The cache relies on the equals() method so we just need to make sure script
queries can never be equals, even to themselves in the case that a weight
is used to produce a Scorer on the same segment multiple times.
Closes#20763
Today we throw an assertion error if we release an AbstractArray more than once.
Yet, it's recommended to implement close methods such that they can be invoked
more than once. Guaranteed single release calls are hard to implement and some
situations might not be tested causing for instance `CircuitBreaker` to operate on
corrupted memory stats.
UpdateHelper, MetaDataIndexUpgradeService, and some recovery
stuff.
Move ClusterSettings to nullable ctor parameter of TransportService
so it isn't forgotten.
This change proposes the removal of all non-tcp transport implementations. The
mock transport can be used by default to run tests instead of local transport that has
roughly the same performance compared to TCP or at least not noticeably slower.
This is a master only change, deprecation notice in 5.x will be committed as a
separate change.
Today SearchContext expose the current context as a thread local which makes any kind of sane interface design very very hard. This PR removes the thread local entirely and instead passes the relevant context anywhere needed. This simplifies state management dramatically and will allow for a much leaner SearchContext interface down the road.
LongGCDisruption suspends and resumes node threads but respects several
`unsafe` class name patterns where it's unsafe to suspend. For instance
log4j uses a global lock so we can't suspend a thread that is currently
calling into log4j. The same is true for the security manager, it's similar
to log4j a shared resource between the test and the node that is _suspended_.
This change adds `java.lang.SecrityManager` to the unsafe patterns.
This prevents test framework deadlocking if a nodes thread is supended
while it's calling into the security manager that uses synchronized maps etc.
today it's not possible to use date-math efficiently with the `_rollover`
API. This change adds support for date-math in the target index as well as
support for preserving the math logic when an existing index that was created with
a date math expression all subsequent indices are created with the same expression.
The logging listener tests started failing after
953a8a959b when the tests are run with
tests.es.logger.level set to any level other than debug. This is because
these tests were based around the assumption that the default logging
level was info, which was the case before that commit fixed setting the
default logging level via that system property. This commit fixes these
failing tests by adjusting this assumption to account for the fact that
the default logging level could be different.
Pipe in the `tests.es.logger.level` system property to the log4j config file used in tests. We still default to info. Also adapts the logger name to use the first letter of packages.
Pipe in the `tests.es.logger.level` system property to the log4j config file used in tests. We still default to info. Also adapts the logger name to use the first letter of packages.
* master: (1199 commits)
[DOCS] Remove non-valid link to mapping migration document
Revert "Default `include_in_all` for numeric-like types to false"
test: add a test with ipv6 address
docs: clearify that both ip4 and ip6 addresses are supported
Include complex settings in settings requests
Add production warning for pre-release builds
Clean up confusing error message on unhandled endpoint
[TEST] Increase logging level in testDelayShards()
change health from string to enum (#20661)
Provide error message when plugin id is missing
Document that sliced scroll works for reindex
Make reindex-from-remote ignore unknown fields
Remove NoopGatewayAllocator in favor of a more realistic mock (#20637)
Remove Marvel character reference from guide
Fix documentation for setting Java I/O temp dir
Update client benchmarks to log4j2
Changes the API of GatewayAllocator#applyStartedShards and (#20642)
Removes FailedRerouteAllocation and StartedRerouteAllocation
IndexRoutingTable.initializeEmpty shouldn't override supplied primary RecoverySource (#20638)
Smoke tester: Adjust to latest changes (#20611)
...
Many of our unit tests instantiate an `AllocationService`, which requires having a `GatewayAllocator`. Today almost all of our test use a class called `NoopGatewayAllocator` which does nothing, effectively leaving all shard assignments to the balanced allocator. This is sad as it means we test a system that behaves differently than our production logic in very basic things. For example, a started primary that is lost will be assigned to a node that didn't use to have it.
This PR removes `NoopGatewayAllocator` in favor of a new `TestGatewayAllocator` that inherits the standard `GatewayAllocator` and overrides shard information fetching to return information based on historical assignments the allocator has done. The only exception is `BalanceConfigurationTests` which does test only the balancer and I opted to not have it work around the `GatewayAllocator` being in it's way.
Changes the API of GatewayAllocator#applyStartedShards and
GatewayAllocator#applyFailedShards to take both a RoutingAllocation
and a list of shards to apply. This allows better mock allocators
to be created as being done in #20637.
Closes#20642
Removes the FailedRerouteAllocation class and StartedRerouteAllocation
class, as they were just wrappers for RerouteAllocation that stored
started and failed shards, but these started and failed shards can
be passed in directly to the methods that needed them, removing the
need for this wrapper class and extra level of indirection.
Closes#20626
Today we hold on to all possible tokenizers, tokenfilters etc. when we create
an index service on a node. This was mainly done to allow the `_analyze` API to
directly access all these primitive. We fixed this in #19827 and can now get rid of
the AnalysisService entirely and replace it with a simple map like class. This
ensures we don't create a gazillion long living objects that are entirely useless since
they are never used in most of the indices. Also those objects might consume a considerable
amount of memory since they might load stopwords or synonyms etc.
Closes#19828
With the switch to Log4j 2 throughout our code base, the logger usage checker was temporarily disabled. This commit
adapts the checks to work with Log4j 2 and re-enables the Gradle checks.
Closes#20243
This commit changes the default behavior of `_flush` to block if other flushes are ongoing.
This also removes the use of `FlushNotAllowedException` and instead simply return immediately
by skipping the flush. Users should be aware if they set this option that the flush might or might
not flush everything to disk ie. no transactional behavior of some sort.
Closes#20569
This commit removes `ByteSizeValue`'s methods that are duplicated (ex: `mbFrac()` and `getMbFrac()`) in order to only keep the `getN` form.
It also renames `mb()` -> `getMb()`, `kb()` -> `getKB()` in order to be more coherent with the `ByteSizeUnit` method names.
This PR introduces backward compatibility index tests to test the rolling upgrade process amongst Elasticsearch instances within the same major version. The test executes in three phases. In the first phase, we form a cluster of 2 ES instances on an old version. In the second phase, we keep one of the nodes from the old cluster, kill the other node, but preserve its data directory and start an instance of the current version of ES using the same data directory as the killed instance. In the third phase, we kill the other old version ES instance from the first phase and launch a new instance, using the same data directory as the killed instance. Therefore, during phase 3, we have fully migrated and have all current versions of ES running. In each phase, we run REST tests that index documents and search them, ensuring at each stage that the documents from the previous phase are still there.
Note that because we haven't released a GA yet of 5.0, the tests currently don't start an old version cluster in the first phase. Once GA is released, this will be changed to make the backward compatibility version 5.0, while the current version in the cluster will be 5.x.
This change removes all guice interaction from Transport, HttpServerTransport,
HttpServer and TransportService. All these classes as well as their subclasses
or extended version configured via plugins are now created by using plain old
bloody java constructors. YAY!
Currently all the reroute-like methods of `AllocationService` return a result object of type `RoutingAllocation.Result`. The result object contains the new `RoutingTable` and `MetaData` plus an indication whether those were changed. The caller is then responsible of updating a cluster state with these. These means that things can easily go wrong and one can take one of these but not the other causing inconsistencies. We already have a utility method on the `ClusterState` builder that does but no one forces you to do so. Also 99% of the callers do the same thing: i.e., check if the result was changed and if so update the very same cluster state that was passed to `AllocationService`. This PR folds this pattern into `AllocationService` and changes almost all it's methods to return a new cluster state (potentially the original one). This saves some 500 lines of code.
The one exception here is the reroute API which executes allocation commands and potentially returns an explanation as well (next to the routing table and metadata). That API now returns a `CommandsResult` object which encapsulate a cluster state and the explanation.
TransportService is such a central part of the core server, replacing
it's implementation is risky and can cause serious issues. This change removes the ability to
plug in TransportService but allows registering a TransportInterceptor that enables
plugins to intercept requests on both the sender and the receiver ends. This is a commonly used
and overwritten functionality but encapsulates the custom code in a contained manner.
During a networking partition, cluster states updates (like mapping changes or shard assignments)
are committed if a majority of the masters node received the update correctly. This means that the current master has access to enough nodes in the cluster to continue to operate correctly. When the network partition heals, the isolated nodes catch up with the current state and get the changes they couldn't receive before. However, if a second partition happens while the cluster
is still recovering from the previous one *and* the old master is put in the minority side, it may be that a new master is elected which did not yet catch up. If that happens, cluster state updates can be lost.
This commit fixed 95% of this rare problem by adding the current cluster state version to `PingResponse` and use them when deciding which master to join (and thus casting the node's vote).
Note: this doesn't fully mitigate the problem as a cluster state update which is issued concurrently with a network partition can be lost if the partition prevents the commit message (part of the two phased commit of cluster state updates) from reaching any single node in the majority side *and* the partition does allow for the master to acknowledge the change. We are working on a more comprehensive fix but that requires considerate work and is targeted at 6.0.
