Today `GatewayMetaState` implements `PersistedState` but it's an error to use
it as a `PersistedState` before it's been started, or if the node is
master-ineligible. It also holds some fields that are meaningless on nodes that
do not persist their states. Finally, it takes responsibility for both loading
the original cluster state and some of the high-level logic for writing the
cluster state back to disk.
This commit addresses these concerns by introducing a more specific
`PersistedState` implementation for use on master-eligible nodes which is only
instantiated if and when it's appropriate. It also moves the fields and
high-level persistence logic into a new `IncrementalClusterStateWriter` with a
more appropriate lifecycle.
Follow-up to #46326 and #46532
Relates #47001
Previously, queries on the _index field were not able to specify index aliases.
This was a regression in functionality compared to the 'indices' query that was
deprecated and removed in 6.0.
Now queries on _index can specify an alias, which is resolved to the concrete
index names when we check whether an index matches. To match a remote shard
target, the pattern needs to be of the form 'cluster:index' to match the
fully-qualified index name. Index aliases can be specified in the following query
types: term, terms, prefix, and wildcard.
This commit replaces the SearchContext used in AbstractQueryTestCase with
a QueryShardContext in order to reduce the visibility of search contexts.
Relates #46523
`testLogsWarningPeriodicallyIfClusterNotFormed` simulates a leader failure and
waits for long enough that a failing leader check is scheduled. However it does
not wait for the failing check to actually fail, which requires another two
actions and therefore might take up to 200ms more. Unlucky timing would result
in this test failing, for instance:
./gradle ':server:test' \
--tests "org.elasticsearch.cluster.coordination.CoordinatorTests.testLogsWarningPeriodicallyIfClusterNotFormed" \
-Dtests.jvm.argline="-Dhppc.bitmixer=DETERMINISTIC" \
-Dtests.seed=F18CDD0EBEB5653:E9BC1A8B062E697A
This commit adds the extra delay needed for the leader failure to complete as
expected.
Fixes#46920
This at a very low rate and with the force merge in place
before checking the cache size it's not clear why the cache
is not of size `0` -> seems something else
must be happening here that is unexpected.
-> add debug logging to this test to find out
Relates #46701
We were repeatedly trying to send shard state updates for aborted
snapshots on every cluster state update.
This is simply dead-code since those updates are already safely
sent in the callbacks passed to `SnapshotShardsService#snapshot`.
On master failover, we ensure that the status update is resent
via `SnapshotShardsService#syncShardStatsOnNewMaster`.
=> there is no need for trying to send updates here over and over
and this logic can safely be removed
This assertion was added during the development of required
pipelines. In the initial version of that work, the notion of whether or
not a request was forwarded from the coordinating node to an ingest node
was introduced. It was realized later that instead we needed to track
whether or not the pipeline for the request was resolved. When that
change was made, this assertion, while not incorrect, was left behind
and only applied if the coordnating node was forwarding the
request. Instead, the assertion applies whether or not the request is
being forwarded. This commit addresses that by moving the assertion and
renaming some variables.
This commit adds the ability to require an ingest pipeline on an
index. Today we can have a default pipeline, but that could be
overridden by a request pipeline parameter. This commit introduces a new
index setting index.required_pipeline that acts similarly to
index.default_pipeline, except that it can not be overridden by a
request pipeline parameter. Additionally, a default pipeline and a
request pipeline can not both be set. The required pipeline can be set
to _none to ensure that no pipeline ever runs for index requests on that
index.
This test is broken with a very low failure rate after recent changes.
Particularly after #45689 which does not check for duplicate snapshot
uuids during snapshot finalization any more.
The check for duplicate uuids during finalization was removed
conciously since it lead to problems during master failover.
This test fails because it increments the repository state id in an
unexpected manner now, starting from the impossible situation of having
the same snapshot UUID for two different repository state ids.
This situation can't normally be reached, but we manually crafted it here.
This test didn't do anything before though, because the manually crafted
cluster state would simply result in an error during finalization before
and nothing but a normal snapshot delete would be tested.
=> removing this test here, it doesn't test anything.
Closes#46843
When using auto-generated IDs + the ingest drop processor (which looks to be used by filebeat
as well) + coordinating nodes that do not have the ingest processor functionality, this can lead
to a NullPointerException.
The issue is that markCurrentItemAsDropped() is creating an UpdateResponse with no id when
the request contains auto-generated IDs. The response serialization is lenient for our
REST/XContent format (i.e. we will send "id" : null) but the internal transport format (used for
communication between nodes) assumes for this field to be non-null, which means that it can't
be serialized between nodes. Bulk requests with ingest functionality are processed on the
coordinating node if the node has the ingest capability, and only otherwise sent to a different
node. This means that, in order to reproduce this, one needs two nodes, with the coordinating
node not having the ingest functionality.
Closes#46678
In #46250 we will have to move to two different delete
paths for BwC. Both paths will share the initial
reads from the repository though so I extracted/separated the
delete logic away from the initial reads to significantly simplify
the diff against #46250 here.
Also, I added some JavaDoc from #46250 here as well which makes the
code a little easier to follow even ignoring #46250 I think.
Suppress the reasonable-history check in this test to guarantee we're always getting ops based recovery even after a background sync.
Closes#45953
Co-Authored-By: David Turner <david.turner@elastic.co>
In the case that an ingest processor factory relies on other configuration
in the cluster state in order to construct a processor instance then
it is currently undetermined if a processor facotry can be notified about
a change if multiple cluster state updates are bundled together and
if a processor implement `ClusterStateApplier` interface.
(IngestService implements this interface too)
The idea with ingest cluster state listener is that it is guaranteed to
update the processor factory first before the ingest service creates
a pipeline with their respective processor instances.
Currently this concept is used in the enrich branch:
https://github.com/elastic/elasticsearch/blob/enrich/x-pack/plugin/enrich/src/main/java/org/elasticsearch/xpack/enrich/EnrichProcessorFactory.java#L21
In this case it a processor factory is interested in enrich indices' _meta
mapping fields.
This is the third PR that merges changes made to server module from
the enrich branch (see #32789) into the master branch.
Changes to the server module are merged separately from the pr that will
merge enrich into master, so that these changes can be reviewed in isolation.
Reenable this test since it was fixed by #45689 in production
code (specifically, the fact that we write the `snap-` blobs
without overwrite checks now).
Only required adding the assumed blocking on index file writes
to test code to properly work again.
* Closes#25281
* Write metadata during snapshot finalization after segment files to prevent outdated metadata in case of dynamic mapping updates as explained in #41581
* Keep the old behavior of writing the metadata beforehand in the case of mixed version clusters for BwC reasons
* Still overwrite the metadata in the end, so even a mixed version cluster is fixed by this change if a newer version master does the finalization
* Fixes#41581
Without replicas we won't actually get any relocations
going when removing the node constraints in this test.
Adjusted the code to force relocations by forbidding
nodes that hold primaries instead.
Also, fixed the timeouts and asserted that we actually
get relocations.
Fixes#46276
* [ILM] Add date setting to calculate index age
Add the `index.lifecycle.origination_date` to allow users to configure a
custom date that'll be used to calculate the index age for the phase
transmissions (as opposed to the default index creation date).
This could be useful for users to create an index with an "older"
origination date when indexing old data.
Relates to #42449.
* [ILM] Don't override creation date on policy init
The initial approach we took was to override the lifecycle creation date
if the `index.lifecycle.origination_date` setting was set. This had the
disadvantage of the user not being able to update the `origination_date`
anymore once set.
