This change rejects an illegal combination of flush parameters where
force is true, but wait_if_ongoing is false. This combination is trappy
and should be forbidden.
Closes#36342
If there's an ongoing flush triggered by the translog flush threshold,
we may fail to execute a flush because waitIfOngoing is false by
default.
Relates to #36342
If a refresh, which is scheduled by the setting change, executes after
the index-2 operation and win the refresh race (i.e., maybeRefresh) with
the scheduledRefresh that we are going to check, then the latter will
return false.
Closes#39565
Relates #39462
PR #40387
A user reported that the same query that takes ~900ms when querying an index
pattern only takes ~50ms when only querying indices that have matches. The
query is a date range query and we confirmed that the `can_match` phase works
as expected. I was able to reproduce this issue locally with a single node: with
900 1-shard indices, a query to an index pattern that matches all indices runs
in ~90ms while a query to the only index that has matches runs in 0-1ms.
This ended up not being related to the `can_match` phase but to the cost of
resolving aliases when querying an index pattern that matches lots of indices.
In that case, we first resolve the index pattern to a list of concrete indices
and then for each concrete index, we check whether it was matched through an
alias, meaning we might have to apply alias filters. Unfortunately this second
per-index operation runs in linear time with the number of matched concrete
indices, which means that alias resolution runs in O(num_indices^2) overall.
So queries get exponentially slower as an index pattern matches more indices.
I reorganized alias resolution into a one-step operation that runs in linear
time with the number of matches indices, and then a per-index operation that
runs in linear time with the number of aliases of this index. This makes alias
resolution run is O(num_indices * num_aliases_per_index) overall instead. When
testing the scenario described above, the `took` went down from ~90ms to ~10ms.
It is still more than the 0-1ms latency that one gets when only querying the
single index that has data, but still much better than what we had before.
Closes#40248
If a field `field_name` was missing in a document,
doc['field_name'].get(0) incorrectly retrieved
a value of the previously accessed document.
This happened because `get(int index)` function
was just accessing `values[index]` without
checking the number of values - `count`.
This PR fixes this.
There were some test failures caused by the background retention lease sync running on a relocated
primary. This commit fixes the situation that triggered the assertion and reactivates the failing test.
Closes#40731
The Eclipse compiler (4.10, Photon) cannot build this test because it cannot
correctly infer the type arguments of the functions. Explicitely adding them
helps in this case.
This change adds the following internal refactorings:
* wraps input analyzers into an unmodifiable map in IndexAnalyzers ctor
* removes duplicated indexSetting in IndexAnalyzers
* removes references to IndexAnalyzers from DocumentMapperParser and TypeParser.ParserContext.
It can always be retrieve it from MapperService directly in those cases
It is important that resync actions are not rejected on the primary even if its
`write` threadpool is overloaded. Today we do this by exposing
`registerRequestHandlers` to subclasses and overriding it in
`TransportResyncReplicationAction`. This isn't ideal because it obscures the
difference between this action and other replication actions, and also might
allow subclasses to try and use some state before they are properly
initialised. This change replaces this override with a constructor parameter to
solve these issues.
Relates #40706
This commit deprecates versions of Java prior to Java 11. This commit
will cause a warning to be printed to standard error when any command
line tool is invoked, or when Elasticsearch is started. Additionally, we
log a deprecation message when Elasticsearch is started.
`TransportReplicationAction` is a rather complex beast, and some of its
concrete implementations do not need all of its features. More specifically, it
(a) chases a primary around the cluster until it manages to pin it down and
then (b) executes an action on that primary and all its replicas. There are
some actions that are coordinated by the primary itself, meaning that there is
no need for the chase-the-primary phases, and in the case of peer recovery
retention leases and primary/replica resync it is important to bypass these
first phases.
This commit is a step towards separating the `TransportReplicationAction` into
these two parts. It is a mostly mechanical sequence of steps to remove some
abstractions that are no longer in use.
Completion and DocStats are pulled from internal readers
instead of external since #33835 and #33847 which doesn't require
us to refresh after a stats call since refreshes will happen internally
anyhow and that will cause updated stats on ongoing indexing.
In 6.7.0 (#39378) we added a build type of DOCKER for the docker images, but
unfortunately earlier versions do not understand this and will reject any
transport messages that mention this build type.
This commit fixes this by reporting TAR instead of DOCKER when talking to older
nodes.
Relates (but does not fix) #40511
Relates #39378
In order to remain compatible with the existing joda based
implementation the parsing of milliseconds should support parsing single
digits instead of relying on three, even with strict formats.
This adds a few tests to duel against the existing joda based
implementation in order to ensure the parsing behaviour is the same.
Closes#40403
Currently, if Manifest write is unsuccessful (i.e. WriteStateException
is thrown) we perform cleanup of newly created metadata files.
However, this is wrong.
Consider the following sequence (caught by CI here
https://github.com/elastic/elasticsearch/issues/39077):
- cluster global data is written **successful**
- the associated manifest write **fails** (during the fsync, ie files
have been written)
- deleting (revert) the manifest files, **fails**, metadata is
therefore persisted
- deleting (revert) the cluster global data is **successful**
In this case, when trying to load metadata (after node restart
because of dirty WriteStateException), the following exception will
happen
```
java.io.IOException: failed to find global metadata [generation: 0]
```
because the manifest file is referencing missing global metadata file.
This commit checks if thrown WriteStateException is dirty and if its
we don't perform any cleanup, because new Manifest file might be
created, but its deletion has failed.
In the future, we might add more fine-grained check - perform the
clean up if WriteStateException is dirty, but Manifest deletion is
successful.
Closes https://github.com/elastic/elasticsearch/issues/39077
(cherry picked from commit 1fac56916bb3c4f3333c639e59188dbe743e385b)
On mapping updates the `text` field mapper does not update
the field types for the underlying prefix and phrase fields.
In practice this shouldn't be considered as a bug but we have
an assert in the code that check that field types in the mapper service
are identical to the ones present in field mappers.
When geo point parsing threw a parse exception, it did not consume
remaining tokens from the parser. This in turn meant that
indexing documents with malformed geo points into mappings with
ignore_malformed=true would fail in some cases, since DocumentParser
expects geo_point parsing to end on the END_OBJECT token.
Related to #17617
As part of #40177 we have added top-level pipeline aggs to
`InternalAggregations`. Given that `QuerySearchResult` holds an
`InternalAggregations` instance, there is no need to keep on setting
top-level pipeline aggs separately. Top-level pipeline aggs can then
always be transported through `InternalAggregations`. Such change is
made in a backwards compatible manner.
IOException are never thrown in any of the existing pipeline aggregation
builders. Removing the throws IOException from the create method allows
to remove it also from a couple of other methods which ends up simplifying
AggregationPhase (one less catch).
The cat recovery API is incredibly useful. Yet it is missing the start
and stop time as an option from the output. This commit adds these as
options to the cat recovery API. We elect to make these not visible by
default to avoid breaking the output that users might rely on.
To make script_score query to have the same features
as function_score query, we need to add randomScore
function.
This function produces different
random scores on different index shards.
It is also able to produce random scores
based on the internal Lucene Document Ids.
Today if you try and insert a very large number like `1e9999999` into a long
field we first construct this number as a `BigDecimal`, convert this to a
`BigInteger` and then reject it because it is out of range. Unfortunately
making such a large `BigInteger` is rather expensive.
We can avoid this expense by performing a (weaker) range check on the
`BigDecimal` representation of incoming `long`s too.
Relates #26137Closes#40323
In #33062 we introduced the `cluster.remote.*.proxy` setting for proxied
connections to remote clusters, but left it deliberately undocumented since it
needed followup work so that it could work with SNI. However, since #32517 is
now closed we can add this documentation and remove the comment about its lack
of documentation.
This commit fixes an edge case in tests where search hits are empty
after the merge but some shards returned hits. This can happen if
the total number of merged hits is less than the provided `from`.
Closes#40553
It initially mentioned the type in the exception because the type used to be
required to uniquely identify a document. This is not necessary anymore given
that indices have at most one type.
`Index` interns its name and uuid. My guess is that the main goal is to avoid
having duplicate strings in the representation of the cluster state. However
I doubt it helps much given that we have many other objects in the cluster state
that we don't try to reuse, and interning has some cost. When looking into
#40263 my profiler pointed to string interning because of the `Index` object
that is created in `QueryShardContext` as one of the bottlenecks of the
`can_match` phase.
Adds the search_as_you_type field type that acts like a text field optimized
for as-you-type search completion. It creates a couple subfields that analyze
the indexed terms as shingles, against which full terms are queried, and a
prefix subfield that analyze terms as the largest shingle size used and
edge-ngrams, against which partial terms are queried
Adds a match_bool_prefix query type that creates a boolean clause of a term
query for each term except the last, for which a boolean clause with a prefix
query is created.
The match_bool_prefix query is the recommended way of querying a search as you
type field, which will boil down to term queries for each shingle of the input
text on the appropriate shingle field, and the final (possibly partial) term
as a term query on the prefix field. This field type also supports phrase and
phrase prefix queries however
This commit adds an InboundHandler to handle inbound message processing.
With this commit, this code is moved out of the TcpTransport.
Additionally, finer grained unit tests are added to ensure that the
inbound processing works as expected
Replicated closed indices can't be indexed into or searched, and therefore don't need a shard with
full indexing and search capabilities allocated. We can save on a lot of heap memory for those
indices by not allocating a mapper service and caching infrastructure (which preallocates a constant
amount per instance). Before this change, a 1GB ES instance could host 250 replicated closed
metricbeat indices (each index with one shard). After this change, the same instance can host 7300
replicated closed metricbeat instances (not that this would be a recommended configuration). Most
of the remaining memory is in the cluster state and the IndexSettings object.
Switches "discovery.type: single-node" from using a separate implementation for single-node discovery to using the existing standard discovery implementation, with two small adaptions:
- auto-bootstrapping, but requiring initial_master_nodes not to be set.
- not actively pinging other nodes using the Peerfinder
- not allowing other nodes to join its single-node cluster (if they have e.g. been set up using regular discovery and connect to the single-disco node).
Currently there are some components of message serializer and sending
that still occur in TcpTransport. This commit makes it possible to
send a message without the TcpTransport by moving all of the remaining
application logic to the OutboundHandler. Additionally, it adds unit
tests to ensure that this logic works as expected.
This test inadvertently asserts that the election occurs after a master failure
is clean. However, messy elections are a fact of life so we should not fail on
a messy election.
This change moves this test away from an `AbstractDisruptionTestCase` since it
does not need the fault detector to be so enthusiastic, and weakens the
assertions to merely say that we ignore states published by the old master
without saying anything about the cleanliness of the election.
Closes#36556
Currently the TransportMessageListener is applied and used in the
Transport class. However, local requests and responses never make it to
this class. This PR moves the listener add/remove methods to the
TransportService. After this change the Transport can only have one
listener set with it. This one listener is the TransportService, which
will then propogate the events to the external listeners.