The only repository we can be sure is safe to clean is `fs` so we clean
any snapshots in those repositories after each test. Other repositories
like url and azure tend to throw exceptions rather than let us fetch
their contents during the REST test. So we clean what we can....
Closes#18159
LongGCDisruption simulates a Long GC by suspending all threads belonging to a node. That's fine, unless those threads hold shared locks that can prevent other nodes from running. Concretely the logging infrastructure, which is shared between the nodes, can cause some deadlocks. LongGCDisruption has protection for this, but it needs to be updated to point at log4j2 classes, introduced in #20235
This commit also fixes improper handling of retry logic in LongGCDisruption and adds a protection against deadlocking the test code which activates the disruption (and uses logging too! :)).
On top of that we have some new, evil and nasty tests.
`TransportService#registerRequestHandler` allowed to register
handlers more than once and issues an annoying warn log message when
this happens. This change simple throws an exception to prevent regsitering
the same handler more than once. This commit also removes the ability
to remove request handlers.
Relates to #20468
After this change SearchModule doesn't subclass AbstractModule anymore and all wiring
happens in `Node.java`. As a side-effect several tests don't need a guice injector anymore.
This commit modifies the logger names within Elasticsearch to be the
fully-qualified class name as opposed removing the org.elasticsearch
prefix and dropping the class name. This change separates the root
logger from the Elasticsearch loggers (they were equated from the
removal of the org.elasticsearch prefix) and enables log levels to be
set at the class level (instead of the package level).
Relates #20457
Today we add a prefix when logging within Elasticsearch. This prefix
contains the node name, and index and shard-level components if
appropriate.
Due to some implementation details with Log4j 2 , this does not work for
integration tests; instead what we see is the node name for the last
node to startup. The implementation detail here is that Log4j 2 there is
only one logger for a name, message factory pair, and the key derived
from the message factory is the class name of the message factory. So,
when the last node starts up and starts setting prefixes on its message
factories, it will impact the loggers for the other nodes.
Additionally, the prefixes are lost when logging an exception. This is
due to another implementation detail in Log4j 2. Namely, since we log
exceptions using a parameterized message, Log4j 2 decides that that
means that we do not want to use the message factory that we have
provided (the prefix message factory) and so logs the exception without
the prefix.
This commit fixes both of these issues.
Relates #20429
This commit cuts over geo_point fields to use Lucene's new point-based LatLonPoint type for indexes created in 5.0. Indexes created prior to 5.0 continue to use their respective encoding type. Below is a description of the changes made to support the new encoding type:
* New indexes use a new LatLonPointFieldMapper which provides a parse method for the new type
* The new LatLonPoint parse method removes support for lat_lon and geohash parameters
* Backcompat testing for deprecated lat_lon and geohash parameters is added to all unit and integration tests
* LatLonPointFieldMapper provides DocValues support (enabled by default) which uses Lucene's new LatLonDocValuesField type
* New LatLonPoint field data classes are added for aggregation support (wraps LatLonPoint's Numeric Doc Values)
* MultiFields use the geohash as the string value instead of the lat,lon string making it easier to perform geo string queries on the geohash instead of a lat,lon comma delimited string.
Removed Features:
* With the removal of geohash indexing, GeoHashCellQuery support is removed for all new indexes (still supported on existing indexes)
* LatLonPoint does not support a Distance Range query because it is super inefficient. Instead, the geo_distance_range query should be accomplished using either the geo_distance aggregation, sorting by descending distance on a geo_distance query, or a boolean must not of the excluded distance (which is what the distance_range query did anyway).
TODO:
* fix/finish yaml changes for plugin and rest integration tests
* update documentation
This commit adds a -q/--quiet option to Elasticsearch so that it does not log anything in the console and closes stdout & stderr streams. This is useful for SystemD to avoid duplicate logs in both journalctl and /var/log/elasticsearch/elasticsearch.log while still allows the JVM to print error messages in stdout/stderr if needed.
closes#17220
In 5.x we allowed this with a deprecation warning. This removes the code
added for that deprecation, requiring the cluster name to not be in the
data path.
Resolves#20391
This change removes the guice dependency handling for SearchService and
several related classes like SearchTransportController and SearchPhaseController.
The latter two now have package private constructors and dependencies like FetchPhase
are now created by calling their constructors explicitly. This also cleans up several users
of the DefaultSearchContext and centralized it's creation inside SearchService.
Splits the PrimaryShardAllocator and ReplicaShardAllocator's decision
making for a shard from the implementation of that decision on the
routing table. This is a step toward making it easier to use the same
logic for the cluster allocation explain APIs.
Introduce a base class for unit tests that are based on real `IndexShard`s. The base class takes care of all the little details needed to create and recover shards.
This commit also moves `IndexShardTests` and `ESIndexLevelReplicationTestCase` to use the new base class. All tests in `IndexShardTests` that required a full node environment were moved to a new `IndexShardIT` suite.
Before, when there was a new cluster state to publish,
zen discovery would first update the set of nodes to
ping based on the new cluster state, then publish the new
cluster state. This is problematic because if the cluster
state failed to publish, then the set of nodes to ping
should not have been updated.
This commit fixes the issue by updating the set of
nodes to ping for fault detection only *after* the new
cluster state has been published.
Search section supports an ext section that is used to provide additional config needed from plugins. It is now tied to sub fetch phases because it is the only section that may need additional config, but there is no reason for the two to be tightly coupled.
It is now possible to register a searchExtParser independently from a sub fetch phase. All a search ext parser does is parsing some ext section of a search request, whose parsed resulting object is stored in the search context for later retrieval.
The context was an object where the parsed info are stored. That is more of what we call the builder since after the search refactoring. No need for generics in FetchSubPhaseParser then. Also the previous setHitsExecutionNeeded wasn't useful, it can be removed as well, given that once there is a parsed ext section, it will become a builder that can be retrieved by the sub fetch phase. The sub fetch phase is responsible for doing nothing in case the builder is not set, meaning that the fetch sub phase is plugged in but the request didn't have the corresponding section.
SearchParseElement is renamed to FetchSubPhaseParser and moved to the search.fetch package. Its parse method doesn't get the SearchContext as argument anymore, only the XContentParser, and the return type is what gets parsed (the fetch sub phase context which we may as well rename later).
It is the parser that initializes the FetchSubPhaseContext then. SearchService retrieves the parser by name, calls parse against it and stores the result of parsing by name. No need for FetchSubPhase.ContextFactory anymore, which can be removed.
Given that doc value fields is our own fetch sub phase, it doesn't need to be implemented like if it was plugged in from the outside. It doesn't need its own fetch sub phase context, but it can just be an instance member in SearchContext
Previously we would disable console logging in certain circumstances
(for example, if Elasticsearch is not in the foreground, or if
Elasticsearch is in the foreground but an exception was thrown during
bootstrap). This commit makes this handling work with Log4j 2. This will
prevent users from seeing double bootstrap check failure messages.
Relates #20387
By default, when an exception causes the JVM to terminate, the stack
trace is printed. In the case of failing bootstrap checks, this stack
trace is useless to the user, and might even distract them from seeing
that the bootstrap checks failed for reasons under their control. With
this commit, we cause the stack trace for a failing bootstrap check to
be truncated.
We also modify some methods to not declare that they throw the top level
checked exception type Exception, but instead explicitly declare the
exceptions that they throw. These exceptions are caught and wrapped in a
BootstrapException so that we can percolate only two exception types out
of Bootstrap#init as checked exception, BootstrapException and
NodeValidationException.
Relates #19989
This commit cleans most of the methods of XContentBuilder so that:
- Jackson's convenience methods are used instead of our custom ones (ie field(String,long) now uses Jackson's writeNumberField(String, long) instead of calling writeField(String) then writeNumber(long))
- null checks are added for all field names and values
- methods are grouped by type in the class source
- methods have the same parameters names
- duplicated methods like field(String, String...) and array(String, String...) are removed
- varargs methods now have the "array" name to reflect that it builds arrays
- unused methods like field(String,BigDecimal) are removed
- all methods now follow the execution path: field(String,?) -> field(String) then value(?), and value(?) -> writeSomething() method. Methods to build arrays also follow the same execution path.
Exposing lucene 6.x minhash tokenfilter
Generate min hash tokens from an incoming stream of tokens that can
be used to estimate document similarity.
Closes#20149
Jython shades `jansi` into it's classpath without changing it's package or
anything like that. This causes attempts to load native code on windows which
blows up tests. This change adds `log4j.skipJansi=true` system property to our
tests as well as to the JVM properties we set.
The BackgroundIndexer now uses auto-generated IDs randomly. This causes some problems
for tests that still rely on the fact that the IDs are increasing integers. This change
exposes all IDs via a Set<String> to iterate over for tests.