This commit changes the way we makes use of the
`index.lifecycle.origination_date` setting by checking its value when
we calculate the index age (ie. at "read time") and, in case it's not
set, default to the index creation date.
* Make origination date setting index scope dynamic
* Document orignation date setting in ilm settings
(cherry picked from commit d5bd2bb77ee28c1978ab6679f941d7c02e389d32)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
* Parallelize Repository Cleanup Actions
Deleting root blobs and unreferenced indices can safely happen in parallel,
no need to have both operations run sequentially when they preclude all other
repository operations.
We added docs for proxy mode in #40281 but on reflection we should not be
documenting this setting since it does not play well with all proxies and we
can't recommend its use. This commit removes those docs and expands its Javadoc
instead.
We renew the CCR retention lease at a fixed interval, therefore it's
possible to have more than one in-flight renewal requests at the same
time. If requests arrive out of order, then the assertion is violated.
Closes#46416Closes#46013
Synced-flush consists of three steps: (1) force-flush on every active
copy; (2) check for ongoing indexing operations; (3) seal copies if
there's no change since step 1. If some indexing operations are
completed on the primary but not replicas, then Lucene commits from step
1 on replicas won't be the same as the primary's. And step 2 would pass
if it's executed when all pending operations are done. Once step 2
passes, we will incorrectly emit the "out of sync" warning message
although nothing wrong here.
Relates #28464
Relates #30244
There's nothing wrong in the logs from these failures. I think 30
seconds might not be enough to relocate shards with many documents as CI
is quite slow. This change increases the timeout to 60 seconds for these
relocation tests. It also dumps the hot threads in case of timed out.
Closes#46526Closes#46439
This change delays the creation of the SubSearchContext for nested and parent/child inner_hits
to the fetch sub phase in order to ensure that a SearchContext can built entirely from a
QueryShardContext. This commit also adds a validation step to the inner hits builder that ensures that we fail the request early if the inner hits path is invalid.
Relates #46523
Fixes that way linestrings that are crossing the antimeridian are
indexed due to a normalization bug these lines were decomposed into
a line segment that was stretching entire globe.
Fixes#43775
This makes the AllocatedPersistentTask#init() method protected so that
implementing classes can perform their initialization logic there,
instead of the constructor. Rollup's task is adjusted to use this
init method.
It also slightly refactors the methods to se a static logger in the
AllocatedTask instead of passing it in via an argument. This is
simpler, logged messages come from the task instead of the
service, and is easier for tests
This commit replaces the `SearchContext` with the `QueryShardContext` when building aggregator factories. Aggregator factories are part of the `SearchContext` so they shouldn't require a `SearchContext` to create them.
The main changes here are the signatures of `AggregationBuilder#build` that now takes a `QueryShardContext` and `AggregatorFactory#createInternal` that passes the `SearchContext` to build the `Aggregator`.
Relates #46523
* Fix Path comparisons for Windows tests
The test NodeEnvironmentTests#testCustonDataPaths worked just fine on
Darwin and Linux, but the comparison was breaking in Windows because one
path had the "C:\" prefix and the other one didn't. The simple fix is to
compare absolute paths rather than potentially relative ones.
Currently we allow `_field_names` fields to be disabled explicitely, but since
the overhead is negligible now we decided to keep it turned on by default and
deprecate the `enable` option on the field type. This change adds a deprecation
warning whenever this setting is used, going forward we want to ignore and finally
remove it.
Closes#27239
* More Efficient Ordering of Shard Upload Execution (#42791)
* Change the upload order of of snapshots to work file by file in parallel on the snapshot pool instead of merely shard-by-shard
* Inspired by #39657
* Cleanup BlobStoreRepository Abort and Failure Handling (#46208)
This commit replaces the `SearchContext` with the `QueryShardContext` when building collapsing conteext
Collapse context is part of the `SearchContext` so it shouldn't require a `SearchContext` to create one.
Relates #46523
This change adds an IndexSearcher and the node's BigArrays in the QueryShardContext.
It's a spin off of #46527 as this change is required to allow aggregation builder to solely use the
query shard context.
Relates #46523
Obviously we have to run the status request again to busy wait for
the `STARTED` state, just busy waiting on an existing response
won't do anything.
Closes#45917
* Add retention to Snapshot Lifecycle Management (#46407)
This commit adds retention to the existing Snapshot Lifecycle Management feature (#38461) as described in #43663. This allows a user to configure SLM to automatically delete older snapshots based on a number of criteria.
An example policy would look like:
```
PUT /_slm/policy/snapshot-every-day
{
"schedule": "0 30 2 * * ?",
"name": "<production-snap-{now/d}>",
"repository": "my-s3-repository",
"config": {
"indices": ["foo-*", "important"]
},
// Newly configured retention options
"retention": {
// Snapshots should be deleted after 14 days
"expire_after": "14d",
// Keep a maximum of thirty snapshots
"max_count": 30,
// Keep a minimum of the four most recent snapshots
"min_count": 4
}
}
```
SLM Retention is run on a scheduled configurable with the `slm.retention_schedule` setting, which supports cron expressions. Deletions are run for a configurable time bounded by the `slm.retention_duration` setting, which defaults to 1 hour.
Included in this work is a new SLM stats API endpoint available through
``` json
GET /_slm/stats
```
That returns statistics about snapshot taken and deleted, as well as successful retention runs, failures, and the time spent deleting snapshots. #45362 has more information as well as an example of the output. These stats are also included when retrieving SLM policies via the API.
* Add base framework for snapshot retention (#43605)
* Add base framework for snapshot retention
This adds a basic `SnapshotRetentionService` and `SnapshotRetentionTask`
to start as the basis for SLM's retention implementation.
Relates to #38461
* Remove extraneous 'public'
* Use a local var instead of reading class var repeatedly
* Add SnapshotRetentionConfiguration for retention configuration (#43777)
* Add SnapshotRetentionConfiguration for retention configuration
This commit adds the `SnapshotRetentionConfiguration` class and its HLRC
counterpart to encapsulate the configuration for SLM retention.
Currently only a single parameter is supported as an example (we still
need to discuss the different options we want to support and their
names) to keep the size of the PR down. It also does not yet include version serialization checks
since the original SLM branch has not yet been merged.
Relates to #43663
* Fix REST tests
* Fix more documentation
* Use Objects.equals to avoid NPE
* Put `randomSnapshotLifecyclePolicy` in only one place
* Occasionally return retention with no configuration
* Implement SnapshotRetentionTask's snapshot filtering and delet… (#44764)
* Implement SnapshotRetentionTask's snapshot filtering and deletion
This commit implements the snapshot filtering and deletion for
`SnapshotRetentionTask`. Currently only the expire-after age is used for
determining whether a snapshot is eligible for deletion.
Relates to #43663
* Fix deletes running on the wrong thread
* Handle missing or null policy in snap metadata differently
* Convert Tuple<String, List<SnapshotInfo>> to Map<String, List<SnapshotInfo>>
* Use the `OriginSettingClient` to work with security, enhance logging
* Prevent NPE in test by mocking Client
* Allow empty/missing SLM retention configuration (#45018)
Semi-related to #44465, this allows the `"retention"` configuration map
to be missing.
Relates to #43663
* Add min_count and max_count as SLM retention predicates (#44926)
This adds the configuration options for `min_count` and `max_count` as
well as the logic for determining whether a snapshot meets this criteria
to SLM's retention feature.
These options are optional and one, two, or all three can be specified
in an SLM policy.
