When a node tries to join a cluster, it goes through a validation step to make sure the node is compatible with the cluster. Currently we validation that the node can read the cluster state and that it is compatible with the indexes of the cluster. This PR adds validation that the joining node's version is compatible with the versions of existing nodes. Concretely we check that:
1) The node's min compatible version is higher or equal to any node in the cluster (this prevents a too-new node from joining)
2) The node's version is higher or equal to the min compat version of all cluster nodes (this prevents a too old join where, for example, the master is on 5.6, there's another 6.0 node in the cluster and a 5.4 node tries to join).
3) The node's major version is at least as higher as the lowest node in the cluster. This is important as we use the minimum version in the cluster to stop executing bwc code for operations that require multiple nodes. If the nodes are already operating in "new cluster mode", we should prevent nodes from the previous major to join (even if they are wire level compatible). This does mean that if you have a very unlucky partition during the upgrade which partitions all old nodes which are also a minority / data nodes only, the may not be able to re-join the cluster. We feel this edge case risk is well worth the simplification it brings to BWC layers only going one way.
Also, the node join validation can now selectively fail specific nodes (previously the entire batch was failed). This is an important preparation for a follow up PR where we plan to have a rejected joining node die with dignity.
This commit changes the default heap size to 1 GB. Experimenting with
elasticsearch is often done on laptops, and 1 GB is much friendlier to
laptop memory. It does put more pressure on the gc, but the tradeoff is
a smaller default footprint. Users running in production can (and
should) adjust the heap size as necessary for their usecase.
This commit enables management of the main Elasticsearch log files
out-of-the-box by the following changes:
- compress rolled logs
- roll logs every 128 MB
- maintain a sliding window of logs
- remove the oldest logs maintaining no more than 2 GB of compressed
logs on disk
Relates #25660
This commit removes the environment variable ES_JVM_OPTIONS that allows
the jvm.options file to sit separately from the rest of the config
directory. Instead, we use the CONF_DIR environment variable for custom
configuration location just as we do for the other configuration files.
Relates #25679
Add an Important admonition for upgrading via the command line
using the Windows MSI Installer. This calls out the need to pass
the same command line options for an upgrade as were used for
the initial installation.
We previously tried to maintain (while not formally supporting) 32-bit
support, although we never tested this anywhere in CI. Since we do not
formally support this, and 32-bit usage is very low, we have elected to
no longer maintain 32-bit support. This commit removes any implication
of 32-bit support.
Relates #25435
This commit removes the default path settings for data and logs. With
this change, we now ship the packages with these settings set in the
elasticsearch.yml configuration file rather than going through the
default.path.data and default.path.logs dance that we went through in
the past.
Relates #25408
This commit removes path.conf as a valid setting and replaces it with a
command-line flag for specifying a non-default path for configuration.
Relates #25392
* Add MSI installation to documentation
Move installation documentation for Windows with the .zip archive into the zip and tar installation documentation, and clearly indicate any differences for installing on macOS/Linux and Windows.
* Separate out installation with .zip on Windows
During package install on systemd-based systems, some sysctl settings
should be set (e.g. vm.max_map_count).
In some environments, changing sysctl settings plainly does not work;
previously a global environment variable named
ES_SKIP_SET_KERNEL_PARAMETERS was introduced to skip calling sysctl, but
this causes trouble for:
- configuration management systems, which usually cannot apply an env
var when running a package manager
- package upgrades, which will not have the env var set any more, and
thus leaving the package management system in a bad state (possibly
half-way upgraded, can be very hard to recover)
This removes the env var again and instead of calling systemd-sysctl
manually, tells systemd to restart the wrapper unit - which itself can
be masked by system administrators or management tools if it is known
that sysctl does not work in a given environment.
The restart is not silent on systems in their default configuration, but
is ignored if the unit is masked.
Relates #24234
Our strong recommendation is disabling swap over any other alternative
to avoid the JVM from landing on disk. This commit clarifies the docs in
this regard.
