Today we rewrite the operations from the leader with the term of the
following primary because the follower should own its history. The
problem is that a newly promoted primary may re-assign its term to
operations which were replicated to replicas before by the previous
primary. If this happens, some operations with the same seq_no may be
assigned different terms. This is not good for the future optimistic
locking using a combination of seqno and term.
This change ensures that the primary of a follower only processes an
operation if that operation was not processed before. The skipped
operations are guaranteed to be delivered to replicas via either
primary-replica resync or peer-recovery. However, the primary must not
acknowledge until the global checkpoint is at least the highest seqno of
all skipped ops (i.e., they all have been processed on every replica).
Relates #31751
Relates #31113
Since all calls to `ESLoggerFactory` outside of the logging package were
deprecated, it seemed like it'd simplify things to migrate all of the
deprecated calls and declare `ESLoggerFactory` to be package private.
This does that.
Adds support for the get rollup job to the High Level REST Client. I had
to do three interesting and unexpected things:
1. I ported the rollup state wiping code into the high level client
tests. I'll move this into the test framework in a followup and remove
the x-pack version.
2. The `timeout` in the rollup config was serialized using the
`toString` representation of `TimeValue` which produces fractional time
values which are more human readable but aren't supported by parsing. So
I switched it to `getStringRep`.
3. Refactor the xcontent round trip testing utilities so we can test
parsing of classes that don't implements `ToXContent`.
This change introduces the indexing optimization using sequence numbers
in the FollowingEngine. This optimization uses the max_seq_no_updates
which is tracked on the primary of the leader and replicated to replicas
and followers.
Relates #33656
Fixes the equals and hash function to ignore the order of aggregations to ensure equality after serialization
and deserialization. This ensures storing configs with aggregation works properly.
This also addresses a potential issue in caching when the same query contains aggregations but in
different order. 1st it will not hit in the cache, 2nd cache objects which shall be equal might end up twice in
the cache.
The synonym filters no longer need access to the AnalysisRegistry in their
constructors, so we can remove the special-case code and move them to the
common analysis module.
This commit means that synonyms are no longer available for `server` integration tests,
so several of these are either rewritten or migrated to the common analysis module
as rest-spec-api tests
This commit adds the ability to plug in compilation of custom contexts
in mock script engine. This is needed for testing plugins which add
custom contexts like watcher.
* Handle MatchNoDocsQuery in span query wrappers
This change adds a new SpanMatchNoDocsQuery query that replaces
MatchNoDocsQuery in the span query wrappers.
The `wildcard` query now returns MatchNoDocsQuery if the target field is not
in the mapping (#34093) so we need the equivalent span query in order to
be able to pass it to other span wrappers.
Closes#34105
EngineSearcher can be easily folded into Engine.Searcher which removes
a level of inheritance that is necessary for most of it's subclasses.
This change folds it into Engine.Searcher and removes the dependency on
ReferenceManager.
This commit duplicates REST tests for the
- `indices.create`
- `indices.put_mapping`
- `indices.get_mapping`
- `index`
- `get`
- `delete`
- `update`
- `bulk`
APIs, so that we both test them when used without types (include_type_name=false)
and with types, mostly for mixed-version cluster tests.
Given a suite called `X_test_name.yml`, I first copied it to
`(X+1)_test_name_with_types.yml` and then changed `X_test_name.yml` to set
`include_type_name=false` on every API that supports it.
Relates #15613
This commits creates a DateMathParser interface, which is already
implemented for both joda and java time. While currently the java time
DateMathParser is not used, this change will allow a followup which will
create a DateMathParser from a DateFormatter, so the caller does not
need to know the internals of the DateFormatter they have.
Previously, unmapped aggs try to delegate reduction to a sibling agg that is
mapped. That delegated agg will run the reductions, and also
reduce any pipeline aggs. But because delegation comes before running
pipelines, the unmapped agg _also_ tries to run pipeline aggs.
This causes the pipeline to run twice, and potentially double it's output
in buckets which can create invalid JSON (e.g. same key multiple times)
and break when converting to maps.
This fixes by sorting the list of aggregations ahead of time so that mapped
aggs appear first, meaning they preferentially lead the reduction. If all aggs
are unmapped, the first unmapped agg simply creates a new unmapped object
and returns that for the reduction.
This means that unmapped aggs no longer defer and there is no chance for
a secondary execution of pipelines (or other side effects caused by deferring
execution).
Closes#33514
This change cleans up "unused variable" warnings. There are several cases were we
most likely want to suppress the warnings (especially in the client documentation test
where the snippets contain many unused variables). In a lot of cases the unused
variables can just be deleted though.
This commit removes the sysprop controlling whether ctx is in params for
update scripts and replaces it with use of the new ParameterMap, which
outputs a deprecation warning whenever params.ctx is used.
We start tracking max seq_no_of_updates on the primary in #33842. This
commit replicates that value from a primary to its replicas in replication
requests or the translog phase of peer-recovery.
With this change, we guarantee that the value of max seq_no_of_updates
on a replica when any index/delete operation is performed at least the
max_seq_no_of_updates on the primary when that operation was executed.
Relates #33656
This commit introduces an AbstractSimpleSecurityTransportTestCase for
security transports. This classes provides transport tests that are
specific for security transports. Additionally, it fixes the tests referenced in
#33285.
This PR is the first step to use seq_no to optimize indexing operations.
The idea is to track the max seq_no of either update or delete ops on a
primary, and transfer this information to replicas, and replicas use it
to optimize indexing plan for index operations (with assigned seq_no).
The max_seq_no_of_updates on primary is initialized once when a primary
finishes its local recovery or peer recovery in relocation or being
promoted. After that, the max_seq_no_of_updates is only advanced internally
inside an engine when processing update or delete operations.