This commit configures test logging for Log4j 2. The default logger
configuration uses the console appender but at the error level, so most
tests are missing logging. Instead, this commit provides a configuration
for tests which is picked up from the classpath by Log4j 2 when it
initializes. However, this now means that we can no longer initialize
Log4j with a bare-bones configuration when tests run as doing so will
prevent Log4j 2 from attempting to configure logging via the
classpath. Consequently, we move this needed initialization (as
commented, to avoid a message about a status logger not being configured
when we are preparing to configure Log4j from properties files in the
config directory) to only run when we are explicitly configuring Log4j
from properties files.
Relates #20284
If elasticsearch controls the ID values as well as the documents
version we can optimize the code that adds / appends the documents
to the index. Essentially we an skip the version lookup for all
documents unless the same document is delivered more than once.
On the lucene level we can simply call IndexWriter#addDocument instead
of #updateDocument but on the Engine level we need to ensure that we deoptimize
the case once we see the same document more than once.
This is done as follows:
1. Mark every request with a timestamp. This is done once on the first node that
receives a request and is fixed for this request. This can be even the
machine local time (see why later). The important part is that retry
requests will have the same value as the original one.
2. In the engine we make sure we keep the highest seen time stamp of "retry" requests.
This is updated while the retry request has its doc id lock. Call this `maxUnsafeAutoIdTimestamp`
3. When the engine runs an "optimized" request comes, it compares it's timestamp with the
current `maxUnsafeAutoIdTimestamp` (but doesn't update it). If the the request
timestamp is higher it is safe to execute it as optimized (no retry request with the same
timestamp has been run before). If not we fall back to "non-optimzed" mode and run the request as a retry one
and update the `maxUnsafeAutoIdTimestamp` unless it's been updated already to a higher value
Relates to #19813
* master:
Avoid NPE in LoggingListener
Randomly use Netty 3 plugin in some tests
Skip smoke test client on JDK 9
Revert "Don't allow XContentBuilder#writeValue(TimeValue)"
[docs] Remove coming in 2.0.0
Don't allow XContentBuilder#writeValue(TimeValue)
[doc] Remove leftover from CONSOLE conversion
Parameter improvements to Cluster Health API wait for shards (#20223)
Add 2.4.0 to packaging tests list
Docs: clarify scale is applied at origin+offest (#20242)
* Params improvements to Cluster Health API wait for shards
Previously, the cluster health API used a strictly numeric value
for `wait_for_active_shards`. However, with the introduction of
ActiveShardCount and the removal of write consistency level for
replication operations, `wait_for_active_shards` is used for
write operations to represent values for ActiveShardCount. This
commit moves the cluster health API's usage of `wait_for_active_shards`
to be consistent with its usage in the write operation APIs.
This commit also changes `wait_for_relocating_shards` from a
numeric value to a simple boolean value `wait_for_no_relocating_shards`
to set whether the cluster health operation should wait for
all relocating shards to complete relocation.
* Addresses code review comments
* Don't be lenient if `wait_for_relocating_shards` is set
* master:
Increase visibility of deprecation logger
Skip transport client plugin installed on JDK 9
Explicitly disable Netty key set replacement
percolator: Fail indexing percolator queries containing either a has_child or has_parent query.
Make it possible for Ingest Processors to access AnalysisRegistry
Allow RestClient to send array-based headers
Silence rest util tests until the bogusness can be simplified
Remove unknown HttpContext-based test as it fails unpredictably on different JVMs
Tests: Improve rest suite names and generated test names for docs tests
Add support for a RestClient base path
This commit adds an empty test to ESLoggerUsageTests to avoid the test
suite from failing for having no tests after the existing tests were
marked as awaits fix in 1d197eddcc.
This commit modifies the call sites that allocate a parameterized
message to use a supplier so that allocations are avoided unless the log
level is fine enough to emit the corresponding log message.
Rest test suites are currently only the directory above the yaml test
file. That is confusing when there are more than one directory level
which contain yaml tests, as there are in generated docs tests. This
change makes rest tests use the full relative path to the rest test root
as the suite name, and also makes the test names for docs tests a little
clearer (that they are testing an example from a specific line number,
instead of just the line number as an opaque test name).
Removed null check for token, if we are outside the null it already means it is null.
Fixed typo in comment and remove leftover assignment to unused local variable.
This test is periodically failing. As I suspect that the GCDisruption scheme is somehow making the wrong node block on
its cluster state update thread, I've added some more logging and a thread dump once the given assertion triggers
again.
Adds an explicit recoverySource field to ShardRouting that characterizes the type of recovery to perform:
- fresh empty shard copy
- existing local shard copy
- recover from peer (primary)
- recover from snapshot
- recover from other local shards on same node (shrink index action)
Objects hierarchy must be tracked when entering/leaving an object so that it better knows if the "newField" has been inserted into an arbitrary holding object.
Can be reproduced with gradle :core:test -Dtests.seed=760F8BD0F7E46D45 -Dtests.class=org.elasticsearch.index.query.MoreLikeThisQueryBuilderTests -Dtests.method="testUnknownObjectException" -Dtests.security.manager=true -Dtests.locale=ko -Dtests.timezone=Etc/Zulu
When need to check the whole hierarchy of objects to know if the newly inserted "newField" object is part of an arbitrary holding object or not.
Reproduced with `gradle :modules:percolator:test -Dtests.seed=736B0B67DA7A3632 -Dtests.class=org.elasticsearch.percolator.PercolateQueryBuilderTests -Dtests.method="testUnknownObjectException" -Dtests.security.manager=true -Dtests.locale=es-ES -Dtests.timezone=ART`
This method fails when a randomized string value contains a double-quote. This commit changes the method so that it is not based on string concatenation anymore. It now use XContentGenerator & XContentParser to mutate the valid queries.
Related #19864
This change adds a special field named _none_ that allows to disable the retrieval of the stored fields in a search request or in a TopHitsAggregation.
To completely disable stored fields retrieval (including disabling metadata fields retrieval such as _id or _type) use _none_ like this:
````
POST _search
{
"stored_fields": "_none_"
}
````
Deprecates the optimize_bbox parameter on geodistance queries. This has no longer been needed since version 2.2 because lucene geo distance queries (postings and LatLonPoint) already optimize by bounding box.
This change converts AllocationDecider registration from push based on
ClusterModule to implementing with a new ClusterPlugin interface.
AllocationDecider instances are allowed to use only Settings and
ClusterSettings.
Adds a class that records changes made to RoutingAllocation, so that at the end of the allocation round other values can be more easily derived based on these changes. Most notably, it:
- replaces the explicit boolean flag that is passed around everywhere to denote changes to the routing table. The boolean flag is automatically updated now when changes actually occur, preventing issues where it got out of sync with actual changes to the routing table.
- records actual changes made to RoutingNodes so that primary term and in-sync allocation ids, which are part of index metadata, can be efficiently updated just by looking at the shards that were actually changed.
In addition to be an allocation decider, DiskThresholdDecider also
monitors the used disk in order to trigger a reroute when the thresholds
are crossed. This change splits out the settings for disk thresholds
into DiskThresholdSettings, and moves the monitoring to a new
DiskThresholdMonitor. DiskThresholdDecider is then in line with other
allocation deciders, needing only Settings and ClusterSettings for
construction, which will allow deguicing allocation deciders.
`LobObtainFailedException` should be reserved for on-disk locks that
Lucene attempts (like `write.lock`). This switches our in-memory
semaphore locks for shards to use a different exception. Additionally,
ShardLockObtainFailedException no longer subclasses IOException, since
no IO is being done is this case.
Resolves#19978
As the most complicated `FetchSubPhase` highlighting gets its own package
(`o.e.seach.fetch.subphase.highlight`. No other `FetchSubPhase`s get their
own package. Instead they all reside together in `o.e.search.fetch.subphase`.
Add package descriptions to `o.e.search.fetch` and subpackages.
This commit defaults the max local storage nodes to one. The motivation
for this change is that a default value greather than one is dangerous
as users sometimes end up unknowingly starting a second node and start
thinking that they have encountered data loss.
Relates #19964
This commit separates the description of the links in the network that are to be disrupted from the failure that is to be applied to the links (disconnect/unresponsive/delay). Previously we had subclasses for the various kind of network disruption schemes combining on one hand failure mode (disconnect/unresponsive/delay) as well as the network links to cut (two partitions / bridge partitioning) into a single class.
I also reduced the visibility of a couple classes and renamed/consolidated some
test classes for consistency, eg. removing the `Simple` prefix or using the
`<Type>FieldMapperTests` convention for testing field mappers.
testUnknownObjectException used to generate malformed json objects in some cases, due to the existence of arrays as it was not closing the injected object correctly. That is why the test was catching JsonParseException among the exception that are expected to be thrown. That is fixed by tracking where the new object is placed and placing its end object marker to the right level rather than always at the end.
