Several links from the ILM HLRC Javadoc to the online documentation were
not updated when the ILM HLRC documentation was written. This commit
fixes those links.
Adds `GET /_script_context`, returning a `contexts` object with each
available context as a key whose value is an empty object. eg.
```
{
"contexts": {
"aggregation_selector": {},
"aggs": {},
"aggs_combine": {},
...
}
}
```
refs: #47411
This adds parsing an inference model as a possible
result of the analytics process. When we do parse such a model
we persist a `TrainedModelConfig` into the inference index
that contains additional metadata derived from the running job.
which is backport merge and adds a new ingest processor, named enrich processor,
that allows document being ingested to be enriched with data from other indices.
Besides a new enrich processor, this PR adds several APIs to manage an enrich policy.
An enrich policy is in charge of making the data from other indices available to the enrich processor in an efficient manner.
Related to #32789
This change adds:
- A new option, allow_lazy_open, to anomaly detection jobs
- A new option, allow_lazy_start, to data frame analytics jobs
Both work in the same way: they allow a job to be
opened/started even if no ML node exists that can
accommodate the job immediately. In this situation
the job waits in the opening/starting state until ML
node capacity is available. (The starting state for data
frame analytics jobs is new in this change.)
Additionally, the ML nightly maintenance tasks now
creates audit warnings for ML jobs that are unassigned.
This means that jobs that cannot be assigned to an ML
node for a very long time will show a yellow warning
triangle in the UI.
A final change is that it is now possible to close a job
that is not assigned to a node without using force.
This is because previously jobs that were open but
not assigned to a node were an aberration, whereas
after this change they'll be relatively common.
This commit adds HLRC support and documentation for the SLM Start and
Stop APIs, as well as updating existing documentation where appropriate.
This commit also ensures that the SLM APIs are properly included in the
HLRC documentation.
Adds a new datafeed config option, max_empty_searches,
that tells a datafeed that has never found any data to stop
itself and close its associated job after a certain number
of real-time searches have returned no data.
Backport of #47922
This commit adds two APIs that allow to pause and resume
CCR auto-follower patterns:
// pause auto-follower
POST /_ccr/auto_follow/my_pattern/pause
// resume auto-follower
POST /_ccr/auto_follow/my_pattern/resume
The ability to pause and resume auto-follow patterns can be
useful in some situations, including the rolling upgrades of
cluster using a bi-directional cross-cluster replication scheme
(see #46665).
This commit adds a new active flag to the AutoFollowPattern
and adapts the AutoCoordinator and AutoFollower classes so
that it stops to fetch remote's cluster state when all auto-follow
patterns associate to the remote cluster are paused.
When an auto-follower is paused, remote indices that match the
pattern are just ignored: they are not added to the pattern's
followed indices uids list that is maintained in the local cluster
state. This way, when the auto-follow pattern is resumed the
indices created in the remote cluster in the meantime will be
picked up again and added as new following indices. Indices
created and then deleted in the remote cluster will be ignored
as they won't be seen at all by the auto-follower pattern at
resume time.
Backport of #47510 for 7.x
Currently there are two issues with serializing BulkByScrollResponse.
First, when deserializing from XContent, indexing exceptions and search
exceptions are switched. Additionally, search exceptions do no retain
the appropriate RestStatus code, so you must evaluate the status code
from the exception. However, the exception class is not always correctly
retained when serialized.
This commit adds tests in the failure case. Additionally, fixes the
swapping of failure types and adds the rest status code to the search
failure.
Adds the following parameters to `outlier_detection`:
- `compute_feature_influence` (boolean): whether to compute or not
feature influence scores
- `outlier_fraction` (double): the proportion of the data set assumed
to be outlying prior to running outlier detection
- `standardization_enabled` (boolean): whether to apply standardization
to the feature values
Backport of #47600
Use case:
User with `create_doc` index privilege will be allowed to only index new documents
either via Index API or Bulk API.
There are two cases that we need to think:
- **User indexing a new document without specifying an Id.**
For this ES auto generates an Id and now ES version 7.5.0 onwards defaults to `op_type` `create` we just need to authorize on the `op_type`.
- **User indexing a new document with an Id.**
This is problematic as we do not know whether a document with Id exists or not.
If the `op_type` is `create` then we can assume the user is trying to add a document, if it exists it is going to throw an error from the index engine.
Given these both cases, we can safely authorize based on the `op_type` value. If the value is `create` then the user with `create_doc` privilege is authorized to index new documents.
In the `AuthorizationService` when authorizing a bulk request, we check the implied action.
This code changes that to append the `:op_type/index` or `:op_type/create`
to indicate the implied index action.
This commit adds support to retrieve all API keys if the authenticated
user is authorized to do so.
This removes the restriction of specifying one of the
parameters (like id, name, username and/or realm name)
when the `owner` is set to `false`.
Closes#46887
* Remove eclipse conditionals
We used to have some meta projects with a `-test` prefix because
historically eclipse could not distinguish between test and main
source-sets and could only use a single classpath.
This is no longer the case for the past few Eclipse versions.
This PR adds the necessary configuration to correctly categorize source
folders and libraries.
With this change eclipse can import projects, and the visibility rules
are correct e.x. auto compete doesn't offer classes from test code or
`testCompile` dependencies when editing classes in `main`.
Unfortunately the cyclic dependency detection in Eclipse doesn't seem to
take the difference between test and non test source sets into account,
but since we are checking this in Gradle anyhow, it's safe to set to
`warning` in the settings. Unfortunately there is no setting to ignore
it.
This might cause problems when building since Eclipse will probably not
know the right order to build things in so more wirk might be necesarry.
* Add API to execute SLM retention on-demand (#47405)
This is a backport of #47405
This commit adds the `/_slm/_execute_retention` API endpoint. This
endpoint kicks off SLM retention and then returns immediately.
This in particular allows us to run retention without scheduling it
(for entirely manual invocation) or perform a one-off cleanup.
This commit also includes HLRC for the new API, and fixes an issue
in SLMSnapshotBlockingIntegTests where retention invoked prior to the
test completing could resurrect an index the internal test cluster
cleanup had already deleted.
Resolves#46508
Relates to #43663
* [ML][Inference] adding .ml-inference* index and storage (#47267)
* [ML][Inference] adding .ml-inference* index and storage
* Addressing PR comments
* Allowing null definition, adding validation tests for model config
* fixing line length
* adjusting for backport
Currently the policy config is placed directly in the json object
of the toplevel `policies` array field. For example:
```
{
"policies": [
{
"match": {
"name" : "my-policy",
"indices" : ["users"],
"match_field" : "email",
"enrich_fields" : [
"first_name",
"last_name",
"city",
"zip",
"state"
]
}
}
]
}
```
This change adds a `config` field in each policy json object:
```
{
"policies": [
{
"config": {
"match": {
"name" : "my-policy",
"indices" : ["users"],
"match_field" : "email",
"enrich_fields" : [
"first_name",
"last_name",
"city",
"zip",
"state"
]
}
}
}
]
}
```
This allows us in the future to add other information about policies
in the get policy api response.
The UI will consume this API to build an overview of all policies.
The UI may in the future include additional information about a policy
and the plan is to include that in the get policy api, so that this
information can be gathered in a single api call.
An example of the information that is likely to be added is:
* Last policy execution time
* The status of a policy (executing, executed, unexecuted)
* Information about the last failure if exists
Backport of #45794 to 7.x. Convert most `awaitBusy` calls to
`assertBusy`, and use asserts where possible. Follows on from #28548 by
@liketic.
There were a small number of places where it didn't make sense to me to
call `assertBusy`, so I kept the existing calls but renamed the method to
`waitUntil`. This was partly to better reflect its usage, and partly so
that anyone trying to add a new call to awaitBusy wouldn't be able to find
it.
I also didn't change the usage in `TransportStopRollupAction` as the
comments state that the local awaitBusy method is a temporary
copy-and-paste.
Other changes:
* Rework `waitForDocs` to scale its timeout. Instead of calling
`assertBusy` in a loop, work out a reasonable overall timeout and await
just once.
* Some tests failed after switching to `assertBusy` and had to be fixed.
* Correct the expect templates in AbstractUpgradeTestCase. The ES
Security team confirmed that they don't use templates any more, so
remove this from the expected templates. Also rewrite how the setup
code checks for templates, in order to give more information.
* Remove an expected ML template from XPackRestTestConstants The ML team
advised that the ML tests shouldn't be waiting for any
`.ml-notifications*` templates, since such checks should happen in the
production code instead.
* Also rework the template checking code in `XPackRestTestHelper` to give
more helpful failure messages.
* Fix issue in `DataFrameSurvivesUpgradeIT` when upgrading from < 7.4
In the current implementation, the validation of the role query
occurs at runtime when the query is being executed.
This commit adds validation for the role query when creating a role
but not for the template query as we do not have the runtime
information required for evaluating the template query (eg. authenticated user's
information). This is similar to the scripts that we
store but do not evaluate or parse if they are valid queries or not.
For validation, the query is evaluated (if not a template), parsed to build the
QueryBuilder and verify if the query type is allowed.
Closes#34252
This commit adds support for POST requests to the SLM `_execute` API,
because POST is a more appropriate HTTP verb for this action as it is
not idempotent. The docs are also changed to favor POST over PUT,
although PUT is not removed or officially deprecated.
Using arrays of objects with embedded IDs is preferred for new APIs over
using entity IDs as JSON keys. This commit changes the SLM stats API to
use the preferred format.
* [ML][Inference] Feature pre-processing objects and functions (#46777)
To support inference on pre-trained machine learning models, some basic feature encoding will be necessary. I am using a named object serialization approach so new encodings/pre-processing steps could be added in the future.
This PR lays down the ground work for 3 basic encodings:
* HotOne
* Target Mean
* Frequency
More feature encodings or pre-processings could be added in the future:
* Handling missing columns
* Standardization
* Label encoding
* etc....
* fixing compilation for namedxcontent tests
The HLRC has a method for reindex, that allows to trigger an async reindex by running RestHighLevelClient.submitReindexTask and RestHighLevelClient.reindex. The delete by query however only has an RestHighLevelClient.deleteByQuery method (and its async counterpart), but no RestHighLevelClient.submitDeleteByQueryTask. So add RestHighLevelClient.submitDeleteByQueryTask
Closes#46395
Currently the CountRequest accepts a search source builder, while the
RestCountAction only accepts a top level query object. This can lead
to confusion if another element (e.g. aggregations) is specified,
because that will be ignored on the server side in RestCountAction.
By deprecating the current setter & constructor that accept a
SearchSourceBuilder and adding replacement that accepts a QueryBuilder
it is clear what the count api can handle from HLRC side.
Follow up from #46829
* addSnapshotLifecyclePolicy drop version assertion
This drops the assertion on the policy version (which was pinned to 1L)
as we want to execute both put policy apis (sync and async) for
documentation purposes. This will sometimes (depending on the async
call) yield a version of 2L. Waiting for the async call to always
complete could be an option but the test is already rather slow and it's
a bit of an overkill as we're already verifying the policy was created.
(cherry picked from commit af4864c39129bcdbf98d00223f445346a62075e4)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Prior to this commit terminate_after was sent as request body parameter
(via SearchSourceBuilder), which is not possible in the count api.
Closes#46446
This commits makes all the async methods in the high level client return the `Cancellable` object that the low level client now exposes.
Relates to #45379Closes#44802
rename data frame transform plugin to transform:
- rename plugin data-frame to transform
- change all package names from o.e.*.dataframe.* to o.e.*.transform.*
- necessary changes to fix loading/testing
Changed the signature of AbstractResponseTestCase#createServerTestInstance(...)
to include the randomly selected xcontent type. This is needed for the
creating a server response instance with a query which is represented as BytesReference.
Maybe this should go into a different change?
This PR also includes HLRC docs for the get policy api.