Relates to #43663
* Time-bound deletion of snapshots in retention delete function (#45065)
* Time-bound deletion of snapshots in retention delete function
With a cluster that has a large number of snapshots, it's possible that
snapshot deletion can take a very long time (especially since deletes
currently have to happen in a serial fashion). To prevent snapshot
deletion from taking forever in a cluster and blocking other operations,
this commit adds a setting to allow configuring a maximum time to spend
deletion snapshots during retention. This dynamic setting defaults to 1
hour and is best-effort, meaning that it doesn't hard stop a deletion
at an hour mark, but ensures that once the time has passed, all
subsequent deletions are deferred until the next retention cycle.
Relates to #43663
* Wow snapshots suuuure can take a long time.
* Use a LongSupplier instead of actually sleeping
* Remove TestLogging annotation
* Remove rate limiting
* Add SLM metrics gathering and endpoint (#45362)
* Add SLM metrics gathering and endpoint
This commit adds the infrastructure to gather metrics about the different SLM actions that a cluster
takes. These actions are stored in `SnapshotLifecycleStats` and perpetuated in cluster state. The
stats stored include the number of snapshots taken, failed, deleted, the number of retention runs,
as well as per-policy counts for snapshots taken, failed, and deleted. It also includes the amount
of time spent deleting snapshots from SLM retention.
This commit also adds an endpoint for retrieving all stats (further commits will expose this in the
SLM get-policy API) that looks like:
```
GET /_slm/stats
{
"retention_runs" : 13,
"retention_failed" : 0,
"retention_timed_out" : 0,
"retention_deletion_time" : "1.4s",
"retention_deletion_time_millis" : 1404,
"policy_metrics" : {
"daily-snapshots2" : {
"snapshots_taken" : 7,
"snapshots_failed" : 0,
"snapshots_deleted" : 6,
"snapshot_deletion_failures" : 0
},
"daily-snapshots" : {
"snapshots_taken" : 12,
"snapshots_failed" : 0,
"snapshots_deleted" : 12,
"snapshot_deletion_failures" : 6
}
},
"total_snapshots_taken" : 19,
"total_snapshots_failed" : 0,
"total_snapshots_deleted" : 18,
"total_snapshot_deletion_failures" : 6
}
```
This does not yet include HLRC for this, as this commit is quite large on its own. That will be
added in a subsequent commit.
Relates to #43663
* Version qualify serialization
* Initialize counters outside constructor
* Use computeIfAbsent instead of being too verbose
* Move part of XContent generation into subclass
* Fix REST action for master merge
* Unused import
* Record history of SLM retention actions (#45513)
This commit records the deletion of snapshots by the retention component
of SLM into the SLM history index for the purposes of reviewing operations
taken by SLM and alerting.
* Retry SLM retention after currently running snapshot completes (#45802)
* Retry SLM retention after currently running snapshot completes
This commit adds a ClusterStateObserver to wait until the currently
running snapshot is complete before proceeding with snapshot deletion.
SLM retention waits for the maximum allowed deletion time for the
snapshot to complete, however, the waiting time is not factored into
the limit on actual deletions.
Relates to #43663
* Increase timeout waiting for snapshot completion
* Apply patch
From 2374316f0d.patch
* Rename test variables
* [TEST] Be less strict for stats checking
* Skip SLM retention if ILM is STOPPING or STOPPED (#45869)
This adds a check to ensure we take no action during SLM retention if
ILM is currently stopped or in the process of stopping.
Relates to #43663
* Check all actions preventing snapshot delete during retention (#45992)
* Check all actions preventing snapshot delete during retention run
Previously we only checked to see if a snapshot was currently running,
but it turns out that more things can block snapshot deletion. This
changes the check to be a check for:
- a snapshot currently running
- a deletion already in progress
- a repo cleanup in progress
- a restore currently running
This was found by CI where a third party delete in a test caused SLM
retention deletion to throw an exception.
Relates to #43663
* Add unit test for okayToDeleteSnapshots
* Fix bug where SLM retention task would be scheduled on every node
* Enhance test logging
* Ignore if snapshot is already deleted
* Missing import
* Fix SnapshotRetentionServiceTests
* Expose SLM policy stats in get SLM policy API (#45989)
This also adds support for the SLM stats endpoint to the high level rest client.
Retrieving a policy now looks like:
```json
{
"daily-snapshots" : {
"version": 1,
"modified_date": "2019-04-23T01:30:00.000Z",
"modified_date_millis": 1556048137314,
"policy" : {
"schedule": "0 30 1 * * ?",
"name": "<daily-snap-{now/d}>",
"repository": "my_repository",
"config": {
"indices": ["data-*", "important"],
"ignore_unavailable": false,
"include_global_state": false
},
"retention": {}
},
"stats": {
"snapshots_taken": 0,
"snapshots_failed": 0,
"snapshots_deleted": 0,
"snapshot_deletion_failures": 0
},
"next_execution": "2019-04-24T01:30:00.000Z",
"next_execution_millis": 1556048160000
}
}
```
Relates to #43663
* Rewrite SnapshotLifecycleIT as as ESIntegTestCase (#46356)
* Rewrite SnapshotLifecycleIT as as ESIntegTestCase
This commit splits `SnapshotLifecycleIT` into two different tests.
`SnapshotLifecycleRestIT` which includes the tests that do not require
slow repositories, and `SLMSnapshotBlockingIntegTests` which is now an
integration test using `MockRepository` to simulate a snapshot being in
progress.
Relates to #43663Resolves#46205
* Add error logging when exceptions are thrown
* Update serialization versions
* Fix type inference
* Use non-Cancellable HLRC return value
* Fix Client mocking in test
* Fix SLMSnapshotBlockingIntegTests for 7.x branch
* Update SnapshotRetentionTask for non-multi-repo snapshot retrieval
* Add serialization guards for SnapshotLifecyclePolicy
Today we load the metadata from disk while constructing the node. However there
is no real need to do so, and this commit moves that code to run later while
the node is starting instead.
Registering two different http methods on the same path using different
wildcard names would result in the last wildcard name being active only.
Now throw an exception instead.
Closes#46482
The cuckoofilters could be randomly created with too small of
capacity or precision, which means that they can only absorb a few
values before collisions start to make all filters look identical.
This increases the size of filters we generate (capacity >> than
the test cases) and lower fpp rate.
Today when the membership of the cluster changes we log messages that describe
the change like this:
added {{node-1}{OPdaTIGmSxaEXXOyg3o96w}{127.0.0.1}{127.0.0.1:9301}{di},}
The trailing comma suggests there is some missing string that might contain
extra information, but in fact it's an artefact of how these messages are
constructed. This commit removes the trailing comma from these lists.
I couldn't find a test for this, as it seems we only get
into this error handler on a bug. Regardless, we are
executing the snapshot finalization on the master update
thread here which shouldn't happen and will make
debugging a production issue resulting from this
trickier than it has to be (because we probably also
get a cluster state apply is slow warning in addition
to the original bug).
Used the generic pool here instead of the snapshot pool
because we're resolving the user callback here as
well and the generic pool seemed like the safer bet for
that.
Previously, we ignore replication for noop updates because they do not
have sequence numbers. Since #44603, we started assigning sequence
numbers to noop updates leading them to be replicated to replicas.
This bug occurs only on 8.0 for it requires #41065 and #44603.
Closes#46366
Following performance optimisations to the adjacency_matrix aggregation we no longer require this setting. Marked as deprecated and due for removal in 8.0
Related #46324
This is a follow up of #19191 for 7.x.
This change adds a system property called "es.routing.search_ignore_awareness_attributes" that when set to true will
effectively ignore allocation awareness attributes when routing search and get requests. This is now the default in 8.x so this
commit adds a way to opt-in to this new behavior in a minor version of 7.x.
