Commit Graph

21 Commits

Author SHA1 Message Date
Zachary Tong ebed8f2618 [Rollup] Fix FullClusterRestart test
We need to wait for the job to fully initialize and start before
we can attempt to stop it.  If we don't, it's possible for the stop
API to be called before the persistent task is fully loaded and it'll
throw an exception.

Closes #32773
2018-08-31 18:44:42 -04:00
Nik Everett 2c81d7f77e
Build: Rework shadow plugin configuration (#32409)
This reworks how we configure the `shadow` plugin in the build. The major
change is that we no longer bundle dependencies in the `compile` configuration,
instead we bundle dependencies in the new `bundle` configuration. This feels
more right because it is a little more "opt in" rather than "opt out" and the
name of the `bundle` configuration is a little more obvious.

As an neat side effect of this, the `runtimeElements` configuration used when
one project depends on another now contains exactly the dependencies needed
to run the project so you no longer need to reference projects that use the
shadow plugin like this:

```
testCompile project(path: ':client:rest-high-level', configuration: 'shadow')
```

You can instead use the much more normal:

```
testCompile "org.elasticsearch.client:elasticsearch-rest-high-level-client:${version}"
```
2018-08-21 20:03:28 -04:00
Ioannis Kakavas e3aa68b0a9
[TEST] Run pre 6.4 nodes in non-FIPS JVMs (#32901)
Elasticsearch versions earlier than 6.4.0 cannot properly run in a
FIPS 140 JVM. This commit ensures that we use a non-FIPS JVM for
nodes that we spin up in BWC tests even when we're testing FIPS.
2018-08-17 18:23:13 +03:00
Adrien Grand eaaf37a1f9 AwaitFix FullClusterRestartIT#testRollupIDSchemeAfterRestart. 2018-08-16 16:35:10 +02:00
Zachary Tong 4da0b52a19
[TEST] Force a stop to save rollup state before continuing (#32787)
We only upgrade the ID when the state is saved in one of four scenarios:

- when we reach a checkpoint (every 50 pages)
- when we run out of data
- when explicitly stopped
- on failure

The test was relying on the pre-upgrade to finish, save state and then
the post-upgrade to start, hit the end of data and upgrade ID.  THEN
get the new doc and apply the new ID.

But I think this is vulnerable to timing issues. If the pre-upgrade
portion shutdown before it saved the state, when restarting we would run
through all the data from the beginning with the old ID, meaning both
docs would still have the old scheme.

This change makes the pre-upgrade wait for the job to go back to STARTED
so that we know it persisted the end point.  Post-upgrade, it stops and
restarts the job to ensure the state was persisted and the ID upgraded.

That _should_ rule out the above timing issue.

Closes #32773
2018-08-13 12:53:22 -04:00
Alpar Torok c5e66cb345 mute test #32737 2018-08-09 21:54:58 +03:00
Zachary Tong 992ec4be5d [Rollup] Update wire version check after backport
Bumping down the version to 6.4 since the backport is complete.  Also
adds some missing version checks to the bwc tests to make sure it
only runs on the correct versions
2018-08-03 14:09:01 -04:00
Zachary Tong fc9fb64ad5
[Rollup] Improve ID scheme for rollup documents (#32558)
Previously, we were using a simple CRC32 for the IDs of rollup documents.
This is a very poor choice however, since 32bit IDs leads to collisions
between documents very quickly.

This commit moves Rollups over to a 128bit ID.  The ID is a concatenation
of all the keys in the document (similar to the rolling CRC before),
hashed with 128bit Murmur3, then base64 encoded.  Finally, the job
ID and a delimiter (`$`) are prepended to the ID.

This gurantees that there are 128bits per-job.  128bits should
essentially remove all chances of collisions, and the prepended
job ID means that _if_ there is a collision, it stays "within"
the job.

BWC notes:

We can only upgrade the ID scheme after we know there has been a good
checkpoint during indexing.  We don't rely on a STARTED/STOPPED
status since we can't guarantee that resulted from a real checkpoint,
or other state.  So we only upgrade the ID after we have reached
a checkpoint state during an active index run, and only after the
checkpoint has been confirmed.

Once a job has been upgraded and checkpointed, the version increments
and the new ID is used in the future.  All new jobs use the
new ID from the start
2018-08-03 11:13:25 -04:00
Nik Everett 11a2189c6f
Switch x-pack full restart to new style Requests (#32294)
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack:qa:full-cluster-restart` project to use
the new versions.
2018-07-26 12:11:31 -04:00
Nik Everett e6b9f59e4e
Build: Shadow x-pack:protocol into x-pack:plugin:core (#32240)
This bundles the x-pack:protocol project into the x-pack:plugin:core
project because we'd like folks to consider it an implementation detail
of our build rather than a separate artifact to be managed and depended
on. It is now bundled into both x-pack:plugin:core and
client:rest-high-level. To make this work I had to fix a few things.

Firstly, I had to make PluginBuildPlugin work with the shadow plugin.
In that case we have to bundle only the `shadow` dependencies and the
shadow jar.

