node name is available
so we never see the `unknown`s.
Instead of passing DirectoryService which causes yet another dependency
on Store we can just pass in a Directory since we will just call
`DirectoryService#newDirectory()` on it anyway.
This change collapses all metrics aggregations classes into a single package `org.elasticsearch.aggregations.metrics`.
It also restricts the visibility of some classes (aggregators and factories) that should not be used outside of the package.
Relates #22868
When we rollover and index we write the conditions of the rollover that
the old index met into the old index. Loading this index metadata
requires a working `NamedXContentRegistry` that has been populated with
parsers from the rollover infrastructure. We had a few loads that didn't
use a working `NamedXContentRegistry` and so would fail if they ever
encountered an index that had been rolled over. Here are the locations
of the loads and how I fixed them:
* IndexFolderUpgrader - removed entirely. It existed to support opening
indices made in Elasticsearch 2.x. Since we only need this change as far
back as 6.4.1 which will supports reading from indices created as far
back as 5.0.0 we should be good here.
* TransportNodesListGatewayStartedShards - wired the
`NamedXContentRegistry` into place.
* TransportNodesListShardStoreMetaData - wired the
`NamedXContentRegistry` into place.
* OldIndexUtils - removed entirely. It existed to support the zip based
index backwards compatibility tests which we've since replaced with code
that actually runs old versions of Elasticsearch.
In addition to fixing the actual problem I added full cluster restart
integration tests for rollover which would have caught this problem and
I added an extra assertion to IndexMetaData's deserialization code which
will trip if we try to deserialize and index's metadata without a fully
formed `NamedXContentRegistry`. It won't catch if use the *wrong*
`NamedXContentRegistry` but it is better than nothing.
Closes#33316
This commit allows us to use different TranslogRecoveryRunner when
recovering an engine from its local translog. This change is a
prerequisite for the commit-based rollback PR.
Relates #32867
The main benefit of the upgrade for users is the search optimization for top scored documents when the total hit count is not needed. However this optimization is not activated in this change, there is another issue opened to discuss how it should be integrated smoothly.
Some comments about the change:
* Tests that can produce negative scores have been adapted but we need to forbid them completely: #33309Closes#32899
This removes `PhaseAfterStep` in favor of a new `PhaseCompleteStep`. This step
in only a marker that the `LifecyclePolicyRunner` needs to halt until the time
indicated for entering the next phase.
This also fixes a bug where phase times were encapsulated into the policy
instead of dynamically adjusting to policy changes.
Supersedes #33140, which it replaces
Relates to #29823
This commit is related to #32517. It allows an "server_name"
attribute on a DiscoveryNode to be propagated to the server using
the TLS SNI extentsion. This functionality is only implemented for
the netty security transport.
Now that types are unique per mapping we can retrieve the document mapper
without referencing the type. This fixes an NPE when stored fields are disabled.
For 6x we'll need a different fix since mappings can still have multiple types.
Relates #32941
This commit introduces the formal notion of a private setting. This
enables us to register some settings that we had previously not
registered as fully-fledged settings to avoid them being exposed via
APIs such as the create index API. For example, we had hacks in the
codebase to allow index.version.created to be passed around inside of
settings objects, but was not registered as a setting so that if a user
tried to use the setting on any API then they would get an
exception. This prevented users from setting index.version.created on
index creation, or updating it via the index settings API. By
introducing private settings, we can continue to reject these attempts,
yet now we can represent these settings as actual settings. In this
change, we register index.version.created as an actual setting. We do
not cutover all settings that we had been treating as private in this
pull request, it is already quite large due to moving some tests around
to account for the fact that some tests need to be able to set the
index.version.created. This can be done in a follow-up change.
Drops `Settings` from some logging ctors now that they are no longer
needed. This should allow us to stop passing `Settings` around to quite
as many places.
This PR integrates Lucene soft-deletes(LUCENE-8200) into Elasticsearch.
Highlight works in this PR include:
- Replace hard-deletes by soft-deletes in InternalEngine
- Use _recovery_source if _source is disabled or modified (#31106)
- Soft-deletes retention policy based on the global checkpoint (#30335)
- Read operation history from Lucene instead of translog (#30120)
- Use Lucene history in peer-recovery (#30522)
Relates #30086Closes#29530
---
These works have been done by the whole team; however, these individuals
(lexical order) have significant contribution in coding and reviewing:
Co-authored-by: Adrien Grand <jpountz@gmail.com>
Co-authored-by: Boaz Leskes <b.leskes@gmail.com>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: Simon Willnauer <simonw@apache.org>
This PR integrates Lucene soft-deletes(LUCENE-8200) into Elasticsearch.