Relates to #32789
* Add retention to Snapshot Lifecycle Management (#46407)
This commit adds retention to the existing Snapshot Lifecycle Management feature (#38461) as described in #43663. This allows a user to configure SLM to automatically delete older snapshots based on a number of criteria.
An example policy would look like:
```
PUT /_slm/policy/snapshot-every-day
{
"schedule": "0 30 2 * * ?",
"name": "<production-snap-{now/d}>",
"repository": "my-s3-repository",
"config": {
"indices": ["foo-*", "important"]
},
// Newly configured retention options
"retention": {
// Snapshots should be deleted after 14 days
"expire_after": "14d",
// Keep a maximum of thirty snapshots
"max_count": 30,
// Keep a minimum of the four most recent snapshots
"min_count": 4
}
}
```
SLM Retention is run on a scheduled configurable with the `slm.retention_schedule` setting, which supports cron expressions. Deletions are run for a configurable time bounded by the `slm.retention_duration` setting, which defaults to 1 hour.
Included in this work is a new SLM stats API endpoint available through
``` json
GET /_slm/stats
```
That returns statistics about snapshot taken and deleted, as well as successful retention runs, failures, and the time spent deleting snapshots. #45362 has more information as well as an example of the output. These stats are also included when retrieving SLM policies via the API.
* Add base framework for snapshot retention (#43605)
* Add base framework for snapshot retention
This adds a basic `SnapshotRetentionService` and `SnapshotRetentionTask`
to start as the basis for SLM's retention implementation.
Relates to #38461
* Remove extraneous 'public'
* Use a local var instead of reading class var repeatedly
* Add SnapshotRetentionConfiguration for retention configuration (#43777)
* Add SnapshotRetentionConfiguration for retention configuration
This commit adds the `SnapshotRetentionConfiguration` class and its HLRC
counterpart to encapsulate the configuration for SLM retention.
Currently only a single parameter is supported as an example (we still
need to discuss the different options we want to support and their
names) to keep the size of the PR down. It also does not yet include version serialization checks
since the original SLM branch has not yet been merged.
Relates to #43663
* Fix REST tests
* Fix more documentation
* Use Objects.equals to avoid NPE
* Put `randomSnapshotLifecyclePolicy` in only one place
* Occasionally return retention with no configuration
* Implement SnapshotRetentionTask's snapshot filtering and delet… (#44764)
* Implement SnapshotRetentionTask's snapshot filtering and deletion
This commit implements the snapshot filtering and deletion for
`SnapshotRetentionTask`. Currently only the expire-after age is used for
determining whether a snapshot is eligible for deletion.
Relates to #43663
* Fix deletes running on the wrong thread
* Handle missing or null policy in snap metadata differently
* Convert Tuple<String, List<SnapshotInfo>> to Map<String, List<SnapshotInfo>>
* Use the `OriginSettingClient` to work with security, enhance logging
* Prevent NPE in test by mocking Client
* Allow empty/missing SLM retention configuration (#45018)
Semi-related to #44465, this allows the `"retention"` configuration map
to be missing.
Relates to #43663
* Add min_count and max_count as SLM retention predicates (#44926)
This adds the configuration options for `min_count` and `max_count` as
well as the logic for determining whether a snapshot meets this criteria
to SLM's retention feature.
These options are optional and one, two, or all three can be specified
in an SLM policy.
Relates to #43663
* Time-bound deletion of snapshots in retention delete function (#45065)
* Time-bound deletion of snapshots in retention delete function
With a cluster that has a large number of snapshots, it's possible that
snapshot deletion can take a very long time (especially since deletes
currently have to happen in a serial fashion). To prevent snapshot
deletion from taking forever in a cluster and blocking other operations,
this commit adds a setting to allow configuring a maximum time to spend
deletion snapshots during retention. This dynamic setting defaults to 1
hour and is best-effort, meaning that it doesn't hard stop a deletion
at an hour mark, but ensures that once the time has passed, all
subsequent deletions are deferred until the next retention cycle.
Relates to #43663
* Wow snapshots suuuure can take a long time.
* Use a LongSupplier instead of actually sleeping
* Remove TestLogging annotation
* Remove rate limiting
* Add SLM metrics gathering and endpoint (#45362)
* Add SLM metrics gathering and endpoint
This commit adds the infrastructure to gather metrics about the different SLM actions that a cluster
takes. These actions are stored in `SnapshotLifecycleStats` and perpetuated in cluster state. The
stats stored include the number of snapshots taken, failed, deleted, the number of retention runs,
as well as per-policy counts for snapshots taken, failed, and deleted. It also includes the amount
of time spent deleting snapshots from SLM retention.
This commit also adds an endpoint for retrieving all stats (further commits will expose this in the
SLM get-policy API) that looks like:
```
GET /_slm/stats
{
"retention_runs" : 13,
"retention_failed" : 0,
"retention_timed_out" : 0,
"retention_deletion_time" : "1.4s",
"retention_deletion_time_millis" : 1404,
"policy_metrics" : {
"daily-snapshots2" : {
"snapshots_taken" : 7,
"snapshots_failed" : 0,
"snapshots_deleted" : 6,
"snapshot_deletion_failures" : 0
},
"daily-snapshots" : {
"snapshots_taken" : 12,
"snapshots_failed" : 0,
"snapshots_deleted" : 12,
"snapshot_deletion_failures" : 6
}
},
"total_snapshots_taken" : 19,
"total_snapshots_failed" : 0,
"total_snapshots_deleted" : 18,
"total_snapshot_deletion_failures" : 6
}
```
This does not yet include HLRC for this, as this commit is quite large on its own. That will be
added in a subsequent commit.
Relates to #43663
* Version qualify serialization
* Initialize counters outside constructor
* Use computeIfAbsent instead of being too verbose
* Move part of XContent generation into subclass
* Fix REST action for master merge
* Unused import
* Record history of SLM retention actions (#45513)
This commit records the deletion of snapshots by the retention component
of SLM into the SLM history index for the purposes of reviewing operations
taken by SLM and alerting.
* Retry SLM retention after currently running snapshot completes (#45802)
* Retry SLM retention after currently running snapshot completes
This commit adds a ClusterStateObserver to wait until the currently
running snapshot is complete before proceeding with snapshot deletion.
SLM retention waits for the maximum allowed deletion time for the
snapshot to complete, however, the waiting time is not factored into
the limit on actual deletions.
Relates to #43663
* Increase timeout waiting for snapshot completion
* Apply patch
From 2374316f0d.patch
* Rename test variables
* [TEST] Be less strict for stats checking
* Skip SLM retention if ILM is STOPPING or STOPPED (#45869)
This adds a check to ensure we take no action during SLM retention if
ILM is currently stopped or in the process of stopping.
Relates to #43663
* Check all actions preventing snapshot delete during retention (#45992)
* Check all actions preventing snapshot delete during retention run
Previously we only checked to see if a snapshot was currently running,
but it turns out that more things can block snapshot deletion. This
changes the check to be a check for:
- a snapshot currently running
- a deletion already in progress
- a repo cleanup in progress
- a restore currently running
This was found by CI where a third party delete in a test caused SLM
retention deletion to throw an exception.
Relates to #43663
* Add unit test for okayToDeleteSnapshots
* Fix bug where SLM retention task would be scheduled on every node
* Enhance test logging
* Ignore if snapshot is already deleted
* Missing import
* Fix SnapshotRetentionServiceTests
* Expose SLM policy stats in get SLM policy API (#45989)
This also adds support for the SLM stats endpoint to the high level rest client.
Retrieving a policy now looks like:
```json
{
"daily-snapshots" : {
"version": 1,
"modified_date": "2019-04-23T01:30:00.000Z",
"modified_date_millis": 1556048137314,
"policy" : {
"schedule": "0 30 1 * * ?",
"name": "<daily-snap-{now/d}>",
"repository": "my_repository",
"config": {
"indices": ["data-*", "important"],
"ignore_unavailable": false,
"include_global_state": false
},
"retention": {}
},
"stats": {
"snapshots_taken": 0,
"snapshots_failed": 0,
"snapshots_deleted": 0,
"snapshot_deletion_failures": 0
},
"next_execution": "2019-04-24T01:30:00.000Z",
"next_execution_millis": 1556048160000
}
}
```
Relates to #43663
* Rewrite SnapshotLifecycleIT as as ESIntegTestCase (#46356)
* Rewrite SnapshotLifecycleIT as as ESIntegTestCase
This commit splits `SnapshotLifecycleIT` into two different tests.
`SnapshotLifecycleRestIT` which includes the tests that do not require
slow repositories, and `SLMSnapshotBlockingIntegTests` which is now an
integration test using `MockRepository` to simulate a snapshot being in
progress.
Relates to #43663Resolves#46205
* Add error logging when exceptions are thrown
* Update serialization versions
* Fix type inference
* Use non-Cancellable HLRC return value
* Fix Client mocking in test
* Fix SLMSnapshotBlockingIntegTests for 7.x branch
* Update SnapshotRetentionTask for non-multi-repo snapshot retrieval
* Add serialization guards for SnapshotLifecyclePolicy
Since 7.3, the request converter for multiSearchTemplate would silently
not set the two request parameters `typed_keys` and
`max_concurrent_searches`.
Closes#46488
Besides a rename, this changes allows to processor to attach multiple
enrich docs to the document being ingested.
Also in order to control the maximum number of enrich docs to be
included in the document being ingested, the `max_matches` setting
is added to the enrich processor.
Relates #32789
Add XContentType as parameter to the
AbstractResponseTestCase#createServerTestInstance method.
In the case a server side response class serializes xcontent as
bytes then the test needs to know what xcontent type was randomily selected.
This change is needed in #45970
The existing privilege model for API keys with privileges like
`manage_api_key`, `manage_security` etc. are too permissive and
we would want finer-grained control over the cluster privileges
for API keys. Previously APIs created would also need these
privileges to get its own information.
This commit adds support for `manage_own_api_key` cluster privilege
which only allows api key cluster actions on API keys owned by the
currently authenticated user. Also adds support for retrieval of
the API key self-information when authenticating via API key
without the need for the additional API key privileges.
To support this privilege, we are introducing additional
authentication context along with the request context such that
it can be used to authorize cluster actions based on the current
user authentication.
The API key get and invalidate APIs introduce an `owner` flag
that can be set to true if the API key request (Get or Invalidate)
is for the API keys owned by the currently authenticated user only.
In that case, `realm` and `username` cannot be set as they are
assumed to be the currently authenticated ones.
The changes cover HLRC changes, documentation for the API changes.
Closes#40031
This commit introduces PKI realm delegation. This feature
supports the PKI authentication feature in Kibana.
In essence, this creates a new API endpoint which Kibana must
call to authenticate clients that use certificates in their TLS
connection to Kibana. The API call passes to Elasticsearch the client's
certificate chain. The response contains an access token to be further
used to authenticate as the client. The client's certificates are validated
by the PKI realms that have been explicitly configured to permit
certificates from the proxy (Kibana). The user calling the delegation
API must have the delegate_pki privilege.
Closes#34396
Previously, the stats API reports a progress percentage
for DF analytics tasks that are running and are in the
`reindexing` or `analyzing` state.
This means that when the task is `stopped` there is no progress
reported. Thus, one cannot distinguish between a task that never
run to one that completed.
In addition, there are blind spots in the progress reporting.
In particular, we do not account for when data is loaded into the
process. We also do not account for when results are written.
This commit addresses the above issues. It changes progress
to being a list of objects, each one describing the phase
and its progress as a percentage. We currently have 4 phases:
reindexing, loading_data, analyzing, writing_results.
When the task stops, progress is persisted as a document in the
state index. The stats API now reports progress from in-memory
if the task is running, or returns the persisted document
(if there is one).
A policy type controls how the enrich index is created and
the query executed against the match field. Currently there
is a single policy type (`exact_match`). In the near future
more policy types will be added and different policy may have
different configuration options.
For this reason type should be a json object instead of a string field:
```
{
"exact_match": {
...
}
}
```
instead of:
```
{
"type": "exact_match",
...