Additionally this commit back ports #40237
Remove Tracer from MockTransportService
Currently the TransportMessageListener is applied and used in the
Transport class. However, local requests and responses never make it to
this class. This PR moves the listener add/remove methods to the
TransportService. After this change the Transport can only have one
listener set with it. This one listener is the TransportService, which
will then propogate the events to the external listeners.
Java-time fails parsing composite patterns when first pattern matches only the prefix of the input. It expects pattern in longest to shortest order. Because of this constructing just one DateTimeFormatter with appendOptional is not sufficient. Parsers have to be iterated and if the parsing fails, the next one in order should be used. In order to not degrade performance parsing should not be throw exceptions on failure. Format.parseObject was used as it only returns null when parsing failed and allows to check if full input was read.
closes#39916
backport #40100
The implementation of TransportIndexAction and TransportDeleteAction as
TransportReplicationAction existed for interoperability with older 5.x nodes, as these older nodes
coordinated single index / deletes as replication requests. This BWC layer is no longer needed in 7.x,
where these single actions are now mapped to bulk requests. Completely removing the deprecated
transport actions is not possible yet if we want to keep BWC with a 6.x transport client. The best
way here is to wait for the transport client to go away and then just remove the actions.
Each cluster state publication schedules a cancellation task with the provided publication timeout
(30s by default). This scheduled cancellation keeps a reference to the publication, and therefore the
full cluster state that was published. In case of frequently updating a large cluster state, this results
in a large number of cancellation tasks keeping references to all previously published cluster states.
FilterDirectory.getPendingDeletions does not delegate, fixed
temporarily by overriding in StoreDirectory.
This in turn caused duplicate file name use after a trimUnsafeCommits
had been done, since a new IndexWriter would not consider the pending
deletes in IndexFileDeleter. This should only happen on windows (AFAIK).
Reenabled doing index updates for all tests using
IndexShardTests.indexOnReplicaWithGaps (which could fail due to above
when using mocked WindowsFS).
Added getPendingDeletions delegation to all elasticsearch
FilterDirectory subclasses that were not trivial test-only overrides to
minimize the risk of hitting this issue in another case.
This test checks that interval queries constructed against a field with no indexed
positions will throw exceptions. It uses a randomly-build IntervalsSourceProvider
against a fixed set of fields; however, the random source builder can occasionally
provide a source with a fixed field, meaning that even if the top-level query asks
for a set of intervals over a non-indexed field, the source will delegate to another
field, and no exception will be thrown.
This commit changes the test to always use a simple Match provider.
Fixes#40436
* Log Warning on Failed Blob Deletes in BlobStoreRepository
* We should not just debug log these spots, they all can and will lead to leaked files when snapshot deletion fails
Right now, the stats API only provides refresh metrics regarding
internal refreshes. This isn't very useful and somewhat misleading for
cluster administrators since the internal refreshes are not indicative
of documents being available for search.
In this PR I added a new metric for collecting external refreshes as
they occur and exposing them through the stats API. Now, calling an
endpoint for stats will yield external refresh metrics as well.
Relates #36712
In some cases, a request to perform a retention lease action can arrive
on a primary shard before it is active. In this case, the primary shard
would not yet be in primary mode, tripping an assertion in the
replication tracker. Instead, we should not attempt to perform such
actions on an initializing shard. This commit addresses this by not
returning the primary shard in the single shard iterator if the primary
shard is not yet active.
We were accidentally not mapping the index, which meant dynamic mapping
was choosing floats for the values. This led to enough loss of precision
for the aggregated values to differ slightly from the test doubles,
which accumulated into large differences in the holt output.
This test fix adds an explicit mapping.
This commit adjusts the frequency with which CCR renews retention leases
and with which primaries sync retention leases to replicas. This helps
Lucene reclaim soft-deleted documents more aggressively, which we have
found in some use-cases can help improve performance, and either way
will help keep disk space under more control.
This is the equivalent of the `field_masking_span` query, allowing users to
merge intervals from multiple fields - for example, to search for stemmed tokens
near unstemmed tokens.
Currently, we cannot update index setting index.translog.sync_interval if index is open, because it's
not dynamic which can be updated for closed index only.
Closes#32763
A recent refactoring (#37130) where imports got mixed up (changing Lucene's
IndexNotFoundException to Elasticsearch's IndexNotFoundException) led to many warnings being
logged in case of restoring a fresh snapshot.
This change adds an option to convert a `date` field to nanoseconds resolution
and a `date_nanos` field to millisecond resolution when sorting.
The resolution of the sort can be set using the `numeric_type` option of the
field sort builder. The conversion is done at the shard level and is restricted
to dates from 1970 to 2262 for the nanoseconds resolution in order to avoid
numeric overflow.
If a replica were first reset due to one primary failover and then
promoted (before resync completes), its MSU would not include changes
since global checkpoint, leading to errors during translog replay.
Fixed by re-initializing MSU before restoring local history.
Today we don't return segments stats for closed indices which makes it
hard to tell how much memory such an index would require. With this change
we return the statistics if requested by setting `include_unloaded_segments` to
true on the rest request.
Relates to #39512
Today RareClusterStateIT#testAssignmentWithJustAddedNodes fails on my Mac
because it waits for the default connection timeout of 30 seconds to connect to
a fake node with IP address 0.0.0.0. This connection attempt fails much more
quickly on Linux so the test passes.
This commit fixes this by reducing the connection timeout for this test.
Unlike index operations which can fail at the document level to
analyzing errors, delete operations should never fail at the document
level whether soft-deletes is enabled or not. With this change, we will
always fail the engine if we fail to apply a delete operation to Lucene.
Closes#33256
We currently convert pipeline aggregators to their corresponding
InternalAggregation instance as part of the final reduction phase.
They arrive to the coordinating node as part of QuerySearchResult
objects fom the shards and, despite we may incrementally reduce
aggs (hence we may have some non-final reduce and the final
one later) all the reduction phases happen on the same node.
With CCS minimizing roundtrips though, each cluster performs its
own non-final reduction, and then serializes the results back to
the CCS coordinating node which will perform the final coordination.
This breaks the assumptions made up until now around reductions
happening all on the same node.
With #40101 we have made sure that top-level pipeline aggs are not
reduced as part of the non-final reduction. The next step is to make
sure that they don't get lost, meaning that each coordinating node
needs to send them back to the CCS coordinating node as part of
the top-level `InternalAggregations` object.
Closes#40059
Today a coordinating node forces a final reduction of sibling pipeline aggregators whenever reducing aggs, unless it is reducing aggs incrementally. This works well for incremental reduction of aggs, but breaks CCS when minimizing roundtrips as each cluster ends up reducing its own pipeline aggregators locally while that should only be done by the CCS coordinating node later. This causes issues as after their reduction, pipeline aggs cannot be further reduced, which is what happens with CCS causing errors like "java.lang.UnsupportedOperationException: Not supported" being returned.
Each coordinating node should rather honour the reduce context flag that
indicates whether we are executing a final reduce or not. If not, it should leave the sibling pipeline aggregations alone.
Note that his bug affects only pipeline aggs that don't have a parent in
the aggs tree, while all the others work well.
Relates to #40059 but does not fix it yet, as the CCS coordinating node also needs to be adapted to recreate sibling pipeline aggregators from the request.
When minimizing round-trips, each cluster returns its own independent
search response. In case sort by field and/or field collapsing were
requested, when one cluster has no results to return, the information
about the field that sorting was based on (SortField array) as well as
the field (and the values) that collapsing was performed on are missing
in the search response. That causes problems as we can't build the
proper `TopDocs` instance which would need to be either `TopFieldDocs`
or `CollapseTopFieldDocs`. The merge routine expects that all the top
docs are of the same exact type which can't be guaranteed. Given that
the problematic results are empty, hence have no impact on the final
results, we can simply skip them.
Relates to #32125Closes#40067
When using DFS_QUERY_THEN_FETCH search type, the dfs phase is run and
its results are used in the query phase to make scoring accurate.
When using CCS, depending on whether the DFS phase runs in the CCS
coordinating node (like if all shards were local) or in each remote
cluster (when minimizing round-trips), scoring will differ.
This commit disables minimizing round-trips whenever DFS is requested,
as it is not currently possible to ensure that scoring is accurate in
that case.
Relates to #32125
When a node is repurposed to master/no-data or no-master/no-data, v7.x
will not start (see #37748 and #37347). The `elasticsearch repurpose`
tool can fix this by cleaning up the problematic data.
The cache used in linearizability checker now uses approximately 6x less
memory by changing the cache from a set of (bits, state) tuples into a
map from bits -> { state }.
Each combination of states is kept once only, building on the
assumption that the number of state permutations is small compared to
the number of bits permutations. For those histories that are difficult
to check we will have many bits combinations that use the same state
permutations.
We end up now using approximately 15 bytes per entry compared to 101
bytes before, ie. a 6x improvement, allowing us to linearizability check
significantly longer histories.
Re-enabled linearizability checker in CoordinatorTests, hoping above
ensures we no longer run out of memory.
Resolves#39437
We introduced WAIT_CLUSTERSTATE action in #19287 (5.0), but then stopped
using it since #25692 (6.0). This change removes that action and related
code in 7.x and 8.0.
Relates #19287
Relates #25692
This PR introduces AsyncRecoveryTarget which executes remote calls of
peer recovery asynchronously. In this change, we also add a new
assertion to ensure that method sendBatch, which sends a batch of
history operations in phase2, is never called recursively on the same
thread. This new assertion will also be used in method sendFileChunks.
This change adds a wrapper for IndexSearcher that makes IndexSearcher#search(List, Weight, Collector) visible by
sub-classes. The wrapper is used by the ContextIndexSearcher to call this protected method on a searcher created by a plugin.
This ensures that an override of the protected method in an IndexSearcherWrapper plugin is called when a search is executed.
Closes#30758
This change adds an option to the `FieldSortBuilder` that allows to transform the type
of a numeric field into another. Possible values for this option are `long` that transforms
the source field into an integer and `double` that transforms the source field into a floating point.
This new option is useful for cross-index search when the sort field is mapped differently on some
indices. For instance if a field is mapped as a floating point in one index and as an integer in another
it is possible to align the type for both indices using the `numeric_type` option:
```
{
"sort": {
"field": "my_field",
"numeric_type": "double" <1>
}
}
```
<1> Ensure that values for this field are transformed to a floating point if needed.
This commit removes the cluster state size field from the cluster state
response, and drops the backwards compatibility layer added in 6.7.0 to
continue to support this field. As calculation of this field was
expensive and had dubious value, we have elected to remove this field.
Currently, we maintain a transport name ("mock-nio", "nio", "netty")
that is passed to a `TcpTransportChannel` when a request is received.
The value of this name is to associate with the task when we register a
task with the task manager. However, it is only possible to run ES with
one transport, so having an implementation specific name is unnecessary.
This commit removes the name and replaces it with the generic
"transport".
