This change contains a major refactoring of the timestamp
format determination code used by the ML find file structure
endpoint.
Previously timestamp format determination was done separately
for each piece of text supplied to the timestamp format finder.
This had the drawback that it was not possible to distinguish
dd/MM and MM/dd in the case where both numbers were 12 or less.
In order to do this sensibly it is best to look across all the
available timestamps and see if one of the numbers is greater
than 12 in any of them. This necessitates making the timestamp
format finder an instantiable class that can accumulate evidence
over time.
Another problem with the previous approach was that it was only
possible to override the timestamp format to one of a limited
set of timestamp formats. There was no way out if a file to be
analysed had a timestamp that was sane yet not in the supported
set. This is now changed to allow any timestamp format that can
be parsed by a combination of these Java date/time formats:
yy, yyyy, M, MM, MMM, MMMM, d, dd, EEE, EEEE, H, HH, h, mm, ss,
a, XX, XXX, zzz
Additionally S letter groups (fractional seconds) are supported
providing they occur after ss and separated from the ss by a dot,
comma or colon. Spacing and punctuation is also permitted with
the exception of the question mark, newline and carriage return
characters, together with literal text enclosed in single quotes.
The full list of changes/improvements in this refactor is:
- Make TimestampFormatFinder an instantiable class
- Overrides must be specified in Java date/time format - Joda
format is no longer accepted
- Joda timestamp formats in outputs are now derived from the
determined or overridden Java timestamp formats, not stored
separately
- Functionality for determining the "best" timestamp format in
a set of lines has been moved from TextLogFileStructureFinder
to TimestampFormatFinder, taking advantage of the fact that
TimestampFormatFinder is now an instantiable class with state
- The functionality to quickly rule out some possible Grok
patterns when looking for timestamp formats has been changed
from using simple regular expressions to the much faster
approach of using the Shift-And method of sub-string search,
but using an "alphabet" consisting of just 1 (representing any
digit) and 0 (representing non-digits)
- Timestamp format overrides are now much more flexible
- Timestamp format overrides that do not correspond to a built-in
Grok pattern are mapped to a %{CUSTOM_TIMESTAMP} Grok pattern
whose definition is included within the date processor in the
ingest pipeline
- Grok patterns that correspond to multiple Java date/time
patterns are now handled better - the Grok pattern is accepted
as matching broadly, and the required set of Java date/time
patterns is built up considering all observed samples
- As a result of the more flexible acceptance of Grok patterns,
when looking for the "best" timestamp in a set of lines
timestamps are considered different if they are preceded by
a different sequence of punctuation characters (to prevent
timestamps far into some lines being considered similar to
timestamps near the beginning of other lines)
- Out-of-the-box Grok patterns that are considered now include
%{DATE} and %{DATESTAMP}, which have indeterminate day/month
ordering
- The order of day/month in formats with indeterminate day/month
order is determined by considering all observed samples (plus
the server locale if the observed samples still do not suggest
an ordering)
Relates #38086Closes#35137Closes#35132
As part of #30241 realm settings were changed to be true affix
settings. In the process of this change, the "ssl." prefix was lost
from the realm truststore password. It should be:
xpack.security.authc.realms.<type>.<name>.ssl.truststore.password
Due to a mismatch between the way we define SSL settings and load SSL
contexts, there was no way to define this legacy password setting in a
realm config.
The settings validation would reject "ssl.truststore.password" but the
SSL service would ignore "truststore.password"
Backport of: #42336
This commit makes creators of GetField split the fields into document fields and metadata fields. It is part of larger refactoring that aims to remove the calls to static methods of MapperService related to metadata fields, as discussed in #24422.
Allow querying of FROZEN indices both through dedicated SQL grammar
extension:
> SELECT field FROM FROZEN index
and also through driver configuration parameter, namely:
> index.include.frozen: true/false
Fix#39390Fix#39377
(cherry picked from commit 2445a933915f420c7f51e8505afa0a7978ce6b0f)
When asserting on the checkpoint value if the DF has completed the checkpoint will be 1 else 0.
