This fixes an issue where if the field for the aggregation was unmapped the extended bounds would get dropped and the resulting buckets would not cover the extended bounds requested.
Closes#14735
This commit removes all noreleases and cuts over to Lucene 5.4 GeoPointField type. Included are randomized testing updates to unit and integration test suites for ensuring full backward compatability with existing geo_point indexes.
Transitive dependencies can be confusing and hard to deal with when
conflicts arise between them. This change removes transitive
dependencies from elasticsearch, and forces any dependency conflicts to
be resolved manually, instead of automatically by gradle.
closes#14627
`AbstractLegacyBlobContainer` was kept for historical reasons (see #13434).
We can migrate Azure and S3 repositories to use the new methods added in #13434 so we can remove `AbstractLegacyBlobContainer` class.
Some dependencies must be specified in a couple places in the build.
e.g. randomized runner is specified both in buildSrc (for the gradle
wrapper plugin), as well as in the test-framework.
This change creates buildSrc/versions.properties which acts similar to
the set of shared version properties we used to have in the maven parent
pom.
The documentation says we support EPUB, but the parser is not enabled.
This parser does not require any external dependencies, so I think its ok?
Separately, test-framework drags in an ancient commons-codec (via httpclient), which gradle
"upgrades", but IDEs can't handle this case and just hit jar hell. So just wire that to 1.9,
this allows running tests in the IDE for this plugin.
The plugin name currently defaults to the gradle project name. But the
gradle project name for standalone repo (like an external plugin would
be) defaults to the directory name of the repo. This is trappy, since it
depends on how the repo was checked out.
This change enforces the plugin name is always set.
closes#14603
Random code shouldn't be listening on sockets elsewhere.
Today its the wild west, but we only need to grant access to what the user configured.
This means e.g. multicast plugin has to declare its intentions in its security.policy
Closes#14549
When GroovySecurityTests are run before any other test using
time zones, joda ZoneInfoProvider fails to load the time zones
correctly and never tries again later. This makes sure we load it
correctly on startup.
Relates to #14524
This was basically a resurrected form of the tests for the old sandbox.
We use it to check that groovy scripts some degree of additional containment.
The other scripting plugins (javascript, python) already have this as a unit test,
its much easier to debug any problems that way.
closes#14484
the current jar is over 3 years old, we should upgrade it for bugfixes.
the current integration could be more secure: set a global policy and enforce additional (compile-time) checks
closes#14466
Removes the mapping transform feature which when used made debugging very
difficult. Users should transform their documents on the way into
Elasticsearch rather than having Elasticsearch do it.
Closes#12674
This change moves all the analysis component registration to the node level
and removes the significant API overhead to register tokenfilter, tokenizer,
charfilter and analyzer. All registration is done without guice interaction such
that real factories via functional interfaces are passed instead of class objects
that are instantiated at runtime.
This change also hides the internal analyzer caching that was done previously in the
IndicesAnalysisService entirely and decouples all analysis registration and creation
from dependency injection.
This change removes the leftover pom files. A couple files were left for
reference, namely in qa tests that have not yet been migrated (vagrant
and multinode). The deb and rpm assemblies also still exist for
reference when finishing their setup in gradle.
See #13930
Closes#14353
Squashed commit of the following:
commit edae0729f71ea3d3f9fa9c0d27c9effc042eb5a9
Author: Robert Muir <rmuir@apache.org>
Date: Thu Oct 29 14:13:42 2015 -0400
update sha1 and simplify test
commit 635c4f245d66ad353a16267c810e02b725553fad
Author: Robert Muir <rmuir@apache.org>
Date: Thu Oct 29 07:01:26 2015 -0400
Add threadgroup isolation.
Code with `modifyThread` and `modifyThreadGroup` may only modify
its own threadgroup (or an ancestor of that). This enforces
what is intended by the ThreadGroup class.
This has two immediate implications:
1. Code without these permissions (scripts) may not create or mess with threads
2. ES application threads cannot mess with Java system threads
ES puts all application threads in one single group today, but in the future
this can be organized better, and we will have more isolation in the system.
Similarly to what we did with the search api, we can now also move query parsing on the coordinating node for the explain api. Given that the explain api is a single shard operation (compared to search which is instead a broadcast operation), this doesn't change a lot in how the api works internally. The main benefit is that we can simplify the java api by requiring a structured query object to be provided rather than a bytes array that will get parsed on the data node. Previously if you specified a QueryBuilder it would be serialized in json format and would get reparsed on the data node, while now it doesn't go through parsing anymore (as expected), given that after the query-refactoring we are able to properly stream queries natively.
Closes#14270
We have two types of parse methods for queries: one for the inner query, to be used once the parser is positioned within the query element, and one for the whole query source, including the query element that wraps the actual query.