The `sampler` agg creates a BestDocsDeferringCollector, which internally
initializes a priority queue of size `shardSize`. This queue is
populated with empty `Object` sentinels, which is roughly 16b per
object.
Similarly, the Diversified samplers create a DiversifiedTopDocsCollectors
which internally track PQ slots with ScoreDocKeys, weighing in around
28kb
If the user sets a very abusive `shard_size`, this could easily OOM
a node or cluster since these PQ are allocated up-front without
any checks.
This commit makes sure that when we create the collector, it
cannot be larger than the maxDoc so that we don't accidentally blow
up the node. We ensure the size is not greater than the overall
index maxDoc. A similar treatment is done for `maxDocsPerValue`
parameter of the diversified samplers
For good measure, this also adds in some CB accounting to try and track
memory usage.
Finally, a redundant array creation is removed to reduce a bit of
temporary memory.
We call `ensureConnections()` to undo the effects of a disruption. However, it
is possible that one or more targets are currently CONNECTING and have been
since the disruption was active, and that the connection attempt was thwarted
by a concurrent disruption to the connection. If so, we cannot simply add our
listener to the queue because it will be notified when this CONNECTING activity
completes even though it was disrupted. We must therefore wait for all the
current activity to finish and then go through and reconnect to any missing
nodes.
Closes#40030.
Today we load the shard history retention leases from disk whenever opening the
engine, and treat a missing file as an empty set of leases. However in some
cases this is inappropriate: we might be restoring from a snapshot (if the
target index already exists then there may be leases on disk) or
force-allocating a stale primary, and in neither case does it make sense to
restore the retention leases from disk.
With this change we write an empty retention leases file during recovery,
except for the following cases:
- During peer recovery the on-disk leases may be accurate and could be needed
if the recovery target is made into a primary.
- During recovery from an existing store, as long as we are not
force-allocating a stale primary.
Relates #37165
Today we test Zen1/Zen2 compatibility by running 7.x nodes with a "fake" Zen1
implementation. However this is not a truly faithful test because these nodes
do known how to properly deserialize a 7.x cluster state, voting configurations
and all, whereas a real Zen1 node is in 6.7 and ignores the coordination
metadata.
We only ever apply a cluster state that's been committed, which in Zen2
involves setting the last-committed configuration to equal the last-accepted
configuration. Zen1 knows nothing about this adjustment, so it is possible for
these to differ. This breaks the assertion that the cluster states are equal on
all nodes after integration tests.
This commit fixes this by implementing this adjustment in Zen1 before applying
a cluster state.
Fixes#40055.
This change ensures that we do not make assumptions about the length
of the input that we can read from the stdin. It still consumes only
one line, as the previous implementation
* Handle UTF8 values in the keystore
Our current implementation uses CharBuffer#array to get the chars
that were decoded from the UTF-8 bytes. The backing array of
CharBuffer is created in CharsetDecoder#decode and gets an initial
length that is the same as the length of the ByteBuffer it decodes,
hence the number of UTF-8 bytes.
This works fine for the first 128 characters where each one needs
one bytes, but for the next UTF-8 characters (other latin alphabets
Greek, Cyrillic etc.) where we need 2 to 4 bytes per character, this
backing char array has a larger size than the number of the actual
chars this CharBuffer contains. Calling `array()` on it will return
a char array that can potentially have extra null chars so the
SecureString we get from the KeystoreWrapper, is not the same as the
one we entered.
This commit changes the behavior to use Arrays#copyOfRange to get
the necessary chars from the CharBuffer and adds a test with
random ( maybe not printable ) UTF-8 strings
Computing the compressed size of the cluster state on every invocation
of cluster:monitor/state action is expensive, and the value of this
field is dubious anyway. Therefore we want to remove computing this
field. As a first step, we stop computing and return this field by
default. To avoid breaking users, we will give them a system property to
use to tide them over until the next major release when we will actually
remove this field. This comes with a deprecation warning too, and the
backport to the appropriate minor will also include a note in the
migration guide. There will be a follow-up to remove this field in the
next major version.
After the joda-java time migration we were formatting zone ids with zoneOrOffsetId method. This when a date was provided with a ZoneRegion for instance America/Edmonton it was appending this zone identifier instead of zone formatted as +HH:MM.
This fix is changing the format of zone suffix for all printers and also always wrapping a Temporal into a ZonedDateTime when formatting.
closes#38471
backport #39568
Currently there is a method `Recycler#obtain(size)` that allows a size
parameter to be passed. However all implementations ignore this
parameter and just allocate a page size based on other settings. This
commit removes this method.
When performing the test with 57 master-eligible nodes and one node
crash, we saw messy elections, when multiple nodes were attempting to
become master.
JoinHelper has logged 105 long log messages with lengthy stack
traces during one such election.
To address this, we decided to log these messages every time only on
debug level.
We will log last unsuccessful join attempt (along with a timestamp)
if any with WARN level if the cluster is failing to form.
(cherry picked from commit 17a148cc27b5ac6c2e04ef5ae344da05a8a90902)
Currently token filter settings are treated as fixed once they are declared and
used in an analyzer. This is done to prevent changes in analyzers that are already
used actively to index documents, since changes to the analysis chain could
corrupt the index. However, it would be safe to allow updates to token
filters at search time ("search_analyzer"). This change introduces a new
property of token filters that allows to mark them as only being usable at search
or at index time. Any analyzer that uses these tokenfilters inherits that property
and can be rejected if they are used in other contexts. This is a first step towards
making specific token filters (e.g. synonym filter) updateable.
Relates to #29051
Today, when applying new cluster state we attempt to connect to all of its
nodes as a blocking part of the application process. This is the right thing to
do with new nodes, and is a no-op on any already-connected nodes, but is
questionable on known nodes from which we are currently disconnected: there is
a risk that we are partitioned from these nodes so that any attempt to connect
to them will hang until it times out. This can dramatically slow down the
application of new cluster states which hinders the recovery of the cluster
during certain kinds of partition.
If nodes are disconnected from the master then it is likely that they are to be
removed as part of a subsequent cluster state update, so there's no need to try
and reconnect to them like this. Moreover there is no need to attempt to
reconnect to disconnected nodes as part of the cluster state application
process, because we periodically try and reconnect to any disconnected nodes,
and handle their disconnectedness reasonably gracefully in the meantime.
This commit alters this behaviour to avoid reconnecting to known nodes during
cluster state application.
Resolves#29025.
If a primary on 6.7 and a replica on 5.6 are running more than 5 minutes
(retention leases background sync interval), the retention leases
background sync will be triggered, and it will trip 6.7 node due to the
illegal checkpoint value. We can fix the problem by making the returned
checkpoint depends on the node version. This PR, however, chooses to
enforce retention leases require soft deletes, and make retention leases
sync noop if soft deletes is disabled instead.
Closes#39914
* The test failure in #39852 is caused by a file in the initial repository when there should not be any
* It seems that on a normal consistent file system no left-over file should exist ever here after the validation finishes and I can't reproduce or see any other path to a dangling file in the fresh respository
=> added a more verbose and strict assertion that will log what file is left over next time
* Relates #39852
This commit removes the "doc" type from monitoring internal indexes.
The template still carries the "_doc" type since that is needed for
the internal representation.
This change impacts the following templates:
monitoring-alerts.json
monitoring-beats.json
monitoring-es.json
monitoring-kibana.json
monitoring-logstash.json
As part of the required changes, the system_api_version has been
bumped from "6" to "7" and support for version "2" has been dropped.
A new empty pipeline is now introduced for the version "7", and
the formerly empty "6" pipeline will now remove the type and re-direct
the request to the "7" index.
Additionally, to due to a difference in the internal representation
(which requires the inclusion of "_doc" type) and external representation
(which requires the exclusion of any type) a helper method is introduced
to help convert internal to external representation, and used by the
monitoring HTTP template exporter.
Relates #38637
Executors of type fixed_auto_queue_size (i.e. search / search_throttled) wrap runnables into
TimedRunnable, which is an AbstractRunnable. This is dangerous as it might silently swallow
exceptions, and possibly miss calling a response listener. While this has not triggered any failures in
the tests I have run so far, it might help uncover future problems.
Follow-up to #36137
This test started failing since decreasing the leader and follower check timeouts (#38298). The
reason is that the test was relying on the default publication timeout to come into effect before
leader / follower check timeouts, which is now not always true anymore.
Closes#38867
Currently we log exceptions due to channel close at the debug level in
the normal exception handler. Currently we log all send failures due to
channel close at the warn level. This commit changes that to only log at
warn if the send failure is not due to channel closed. Additionally, it
adds the ssl engine closed as a channel close exception.
Today we use a ConcurrentHashSet to track the in-flight outgoing joins in the
`JoinHelper`. This is fine for adding and removing elements but not for the
emptiness test in `isJoinPending()` which might return false if one join
finishes just after another one starts, even though joins were pending
throughout.
As used today this is ok: it means the node was trying to join a master but
this join attempt just finished unsuccessfully, and causes it to (rightfully)
reject a `FollowerCheck` from the failed master. However this kind of API
inconsistency is trappy and there is no need to be clever here, so this change
replaces the set with a `synchronizedSet()`.
When ESRejectedExecutionException gets thrown on the coordinating node while trying to fetch hits, the resulting exception will hold no shard failures, hence `503` is used as the response status code. In that case, `429` should be returned instead. Also, the status code should be taken from the cause if available whenever there are no shard failures instead of blindly returning `503` like we currently do.
Closes#38586
The monitoring bulk API accepts the same format as the bulk API, yet its concept
of types is different from "mapping types" and the deprecation warning is only
emitted as a side-effect of this API reusing the parsing logic of bulk requests.
This commit extracts the parsing logic from `_bulk` into its own class with a
new flag that allows to configure whether usage of `_type` should emit a warning
or not. Support for payloads has been removed for simplicity since they were
unused.
@jakelandis has a separate change that removes this notion of type from the
monitoring bulk API that we are considering bringing to 8.0.
This commit propagates some exceptions that were previously swallowed and also
makes sure that exceptions closing streams are either propagated if the try
block succeeded or added as suppressed exceptions otherwise.
* [ML] refactoring lazy query and agg parsing
* Clean up and addressing PR comments
* removing unnecessary try/catch block
* removing bad call to logger
* removing unused import
* fixing bwc test failure due to serialization and config migrator test
* fixing style issues
* Adjusting DafafeedUpdate class serialization
* Adding todo for refactor in v8
* Making query non-optional so it does not write a boolean byte
This commit consolidates more mapping validation logic into the same class.
`FieldTypeLookup` is now a bit simpler, and has the sole responsibility of quickly
resolving field names to their types.
I have a broader refactor planned around mapping merge validation, but this
change should at least be a step in the right direction.
These simplifications to `MapperMergeValidator` are possible now that there is
always a single mapping definition.
* Remove the type argument in `validateMapperStructure`.
* Remove unnecessary checks against existing mappers.
If TransportService is stopped before a shard-failure request is sent
but after the request is registered, TransportService will notify
ReplicationOperation a TransportException with an error message:
"transport stop, action: internal:cluster/shard/failure".
