Our default pattern layout truncates log messages. This is to avoid
blowing disk space from excessively log messages, which can happen if a
message contains a mapping or an large query. Yet, we trunacte from the
beginning which is probably where the most germane information is. This
commit modifies the default pattern layout to trunacte from the end.
Relates #21609
On some systems these utilities are in /usr/lib/systemd/systemd-sysctl
and /usr/sbin/sysctl, and on others the /usr is dropped. This commit
accounts for that fact.
Our docs claim that we set vm.max_map_count automatically. This is not
quite the case. The story is that on SysV init we set vm.max_map_count
each time the service starts, which is good. On systemd, we create a
sysctl.d conf file that sets vm.map_max_count, but this is only
meaningful if the system is rebooted after package install. This commit
modifies the post-install script so that we run systemd-sysctl so that
the vm.max_map_count change occurs after package install without a
reboot.
Relates #21507
Given that the default is now 1, the comment in the config file was outdated. Also considering that the default value is production ready, we shouldn't list it among the values that need attention when going to production.
Relates to #19964
When installing the Windows service, certain settings like the minimum
heap, maximum heap and thread stack size setting must be set. While
there is an error message making mention of this fact, the error message
is not explicit exactly what setting needs to be set. This commit makes
these settings explicit.
Relates #21200
Currently we always pass -E to the the plugin cli with the conf dir, but
this causes a very confusing error message when not giving a specific
command to the plugin cli. This change makes path.conf pass just like
path.home. These are special settings, so passing via sysprops is the
right thing to do (it is all about how we pass between shell and java
cli).
closes#18689
When upgrading elasticsearch using the RPM package, the scripts directory is removed if it's empty but it won't be recreated by the upgraded package. But after that the service won't start because the scripts dir is missing.
This commit modifies the logger names within Elasticsearch to be the
fully-qualified class name as opposed removing the org.elasticsearch
prefix and dropping the class name. This change separates the root
logger from the Elasticsearch loggers (they were equated from the
removal of the org.elasticsearch prefix) and enables log levels to be
set at the class level (instead of the package level).
Relates #20457
Today we add a prefix when logging within Elasticsearch. This prefix
contains the node name, and index and shard-level components if
appropriate.
Due to some implementation details with Log4j 2 , this does not work for
integration tests; instead what we see is the node name for the last
node to startup. The implementation detail here is that Log4j 2 there is
only one logger for a name, message factory pair, and the key derived
from the message factory is the class name of the message factory. So,
when the last node starts up and starts setting prefixes on its message
factories, it will impact the loggers for the other nodes.
Additionally, the prefixes are lost when logging an exception. This is
due to another implementation detail in Log4j 2. Namely, since we log
exceptions using a parameterized message, Log4j 2 decides that that
means that we do not want to use the message factory that we have
provided (the prefix message factory) and so logs the exception without
the prefix.
This commit fixes both of these issues.
Relates #20429
This commit adds a -q/--quiet option to Elasticsearch so that it does not log anything in the console and closes stdout & stderr streams. This is useful for SystemD to avoid duplicate logs in both journalctl and /var/log/elasticsearch/elasticsearch.log while still allows the JVM to print error messages in stdout/stderr if needed.
closes#17220
The Elasticsearch startup scripts contain checks for the presence of
support for environment variables that were removed in the 5.x
series. These checks warn the user and fail the script if any of the
unsupported environment variables are present. This was provided as
migration step from 2.x to 5.x so that we were not just silently
ignoring environment variables that were previously set. This commit
removes these checks, as upgrades from 2.x to 6.x are not supported.
Relates #20404
Previous versions of Elasticsearch permitted unquoted JSON field names even though this is against the JSON spec. This leniency was disabled by default in the 5.x series of Elasticsearch but a backwards compatibility layer was added via a system property with the intention of removing this layer in 6.0.0. This commit removes this backwards compatibility layer.
Relates #20388
-D parameters used to be allowed when starting elasticsearch scripts.
However, this was removed in #18207, but the elasticsearch-plugin.bat script
was forgotten. This change removes the -D handling.