With the search refactoring we ended up using the former in count, cat count and delete by query, whereas we should have used the former. It ends up working properly given that we have a registered (deprecated) query called "query", which used to allow to wrap a filter into a query, but this has the following downsides:
1) prevents us from removing the deprecated "query" query
2) we end up supporting a top level query that is not wrapped within a query element (pre 1.0 syntax iirc that shouldn't be supported anymore)
This commit finally removes the "query" query and fixes the related parsing bugs. We also had some tests that were providing queries in the wrong format, those have been fixed too.
Closes#13326Closes#14304
This commit brings all the registration etc. from IndexCacheModule into
IndexModule. As a side-effect to remove a circular dependency between
IndicesService and IndicesWarmer this commit also cleans up IndicesWarmer and
separates the Engine from the warmer.
* Allow for multiple host specifications (e.g. _en0_,192.168.1.2,_site_).
* Add _site_ and _global_ scopes as counterparts to _local_.
* Warn on heuristic selection of publish address.
* Remove the arbitrary _non_loopback_ setting.
Closes#13954
The @IndexSettings annoationat has been used to differentiate between node-level
and index level settings. It was also decoupled from realtime-updates such that
the settings object that a class got injected when it was created was static and
not subject to change when an update was applied. This change removes the annoation
and replaces it with a full-fledged class that adds type-safety and encapsulates additional
functionality as well as checks on the settings.
Numeric and boolean fields have doc values enabled by default as of
elasticsearch 2.0. This commit removes support for uninverted/in-memory
fielddata, as well as numeric fields encoded in binary doc values which was
the way that elasticsearch stored doc values in a Lucene index before the
1.4 release.
As a consequence, you will only be able to sort and aggregate on numeric and
boolean fields in Elasticsearch 3.0 if doc values have not been switched off.
There are three ways `@Test` was used. Way one:
```java
@Test
public void flubTheBlort() {
```
This way was always replaced with:
```java
public void testFlubTheBlort() {
```
Or, maybe with a better method name if I was feeling generous.
Way two:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
methodThatThrows();
}
```
This way of using `@Test` is actually pretty OK, but to get the tools to ban
`@Test` entirely it can't be used. Instead:
```java
public void testFoo() {
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
This is longer but tests more than the old ways and is much more precise.
Compare:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
methodThatThrows();
code(); // <---- This was left here by mistake and is never called
}
```
to:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
The final use of test is:
```java
@Test(timeout=1000)
public void testFoo() {
methodThatWasSlow();
}
```
This is the most insidious use of `@Test` because its tempting but tragically
flawed. Its flaws are:
1. Hard and fast timeouts can look like they are asserting that something is
faster and even do an ok job of it when you compare the timings on the same
machine but as soon as you take them to another machine they start to be
invalid. On a slow VM both the new and old methods fail. On a super-fast
machine the slower and faster ways succeed.
2. Tests often contain slow `assert` calls so the performance of tests isn't
sure to predict the performance of non-test code.
3. These timeouts are rude to debuggers because the test just drops out from
under it after the timeout.
Confusingly, timeouts are useful in tests because it'd be rude for a broken
test to cause CI to abort the whole build after it hits a global timeout. But
those timeouts should be very very long "backstop" timeouts and aren't useful
assertions about speed.
For all its flaws `@Test(timeout=1000)` doesn't have a good replacement __in__
__tests__. Nightly benchmarks like http://benchmarks.elasticsearch.org/ are
useful here because they run on the same machine but they aren't quick to check
and it takes lots of time to figure out the regressions. Sometimes its useful
to compare dueling implementations but that requires keeping both
implementations around. All and all we don't have a satisfactory answer to the
question "what do you replace `@Test(timeout=1000)`" with. So we handle each
occurrence on a case by case basis.
For files with `@Test` this also:
1. Removes excess blank lines. They don't help anything.
2. Removes underscores from method names. Those would fail any code style
checks we ever care to run and don't add to readability. Since I did this manually
I didn't do it consistently.
3. Make sure all test method names start with `test`. Some used to end in `Test` or start
with `verify` or `check` and they were picked up using the annotation. Without the
annotation they always need to start with `test`.
4. Organizes imports using the rules we generate for Eclipse. For the most part
this just removes `*` imports which is a win all on its own. It was "required"
to quickly remove `@Test`.
5. Removes unneeded casts. This is just a setting I have enabled in Eclipse and
forgot to turn off before I did this work. It probably isn't hurting anything.
6. Removes trailing whitespace. Again, another Eclipse setting I forgot to turn
off that doesn't hurt anything. Hopefully.
7. Swaps some tests override superclass tests to make them empty with
`assumeTrue` so that the reasoning for the skips is logged in the test run and
it doesn't "look like" that thing is being tested when it isn't.
8. Adds an oxford comma to an error message.
The total test count doesn't change. I know. I counted.
```bash
git checkout master && mvn clean && mvn install | tee with_test
git no_test_annotation master && mvn clean && mvn install | tee not_test
grep 'Tests summary' with_test > with_test_summary
grep 'Tests summary' not_test > not_test_summary
diff with_test_summary not_test_summary
```
These differ somewhat because some tests are skipped based on the random seed.