}
```
This will make streaming parsing of enrich policies easier as in the
new format, the parsing code can know ahead what configuration fields
to expect. In the latter format that is not possible if the type field
appears not as the first field.
Relates to #32789
* Repository Cleanup Endpoint (#43900)
* Snapshot cleanup functionality via transport/REST endpoint.
* Added all the infrastructure for this with the HLRC and node client
* Made use of it in tests and resolved relevant TODO
* Added new `Custom` CS element that tracks the cleanup logic.
Kept it similar to the delete and in progress classes and gave it
some (for now) redundant way of handling multiple cleanups but only allow one
* Use the exact same mechanism used by deletes to have the combination
of CS entry and increment in repository state ID provide some
concurrency safety (the initial approach of just an entry in the CS
was not enough, we must increment the repository state ID to be safe
against concurrent modifications, otherwise we run the risk of "cleaning up"
blobs that just got created without noticing)
* Isolated the logic to the transport action class as much as I could.
It's not ideal, but we don't need to keep any state and do the same
for other repository operations
(like getting the detailed snapshot shard status)
The get and list APIs are a single API in this commit. Whether
requesting one named policy or all policies, a list of policies is
returened. The list API code has all been removed and the GET api is
what remains, which contains much of the list response code.
Adjusts the cluster cleanup routine in ESRestTestCase to clean up SLM
test cases, and optionally wait for all snapshots to be deleted.
Waiting for all snapshots to be deleted, rather than failing if any are
in progress, is necessary for tests which use SLM policies because SLM
policies may be in the process of executing when the test ends.
This change adds the support for the RankFeatureQuery in the HLRC by
providing an extra dependency on mapper-extras-client. It also removes
the dependency on lang-painless in mapper-extras which is not needed
anymore since the move of the vector field into a dedicated module.
Closes#43634
This commit replaces task_state and indexer_state in the
data frame _stats output with a single top level state
that combines the two. It is defined as:
- failed if what's currently reported as task_state is failed
- stopped if there is no persistent task
- Otherwise what's currently reported as indexer_state
Backport of #45276
* [ML][Data Frame] Add update transform api endpoint (#45154)
This adds the ability to `_update` stored data frame transforms. All mutable fields are applied when the next checkpoint starts. The exception being `description`.
This PR contains all that is necessary for this addition:
* HLRC
* Docs
* Server side
This commit adds a deprecation warning in 7.x for the Force Merge API
when both only_expunge_deletes and max_num_segments are set in a request.
Relates #44761
introduces an abstraction for how checkpointing and synchronization works, covering
- retrieval of checkpoints
- check for updates
- retrieving stats information
This commit switches to using the full hash to build into the JAR
manifest, which is used in node startup and the REST main action to
display the build hash.
Today we recover a replica by copying operations from the primary's translog.
However we also retain some historical operations in the index itself, as long
as soft-deletes are enabled. This commit adjusts peer recovery to use the
operations in the index for recovery rather than those in the translog, and
ensures that the replication group retains enough history for use in peer
recovery by means of retention leases.
Reverts #38904 and #42211
Relates #41536
Backport of #45136 to 7.x.
* Rename indexlifecycle to ilm and snapshotlifecycle to slm (#44917)
As a followup to #44725 and #44608, which renamed the packages within
the x-pack project, this renames the packages within the core x-pack
project. It also renames 'snapshotlifecycle' within the HLRC to slm.
* Fix one more import
Adds an API to clone an index. This is similar to the index split and shrink APIs, just with the
difference that the number of primary shards is kept the same. In case where the filesystem
provides hard-linking capabilities, this is a very cheap operation.
Indexing cloning can be done by running `POST my_source_index/_clone/my_target_index` and it
supports the same options as the split and shrink APIs.
Closes#44128
This is a followup to #44350. The indexer stats used to
be persisted standalone, but now are only persisted as
part of a state-and-stats document. During the review
of #44350 it was decided that we'll stick with this
design, so there will never be a need for an indexer
stats object to store its transform ID as it is stored
on the enclosing document. This PR removes the indexer
stats document ID.
Backport of #44768
* Only emit deprecation warning if there was actual change of a datafeed's job_id.
* Add @Deprecated annotation to DatafeedUpdate.Builder#setJobId method
This change adjusts the data frame transforms stats
endpoint to return a structure that is easier to
understand.
This is a breaking change for clients of the data frame
transforms stats endpoint, but the feature is in beta so
stability is not guaranteed.
Backport of #44350
This commit converts all remaining TransportRequest and
TransportResponse classes to implement Writeable, and disallows
Streamable implementations.
relates #34389
This commit converts several more classes from streamable to writeable
in server, mostly within the o.e.index and o.e.persistent packages.
relates #34389
* Allow empty configuration for SLM policies
When putting or updating a snapshot lifecycle policy it was not possible
to elide the `config` map. This commit makes the configuration optional,
the same way that it is when taking a snapshot.
Relates to #38461
* Add Objects.requireNonNull for required parts of the policy
* Expose index age in ILM explain output
This adds the index's age to the ILM explain output, for example:
```
{
"indices" : {
"ilm-000001" : {
"index" : "ilm-000001",
"managed" : true,
"policy" : "full-lifecycle",
"lifecycle_date" : "2019-07-16T19:48:22.294Z",
"lifecycle_date_millis" : 1563306502294,
"age" : "1.34m",
"phase" : "hot",
"phase_time" : "2019-07-16T19:48:22.487Z",
... etc ...
}
}
}
```
This age can be used to tell when ILM will transition the index to the
next phase, based on that phase's `min_age`.
Resolves#38988
* Expose age in getters and in HLRC
This commit converts all remaining ActionType response classes to
writeable in xpack core. It also converts a few from server which were
used by xpack core.
relates #34389
* Migrate ML Actions to use writeable ActionType (#44302)
This commit converts all the StreamableResponseActionType
actions in the ML core module to be ActionType and leverage
the Writeable infrastructure.
* Add Snapshot Lifecycle Management (#43934)
* Add SnapshotLifecycleService and related CRUD APIs
This commit adds `SnapshotLifecycleService` as a new service under the ilm
plugin. This service handles snapshot lifecycle policies by scheduling based on
the policies defined schedule.
This also includes the get, put, and delete APIs for these policies
Relates to #38461
* Make scheduledJobIds return an immutable set
* Use Object.equals for SnapshotLifecyclePolicy
* Remove unneeded TODO
* Implement ToXContentFragment on SnapshotLifecyclePolicyItem
* Copy contents of the scheduledJobIds
* Handle snapshot lifecycle policy updates and deletions (#40062)
(Note this is a PR against the `snapshot-lifecycle-management` feature branch)
This adds logic to `SnapshotLifecycleService` to handle updates and deletes for
snapshot policies. Policies with incremented versions have the old policy
cancelled and the new one scheduled. Deleted policies have their schedules
cancelled when they are no longer present in the cluster state metadata.
Relates to #38461
* Take a snapshot for the policy when the SLM policy is triggered (#40383)
(This is a PR for the `snapshot-lifecycle-management` branch)
This commit fills in `SnapshotLifecycleTask` to actually perform the
snapshotting when the policy is triggered. Currently there is no handling of the
results (other than logging) as that will be added in subsequent work.
This also adds unit tests and an integration test that schedules a policy and
ensures that a snapshot is correctly taken.
Relates to #38461
* Record most recent snapshot policy success/failure (#40619)
Keeping a record of the results of the successes and failures will aid
troubleshooting of policies and make users more confident that their
snapshots are being taken as expected.
This is the first step toward writing history in a more permanent
fashion.
* Validate snapshot lifecycle policies (#40654)
(This is a PR against the `snapshot-lifecycle-management` branch)
With the commit, we now validate the content of snapshot lifecycle policies when
the policy is being created or updated. This checks for the validity of the id,
name, schedule, and repository. Additionally, cluster state is checked to ensure
that the repository exists prior to the lifecycle being added to the cluster
state.
Part of #38461
* Hook SLM into ILM's start and stop APIs (#40871)
(This pull request is for the `snapshot-lifecycle-management` branch)
This change allows the existing `/_ilm/stop` and `/_ilm/start` APIs to also
manage snapshot lifecycle scheduling. When ILM is stopped all scheduled jobs are
cancelled.
Relates to #38461
* Add tests for SnapshotLifecyclePolicyItem (#40912)
Adds serialization tests for SnapshotLifecyclePolicyItem.
* Fix improper import in build.gradle after master merge
* Add human readable version of modified date for snapshot lifecycle policy (#41035)
* Add human readable version of modified date for snapshot lifecycle policy
This small change changes it from:
```
...
"modified_date": 1554843903242,
...
```
To
```
...
"modified_date" : "2019-04-09T21:05:03.242Z",
"modified_date_millis" : 1554843903242,
...
```
Including the `"modified_date"` field when the `?human` field is used.
Relates to #38461
* Fix test
* Add API to execute SLM policy on demand (#41038)
This commit adds the ability to perform a snapshot on demand for a policy. This
can be useful to take a snapshot immediately prior to performing some sort of
maintenance.
```json
PUT /_ilm/snapshot/<policy>/_execute
```
And it returns the response with the generated snapshot name:
```json
{
"snapshot_name" : "production-snap-2019.04.09-rfyv3j9qreixkdbnfuw0ug"
}
```
Note that this does not allow waiting for the snapshot, and the snapshot could
still fail. It *does* record this information into the cluster state similar to
a regularly trigged SLM job.
Relates to #38461
* Add next_execution to SLM policy metadata (#41221)
* Add next_execution to SLM policy metadata
This adds the next time a snapshot lifecycle policy will be executed when
retriving a policy's metadata, for example:
```json
GET /_ilm/snapshot?human
{
"production" : {
"version" : 1,
"modified_date" : "2019-04-15T21:16:21.865Z",
"modified_date_millis" : 1555362981865,
"policy" : {
"name" : "<production-snap-{now/d}>",
"schedule" : "*/30 * * * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"foo-*",
"important"
],
"ignore_unavailable" : true,
"include_global_state" : false
}
},
"next_execution" : "2019-04-15T21:16:30.000Z",
"next_execution_millis" : 1555362990000
},
"other" : {
"version" : 1,
"modified_date" : "2019-04-15T21:12:19.959Z",
"modified_date_millis" : 1555362739959,
"policy" : {
"name" : "<other-snap-{now/d}>",
"schedule" : "0 30 2 * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"other"
],
"ignore_unavailable" : false,
"include_global_state" : true
}
},
"next_execution" : "2019-04-16T02:30:00.000Z",
"next_execution_millis" : 1555381800000
}
}
```
Relates to #38461
* Fix and enhance tests
* Figured out how to Cron
* Change SLM endpoint from /_ilm/* to /_slm/* (#41320)
This commit changes the endpoint for snapshot lifecycle management from:
```
GET /_ilm/snapshot/<policy>
```
to:
```
GET /_slm/policy/<policy>
```
It mimics the ILM path only using `slm` instead of `ilm`.
Relates to #38461
* Add initial documentation for SLM (#41510)
* Add initial documentation for SLM
This adds the initial documentation for snapshot lifecycle management.
It also includes the REST spec API json files since they're sort of
documentation.
Relates to #38461
* Add `manage_slm` and `read_slm` roles (#41607)
* Add `manage_slm` and `read_slm` roles
This adds two more built in roles -
`manage_slm` which has permission to perform any of the SLM actions, as well as
stopping, starting, and retrieving the operation status of ILM.
`read_slm` which has permission to retrieve snapshot lifecycle policies as well
as retrieving the operation status of ILM.
Relates to #38461
* Add execute to the test
* Fix ilm -> slm typo in test
* Record SLM history into an index (#41707)
It is useful to have a record of the actions that Snapshot Lifecycle
Management takes, especially for the purposes of alerting when a
snapshot fails or has not been taken successfully for a certain amount of
time.
This adds the infrastructure to record SLM actions into an index that
can be queried at leisure, along with a lifecycle policy so that this
history does not grow without bound.