Add info about the base image used and the github repo of
elasticsearch-docker.
Clarify that setting `memlock=-1:-1` is only a requirement when
`bootstrap_memory_lock=true` and the alternatives we document
elsewhere in docs for disabling swap are valid for Docker as well.
Additionally, with latest versions of docker-ce shipping with
unlimited (or high enough) defaults for `nofile` and `nproc`, clarify
that explicitly setting those per ES container is not required, unless
they are not defined in the Docker daemon.
Finally simplify production `docker-compose.yml` example by removing
unneeded options.
Relates #24389
For the Windows service, JAVA_HOME should be set to the path to the
JDK. We should make this clear in the docs to help users avoid
frustrating startup problems.
Relates #24260
This commit rewords the note on whitespace in Log4j settings to not
refer to only of the examples on the page, but instead be clear that the
note applies to all the examples on the page.
A confusing thing that can happen when configuring Log4j is that
extraneous whitespace throws off its configuration parsing yet the error
messages that arise give no indication that this is the problem. This
commit adds a note to the docs.
Relates #24198
Elasticsearch runs as user elasticsearch with uid:gid 1000:1000 inside
the Docker container. Clarify that bind mounted local directories need
to be accessible by this user.
Relates #24092
Today Elasticsearch allows default settings to be used only if the
actual setting is not set. These settings are trappy, and the complexity
invites bugs. This commit removes support for default settings with the
exception of default.path.data, default.path.conf, and default.path.logs
which are maintainted to support packaging. A follow-up will remove
support for these as well.
Relates #24093
While there are use-cases where a single-node is in production, there
are also use-cases for starting a single-node that binds transport to an
external interface where the node is not in production (for example, for
testing the transport client against a node started in a Docker
container). It's tricky to balance the desire to always enforce the
bootstrap checks when a node might be in production with the need for
the community to perform testing in situations that would trip the
bootstrap checks. This commit enables some flexibility for these
users. By setting the discovery type to "single-node", we disable the
bootstrap checks independently of how transport is bound. While this
sounds like a hole in the bootstrap checks, the bootstrap checks can
already be avoided in the single-node use-case by binding only HTTP but
not transport. For users that are genuinely in production on a
single-node use-case with transport bound to an external use-case, they
can set the system property "es.enable.bootstrap.checks" to force
running the bootstrap checks. It would be a mistake for them not to do
this.
Relates #23598
The OpenJDK project provides early-access builds of upcoming
releases. These early-access builds are not suitable for
production. These builds sometimes end up on systems due to aggressive
packaging (e.g., Ubuntu). This commit adds a bootstrap check to ensure
these early-access builds are not being used in production.
Relates #23743
This commit adds a system property that enables end-users to explicitly
enforce the bootstrap checks, independently of the binding of the
transport protocol. This can be useful for single-node production
systems that do not bind the transport protocol (and thus the bootstrap
checks would not be enforced).
Relates #23585
When users need to specify a custom location for configuration files,
they also need to specify a custom location for the jvm.options file yet
our docs are absent in this regard. This commit adds a note to the
rolling upgrade docs explaining this situation.
Relates #22747
For certain situations, end-users need the base path for Elasticsearch
logs. Exposing this as a property is better than hard-coding the path
into the logging configuration file as otherwise the logging
configuration file could easily diverge from the Elasticsearch
configuration file. Additionally, Elasticsearch will only have
permissions to write to the log directory configured in the
Elasticsearch configuration file. This commit adds a property that
exposes this base path.
One use-case for this is configuring a rollover strategy to retain logs
for a certain period of time. As such, we add an example of this to the
documentation.
Additionally, we expose the property es.logs.cluster_name as this is
used as the name of the log files in the default configuration.
Finally, we expose es.logs.node_name in cases where node.name is
explicitly set in case users want to include the node name as part of
the name of the log files.