The total shouldn't differ. But it does!
```
1c1
< [INFO] Tests summary: 564 suites (1 ignored), 3171 tests, 31 ignored (31 assumptions)
---
> [INFO] Tests summary: 564 suites (1 ignored), 3167 tests, 17 ignored (17 assumptions)
```
These are the core unit tests. So we dig further:
```bash
cat with_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > with_test_suites
cat not_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > not_test_suites
diff <(sort with_test_suites) <(sort not_test_suites)
```
The four tests with lower test numbers are all extend `AbstractQueryTestCase`
and all have a method that looks like this:
```java
@Override
public void testToQuery() throws IOException {
assumeTrue("test runs only when at least a type is registered", getCurrentTypes().length > 0);
super.testToQuery();
}
```
It looks like this method was being double counted on master and isn't anymore.
Closes#14028
The NotQueryBuilder has been deprecated on the 2.x branches
and can be removed with the next major version. It can be
replaced by boolean query with added mustNot() clause.
Closes#13761
This adds an API for force merging lucene segments. The `/_optimize` API is now
deprecated and replaced by the `/_forcemerge` API, which has all the same flags
and action, just a different name.
This commit removes some build output files from the
burn_maven_with_fire_branch that appear to have been mistakenly
committed to master in bfb9054a11.
* Add ability for plugins to declare additional permissions with a custom plugin-security.policy file and corresponding AccessController logic. See the plugin author's guide for more information.
* Add warning messages to users for extra plugin permissions in bin/plugin.
* When bin/plugin is run interactively (stdin is a controlling terminal and -b/--batch not supplied), require user confirmation.
* Improve unit test and IDE support for plugins with additional permissions by exposing plugin's metadata as a maven test resource.
Closes#14108
Squashed commit of the following:
commit cf8ace65a7397aaccd356bf55f95d6fbb8bb571c
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 13:36:05 2015 -0400
fix new unit test from master merge
commit 9be3c5aa38f2d9ae50f3d54924a30ad9cddeeb65
Merge: 2f168b8 7368231
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:58:31 2015 -0400
Merge branch 'master' into off_my_back
commit 2f168b8038e32672f01ad0279fb5db77ba902ae8
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:56:04 2015 -0400
improve plugin author documentation
commit 6e6c2bfda68a418d92733ac22a58eec35508b2d0
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:52:14 2015 -0400
move security confirmation after 'plugin already installed' check, to prevent user from answering unnecessary questions.
commit 08233a2972554afef2a6a7521990283102e20d92
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 05:36:42 2015 -0400
Add documentation and pluginmanager support
commit 05dad86c51488ba43ccbd749f0164f3fbd3aee62
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 02:22:24 2015 -0400
Decentralize plugin permissions (modulo docs and pluginmanager work)
This test had to be moved to lang-groovy when groovy has been made a plugin.
I refactored it a bit to use mock plugins instead so that groovy is not
necessary anymore and it can come back to core.
When running in GCE platform, an instance has access to:
http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/0/ip
Which gives back the private IP address, for example `10.240.0.2`.
http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/0/externalIp
Gives back the public Ip address, for example `130.211.108.21`.
As we have for `ec2`, we can support new network host settings:
* `_gce:privateIp:X_`: The private IP address of the machine for a given network interface.
* `_gce:hostname_`: The hostname of the machine.
* `_gce_`: Same as `_gce:privateIp:0_` (recommended).
Closes#13605.
Closes#13590.
BTW resolveIfPossible now throws IOException so code is also updated for ec2 discovery and
some basic tests have been added.
The `_create` API is handy way to specify an index operation should only be done if the document doesn't exist. This is currently implemented in explicit code paths all the way down to the engine. However, conceptually this is no different than any other versioned operation - instead of requiring a document is on a specific version, we require it to be deleted (or non-existent). This PR removes Engine.Create in favor of a slight extension in the VersionType logic.
There are however a couple of side effects:
- DocumentAlreadyExistsException is removed and VersionConflictException is used instead (with an improved error message)
- Update will reject version parameters if the upsert option is used (it doesn't compute anyway).
- Translog.Create is also removed infavor of Translog.Index (that's OK because their binary format was the same, so we can just read Translog.Index of the translog file)
Closes#13955
This test used indexRandom to index 4 documents. indexRandom introduces also bogus documents which were getting on the way now that we use fieldValueFactor instead of a script to determine the script of the documents. Taken out indexRandom to simplify things and make the tests more predictable.
Boaz Leskes
Colin Goodheart-Smithe
Nicholas Knize
Robert Muir
Ryan Ernst
Tanguy Leroux
David Pilato
Adrien Grand
Christoph Büscher
Simon Willnauer
Areek Zillur
Nik Everett
xuzha
Jeff Destine
Christian Haudum
javanna
Simon Willnauer
Lee Hinman
Jason Tedor
Britta Weber
Britta Weber