Relates #45735
When the Elasticsearch process does not have write permissions to
upgrade the Elasticsearch keystore, we bail with an error message that
indicates there is a filesystem permissions problem. This commit
clarifies that error message by pointing out the directory where write
permissions are required, or that the user can also run the
elasticsearch-keystore upgrade command manually before starting the
Elasticsearch process. In this case, the upgrade would not be needed at
runtime, so the permissions would not be needed then.
* Support geotile_grid aggregation in composite agg sources (#45810)
Adds support for `geotile_grid` as a source in composite aggs.
Part of this change includes adding a new docFormat of `GEOTILE` that formats a hashed `long` value into a geotile formatting string `zoom/x/y`.
In order to track down #46091:
* Enables debug logging in REST tests for `master` and `coordination` packages
since we suspect that issues are caused by failed and then retried publications
These were actually never intended to be logged at the warning level but made visible by a refactoring in #19991, which introduced a new exception type but forgot to adapt some of the consumers of the exception.
This PR merges the `vectors-optimize-brute-force` feature branch, which makes
the following changes to how vector functions are computed:
* Precompute the L2 norm of each vector at indexing time. (#45390)
* Switch to ByteBuffer for vector encoding. (#45936)
* Decode vectors and while computing the vector function. (#46103)
* Use an array instead of a List for the query vector. (#46155)
* Precompute the normalized query vector when using cosine similarity. (#46190)
Co-authored-by: Mayya Sharipova <mayya.sharipova@elastic.co>
Unfortunately, with this change, we won't clean up all unreferenced
generations when reopening. We assume that there's at most one
unreferenced generation when reopening translog. The previous
implementation guarantees this assumption by syncing translog every time
after we remove a translog reader. This change, however, only syncs
translog once after we have removed all unreferenced readers (can be
more than one) and breaks the assumption.
Closes#46267
This reverts commit fd8183ee51d7cf08d9def58a2ae027714beb60de.
This commit is a follow-up to a change that fixed that multi-get was not
triggering a shard to become search active. In that change, we added a
test that multi-get properly triggers a shard to become search
active. This commit is a follow-up to that change which adds a test for
the get case. While get is already handled correctly in production code,
there was not a test for it. This commit adds one. Additionally, we
factor all the search idle tests from IndexShardIT into a separate test
class, as an effort to keep related tests together instead of a single
large test class containing a jumble of tests, and also to keep test
classes smaller for better parallelization.
Avoid pre-allocating ((N * N) - N) / 2 “BitsIntersector” objects given N filters.
Most adjacency matrices will be sparse and we typically don’t need to allocate all of these objects - can save a lot of allocations when the number of filters is high.
Closes#46212
Previously, we send recovery requests using CancellableThreads because
we send requests and wait for responses in a blocking manner. With async
recovery, we no longer need to do so. Moreover, if we fail to submit a
request, then we can release the Store using an interruptible thread
which can risk invalidating the node lock.
This PR is the first step to avoid forking when releasing the Store.
Relates #45409
Relates #46178
An exception from the DefaultSearchContext constructor could leak a
searcher, causing future issues like shard lock obtained exceptions. The
underlying cause of the exception in the constructor has been fixed, but
as a safety precaution we also fix the exception handling in
createContext.
Closes#45378
If a primary as being relocated, then the global checkpoint and
retention lease background sync can emit unnecessary warning logs.
This side effect was introduced in #42241.
Relates #40800
Relates #42241
When a shard has fallen search idle, and a non-realtime multi-get
request is executed, today such requests do not wait for the shard to
become search active and therefore such requests do not wait for a
refresh to see the latest changes to the index. This also prevents such
requests from triggering the shard as non-search idle, influencing the
behavior of scheduled refreshes. This commit addresses this by attaching
a listener to the shard search active state for multi-get requests. In
this way, when the next scheduled refresh is executed, the multi-get
request will then proceed.
testSyncFailsIfOperationIsInFlight could fail due to the index request
spawing a GCP sync (new since 7.4). Test now waits for it to finish
before testing that flushed sync fails.
With this change, we can avoid blocking writing threads when trimming
unreferenced readers; hence improving the translog writing performance
in async durability mode.
Close#46201
* Wait for all Rec. to Stop on Node Close
* This issue is in the `RecoverySourceHandler#acquireStore`. If we submit the store release to the generic threadpool while it is getting shut down we never complete the futue we wait on (in the generic pool as well) and fail to ever release the store potentially.
* Fixed by waiting for all recoveries to end on node close so that we aways have a healthy thread pool here
* Closes#45956
This is the first PR that merges changes made to server module from
the enrich branch (see #32789) into the master branch.
The plan is to merge changes made to the server module separately from
the pr that will merge enrich into master, so that these changes can
be reviewed in isolation.
When recovering a shard locally, we use a translog snapshot from
newSnapshotFromGen which consists of all readers from a certain
generation. In the test, we use newSnapshotFromMinSeqNo for the
expectation. The snapshot of this method includes only readers
containing operations in the requesting range.
Closes#46022
If a node is misconfigured to talk to remote node HTTP port (instead of
transport port) eventually it will receive an HTTP response from the
remote node on transport port (this happens when a node sends
accidentally line terminating byte in a transport request).
If this happens today it results in a non-friendly log message and a
long stack trace.
This commit adds a check if a malformed response is HTTP response. In
this case, a concise log message would appear.
(cherry picked from commit 911d02b7a9c3ce7fe316360c127a935ca4b11f37)
When a query contains a mandatory clause that doesn't track the max score per
block, we disable the max score optimization. Previously, we were doing this by
wrapping the collector with a FilterCollector that always returned
ScoreMode.COMPLETE.
However we weren't adjusting totalHitsThreshold, so the collector could still
call Scorer#setMinCompetitiveScore. It is against the method contract to call
setMinCompetitiveScore when the score mode is COMPLETE, and some scorers like
ReqOptSumScorer throw an error in this case.
This commit tries to disable the optimization by always setting
totalHitsThreshold to max int, as opposed to wrapping the collector.
Today we might carry on a big merge uncommitted and therefore
occupy a significant amount of diskspace for quite a long time
if for instance indexing load goes down and we are not quickly
reaching the translog size threshold. This change will cause a
flush if we hit a significant merge (512MB by default) which
frees diskspace sooner.
We only sync translog if the given offset hasn't synced yet. We can't
verify the global checkpoint from the latest translog checkpoint unless
a sync has occurred.
Closes#46065
Relates #45634
Today the `DiskThresholdDecider` attempts to account for already-relocating
shards when deciding how to allocate or relocate a shard. Its goal is to stop
relocating shards onto a node before that node exceeds the low watermark, and
to stop relocating shards away from a node as soon as the node drops below the
high watermark.
The decider handles multiple data paths by only accounting for relocating
shards that affect the appropriate data path. However, this mechanism does not
correctly account for _new_ relocating shards, which are unwittingly ignored.
This means that we may evict far too many shards from a node above the high
watermark, and may relocate far too many shards onto a node causing it to blow
right past the low watermark and potentially other watermarks too.
There are in fact two distinct issues that this PR fixes. New incoming shards
have an unknown data path until the `ClusterInfoService` refreshes its
statistics. New outgoing shards have a known data path, but we fail to account
for the change of the corresponding `ShardRouting` from `STARTED` to
`RELOCATING`, meaning that we fail to find the correct data path and treat the
path as unknown here too.
This PR also reworks the `MockDiskUsagesIT` test to avoid using fake data paths
for all shards. With the changes here, the data paths are handled in tests as
they are in production, except that their sizes are fake.
