Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
* Adding apm_user
* Fixing SecurityDocumentationIT testGetRoles test
* Adding access to .ml-anomalies-*
* Fixing APM test, we don't have access to the ML state index
X-Pack security supports built-in authentication service
`token-service` that allows access tokens to be used to
access Elasticsearch without using Basic authentication.
The tokens are generated by `token-service` based on
OAuth2 spec. The access token is a short-lived token
(defaults to 20m) and refresh token with a lifetime of 24 hours,
making them unsuitable for long-lived or recurring tasks where
the system might go offline thereby failing refresh of tokens.
This commit introduces a built-in authentication service
`api-key-service` that adds support for long-lived tokens aka API
keys to access Elasticsearch. The `api-key-service` is consulted
after `token-service` in the authentication chain. By default,
if TLS is enabled then `api-key-service` is also enabled.
The service can be disabled using the configuration setting.
The API keys:-
- by default do not have an expiration but expiration can be
configured where the API keys need to be expired after a
certain amount of time.
- when generated will keep authentication information of the user that
generated them.
- can be defined with a role describing the privileges for accessing
Elasticsearch and will be limited by the role of the user that
generated them
- can be invalidated via invalidation API
- information can be retrieved via a get API
- that have been expired or invalidated will be retained for 1 week
before being deleted. The expired API keys remover task handles this.
Following are the API key management APIs:-
1. Create API Key - `PUT/POST /_security/api_key`
2. Get API key(s) - `GET /_security/api_key`
3. Invalidate API Key(s) `DELETE /_security/api_key`
The API keys can be used to access Elasticsearch using `Authorization`
header, where the auth scheme is `ApiKey` and the credentials, is the
base64 encoding of API key Id and API key separated by a colon.
Example:-
```
curl -H "Authorization: ApiKey YXBpLWtleS1pZDphcGkta2V5" http://localhost:9200/_cluster/health
```
Closes#34383
The HLRC client currently uses `org.elasticsearch.action.admin.indices.get.GetIndexRequest`
and `org.elasticsearch.action.admin.indices.get.GetIndexResponse` in its get index calls. Both request and
response are designed for the typed APIs, including some return types e.g. for `getMappings()` which in
the maps it returns still use a level including the type name.
In order to change this without breaking existing users of the HLRC API, this PR introduces two new request
and response objects in the `org.elasticsearch.client.indices` client package. These are used by the
IndicesClient#get and IndicesClient#exists calls now by default and support the type-less API. The old request
and response objects are still kept for use in similarly named, but deprecated methods.
The newly introduced client side classes are simplified versions of the server side request/response classes since
they don't need to support wire serialization, and only the response needs fromXContent parsing (but no
xContent-serialization, since this is the responsibility of the server-side class).
Also changing the return type of `GetIndexResponse#getMapping` to
`Map<String, MappingMetaData> getMappings()`, while it previously was returning another map
keyed by the type-name. Similar getters return simple Maps instead of the ImmutableOpenMaps that the
server side response objects return.
We mention in our documentation for the token
expiration configuration maximum value is 1 hour
but do not enforce it. This commit adds max limit
to the TOKEN_EXPIRATION setting.
As mapping types are being removed throughout Elasticsearch, the use of
`_type` in pipeline simulation requests is deprecated. Additionally, the
default `_type` used if one is not supplied has been changed to `_doc` for
consistency with the rest of Elasticsearch.
This test should not pass until CCR finishes integrating shard history
retention leases. It currently sometimes passes (which is a bug in the
test), but cannot pass reliably until the linked issue is resolved.
There are two issues regarding the way that we sync mapping from leader
to follower when a ccr restore is completed:
1. The returned mapping from a cluster service might not be up to date
as the mapping of the restored index commit.
2. We should not compare the mapping version of the follower and the
leader. They are not related to one another.
Moreover, I think we should only ensure that once the restore is done,
the mapping on the follower should be at least the mapping of the copied
index commit. We don't have to sync the mapping which is updated after
we have opened a session.
Relates #36879Closes#37887
This is related to #35975. Currently when an index falls behind a leader
it encounters a fatal exception. This commit adds a test for that
scenario. Additionally, it tests that the user can stop following, close
the follower index, and put follow again. After the indexing is
re-bootstrapped, it will recover the documents it lost in normal
following operations.
This commit fixes the pinning of SSLContexts to TLSv1.2 in the
SSLConfigurationReloaderTests. The pinning was added for the initial
creation of clients and webservers but the updated contexts would
default to TLSv1.3, which is known to cause hangs with the
MockWebServer that we use.
Relates #38103Closes#38247
Relax test warning message checking to pre-empt PR 38022 landing in 6.7 with new warning messages.
The relaxed test now just assumes any warning message starting with “[types removal]” is tolerated rather than the precise phrasing used in the 6.7 branch.
