Elasticsearch currently blocks writes by default when a master is unavailable. The cluster.no_master_block setting allows
a user to change this behavior to also block reads when a master is unavailable. This PR introduces a way to now also still
allow writes when a master is offline. Writes will continue to work as long as routing table changes are not needed (as
those require the master for consistency), or if dynamic mapping updates are not required (as again, these require the
master for consistency).
Eventually we should switch the default of cluster.no_master_block to this new mode.
There is no point in timing out a join attempt any more once a cluster
is entirely in 7.x. Timing out and retrying with the same master is
pointless, and an in-flight join attempt to one master no longer blocks
attempts to join other masters. This commit deprecates this unnecessary
setting and removes its effect from the joining process.
Relates #60873 which removes this setting in master.
* Moves `Discovery and cluster formation` content from `Modules` to
`Set up Elasticsearch`.
* Combines `Adding and removing nodes` with `Adding nodes to your
cluster`. Adds related redirect.
* Removes and redirects the `Modules` page.
* Rewrites parts of `Discovery and cluster formation` to remove `module`
references and meta references to the section.
The introductory sections of the reference manual contains some simplified
instructions for adding a node to the cluster. Unfortunately they are a little
too simplified and only really work for clusters running on `localhost`. If you
try and follow these instructions for a distributed cluster then the new node
will, confusingly, auto-bootstrap itself into a distinct one-node cluster.
Multiple nodes running on localhost is a valid config, of course, but we should
spell out that these instructions are really only for experimentation and that
it takes a bit more work to add nodes to a distributed cluster. This commit
does so.
Also, the "important config" instructions for discovery say that you MUST set
`discovery.seed_hosts` whereas in fact it is fine to ignore this setting and
use a dynamic discovery mechanism instead. This commit weakens this statement
and links to the docs for dynamic discovery mechanisms.
Finally, this section is also overloaded with some technical details that are
not important for this context and are adequately covered elsewhere, and
completely fails to note that the default discovery port is 9300. This commit
addresses this.
Today we use `cluster.join.timeout` to prevent nodes from waiting indefinitely
if joining a faulty master that is too slow to respond, and
`cluster.publish.timeout` to allow a faulty master to detect that it is unable
to publish its cluster state updates in a timely fashion. If these timeouts
occur then the node restarts the discovery process in an attempt to find a
healthier master.
In the special case of `discovery.type: single-node` there is no point in
looking for another healthier master since the single node in the cluster is
all we've got. This commit suppresses these timeouts and instead lets the node
wait for joins and publications to succeed no matter how long this might take.
The "Restore any snapshots as required" step is a trap: it's somewhere between
tricky and impossible to restore multiple clusters into a single one.
Also add a note about configuring discovery during a rolling upgrade to
proscribe any rare cases where you might accidentally autobootstrap during the
upgrade.
Clarifies not to set `cluster.initial_master_nodes` on nodes that are joining
an existing cluster.
Co-Authored-By: James Rodewig <james.rodewig@elastic.co>
The changes in #32006 mean that the discovery process can no longer use
master-ineligible nodes as a stepping-stone between master-eligible nodes.
This was normally an indication of a strange and possibly-fragile configuration
and was not recommended, but this commit adds a note to the breaking changes
docs to note that this kind of configuration is more obviously broken in recent
versions.
Today the lag detector may remove nodes from the cluster if they fail to apply
a cluster state within a reasonable timeframe, but it is rather unclear from
the default logging that this has occurred and there is very little extra
information beyond the fact that the removed node was lagging. Moreover the
only forewarning that the lag detector might be invoked is a message indicating
that cluster state publication took unreasonably long, which does not contain
enough information to investigate the problem further.
This commit adds a good deal more detail to make the issues of slow nodes more
prominent:
- after 10 seconds (by default) we log an INFO message indicating that a
publication is still waiting for responses from some nodes, including the
identities of the problematic nodes.
- when the publication times out after 30 seconds (by default) we log a WARN
message identifying the nodes that are still pending.
- the lag detector logs a more detailed warning when a fatally-lagging node is
detected.
- if applying a cluster state takes too long then the cluster applier service
logs a breakdown of all the tasks it ran as part of that process.
This commit addresses a few more frequently-asked questions:
* clarifies that bootstrapping doesn't happen even after a full cluster
restart.
* removes the example that uses IP addresses, to try and further encourage the
use of node names for bootstrapping.
* clarifies that auto-bootstrapping might form different clusters on different
hosts, and gives a process for starting again if this wasn't what you wanted.
* adds the "do not stop half-or-more of the master-eligible nodes" slogan that
was notably absent.
* reformats one of the console examples to a narrower width
In cases where node names and transport addresses can be muddled, it is unclear
that `cluster.initial_master_nodes: master-a:9300` means to look for a node
called `master-a:9300` rather than a node called `master-a` with transport port
`9300`. This commit adds docs to that effect.
The following phrase causes confusion:
> Alternatively the IP addresses or hostnames (if node name defaults to the
> host name) can be used.