Jython shades `jansi` into it's classpath without changing it's package or
anything like that. This causes attempts to load native code on windows which
blows up tests. This change adds `log4j.skipJansi=true` system property to our
tests as well as to the JVM properties we set.
This commit configures the deprecation logs to be size-limited to 1 GB,
and compress these logs when they roll. The default configuration will
preserve up to four rolled logs.
Relates #20287
* master:
Increase visibility of deprecation logger
Skip transport client plugin installed on JDK 9
Explicitly disable Netty key set replacement
percolator: Fail indexing percolator queries containing either a has_child or has_parent query.
Make it possible for Ingest Processors to access AnalysisRegistry
Allow RestClient to send array-based headers
Silence rest util tests until the bogusness can be simplified
Remove unknown HttpContext-based test as it fails unpredictably on different JVMs
Tests: Improve rest suite names and generated test names for docs tests
Add support for a RestClient base path
The deprecation logger is an important way to make visible features of
Elasticsearch that are deprecated. Yet, the default logging makes the
log messages for the deprecation logger invisible. We want these log
messages to be visible, so the default logging for the deprecation
logger should enable these log messages. This commit changes the log
level of deprecation log message to warn, and configures the deprecation
logger so that these log messages are visible out of the box.
Relates #20254
Netty replaces the backing set for the selector implementation. The
value of doing this is questionable, and doing this requires permissions
that we are not going to grant. This commit explicitly disables this
optimization rather than relying on it failing due to lack of
permissions.
Relates #20249
the setting in elasticsearch.yml, so that when a user uncomments
out a setting by just removing the #, the setting actually
takes effect. Before, it was very easy to uncomment out a
setting by just removing the #, leaving a single whitespace
character before the setting name, which would cause the
setting to not get picked up by Elasticsearch.
Closes#20090
This commit fixes the handling of spaces in the path to the jvm.options
file on Windows. The issue is that the extraneous set of quotes were
included as part of the value of ES_JVM_OPTIONS thus confusing further
downstream commands.
Relates #19951
With the security permissions that we grant to Netty, Netty can not
access unsafe (because it relies on having the runtime permission
accessDeclaredMembers and the reflect permission
suppressAccessChecks). Instead, we should just explicitly tell Netty to
not use unsafe. This commit adds a flag to the default jvm.options to
tell Netty to not look for unsafe.
Relates #19786
This adds the `bin/elasticsearch-translate` bin file that will be used
for CLI tasks pertaining to Elasticsearch. Currently it implements only
a single sub-command, `truncate-translog`, that creates a truncated
translog for a given folder.
Here's what running the tool looks like:
```
λ bin/elasticsearch-translog truncate -d data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/
Checking existing translog files
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! WARNING: Elasticsearch MUST be stopped before running this tool !
! !
! WARNING: Documents inside of translog files will be lost !
! !
! WARNING: The following files will be DELETED! !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-10.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-18.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-21.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-12.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-25.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-29.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-2.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-5.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-41.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-6.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-37.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-24.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-11.ckp
Continue and DELETE files? [y/N] y
Reading translog UUID information from Lucene commit from shard at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/index]
Translog Generation: 3
Translog UUID : AxqC4rocTC6e0fwsljAh-Q
Removing existing translog files
Creating new empty checkpoint at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog.ckp]
Creating new empty translog at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-3.tlog]
Done.
```
It also includes a `-b` batch operation that can be used to skip the
confirmation diaglog.
Resolves#19123
Today in the packaging removal scripts, we disable the service in
post-uninstall. Yet, this happens after service files have been
erased. On some systems, this can cause the service disable to fail
leaving behind state causing the service to be enabled on subsequent
installs. This commit moves the service disabling to the pre-uninstall
script to prevent this issue.