Relates #22625
Today when you do not specify a port for an entry in
discovery.zen.ping.unicast.hosts, the default port is the value of the
setting transport.profiles.default.port and falls back to the value of
transport.tcp.port if this is not set. For a node that is explicitly
bound to a different port than the default port, this means that the
default port will be equal to this explicitly bound port. Yet, the docs
say that we fall back to 9300 here. This commit corrects the docs.
Relates #22568
Fix the `Dockerfile` example in the `Customizing image` third configuration
method by adding the missing RUN instruction.
Originally reported by Shankar Vasudevan (@vshank77).
Relates #21973
#9261 added a warning about the use of `add-apt-repository` which is becoming obsolete over time as new distribution releases include later versions of `add-apt-repository` which don't automatically add the `deb-src` line. This change updates the documentation to make the block a note rather than a warning and adds two other reasons for avoiding `add-apt-repository` which are still relevant: avoiding edits to a system shared file and not requiring a large number of non-default packages to add one line of text to a file.
We try to install a system call filter on various operating systems
(Linux, macOS, BSD, Solaris, and Windows) but the setting
(bootstrap.seccomp) to control this is named after the Linux
implementation (seccomp). This commit replaces this setting with
bootstrap.system_call_filter. For backwards compatibility reasons, we
fallback to bootstrap.seccomp and log a deprecation message if
bootstrap.seccomp is set. We intend to remove this fallback in
6.0.0. Note that now is the time to make this change it's likely that
most users are not making this setting anyway as prior to version 5.2.0
(currently unreleased) it was not necessary to configure anything to
enable a node to start up if the system call filter failed to install
(we marched on anyway) but starting in 5.2.0 it will be necessary in
this case.
Relates #22226
When overriding a systemd configuration via a drop-in file, the
[Service] header is required. This commit adds this to an example
drop-in override in the configuring docs.
Relates #22038
Today if system call filters fail to install on startup, we log a
message but otherwise march on. This might leave users without system
call filters installed not knowing that they have implicitly accepted
the additional risk. We should not be lenient like this, instead clearly
informing the user that they have to either fix their configuration or
accept the risk of not having system call filters installed. This commit
adds a bootstrap check that if system call filters are enabled, they
must successfully install.
Relates #21940
The reference for the jvm.options docs recently changed from
es-java-opts to jvm-options. This commit fixes a broken reference that
arose as a result of this change.
Elasticsearch can be run in a few different ways:
- from the command line on Linux and Windows
- as a service on Linux and Windows
on both 32-bit client and 64-bit server VMs. We strive for a great
out-of-the-box experience any of these combinations but today it is
lacking on 32-bit client JVMs and on the Windows service. There are two
deficiencies that arise:
- on any 32-bit client JVM we fail to start out of the box because we
force the server JVM in jvm.options
- when installing the Windows service, the thread stack size must be
specified in jvm.options
This commit attempts to address these deficiencies.
We should continue to force the server JVM because there are systems
where the server JVM is not active by default (e.g., the 32-bit JDK on
Windows). This does mean that if a user tries to run with a client JVM
they will see a failure message at startup but this is the best that we
can do if we want to continue to force the server JVM. Thus, this commit
at least documents this situation.
To improve the situation with installing the Windows service, this
commit adds a default setting for the thread stack size. This default is
chosen based on the default thread stack size across all 64-bit server
JVMs. This means that if a user tries to run with a 32-bit JVM they
could otherwise see significantly higher memory usage (this situation is
complicated, it's really only on Windows where the extra memory usage is
egregious, but cutting into the 32-bit address space on any system is
bad). So this commit makes it so that the out-of-the-box experience is
improved for the Windows service on 64-bit server JVMs and we document
the need to adjust this setting on 32-bit JVMs.
Again, we are focusing on the out-of-the-box experience here and this
means optimizing for the best experience on any 64-bit server JVM as
this covers the vast majority of the user base. The users that are on
32-bit JVMs will suffer a little bit but at least now any user on any
64-bit server JVM can start Elasticsearch out of the box.