Also introduced a mechanism to explicitly declare objects that won't cause any exception when they get additional objects injected, so that there is no need to override the method anymore as that caused copy pasting of the whole test method. This also makes sure that changes are reflected in tests, as those inner objects are not skipped but we actually check that what is declared is true (no exceptions get thrown when an additional object is added within them.
When compiling many dynamically changing scripts, parameterized
scripts (<https://www.elastic.co/guide/en/elasticsearch/reference/master/modules-scripting-using.html#prefer-params>)
should be preferred. This enforces a limit to the number of scripts that
can be compiled within a minute. A new dynamic setting is added -
`script.max_compilations_per_minute`, which defaults to 15.
If more dynamic scripts are sent, a user will get the following
exception:
```json
{
"error" : {
"root_cause" : [
{
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
],
"type" : "search_phase_execution_exception",
"reason" : "all shards failed",
"phase" : "query",
"grouped" : true,
"failed_shards" : [
{
"shard" : 0,
"index" : "i",
"node" : "a5V1eXcZRYiIk8lecjZ4Jw",
"reason" : {
"type" : "general_script_exception",
"reason" : "Failed to compile inline script [\"aaaaaaaaaaaaaaaa\"] using lang [painless]",
"caused_by" : {
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
}
}
],
"caused_by" : {
"type" : "general_script_exception",
"reason" : "Failed to compile inline script [\"aaaaaaaaaaaaaaaa\"] using lang [painless]",
"caused_by" : {
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
}
},
"status" : 500
}
```
This also fixes a bug in `ScriptService` where requests being executed
concurrently on a single node could cause a script to be compiled
multiple times (many in the case of a powerful node with many shards)
due to no synchronization between checking the cache and compiling the
script. There is now synchronization so that a script being compiled
will only be compiled once regardless of the number of concurrent
searches on a node.
Relates to #19396
Some random operations were conditionally performed in the before test, which made tests not repeatable. For instance take the seed chain to repeat a specific iteration and try to reproduce it, this conditional code would get executed in both cases when trying to isolate the failure, but not among the different iterations (as only the first method/iteration executes it), hence the failure will not reproduce.
Moved the random operations to beforeClass and left the non random part in the before method, which is needed as it depends on some method that can be overridden by subclasses.
This commit cleans up indices in a snapshot repository when all
snapshots containing the index are all deleted. Previously, empty
indices folders would lay around after all snapshots containing
them were deleted.
Adds `warnings` syntax to the yaml test that allows you to expect
a `Warning` header that looks like:
```
- do:
warnings:
- '[index] is deprecated'
- quotes are not required because yaml
- but this argument is always a list, never a single string
- no matter how many warnings you expect
get:
index: test
type: test
id: 1
```
These are accessible from the docs with:
```
// TEST[warning:some warning]
```
This should help to force you to update the docs if you deprecate
something. You *must* add the warnings marker to the docs or the build
will fail. While you are there you *should* update the docs to add
deprecation warnings visible in the rendered results.
AbstractQueryTestCase parses the main version of the query in strict mode, meaning that it will fail if any deprecated syntax is used. It should do the same for alternate versions (e.g. short versions). This is the way it is because the two alternate versions for ids query are both deprecated. Moved testing for those to a specific test method that isolates the deprecations and actually tests that the two are deprecated.
Our parsing code accepted up until now queries in the following form (note that the query starts with `[`:
```
{
"bool" : [
{
"must" : []
}
]
}
```
This would lead to a null pointer exception as most parsers assume that the field name ("must" in this example) is the first thing that can be found in a query if its json is valid, hence always non null while parsing. Truth is that the additional array layer doesn't make the json invalid, hence the following code fragment would cause NPE within ParseField, because null gets passed to `parseContext.isDeprecatedSetting`:
```
if (token == XContentParser.Token.FIELD_NAME) {
currentFieldName = parser.currentName();
} else if (parseContext.isDeprecatedSetting(currentFieldName)) {
// skip
} else if (token == XContentParser.Token.START_OBJECT) {
```
We could add null checks in each of our parsers in lots of places, but we rely on `currentFieldName` being non null in all of our parsers, and we should consider it a bug when these unexpected situations are not caught explicitly. It would be best to find a way to prevent such queries altogether without changing all of our parsers.
The reason why such a query goes through is that we've been allowing a query to start with either `[` or `{`. The only reason I found is that we accept `match_all : []`. This seems like an undocumented corner case that we could drop support for. Then we can be stricter and accept only `{` as start token of a query. That way the only next token that the parser can encounter if the json is valid (otherwise the json parser would barf earlier) is actually a field_name, hence the assumption that all our parser makes hold.
The downside of this is simply dropping support for `match_all : []`
Relates to #12887
Old:
```
> Throwable #1: java.lang.AssertionError: expected [2xx] status code but api [reindex] returned [400 Bad Request] [{"error":{"root_cause":[{"type":"parsing_exception","reason":"[reindex] failed to parse field [dest]","line":1,"col":25}],"type":"parsing_exception","reason":"[reindex] failed to parse field [dest]","line":1,"col":25,"caused_by":{"type":"illegal_argument_exception","reason":"[dest] unknown field [asdfadf], parser not found"}},"status":400}]
> at __randomizedtesting.SeedInfo.seed([9325F8C5C6F227DD:1B71C71F680E4A25]:0)
> at org.elasticsearch.test.rest.yaml.section.DoSection.execute(DoSection.java:119)
> at org.elasticsearch.test.rest.yaml.ESClientYamlSuiteTestCase.test(ESClientYamlSuiteTestCase.java:309)
> at java.lang.Thread.run(Thread.java:745)
```
New:
```
> Throwable #1: java.lang.AssertionError: Failure at [reindex/10_basic:12]: expected [2xx] status code but api [reindex] returned [400 Bad Request] [{"error":{"root_cause":[{"type":"parsing_exception","reason":"[reindex] failed to parse field [dest]","line":1,"col":25}],"type":"parsing_exception","reason":"[reindex] failed to parse field [dest]","line":1,"col":25,"caused_by":{"type":"illegal_argument_exception","reason":"[dest] unknown field [asdfadf], parser not found"}},"status":400}]
> at __randomizedtesting.SeedInfo.seed([444DEEAF47322306:CC19D175E9CE4EFE]:0)
> at org.elasticsearch.test.rest.yaml.ESClientYamlSuiteTestCase.executeSection(ESClientYamlSuiteTestCase.java:329)
> at org.elasticsearch.test.rest.yaml.ESClientYamlSuiteTestCase.test(ESClientYamlSuiteTestCase.java:309)
> at java.lang.Thread.run(Thread.java:745)
> Caused by: java.lang.AssertionError: expected [2xx] status code but api [reindex] returned [400 Bad Request] [{"error":{"root_cause":[{"type":"parsing_exception","reason":"[reindex] failed to parse field [dest]","line":1,"col":25}],"type":"parsing_exception","reason":"[reindex] failed to parse field [dest]","line":1,"col":25,"caused_by":{"type":"illegal_argument_exception","reason":"[dest] unknown field [asdfadf], parser not found"}},"status":400}]
> at org.elasticsearch.test.rest.yaml.section.DoSection.execute(DoSection.java:119)
> at org.elasticsearch.test.rest.yaml.ESClientYamlSuiteTestCase.executeSection(ESClientYamlSuiteTestCase.java:325)
> ... 37 more
```
Sorry for the longer stack trace, but I wanted to be sure I didn't throw
anything away by accident.
Currently any code that wants to added NamedWriteables to the
NamedWriteableRegistry can do so via guice injection of the registry,
and registering at construction time. However, this makes the registry
complex: it has both get and register methods synchronized, and there is
likely contention on the read side from multiple threads. The
registration has mostly already been contained to guice modules at node
construction time.
This change makes the registry immutable, taking all of the
NamedWriteable readers at construction time. It also allows plugins to
added arbitrary named writables that it may use in its own transport
actions.
conform with the requirements of the writeBlob method by
throwing a FileAlreadyExistsException if attempting to write
to a blob that already exists. This change means implementations
of BlobContainer should never overwrite blobs - to overwrite a
blob, it must first be deleted and then can be written again.
Closes#15579
After #13834 many tests that used Groovy scripts (for good or bad reason) in their tests have been moved in the lang-groovy module and the issue #13837 has been created to track these messy tests in order to clean them up.
The work started with #19280, #19302 and #19336 and this PR moves the remaining messy tests back in core, removes the dependency on Groovy, changes the scripts in order to use the mocked script engine, and change the tests to integration tests.
It also moves IndexLookupIT test back (even if it has good chance to be removed soon) and fixes its tests.
It also changes AbstractQueryTestCase to use custom script plugins in tests.
closes#13837
* Rename operation to result and reworking responses
* Rename DocWriteResponse.Operation enum to DocWriteResponse.Result
These are just easier to interpret names.