Relates #19328
Unless explicitly disabled, the parallel new collector is enabled
automatically as soon as the CMS collector is enabled:
void Arguments::set_cms_and_parnew_gc_flags() {
assert(
!UseSerialGC && !UseParallelOldGC && !UseParallelGC,
"Error");
assert(UseConcMarkSweepGC, "CMS is expected to be on here");
// If we are using CMS, we prefer to UseParNewGC,
// unless explicitly forbidden.
if (FLAG_IS_DEFAULT(UseParNewGC)) {
FLAG_SET_ERGO(bool, UseParNewGC, true);
}
While it's fine to be explicit, the UseParNewGC flag is deprecatd in JDK
8 and produces warning messages in JDK 9:
Java HotSpot(TM) 64-Bit Server VM warning: Option UseParNewGC was
deprecated in version 9.0 and will likely be removed in a future
release.
Thus, we can and should just remove this flag from the default JVM
options.
Relates #18767
The setting bootstrap.mlockall is useful on both POSIX-like systems
(POSIX mlockall) and Windows (Win32 VirtualLock). But mlockall is really
a POSIX only thing so the name should not be tied POSIX. This commit
renames the setting to "bootstrap.memory_lock".
Relates #18669
The distributions had their own copies of these extra files, which was a
carry over from maven. This change removes the duplicate files and
copies them from the root of the project.
closes#18597
The default jvm.options file ships with the -server flag to force the
server VM on systems where the server VM is not the default. However,
the method of starting the JVM via the Windows service does not support
the command-line flags for selecting the VM because it starts from a
DLL that is specific to the server or client VM. Thus, we need to
filter these options from the jvm.options configuration file when
installing the Windows service.
Relates #18473
Today when parsing settings during bootstrap, we add a system property
for every Elasticsearch setting. Additionally, settings can be set via
system properties. This commit simplifies this situation.
- settings are no longer propogated to system properties
- system properties can not be used to set settings
- the "es." prefix on settings is no longer required (nor permitted)
- test logging has a dedicated system property (tests.logger.level)
Relates #18198
In the plugin script we set the setting default.path.conf to control the
path to the configuration file. But the default directory might not
exist in which case we can run into exceptions. This commit restores a
guard against this directory not existing.
This commit switches the command-line scripts to use bash instead of sh
so that we can take advantage of features that bash provides like
arrays.
Relates #18251
In 7d1fd17172 the parsing of command-line
properties in the plugin script was removed. That commit missed
additional parsing of the properties for es.default.path.conf. This
commit removes that parsing and also replaces the use of eval with exec.
Relates #18239
The plugin script parses command-line options looking for Java system
properties and extracts these arguments to pass to the java command when
starting the JVM. Since elasticsearch-plugin allows arbitrary user
arguments to the JVM via ES_JAVA_OPTS, this parsing is unnecessary. This
commit removes this unnecessary
Relates #18207
Today we softly warn about running with the client VM. However, we
should really refuse to start in production mode if running with the
client VM as the performance of the client VM is too devastating for a
server application. This commit adds an option to jvm.options to ensure
that we are starting with the server VM (on all 32-bit non-Windows
platforms on server-class machines (2+ CPUs, 2+ GB physical RAM) this is
the default and on all 64-bit platforms this is the only option) and
adds a bootstrap check for the client VM.
Relates #18155
Today we specify the client option for the JVM when executing plugin
commands. Yet, this option does nothing on a 64-bit capable JDK as such
JDKs always select the Hotspot server VM. And for 32-bit JDKs, running
plugin commands with the server VM is okay. Thus, we should just remove
this unnecessary flag and just let the default VM be selected.
Relates #18142
This changes our packaging to be explicit about the permissions of files
and directories in the tar.gz, rpm, and deb packages. This is to protect
against a user having an incorrectly set umask when installing.
Additionally, plugins that are installed now have their permissions set
by the plugin installation so that plugins that may have been packaged
with incorrect permissions are secured.
Resolves#17634
In Elasticsearch 5.0.0, by default unquoted field names in JSON will be
rejected. This can cause issues, however, for documents that were
already indexed with unquoted field names. To alleviate this, a system
property has been added that can be enabled so migration can occur.
This system property will be removed in Elasticsearch 6.0.0
Resolves#17674
Jason Tedor
Yannick Welsch
Luca Cavanna
Tanguy Leroux
gfyoung
Ryan Ernst
Simon Willnauer
Ali Beyad
Clinton Gormley
Lee Hinman
Stefan Scherer
Radovan Ondas
Danilo Vaz