Finally, we fix some references to the jvm.options documentation.
Relates #21920
During package install on systemd-based systems, we try to set
vm.max_map_count. On some systems (e.g., containers), users do not have
the ability to tune these parameters from within the container. This
commit provides an option for these users to skip setting such kernel
parameters.
Relates #21899
We log deprecation events at "WARN", so setting it to `info` means the events
are still logged. It must be set to `error` in order to disable the logging.
The important settings docs previously referred to a section regarding
the node.max_local_storage_nodes setting. This section was removed, but
the link was not. This commit removes that link.
Previously node.max_local_storage_nodes defaulted to fifty, and this
permitted users to start multiple instances of Elasticsearch sharing the
same data folder. This can be dangerous, and usually it does not make
sense to run more than one instance of Elasticsearch on a single
server. Because of this, we had a note in the important settings docs
advising users to set this setting to one. However, we have since
changed the default value of this setting to one so this advise is no
longer needed.
Relates #21305
On Windows the JDK uses `CreateFileW` which has a stupidly high
limit for the number of `Handle`s it can make - `16 * 1024 * 1024`.
So this isn't really a problem on Windows at all.
Closes#20732
This commit fixes the documentation for configuring the Java I/O temp
dir which incorrectly suggested using the -D flag as a parameter on the
command line; these flags have been removed and should now be specified
as arguments to the JVM using either the ES_JAVA_OPTS environment
variable or using the jvm.options configuration file.
Closes#20652
With the unified release process across the elastic stack, download
links for all products are changing. This change updates docs referring
to the old download and packages urls.
Note that this change also updates the plugin installation command as
the url for downloads is being changed to be consistent with that for
packages (both plural).
The serial collector is not suitable for running with a server
application like Elasticsearch and can decimate performance and lead to
cluster instability. This commit adds a bootstrap check to prevent usage
of the serial collector when Elasticsearch is running in production
mode.
Relates #20558
Funny node names have been removed in #19456 and replaced by UUID. This commit removes these obsolete node names and replace them by real UUIDs in the documentation.
closes#20065
In 7560101ec7, the Elasticsearch logger
names were modified to be their fully-qualified class name (with some
exceptions for special loggers like the slow logs and the transport
tracer). This commit updates the docs accordingly.
Relates #20475
This commit adds a -q/--quiet option to Elasticsearch so that it does not log anything in the console and closes stdout & stderr streams. This is useful for SystemD to avoid duplicate logs in both journalctl and /var/log/elasticsearch/elasticsearch.log while still allows the JVM to print error messages in stdout/stderr if needed.
closes#17220
and be much more stingy about what we consider a console candidate.
* Add `// CONSOLE` to check-running
* Fix version in some snippets
* Mark groovy snippets as groovy
* Fix versions in plugins
* Fix language marker errors
* Fix language parsing in snippets
This adds support for snippets who's language is written like
`[source, txt]` and `["source","js",subs="attributes,callouts"]`.
This also makes language required for snippets which is nice because
then we can be sure we can grep for snippets in a particular language.
This commit configures the deprecation logs to be size-limited to 1 GB,
and compress these logs when they roll. The default configuration will
preserve up to four rolled logs.
Relates #20287
Boaz Leskes
Ryan Ernst
Jason Tedor
Viral-Inc
Russ Cam
Deb Adair
Lisa Cawley
Christian Hofstaedtler
Sergey Novikov
Oleksandr Chychkan
Daniel Mitterdorfer
Clinton Gormley
Dimitrios Liappis
Lee Hinman
Jayant Ameta
Nik Everett
Max Goodridge
Shashank Singh
Jonathan D Strootman
Jordan Robinson
Chris Adams
Itamar Syn-Hershko
Juan Paulo Gutierrez
Jared Carey
Nikhil Patel
Lee Hinman
Joeyn414
Chris Earle
Alexander Lin
Pascal Borreli
Tanguy Leroux
Luca Cavanna
gfyoung