Closes#19664
This is cleanup work from #19566, where @nik9000 suggested trying to nuke the isCreated and isFound methods. I've combined nuking the two methods with removing UpdateHelper.Operation in favor of DocWriteResponse.Operation here.
Closes#19631.
This removes two packages, consolidating them into their parent package
and adds `package-info.java` files to describe all of the packages under
`org.elasticsearch.test.rest`.
The tests for authentication extend ESIntegTestCase and use a mock
authentication plugin. This way the clients don't have to worry about
running it. Sadly, that means we don't really have good coverage on the
REST portion of the authentication.
This also adds ElasticsearchStatusException, and exception on which you
can set an explicit status. The nice thing about it is that you can
set the RestStatus that it returns to whatever arbitrary status you like
based on the status that comes back from the remote system.
reindex-from-remote then uses it to wrap all remote failures, preserving
the status from the remote Elasticsearch or whatever proxy is between us
and the remove Elasticsearch.
This makes it obvious that these tests are for running the client yaml
suites. Now that there are other ways of running tests using the REST
client against a running cluster we can't go on calling the shared
client yaml tests "REST tests". They are rest tests, but they aren't
**the** rest tests.
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
After #13834 many tests that used Groovy scripts (for good or bad reason) in their tests have been moved in the lang-groovy module and the issue #13837 has been created to track these messy tests in order to clean them up.
This commit moves more tests back in core, removes the dependency on Groovy, changes the scripts in order to use the mocked script engine, and change the tests to integration tests.
With #19140 we started persisting the node ID across node restarts. Now that we have a "stable" anchor, we can use it to generate a stable default node name and make it easier to track nodes over a restarts. Sadly, this means we will not have those random fun Marvel characters but we feel this is the right tradeoff.
On the implementation side, this requires a bit of juggling because we now need to read the node id from disk before we can log as the node node is part of each log message. The PR move the initialization of NodeEnvironment as high up in the starting sequence as possible, with only one logging message before it to indicate we are initializing. Things look now like this:
```
[2016-07-15 19:38:39,742][INFO ][node ] [_unset_] initializing ...
[2016-07-15 19:38:39,826][INFO ][node ] [aAmiW40] node name set to [aAmiW40] by default. set the [node.name] settings to change it
[2016-07-15 19:38:39,829][INFO ][env ] [aAmiW40] using [1] data paths, mounts [[ /(/dev/disk1)]], net usable_space [5.5gb], net total_space [232.6gb], spins? [unknown], types [hfs]
[2016-07-15 19:38:39,830][INFO ][env ] [aAmiW40] heap size [1.9gb], compressed ordinary object pointers [true]
[2016-07-15 19:38:39,837][INFO ][node ] [aAmiW40] version[5.0.0-alpha5-SNAPSHOT], pid[46048], build[473d3c0/2016-07-15T17:38:06.771Z], OS[Mac OS X/10.11.5/x86_64], JVM[Oracle Corporation/Java HotSpot(TM) 64-Bit Server VM/1.8.0_51/25.51-b03]
[2016-07-15 19:38:40,980][INFO ][plugins ] [aAmiW40] modules [percolator, lang-mustache, lang-painless, reindex, aggs-matrix-stats, lang-expression, ingest-common, lang-groovy, transport-netty], plugins []
[2016-07-15 19:38:43,218][INFO ][node ] [aAmiW40] initialized
```
Needless to say, settings `node.name` explicitly still works as before.
The commit also contains some clean ups to the relationship between Environment, Settings and Plugins. The previous code suggested the path related settings could be changed after the initial Environment was changed. This did not have any effect as the security manager already locked things down.
#19096 introduced a generic TCPTransport base class so we can have multiple TCP based transport implementation. These implementations can vary in how they respond internally to situations where we concurrently send, receive and handle disconnects and can have different exceptions. However, disconnects are important events for the rest of the code base and should be distinguished from other errors (for example, it signals TransportMasterAction that it needs to retry and wait for the a (new) master to come back). Therefore, we should make sure that all the implementations do the proper translation from their internal exceptions into ConnectTransportException which is used externally.
Similarly we should make sure that the transport implementation properly recognize errors that were caused by a disconnect as such and deal with them correctly. This was, for example, the source of a build failure at https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+master+multijob-intake/1080 , where a concurrency issue cause SocketException to bubble out of MockTcpTransport.
This PR adds a tests which concurrently simulates connects, disconnects, sending and receiving and makes sure the above holds. It also fixes anything (not much!) that was found it.
* rethrow script compilation exceptions into ingest configuration exceptions
* update readProcessor to rethrow any exception as an ElasticsearchException
We throw IOException, which is the exception that is going to be thrown in 99% of the cases. A more generic exception can happen, and if it is a runtime one we just let it bubble up as is, otherwise we wrap it into runtime one so that we don't require to catch Exception everywhere, which seems odd.
Also adjusted javadocs for all performRequest methods
With the introduction of the async client, ResponseException doesn't eagerly read the response body anymore into a string. That is better, but raised a problem in our REST tests infra: we were reading the response body twice, while it can only be consumed once. Introduced a RestTestResponseException that wraps a ResponseException and exposes the body which now gets read only once.
The new method accepts the usual parameters (method, endpoint, params, entity and headers) plus a response listener and an async response consumer. Shortcut methods are also added that don't require params, entity and the async response consumer optional.
There are a few relevant api changes as a consequence of the move to async client that affect sync methods:
- Response doesn't implement Closeable anymore, responses don't need to be closed
- performRequest throws Exception rather than just IOException, as that is the the exception that we get from the FutureCallback#failed method in the async http client
- ssl configuration is a bit simpler, one only needs to call setSSLStrategy from a custom HttpClientConfigCallback, that doesn't end up overridng any other default around connection pooling (it used to happen with the sync client and make ssl configuration more complex)
Relates to #19055
We used to mutate it as part of building the aggregation. That
caused assertVersionSerializable to fail because it assumes that
requests aren't mutated after they are sent.
Closes#19481
The `client/transport` project adds a new jar build project that
pulls in all dependencies and configures all required modules.
Preinstalled modules are:
* transport-netty
* lang-mustache
* reindex
* percolator
The `TransportClient` classes are still in core
while `TransportClient.Builder` has only a protected construcutor
such that users are redirected to use the new `TransportClientBuilder`
from the new jar.
Closes#19412
* Removed `Template` class and unified script & template parsing logic. Templates are scripts, so they should be defined as a script. Unless there will be separate template infrastructure, templates should share as much code as possible with scripts.
* Removed ScriptParseException in favour for ElasticsearchParseException
* Moved TemplateQueryBuilder to lang-mustache module because this query is hard coded to work with mustache only
Before returning, index creation now waits for the configured number
of shard copies to be started. In the past, a client would create an
index and then potentially have to check the cluster health to wait
to execute write operations. With the cluster health semantics changing
so that index creation does not cause the cluster health to go RED,
this change enables waiting for the desired number of active shards
to be active before returning from index creation.
Relates #9126
Also introduced a `Processor.Parameters` class that is holder for several services processors rely on,
the IngestPlugin#getProcessors(...) method has been changed to accept `Processor.Parameters` instead
of each service seperately.
This commit renames the Netty 3 transport module from transport-netty to
transport-netty3. This is to make room for a Netty 4 transport module,
transport-netty4.
Relates #19439
Today `node.mode` and `node.local` serve almost the same purpose, they
are a shortcut for `discovery.type` and `transport.type`. If `node.local: true`
or `node.mode: local` is set elasticsearch will start in _local_ mode which means
only nodes within the same JVM are discovered and a non-network based transport
is used. The _local_ mode it only really used in tests or if nodes are embedded.
For both, embedding and tests explicit configuration via `discovery.type` and `transport.type`
should be preferred.
This change removes all the usage of these settings and by-default doesn't
configure a default transport implemenation since netty is now a module. Yet, to make
the user expericence flawless, plugins or modules can set a `http.type.default` and
`transport.type.default`. Plugins set this via `PluginService#additionalSettings()`
which enforces _set-once_ which prevents node startup if set multiple times. This means
that our distributions will just startup with netty transport since it's packaged as a
module unless `transport.type` or `http.transport.type` is explicitly set.
This change also found a bunch of bugs since several NamedWriteables were not registered if a
transport client is used. Now that we don't rely on the `node.mode` leniency which is inherited
instead of using explicit settings, `TransportClient` uses `AssertingLocalTransport` which detects these problems since it serializes all messages.
Closes#16234
This moves all netty related code into modules/transport-netty the module is build as a zip file as well as a JAR to serve as a dependency for transport client. For the time being this is required otherwise we have no network based impl. for transport client users. This might be subject to change given that we move forward http client.
Some tests still start http implicitly or miss configuring the transport clients correctly.
This commit fixes all remaining tests and adds a depdenceny to `transport-netty` from
`qa/smoke-test-http` and `modules/reindex` since they need an http server running on the nodes.
This also moves all required permissions for netty into it's module and out of core.