IndexLifecycleExplainResponse did not allow unknown fields. This commit
fixes the test and ConstructingObjectParser such that it allows unknown
fields.
Coalesces two calls into one in a scroll example so all callouts are at
the end of the line. This is the only sort of callouts that are
supported by asciidoctor and we'd like to start building our docs with
asciidoctor.
At present we don't have any mechanism to stop folks adding more inline
callouts but we ought to be able to have one in a few weeks. For now,
though, removing these inline callouts is a step in the right direction.
Relates to #38335
This commit deprecates the few methods that had their parameters
reordered to facilitate the move from EmptyResponse to boolean. This
commit also readds the boolean based methods with the proper
signatures.
Relates #37540
Relates #36938
This PR removes the use of document types from the monitoring exporters and template + watches setup code.
It does not remove the notion of types from the monitoring bulk API endpoint "front end" code as that code will eventually just go away in 8.0 and be replaced with Beats as collectors/shippers directly to the monitoring cluster.
The message `... took [31s] above the warn threshold of 30s` suggests
incorrectly that the task took 61 seconds. This commit adds the clarifying
words `which is`.
At times, we need to check for usage of deprecated settings in settings
which should not be returned by the NodeInfo API. This commit changes
the deprecation info API to run all node checks locally so that these
settings can be checked without exposing them via any externally
accessible API.
This commit introduces a background sync for retention leases. The idea
here is that we do a heavyweight sync when adding a new retention lease,
and then periodically we want to background sync any retention lease
renewals to the replicas. As long as the background sync interval is
significantly lower than the extended lifetime of a retention lease, it
is okay if from time to time a replica misses a sync (it will still have
an older version of the lease that is retaining more data as we assume
that renewals do not decrease the retaining sequence number). There are
two follow-ups that will come after this commit. The first is to address
the fact that we have not adapted the should periodically flush logic to
possibly flush the retention leases. We want to do something like flush
if we have not flushed in the last five minutes and there are renewed
retention leases since the last time that we flushed. An additional
follow-up will remove the syncing of retention leases when a retention
lease expires. Today this sync could be invoked in the background by a
merge operation. Rather, we will move the syncing of retention lease
expiration to be done under the background sync. The background sync
will use the heavyweight sync (write action) if a lease has expired, and
will use the lightweight background sync (replication action) otherwise.
The explanation so far can be invaluable for troubleshooting
as incorrect decisions made early on in the structure analysis
can result in seemingly crazy decisions or timeouts later on.
Relates elastic/kibana#29821
Reduces the leader and follower check timeout to 3 * 10 = 30s instead of 3 * 30 = 90s, with 30s still
being a very long time for a node to be completely unresponsive.
With this commit we add a monotonically strict timer to ensure time is
advancing even if the timer is called in a tight loop in tests. We also
relax a condition in a similar test so it only checks that time is not
moving backwards.
Closes#33747
This adds a dedicated field mapper that supports nanosecond resolution -
at the price of a reduced date range.
When using the date field mapper, the time is stored as milliseconds since the epoch
in a long in lucene. This field mapper stores the time in nanoseconds
since the epoch - which means its range is much smaller, ranging roughly from
1970 to 2262.
Note that aggregations will still be in milliseconds.
However docvalue fields will have full nanosecond resolution
Relates #27330
Today the following settings in the `discovery.zen` namespace are still used:
- `discovery.zen.no_master_block`
- `discovery.zen.hosts_provider`
- `discovery.zen.ping.unicast.concurrent_connects`
- `discovery.zen.ping.unicast.hosts.resolve_timeout`
- `discovery.zen.ping.unicast.hosts`
This commit deprecates all other settings in this namespace so that they can be
removed in the next major version.
* This was a merge mistake on my end I think, obviously we only need to loop over the shards once not twice here to find those that we missed in INIT state
It would be beneficial to apply some of the request interceptors even
when features are disabled. This change reworks the way we build that
list so that the interceptors we always want to use are constructed
outside of the settings check.
Instead of throwing an exception, use an unresolved attribute to pass
the message to the Verifier.
Additionally improve the parser to save the extended source for the
Aggregate and OrderBy.
Close#38208
David Turner
Przemyslaw Gomulka
Brandon Kobel
Yogesh Gaikwad
Christoph Büscher
Tal Levy
Gordon Brown
Nhat Nguyen
Tim Brooks
Jay Modi
Mayya Sharipova
markharwood
Michael Basnight
Nik Everett
Shaunak Kashyap
Zachary Tong
Adrien Grand
Andrey Ershov
Jason Tedor
Lee Hinman
David Roberts
Boaz Leskes
Yannick Welsch
Daniel Mitterdorfer
Alexander Reelsen
Armin Braun
Alpar Torok
Tim Vernum
Costin Leau