Relates #39584
* Bundle java in distributions
Setting up a jdk is currently a required external step when installing
elasticsearch. This is particularly problematic for the rpm/deb packages
as installing a jdk in the same package installation command does not
guarantee any order, so must be done in separate steps. Additionally,
JAVA_HOME must be set and often causes problems in selecting a correct
jdk when, for example, the system java is an older unsupported version.
This commit bundles platform specific openjdks into each distribution.
In addition to eliminating the issues above, it also presents future
possible improvements like using jlink to build jdk images only
containing modules that elasticsearch uses.
closes#31845
Prior to this commit (and after 6.5.0), if an ingest node changes
the _index in a pipeline, the original target index would be created.
For daily indexes this could create an extra, empty index per day.
This commit changes the TransportBulkAction to execute the ingest node
pipeline before attempting to create the index. This ensures that the
only index created is the original or one set by the ingest node pipeline.
This was the execution order prior to 6.5.0 (#32786).
The execution order was changed in 6.5 to better support default pipelines.
Specifically the execution order was changed to be able to read the settings
from the index meta data. This commit also includes a change in logic such
that if the target index does not exist when ingest node pipeline runs, it
will now pull the default pipeline (if one exists) from the settings of the
best matched of the index template.
Relates #32786
Relates #32758Closes#36545
This commit introduces the forget follower API. This API is needed in cases that
unfollowing a following index fails to remove the shard history retention leases
on the leader index. This can happen explicitly through user action, or
implicitly through an index managed by ILM. When this occurs, history will be
retained longer than necessary. While the retention lease will eventually
expire, it can be expensive to allow history to persist for that long, and also
prevent ILM from performing actions like shrink on the leader index. As such, we
introduce an API to allow for manual removal of the shard history retention
leases in this case.
We need to unwrap and use the actual cause when determining if the node
with primary shard is shutting down because TransportService will throw
a TransportException wrapped in a SendRequestTransportException.
Relates #39584
Today when a replicated write operation fails to execute on a replica,
the primary will reach out to the master to fail that replica (and mark
it stale). We then won't ack that request until the master removes the
failing replica; otherwise, we will lose the acked operation if the
failed replica is still in the in-sync set. However, if a node with the
primary is shutting down, we might ack such request even though we are
unable to send a shard-failure request to the master. This happens
because we ignore NodeClosedException which is triggered when the
ClusterService is being closed.
Closes#39467
This adds the capability to snapshot replicated closed indices.
It also changes snapshot requests in v8.0.0 to automatically expand wildcards to closed indices and hence start snapshotting closed indices by default. For v7.1.0 and above, wildcards are by default only expanded to open indices, which can be changed by explicitly setting the expand_wildcards option either to all or closed.
Note that indices are always restored as open indices, even if they have been snapshotted as closed replicated indices.
Relates to #33888
Lucene added an optimization to leave the term dictionary on disk
for non-id like fields. This change happened very late in the release
processes such that it's better to have an escape hatch if certain
use-cases are hurt by this optimization. This setting might be
removed in the future if it turns out to be unnecessary.
Currently SearchServiceTests.testCloseSearchContextOnRewriteException can fail
if a refresh happens while we test for the SearchPhaseExecutionException that is
thrown later in the test. The test takes the current Store#refCount and expects
it to be the same after the exception is thrown. If a refresh happens in that
interval however, the refCound will be different, causing the test to fail. This
can be provoked e.g. by running this section in a tight loop.
Switching of refresh for this tests solves the issue.
When preparing the state to send to other nodes, we're serializing it
for each node, despite using putIfAbsent.
This commit checks if the state was already serialized for this node
version before performing the potentially expensive computation.
The map is not used by multiple threads, so computeIfAbsent is not
needed (and could not be used here easily, because IOException could
be thrown).
(cherry picked from commit c99be63b43f5250f3cd220130df73c5e9e097459)
When a node is joining the cluster we ensure that it can send requests to the
master _at that time_. If it joins the cluster and _then_ loses the ability to
send requests to the master then it should be removed from the cluster. Today
this is not the case: the master can still receive responses to its follower
checks, and receives acknowledgements to cluster state publications, so has no
reason to remove the node.
This commit changes the handling of follower checks so that they fail if they
come from a master that the other node was following but which it now believes
to have failed.
Today the `GroupedActionListener` accepts a `defaults` parameter but all
callers pass an empty list. Also it is permitted to pass an empty group but
this is trappy because the delegated listener is never be called in that case.
This commit removes the `defaults` parameter and forbids an empty group.
* Optimize Bulk Message Parsing and Message Length Parsing
* findNextMarker took almost 1ms per invocation during the PMC rally track
* Fixed to be about an order of magnitude faster by using Netty's bulk `ByteBuf` search
* It is unnecessary to instantiate an object (the input stream wrapper) and throw it away, just to read the `int` length from the message bytes
* Fixed by adding bulk `int` read to BytesReference
This commit renames the retention lease setting
index.soft_deletes.retention.lease so that it is under the namespace
index.soft_deletes.retention_lease. As such, we rename the setting to
index.soft_deletes.retention_lease.period.
This commit adds a new build type (together with deb/rpm/tar/zip) to
represent the official Docker images. This build type will be displayed
in APIs such as the main and nodes info APIs.
In case multiple completion suggestion entries have the same score and
surface form, the order in which such options will be returned is
currently not deterministic.
With this commmit we introduce tie-breaking for such situations, based
on shard id, index name, index uuid and doc id like we already do for
ordinary search hits. With this change we also make shardIndex
mandatory when sorting and comparing completion suggestion options,
which was previously only needed later when fetching hits).
Also, we need to make sure shardIndex is properly set when merging
completion suggestions coming from multiple clusters in
`SearchResponseMerger`
* Soften redundant cast to allow use of `DeterministicTaskQueue` in this class for #39504
* Remove two redundant variables and lower visibility in two possible spots
* Make field `final`
Currently Fuzziness#asDistance(String) doesn't work for custom AUTO values. If
the fuzziness is AUTO, the method returns the correct edit distance to use,
depending on the input string, but for custom AUTO values it currently always
returns an edit distance of 1. Correcting this and adding unit and integration
tests to catch these cases.
Closes#39614
Today we have no chance to fetch actual segment stats for segments that
are currently unloaded. This is relevant in the case of frozen indices.
This allows to monitor how much memory a frozen index would use if it was
unfrozen.
The match interval builder analyses input text and converts it to an IntervalSource, and as such
may generate token streams with stopwords. This commit deals with these by using the extend
factory to cover the gaps produced by these stopwords so that phrase and ordered queries work
correctly.
`TopDocsCollectorContext` can already shortcut hit counts on `match_all` and `term` queries when there are no deletions.
This change adds this ability for `exists` queries if the index doesn't have deletions and fields are indexed.
Closes#37475
While serializing custom objects, the length of the list is computed after
filtering out the unsupported objects but while writing objects the filter
is not applied thus resulting in writing unsupported objects which will fail
to deserialize by the receiever. Adding the condition to filter out unsupported
custom objects.
Since #39006 we should be able to complete a peer-recovery without
waiting for pending indexing operations. Thus, the assertion in
testDoNotWaitForPendingSeqNo should be updated from false to true.
Closes#39510
This is now possible as Lucene's `TotalHits` implements `equals`/`hashcode`,
all the other methods can be in-lined in `SearchHits` instead, no need for
a specific wrapper class.
* Introduce Safer Chaining of Listeners
* The motivation here is to make reasoning about chains of `ActionListener` a little easier, by providing a safe method for nesting `ActionListener` that guarantees that a response is never dropped. Also, it dries up the code a little by removing the need to repeat `listener::onFailure` and `listener.onResponse` over and over.
* Refactored a number of obvious/easy spots to use the new listener constructor
Zen1IT#testFreshestMasterElectedAfterFullClusterRestart fails sometimes because
we request the cluster state before state recovery has completed, and therefore
obtain the default value for the setting we're relying on.
Confusingly, we were starting out by setting this setting to its default value,
so the test looked like it was failing because of a production bug. This commit
avoids this confusion in future by setting it to a non-default value at the
start of the test.
Fixes#39586.
This commit adds the following:
- more tests to IndicesServiceCloseTests, one of them found a bug in the order
in which `IndicesQueryCache#onClose` and
`IndicesService.indicesRefCount#decRef` are called.
- made `IndicesQueryCache.stats2` a synchronized map. All writes to it are
already protected by the lock of the Lucene cache, but the final read from
an assertion in `IndicesQueryCache#close()` was not so this change should
avoid any potential visibility issues.
- human-readable `toString`s to make debugging easier.
Relates #37117
This cleans up the Engine implementation by separating the sequence number generation from the
planning step in the engine, to avoid for the planning step to have any side effects. This makes it
easier to see that every sequence number is properly accounted for.
Add debug log when index is flushed to investigate a failure
in IndicesRequestCacheIT
"DEBUG" level is used as "TRACE" produces too much output irrelevant for this
issue
Relates to #32827
Backport support for replicating closed indices (#39499)
Before this change, closed indexes were simply not replicated. It was therefore
possible to close an index and then decommission a data node without knowing
that this data node contained shards of the closed index, potentially leading to
data loss. Shards of closed indices were not completely taken into account when
balancing the shards within the cluster, or automatically replicated through shard
copies, and they were not easily movable from node A to node B using APIs like
Cluster Reroute without being fully reopened and closed again.
This commit changes the logic executed when closing an index, so that its shards
are not just removed and forgotten but are instead reinitialized and reallocated on
data nodes using an engine implementation which does not allow searching or
indexing, which has a low memory overhead (compared with searchable/indexable
opened shards) and which allows shards to be recovered from peer or promoted
as primaries when needed.
This new closing logic is built on top of the new Close Index API introduced in
6.7.0 (#37359). Some pre-closing sanity checks are executed on the shards before
closing them, and closing an index on a 8.0 cluster will reinitialize the index shards
and therefore impact the cluster health.