That exception is currently serialized as its current base class IllegalStateException which confuses code supposed to deal with the stepping down of a master. This is an important exception and we should be able to serialize it correctly. This commit fixes it by moving the exception to inherit from ElasticsearchException and properly register it.
As a bonus I adapted CapturingTransport to properly simulate serialized exceptions.
The callback replaces the ability to fully replace the http client instance. By doing that, one used to lose any default that the RestClient had set for the underlying http client. Given that you'd usually override one or two things only, like a couple of timeout values, the ssl factory or the default credentials providers, it is not uder friendly if by doing that users end up replacing the whole http client instance and lose any default set by us.
Switches most search behavior extensions from push (`onModule(SearchModule)`)
to pull (`implements SearchPlugin`). This effort in general gives plugin
authors a much cleaner view of how to extend Elasticsearch and starts to
set up portions of Elasticsearch as "the plugin API". This commit in
particular does that for search-time behavior like customized suggesters,
highlighters, score functions, and significance heuristics.
It also switches most such customization to being done at search module
construction time which is much, much easier to reason about from a testing
perspective. It also helps significantly in the process of de-guice-ing
Elasticsearch's startup.
There are at least two major search time extensions that aren't covered in
this commit that will simply have to wait for the next commit on the topic
because this one has already grown large: custom aggregations and custom
queries. These will likely live in the same SearchPlugin interface as well.
This change adds a createComponents() method to Plugin implementations
which they can use to return already constructed componenents/services.
Eventually this should be just services ("components" don't really do
anything), but for now it allows any object so that preconstructed
instances by plugins can still be bound to guice. Over time we should
add basic services as arguments to this method, but for now I have left
it empty so as to not presume what is a necessary service.
If the allocation decision for a primary shard was NO, this should
cause the cluster health for the shard to go RED, even if the shard
belongs to a newly created index or is part of cluster recovery.
Relates #9126
Previously, index creation would momentarily cause the cluster health to
go RED, because the primaries were still being assigned and activated.
This commit ensures that when an index is created or an index is being
recovered during cluster recovery and it does not have any active
allocation ids, then the cluster health status will not go RED, but
instead be YELLOW.
Relates #9126
this commit moves the most of the http related integ tests out into it's own
`qa/smoke-test-http` project where most of the test can run against the external cluster.
Today we have a bunch of tests that use netty transport for several reasons
these tests use it because they need to run some tcp based transport. Yet, this
couples our tests tightly to the netty implementation which should be tested on it's own.
This change adds a plain socket based blocking TcpTransport implementation that is used by
default in tests if local transport is suppressed or if network is selected.
It also adds another tcp network implementation as a showcase how the interface works.
Today when a thread encounters a fatal unrecoverable error that
threatens the stability of the JVM, Elasticsearch marches on. This
includes out of memory errors, stack overflow errors and other errors
that leave the JVM in a questionable state. Instead, the Elasticsearch
JVM should die when these errors are encountered. This commit causes
this to be the case.
Relates #19272
This commit moves back some messy tests that have been placed in lang-groovy module in https://github.com/elastic/elasticsearch/pull/13834. It removes the dependency on Groovy plugin as well as change back the tests to integration tests (IT suffix).
It also changes the current MockScriptEngine and MockScriptPlugin to make it easier to use.
* master: (192 commits)
[TEST] Fix rare OBOE in AbstractBytesReferenceTestCase
Reindex from remote
Rename writeThrowable to writeException
Start transport client round-robin randomly
Reword Refresh API reference (#19270)
Update fielddata.asciidoc
Fix stored_fields message
Add missing footer notes in mapper size docs
Remote BucketStreams
Add doc values support to the _size field in the mapper-size plugin
Bump version to 5.0.0-alpha5.
Update refresh.asciidoc
Update shrink-index.asciidoc
Change Debian repository for Vagrant debian-8 box
[TEST] fix test to account for internal empyt reference optimization
Upgrade to netty 3.10.6.Final (#19235)
[TEST] fix histogram test when extended bounds overlaps data
Remove redundant modifier
Simplify TcpTransport interface by reducing send code to a single send method (#19223)
Fix style violation in InstallPluginCommand.java
...
This adds a remote option to reindex that looks like
```
curl -POST 'localhost:9200/_reindex?pretty' -d'{
"source": {
"remote": {
"host": "http://otherhost:9200"
},
"index": "target",
"query": {
"match": {
"foo": "bar"
}
}
},
"dest": {
"index": "target"
}
}'
```
This reindex has all of the features of local reindex:
* Using queries to filter what is copied
* Retry on rejection
* Throttle/rethottle
The big advantage of this version is that it goes over the HTTP API
which can be made backwards compatible.
Some things are different:
The query field is sent directly to the other node rather than parsed
on the coordinating node. This should allow it to support constructs
that are invalid on the coordinating node but are valid on the target
node. Mostly, that means old syntax.
This commit renames writeThrowable to writeException. The situation here
stems from the fact that the StreamOutput method for serializing
Exceptions needs to accept Throwables too as Throwables can be the cause
of serialized Exceptions. Yet, we do not serialize Throwables in the
Error sub-hierarchy in a way that they can be deserialized into their
initial type. This leads to an asymmetry in the StreamOutput method for
serializing Exceptions and the StreamInput method for writing
Excpetions. Namely, the former will accept Throwables but the latter
will only return Exceptions. A goal with the stream methods has always
been symmetry in the method names so that serialization/deserialization
routines appear symmetrical in code. It is this asymmetry on the
input/output types for Exceptions on StreamOutput/StreamInput that
clashes with the desired symmetry of naming. Despite this, we should
favor symmetry in the naming of the methods. This commit renames
StreamOutput#writeThrowable to StreamOutput#writeException which leaves
us with Exception StreamInput#readException and void
StreamOutput#writeException(Throwable).
Node IDs are currently randomly generated during node startup. That means they change every time the node is restarted. While this doesn't matter for ES proper, it makes it hard for external services to track nodes. Another, more minor, side effect is that indexing the output of, say, the node stats API results in creating new fields due to node ID being used as keys.
The first approach I considered was to use the node's published address as the base for the id. We already [treat nodes with the same address as the same](https://github.com/elastic/elasticsearch/blob/master/core/src/main/java/org/elasticsearch/discovery/zen/NodeJoinController.java#L387) so this is a simple change (see [here](https://github.com/elastic/elasticsearch/compare/master...bleskes:node_persistent_id_based_on_address)). While this is simple and it works for probably most cases, it is not perfect. For example, if after a node restart, the node is not able to bind to the same port (because it's not yet freed by the OS), it will cause the node to still change identity. Also in environments where the host IP can change due to a host restart, identity will not be the same.
Due to those limitation, I opted to go with a different approach where the node id will be persisted in the node's data folder. This has the upside of connecting the id to the nodes data. It also means that the host can be adapted in any way (replace network cards, attach storage to a new VM). I
It does however also have downsides - we now run the risk of two nodes having the same id, if someone copies clones a data folder from one node to another. To mitigate this I changed the semantics of the protection against multiple nodes with the same address to be stricter - it will now reject the incoming join if a node exists with the same id but a different address. Note that if the existing node doesn't respond to pings (i.e., it's not alive) it will be removed and the new node will be accepted when it tries another join.
Last, and most importantly, this change requires that *all* nodes persist data to disk. This is a change from current behavior where only data & master nodes store local files. This is the main reason for marking this PR as breaking.
Other less important notes:
- DummyTransportAddress is removed as we need a unique network address per node. Use `LocalTransportAddress.buildUnique()` instead.
- I renamed `node.add_lid_to_custom_path` to `node.add_lock_id_to_custom_path` to avoid confusion with the node ID which is now part of the `NodeEnvironment` logic.
- I removed the `version` paramater from `MetaDataStateFormat#write` , it wasn't really used and was just in the way :)
- TribeNodes are special in the sense that they do start multiple sub-nodes (previously known as client nodes). Those sub-nodes do not store local files but derive their ID from the parent node id, so they are generated consistently.
Today throughout the codebase, catch throwable is used with reckless
abandon. This is dangerous because the throwable could be a fatal
virtual machine error resulting from an internal error in the JVM, or an
out of memory error or a stack overflow error that leaves the virtual
machine in an unstable and unpredictable state. This commit removes
catch throwable from the codebase and removes the temptation to use it
by modifying listener APIs to receive instances of Exception instead of
the top-level Throwable.
Relates #19231
The only reason for LifecycleComponent taking a generic type was so that
it could return that type on its start and stop methods. However, this
chaining has no practical necessity. Instead, start and stop can be
void, and a whole bunch of confusing generics disappear.
This allowes embedding stash keys in string like `t${key}est`. This
allows simple string concatenation like acitons.
The test for this is in `ObjectPathTests` because `Stash` doesn't seem
to have a test on its own and it is simple enough to test embedded
stashes this way. And this is a way I expect them to be used eventually.