Additionally,
SLM automatically setting up an index + lifecycle policy leads to
`index_lifecycle` custom metadata in the cluster state, which some of
the ML tests don't know how to deal with due to setting up custom
`NamedXContentRegistry`s. Watcher would cause the same problem, but it
is already disabled (for the same reason).
* High Level Rest Client support for SLM (#41767)
* High Level Rest Client support for SLM
This commit add HLRC support for SLM.
Relates to #38461
* Fill out documentation tests with tags
* Add more callouts and asciidoc for HLRC
* Update javadoc links to real locations
* Add security test testing SLM cluster privileges (#42678)
* Add security test testing SLM cluster privileges
This adds a test to `PermissionsIT` that uses the `manage_slm` and `read_slm`
cluster privileges.
Relates to #38461
* Don't redefine vars
* Add Getting Started Guide for SLM (#42878)
This commit adds a basic Getting Started Guide for SLM.
* Include SLM policy name in Snapshot metadata (#43132)
Keep track of which SLM policy in the metadata field of the Snapshots
taken by SLM. This allows users to more easily understand where the
snapshot came from, and will enable future SLM features such as
retention policies.
* Fix compilation after master merge
* [TEST] Move exception wrapping for devious exception throwing
Fixes an issue where an exception was created from one line and thrown in another.
* Fix SLM for the change to AcknowledgedResponse
* Add Snapshot Lifecycle Management Package Docs (#43535)
* Fix compilation for transport actions now that task is required
* Add a note mentioning the privileges needed for SLM (#43708)
* Add a note mentioning the privileges needed for SLM
This adds a note to the top of the "getting started with SLM"
documentation mentioning that there are two built-in privileges to
assist with creating roles for SLM users and administrators.
Relates to #38461
* Mention that you can create snapshots for indices you can't read
* Fix REST tests for new number of cluster privileges
* Mute testThatNonExistingTemplatesAreAddedImmediately (#43951)
* Fix SnapshotHistoryStoreTests after merge
* Remove overridden newResponse functions that have been removed
* Fix compilation for backport
* Fix get snapshot output parsing in test
* [DOCS] Add redirects for removed autogen anchors (#44380)
* Switch <tt>...</tt> in javadocs for {@code ...}
This commit converts all the StreamableResponseActionType security
classes in xpack core to ActionType, implementing Writeable for their
response classes.
relates #34389
Test clusters currently has its own set of logic for dealing with
finding different versions of Elasticsearch, downloading them, and
extracting them. This commit converts testclusters to use the
DistributionDownloadPlugin.
* HLRC: Fix '+' Not Correctly Encoded in GET Req.
* Encode `+` correctly as `%2B` in URL paths
* Keep encoding `+` as space in URL parameters
* Closes#33077
Currently we loose information about whether a token list in an AnalyzeAction
response is null or an empty list, because we write a 0 value to the stream in
both cases and deserialize to a null value on the receiving side. This change
fixes this so we write an additional flag indicating whether the value is null
or not, followed by the size of the list and its content.
Closes#44078
Rewrites how continuous data frame transforms calculates and handles buckets that require an update. Instead of storing the whole set in memory, it pages through the updates using a 2nd cursor. This lowers memory consumption and prevents problems with limits at query time (max_terms_count). The list of updates can be re-retrieved in a failure case (#43662)
The base classes for transport requests and responses currently
implement Streamable and Writeable. The writeTo method on these base
classes is implemented with an empty implementation. Not only does this
complicate subclasses to think they need to call super.writeTo, but it
also can lead to not implementing writeTo when it should have been
implemented, or extendiong one of these classes when not necessary,
since there is nothing to actually implement.
This commit removes the empty writeTo from these base classes, and fixes
subclasses to not call super and in some cases implement an empty
writeTo themselves.
relates #34389
Previously a data frame transform would check whether the
source index was changed every 10 seconds. Sometimes it
may be desirable for the check to be done less frequently.
This commit increases the default to 60 seconds but also
allows the frequency to be overridden by a setting in the
data frame transform config.
The rest client does not communicate over the transport protocol.
However, in the move to make all apis supported in the HLRC, some
response classes were copied with extending ActionResponse, which is
meant strictly for the transport protocol. This commit removes uses of
that base class from HLRC.
Currently we log a deprecation warning to the types removal in
RestGetIndicesAction even if the REST method is HEAD, which is used by the
indices.exists API. Since the body is empty in this case we should not need to
show the deprecation warning.
Closes#43905
In MachineLearningIT.testStopDataFrameAnalytics we call start and
then assert the state is `started`. However, if things go fast enough,
the state could have already changed to `reindexing` or `analyzing`.
The test has been failing occasionally due to the state being
`reindexing`. We fix this by simply asserting the state is either
of `started`, `reindexing` or `analyzing`.
Closes#43924
This introduces a `failed` state to which the data frame analytics
persistent task is set to when something unexpected fails. It could
be the process crashing, the results processor hitting some error,
etc. The failure message is then captured and set on the task state.
From there, it becomes available via the _stats API as `failure_reason`.
The df-analytics stop API now has a `force` boolean parameter. This allows
the user to call it for a failed task in order to reset it to `stopped` after
we have ensured the failure has been communicated to the user.
This commit also adds the analytics version in the persistent task
params as this allows us to prevent tasks to run on unsuitable nodes in
the future.
* [ML][Data Frame] add node attr to GET _stats (#43842)
* [ML][Data Frame] add node attr to GET _stats
* addressing testing issues with node.attributes
* adjusting for backport
Adds the monitor_data_frame_transforms and
manage_data_frame_transforms cluster privileges to
the high level rest client.
The ALL_ARRAY variable is only used in randomized
tests at the within the Elasticsearch code, so it's
not a major problem that these cluster privileges
weren't added from the start. But since ALL_ARRAY
is public HLRC users may be using it to find out
which cluster privileges exist, so it's best that
it contains them all.
This commit adds support for multiple source indices.
In order to deal with multiple indices having different mappings,
it attempts a best-effort approach to merge the mappings assuming
there are no conflicts. In case conflicts exists an error will be
returned.
To allow users creating custom mappings for special use cases,
the destination index is now allowed to exist before the analytics
job runs. In addition, settings are no longer copied except for
the `index.number_of_shards` and `index.number_of_replicas`.
Currently changing resources (like dictionaries, synonym files etc...) of search
time analyzers is only possible by closing an index, changing the underlying
resource (e.g. synonym files) and then re-opening the index for the change to
take effect.
This PR adds a new API endpoint that allows triggering reloading of certain
analysis resources (currently token filters) that will then pick up changes in
underlying file resources. To achieve this we introduce a new type of custom
analyzer (ReloadableCustomAnalyzer) that uses a ReuseStrategy that allows
swapping out analysis components. Custom analyzers that contain filters that are
markes as "updateable" will automatically choose this implementation. This PR
also adds this capability to `synonym` token filters for use in search time
analyzers.
Relates to #29051
* [ML][Data Frame] Add support for allow_no_match for endpoints (#43490)
* [ML][Data Frame] Add support for allow_no_match parameter in endpoints
Adds support for:
* Get Transforms
* Get Transforms stats
* stop transforms
* Update DataFrameTransformDocumentationIT.java
This merges the initial work that adds a framework for performing
machine learning analytics on data frames. The feature is currently experimental
and requires a platinum license. Note that the original commits can be
found in the `feature-ml-data-frame-analytics` branch.
A new set of APIs is added which allows the creation of data frame analytics
jobs. Configuration allows specifying different types of analysis to be performed
on a data frame. At first there is support for outlier detection.
The APIs are:
- PUT _ml/data_frame/analysis/{id}
- GET _ml/data_frame/analysis/{id}
- GET _ml/data_frame/analysis/{id}/_stats
- POST _ml/data_frame/analysis/{id}/_start
- POST _ml/data_frame/analysis/{id}/_stop
- DELETE _ml/data_frame/analysis/{id}
When a data frame analytics job is started a persistent task is created and started.
The main steps of the task are:
1. reindex the source index into the dest index
2. analyze the data through the data_frame_analyzer c++ process
3. merge the results of the process back into the destination index
In addition, an evaluation API is added which packages commonly used metrics
that provide evaluation of various analysis:
- POST _ml/data_frame/_evaluate
This commit adds the manage_enrich privilege, which grants access to all
of the enrich processor lifecycle actions. In addition this commit also
creates a role which grants access to the generated indices.
Relates #41939
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
This commit replaces usages of Streamable with Writeable for the
AcknowledgedResponse and its subclasses, plus associated actions.
Note that where possible response fields were made final and default
constructors were removed.
This is a large PR, but the change is mostly mechanical.
Relates to #34389
Backport of #43414
* [ML][Data Frame] Add version and create_time to transform config (#43384)
* [ML][Data Frame] Add version and create_time to transform config
* s/transform_version/version s/Date/Instant
* fixing getter/setter for version
* adjusting for backport
* [ML][Data Frame] make response.count be total count of hits
* addressing line length check
* changing response count for filters
* adjusting serialization, variable name, and total count logic
* making count mandatory for creation
* [ML][Data Frame] adds new pipeline field to dest config (#43124)
* [ML][Data Frame] adds new pipeline field to dest config
* Adding pipeline support to _preview
* removing unused import
* moving towards extracting _source from pipeline simulation
* fixing permission requirement, adding _index entry to doc
* adjusting for java 8 compatibility
* adjusting bwc serialization version to 7.3.0
Kibana wants to create access_token/refresh_token pair using Token
management APIs in exchange for kerberos tickets. `client_credentials`
grant_type requires every user to have `cluster:admin/xpack/security/token/create`
cluster privilege.
This commit introduces `_kerberos` grant_type for generating `access_token`
and `refresh_token` in exchange for a valid base64 encoded kerberos ticket.
In addition, `kibana_user` role now has cluster privilege to create tokens.
This allows Kibana to create access_token/refresh_token pair in exchange for
kerberos tickets.
Note:
The lifetime from the kerberos ticket is not used in ES and so even after it expires
the access_token/refresh_token pair will be valid. Care must be taken to invalidate
such tokens using token management APIs if required.
Closes#41943
The xpack info api currently returns native code info within each
feature. This commit deprecates retrieving that info, which is now
available directly in the ML info api.
The painless context api is internal and currently meant only for use in
generating docs. This commit moves the spec file for the api so that it
is only used by the test for this api, and not externally by any clients
building from the public rest spec.
The description field of xpack featuresets is optionally part of the
xpack info api, when using the verbose flag. However, this information
is unnecessary, as it is better left for documentation (and the existing
descriptions describe anything meaningful). This commit removes the
description field from feature sets.
Previously, a reindex request had two different size specifications in the body:
* Outer level, determining the maximum documents to process
* Inside the source element, determining the scroll/batch size.
The outer level size has now been renamed to max_docs to
avoid confusion and clarify its semantics, with backwards compatibility and
deprecation warnings for using size.
Similarly, the size parameter has been renamed to max_docs for
update/delete-by-query to keep the 3 interfaces consistent.
Finally, all 3 endpoints now support max_docs in both body and URL.
Relates #24344
This change adds the earliest and latest timestamps into
the field stats for fields of type "date" in the output of
the ML find_file_structure endpoint. This will enable the
cards for date fields in the file data visualizer in the UI
to be made to look more similar to the cards for date
fields in the index data visualizer in the UI.
Adds a metadata field to snapshots which can be used to store arbitrary
key-value information. This may be useful for attaching a description of
why a snapshot was taken, tagging snapshots to make categorization
easier, or identifying the source of automatically-created snapshots.
This commit adds functionality so that aliases that are manipulated on
leader indices are replicated by the shard follow tasks to the follower
indices. Note that we ignore write indices. This is due to the fact that
follower indices do not receive direct writes so the concept is not
useful.
Relates #41815
When analysing a semi-structured text file the
find_file_structure endpoint merges lines to form
multi-line messages using the assumption that the
first line in each message contains the timestamp.