Relates #33656
This commit reverts most of #33157 as it introduces another race
condition and breaks a common case of watcher, when the first watch is
added to the system and the index does not exist yet.
This means, that the index will be created, which triggers a reload, but
during this time the put watch operation that triggered this is not yet
indexed, so that both processes finish roughly add the same time and
should not overwrite each other but act complementary.
This commit reverts the logic of cleaning out the ticker engine watches
on start up, as this is done already when the execution is paused -
which also gets paused on the cluster state listener again, as we can be
sure here, that the watches index has not yet been created.
This also adds a new test, that starts a one node cluster and emulates
the case of a non existing watches index and a watch being added, which
should result in proper execution.
Closes#33320
* Setting SO_LINGER for open but not connected non-blocking sockets
throws on OSX
* Fixed by only applying setting to connected sockets which will save
the same number of FDs as doing it on open sockets anyway
* closes#33879
Today we don't store the auto-generated timestamp of append-only
operations in Lucene; and assign -1 to every index operations
constructed from LuceneChangesSnapshot. This looks innocent but it
generates duplicate documents on a replica if a retry append-only
arrives first via peer-recovery; then an original append-only arrives
via replication. Since the retry append-only (delivered via recovery)
does not have timestamp, the replica will happily optimizes the original
request while it should not.
This change transmits the max auto-generated timestamp from the primary
to replicas before translog phase in peer recovery. This timestamp will
prevent replicas from optimizing append-only requests if retry
counterparts have been processed.
Relates #33656
Relates #33222
Currently, assertSeqNos assumes that the cluster is stable at the end of
the test (i.e., no more shard movement). However, this assumption does
not always hold. In these cases, we can stop the assertion instead of
failing a test.
Closes#33704
Changes the default of the `node.name` setting to the hostname of the
machine on which Elasticsearch is running. Previously it was the first 8
characters of the node id. This had the advantage of producing a unique
name even when the node name isn't configured but the disadvantage of
being unrecognizable and not being available until fairly late in the
startup process. Of particular interest is that it isn't available until
after logging is configured. This forces us to use a volatile read
whenever we add the node name to the log.
Using the hostname is available immediately on startup and is generally
recognizable but has the disadvantage of not being unique when run on
machines that don't set their hostname or when multiple elasticsearch
processes are run on the same host. I believe that, taken together, it
is better to default to the hostname.
1. Running multiple copies of Elasticsearch on the same node is a fairly
advanced feature. We do it all the as part of the elasticsearch build
for testing but we make sure to set the node name then.
2. That the node.name defaults to some flavor of "localhost" on an
unconfigured box feels like it isn't going to come up too much in
production. I expect most production deployments to at least set the
hostname.
As a bonus, production deployments need no longer set the node name in
most cases. At least in my experience most folks set it to the hostname
anyway.
Wraps all lines in our test framework at 140 characters because that is
our standard line length and removes all of the checkstyle suppressions
for the test framework.
Drops most of `ModuleTestCase` because it isn't used and we're moving
away from using guice in the way that it wants to test anyway. Also
switches a few classes that extend it but don't use it to extend
`ESTestCase` instead.
* TESTS: Set SO_LINGER = 0 for MockNioTransport
* Prevents lingering sockets in TIME_WAIT piling up during test runs and leading to port collisions that manifest as timeouts
* Fixes#32552
This change fixes a bug introduced in 6.3 that prevents fields with an explicit
similarity to be updated. It also adds a test that checks this case for similarities
but also for analyzers since they could suffer from the same problem.
Closes#33611
Today we use a special unicast hosts provider, the `MockUncasedHostsProvider`,
in many integration tests, to deal with the dynamic nature of the allocation of
ports to nodes. However #33241 allows us to use file-based discovery to achieve
the same goal, so the special test-only `MockUncasedHostsProvider` is no longer
required.
This change removes `MockUncasedHostProvider` and replaces it with file-based
discovery in tests based on `EsIntegTestCase`.
For correctness we need to verify whether the history uuid of the leader
index shards never changes while that index is being followed.
* The history UUIDs are recorded as custom index metadata in the follow index.
* The follow api validates whether the current history UUIDs of the leader
index shards are the same as the recorded history UUIDs.
If not the follow api fails.
* While a follow index is following a leader index; shard follow tasks
on each shard changes api call verify whether their current history uuid
is the same as the recorded history uuid.
Relates to #30086
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
This change adds a `_source` only snapshot repository that allows to wrap
any existing repository as a _backend_ to snapshot only the `_source` part
including live docs markers. Snapshots taken with the `source` repository
won't include any indices, doc-values or points. The snapshot will be reduced in size and
functionality such that it requires full re-indexing after it's successfully restored.
The restore process will copy the `_source` data locally starts a special shard and engine
to allow `match_all` scrolls and searches. Any other query, or get call will fail with and unsupported operation exception. The restored index is also marked as read-only.
This feature aims mainly for disaster recovery use-cases where snapshot size is
a concern or where time to restore is less of an issue.
**NOTE**: The snapshot produced by this repository is still a valid lucene index. This change doesn't allow for any longer retention policies which is out of scope for this change.
Colin Goodheart-Smithe
Nhat Nguyen
Nik Everett
Kazuhiro Sera
Gordon Brown
Lee Hinman
Ryan Ernst
Hendrik Muhs
Alan Woodward
Jim Ferenczi
Simon Willnauer
Yogesh Gaikwad
Adrien Grand
Zachary Tong
Christoph Büscher
Tim Brooks
Vladimir Dolzhenko
lipsill
Alexander Reelsen
Armin Braun
Tim Vernum
Or Bin
Alpar Torok
David Turner
Martijn van Groningen