Similarly state may be started or indexing. Closes#42309
ShardId already implements Writeable so there is no need for it to implement Streamable too. Also the readShardId static method can be
easily replaced with direct usages of the constructor that takes a
StreamInput as argument.
* Remove IndexShard dependency from Repository
In order to simplify repository testing especially for BlobStoreRepository
it's important to remove the dependency on IndexShard and reduce it to
Store and MapperService (in the snapshot case). This significantly reduces
the dependcy footprint for Repository and allows unittesting without starting
nodes or instantiate entire shard instances. This change deprecates the old
method signatures and adds a unittest for FileRepository to show the advantage
of this change.
In addition, the unittesting surfaced a bug where the internal file names that
are private to the repository were used in the recovery stats instead of the
target file names which makes it impossible to relate to the actual lucene files
in the recovery stats.
* don't delegate deprecated methods
* apply comments
* test
rp.client_secret is a required secure setting. Make sure we fail with
a SettingsException and a clear, actionable message when building
the realm, if the setting is missing.
Enhance the handling of merging the claims sets of the
ID Token and the UserInfo response. JsonObject#merge would throw a
runtime exception when attempting to merge two objects with the
same key and different values. This could happen for an OP that
returns different vales for the same claim in the ID Token and the
UserInfo response ( Google does that for profile claim ).
If a claim is contained in both sets, we attempt to merge the
values if they are objects or arrays, otherwise the ID Token claim
value takes presedence and overwrites the userinfo response.
This adds the node name where we fail to start a process via the native
controller to facilitate debugging as otherwise it might not be known
to which node the job was allocated.
Moves the test infrastructure away from using node.max_local_storage_nodes, allowing us in a
follow-up PR to deprecate this setting in 7.x and to remove it in 8.0.
This also changes the behavior of InternalTestCluster so that starting up nodes will not automatically
reuse data folders of previously stopped nodes. If this behavior is desired, it needs to be explicitly
done by passing the data path from the stopped node to the new node that is started.
SHA256 was recently added to the Hasher class in order to be used
in the TokenService. A few tests were still using values() to get
the available algorithms from the Enum and it could happen that
SHA256 would be picked up by these.
This change adds an extra convenience method
(Hasher#getAvailableAlgoCacheHash) and enures that only this and
Hasher#getAvailableAlgoStoredHash are used for getting the list of
available password hashing algorithms in our tests.
This performs a simple restart test to move a basic licensed
cluster from no security (the default) to security & transport TLS
enabled.
Backport of: #41933
Re-enable muted tests and accommodate recent backend changes
that result in higher memory usage being reported for a job
at the start of its life-cycle
This corrects what appears to have been a copy-paste error
where the logger for `MachineLearning` and `DataFrame` was wrongly
set to be that of `XPackPlugin`.
If there are no realms that depend on the native role mapping store,
then changes should it should not perform any cache refresh.
A refresh with an empty realm array will refresh all realms.
This also fixes a spurious log warning that could occur if the
role mapping store was notified that the security index was recovered
before any realm were attached.
Backport of: #42169
Rollup jobs can define how long they should wait before rolling up new documents.
However if the delay is smaller or if it's not a multiple of the rollup interval
the job can create incomplete buckets because the max boundary for a job is computed
from the time when the job started rounded to the interval minus the delay. This change
fixes this computation by applying the delay substraction before the rounding in order to ensure
that we never create a boundary that falls in a middle of a bucket.
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
This commit changes how access tokens and refresh tokens are stored
in the tokens index.
Access token values are now hashed before being stored in the id
field of the `user_token` and before becoming part of the token
document id. Refresh token values are hashed before being stored
in the token field of the `refresh_token`. The tokens are hashed
without a salt value since these are v4 UUID values that have
enough entropy themselves. Both rainbow table attacks and offline
brute force attacks are impractical.