Some APIs have been adapted to make them work with closed indices:
- Cluster Health API
- Cluster Reroute API
- Cluster Allocation Explain API
- Recovery API
- Cat Indices
- Cat Shards
- Cat Health
- Cat Recovery
This commit contains all the following changes (most recent first):
* c6c42a1 Adapt NoOpEngineTests after #39006
* 3f9993d Wait for shards to be active after closing indices (#38854)
* 5e7a428 Adapt the Cluster Health API to closed indices (#39364)
* 3e61939 Adapt CloseFollowerIndexIT for replicated closed indices (#38767)
* 71f5c34 Recover closed indices after a full cluster restart (#39249)
* 4db7fd9 Adapt the Recovery API for closed indices (#38421)
* 4fd1bb2 Adapt more tests suites to closed indices (#39186)
* 0519016 Add replica to primary promotion test for closed indices (#39110)
* b756f6c Test the Cluster Shard Allocation Explain API with closed indices (#38631)
* c484c66 Remove index routing table of closed indices in mixed versions clusters (#38955)
* 00f1828 Mute CloseFollowerIndexIT.testCloseAndReopenFollowerIndex()
* e845b0a Do not schedule Refresh/Translog/GlobalCheckpoint tasks for closed indices (#38329)
* cf9a015 Adapt testIndexCanChangeCustomDataPath for replicated closed indices (#38327)
* b9becdd Adapt testPendingTasks() for replicated closed indices (#38326)
* 02cc730 Allow shards of closed indices to be replicated as regular shards (#38024)
* e53a9be Fix compilation error in IndexShardIT after merge with master
* cae4155 Relax NoOpEngine constraints (#37413)
* 54d110b [RCI] Adapt NoOpEngine to latest FrozenEngine changes
* c63fd69 [RCI] Add NoOpEngine for closed indices (#33903)
Relates to #33888
With #17187, we verified IndexService creation during initial state recovery on the master and if the
recovery failed the index was imported as closed, not allocating any shards. This was mainly done to
prevent endless allocation loops and full log files on data-nodes when the indexmetadata contained
broken settings / analyzers. Zen2 loads the cluster state eagerly, and this check currently runs on all
nodes (not only the elected master), which can significantly slow down startup on data nodes.
Furthermore, with replicated closed indices (#33888) on the horizon, importing the index as closed
will no longer not allocate any shards. Fortunately, the original issue for endless allocation loops is
no longer a problem due to #18467, where we limit the retries of failed allocations. The solution here
is therefore to just undo #17187, as it's no longer necessary, and covered by #18467, which will solve
the issue for Zen2 and replicated closed indices as well.
Mutations of the timeout values were using string-representations.
This resulted in very rare cases where the original timeout value was
represented as something like "0ms" and the new random time-value generated
was "0s". Although their string representations differ, their underlying
TimeValue does not. This resulted in `-Dtests.seed=7F4C034C43C22B1B` to
fail.
This adds a `details` parameter to shard locking in `NodeEnvironment`. This is
intended to be used for diagnosing issues such as
```
1> [2019-02-11T14:34:19,262][INFO ][o.e.c.m.MetaDataDeleteIndexService] [node_s0] [.tasks/oSYOG0-9SHOx_pfAoiSExQ] deleting index
1> [2019-02-11T14:34:19,279][WARN ][o.e.i.IndicesService ] [node_s0] [.tasks/oSYOG0-9SHOx_pfAoiSExQ] failed to delete index
1> org.elasticsearch.env.ShardLockObtainFailedException: [.tasks][0]: obtaining shard lock timed out after 0ms
1> at org.elasticsearch.env.NodeEnvironment$InternalShardLock.acquire(NodeEnvironment.java:736) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.shardLock(NodeEnvironment.java:655) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.lockAllForIndex(NodeEnvironment.java:601) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.deleteIndexDirectorySafe(NodeEnvironment.java:554) ~[main/:?]
```
In the hope that we will be able to determine why the shard is still locked.
Relates to #30290 as well as some other CI failures
Today we block on the ReferenceManager in the case of a scheduled refresh.
Yet if there is a refresh happening concurrently we might block and create
very smallish segments. Instead we should just move on to the next shard
and free up the refresh thread instead.
* Removed obviously unused fields+methods
* Inlined public methods that only had one caller
* Simplified `Optional` chain
* Simplified some obviously redundant conditions
* Use actual master node, not just a master elligible node when trying to cancel publication. This only works on the master and for unlucky seeds we never try the master within the 10s that the busy assert runs.
* Closes#36813
Backport of #39350
Contains the following:
* LUCENE-8635: Move terms dictionary off-heap for non-primary-key fields in `MMapDirectory`
* LUCENE-8292: `TermsEnum` is fully abstract
* LUCENE-8679: Return WITHIN in `EdgeTree#relateTriangle` only when polygon and triangle share one edge
* LUCENE-8676: Nori tokenizer deals correctly with large buffers
* LUCENE-8697: `GraphTokenStreamFiniteStrings` better handles side paths with gaps
* LUCENE-8664: Add `equals` and `hashCode` to `TotalHits`
* LUCENE-8660: `TopDocsCollector` returns accurate hit counts if the total equals the threshold
* LUCENE-8654: `Polygon2D#relateTriangle` fix for when the polygon is inside the triangle
* LUCENE-8645: `Intervals#fixField` can merge intervals from different fields
* LUCENE-8585: Create jump-tables for DocValues at index time
When trying to add a setting to the keystore with an upper case name, we
reject with an unclear error message. This commit makes that error
message much clearer.
* Don't Ping on Handshake Connection
* It does not make sense to run pings on the handshake connection
* Set the ping interval to `-1` to deactivate pings on it
Today the abstract `org.elasticsearch.discovery.PeerFinder` uses the logger of
its implementation, which in production is in `o.e.cluster.coordination`. This
turns out to be confusing and unhelpful, so with this change we move to using
the logger that belongs to `PeerFinder`.
Currently there are two security tests that specifically target the
netty security transport. This PR moves the client authentication tests
into `AbstractSimpleSecurityTransportTestCase` so that the nio transport
will also be tested.
Additionally the work to build transport configurations is moved out of
the netty transport and tested independently.
Since #39006, we should either remove `testWaitForPendingSeqNo`
or adjust it not to wait for the pending operations. This change picks
the latter.
Relates #39006
`withLocalReduction` is confusing as `local` effectively means "local
to the remote clusters" rather than "local the coordinating node" where
the method is executed. I propose we rename the method to
`crossClusterSearch` which better resembles what the static method is
used for.
We have been calling `reduce` against completion suggestions twice, once
in `SearchPhaseController#reducedQueryPhase` where all suggestions get
reduced, and once more in `SearchPhaseController#sortDocs` where we
add the top completion suggestions to the `TopDocs` so their docs can
be fetched. There is no need to do reduction twice. All suggestions can
be reduced in one call, then we can filter the result and pass only the
already reduced completion suggestions over to `sortDocs`. The small
important detail is that `shardIndex`, which is currently used only
to fetch suggestions hits, needs to be set before the first reduction,
hence outside of `sortDocs` where we have been doing it until now.
Checks that the core coordination algorithm implemented as part of Zen2 (#32006) supports
linearizable semantics. This commit adds a linearizability checker based on the Wing and Gong
graph search algorithm with support for compositional checking and activates these checks for all
CoordinatorTests.
Today we do not bubble up exceptions when processing NoOps but always
treat them as document-level failures. This incorrect treatment causes
the assert_no_failure being tripped in peer-recovery if IndexWriter was
closed exceptionally before.
Closes#38898
Today when users upgrade to 7.0, existing indices will automatically
switch to soft-deletes without an opt-out option. With this change,
we only enable soft-deletes by default for new indices.
Relates #36141
Moves the check for tiny polygons earlier in the test. It turned out
that polygons can be so tiny that we cannot even figure out their
orientation.
Relates to #37356
1. Setting length for formatWarning String to avoid AbstractStringBuilder.ensureCapacityInternal calls
2. Adding extra check for parameter array length == 0 to avoid unnecessarily creating StringBuilder in LoggerMessageFormat.format
Helps to narrow the performance gap in throughout for geonames benchmark (#37411) by 3%. For more details: https://github.com/elastic/elasticsearch/issues/37530#issuecomment-462758384
Relates to #37530
Relates to #37411
Relates to #35754
* Set mappings when creating indices in SuggestSearchIT
These tests don't test dynamic mapping, so they can use preset mappings. This
removes the possibility they may fail due to the mapping not being available
since mapping updates are asynchronous.
Resolves#39315
* Wrap creates in assertAcked
With this change, we won't wait for the local checkpoint to advance to
the max_seq_no before starting phase2 of peer-recovery. We also remove
the sequence number range check in peer-recovery. We can safely do these
thanks to Yannick's finding.
The replication group to be used is currently sampled after indexing
into the primary (see `ReplicationOperation` class). This means that
when initiating tracking of a new replica, we have to consider the
following two cases:
- There are operations for which the replication group has not been
sampled yet. As we initiated the new replica as tracking, we know that
those operations will be replicated to the new replica and follow the
typical replication group semantics (e.g. marked as stale when
unavailable).
- There are operations for which the replication group has already been
sampled. These operations will not be sent to the new replica. However,
we know that those operations are already indexed into Lucene and the
translog on the primary, as the sampling is happening after that. This
means that by taking a snapshot of Lucene or the translog, we will be
getting those ops as well. What we cannot guarantee anymore is that all
ops up to `endingSeqNo` are available in the snapshot (i.e. also see
comment in `RecoverySourceHandler` saying `We need to wait for all
operations up to the current max to complete, otherwise we can not
guarantee that all operations in the required range will be available
for replaying from the translog of the source.`). This is not needed,
though, as we can no longer guarantee that max seq no == local
checkpoint.
Relates #39000Closes#38949
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Today this test catches an exception and asserts that its proximate cause has
message `Random IOException` but occasionally this exception is wrapped two
layers deep, causing the test to fail. This commit adjusts the test to look at
the root cause of the exception instead.
1> [2019-02-25T12:31:50,837][INFO ][o.e.s.SharedClusterSnapshotRestoreIT] [testSnapshotFileFailureDuringSnapshot] --> caught a top level exception, asserting what's expected
1> org.elasticsearch.snapshots.SnapshotException: [test-repo:test-snap/e-hn_pLGRmOo97ENEXdQMQ] Snapshot could not be read
1> at org.elasticsearch.snapshots.SnapshotsService.snapshots(SnapshotsService.java:212) ~[main/:?]
1> at org.elasticsearch.action.admin.cluster.snapshots.get.TransportGetSnapshotsAction.masterOperation(TransportGetSnapshotsAction.java:135) ~[main/:?]
1> at org.elasticsearch.action.admin.cluster.snapshots.get.TransportGetSnapshotsAction.masterOperation(TransportGetSnapshotsAction.java:54) ~[main/:?]
1> at org.elasticsearch.action.support.master.TransportMasterNodeAction.masterOperation(TransportMasterNodeAction.java:127) ~[main/:?]
1> at org.elasticsearch.action.support.master.TransportMasterNodeAction$AsyncSingleAction$2.doRun(TransportMasterNodeAction.java:208) ~[main/:?]
1> at org.elasticsearch.common.util.concurrent.ThreadContext$ContextPreservingAbstractRunnable.doRun(ThreadContext.java:751) ~[main/:?]
1> at org.elasticsearch.common.util.concurrent.AbstractRunnable.run(AbstractRunnable.java:37) ~[main/:?]
1> at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) ~[?:1.8.0_202]
1> at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) ~[?:1.8.0_202]
1> at java.lang.Thread.run(Thread.java:748) [?:1.8.0_202]
1> Caused by: org.elasticsearch.snapshots.SnapshotException: [test-repo:test-snap/e-hn_pLGRmOo97ENEXdQMQ] failed to get snapshots
1> at org.elasticsearch.repositories.blobstore.BlobStoreRepository.getSnapshotInfo(BlobStoreRepository.java:564) ~[main/:?]