Secondly, every reference to x-pack:plugin:core has to use the `shadow`
configuration. Without that the reference is missing all of the
un-shadowed dependencies. I tried to make it so that applying the shadow
plugin automatically redefines the `default` configuration to mirror the
`shadow` configuration which would allow us to use bare project references
to the x-pack:plugin:core project but I couldn't make it work. It'd *look*
like it works but then fail for transitive dependencies anyway. I think
it is still a good thing to do but I don't have the willpower to do it
now.

Finally, I had to fix an issue where Eclipse and IntelliJ didn't properly
reference shadowed transitive dependencies. Neither IDE supports shadowing
natively so they have to reference the shadowed projects. We fix this by
detecting `shadow` dependencies when in "Intellij mode" or "Eclipse mode"
and adding `runtime` dependencies to the same target. This convinces
IntelliJ and Eclipse to play nice.
2018-07-24 11:53:04 -04:00
Ioannis Kakavas a2dbd83db1
Allow Integ Tests to run in a FIPS-140 JVM (#31989)
* Complete changes for running IT in a fips JVM

- Mute :x-pack:qa:sql:security:ssl:integTest as it
  cannot run in FIPS 140 JVM until the SQL CLI supports key/cert.
- Set default JVM keystore/truststore password in top level build
  script for all integTest tasks in a FIPS 140 JVM
- Changed top level x-pack build script to use keys and certificates
  for trust/key material when spinning up clusters for IT
2018-07-24 12:48:14 +03:00
Zachary Tong b7f07f03ed
[Rollup] Use composite's missing_bucket (#31402)
We can leverage the composite agg's new `missing_bucket` feature on
terms groupings.  This means the aggregation criteria used in the indexer
will now return null buckets for missing keys.  

Because all buckets are now returned (even if a key is null),
we can guarantee correct doc counts with
"combined" jobs (where a job rolls up multiple schemas).  This was
previously impossible since composite would ignore documents that
didn't have _all_ the keys, meaning non-overlapping schemas would
cause composite to return no buckets.

Note: date_histo does not use `missing_bucket`, since a timestamp is
always required.

The docs have been adjusted to recommend a single, combined job.  It
also makes reference to the previous issue to help users that are upgrading
(rather than just deleting the sections).
2018-07-13 10:07:42 -04:00
Nik Everett d0c276c456
QA: Merge query-builder-bwc to restart test (#30979)
Merges the `query-builder-bwc` qa project into the
`full-cluster-restart` qa project, saving a cluster starts on every
build and *many* cluster starts on `./gradlew bwcTests`.
2018-06-27 16:37:04 -04:00
Tanguy Leroux be9292cac6
[Test] Add full cluster restart test for Rollup (#31533)
This pull request adds a full cluster restart test for a Rollup job. 
The test creates and starts a Rollup job on the cluster and checks 
that the job already exists and is correctly started on the upgraded 
cluster.

This test allows to test that the persistent task state is correctly 
parsed from the cluster state after the upgrade, as the status field 
has been renamed to state in #31031.

The test undercovers a ClassCastException that can be thrown in 
the RollupIndexer when the timestamp as a very low value that fits 
into an integer. When it's the case, the value is parsed back as an 
Integer instead of Long object and (long) position.get(rollupFieldName) 
fails.
2018-06-26 10:07:25 +02:00
Tanguy Leroux bf58660482
Remove all unused imports and fix CRLF (#31207)
The X-Pack opening and the recent other refactorings left a lot of 
unused imports in the codebase. This commit removes them all.
2018-06-11 15:12:12 +02:00
Ryan Ernst be8c094e8c
Build: Add mavenPlugin cluster configuration method (#30541)
This commit adds the ability to specify a plugin from maven for a
test cluster to use. Currently, only local projects may be used as
plugins, except when testing bwc, where the coordinates of the project
are used. However, that assumes all projects always keep the same
coordinates, or are even still plugins, which is no longer the case for
x-pack. The full cluster and rolling restart tests are changed to use
this new method when pulling x-pack versions before 6.3.0.
2018-05-11 21:58:18 -07:00
Ryan Ernst ce008c446b
Security: Rename IndexLifecycleManager to SecurityIndexManager (#30442)
This commit renames IndexLifecycleManager to SecurityIndexManager as it
is not actually a general purpose class, but specific to security. It
also removes indirection in code calling the lifecycle service, instead
calling the security index manager directly.
2018-05-08 10:03:11 -07:00
Ryan Ernst 55e1b1e8b5
Tests: Use buildDir as base for generated-resources (#30191)
This commit moves the generated-resources directory created by many qa
projects into the build directory, so it is not seen as unknown files to
git.
2018-04-26 15:36:14 -07:00
Jason Tedor c7c0e330b8 Rename users
This commit renames users to elasticsearch-users.
2018-04-20 15:34:01 -07:00
Ryan Ernst fab5e21e7d Build: Split distributions into oss and default
This commit makes x-pack a module and adds it to the default
distrubtion. It also creates distributions for zip, tar, deb and rpm
which contain only oss code.
2018-04-20 15:33:57 -07:00
Ryan Ernst 2efd22454a Migrate x-pack-elasticsearch source to elasticsearch 2018-04-20 15:29:54 -07:00