BytesReference should be a really simple interface, yet it has a gazillion
ways to achieve the same this. Methods like `#hasArray`, `#toBytesArray`, `#copyBytesArray`
`#toBytesRef` `#bytes` are all really duplicates. This change simplifies the interface
dramatically and makes implementations of it much simpler. All array access has been removed
and is streamlined through a single `#toBytesRef` method. Utility methods to materialize a
compact byte array has been added too for convenience.
When we introduced docs testing we added a special case for $body in Stash, so that the last stashed body could be evaluated, and expressions like "$body.took" could be extracted out of it. We can instead do that for any object in the stash, by simply wrapping the internal map in an ObjectPath instance. We can then drop the special stashResponse method and go back to using the ordinary stashValue too.
The downside of this change is that it adds a feature that may not be supported by other REST test runners, namely the evaluation of compouned paths from the stash. If we have "object" stashed as an object, it is now possible to extract directly each subobject of it as well e.g. "object.subobject.field1". None of the current REST tests rely on this, but our docs snippets tests do.
No need to match against yaml responses via regexes in REST tests, yaml responses can be properly parsed via ObjectPath instead. Few REST tests need to be updated accordingly.
We are going to parse the body anyways whenever it's in json format as it is going to be stashed. It is not useful to lazily parse it anymore. Also this allows us to not rely on automatic detection of the xcontent type based on the content of the response, but rather read the content type from the response headers.
ObjectPath used a Map up until now for the internal representation of its navigable object. That works in most of the cases, but there could also be an array as root object, in which case a List needs to be used instead of a Map. This commit changes the internal representation of the object to Object which can either be a List or a Map. The change is minimal as ObjectPath already had the checks in place to verify the type of the object in the current position and navigate through it.
Note: The new test added to ObjectPathTest uses yaml format explicitly as auto-detection of json format works only for a json object that starts with '{', not if the root object is actually an array and starts with '['.
The internal representation of the object that JsonPath gives access to is a map. That is independent of the initial input format, which is json but could also be yaml etc.
This commit renames JsonPath to ObjectPath and adds a static method to create an ObjectPath from an XContent
We introduced a special response_body assertion to test our docs snippets. The match assertion does the same job though and can be reused and adapted where needed. ResponseBodyAssertion contains provides much better and accurate errors though, which can be now utilized in MatchAssertion so that many more REST tests can benefit from readable error messages.
Each response body gets always stashed and can be retrieved for later evaluations already. Instead of providing the response body as strings that get parsed to json objects separately, then converted to maps as ResponseBodyAssertion did, we parse everything once, the json is part of the yaml test, which is supported. The only downside is that json comments cannot be used, rather yaml comments should be used (// C style vs # ). There were only two docs tests that were using comments in ingest-node.asciidoc where I went ahead and remove the comments which didn't seem that useful anyways.
Raise IOException on deleteBlob if the blob doesn't exist
This commit raises an IOException on BlobContainer#deleteBlob
if the blob does not exist, in conformance with the BlobContainer
interface contract. Each implementation of BlobContainer now
conforms to this contract (file system, S3, Azure, HDFS). This
commit also contains blob container tests for each of the
repository implementations.
Closes#18530
We'll migrate to NamedWriteable so we can share code with the rest
of the system. So we can work on this in multiple pull requests without
breaking Elasticsearch in between the commits this change supports
*both* old style `InternalAggregations.stream` serialization and
`NamedWriteable` style serialization. As such it creates about a
half dozen `// NORELEASE` comments that will have to be removed
once the migration is complete.
This also introduces a boolean `transportClient` flag to `SearchModule`
which is used to skip inappropriate registrations for for the
transport client while still registering the things it needs. In
this case that means that the `InternalAggregation` subclasses are
registered with the `NamedWriteableRegistry` but the `AggregationBuilder`
subclasses are not.
Finally, this moves aggregation registration from guice configuration
time to `SearchModule` construction time. This will make it simpler to
work with in the future as we further clean up Elasticsearch's
extension points.
We have long worked to capture different partitioning scenarios in our testing infra. This PR adds a new variant, inspired by the Jepsen blogs, which was forgotten far - namely a partition where one node can still see and be seen by all other nodes. It also updates the resiliency page to better reflect all the work that was done in this area.
This commits adds support for a `teardown` section that can be defined in REST tests to
clean up any items that may have been created by the test and are not cleaned up by
deletion of indices and templates.
Today we have a ton of logic inside the NettyTransport* codebase. The footprint
of the code that has a direct netty dependency is large and alternative implementations
are pretty hard today since they need to know all about our proticol etc.
This change moves most of the code into TCPTransport* baseclasses and moves all
the protocol send code together. The base classes now contain the majority of the logic
while NettyTransport* classes remain to implement the glue code, configuration and optimization.
The factory for ingest processor is generic, but that is only for the
return type of the create mehtod. However, the actual consumer of the
factories only cares about Processor, so generics are not needed.
This change removes the generic type from the factory. It also removes
AbstractProcessorFactory which only existed in order pull the optional
tag from config. This functionality is moved to the caller of the
factories in ConfigurationUtil, and the create method now takes the tag.
This allows the covariant return of the implementation to work with
tests not needing casts.
The ChannelBuffer interface today leaks into the BytesReference abstraction
which causes a hard dependency on Netty across the board. This chance moves
this dependency and all BytesReference -> ChannelBuffer conversion into
NettyUtlis and removes the abstraction leak on BytesReference.
This change also removes unused methods on the BytesReference interface
and simplifies access to internal pages.
It was inadvertently disabled after applying code review comments. This commit reenables the logger usage checker and makes it less naggy when encountering logging usages of the form logger.info(someStringBuilder). Previously it would fail with the error message "First argument must be a string constant so that we can statically ensure proper place holder usage". Now it will only fail in case any arguments are provided as well, for example logger.info(someStringBuilder, 42).
The plan for persistent node ids ( #17811 ) is to tie the node identity to a file stored in it's data folders. As such it becomes important that nodes in our testing infra have better affinity with their data folders and that their data folders are not cleaned underneath them. The first is important because we fix the random seed used for node id generation (for reproducibility) and allowing the same node to use two different data folders causes two separate nodes to have the same id, which prevents the cluster from forming. The second is important, for example, where a full cluster restart / single node restart need to maintain node identity and wiping the data folders at the wrong moment prevents this.
Concretely this commit does the following:
1) Remove previous attempts to have data folder per role using a prefix. This wasn't effective as it was using the data paths settings which are only used for part of the runs. An attempt to completely separate the paths via the home dir failed due to assumptions made by index custom path about node data folder ordinal uniqueness (see #19076)
2) Change full cluster restarts to start up nodes in the same order their were first created in, only randomly swapping nodes with the same roles.
3) Change test cluster reset methods to first shutdown the unneeded nodes and then re-start the shared nodes that were shut down, so they'll reclaim their data folders.
4) Improve data folder wiping logic and make sure it wipes only folders of "offline" nodes.
5) Add some very basic tests
This commit modifies TimeValue parsing to keep the input time unit. This
enables round-trip parsing from instances of String to instances of
TimeValue and vice-versa. With this, this commit removes support for the
unit "w" representing weeks, and also removes support for fractional
values of units (e.g., 0.5s).
Relates #19102
#18938 has changed the timing in which we send out to nodes to fetch their shard stores. Instead of doing this after the cluster state resulting of the node's join was published, #18938 made it be sent concurrently to the publishing processes. This revealed a couple of points where the shard store fetching is dependent of the current state of affairs of the cluster state, both on the master and the data nodes. The problem discovered were already present without #18938 but required a failure/extreme situations to make them happen.This PR tries to remove as much as possible of these dependencies making shard store fetching simpler and make the way to re-introduce #18938 which was reverted.
These are the notable changes:
1) Allow TransportNodesAction (of which shard store fetching is derived) callers to supply concrete disco nodes, so it won't need the cluster state to resolve them. This was a problem because the cluster state containing the needed nodes was not yet made available through ClusterService. Note that long term we can expect the rest layer to resolve node ids to concrete nodes, making this mode the only one needed.
2) The data node relied on the cluster state to have the relevant index meta data so it can find data when custom paths are used. We now fall back to read the meta data from disk if needed.
3) The data node was relying on it's own IndexService state to indicate whether the data it has corresponds to an existing allocation. This is of course something it can not know until it got (and processed) the new cluster state from the master. This flag in the response is now removed. This is not a problem because we used that flag to protect against double assigning of a shard to the same node, but we are already protected from it by the allocation deciders.
4) I removed the redundant filterNodeIds method in TransportNodesAction - if people want to filter they can override resolveRequest.
Instead of plugins calling `registerTokenizer` to extend the analyzer
they now instead have to implement `AnalysisPlugin` and override
`getTokenizer`. This lines up extending plugins in with extending
scripts. This allows `AnalysisModule` to construct the `AnalysisRegistry`
immediately as part of its constructor which makes testing anslysis
much simpler.