1> at org.elasticsearch.snapshots.SnapshotsService.snapshots(SnapshotsService.java:206) ~[main/:?]
1> ... 9 more
1> Caused by: java.io.IOException: Random IOException
1> at org.elasticsearch.snapshots.mockstore.MockRepository$MockBlobStore$MockBlobContainer.maybeIOExceptionOrBlock(MockRepository.java:275) ~[test/:?]
1> at org.elasticsearch.snapshots.mockstore.MockRepository$MockBlobStore$MockBlobContainer.readBlob(MockRepository.java:317) ~[test/:?]
1> at org.elasticsearch.repositories.blobstore.ChecksumBlobStoreFormat.readBlob(ChecksumBlobStoreFormat.java:101) ~[main/:?]
1> at org.elasticsearch.repositories.blobstore.BlobStoreFormat.read(BlobStoreFormat.java:90) ~[main/:?]
1> at org.elasticsearch.repositories.blobstore.BlobStoreRepository.getSnapshotInfo(BlobStoreRepository.java:560) ~[main/:?]
1> at org.elasticsearch.snapshots.SnapshotsService.snapshots(SnapshotsService.java:206) ~[main/:?]
1> ... 9 more
FAILURE 0.59s J0 | SharedClusterSnapshotRestoreIT.testSnapshotFileFailureDuringSnapshot <<< FAILURES!
> Throwable #1: java.lang.AssertionError:
> Expected: a string containing "Random IOException"
> but: was "[test-repo:test-snap/e-hn_pLGRmOo97ENEXdQMQ] failed to get snapshots"
> at __randomizedtesting.SeedInfo.seed([B73CA847D4B4F52D:884E042D2D899330]:0)
> at org.hamcrest.MatcherAssert.assertThat(MatcherAssert.java:20)
> at org.elasticsearch.snapshots.SharedClusterSnapshotRestoreIT.testSnapshotFileFailureDuringSnapshot(SharedClusterSnapshotRestoreIT.java:821)
> at java.lang.Thread.run(Thread.java:748)
In integration tests where `setBootstrapMasterNodeIndex()` is used in
combination with `autoMinMasterNodes = false` the cluster can start
bootstrapping once the number of nodes set with the
`setBootstrapMasterNodeIndex` have been started but it's not ensured
that all nodes have successfully joined to form the cluster.
This behaviour was introduced with 5db7ed22a0
and in order to ensure that the cluster is properly formed before proceeding
with the integration test, use `ensureStableCluster()` with the
appropriate number of expected nodes.
Fixes: #39220
In #39224 we made shard history retention lease syncing ignore the
`index.write.wait_for_active_shards` setting on the index, and added a test
that showed that it was ignored. However the test as merged actually creates a
green index, so the `wait_for_active_shards` setting has no effect. This change
adjusts the test to create a yellow index to verify that
`wait_for_active_shards` really is ignored.
This fixes an issue where a messy master election might prevent shard allocation to properly
proceed. I've encountered this in failing CI tests when we were bootstrapping multiple nodes. Tests
would sometimes time out on an `ensureGreen` after an unclean master election. The reason for
this is how the async shard information fetching works and how the clean-up logic in
GatewayAllocator is integrated with the rest of the system. When a node becomes master, it will, as
part of the first cluster state update where it becomes master, already try allocating shards (see
`JoinTaskExecutor`, in particular the call to `reroute`). This process, which runs on the
MasterService thread, will trigger async shard fetching. If the node is still processing an earlier
election failure in ClusterApplierService (e.g. due to a messy election), that will possibly trigger the
clean-up logic in GatewayAllocator after the shard fetching has been initiated by MasterService,
thereby cancelling the fetching, which means that no subsequent reroute (allocation) is triggered
after the shard fetching results return. This means that no shard allocation will happen unless the
user triggers an explicit reroute command. The bug imo is that GatewayAllocator is called from both
MasterService and ClusterApplierService threads, with no clear happens-before relation. The fix
here makes it so that the clean-up logic is also run on the MasterService thread instead of the
ClusterApplierService thread, reestablishing a clear happens-before relation. Note that testing this
is tricky. With the newly added test, I can quite often reproduce this by adding `Thread.sleep(10);`
in ClusterApplierService (to make sure it does not go too quickly) and adding `Thread.sleep(50);` in
`TransportNodesListGatewayStartedShards` to make sure that shard state fetching does not go too
quickly either.
Note that older versions of Zen discovery are affected by this as well, but did not exhibit this issue
as often because master elections are much slower there.
Adjust the retention lease sync actions so that they do not respect the
`index.write.wait_for_active_shards` setting on an index, allowing them to sync
retention leases even if insufficiently many shards are currently active to
accept writes.
Relates #39089
We tripped this assertion three times for the last two weeks. However,
it only says "this IndexWriter is closed" without the actual cause.
```
[2019-02-14T11:46:31,144][ERROR][o.e.b.ElasticsearchUncaughtExceptionHandler] [node-1] fatal error in thread [elasticsearch[node-1][generic][T#2]], exiting
java.lang.AssertionError: unexpected failure while replicating translog entry: org.apache.lucene.store.AlreadyClosedException: this IndexWriter is closed
```
This change replaces an assert with an AssertionError so that we will
have the actual cause in the next build failures.
Relates #38898
We validate HW parameters (namely, window > 2 * period) when parsing
the XContent... but that means transport clients can configure bad
params.
This change allows model to validate the window and throw an
exception if they wish.
It also makes some test changes:
- removes testBadModelParams(), which was a junk test (didn't do
anything), and bad param checking is done elsewhere in units tests
- Fixes one of the windows in testHoltWintersNotEnoughData()
- Ensures the period in testHoltWintersNotEnoughData() is >> window
- Removes `setTypes()` since that's deprecated
With this commit we remove all usages of the deprecated method
`ExceptionsHelper#detailedMessage` in tests. We do not address
production code here but rather in dedicated follow-up PRs to keep the
individual changes manageable.
Relates #19069
Currently remote compression and ping schedule settings are dynamic.
However, we do not listen for changes. This commit adds listeners for
changes to those two settings. Additionally, when those settings change
we now close existing connections and open new ones with the settings
applied.
Fixes#37201.
`ReadOnlyEngine` never recovers operations from translog and never
updates translog information in the index shard's recovery state, even
though the recovery state goes through the `TRANSLOG` stage during
the recovery. It means that recovery information for frozen shards indicates
an unkown number of recovered translog ops in the Recovery APIs
(translog_ops: `-1` and translog_ops_percent: `-1.0%`) and this is confusing.
This commit changes the `recoverFromTranslog()` method in `ReadOnlyEngine`
so that it always recover from an empty translog snapshot, allowing the recovery
state translog information to be correctly updated.
Related to #33888
`InternalEngine.resolveDocVersion()` uses `relativeTimeInMillis()` from
`ThreadPool` so it needs, the cached time to be advanced. Add a check
to ensure that and decrease the `thread_pool.estimated_time_interval`
to 1msec to prevent long running times for the test.
Fixes: #38874
Co-authored-by: Boaz Leskes <b.leskes@gmail.com>
This commit introduces the retention leases to ESIndexLevelReplicationTestCase,
then adds some tests verifying that the retention leases replication works
correctly in spite of the presence of the primary failover or out of order
delivery of retention leases sync requests.
Relates #37165
Replicates the majority of existing Derivative pipeline integration tests into
an AggregatorTestCase, with the goal of removing the integration
tests in the near future.
Fixes an error in median calculation in
MedianAbsoluteDeviationAggregatorTests for odd number of sample points,
which causes some rare test failures.
Fixes#38937
Today's calculation of the maximum number of shards per attribute is rather
convoluted. This commit clarifies that it returns
ceil(shardCount/numberOfAttributes).
Blob store compression was not enabled for some of the files in
snapshots due to constructor accessing sub-class fields. Fixed to
instead accept compress field as constructor param. Also fixed chunk
size validation to work.
Deprecated repositories.fs.compress setting as well to be able to unify
in a future commit.
Sometimes we turn objects into strings for logging or debugging using
`toString()`, but the default implementation is often unhelpful. This change
improves on this in two places I ran into recently.
This test had a bug. We attempt to allow only the primary to be
allocated, to force all replicas to recovery from the primary after we
had set the state of the retention leases on the primary. However, in
building the index settings, we were overwriting the settings that
exclude the replicas from being allocated. This means that some of the
replicas would end up assigned and rather than receive retention leases
during recovery, they would be part of the replication group receiving
retention leases as they are manipulated. Since retention lease renewals
are only synced periodically, this means that the replica could be
lagging a little behind in some cases leading to an assertion tripping
in the test. This commit addresses this by ensuring that the replicas
are indeed not allocated until after the retention leases are done being
manipulated on the replica. We did this by not overwriting the exclude
settings.
Closes#39105
The parseMillis method was able to work on formats without timezones by
falling back to UTC. The Date Formatter interface did not support this, as
the calling code was using the `Instant.from` java time API.
This switches over to an internal method which adds UTC as a timezone.
Closes#39067
When retention leases fail to sync after an expiration check, we emit a
log message about this. This commit adds the retention leases that
failed to sync.
When the background retention lease sync fires, we check an see if any
retention leases are expired. If any did expire, we execute a full
retention lease sync (write action). Since this is happening on a
background thread, we do not block that thread waiting for success (it
will simply try again when the timer elapses). However, we were
swallowing exceptions that indicate failure. This commit addresses that
by logging the failures. Additionally, we add some trace logging to the
execution of syncing retention leases.
Fixed two potential causes for leaked threads during tests:
1. When adding a channel to serverChannels, we add it under a monitor
that we do not use when reading from it. This is potentially unsafe if
there is no other happens-before relationship ensuring the safety of
this.
2. Long-shot but if the thread pool was shutdown before entering this
code, we would silently forget about closing server channels so added
assert.
Strengthened the locking to ensure that once we stop the transport, no
new server channels can be made.
Relates to CI failure issue: #37543
Many of our index components use ref-counting so that in the event that a shard
is closed while there are still ongoing requests, then the index reader and the
store only effectively get closed when ongoing requests have finished. However
we don't apply the same principle to the request and query caches, which might
get closed while there are still in-flight requests.
This commit adds ref-counting to `IndicesService` so that the caches and other
components it maintains only get closed when all shards are effectively closed.
Closes#37117
* During fetching remote mapping if remote client is missing then
`NoSuchRemoteClusterException` was not handled.
* When adding remote connection, check that it is really connected
before continue-ing to run the tests.
Relates to #38695
This commit is the first step in integrating shard history retention
leases with CCR. In this commit we integrate shard history retention
leases with recovery from remote. Before we start transferring files, we
take out a retention lease on the primary. Then during the file copy
phase, we repeatedly renew the retention lease. Finally, when recovery
from remote is complete, we disable the background renewing of the
retention lease.
