This change proposes the removal of all non-tcp transport implementations. The
mock transport can be used by default to run tests instead of local transport that has
roughly the same performance compared to TCP or at least not noticeably slower.
This is a master only change, deprecation notice in 5.x will be committed as a
separate change.
This commit modifies the call sites that allocate a parameterized
message to use a supplier so that allocations are avoided unless the log
level is fine enough to emit the corresponding log message.
This makes it obvious that these tests are for running the client yaml
suites. Now that there are other ways of running tests using the REST
client against a running cluster we can't go on calling the shared
client yaml tests "REST tests". They are rest tests, but they aren't
**the** rest tests.
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
This change adds a createComponents() method to Plugin implementations
which they can use to return already constructed componenents/services.
Eventually this should be just services ("components" don't really do
anything), but for now it allows any object so that preconstructed
instances by plugins can still be bound to guice. Over time we should
add basic services as arguments to this method, but for now I have left
it empty so as to not presume what is a necessary service.
Today throughout the codebase, catch throwable is used with reckless
abandon. This is dangerous because the throwable could be a fatal
virtual machine error resulting from an internal error in the JVM, or an
out of memory error or a stack overflow error that leaves the virtual
machine in an unstable and unpredictable state. This commit removes
catch throwable from the codebase and removes the temptation to use it
by modifying listener APIs to receive instances of Exception instead of
the top-level Throwable.
Relates #19231
The only reason for LifecycleComponent taking a generic type was so that
it could return that type on its start and stop methods. However, this
chaining has no practical necessity. Instead, start and stop can be
void, and a whole bunch of confusing generics disappear.
When GCE region is empty we get back from the API something like:
```
{
"id": "dummy"
}
```
instead of:
```
{
"id": "dummy",
"items":[ ]
}
```
This generates a NPE when we aggregate all the lists into a single one.
Closes#16967.
We pretended to be able to ackt like a different version node for so long it's
time to be honest and remove this ability. It's just confusing and where needed
and tested we should build dedicated extension points.
This change removes some unnecessary dependencies from ClusterService
and cleans up ClusterName creation. ClusterService is now not created
by guice anymore.
Today we have a push model for registering basically anything. All our extension points
are defined on modules which we pass in to plugins. This is harder to maintain and adds
unnecessary dependencies on the modules itself. This change moves towards a pull model
where the plugin offers a getter kind of method to get the extensions. This will also
help in the future if we need to pass dependencies to the extension points which can
easily be defined on the method as arguments if a pull model is used.
In 2.0 we added plugin descriptors which require defining a name and
description for the plugin. However, we still have name() and
description() which must be overriden from the Plugin class. This still
exists for classpath plugins. But classpath plugins are mainly for
tests, and even then, referring to classpath plugins with their class is
a better idea. This change removes name() and description(), replacing
the name for classpath plugins with the full class name.
This commit refactors the handling of thread pool settings so that the
individual settings can be registered rather than registering the top
level group. With this refactoring, individual plugins must now register
their own settings for custom thread pools that they need, but a
dedicated API is provided for this in the thread pool module. This
commit also renames the prefix on the thread pool settings from
"threadpool" to "thread_pool". This enables a hard break on the settings
so that:
- some of the settings can be given more sensible names (e.g., the max
number of threads in a scaling thread pool is now named "max" instead
of "size")
- change the soft limit on the number of threads in the bulk and
indexing thread pools to a hard limit
- the settings names for custom plugins for thread pools can be
prefixed (e.g., "xpack.watcher.thread_pool.size")
- remove dynamic thread pool settings
Relates #18674
This PR changes the InternalTestCluster to support dedicated master nodes. The creation of dedicated master nodes can be controlled using a new `supportsMasterNodes` parameter to the ClusterScope annotation. If set to true (the default), dedicated master nodes will randomly be used. If set to false, no master nodes will be created and data nodes will also be allowed to become masters. If active, test runs will either have 1 or 3 masternodes
This commit introduces a handshake when initiating a light
connection. During this handshake, node information, cluster name, and
version are received from the target node of the connection. This
information can be used to immediately validate that the target node is
a member of the same cluster, and used to set the version on the
stream. This will allow us to extend APIs that are used during initial
cluster recovery without a major version change.
Relates #15971
This commit removes the method Strings#splitStringToArray and replaces
the call sites with invocations to String#split. There are only two
explanations for the existence of this method. The first is that
String#split is slightly tricky in that it accepts a regular expression
rather than a character to split on. This means that if s is a string,
s.split(".") does not split on the character '.', but rather splits on
the regular expression '.' which splits on every character (of course,
this is easily fixed by invoking s.split("\\.") instead). The second
possible explanation is that (again) String#split accepts a regular
expression. This means that there could be a performance concern
compared to just splitting on a single character. However, it turns out
that String#split has a fast path for the case of splitting on a single
character and microbenchmarks show that String#split has 1.5x--2x the
throughput of Strings#splitStringToArray. There is a slight behavior
difference between Strings#splitStringToArray and String#split: namely,
the former would return an empty array in cases when the input string
was null or empty but String#split will just NPE at the call site on
null and return a one-element array containing the empty string when the
input string is empty. There was only one place relying on this behavior
and the call site has been modified accordingly.