However, if the timestamp is misdetected then this
can lead to excessive numbers of lines being merged
to form massive messages.
This commit adds a line_merge_size_limit setting
(default 10000 characters) that halts the analysis
if a message bigger than this is created. This
prevents significant CPU time being spent subsequently
trying to determine the internal structure of the
huge bogus messages.
This commit clones the existing AnalyzeRequest/AnalyzeResponse classes
to the high-level rest client, and adjusts request converters to use these new
classes.
This is a prerequisite to removing the Streamable interface from the internal
server version of these classes.
In hamcrest 2.1 warnings for unchecked varargs were fixed by hamcrest using @SafeVarargs for those matchers where this warning occurred.
This PR is aimed to remove these annotations when Matchers.contains ,Matchers.containsInAnyOrder or Matchers.hasItems was used
backport #41528
The existing `RequestConverters.Params` is confusing, because it wraps
an underlying request object and mutations of the `Params` object
actually mutate the `Request` that was used in the construction of the
`Params`.
This leads to a situation where we create a `RequestConverter.Params`
object, mutate it, and then it appears nothing happens to it - it
appears to be unused. What happens behind the scenes is that the Request
object is mutated when methods on `Params` are invoked. This results in
unclear, confusing code where mutating one object changes another with
no obvious connection.
This commit refactors `RequestConverters.Params` to be a simple helper
class to produce a `Map` which must be passed explicitly to a Request
object. This makes it apparent that the `Params` are actually used, and
that they have an effect on the `request` object explicit and easier to
understand.
Co-authored-by: Ojas Gulati <ojasgulati100@gmail.com>
* Now that we process the bulk requests themselves on the WRITE threadpool, they can run out of retries too like the item requests even when backoff is active
* Fixes#41324 by using the same logic that checks failed item requests for their retry status for the top level bulk requests as well
* add support for fixed_interval, calendar_interval, remove interval
* adapt HLRC
* checkstyle
* add a hlrc to server test
* adapt yml test
* improve naming and doc
* improve interface and add test code for hlrc to server
* address review comments
* repair merge conflict
* fix date patterns
* address review comments
* remove assert for warning
* improve exception message
* use constants
Removing of payload in BulkRequest (#39843) had a side effect of making
`BulkRequest.add(DocWriteRequest<?>...)` (with varargs) recursive, thus
leading to StackOverflowError. This PR adds a small change in
RequestConvertersTests to show the error and the corresponding fix in
`BulkRequest`.
Fixes#41668
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
Improve the hard_limit memory audit message by reporting how many bytes
over the configured memory limit the job was at the point of the last
allocation failure.
Previously the model memory usage was reported, however this was
inaccurate and hence of limited use - primarily because the total
memory used by the model can decrease significantly after the models
status is changed to hard_limit but before the model size stats are
reported from autodetect to ES.
While this PR contains the changes to the format of the hard_limit audit
message it is dependent on modifications to the ml-cpp backend to
send additional data fields in the model size stats message. These
changes will follow in a subsequent PR. It is worth noting that this PR
must be merged prior to the ml-cpp one, to keep CI tests happy.
* [ML] adding pivot.size option for setting paging size
* Changing field name to address PR comments
* fixing ctor usage
* adjust hlrc for field name change
* [ML] Adds progress reporting for transforms
* fixing after master merge
* Addressing PR comments
* removing unused imports
* Adjusting afterKey handling and percentage to be 100*
* Making sure it is a linked hashmap for serialization
* removing unused import
* addressing PR comments
* removing unused import
* simplifying code, only storing total docs and decrementing
* adjusting for rewrite
* removing initial progress gathering from executor
Today the `_field_caps` API returns the list of indices where a field
is present only if this field has different types within the requested indices.
However if the request is an index pattern (or an alias, or both...) there
is no way to infer the indices if the response contains only fields that have
the same type in all indices. This commit changes the response to always return
the list of indices in the response. It also adds a way to retrieve unmapped field
in a specific section per field called `unmapped`. This section is created for each field
that is present in some indices but not all if the parameter `include_unmapped` is set to
true in the request (defaults to false).
In order to support empty action metadata in the first msearch item,
we need to remove support for prepending msearch request body with an
empty line, which prevents us from parsing the empty line as action
metadata for the first search item.
Relates to #41011
hamcrest has some improvements in newer versions, like FileMatchers
that make assertions regarding file exists cleaner. This commit upgrades
to the latest version of hamcrest so we can start using new and improved
matchers.
* The test fails for the retry backoff enabled case because the retry handler in the bulk processor hasn't been adjusted to account for #40866 which now might lead to an outright rejection of the request instead of its items individually
* Fixed by adding retry functionality to the top level request as well
* Also fixed the duplicate test for the HLRC that wasn't handling the non-backoff case yet the same way the non-client IT did
* closes#41324
This change adds either ToXContentObject or ToXContentFragment to classes
directly implementing ToXContent currently. This helps in reasoning about
whether those implementations output full xcontent object or just fragments.
Relates to #16347
* moved hlrc parsing tests from xpack to hlrc module and removed dependency on hlrc from xpack core
* deprecated old base test class
* added deprecated jdoc tag
* split test between xpack-core part and hlrc part
* added lang-mustache test dependency, this previously came in via
hlrc dependency.
* added hlrc dependency on a qa module
* duplicated ClusterPrivilegeName class in xpack-core, since x-pack
core no longer has a dependency on hlrc.
* replace ClusterPrivilegeName usages with string literals
* moved tests to dedicated to hlrc packages in order to remove Hlrc part from the name and make sure to use imports instead of full qualified class where possible
* remove ESTestCase. from method invocation and use method directly,
because these tests indirectly extend from ESTestCase
changed hlrc ccr request tests to use AbstractRequestTestCase base class.
This way the request classes are tested in a more realistic setting.
Note this change also adds a test dependency on xpack core module.
Similar to #39844 but then for hlrc request serialization tests.
Removed iterators from hlrc parsing tests.
Use empty xcontent registries.
Relates to #39745
Made changes to ensure that unique IDs are generated for model snapshots
used by the deleteExpiredDataTest test in the MachineLearningIT suite.
Previously a sleep of 1s was performed between jobs under the assumption
that this would be sufficient to guarantee that the timestamps used in
the composition of the snapshot IDs would be different.
The new approach is to wait on the condition that the old and new
timestamps are in fact different (to 1s resolution).
This commit fixes a problem with BWC that was brought up in #40511. A
newer version of the code was emitting a new value for an enum to an
older version, and the older version could not handle that. It caused
the response to error. The MainResponse is now relaxed, and will accept
whatever values the server expose, and holds most of them as Strings
instead of complex objects.
Fixes#40511
This adds a new `role_templates` field to role mappings that is an
alternative to the existing roles field.
These templates are evaluated at runtime to determine which roles should be
granted to a user.
For example, it is possible to specify:
"role_templates": [
{ "template":{ "source": "_user_{{username}}" } }
]
which would mean that every user is assigned to their own role based on
their username.
You may not specify both roles and role_templates in the same role
mapping.
This commit adds support for templates to the role mapping API, the role
mapping engine, the Java high level rest client, and Elasticsearch
documentation.
Due to the lack of caching in our role mapping store, it is currently
inefficient to use a large number of templated role mappings. This will be
addressed in a future change.
Backport of: #39984, #40504
It initially mentioned the type in the exception because the type used to be
required to uniquely identify a document. This is not necessary anymore given
that indices have at most one type.
The reindex family of APIs (reindex, update-by-query, delete-by-query) can
sometimes return responses that have an error status code (409 Conflict in this
case) but still have a body in the usual BulkByScrollResponse format. When the
HLRC tries to handle such responses, it blows up because it tris to parse it
expecting the error format that errors in general use. This change prompts the
HLRC to parse the response using the expected BulkByScrollResponse format.
* [ML] Add data frame task state object and field
* A new state item is added so that the overall task state can be
accoutned for
* A new FAILED state and reason have been added as well so that failures
can be shown to the user for optional correction
* Addressing PR comments
* adjusting after master merge
* addressing pr comment
* Adjusting auditor usage with failure state
* Refactor, renamed state items to task_state and indexer_state
* Adding todo and removing redundant auditor call
* Address HLRC changes and PR comment
* adjusting hlrc IT test
* [ML] make source and dest objects in the transform config
* addressing PR comments
* Fixing compilation post merge
* adding comment for Arrays.hashCode
* addressing changes for moving dest to object
* fixing data_frame yml tests
* fixing API test
The base class facilitates generating a server side response test instance,
that gets serialized as xcontent, which then gets parsed into a hlrc response
instance, which then gets asserted against the server side response instance.
This way of testing is more realistic then how hlrc response classes are tested
today, which basically tests that serialization works by generating
hlrc response instance, serialize that to xcontent and then parse it back
to a hlrc response instance.
Besides adding a base test class, this change also cuts AcknowledgedResponseTests
and BroadcastResponseTests over to use this base class.
Relates to #39745
The Migration Assistance API has been functionally replaced by the
Deprecation Info API, and the Migration Upgrade API is not used for the
transition from ES 6.x to 7.x, and does not need to be kept around to
repair indices that were not properly upgraded before upgrading the
cluster, as was the case in 6.
This PR adds an internal REST API for querying context information about
Painless whitelists.
Commands include the following:
GET /_scripts/painless/_context -- retrieves a list of contexts
GET /_scripts/painless/_context?context=%name% retrieves all available
information about the API for this specific context
As discovered in #40041, when parsing certificates from files, the
SUN Security Provider normalizes DNs from parsed certificates by
adding spaces between RDNs, while the BouncyCastle one (which we
use in FIPS tests) does not.
We could proceed to normalize the DNs in the same manner in this
test by using i.e. the Unbound LDAP SDK but since the goal of this
test is to validate that we do get to read these exact certificates
from our trust sources and not to validate subject DNs, this commit
changes the test to check the serial number instead
Resolves: #40041
The monitoring bulk API accepts the same format as the bulk API, yet its concept
of types is different from "mapping types" and the deprecation warning is only
emitted as a side-effect of this API reusing the parsing logic of bulk requests.
This commit extracts the parsing logic from `_bulk` into its own class with a
new flag that allows to configure whether usage of `_type` should emit a warning
or not. Support for payloads has been removed for simplicity since they were
unused.
@jakelandis has a separate change that removes this notion of type from the
monitoring bulk API that we are considering bringing to 8.0.
This commit introduces the forget follower API. This API is needed in cases that
unfollowing a following index fails to remove the shard history retention leases
on the leader index. This can happen explicitly through user action, or
implicitly through an index managed by ILM. When this occurs, history will be
retained longer than necessary. While the retention lease will eventually
expire, it can be expensive to allow history to persist for that long, and also
prevent ILM from performing actions like shrink on the leader index. As such, we
introduce an API to allow for manual removal of the shard history retention
leases in this case.
This change adds two new cluster privileges:
* manage_data_frame_transforms
* monitor_data_frame_transforms
And two new built-in roles:
* data_frame_transforms_admin
* data_frame_transforms_user
These permit access to the data frame transform endpoints.
(Index privileges are also required on the source and
destination indices for each data frame transform, but
since these indices are configurable they it is not
appropriate to grant them via built-in roles.)
The data frame plugin allows users to create feature indexes by pivoting a source index. In a
nutshell this can be understood as reindex supporting aggregations or similar to the so called entity
centric indexing.
Full history is provided in: feature/data-frame-transforms
Updated IndexTemplateMetaData to use ObjectParser.
The IndexTemplateMetaData class used old parsing logic and was not
resiliant to new fields. This commit updates it to use the
ConstructingObjectParser and allow unknown fields.
Relates #36938
Co-authored-by: Michael Basnight <mbasnight@gmail.com>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
This test has been disabled since November 2018, but I was not able to reproduce
the failure. Re-enabling this so we can see the full log and get more context if
it fails again.