This commit adds a `ListenerTimeouts` class that will wrap a
`ActionListener` in a listener with a timeout scheduled on the generic
thread pool. If the timeout expires before the listener is completed,
`onFailure` will be called with an `ElasticsearchTimeoutException`.
Timeouts for the get ccr file chunk action are implemented using this
functionality. Additionally, this commit attempts to fix#38027 by also
blocking proxied get ccr file chunk actions. This test being un-muted is
useful to verify the timeout functionality.
`SearchShardIterator` inherits its `compareTo` implementation from `PlainShardIterator`. That is good in most of the cases, as such comparisons are based on the shard id which is unique, even when searching against indices with same names across multiple clusters (thanks to the index uuid being different). In case though the same cluster is registered multiple times with different aliases, the shard id is exactly the same, hence remote results will be returned before local ones with same shard id objects. That is because remote iterators are added before local ones, and we use a stable sorting method in `GroupShardIterators` constructor.
This PR enhances `compareTo` for `SearchShardIterator` to tie break on cluster alias and introduces consistent `equals` and `hashcode` methods. This allows to remove a TODO in `SearchResponseMerger` which otherwise has to handle this special case specifically. Also, while at it I added missing tests around equals/hashcode and compareTo and expanded existing ones.
Today when processing an operation on a replica engine (or the
following engine), we first add it to Lucene, then add it to translog,
then finally marks its seq_no as completed. If a flush occurs after step1,
but before step-3, the max_seq_no in the commit's user_data will be
smaller than the seq_no of some documents in the Lucene commit.
We verify seq_no_stats is aligned between copies at the end of some
disruption tests. Sometimes, the assertion `assertSeqNos` is tripped due
to a lagged global checkpoint on replicas. The global checkpoint on
replicas is lagged because we sync the global checkpoint 30 seconds (by
default) after the last replication operation. This change reduces the
global checkpoint sync-internal to 1s in the disruption tests.
Closes#38318Closes#36789
The predicate shouldPeriodicallyFlush is determined by the uncommitted
translog size and the local checkpoint. The uncommitted translog size
depends on the local checkpoint. The condition shouldPeriodicallyFlush
can be true twice in in the test in the following scenario:
1. Index doc-0 and advances the local checkpoint to 0, the condition
shouldPeriodicallyFlush remains false.
2. Index doc-1 and add it to translog, but the local checkpoint is not
advanced yet (still 0). The condition shouldPeriodicallyFlush becomes
true because the uncommitted translog size is 216bytes (2ops + gen-1 +
gen-2) > 180bytes and the translog generation of the new index commit
would advance from 1 to 2.
> [2019-02-13T23:33:58,257][TRACE][o.e.i.e.Engine ] [node_s_0]
> [test][0] committing writer with commit data [{local_checkpoint=0,
> max_unsafe_auto_id_timestamp=-1, translog_uuid=fFp1Yqd4QiqKDD4ZrC8F-g,
> min_retained_seq_no=0, history_uuid=cn31yrwVQk-Vs7qcg4bi_Q,
> retention_leases=primary_term:1;version:0;, translog_generation=2,
> max_seq_no=1}]
1. The shouldPeriodicallyFlush becomes true again after the local
checkpoint is advanced to 1 because the uncommitted translog size is
216bytes (2ops + gen-2 + gen-3) > 180bytes and the translog generation
of the new index commit would advance from 2 to 4.
> [2019-02-13T23:33:58,264][TRACE][o.e.i.e.Engine ] [node_s_0]
> [test][0] committing writer with commit data [{local_checkpoint=1,
> max_unsafe_auto_id_timestamp=-1, translog_uuid=fFp1Yqd4QiqKDD4ZrC8F-g,
> min_retained_seq_no=0, history_uuid=cn31yrwVQk-Vs7qcg4bi_Q,
> retention_leases=primary_term:1;version:0;, translog_generation=4,
> max_seq_no=1}]
We need to relax the assertion in this test to cover this situation.
Closes#31629
* Fix Issue with Concurrent Snapshot Init + Delete by ensuring that we're not finalizing a snapshot in the repository while it is initializing on another thread
* Closes#38489
DfsPhase captures terms used for scoring a query in order to build global term statistics across
multiple shards for more accurate scoring. It currently does this by building the query's `Weight`
and calling `extractTerms` on it to collect terms, and then calling `IndexSearcher.termStatistics()`
for each collected term. This duplicates work, however, as the various `Weight` implementations
will already have collected these statistics at construction time.
This commit replaces this round-about way of collecting stats, instead using a delegating
IndexSearcher that collects the term contexts and statistics when `IndexSearcher.termStatistics()`
is called from the Weight.
It also fixes a bug when using rescorers, where a `QueryRescorer` would calculate distributed term
statistics, but ignore field statistics. `Rescorer.extractTerms` has been removed, and replaced with
a new method on `RescoreContext` that returns any queries used by the rescore implementation.
The delegating IndexSearcher then collects term contexts and statistics in the same way described
above for each Query.
With this commit we add the `.cfs` file extension to the list of file
types that are memory-mapped by hybridfs. `.cfs` files combine all files
of a Lucene segment into a single file in order to save file handles. As
this strategy is only used for "small" segments (less than 10% of the
shard size), it is benefical to memory-map them instead of accessing
them via NIO.
Relates #36668
Today if soft deletes are enabled then we read the operations needed for peer
recovery from Lucene. However we do not currently make any attempt to retain
history in Lucene specifically for peer recoveries so we may discard it and
fall back to a more expensive file-based recovery. Yet we still retain
sufficient history in the translog to perform an operations-based peer
recovery.
In the long run we would like to fix this by retaining more history in Lucene,
possibly using shard history retention leases (#37165). For now, however, this
commit reverts to performing peer recoveries using the history retained in the
translog regardless of whether soft deletes are enabled or not.
Previously, if a version conflict occurred and a previous primary
response was present, the original primary response would be used both
for sending to replica and back to client. This was made in the past as an
attempt to fix issues with conflicts after relocations where a bulk request
would experience a closed shard half way through and thus have to retry
on the new primary. It could then fail on its own update.
With sequence numbers, this leads to an issue, since if a primary is
demoted (network partitions), it will send along the original response
in the request. In case of a conflict on the new primary, the old
response is sent to the replica. That data could be stale, leading to
inconsistency between primary and replica.
Relocations now do an explicit hand-off from old to new primary and
ensures that no operations are active while doing this. Above is thus no
longer necessary. This change removes the special handling of conflicts
and ignores primary responses when executing shard bulk requests on the
primary.
Prior to this commit, when an indexing operation resulted in an
`Engine.Result.Type.MAPPING_UPDATE_REQUIRED`, TransportShardBulkAction
immediately retries the indexing operation to see if it succeeds. In the event
that it succeeds the context does not wait until the mapping update has
propagated through the cluster state before finishing the indexing.
In some of our tests we rely on mappings being available as soon as they've been
introduced in a document that indexed correctly. By removing the immediate retry
we always wait for this to be the case.
Resolves#38428
Supercedes #38579
Relates to #38711
One of the test methods wasn't run because it was private. Making this method
public and fixing some issues around mocking the threadpool that otherwise would
lead to an NPE.
This changes the output of the `_cat/indices` API with `Security` enabled.
It is possible to only display the index name (and possibly the index
health, depending on the request options) but not its stats (doc count, merges,
size, etc). This is the case for closed indices which have index metadata in the
cluster state but no associated shards, hence no shard stats.
However, when `Security` is enabled, and the request contains wildcards,
**open** indices without stats are a common occurrence. This is because the
index names in the response table are picked up directly from the cluster state
which is not filtered by `Security`'s _indexNameExpressionResolver_, unlike the
stats data which is populated by the indices stats API which does go through the
index name resolver.
This is a bug, because it is circumventing `Security`'s function to hide
unauthorized indices.
This has been fixed by displaying the index names as they are resolved by the indices
stats API. The outputs of these two APIs is now very similar: same index names,
similar data but different format.
Closes#37190
#37767 changed the expected exception for "no such cluster" error from
`IllegalStateException` to a dedicated `NoSuchRemoteClusterException`.
An assertion in `testCollectNodes` needs to be updated accordingly.
When a primary shard is recovered from its store, we trim the last
commit (when it's unsafe). If that primary crashes before the recovery
completes, we will lose the committed retention leases because they are
baked in the last commit. With this change, we copy the retention leases
from the last commit to the safe commit when trimming unsafe commits.
Relates #37165
In this case, we were incrementing the policy too much. This means on
every iteration we actually keep increasing the minimum retained
sequence number, even with leases in place. It was a bug from when the
soft deletes policy had retention leases incorporated into it. This
commit fixes this bug by ensuring we only increment in the proper
places, and adds careful tests for the various situations.
Forward port of https://github.com/elastic/elasticsearch/pull/38757
This change reverts the initial 7.0 commits and replaces them
with the 6.7 variant that still allows for the ecs flag.
This commit differs from the 6.7 variants in that ecs flag will
now default to true.
6.7: `ecs` : default `false`
7.x: `ecs` : default `true`
8.0: no option, but behaves as `true`
* Revert "Ingest node - user agent, move device to an object (#38115)"
This reverts commit 5b008a34aa.
* Revert "Add ECS schema for user-agent ingest processor (#37727) (#37984)"
This reverts commit cac6b8e06f.
* cherry-pick 5dfe1935345da3799931fd4a3ebe0b6aa9c17f57
Add ECS schema for user-agent ingest processor (#37727)
* cherry-pick ec8ddc890a34853ee8db6af66f608b0ad0cd1099
Ingest node - user agent, move device to an object (#38115) (#38121)
* cherry-pick f63cbdb9b426ba24ee4d987ca767ca05a22f2fbb (with manual merge fixes)
Dep. check for ECS changes to User Agent processor (#38362)
* make true the default for the ecs option, and update 7.0 references and tests
The hardcoded '\n' in string will not work in Windows where there is a
different line separator. A System.lineSeparator should be used to make
it work on all platforms
closes#38705
backport #38771
- Disables the request cache on the test, to prevent cached
values from potentially interfering with test results
- Changes the test to execute a single query, in hopes of making
failures more reproducible
Backport of #38583
There were two documents (seq=2 and seq=103) missing on the follower in
one of the failures of `testFailOverOnFollower`. I spent several hours
on that failure but could not figure out the reason. I adjust log and
unmute this test so we can collect more information.
Relates #38633
We need to use the current primary term instead of 1L for the initial
retention leases; otherwise, the primary term of the committed
retention leases won't match the current primary term if the
retention leases never gets updated.
This commit introduces actions for some common retention lease
operations that clients need to be able to perform remotely. These
actions include add/renew/remove.
fix tests to use clock in milliseconds precision in watcher code
make sure the date comparison in string format is using same formatters
some of the code was modified in #38514 possibly because of merge conflicts
closes#38581
Backport #38738
A recent test failure triggered an edge case scenario where failures may be coming back with the same shard id, yet from different clusters.
This commit adapts the failures comparator to take the cluster alias into account when merging failures as part of CCS requests execution.