Fixes#45177
Today we assume that document failures can not occur for deletes. This
assumption is bogus, as they can fail for a variety of reasons such as
the Lucene index having reached the document limit. Because of this
assumption, we were asserting that such a document-level failure would
never happen. When this bogus assertion is violated, we fail the node, a
catastrophe. Instead, we need to treat this as a fatal engine exception.
Today we assume that document failures can not occur for no-ops. This
assumption is bogus, as they can fail for a variety of reasons such as
the Lucene index having reached the document limit. Because of this
assumption, we were asserting that such a document-level failure would
never happen. When this bogus assertion is violated, we fail the node, a
catastrophe. Instead, we need to treat this as a fatal engine exception.
Backport of 1a0dddf4ad24b3f2c751a1fe0e024fdbf8754f94 (AKA #445395)
* Add support for a Range field ValuesSource, including decode logic for range doc values and exposing RangeType as a first class enum
* Provide hooks in ValuesSourceConfig for aggregations to control ValuesSource class selection on missing & script values
* Branch aggregator creation in Histogram and DateHistogram based on ValuesSource class, to enable specialization based on type. This is similar to how Terms aggregator works.
* Prioritize field type when available for selecting the ValuesSource class type to use for an aggregation
Searching with `allowPartialSearchResults=false` could still return
partial search results during recovery. If a shard copy fails
with a "shard not available" exception, the failure would be ignored and
a partial result returned. The one case where this is known to happen
is when a shard copy is recovering when searching, since
`IllegalIndexShardStateException` is considered a "shard not available"
exception.
Relates to #42612
Since #45473, we trim translog below the local checkpoint of the safe
commit immediately if soft-deletes enabled. In
testRestoreLocalHistoryFromTranslog, we should have a safe commit after
recoverFromTranslog is called; then we will trim translog files which
contain only operations that are at most the global checkpoint.
With this change, we relax the assertion to ensure that we don't put
operations to translog while recovering history from the local translog.
If two translog syncs happen concurrently, then one can return before
its operations are marked as persisted. In general, this should not be
an issue; however, peer recoveries currently rely on this assumption.
Closes#29161
Today we create new engines under IndexShard#mutex. This is not ideal
because it can block the cluster state updates which also execute under
the same mutex. We can avoid this problem by creating new engines under
a separate mutex.
Closes#43699
This commit starts from the simple premise that the use of node settings
in blob store repositories is a mistake. Here we see that the node
settings are used to get default settings for store and restore throttle
rates. Yet, since there are not any node settings registered to this
effect, there can never be a default setting to fall back to there, and
so we always end up falling back to the default rate. Since this was the
only use of node settings in blob store repository, we move them. From
this, several places fall out where we were chaining settings through
only to get them to the blob store repository, so we clean these up as
well. That leaves us with the changeset in this commit.
This adds a pipeline aggregation that calculates the cumulative
cardinality of a field. It does this by iteratively merging in the
HLL sketch from consecutive buckets and emitting the cardinality up
to that point.
This is useful for things like finding the total "new" users that have
visited a website (as opposed to "repeat" visitors).
This is a Basic+ aggregation and adds a new Data Science plugin
to house it and future advanced analytics/data science aggregations.
Backport of #45799
This PR modifies the logic in IngestService to preserve the original content type
on the IndexRequest, such that when a document with a content type like SMILE
is submitted to a pipeline, the resulting document that is persisted will remain in
the original content type (SMILE in this case).
This is essentially the same issue fixed in #43362 but for http request
version instead of the request method. We have to deal with the
case of not being able to parse the request version, otherwise
channel closing fails.
Fixes#43850
The snapshot status when blocking can still be INIT in rare cases when
the new cluster state that has the snapshot in `STARTED` hasn't yet
become visible.
Fixes#45917
This commit enhances logging for 2 cases:
1. If non-TLS enabled node receives transport message from TLS enabled
node on transport port.
2. If non-TLS enabled node receives HTTPs request on transport port.
(cherry picked from commit 4f52ebd32eb58526b4c8022f8863210bf88fc9be)
Closing a `RemoteClusterConnection` concurrently with trying to connect
could result in double invoking the listener.
This fixes
RemoteClusterConnectionTest#testCloseWhileConcurrentlyConnecting
Closes#45845
In case of an in-progress snapshot this endpoint was broken because
it tried to execute repository operations in the callback on a
transport thread which is not allowed (only generic or snapshot
pool are allowed here).
This commit namespaces the existing processors setting under the "node"
namespace. In doing so, we deprecate the existing processors setting in
favor of node.processors.
Since #45136, we use soft-deletes instead of translog in peer recovery.
There's no need to retain extra translog to increase a chance of
operation-based recoveries. This commit ignores the translog retention
policy if soft-deletes is enabled so we can discard translog more
quickly.
Backport of #45473
Relates #45136
Today, when rolling a new translog generation, we block all write
threads until a new generation is created. This choice is perfectly
fine except in a highly concurrent environment with the translog
async setting. We can reduce the blocking time by pre-sync the
current generation without writeLock before rolling. The new step
would fsync most of the data of the current generation without
blocking write threads.
Close#45371
Follow up on #32806.
The system property es.http.cname_in_publish_address is deprecated
starting from 7.0.0 and deprecation warning should be added if the
property is specified.
This PR will go to 7.x and master.
Follow-up PR to remove es.http.cname_in_publish_address property
completely will go to the master.
(cherry picked from commit a5ceca7715818f47ec87dd5f17f8812c584b592b)
* There is no point in listing out every shard over and over when the `index-N` blob in the shard contains a list of all the files
* Rebuilding the `index-N` from the `snap-${uuid}.dat` blobs does not provide any material benefit. It only would in the corner case of a corrupted `index-N` but otherwise uncorrupted blobs since we neither check the correctness of the content of all segment blobs nor do we do a similar recovery at the root of the repository.
* Also, at least in version `6.x` we only mark a shard snapshot as successful after writing out the updated `index-N` blob so all snapshots that would work with `7.x` and newer must have correct `index-N` blobs
=> Removed the rebuilding of the `index-N` content from `snap-${uuid}.dat` files and moved to only listing `index-N` when taking a snapshot instead of listing all files
=> Removed check of file existence against physical blob listing
=> Kept full listing on the delete side to retain full cleanup of blobs that aren't referenced by the `index-N`
This PR introduces a mechanism to cancel a search task when its corresponding connection gets closed. That would relief users from having to manually deal with tasks and cancel them if needed. Especially the process of finding the task_id requires calling get tasks which needs to call every node in the cluster.
The implementation is based on associating each http channel with its currently running search task, and cancelling the task when the previously registered close listener gets called.
Today we can release a Store using CancellableThreads. If we are holding
the last reference, then we will verify the node lock before deleting
the store. Checking node lock performs some I/O on FileChannel. If the
current thread is interrupted, then the channel will be closed and the
node lock will also be invalid.
Closes#45237
* Add is_write_index column to cat.aliases (#44772)
Aliases have had the option to set `is_write_index` since 6.4,
but the cat.aliases action was never updated.
* correct version bounds to 7.4
Most of our CLI tools use the Terminal class, which previously did not provide methods for writing to standard output. When all output goes to standard out, there are two basic problems. First, errors and warnings are "swallowed" in pipelines, making it hard for a user to know when something's gone wrong. Second, errors and warnings are intermingled with legitimate output, making it difficult to pass the results of interactive scripts to other tools.