This change clarifies the conditions under which you can use a hostname, and
adds an anchor to the note introduced in (#41137) so we can link directly to it
in conversations with users.
In #38333 and #38350 we moved away from the `discovery.zen` settings namespace
since these settings have an effect even though Zen Discovery itself is being
phased out. This change aligns the documentation and the names of related
classes and methods with the newly-introduced naming conventions.
Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
Reduces the leader and follower check timeout to 3 * 10 = 30s instead of 3 * 30 = 90s, with 30s still
being a very long time for a node to be completely unresponsive.
Abdicates to another master-eligible node once the active master is reconfigured out of the voting
configuration, for example through the use of voting configuration exclusions.
Follow-up to #37712
This commit overhauls the documentation of discovery and cluster coordination,
removing mention of the Zen Discovery module and replacing it with docs for the
new cluster coordination mechanism introduced in 7.0.
Relates #32006
This is related to #36652. In 7.0 we plan to deprecate a number of
settings that make reference to the concept of a tcp transport. We
mostly just have a single transport type now (based on tcp). Settings
should only reference tcp if they are referring to socket options. This
commit updates the settings in the docs. And removes string usages of
the old settings. Additionally it adds a missing remote compress setting
to the docs.
Today we support a static list of seed hosts in core Elasticsearch, and allow a
dynamic list of seed hosts to be provided via a file using the `discovery-file`
plugin. In fact the ability to provide a dynamic list of seed hosts is
increasingly useful, so this change moves this functionality to core
Elasticsearch to avoid the need for a plugin.
Furthermore, in order to start up nodes in integration tests we currently
assign a known port to each node before startup, which unfortunately sometimes
fails if another process grabs the selected port in the meantime. By moving the
`discovery-file` functionality into the core product we can use it to avoid
this race.
This change also moves the expected path to the file from
`$ES_PATH_CONF/discovery-file/unicast_hosts.txt` to
`$ES_PATH_CONF/unicast_hosts.txt`. An example of this file is not included in
distributions.
For BWC purposes the plugin still exists, but does nothing more than create the
example file in the old location, and issue a warning when it is used. We also
continue to support the old location for the file, but warn about its
deprecation.
Relates #29244Closes#33030
This commit adds a small note to the discovery docs to include a note
that we recommend that the unicast hosts list be maintained as the list
of master-eligible nodes in the cluster.
Relates #25991
This commit adds a link to the minimum master nodes section of the
important settings docs from the Zen discovery docs to clarify the
meaning and importance of setting minimum master nodes to a quorum of
master-eligible nodes.
Relates #24311
Today when you do not specify a port for an entry in
discovery.zen.ping.unicast.hosts, the default port is the value of the
setting transport.profiles.default.port and falls back to the value of
transport.tcp.port if this is not set. For a node that is explicitly
bound to a different port than the default port, this means that the
default port will be equal to this explicitly bound port. Yet, the docs
say that we fall back to 9300 here. This commit corrects the docs.
Relates #22568
Today we eagerly resolve unicast hosts. This means that if DNS changes,
we will never find the host at the new address. Moreover, a single host
failng to resolve causes startup to abort. This commit introduces lazy
resolution of unicast hosts. If a DNS entry changes, there is an
opportunity for the host to be discovered. Note that under the Java
security manager, there is a default positive cache of infinity for
resolved hosts; this means that if a user does want to operate in an
environment where DNS can change, they must adjust
networkaddress.cache.ttl in their security policy. And if a host fails
to resolve, we warn log the hostname but continue pinging other
configured hosts.
When doing DNS resolutions for unicast hostnames, we wait until the DNS
lookups timeout. This appears to be forty-five seconds on modern JVMs,
and it is not configurable. If we do these serially, the cluster can be
blocked during ping for a lengthy period of time. This commit introduces
doing the DNS lookups in parallel, and adds a user-configurable timeout
for these lookups.
Relates #21630
As discussed at https://github.com/elastic/elasticsearch-cloud-azure/issues/91#issuecomment-229113595, we know that the current `discovery-azure` plugin only works with Azure Classic VMs / Services (which is somehow Legacy now).
The proposal here is to rename `discovery-azure` to `discovery-azure-classic` in case some users are using it.
And deprecate it for 5.0.
Closes#19144.
We currently have a `discovery.zen.master_election.filter_client` setting that control whether their ping responses are ignored for master election (which is the current default). With the push to treat client nodes as normal nodes (and promote the transport/rest clients for client work), this should be changed. This commit remove this setting and it's companion `discovery.zen.master_election.filter_data` setting (currently defaulting to false) in favor of singe `discovery.zen.master_election.ignore_non_master_pings` setting with more intuitive name (defaulting to false).
Resolves#17325Closes#17329
Yannick Welsch
David Turner
James Rodewig
James Rodewig
glerb
Lisa Cawley
Tim Brooks
Jason Tedor
Christoph Büscher
Till Backhaus
Iliiaz Akhmedov
Praveen Shukla
kingrhoton
David Pilato
Kyle Gochenour
javanna
Boaz Leskes