Also the corresponding test has been split in two: with and without
search shard target set to the failure.
Closes#38672
When a retention lease already exists on an add retention lease
invocation, or a retention lease is not found on a renew retention lease
invocation today we throw an illegal argument exception. This puts a
burden on the caller to catch that specific exception and parse the
message. This commit relieves the burden from the caller by adding
dedicated exception types for these situations.
This commit introduces the ability to remove retention leases. Explicit
removal will be needed to manage retention leases used to increase the
likelihood of operation-based recoveries syncing, and for consumers such
as ILM.
geo_shape indexes created before 6.6 use geohash string encoding as default tree parameter and quadtree encoding for 6.6 and later. This commit fixes bwc to use geohash encoding in LegacyGeoshapeFieldMapper for indexes created before 6.6.
The assertion that the stats2 map is empty in
IndicesQueryCache.close has been observed to
fail very occasionally in internal cluster tests.
The likely cause is a cross-thread visibility
problem for a count variable. This change
makes that count volatile.
Relates #37117
Backport of #38714
The Close Index API has been refactored in 6.7.0 and it now performs
pre-closing sanity checks on shards before an index is closed: the maximum
sequence number must be equals to the global checkpoint. While this is a
strong requirement for regular shards, we identified the need to relax this
check in the case of CCR following shards.
The following shards are not in charge of managing the max sequence
number or global checkpoint, which are pulled from a leader shard. They
also fetch and process batches of operations from the leader in an unordered
way, potentially leaving gaps in the history of ops. If the following shard lags
a lot it's possible that the global checkpoint and max seq number never get
in sync, preventing the following shard to be closed and a new PUT Follow
action to be issued on this shard (which is our recommended way to
resume/restart a CCR following).
This commit allows each Engine implementation to define the specific
verification it must perform before closing the index. In order to allow
following/frozen/closed shards to be closed whatever the max seq number
or global checkpoint are, the FollowingEngine and ReadOnlyEngine do
not perform any check before the index is closed.
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Added a constructor accepting `StreamInput` as argument, which allowed to
make most of the instance members final as well as remove the default
constructor.
Removed a test only constructor in favour of invoking the existing
constructor that takes a `SearchRequest` as first argument.
Also removed profile members and related methods as they were all unused.
The existing formatter being used was not on par with the joda formatter
as it was missing the ability to parse a comma as a separator between
seconds and milliseconds.
While a real iso8601 would be much more complex, this might be
sufficient for some more use-cases.
The ingest date formatter now also uses the iso8601 formatter by
default.
Closes#38345
The benchmarks showed a sharp decrease in aggregation performance for
the UTC case.
This commit uses the same calculation as joda time, which requires no
conversion into any java time object, also, the check for an fixedoffset
has been put into the ctor to reduce the need for runtime calculations.
The same goes for the amount of the used unit in milliseconds.
Closes#37826
Whenever phase failure is raised in AbstractSearchAsyncAction, we go and
release search contexts of shards that successfully returned their
results, prior to notifying the listener of the failure. In case we are
executing a CCS request, it's important to look-up the connection to
send the release context request to.
This commit makes sure that the lookup takes the cluster alias into
account. We used to use `null` at all times instead which is not correct
and was not caught as any exception is caught without re-throwing it.
The test was relying on toString in ZonedDateTime which is different to
what is formatted by strict_date_time when milliseconds are 0
The method is just delegating to dateFormatter, so that scenario should
be covered there.
closes#38359
Backport #38610
Adds the ability to fetch chunks from different files in parallel, configurable using the new `ccr.indices.recovery.max_concurrent_file_chunks` setting, which defaults to 5 in this PR.
The implementation uses the parallel file writer functionality that is also used by peer recoveries.
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
This commit changes the `TransportVerifyShardBeforeCloseAction` so that it
always forces the flush of the shard. It seems that #37961 is not sufficient to
ensure that the translog and the Lucene commit share the exact same max
seq no and global checkpoint information in case of one or more noop
operations have been made.
The `BulkWithUpdatesIT.testThatMissingIndexDoesNotAbortFullBulkRequest`
and `FrozenIndexTests.testFreezeEmptyIndexWithTranslogOps` test this trivial
situation and they both fail 1 on 10 executions.
Relates to #33888
In #38333 and #38350 we moved away from the `discovery.zen` settings namespace
since these settings have an effect even though Zen Discovery itself is being
phased out. This change aligns the documentation and the names of related
classes and methods with the newly-introduced naming conventions.
This commit integrates retention leases with recovery. With this change,
we copy the current retention leases on primary to the replica during
phase two of recovery. At this point, the replica will have been added
to the replication group and so is already receiving retention lease
sync requests from the primary. This means that if any retention lease
syncs are triggered on the primary after we sample the retention leases
here during phase two, that sync request will also arrive on the replica
ensuring that the replica is from this point on up to date with the
retention leases on the primary. We have to copy these during phase two
since we will be applying indexing operations, potentially triggering
merges, and therefore must ensure the correct retention leases are in
place beforehand.
Instead of logging warnings we now rethrow exceptions thrown inside
scheduled/submitted tasks. This will still log them as warnings in
production but has the added benefit that if they are thrown during
unit/integration test runs, the test will be flagged as an error.
This is a continuation of #38014
Fixed NPE that caused CCR tests (IndexFollowingIT and likely others)
to fail.
schedule could bubble rejected exception to uncaught exception
handler when not using SAME executor if thread pool is terminated.
Now ignore rejected exception silently if executor is shutdown.
Elasticsearch has long [supported](https://www.elastic.co/guide/en/elasticsearch/reference/current/docs-index_.html#index-versioning) compare and set (a.k.a optimistic concurrency control) operations using internal document versioning. Sadly that approach is flawed and can sometime do the wrong thing. Here's the relevant excerpt from the resiliency status page:
> When a primary has been partitioned away from the cluster there is a short period of time until it detects this. During that time it will continue indexing writes locally, thereby updating document versions. When it tries to replicate the operation, however, it will discover that it is partitioned away. It won’t acknowledge the write and will wait until the partition is resolved to negotiate with the master on how to proceed. The master will decide to either fail any replicas which failed to index the operations on the primary or tell the primary that it has to step down because a new primary has been chosen in the meantime. Since the old primary has already written documents, clients may already have read from the old primary before it shuts itself down. The version numbers of these reads may not be unique if the new primary has already accepted writes for the same document
We recently [introduced](https://www.elastic.co/guide/en/elasticsearch/reference/6.x/optimistic-concurrency-control.html) a new sequence number based approach that doesn't suffer from this dirty reads problem.
This commit removes support for internal versioning as a concurrency control mechanism in favor of the sequence number approach.
Relates to #1078
This commit lifts the control of when retention leases are expired to
index shard. In this case, we move expiration to an explicit action
rather than a side-effect of calling
ReplicationTracker#getRetentionLeases. This explicit action is invoked
on a timer. If any retention leases expire, then we hard sync the
retention leases to the replicas. Otherwise, we proceed with a
background sync.
Currently the snapshot/restore process manually sets the global
checkpoint to the max sequence number from the restored segements. This
does not work for Ccr as this will lead to documents that would be
recovered in the normal followering operation from being recovered.
This commit fixes this issue by setting the initial global checkpoint to
the existing local checkpoint.
Previously, date formats of `YYYY.MM.dd` would hit an issue
where the year would jump towards the end of the calendar year.
This was an issue that had since been resolved in tests by using
`yyyy` to be the more accurate representation of the year.
Closes#37037.
`CreateIndexRequest#source(Map<String, Object>, ... )`, which is used when
deserializing index creation requests, accidentally accepts mappings that are
nested twice under the type key (as described in the bug report #38266).
This in turn causes us to be too lenient in parsing typeless mappings. In
particular, we accept the following index creation request, even though it
should not contain the type key `_doc`:
```
PUT index?include_type_name=false
{
"mappings": {
"_doc": {
"properties": { ... }
}
}
}
```
There is a similar issue for both 'put templates' and 'put mappings' requests
as well.
This PR makes the minimal changes to detect and reject these typed mappings in
requests. It does not address #38266 generally, or attempt a larger refactor
around types in these server-side requests, as I think this should be done at a
later time.
With this change we no longer support pluggable discovery implementations. No
known implementations of `DiscoveryPlugin` actually override this method, so in
practice this should have no effect on the wider world. However, we were using
this rather extensively in tests to provide the `test-zen` discovery type. We
no longer need a separate discovery type for tests as we no longer need to
customise its behaviour.
Relates #38410
Today we throw a fatal `RuntimeException` if an exception occurs in
`getMasterName()`, and this includes the case where there is currently no
master. However, sometimes we call this method inside an `assertBusy()` in
order to allow for a cluster that is in the process of stabilising and electing
a master. The trouble is that `assertBusy()` only retries on an
`AssertionError` and not on a general `RuntimeException`, so the lack of a
master is immediately fatal.
This commit fixes the issue by asserting there is a master, triggering a retry
if there is not.
Fixes#38331
* The problem in #38226 is that in some corner cases multiple calls to `endSnapshot` were made concurrently, leading to non-deterministic behavior (`beginSnapshot` was triggering a repository finalization while one that was triggered by a `deleteSnapshot` was already in progress)
* Fixed by:
* Making all `endSnapshot` calls originate from the cluster state being in a "completed" state (apart from on short-circuit on initializing an empty snapshot). This forced putting the failure string into `SnapshotsInProgress.Entry`.
* Adding deduplication logic to `endSnapshot`
* Also:
* Streamlined the init behavior to work the same way (keep state on the `SnapshotsService` to decide which snapshot entries are stale)
* closes#38226
We already support unknown objects in the list of pipelines, this changes the
`PipelineConfiguration` to support fields other than just `id` and `config`.
Relates to #36938
Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
Colin Goodheart-Smithe
Nhat Nguyen
Adrien Grand
Ryan Ernst
Mayya Sharipova
Yannick Welsch
Christoph Büscher
David Turner
Jason Tedor
Simon Willnauer
Alexander Reelsen
Andrey Ershov
Jim Ferenczi
Henning Andersen
Luca Cavanna
Oghenovo Usiwoma
Martijn van Groningen
jimczi
Andy Bristol
Benjamin Trent
Tim Brooks
Przemyslaw Gomulka
alex101101
Daniel Mitterdorfer
Alan Woodward
Armin Braun
Zachary Tong
Like
Zachary Tong
Dimitris Athanasiou
Albert Zaharovits
Ioannis Kakavas
Tamara Braun
Yogesh Gaikwad
lzh3636
Jake Landis
Ankit Jain
Julie Tibshirani
Gordon Brown
David Roberts
markharwood
Prabhakar S
Daniel Mitterdorfer
Tanguy Leroux
Tal Levy
Mark Tozzi
Lee Hinman
Igor Motov
Evgenia Badyanova
Marios Trivyzas
Ignacio Vera
Mirko Jotic
Hendrik Muhs
Nick Knize
Boaz Leskes