This commit adds a second set of print commands to Terminal for printing to standard error, with errorPrint corresponding to print and errorPrintln corresponding to println. This leaves it to developers to decide which output should go where. It also adjusts existing commands to send errors and warnings to stderr.
Usage is printed to standard output when it's correctly requested (e.g., bin/elasticsearch-keystore --help) but goes to standard error when a command is invoked incorrectly (e.g. bin/elasticsearch-keystore list-with-a-typo | sort).
* Repository Cleanup Endpoint (#43900)
* Snapshot cleanup functionality via transport/REST endpoint.
* Added all the infrastructure for this with the HLRC and node client
* Made use of it in tests and resolved relevant TODO
* Added new `Custom` CS element that tracks the cleanup logic.
Kept it similar to the delete and in progress classes and gave it
some (for now) redundant way of handling multiple cleanups but only allow one
* Use the exact same mechanism used by deletes to have the combination
of CS entry and increment in repository state ID provide some
concurrency safety (the initial approach of just an entry in the CS
was not enough, we must increment the repository state ID to be safe
against concurrent modifications, otherwise we run the risk of "cleaning up"
blobs that just got created without noticing)
* Isolated the logic to the transport action class as much as I could.
It's not ideal, but we don't need to keep any state and do the same
for other repository operations
(like getting the detailed snapshot shard status)
This change adds a new option called user_dictionary_rules to
Kuromoji's tokenizer. It can be used to set additional tokenization rules
to the Japanese tokenizer directly in the settings (instead of using a file).
This commit also adds a check that no rules are duplicated since this is not allowed
in the UserDictionary.
Closes#25343
Backports PR #45737:
Similar to PR #45030 integration test testDontCacheScripts() was moved to unit test AvgAggregatorTests#testDontCacheScripts.
AvgIT class was removed.
If the background refresh is running, but not finished yet then the
document might not be visible to the next search. Thus, if
scheduledRefresh returns false, we need to wait until the background
refresh is done.
Closes#45571
`OsProbe` fetches cgroup data from the filesystem, and has asserts that
check for missing values. This PR changes most of these asserts into
runtime checks, since at least one user has reported an NPE where
a piece of cgroup data was missing.
Backport of #45606 to 7.x.
If a scheduled task of an AbstractAsyncTask starts after it was closed,
then isScheduledOrRunning can remain true forever although no task is
running or scheduled.
Closes#45576
The elasticsearch keystore was originally backed by a PKCS#12 keystore, which had several limitations. To overcome some of these limitations in encoding, the setting names existing within the keystore were limited to lowercase alphanumberic (with underscore). Now that the keystore is backed by an encrypted blob, this restriction is no longer relevant. This commit relaxes that restriction by allowing uppercase ascii characters as well.
closes#43835
Changes the order of parameters in Geometries from lat, lon to lon, lat
and moves all Geometry classes are moved to the
org.elasticsearch.geomtery package.
Backport of #45332Closes#45048
This commit adds an explicit error message when a create index request
contains a settings key that is not a json object. Prior to this change
the user would be given a ClassCastException with no explanation of what
went wrong.
closes#45126
The current idiom is to have the InternalAggregator find all the
buckets sharing the same key, put them in a list, get the first bucket
and ask that bucket to reduce all the buckets (including itself).
This a somewhat confusing workflow, and feels like the aggregator should
be reducing the buckets (since the aggregator owns the buckets), rather
than asking one bucket to do all the reductions.
This commit basically moves the `Bucket.reduce()` method to the
InternalAgg and renames it `reduceBucket()`. It also moves the
`createBucket()` (or equivalent) method from the bucket to the
InternalAgg as well.
This commit adds CNAME reporting for transport.publish_address same way
it's done for http.publish_address.
Relates #32806
Relates #39970
(cherry picked from commit e0a2558a4c3a6b6fbfc6cd17ed34a6f6ef7b15a9)
* Since we're buffering network reads to the heap and then deserializing them it makes no sense to buffer a message that is 90% of the heap size since we couldn't deserialize it anyway
* I think `30%` is a more reasonable guess here given that we can reasonably assume that the deserialized message will be larger than the serialized message itself and processing it will take additional heap as well
When a persistent task attempts to register an allocated task locally,
this creates the Task object and starts tracking it locally. If there
is a failure while initializing the task, this is handled by a catch
and subsequent error handling (canceling, unregistering, etc).
But if the task fails to be created because an exception is thrown
in the tasks ctor, this is uncaught and fails the cluster update
thread. The ramification is that a persistent task remains in the
cluster state, but is unable to create the allocated task, and the
exception prevents other tasks "after" the poisoned task from starting
too.
Because the allocated task is never created, the cancellation tools
are not able to remove the persistent task and it is stuck as a
zombie in the CS.
This commit adds exception handling around the task creation,
and attempts to notify the master if there is a failure (so the
persistent task can be removed). Even if this notification fails,
the exception handling means the rest of the uninitialized tasks
can proceed as normal.
* Painless generates a ton of duplicate strings and empty `Hashmap` instances wrapped as unmodifiable
* This change brings down the static footprint of Painless on an idle node by 20MB (after running the PMC benchmark against said node)
* Since we were looking into ways of optimizing for smaller node sizes I think this is a worthwhile optimization
Moves methods added in #44213 and uses them to configure the port range
for `ExternalTestCluster` too.
These were still using `9300-9400` ( teh default ) and running into
races.
* Fixing this for two reasons:
1. Why not verify that the seed we wrote is actually there when we can
2. The AWS S3 SDK started to log a bunch of WARN messages about not fully reading the stream now that we started to abuse the read blob as an `exists` check after removing that method from the blob container
* Introduce Spatial Plugin (#44389)
Introduce a skeleton Spatial plugin that holds new licensed features coming to
Geo/Spatial land!
* [GEO] Refactor DeprecatedParameters in AbstractGeometryFieldMapper (#44923)
Refactor DeprecatedParameters specific to legacy geo_shape out of
AbstractGeometryFieldMapper.TypeParser#parse.
* [SPATIAL] New ShapeFieldMapper for indexing cartesian geometries (#44980)
Add a new ShapeFieldMapper to the xpack spatial module for
indexing arbitrary cartesian geometries using a new field type called shape.
The indexing approach leverages lucene's new XYShape field type which is
backed by BKD in the same manner as LatLonShape but without the WGS84
latitude longitude restrictions. The new field mapper builds on and
extends the refactoring effort in AbstractGeometryFieldMapper and accepts
shapes in either GeoJSON or WKT format (both of which support non geospatial
geometries).
Tests are provided in the ShapeFieldMapperTest class in the same manner
as GeoShapeFieldMapperTests and LegacyGeoShapeFieldMapperTests.
Documentation for how to use the new field type and what parameters are
accepted is included. The QueryBuilder for searching indexed shapes is
provided in a separate commit.
* [SPATIAL] New ShapeQueryBuilder for querying indexed cartesian geometry (#45108)
Add a new ShapeQueryBuilder to the xpack spatial module for
querying arbitrary Cartesian geometries indexed using the new shape field
type.
The query builder extends AbstractGeometryQueryBuilder and leverages the
ShapeQueryProcessor added in the previous field mapper commit.
Tests are provided in ShapeQueryTests in the same manner as
GeoShapeQueryTests and docs are updated to explain how the query works.
* It's in the title, follow up to #45233
* Flatten more listeners into `StepListener`
* Remove duplication from repo and index bootstrap and asserting that the steps execute successfully
* If `counter.onResult` throws an exception we might leak a transport task because the failure is not handled as a phase failure (instead it bubbles up in the transport service eventually hitting the `onFailure` callback again and couting down the `counter` twice).