Relates to #35514
Elasticsearch has long [supported](https://www.elastic.co/guide/en/elasticsearch/reference/current/docs-index_.html#index-versioning) compare and set (a.k.a optimistic concurrency control) operations using internal document versioning. Sadly that approach is flawed and can sometime do the wrong thing. Here's the relevant excerpt from the resiliency status page:
> When a primary has been partitioned away from the cluster there is a short period of time until it detects this. During that time it will continue indexing writes locally, thereby updating document versions. When it tries to replicate the operation, however, it will discover that it is partitioned away. It won’t acknowledge the write and will wait until the partition is resolved to negotiate with the master on how to proceed. The master will decide to either fail any replicas which failed to index the operations on the primary or tell the primary that it has to step down because a new primary has been chosen in the meantime. Since the old primary has already written documents, clients may already have read from the old primary before it shuts itself down. The version numbers of these reads may not be unique if the new primary has already accepted writes for the same document
We recently [introduced](https://www.elastic.co/guide/en/elasticsearch/reference/6.x/optimistic-concurrency-control.html) a new sequence number based approach that doesn't suffer from this dirty reads problem.
This commit removes support for internal versioning as a concurrency control mechanism in favor of the sequence number approach.
Relates to #1078
`CreateIndexRequest#source(Map<String, Object>, ... )`, which is used when
deserializing index creation requests, accidentally accepts mappings that are
nested twice under the type key (as described in the bug report #38266).
This in turn causes us to be too lenient in parsing typeless mappings. In
particular, we accept the following index creation request, even though it
should not contain the type key `_doc`:
```
PUT index?include_type_name=false
{
"mappings": {
"_doc": {
"properties": { ... }
}
}
}
```
There is a similar issue for both 'put templates' and 'put mappings' requests
as well.
This PR makes the minimal changes to detect and reject these typed mappings in
requests. It does not address #38266 generally, or attempt a larger refactor
around types in these server-side requests, as I think this should be done at a
later time.
This PR fixes a couple test issues:
* It narrows an assertWarnings call that was too broad, and wasn't always
applicable with certain random sequences.
* Previously, we could send a typeless bulk request containing '_type: 'null'.
Now we omit the _type key altogether for typeless requests.
This commit ensures that the parts of rollup caps that can allow unknown
fields will allow them. It also modifies the test such that we can use
the features we need for disallowing fields in spots where they would
not be allowed.
Relates #36938
Introduced FollowParameters class that put follow, resume follow,
put auto follow pattern requests and follow info response classes reuse.
The FollowParameters class had the fields, getters etc. for the common parameters
that all these APIs have. Also binary and xcontent serialization /
parsing is handled by this class.
The follow, resume follow, put auto follow pattern request classes originally
used optional non primitive fields, so FollowParameters has that too and the follow info api can handle that now too.
Also the followerIndex field can in production only be specified via
the url path. If it is also specified via the request body then
it must have the same value as is specified in the url path. This
option only existed to xcontent testing. However the AbstractSerializingTestCase
base class now also supports createXContextTestInstance() to provide
a different test instance when testing xcontent, so allowing followerIndex
to be specified via the request body is no longer needed.
By moving the followerIndex field from Body to ResumeFollowAction.Request
class and not allowing the followerIndex field to be specified via
the request body the Body class is redundant and can be removed. The
ResumeFollowAction.Request class can then directly use the
FollowParameters class.
For consistency I also removed the ability to specified followerIndex
in the put follow api and the name in put auto follow pattern api via
the request body.
* Adding apm_user
* Fixing SecurityDocumentationIT testGetRoles test
* Adding access to .ml-anomalies-*
* Fixing APM test, we don't have access to the ML state index
X-Pack security supports built-in authentication service
`token-service` that allows access tokens to be used to
access Elasticsearch without using Basic authentication.
The tokens are generated by `token-service` based on
OAuth2 spec. The access token is a short-lived token
(defaults to 20m) and refresh token with a lifetime of 24 hours,
making them unsuitable for long-lived or recurring tasks where
the system might go offline thereby failing refresh of tokens.
This commit introduces a built-in authentication service
`api-key-service` that adds support for long-lived tokens aka API
keys to access Elasticsearch. The `api-key-service` is consulted
after `token-service` in the authentication chain. By default,
if TLS is enabled then `api-key-service` is also enabled.
The service can be disabled using the configuration setting.
The API keys:-
- by default do not have an expiration but expiration can be
configured where the API keys need to be expired after a
certain amount of time.
- when generated will keep authentication information of the user that
generated them.
- can be defined with a role describing the privileges for accessing
Elasticsearch and will be limited by the role of the user that
generated them
- can be invalidated via invalidation API
- information can be retrieved via a get API
- that have been expired or invalidated will be retained for 1 week
before being deleted. The expired API keys remover task handles this.
Following are the API key management APIs:-
1. Create API Key - `PUT/POST /_security/api_key`
2. Get API key(s) - `GET /_security/api_key`
3. Invalidate API Key(s) `DELETE /_security/api_key`
The API keys can be used to access Elasticsearch using `Authorization`
header, where the auth scheme is `ApiKey` and the credentials, is the
base64 encoding of API key Id and API key separated by a colon.
Example:-
```
curl -H "Authorization: ApiKey YXBpLWtleS1pZDphcGkta2V5" http://localhost:9200/_cluster/health
```
Closes#34383
The HLRC client currently uses `org.elasticsearch.action.admin.indices.get.GetIndexRequest`
and `org.elasticsearch.action.admin.indices.get.GetIndexResponse` in its get index calls. Both request and
response are designed for the typed APIs, including some return types e.g. for `getMappings()` which in
the maps it returns still use a level including the type name.
In order to change this without breaking existing users of the HLRC API, this PR introduces two new request
and response objects in the `org.elasticsearch.client.indices` client package. These are used by the
IndicesClient#get and IndicesClient#exists calls now by default and support the type-less API. The old request
and response objects are still kept for use in similarly named, but deprecated methods.
The newly introduced client side classes are simplified versions of the server side request/response classes since
they don't need to support wire serialization, and only the response needs fromXContent parsing (but no
xContent-serialization, since this is the responsibility of the server-side class).
Also changing the return type of `GetIndexResponse#getMapping` to
`Map<String, MappingMetaData> getMappings()`, while it previously was returning another map
keyed by the type-name. Similar getters return simple Maps instead of the ImmutableOpenMaps that the
server side response objects return.
As mapping types are being removed throughout Elasticsearch, the use of
`_type` in pipeline simulation requests is deprecated. Additionally, the
default `_type` used if one is not supplied has been changed to `_doc` for
consistency with the rest of Elasticsearch.
IndexLifecycleExplainResponse did not allow unknown fields. This commit
fixes the test and ConstructingObjectParser such that it allows unknown
fields.
This commit deprecates the few methods that had their parameters
reordered to facilitate the move from EmptyResponse to boolean. This
commit also readds the boolean based methods with the proper
signatures.
Relates #37540
Relates #36938
Implements `geotile_grid` aggregation
This patch refactors previous implementation https://github.com/elastic/elasticsearch/pull/30240
This code uses the same base classes as `geohash_grid` agg, but uses a different hashing
algorithm to allow zoom consistency. Each grid bucket is aligned to Web Mercator tiles.
With #37566 we have introduced the ability to merge multiple search responses into one. That makes it possible to expose a new way of executing cross-cluster search requests, that makes CCS much faster whenever there is network latency between the CCS coordinating node and the remote clusters. The coordinating node can now send a single search request to each remote cluster, which gets reduced by each one of them. from + size results are requested to each cluster, and the reduce phase in each cluster is non final (meaning that buckets are not pruned and pipeline aggs are not executed). The CCS coordinating node performs an additional, final reduction, which produces one search response out of the multiple responses received from the different clusters.
This new execution path will be activated by default for any CCS request unless a scroll is provided or inner hits are requested as part of field collapsing. The search API accepts now a new parameter called ccs_minimize_roundtrips that allows to opt-out of the default behaviour.
Relates to #32125
The existing implementation was slow due to exceptions being thrown if
an accessor did not have a time zone. This implementation queries for
having a timezone, local time and local date and also checks for an
instant preventing to throw an exception and thus speeding up the conversion.
This removes the existing method and create a new one named
DateFormatters.from(TemporalAccessor accessor) to resemble the naming of
the java time ones.
Before this change an epoch millis parser using the toZonedDateTime
method took approximately 50x longer.
Relates #37826
* move watcher to seq# occ
* top level set
* fix parsing and missing setters
* share toXContent for PutResponse and rest end point
* fix redacted password
* fix username reference
* fix deactivate-watch.asciidoc have seq no references
* add seq# + term to activate-watch.asciidoc
* more doc fixes
This commit fixes the test case that ensures only a priority
less then 0 is used with testNonPositivePriority. This also
allows the HLRC to support a value of 0.
Closes#37652
Previously, ShrinkAction would fail if
it was executed on an index that had
the same number of shards as the target
shrunken number.
This PR introduced a new BranchingStep that
is used inside of ShrinkAction to branch which
step to move to next, depending on the
shard values. So no shrink will occur if the
shard count is unchanged.
A few of the ILM Lifecycle Policy and classes did not allow for unknown
fields. This commit sets those parsers and fixes the tests for the
parsers.
Relates #36938
The subparser in verify repository allows for unknown fields. This
commit sets the value to true for the parser and modifies the test such
that it accurately tests it.
Relates #36938
The LLRC's exception handling for strict mode was previously throwing an
exception the HLRC assumed was an error response. This is not the case
if the result is valid in strict mode, as it will return the proper
response wrapped in an exception with warnings. This commit fixes the
HLRC such that it no longer spews if it encounters a strict LLRC
response.
Closes#37090
Added deprecation warnings for use of include_type_name in put/get index templates.
HLRC changes:
GetIndexTemplateRequest has a new client-side class which is a copy of server's GetIndexTemplateResponse but modified to be typeless.
PutIndexTemplateRequest has a new client-side counterpart which doesn't use types in the mappings
Relates to #35190
This commit modifies the put follow index action to use a
CcrRepository when creating a follower index. It routes
the logic through the snapshot/restore process. A
wait_for_active_shards parameter can be used to configure
how long to wait before returning the response.
The update request has a lesser known support for a one off update of a known document version. This PR adds an a seq# based alternative to power these operations.
Relates #36148
Relates #10708
We inject an Unfollow action before Shrink because the Shrink action
cannot be safely used on a following index, as it may not be fully
caught up with the leader index before the "original" following index is
deleted and replaced with a non-following Shrunken index. The Unfollow
action will verify that 1) the index is marked as "complete", and 2) all
operations up to this point have been replicated from the leader to the
follower before explicitly disconnecting the follower from the leader.
Injecting an Unfollow action before the Rollover action is done mainly
as a convenience: This allow users to use the same lifecycle policy on
both the leader and follower cluster without having to explictly modify
the policy to unfollow the index, while doing what we expect users to
want in most cases.
From previous PRs, we've already added support for include_type_name to
the get mapping API. We had also taken an approach to the HLRC where the
server-side `GetMappingResponse#fromXContent` could only handle typeless
input.
This PR updates the HLRC for 'get mapping' to be in line with our new approach:
* Add a typeless 'get mappings' method to the Java HLRC, that accepts new
client-side request and response objects. This new response only handles
typeless mapping definitions.
* Switch the old version of `GetMappingResponse` back to expecting typed
mappings, and deprecate the corresponding method on the HLRC.
Finally, the PR also does some small, related clean-up around 'get field mappings'.
This commit introduces the `create_snapshot` cluster privilege and
the `snapshot_user` role.
This role is to be used by "cronable" tools that call the snapshot API
periodically without recurring to the `manage` cluster privilege. The
`create_snapshot` cluster privilege is much more limited compared to
the `manage` privilege.
The `snapshot_user` role grants the privileges to view the metadata of
all indices (including restricted ones, i.e. .security). It obviously grants the
create snapshot privilege but the repository has to be created using another
role. In addition, it grants the privileges to (only) GET repositories and
snapshots, but not create and delete them.