Highlight works in this PR include:
- Replace hard-deletes by soft-deletes in InternalEngine
- Use _recovery_source if _source is disabled or modified (#31106)
- Soft-deletes retention policy based on the global checkpoint (#30335)
- Read operation history from Lucene instead of translog (#30120)
- Use Lucene history in peer-recovery (#30522)
Relates #30086Closes#29530
---
These works have been done by the whole team; however, these individuals
(lexical order) have significant contribution in coding and reviewing:
Co-authored-by: Adrien Grand jpountz@gmail.com
Co-authored-by: Boaz Leskes b.leskes@gmail.com
Co-authored-by: Jason Tedor jason@tedor.me
Co-authored-by: Martijn van Groningen martijn.v.groningen@gmail.com
Co-authored-by: Nhat Nguyen nhat.nguyen@elastic.co
Co-authored-by: Simon Willnauer simonw@apache.org
Some AbstractDisruptionTestCase tests start failing since we enabled
assertSeqNos (in #33130). They fail because the assertSeqNos assertion
queries cluster stats while the cluster is disrupted or not formed yet.
This commit switches to use the cluster state and shard stats directly
from the test cluster.
Closes#33251
This commit checks that when we manually add a class to
the codebase map, that it does in-fact not exist on the classpath
in a jar. This will only be true if we are using the test framework
externally such as when a user develops a plugin.
We generate slightly different NoOps in InternalEngine and
TransportShardBulkAction for the same failure.
1. InternalEngine uses Exception#getFailure to generate a message
without the class name: newOp [NoOp{seqNo=1, primaryTerm=1,
reason='Contexts are mandatory in context enabled completion field
[suggest_context]'}].
2. TransportShardBulkAction uses Exception#toString to generate a
message with the class name: NoOp{seqNo=1, primaryTerm=1,
reason='java.lang.IllegalArgumentException: Contexts are mandatory in
context enabled completion field [suggest_context]'}.
If a write operation fails while a replica is recovering, that replica
will possibly receive two different NoOps: one from recovery and one
from replication. These two different NoOps will trip
TranslogWriter#assertNoSeqNumberConflict assertion.
This commit ensures that we generate the same Noop for the same failure.
Closes#32986
This adds support for connecting to a remote cluster through
a tcp proxy. A remote cluster can configured with an additional
`search.remote.$clustername.proxy` setting. This proxy will be used
to connect to remote nodes for every node connection established.
We still try to sniff the remote clsuter and connect to nodes directly
through the proxy which has to support some kind of routing to these nodes.
Yet, this routing mechanism requires the handshake request to include some
kind of information where to route to which is not yet implemented. The effort
to use the hostname and an optional node attribute for routing is tracked
in #32517Closes#31840
If a shard was closed, we return null for SeqNoStats. Therefore the
assertion assertSeqNos will hit NPE when it verifies a closed shard.
This commit skips closed shards in assertSeqNos and enables this
assertion in AbstractDisruptionTestCase.
This commit adds a hook to AbstractSerializingTestCase to enable
skipping asserting that the x-content of the test instance and an
instance parsed from the x-content of the test instance are the
same. While we usually expect these to be the same, they will not be the
same when exceptions are involved because the x-content there is lossy.
Adds the logic for handling joins by a prospective leader. Introduces the Coordinator class with the
basic lifecycle modes (candidate, leader, follower) as well as a JoinHelper class that contains most
of the plumbing for handling joins.
* `foobar.txGet()` appears to return before `serviceB.stop()` returns, causing `ServiceB.close()` to run concurrently with the `stop` call and running into a race codition
* Closes#32863
We used to set `maxScore` to `0` within `TopDocs` in situations where there is really no score as the size was set to `0` and scores were not even tracked. In such scenarios, `Float.Nan` is more appropriate, which gets converted to `max_score: null` on the REST layer. That's also more consistent with lucene which set `maxScore` to `Float.Nan` when merging empty `TopDocs` (see `TopDocs#merge`).
This change allows an engine to recover from its local translog up to
the given seqno. The extended API can be used in these use cases:
When a replica starts following a new primary, it resets its index to
the safe commit, then replays its local translog up to the current
global checkpoint (see #32867).
When a replica starts a peer-recovery, it can initialize the
start_sequence_number to the persisted global checkpoint instead of the
local checkpoint of the safe commit. A replica will then replay its
local translog up to that global checkpoint before accepting remote
translog from the primary. This change will increase the chance of
operation-based recovery. I will make this in a follow-up.
Relates #32867
Today, CapturingTransport#createCapturingTransportService creates a transport
service with a connection manager with reasonable default behaviours, but
overriding this behaviour in a consumer is a litle tricky. Additionally, the
default behaviour for opening a connection duplicates the content of the
CapturingTransport#openConnection() method.