Co-authored-by: Jim Ferenczi <jim.ferenczi@elastic.co>
Currently, when adding a new mapping, we attempt to parse + merge it before
checking whether its top-level document type matches the existing type. So when
a user attempts to introduce a new mapping type, we may give a confusing error
message around merging instead of complaining that it's not possible to add
more than one type ("Rejecting mapping update to [my-index] as the final
mapping would have more than 1 type...").
This PR moves the type validation to the start of
`MetaDataMappingService#applyRequest` so that we make sure the type matches
before performing any mapper merging.
We already partially addressed this issue in #29316, but the tests there
focused on `MapperService` and did not catch this problem with end-to-end
mapping updates.
Addresses #43012.
We accidentally introduced this bug when adding a typeless version of the
rollover request. The bug is not present if include_type_name is set to true.
The previous hasProcessors method would validate if a processor was
present within a pipeline, but would not return the contents of the
processors. This does not allow a consumer to inspect the processor for
specific metadata. The method now returns the list of processors based
on the class of the processor passed in.
Because auto-date-histo can perform multiple reductions while
merging buckets, we need to ensure that the intermediate reductions
are done with a `finalReduce` set to false to prevent Pipeline aggs
from generating their output.
Once all the buckets have been merged and the output is stable,
a mostly-noop reduction can be performed which will allow pipelines
to generate their output.
This commit makes sure that mapping parameters to `CreateIndex` and
`PutIndexTemplate` are keyed by the type name.
`IndexCreationTask` expects mappings to be keyed by the type name.
It asserts this for template mappings but not for the mappings in the request.
The `CreateIndexRequest` and `RestCreateIndexAction` mostly make it sure
that the mapping is keyed by a type name, but not always.
When building the create-index request outside of the REST handler, there are
a few methods to set the mapping for the request. Some of them add the type
name some of them do not.
For example, `CreateIndexRequest#mapping(String type, Map<String, ?> source)`
adds the type name, but
`CreateIndexRequest#mapping(String type, XContentBuilder source)` does not.
This PR asserts the type name in the request mapping inside `IndexCreationTask`
and makes all `CreateIndexRequest#mapping` methods add the type name.
testShouldFlushAfterPeerRecovery was added #28350 to make sure the
flushing loop triggered by afterWriteOperation eventually terminates.
This test relies on the fact that we call afterWriteOperation after
making changes in translog. In #44756, we roll a new generation in
RecoveryTarget#finalizeRecovery but do not call afterWriteOperation.
Relates #28350
Relates #45073
Today, if an operation-based peer recovery occurs, we won't trim
translog but leave it as is. Some unacknowledged operations existing in
translog of that replica might suddenly reappear when it gets promoted.
With this change, we ensure trimming translog above the starting
sequence number of phase 2. This change can allow us to read translog
forward.
* Follow up to #44949
* Stop using a special code path for multi-line JSON and instead handle its detection like that of other XContent types when creating the request
* Only leave a single path that holds a reference to the full REST request
* In the next step we can move the copying of request content to happen before the actual request handling and make it conditional on the handler in question to stop copying bulk requests as suggested in #44564
* Reduces complicated callback relations in `testSuccessfulSnapshotAndRestore` to flat steps of sequential actions
* Will refactor the other tests in this suit as a follow up
* This format certainly makes it easier to create more complicated tests that involve multiple subsequent snapshots as it would allow adding loops
When having a cluster state from 6.x, display the metadata version as the cluster state version.
Avoids confusion where a cluster state from 6.x is displayed as version 0 even if has some actual
content.
Currently the msearch api is used to execute buffered search requests;
however the msearch api doesn't deal with search requests in an intelligent way.
It basically executes each search separately in a concurrent manner.
This api reuses the msearch request and response classes and executes
the searches as one request in the node holding the enrich index shard.
Things like engine.searcher and query shard context are only created once.
Also there are less layers than executing a regular msearch request. This
results in an interesting speedup.
Without this change, in a single node cluster, enriching documents
with a bulk size of 5000 items, the ingest time in each bulk response
varied from 174ms to 822ms. With this change the ingest time in each
bulk response varied from 54ms to 109ms.
I think we should add a change like this based on this improvement in ingest time.
However I do wonder if instead of doing this change, we should improve
the msearch api to execute more efficiently. That would be more complicated
then this change, because in this change the custom api can only search
enrich index shards and these are special because they always have a single
primary shard. If msearch api is to be improved then that should work for
any search request to any indices. Making the same optimization for
indices with more than 1 primary shard requires much more work.
The current change is isolated in the enrich plugin and LOC / complexity
is small. So this good enough for now.
Today if a shard is not fully allocated we maintain a retention lease for a
lost peer for up to 12 hours, retaining all operations that occur in that time
period so that we can recover this replica using an operations-based recovery
if it returns. However it is not always reasonable to perform an
operations-based recovery on such a replica: if the replica is a very long way
behind the rest of the replication group then it can be much quicker to perform
a file-based recovery instead.
This commit introduces a notion of "reasonable" recoveries. If an
operations-based recovery would involve copying only a small number of
operations, but the index is large, then an operations-based recovery is
reasonable; on the other hand if there are many operations to copy across and
the index itself is relatively small then it makes more sense to perform a
file-based recovery. We measure the size of the index by computing its number
of documents (including deleted documents) in all segments belonging to the
current safe commit, and compare this to the number of operations a lease is
retaining below the local checkpoint of the safe commit. We consider an
operations-based recovery to be reasonable iff it would involve replaying at
most 10% of the documents in the index.
The mechanism for this feature is to expire peer-recovery retention leases
early if they are retaining so much history that an operations-based recovery
using that lease would be unreasonable.
Relates #41536
CellIdSource is a helper ValuesSource that encodes GeoPoint
into a long-encoded representation of the grid bucket the point
is associated with. This complicates thing as usage evolves to
support shapes that are associated with more than one bucket ordinal.
Today the test waits for one of the shards to be blocked, but this does not
mean that the block has been applied on all nodes, so a subsequent indexing
operation may still go through.
Fixes#45338
The client and remote hit sources had each their own retry mechanism,
which would do the same. Supporting resiliency we would have to expand
on the retry mechanisms and as a preparation for that, the retry
mechanism is now shared such that each sub class is only responsible for
sending requests and converting responses/failures to common format.
Part of #42612
Refreshes happening during indexing can result differen segment counts and
slightly skewed term statistics, which in turn has the potential to change
suggestion output slightly. In order to prevent this, disable refresh for the
affected tests.
Closes#43261
`newSearcher()` from lucene can randomly choose index readers which
are not compatible with our tests, like ParallelCompositeReader.
The `newIndexSearcher()` method on AggregatorTestCase is a wrapper
similar to newSearcher but compatible with our tests
This commit adds a helper method to the ingest service allowing it to
inspect a pipeline by id and verify the existence of a processor in the
pipeline. This work exposed a potential bug in that some processors
contain inner processors that are passed in at instantiation. These
processors needed a common way to expose their inner processors, so the
WrappingProcessor was created in order to expose the inner processor.
If a node exceeds the flood-stage disk watermark then we add a block to all of
its indices to prevent further writes as a last-ditch attempt to prevent the
node completely exhausting its disk space. However today this block remains in
place until manually removed, and this block is a source of confusion for users
who current have ample disk space and did not even realise they nearly ran out
at some point in the past.
This commit changes our behaviour to automatically remove this block when a
node drops below the high watermark again. The expectation is that the high
watermark is some distance below the flood-stage watermark and therefore the
disk space problem is truly resolved.
Fixes#39334
The reason field of DefaultShardOperationFailedException is lost during serialization.