The role does not allow to create repositories. This distinction is important
because snapshotting equates to the `read` index privilege if the user has
control of the snapshot destination, but this is not the case in this instance,
because the role does not grant control over repository configuration.
* Remove empty statements
There are a couple of instances of undocumented empty statements all across the
code base. While they are mostly harmless, they make the code hard to read and
are potentially error-prone. Removing most of these instances and marking blocks
that look empty by intention as such.
* Change test, slightly more verbose but less confusing
From #29453 and #37285, the include_type_name parameter was already present and defaulted to false. This PR makes the following updates:
* Add deprecation warnings to RestCreateIndexAction, plus tests in RestCreateIndexActionTests.
* Add a typeless 'create index' method to the Java HLRC, and deprecate the old typed version. To do this cleanly, I created new CreateIndexRequest and CreateIndexResponse objects that differ from the existing server ones.
This change split out all the specific GeoHash
classes for the geohash_grid aggregation into
abstract GeoGrid classes that can be re-used for
specific hashing types, like `geohash`
AuthenticateResponse did not allow unknown fields. This commit fixes the
test and ConstructingObjectParser such that it does now allow unknown
fields.
Relates #36938
The EmptyResponse is essentially the same as returning a boolean, which
is done in other places. This commit deprecates all the existing
EmptyResponse methods and creates new boolean methods that have method
params reordered so they can exist with the deprecated methods. A
followup PR in master will remove the existing deprecated methods, fix
the parameter ordering and deprecate the incorrectly ordered parameter
methods.
Relates #36938
- Add deprecation warning to RestGetFieldMappingAction
- Add two new java HRLC classes GetFieldMappingsRequest and
GetFieldMappingsResponse. These classes use new typeless forms
of a request and response, and differ in that from the server
versions.
Relates to #35190
With this commit we limit the update settings request to the index that
is used in `IndicesClientIT#testIndexPutSettings()`. This avoids
spurious exceptions involving other indices that might also be present
in the test cluster.
Closes#36931
Relates #37338
The recently introduced client side PutMappingRequestTests has an edge case that
leads to failing tests. When the "source" or the original request is `null` it
gets rendered to xContent as an empty object, which by the test class itself is
parsed back as an empty map. For this reason the original and the parsed request
differ (one has an empty source, one an empty map). This fixes this edge case by
assuming an empty map means a null source in the request. In practice the
distinction doesn't matter because all the client side request does is write
itself to xContent, which gives the same result regardless of whether `source`
is null or empty.
Closes#37654
This grants the capability to grant privileges over certain restricted
indices (.security and .security-6 at the moment).
It also removes the special status of the superuser role.
IndicesPermission.Group is extended by adding the `allow_restricted_indices`
boolean flag. By default the flag is false. When it is toggled, you acknowledge
that the indices under the scope of the permission group can cover the
restricted indices as well. Otherwise, by default, restricted indices are ignored
when granting privileges, thus rendering them hidden for authorization purposes.
This effectively adds a confirmation "check-box" for roles that might grant
privileges to restricted indices.
The "special status" of the superuser role has been removed and coded as
any other role:
```
new RoleDescriptor("superuser",
new String[] { "all" },
new RoleDescriptor.IndicesPrivileges[] {
RoleDescriptor.IndicesPrivileges.builder()
.indices("*")
.privileges("all")
.allowRestrictedIndices(true)
// this ----^
.build() },
new RoleDescriptor.ApplicationResourcePrivileges[] {
RoleDescriptor.ApplicationResourcePrivileges.builder()
.application("*")
.privileges("*")
.resources("*")
.build()
},
null, new String[] { "*" },
MetadataUtils.DEFAULT_RESERVED_METADATA,
Collections.emptyMap());
```
In the context of the Backup .security work, this allows the creation of a
"curator role" that would permit listing (get settings) for all indices
(including the restricted ones). That way the curator role would be able to
ist and snapshot all indices, but not read or restore any of them.
Supersedes #36765
Relates #34454
The subparser in get users allows for unknown fields. This commit sets
the value to true for the parser and modifies the test such that it
accurately tests it.
Relates #36938
From #29453 and #37285, the `include_type_name` parameter was already present and defaulted to false. This PR makes the following updates:
- Add deprecation warnings to `RestPutMappingAction`, plus tests in `RestPutMappingActionTests`.
- Add a typeless 'put mappings' method to the Java HLRC, and deprecate the old typed version. To do this cleanly, I opted to create a new `PutMappingRequest` object that differs from the existing server one.
This change adds the unfollow action for CCR follower indices.
This is needed for the shrink action in case an index is a follower index.
This will give the follower index the opportunity to fully catch up with
the leader index, pause index following and unfollow the leader index.
After this the shrink action can safely perform the ilm shrink.
The unfollow action needs to be added to the hot phase and acts as
barrier for going to the next phase (warm or delete phases), so that
follower indices are being unfollowed properly before indices are expected
to go in read-only mode. This allows the force merge action to execute
its steps safely.
The unfollow action has three steps:
* `wait-for-indexing-complete` step: waits for the index in question
to get the `index.lifecycle.indexing_complete` setting be set to `true`
* `wait-for-follow-shard-tasks` step: waits for all the shard follow tasks
for the index being handled to report that the leader shard global checkpoint
is equal to the follower shard global checkpoint.
* `pause-follower-index` step: Pauses index following, necessary to unfollow
* `close-follower-index` step: Closes the index, necessary to unfollow
* `unfollow-follower-index` step: Actually unfollows the index using
the CCR Unfollow API
* `open-follower-index` step: Reopens the index now that it is a normal index
* `wait-for-yellow` step: Waits for primary shards to be allocated after
reopening the index to ensure the index is ready for the next step
In the case of the last two steps, if the index in being handled is
a regular index then the steps acts as a no-op.
Relates to #34648
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Gordon Brown <gordon.brown@elastic.co>
ExecuteWatchResponse did not allow unknown fields. This commit fixes the
test and ConstructingObjectParser such that it does now allow unknown
fields. It also creates a new client side test for the response.
Relates #36938
This change adds deprecation warning to the indices.get_mapping API in case the
"inlcude_type_name" parameter is set to "true" and changes the parsing code in
GetMappingsResponse to parse the type-less response instead of the one
containing types. As a consequence the HLRC client doesn't need to force
"include_type_name=true" any more and the GetMappingsResponseTests can be
adapted to the new format as well. Also removing some "include_type_name"
parameters in yaml test and docs where not necessary.
This commit adds a set_priority action to the hot, warm, and cold
phases for an ILM policy. This action sets the `index.priority`
on the managed index to allow different priorities between the
hot, warm, and cold recoveries.
This commit also includes the HLRC and documentation changes.
closes#36905
PutWatchResponse did not allow unknown fields. This commit fixes the
test and ConstructingObjectParser such that it does now allow unknown
fields.
Relates #36938
DeleteWatchResponse did not allow unknown fields. This commit fixes the
test and ConstructingObjectParser such that it does now allow unknown
fields.
Relates #36938
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
This commit removes the fallback for SSL settings. While this may be
seen as a non user friendly change, the intention behind this change
is to simplify the reasoning needed to understand what is actually
being used for a given SSL configuration. Each configuration now needs
to be explicitly specified as there is no global configuration or
fallback to some other configuration.
Closes#29797
Update the scroll example ascii and Java docs, so it is more clear when to
consume the scroll documents. Before this change the user could loose
the first results if one uses copy & paste.
This change ensures that TasksIT#testGetValidTask and ReindexIT#testReindexTask
don't leave a non-completed task on the cluster when they finish.
Closes#35644
Added warnings checks to existing tests
Added “defaultTypeIfNull” to DocWriteRequest interface so that Bulk requests can override a null choice of document type with any global custom choice.
Related to #35190
This change adds support for the 'include_type_name' parameter for the
indices.get API. This parameter, which defaults to `false` starting in 7.0,
changes the response to not include the indices type names any longer.
If the parameter is set in the request, we additionally emit a deprecation
warning since using the parameter should be only temporarily necessary while
adapting to the new response format and we will remove it with the next major
version.
Previously the HLRC used a blocking ByteArrayEntity, but the Request
class also allows to set a NByteArrayEntity, and defaults to nonblocking
when calling the createJsonEntity method. This commit cleans up all the
uses of ByteArrayEntity in the RequestConverters to use the nonblocking
entity.
The query object was incorrectly added to the remote object in the
xcontent. This fix moves the query back into the source, if it was
passed in as part of the RemoteInfo. It also adds a IPv6 test for
reindex from remote such that we can properly validate this.
Types can be used both in the source and dest section of the body which will
be translated to search and index requests respectively. Adding a deprecation warning
for those cases and removing examples using more than one type in reindex since
support for this is going to be removed.
- Removes bwc invalidation logic from the TokenService
- Removes bwc serialization for InvalidateTokenResponse objects as
old nodes in supported mixed clusters during upgrade will be 6.7 and
thus will know of the new format
- Removes the created field from the TokensInvalidationResult and the
InvalidateTokenResponse as it is no longer useful in > 7.0
Currently auto follow stats users are unable to see whether an auto follow
error was recent or old. The new timestamp field will help user distinguish
between old and new errors.
* [ML] Job and datafeed mappings with index template (#32719)
Index mappings for the configuration documents
* [ML] Job config document CRUD operations (#32738)
* [ML] Datafeed config CRUD operations (#32854)
* [ML] Change JobManager to work with Job config in index (#33064)
* [ML] Change Datafeed actions to read config from the config index (#33273)
* [ML] Allocate jobs based on JobParams rather than cluster state config (#33994)
* [ML] Return missing job error when .ml-config is does not exist (#34177)
* [ML] Close job in index (#34217)
* [ML] Adjust finalize job action to work with documents (#34226)
* [ML] Job in index: Datafeed node selector (#34218)
* [ML] Job in Index: Stop and preview datafeed (#34605)
* [ML] Delete job document (#34595)
* [ML] Convert job data remover to work with index configs (#34532)
* [ML] Job in index: Get datafeed and job stats from index (#34645)
* [ML] Job in Index: Convert get calendar events to index docs (#34710)
* [ML] Job in index: delete filter action (#34642)
This changes the delete filter action to search
for jobs using the filter to be deleted in the index
rather than the cluster state.
* [ML] Job in Index: Enable integ tests (#34851)
Enables the ml integration tests excluding the rolling upgrade tests and a lot of fixes to
make the tests pass again.
* [ML] Reimplement established model memory (#35500)
This is the 7.0 implementation of a master node service to
keep track of the native process memory requirement of each ML
job with an associated native process.
The new ML memory tracker service works when the whole cluster
is upgraded to at least version 6.6. For mixed version clusters
the old mechanism of established model memory stored on the job
in cluster state was used. This means that the old (and complex)
code to keep established model memory up to date on the job object
has been removed in 7.0.
Forward port of #35263
* [ML] Need to wait for shards to replicate in distributed test (#35541)
Because the cluster was expanded from 1 node to 3 indices would
initially start off with 0 replicas. If the original node was
killed before auto-expansion to 1 replica was complete then
the test would fail because the indices would be unavailable.
* [ML] DelayedDataCheckConfig index mappings (#35646)
* [ML] JIndex: Restore finalize job action (#35939)
* [ML] Replace Version.CURRENT in streaming functions (#36118)
* [ML] Use 'anomaly-detector' in job config doc name (#36254)
* [ML] Job In Index: Migrate config from the clusterstate (#35834)
Migrate ML configuration from clusterstate to index for closed jobs
only once all nodes are v6.6.0 or higher
* [ML] Check groups against job Ids on update (#36317)
* [ML] Adapt to periodic persistent task refresh (#36633)
* [ML] Adapt to periodic persistent task refresh
If https://github.com/elastic/elasticsearch/pull/36069/files is
merged then the approach for reallocating ML persistent tasks
after refreshing job memory requirements can be simplified.