This also moves the default analysis configuration into `AnalysisModule`
which is how search is setup.
Like `ScriptModule`, `AnalysisModule` no longer extends `AbstractModule`.
Instead it is only responsible for building `AnslysisRegistry`. We still
bind `AnalysisRegistry` but we only do so in `Node`. This is means it
is available at module construction time so we slowly remove the need to
bind it in guice.
* master: (416 commits)
docs: removed obsolete information, percolator queries are not longer loaded into jvm heap memory.
Upgrade JNA to 4.2.2 and remove optionality
[TEST] Increase timeouts for Rest test client (#19042)
Update migrate_5_0.asciidoc
Add ThreadLeakLingering option to Rest client tests
Add a MultiTermAwareComponent marker interface to analysis factories. #19028
Attempt at fixing IndexStatsIT.testFilterCacheStats.
Fix docs build.
Move templates out of the Search API, into lang-mustache module
revert - Inline reroute with process of node join/master election (#18938)
Build valid slices in SearchSourceBuilderTests
Docs: Convert aggs/misc to CONSOLE
Docs: migration notes for _timestamp and _ttl
Group client projects under :client
[TEST] Add client-test module and make client tests use randomized runner directly
Move upgrade test to upgrade from version 2.3.3
Tasks: Add completed to the mapping
Fail to start if plugin tries broken onModule
Remove duplicated read byte array methods
Rename `fields` to `stored_fields` and add `docvalue_fields`
...
This is the same as what Lucene does for its analysis factories, and we hawe
tests that make sure that the elasticsearch factories are in sync with
Lucene's. This is a first step to move forward on #9978 and #18064.
This commit moves template support out of the Search API to its own dedicated Search Template API in the lang-mustache module. It provides a new SearchTemplateAction that can be used to render templates before it gets delegated to the usual Search API. The current REST endpoint are identical, but the Render Search Template endpoint now uses the same Search Template API with a new "simulate" option. When this option is enabled, the Search Template API only renders template and returns immediatly, without executing the search.
Closes#17906
:client ---------> :client:rest
:client-sniffer -> :client:sniffer
:client-test ----> :client:test
This lines the client up with how we do things like modules and
plugins.
This changes adds a MapperPlugin interface which allows pull style
retrieval of mappers and metadata mappers added by plugins. For now, I
have kept the MapperRegistry, but this should be removed in the future
as it is just a silly container for 2 maps which could themselves be
passed around.
Makes ScriptModule just a plain class that manages building the
ScriptSettings and ScriptService from plugins. When we *need*
to bind ScriptService with guice we bind it in a lambda.
Significantly quiets the logging of the docs tests by:
1. Switching two log statements to debug level.
2. Only calling ESTestCase#afterIfFailed if the test failure wasn't
just assumptions being violated.
We pretended to be able to ackt like a different version node for so long it's
time to be honest and remove this ability. It's just confusing and where needed
and tested we should build dedicated extension points.
This commit introduce unit testing infrastructure to test replication operations using real index shards. This is infra is complementary to the full integration tests and unit testing of ReplicationOperation we already have. The new ESIndexLevelReplicationTestCase base makes it easier to test and simulate failure mode that require real shards and but do not need the full blow stack of a complete node.
The commit also add a simple "nothing is wrong" test plus a test that checks we don't drop docs during the various stages of recovery.
For now, only single doc indexing is supported but this can be easily extended in the future.
This change removes some unnecessary dependencies from ClusterService
and cleans up ClusterName creation. ClusterService is now not created
by guice anymore.
Today we have a push model for registering basically anything. All our extension points
are defined on modules which we pass in to plugins. This is harder to maintain and adds
unnecessary dependencies on the modules itself. This change moves towards a pull model
where the plugin offers a getter kind of method to get the extensions. This will also
help in the future if we need to pass dependencies to the extension points which can
easily be defined on the method as arguments if a pull model is used.
Registering a script engine or native scripts still uses Guice today
and is much more complicated than needed. This change moves to a pull
based model where script plugins have to implement a dedicated interface
`ScriptPlugin` and defines simple getter returning instances rather than
classes.
In 2.0 we added plugin descriptors which require defining a name and
description for the plugin. However, we still have name() and
description() which must be overriden from the Plugin class. This still
exists for classpath plugins. But classpath plugins are mainly for
tests, and even then, referring to classpath plugins with their class is
a better idea. This change removes name() and description(), replacing
the name for classpath plugins with the full class name.
With this commit we exclude certain HTTP requests that are needed to inspect the cluster
from HTTP request limiting to ensure these commands are processed even in critical
memory conditions.
Relates #17951, relates #18145, closes#18833
This will let things that don't depend on :test:framework like the
client use it.
Also skip initializing the classes we check because we don't care
about their initialization behavior because we're not executing them.
This makes the naming conventions check pretty close to instant
from a "human eye" perspective.
* master: (51 commits)
Switch QueryBuilders to new MatchPhraseQueryBuilder
Added method to allow creation of new methods on-the-fly.
more cleanups
Remove cluster name from data path
Remove explicit parallel new GC flag
rehash the docvalues in DocValuesSliceQuery using BitMixer.mix instead of the naive Long.hashCode.
switch FunctionRef over to methodhandles
ingest: Move processors from core to ingest-common module.
Fix some typos (#18746)
Fix ut
convert FunctionRef/Def usage to methodhandles.
Add the ability to partition a scroll in multiple slices. API:
use painless types in FunctionRef
Update ingest-node.asciidoc
compute functional interface stuff in Definition
Use method name in bootstrap check might fork test
Make checkstyle happy (add Lookup import, line length)
Don't hide LambdaConversionException and behave like real javac compiled code when a conversion fails. This works anyways, because fallback is allowed to throw any Throwable
Pass through the lookup given by invokedynamic to the LambdaMetaFactory. Without it real lambdas won't work, as their implementations are private to script class
checkstyle have your upper L
...
Folded grok processor into ingest-common module.
The rest tests have been moved to ingest-common module as well, because these tests don't run in the rest-api-spec module but in the distribution:integ-test-zip module
and adding a test plugin there felt just wrong to me. I think this is ok. I left a tiny ingest rest test behind in that tests with an empty pipeline.
Removed messy tests, these tests were already covered in the rest tests
Added ingest test plugin in test infra so that each module testing integration with ingest doesn't need write its own plugin
Moved reindex ingest tests to qa module
Closes#18490
This commit refactors the handling of thread pool settings so that the
individual settings can be registered rather than registering the top
level group. With this refactoring, individual plugins must now register
their own settings for custom thread pools that they need, but a
dedicated API is provided for this in the thread pool module. This
commit also renames the prefix on the thread pool settings from
"threadpool" to "thread_pool". This enables a hard break on the settings
so that:
- some of the settings can be given more sensible names (e.g., the max
number of threads in a scaling thread pool is now named "max" instead
of "size")
- change the soft limit on the number of threads in the bulk and
indexing thread pools to a hard limit
- the settings names for custom plugins for thread pools can be
prefixed (e.g., "xpack.watcher.thread_pool.size")
- remove dynamic thread pool settings
Relates #18674
* master: (184 commits)
Add back pending deletes (#18698)
refactor matrix agg documentation from modules to main agg section
Implement ctx.op = "delete" on _update_by_query and _reindex
Close SearchContext if query rewrite failed
Wrap lines at 140 characters (:qa projects)
Remove log file
painless: Add support for the new Java 9 MethodHandles#arrayLength() factory (see https://bugs.openjdk.java.net/browse/JDK-8156915)
More complete exception message in settings tests
Use java from path if JAVA_HOME is not set
Fix uncaught checked exception in AzureTestUtils
[TEST] wait for yellow after setup doc tests (#18726)
Fix recovery throttling to properly handle relocating non-primary shards (#18701)
Fix merge stats rendering in RestIndicesAction (#18720)
[TEST] mute RandomAllocationDeciderTests.testRandomDecisions
Reworked docs for index-shrink API (#18705)
Improve painless compile-time exceptions
Adds UUIDs to snapshots
Add test rethrottle test case for delete-by-query
Do not start scheduled pings until transport start
Adressing review comments
...
Boaz Leskes
Tanguy Leroux
Adrien Grand
Simon Willnauer
javanna
Nik Everett
Colin Goodheart-Smithe
Simon Willnauer
Jason Tedor
Ali Beyad
Yannick Welsch
Luca Cavanna
Nicholas Knize
Lee Hinman
Lee Hinman
Tal Levy
Alexander Lin
Stian Lindhom
Ryan Ernst
Michael McCandless
Mike McCandless
Jim Ferenczi
Daniel Mitterdorfer
Britta Weber
David Pilato
Daniel Mitterdorfer
gfyoung
Martijn van Groningen
Honza Král
Christoph Büscher
Alexander Reelsen
jaymode
Areek Zillur