This is sad because this field is checked for nullity during xcontent generation and it
means that the cause won't be included in the generated xcontent and won't be
printed in two REST API responses (Close Index API and Indices Shard Stores API).
This commit simply restores the reason from the cause during deserialization.
Adds a tighter threshold for logging a warning about slowness in the
`MasterService` instead of relying on the cluster service's 30-second warning
threshold. This new threshold applies to the computation of the cluster state
update in isolation, so we get a warning if computing a new cluster state
update takes longer than 10 seconds even if it is subsequently applied quickly.
It also applies independently to the length of time it takes to notify the
cluster state tasks on completion of publication, in case any of these
notifications holds up the master thread for too long.
Relates #45007
Backport of #45086
This commit adds a deprecation warning in 7.x for the Force Merge API
when both only_expunge_deletes and max_num_segments are set in a request.
Relates #44761
This commit applies a normalization process to environment paths, both
in how they are stored internally, also their settings values. This
normalization is done via two means:
- we make the paths absolute
- we remove redundant name elements from the path (what Java calls
"normalization")
This change ensures that when we compare and refer to these paths within
the system, we are using a common ground. For example, prior to the
change if the data path was relative, we would not compare it correctly
to paths from disk usage. This is because the paths in disk usage were
being made absolute.
Uses JDK 11's per-socket configuration of TCP keepalive (supported on Linux and Mac), see
https://bugs.openjdk.java.net/browse/JDK-8194298, and exposes these as transport settings.
By default, these options are disabled for now (i.e. fall-back to OS behavior), but we would like
to explore whether we can enable them by default, in particular to force keepalive configurations
that are better tuned for running ES.
This adjusts the `buckets_path` parser so that pipeline aggs can
select specific buckets (via their bucket keys) instead of fetching
the entire set of buckets. This is useful for bucket_script in
particular, which might want specific buckets for calculations.
It's possible to workaround this with `filter` aggs, but the workaround
is hacky and probably less performant.
- Adjusts documentation
- Adds a barebones AggregatorTestCase for bucket_script
- Tweaks AggTestCase to use getMockScriptService() for reductions and
pipelines. Previously pipelines could just pass in a script service
for testing, but this didnt work for regular aggs. The new
getMockScriptService() method fixes that issue, but needs to be used
for pipelines too. This had a knock-on effect of touching MovFn,
AvgBucket and ScriptedMetric
Introduce shift field to MovingFunction aggregation.
By default, shift = 0. Behavior, in this case, is the same as before.
Increasing shift by 1 moves starting window position by 1 to the right.
To simply include current bucket to the window, use shift = 1
For center alignment (n/2 values before and after the current bucket), use shift = window / 2
For right alignment (n values after the current bucket), use shift = window.
* Resolve TODO in `readString` by moving to reading chunks of `byte[]` instead of going byte by byte
* Motivated by `readString` showing up as a significant user of CPU time on the IO thread in Rally PMC benchmark
* Benchmarking this:
* Could not reproduce a slowdown in the potential worst case (one or two non-ascii chars) since in this case the cost of creating the string itself exceeds the read times anyway
* Speedup for 50%+ for reading 200 char ascii strings from `ByteBuf` or pages bytes backed streams
* Longer strings obviously get bigger speedups
* More ascii chars -> more speedup
This commit switches to using the full hash to build into the JAR
manifest, which is used in node startup and the REST main action to
display the build hash.
Currently in the transport-nio work we connect and bind channels on the
a thread before the channel is registered with a selector. Additionally,
it is at this point that we set all the socket options. This commit
moves these operations onto the event-loop after the channel has been
registered with a selector. It attempts to set the socket options for a
non-server channel at registration time. If that fails, it will attempt
to set the options after the channel is connected. This should fix
#41071.
Introduce shift field to MovingFunction aggregation.
By default, shift = 0. Behavior, in this case, is the same as before.
Increasing shift by 1 moves starting window position by 1 to the right.
To simply include current bucket to the window, use shift = 1
For center alignment (n/2 values before and after the current bucket), use shift = window / 2
For right alignment (n values after the current bucket), use shift = window.
Today we recover a replica by copying operations from the primary's translog.
However we also retain some historical operations in the index itself, as long
as soft-deletes are enabled. This commit adjusts peer recovery to use the
operations in the index for recovery rather than those in the translog, and
ensures that the replication group retains enough history for use in peer
recovery by means of retention leases.
Reverts #38904 and #42211
Relates #41536
Backport of #45136 to 7.x.
* Stop Passing Around REST Request in Multiple Spots
* Motivated by #44564
* We are currently passing the REST request object around to a large number of places. This works fine since we simply copy the full request content before we handle the rest itself which is needlessly hard on GC and heap.
* This PR removes a number of spots where the request is passed around needlessly. There are many more spots to optimize in follow-ups to this, but this one would already enable bypassing the request copying for some error paths in a follow up.
Sparse role queries are executed differently than other queries in order
to account for the fact that most of the documents are filtered from search.
However this special execution does not set the scorer for the query so any
collector that needs to access the score of a document fails with an NPE.
This change fixed this bug by setting the scorer before collecting any hits
when intersecting the main query and the sparse role.
The Settings#processSetting method is intended to take a setting map and add a
setting to it, adjusting the keys as it goes in case of "conflicts" where the
new setting implies an object where there is currently a string, or vice
versa. processSetting was failing in two cases: adding a setting two levels
under a string, and adding a setting two levels under a string and four levels
under a map. This commit fixes the bug and adds test coverage for the
previously faulty edge cases.
* fix issue #43791 about settings
* add unit test in testProcessSetting()
We keep adding the current primary term to operations for which we do not assign a sequence
number. This does not make sense anymore as all operations which we care about have
sequence numbers now. The goal of this commit is to clean things up in InternalEngine and
reduce the complexity.
* There's no need to have the trie iterator hold another reference to the request object (which could be huge, see #44564)
* Also removed unused boolean field from trie node
Previously, we use ThreadPoolStats to ensure that the scheduledRefresh
triggered by the internal refresh setting update is executed before we
index a new document. With that change (#40387), this test did not fail for
the last 3 months. However, using ThreadPoolStats is not entirely watertight
as both "active" and "queue" count can be 0 in a very small interval
when ThreadPoolExecutor pulls a task from the queue but before marking
the corresponding worker as active (i.e., lock it).
Closes#39565
Adds a `waitForEvents(Priority.LANGUID)` to the cluster health request in
`ESIntegTestCase#waitForRelocation()` to deal with the case that this health
request returns successfully despite the fact that there is a pending reroute task which
will relocate another shard.
Relates #44433Fixes#45003
David Turner
Julie Tibshirani
Jim Ferenczi
Eray
Armin Braun
Martijn van Groningen
Jason Tedor
Yannick Welsch
Tanguy Leroux
Christos Soulios
Andrei Dan
Nhat Nguyen
Zachary Tong
Igor Motov
Ryan Ernst
William Brafford
Christoph Büscher
Lee Hinman
Mayya Sharipova
Henning Andersen
markharwood
Yunfeng,Wu
Paul Sanwald
Benjamin Trent
dengweisysu
Anup
Andrey Ershov
Simon Willnauer
Tal Levy
Mark Tozzi
James Baiera
Alexander Reelsen
dengweisysu
Jake Landis
Luca Cavanna
Christos Soulios
Rory Hunter
Vega
Alpar Torok
Nick Knize
Michael Basnight
Albert Zaharovits
Dimitris Athanasiou
Bukhtawar
Tim Brooks
Nikita Glashenko