This change begins the simplification process.
* Remove AwaitsFix and implement TODO
* [ML] Default search size for configs
* Fix TooManyJobsIT.testMultipleNodes
Two problems:
1. Stack overflow during async iteration when lots of
jobs on same machine
2. Not effectively setting search size in all cases
* Use execute() instead of submit() in MlMemoryTracker
We don't need a Future to wait for completion
* [ML][TEST] Fix NPE in JobManagerTests
* [ML] JIindex: Limit the size of bulk migrations (#36481)
* [ML] Prevent updates and upgrade tests (#36649)
* [FEATURE][ML] Add cluster setting that enables/disables config migration (#36700)
This commit adds a cluster settings called `xpack.ml.enable_config_migration`.
The setting is `true` by default. When set to `false`, no config migration will
be attempted and non-migrated resources (e.g. jobs, datafeeds) will be able
to be updated normally.
Relates #32905
* [ML] Snapshot ml configs before migrating (#36645)
* [FEATURE][ML] Split in batches and migrate all jobs and datafeeds (#36716)
Relates #32905
* SQL: Fix translation of LIKE/RLIKE keywords (#36672)
* SQL: Fix translation of LIKE/RLIKE keywords
Refactor Like/RLike functions to simplify internals and improve query
translation when chained or within a script context.
Fix#36039Fix#36584
* Fixing line length for EnvironmentTests and RecoveryTests (#36657)
Relates #34884
* Add back one line removed by mistake regarding java version check and
COMPAT jvm parameter existence
* Do not resolve addresses in remote connection info (#36671)
The remote connection info API leads to resolving addresses of seed
nodes when invoked. This is problematic because if a hostname fails to
resolve, we would not display any remote connection info. Yet, a
hostname not resolving can happen across remote clusters, especially in
the modern world of cloud services with dynamically chaning
IPs. Instead, the remote connection info API should be providing the
configured seed nodes. This commit changes the remote connection info to
display the configured seed nodes, avoiding a hostname resolution. Note
that care was taken to preserve backwards compatibility with previous
versions that expect the remote connection info to serialize a transport
address instead of a string representing the hostname.
* [Painless] Add boxed type to boxed type casts for method/return (#36571)
This adds implicit boxed type to boxed types casts for non-def types to create asymmetric casting relative to the def type when calling methods or returning values. This means that a user calling a method taking an Integer can call it with a Byte, Short, etc. legally which matches the way def works. This creates consistency in the casting model that did not previously exist.
* SNAPSHOTS: Adjust BwC Versions in Restore Logic (#36718)
* Re-enables bwc tests with adjusted version conditions now that #36397 enables concurrent snapshots in 6.6+
* ingest: fix on_failure with Drop processor (#36686)
This commit allows a document to be dropped when a Drop processor
is used in the on_failure fork of the processor chain.
Fixes#36151
* Initialize startup `CcrRepositories` (#36730)
Currently, the CcrRepositoryManger only listens for settings updates
and installs new repositories. It does not install the repositories that
are in the initial settings. This commit, modifies the manager to
install the initial repositories. Additionally, it modifies the ccr
integration test to configure the remote leader node at startup, instead
of using a settings update.
* [TEST] fix float comparison in RandomObjects#getExpectedParsedValue
This commit fixes a test bug introduced with #36597. This caused some
test failure as stored field values comparisons would not work when CBOR
xcontent type was used.
Closes#29080
* [Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)
This commit exposes lucene's LatLonShape field as the
default type in GeoShapeFieldMapper. To use the new
indexing approach, simply set "type" : "geo_shape" in
the mappings without setting any of the strategy, precision,
tree_levels, or distance_error_pct parameters. Note the
following when using the new indexing approach:
* geo_shape query does not support querying by
MULTIPOINT.
* LINESTRING and MULTILINESTRING queries do not
yet support WITHIN relation.
* CONTAINS relation is not yet supported.
The tree, precision, tree_levels, distance_error_pct,
and points_only parameters are deprecated.
* TESTS:Debug Log. IndexStatsIT#testFilterCacheStats
* ingest: support default pipelines + bulk upserts (#36618)
This commit adds support to enable bulk upserts to use an index's
default pipeline. Bulk upsert, doc_as_upsert, and script_as_upsert
are all supported.
However, bulk script_as_upsert has slightly surprising behavior since
the pipeline is executed _before_ the script is evaluated. This means
that the pipeline only has access the data found in the upsert field
of the script_as_upsert. The non-bulk script_as_upsert (existing behavior)
runs the pipeline _after_ the script is executed. This commit
does _not_ attempt to consolidate the bulk and non-bulk behavior for
script_as_upsert.
This commit also adds additional testing for the non-bulk behavior,
which remains unchanged with this commit.
fixes#36219
* Fix duplicate phrase in shrink/split error message (#36734)
This commit removes a duplicate "must be a" from the shrink/split error
messages.
* Deprecate types in get_source and exist_source (#36426)
This change adds a new untyped endpoint `{index}/_source/{id}` for both the
GET and the HEAD methods to get the source of a document or check for its
existance. It also adds deprecation warnings to RestGetSourceAction that emit
a warning when the old deprecated "type" parameter is still used. Also updating
documentation and tests where appropriate.
Relates to #35190
* Revert "[Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)"
This reverts commit 5bc7822562.
* Enhance Invalidate Token API (#35388)
This change:
- Adds functionality to invalidate all (refresh+access) tokens for all users of a realm
- Adds functionality to invalidate all (refresh+access)tokens for a user in all realms
- Adds functionality to invalidate all (refresh+access) tokens for a user in a specific realm
- Changes the response format for the invalidate token API to contain information about the
number of the invalidated tokens and possible errors that were encountered.
- Updates the API Documentation
After back-porting to 6.x, the `created` field will be removed from master as a field in the
response
Resolves: #35115
Relates: #34556
* Add raw sort values to SearchSortValues transport serialization (#36617)
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of each `SearchHit`. Sort values are already present but they are formatted according to the provided `DocValueFormat` provided. The CCS node needs to be able to reconstruct the lucene `FieldDoc` to include in the `TopFieldDocs` and `CollapseTopFieldDocs` which will feed the `mergeTopDocs` method used to reduce multiple search responses (one per cluster) into one.
This commit adds such information to the `SearchSortValues` and exposes it through a new getter method added to `SearchHit` for retrieval. This info is only serialized at transport and never printed out at REST.
* Watcher: Ensure all internal search requests count hits (#36697)
In previous commits only the stored toXContent version of a search
request was using the old format. However an executed search request was
already disabling hit counts. In 7.0 hit counts will stay enabled by
default to allow for proper migration.
Closes#36177
* [TEST] Ensure shard follow tasks have really stopped.
Relates to #36696
* Ensure MapperService#getAllMetaFields elements order is deterministic (#36739)
MapperService#getAllMetaFields returns an array, which is created out of
an `ObjectHashSet`. Such set does not guarantee deterministic hash
ordering. The array returned by its toArray may be sorted differently
at each run. This caused some repeatability issues in our tests (see #29080)
as we pick random fields from the array of possible metadata fields,
but that won't be repeatable if the input array is sorted differently at
every run. Once setting the tests seed, hppc picks that up and the sorting is
deterministic, but failures don't repeat with the seed that gets printed out
originally (as a seed was not originally set).
See also https://issues.carrot2.org/projects/HPPC/issues/HPPC-173.
With this commit, we simply create a static sorted array that is used for
`getAllMetaFields`. The change is in production code but really affects
only testing as the only production usage of this method was to iterate
through all values when parsing fields in the high-level REST client code.
Anyways, this seems like a good change as returning an array would imply
that it's deterministically sorted.
* Expose Sequence Number based Optimistic Concurrency Control in the rest layer (#36721)
Relates #36148
Relates #10708
* [ML] Mute MlDistributedFailureIT
* Deprecate types in index API
- deprecate type-based constructors of IndexRequest
- update tests to use typeless IndexRequest constructors
- no yaml tests as they have been already added in #35790
Relates to #35190
This change:
- Adds functionality to invalidate all (refresh+access) tokens for all users of a realm
- Adds functionality to invalidate all (refresh+access)tokens for a user in all realms
- Adds functionality to invalidate all (refresh+access) tokens for a user in a specific realm
- Changes the response format for the invalidate token API to contain information about the
number of the invalidated tokens and possible errors that were encountered.
- Updates the API Documentation
After back-porting to 6.x, the `created` field will be removed from master as a field in the
response
Resolves: #35115
Relates: #34556
This change adds a new untyped endpoint `{index}/_source/{id}` for both the
GET and the HEAD methods to get the source of a document or check for its
existance. It also adds deprecation warnings to RestGetSourceAction that emit
a warning when the old deprecated "type" parameter is still used. Also updating
documentation and tests where appropriate.
Relates to #35190
For each remote cluster the auto follow coordinator, starts an auto
follower that checks the remote cluster state and determines whether an
index needs to be auto followed. The time since last auto follow is
reported per remote cluster and gives insight whether the auto follow
process is alive.
Relates to #33007
Originates from #35895
The following updates were made:
* Add deprecation warnings to `RestUpdateAction`, plus a test in `RestUpdateActionTests`.
* Deprecate relevant methods on the Java HLRC requests/ responses.
* Add HLRC integration tests for the typed APIs.
* Update documentation (for both the REST API and Java HLRC).
* Fix failing integration tests.
Because of an earlier PR, the REST yml tests were already updated (one version without types, and another legacy version that retains types).
this test was failing because of two reason
- it was creating invalid users with passwords shorter than 6 characters
- it was expecting 7 total users to be returned, but it should be 9
* add read_ilm cluster privilege
Although managing ILM policies is best done using the
"manage" cluster privilege, it is useful to have read-only
views.
* adds `read_ilm` cluster privilege for viewing policies and status
* adds Explain API to the `view_index_metadata` index privilege
* add manage_ilm privileges
The security documentation test uses
SecureRandom#getStrongInstance. This defaults to
securerandom.strongAlgorithms=NativePRNGBlocking:SUN,DRBG:SUN which
means a blocking implementation that reads from /dev/random. This means
that this test can stall if the entropy on the machine is
exhausted. Anyway, it also means that the randomness is
non-reproducible, a thing that we try to avoid in tests. This commit
switches to a boring randomness source to avoid the blocking, and to
keep the test reproducible.
* Make sure to test conversion for both typed and typeless HLRC requests.
* Update a few more statements to deprecatedAndMaybeLog.
* Make sure Rest*SearchTemplateActionTests extend RestActionTestCase.
Przemysław Witek
Gordon Brown
Stuart Tettemer
Benjamin Trent
Martijn van Groningen
David Roberts
Tanguy Leroux
Yogesh Gaikwad
Hendrik Muhs
Tim Brooks
Dimitris Athanasiou
Alpar Torok
Lee Hinman
Yannick Welsch
Rory Hunter
maidoo
Lisa Cawley
Andrei Dan
James Rodewig
Turaç Kangal
Henning Andersen
Luca Cavanna
Jilles van Gurp
Albert Zaharovits
markharwood
Armin Braun
Denis Derezhenets
Michael Basnight
Jim Ferenczi
Jason Tedor
David Turner
James Baiera
Ryan Ernst
Tal Levy
Christoph Büscher
Tim Vernum
Ryan Ernst
Mark Vieira
Alan Woodward
Przemyslaw Gomulka
kevin fuksman
Guillaume Darmont
Ioannis Kakavas
David Kyle
Zachary Tong
Ed Savage
Jim Ferenczi
Ed Savage
roy
Adrien Grand
Andy Bristol
Jack Conradson
Ioannis Kakavas
Paul Sanwald
Boaz Leskes
Julie Tibshirani
Brandon Kobel
Mayya Sharipova
Zachary Tong
Yuri Astrakhan
Alexander Reelsen
Jake Landis
Albert Zaharovits
Yulong
Daniel Mitterdorfer
Jay Modi
Georgi Ivanov
David Findley
Nicholas Knize