This change removes this duplication by delegating to openConnection() and
introduces overridable nodeConnected() and onSendRequest() methods so that
consumers can alter this behaviour more easily.
Relates #32246 in which we test the mechanisms for opening connections to
unknown (and possibly unreachable) nodes.
This change introduces a dedicated ConnectionManager for every RemoteClusterConnection
such that there is not state shared with the TransportService internal ConnectionManager.
All connections to a remote cluster are isolated from the TransportService but still uses
the TransportService and it's internal properties like the Transport, tracing and internal
listener actions on disconnects etc.
This allows a remote cluster connection to have a different lifecycle than a local cluster connection,
also local discovery code doesn't get notified if there is a disconnect on from a remote cluster and
each connection can use it's own dedicated connection profile which allows to have a reduced set of
connections per cluster without conflicting with the local cluster.
Closes#31835
An election requires a node to select a term that is higher than all
previously-seen terms. If nodes are too enthusiastic about starting elections
then they can effectively excludes itself from the cluster until the leader can
bump to a still-higher term, and if this process repeats then a single faulty
node can prevent the cluster from making useful progress.
The solution is to start the election with a pre-voting round to ensure that
there is at least a quorum of nodes who believe there to be no leader.
This also fixes up some merge issues.
This is related to #32517. This commit passes the DiscoveryNode to the
initiateChannel method for different Transport implementation. This
will allow additional attributes (besides just the socket address) to be
used when opening channels.
This is a followup to #31886. After that commit the
TransportConnectionListener had to be propogated to both the
Transport and the ConnectionManager. This commit moves that listener
to completely live in the ConnectionManager. The request and response
related methods are moved to a TransportMessageListener. That listener
continues to live in the Transport class.
This is related to #31835. It moves the default connection profile into
the ConnectionManager class. The will allow us to have different
connection managers with different profiles.
This removes custom Response classes that extend `AcknowledgedResponse` and do nothing, these classes are not needed and we can directly use the non-abstract super-class instead.
While this appears to be a large PR, no code has actually changed, only class names have been changed and entire classes removed.
This commit fixes existing uses of forbidden apis in the test framework
and re-enables the forbidden apis check. It was previously completely
disabled and had missed a rename of the forbidden apis signatures files.
closes#32772
This is related to #31835. This commit adds a connection manager that
manages client connections to other nodes. This means that the
TcpTransport no longer maintains a map of nodes that it is connected
to.
Increases testability of MasterService and the discovery layer. Changes:
- Async publish method
- Moved a few interfaces/classes top-level to simplify imports
- Deterministic MasterService implementation for tests
Our rest testing framework has support for sniffing the host metadata on
startup and, before this change, it'd sniff that metadata before running
the first test. This prevents running these tests against
elasticsearch installations that won't support sniffing like Elastic
Cloud. This change allows tests to only sniff for metadata when they
encounter a test with a `node_selector`. These selectors are the things
that need the metadata anyway and they are super rare. Tests that use
these won't be able to run against installations that don't support
sniffing but we can just skip them. In the case of Elastic Cloud, these
tests were never going to work against Elastic Cloud anyway.
Currently AbstractBuilderTestCase generates certain random values in its
`beforeTest()` method annotated with @Before only the first time that a test
method in the suite is run while initializing the serviceHolder that we use for
the rest of the test. This changes the values of subsequent random values
and has the effect that when running single methods from a test suite with
"-Dtests.method=*", the random values it sees are different from when the same
test method is run as part of the whole test suite. This makes it hard to use
the reproduction lines logged on failure.
This change runs the inialization of the serviceHolder and the randomization
connected to it using the test runners master seed, so reproduction by running
just one method is possible again.
Closes#32400
Nhat Nguyen
Andrey Ershov
Yannick Welsch
Alpar Torok
David Turner
Armin Braun
Jim Ferenczi
Luca Cavanna
Tim Brooks
Adrien Grand
Zachary Tong
Zachary Tong
Jason Tedor
Christophe Bismuth
Andrey Ershov
Christoph Büscher
Simon Willnauer
Gordon Brown
Arthur Gavlyukovskiy
Jernej Klancic
Lee Hinman
Tanguy Leroux
Julie Tibshirani
Nick Knize
Boaz Leskes
Colin Goodheart-Smithe
Tal Levy
Nik Everett
Igor Motov
Seong-hyun, Oh
Ryan Ernst
Andy Bristol
Przemyslaw Gomulka
Pratik Sanglikar
Jay Modi
lipsill
Daniel Mitterdorfer
Martijn van Groningen
Kazuhiro Sera
Hendrik Muhs
Alan Woodward
Yogesh Gaikwad
Vladimir Dolzhenko
Alexander Reelsen
Tim Vernum
Or Bin
Lee Hinman
Matt Weber
Jonathan Little