As a side effect of this change and in order to support multiple
concurrent refreshes as introduced in #39631, upon refreshing an
<access token, refresh token> pair, the superseding access token
and refresh tokens values are stored in the superseded token doc,
encrypted with a key that is derived from the superseded refresh
token. As such, subsequent requests to refresh the same token in
the predefined time window will return the same superseding access
token and refresh token values, without hitting the tokens index
(as this only stores hashes of the token values). AES in GCM
mode is used for encrypting the token values and the key
derivation from the superseded refresh token uses a small number
of iterations as it needs to be quick.
For backwards compatibility reasons, the new behavior is only
enabled when all nodes in a cluster are in the required version
so that old nodes can cope with the token values in a mixed
cluster during a rolling upgrade.
This commit updates the default ciphers and TLS protocols that are used
when the runtime JDK supports them. New cipher support has been
introduced in JDK 11 and 12 along with performance fixes for AES GCM.
The ciphers are ordered with PFS ciphers being most preferred, then
AEAD ciphers, and finally those with mainstream hardware support. When
available stronger encryption is preferred for a given cipher.
This is a backport of #41385 and #41808. There are known JDK bugs with
TLSv1.3 that have been fixed in various versions. These are:
1. The JDK's bundled HttpsServer will endless loop under JDK11 and JDK
12.0 (Fixed in 12.0.1) based on the way the Apache HttpClient performs
a close (half close).
2. In all versions of JDK 11 and 12, the HttpsServer will endless loop
when certificates are not trusted or another handshake error occurs. An
email has been sent to the openjdk security-dev list and #38646 is open
to track this.
3. In JDK 11.0.2 and prior there is a race condition with session
resumption that leads to handshake errors when multiple concurrent
handshakes are going on between the same client and server. This bug
does not appear when client authentication is in use. This is
JDK-8213202, which was fixed in 11.0.3 and 12.0.
4. In JDK 11.0.2 and prior there is a bug where resumed TLS sessions do
not retain peer certificate information. This is JDK-8212885.
The way these issues are addressed is that the current java version is
checked and used to determine the supported protocols for tests that
provoke these issues.
Muting a number of AutoDetectMemoryLimitIT tests to give CI a chance to
settle before easing in required backend changes.
relates elastic/ml-cpp#486
relates #42086
Improve the hard_limit memory audit message by reporting how many bytes
over the configured memory limit the job was at the point of the last
allocation failure.
Previously the model memory usage was reported, however this was
inaccurate and hence of limited use - primarily because the total
memory used by the model can decrease significantly after the models
status is changed to hard_limit but before the model size stats are
reported from autodetect to ES.
While this PR contains the changes to the format of the hard_limit audit
message it is dependent on modifications to the ml-cpp backend to
send additional data fields in the model size stats message. These
changes will follow in a subsequent PR. It is worth noting that this PR
must be merged prior to the ml-cpp one, to keep CI tests happy.
Due to a bug in JTS WKT parser, JTS cannot parse most of WKT shapes if
the shape type is written in the lower case. For examples `point (1 2)`
is causing JTS inside H2GIS to fail on tr-TR locale as a result of
case-insensitive comparison.
This change replaces the extremely unfriendly message
"Number of messages analyzed must be positive" in the
case where the sample lines were incorrectly grouped
into just one message to an error that more helpfully
explains the likely root cause of the problem.
Hendrik Muhs
David Roberts
Tim Vernum
Ryan Ernst
Costin Leau
Costin Leau
Zachary Tong
David Kyle
Jim Ferenczi
Jim Ferenczi
Mengwei Ding
Luca Cavanna
Yannick Welsch
Simon Willnauer
Alpar Torok
Ioannis Kakavas
Dimitris Athanasiou
Ed Savage
Ed Savage
Tal Levy
Alexander Reelsen
Jay Modi
Lisa Cawley
Benjamin Trent
Igor Motov