For now we support `_gce_` only if discovery is set to `gce` and all information about GCE is provided (project_id and zone).
But in some cases, people would like to only bind to `_gce_` on a single node (without any elasticsearch cluster).
They could access the machine then from other machines running inside the same project.
This commit adds a new GceMetadataService which is started as soon as the plugin is started so GceNameResolver can use it to resolve `_gce`.
Closes#15724.
This removes the inconsistent output of IP addresses. The format was parsing-unfriendly and it makes it hard
to reason about API responses, such as to _nodes.
With this change in place, it will never print the hostname as part of the default format, which has the
added benefit that it can be used consistently for URIs, which was not the case when the hostname might
appear at the front with "hostname/ip:port".
Node roles are now serialized as well, they are not part of the node attributes anymore. DiscoveryNodeService takes care of dividing settings into attributes and roles. DiscoveryNode always requires to pass in attributes and roles separately.
Add setFactory permission to GceDiscoveryPlugin
This commit adds a missing permission and a simple test that
ensures we discover other nodes via a mock http endpoint.
Closes#16485
DiscoveryService was a bridge into the discovery universe. This is unneeded and we can just access discovery directly or do things in a different way.
One of those different ways, is not having a dedicated discovery implementation for each our dicovery plugins but rather reuse ZenDiscovery.
UnicastHostProviders are now classified by discovery type, removing unneeded checks on plugins.
Closes#16821
The rest test framework, because it used to be tightly integrated with
ESIntegTestCase, currently expects the addresses for the test cluster to
be passed using the transport protocol port. However, it only uses this
to then find the http address.
This change makes ESRestTestCase extend from ESTestCase instead of
ESIntegTestCase, and changes the sysprop used to tests.rest.cluster,
which now takes the http address.
closes#15459
Site plugins used to be used for things like kibana and marvel, but
there is no longer a need since kibana (and marvel as a kibana plugin)
uses node.js. This change removes site plugins, as well as the flag for
jvm plugins. Now all plugins are jvm plugins.
This commit adds the infrastructure to make settings that are updateable
resetable and changes the application of updates to be transactional. This means
setting updates are either applied or not. If the application failes all values are rejected.
This initial commit converts all dynamic cluster settings to make use of the new infrastructure.
All cluster level dynamic settings are not resettable to their defaults or to the node level settings.
The infrastructure also allows to list default values and descriptions which is not fully implemented yet.
Values can be reset using a list of key or simple regular expressions. This has only been implemented on the java
layer yet. For instance to reset all recovery settings to their defaults a user can just specify `indices.recovery.*`.
This commit also adds strict settings validation, if a setting is unknown or if a setting can not be applied the entire
settings update request will fail.
This commit removes and now forbids all uses of the type-unsafe empty
Collections fields Collections#EMPTY_LIST, Collections#EMPTY_MAP, and
Collections#EMPTY_SET. The type-safe methods Collections#emptyList,
Collections#emptyMap, and Collections#emptySet should be used instead.
* Allow for multiple host specifications (e.g. _en0_,192.168.1.2,_site_).
* Add _site_ and _global_ scopes as counterparts to _local_.
* Warn on heuristic selection of publish address.
* Remove the arbitrary _non_loopback_ setting.
Closes#13954
There are three ways `@Test` was used. Way one:
```java
@Test
public void flubTheBlort() {
```
This way was always replaced with:
```java
public void testFlubTheBlort() {
```
Or, maybe with a better method name if I was feeling generous.
Way two:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
methodThatThrows();
}
```
This way of using `@Test` is actually pretty OK, but to get the tools to ban
`@Test` entirely it can't be used. Instead:
```java
public void testFoo() {
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
This is longer but tests more than the old ways and is much more precise.
Compare:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
methodThatThrows();
code(); // <---- This was left here by mistake and is never called
}
```
to:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
The final use of test is:
```java
@Test(timeout=1000)
public void testFoo() {
methodThatWasSlow();
}
```
This is the most insidious use of `@Test` because its tempting but tragically
flawed. Its flaws are:
1. Hard and fast timeouts can look like they are asserting that something is
faster and even do an ok job of it when you compare the timings on the same
machine but as soon as you take them to another machine they start to be
invalid. On a slow VM both the new and old methods fail. On a super-fast
machine the slower and faster ways succeed.
2. Tests often contain slow `assert` calls so the performance of tests isn't
sure to predict the performance of non-test code.
3. These timeouts are rude to debuggers because the test just drops out from
under it after the timeout.
Confusingly, timeouts are useful in tests because it'd be rude for a broken
test to cause CI to abort the whole build after it hits a global timeout. But
those timeouts should be very very long "backstop" timeouts and aren't useful
assertions about speed.
For all its flaws `@Test(timeout=1000)` doesn't have a good replacement __in__
__tests__. Nightly benchmarks like http://benchmarks.elasticsearch.org/ are
useful here because they run on the same machine but they aren't quick to check
and it takes lots of time to figure out the regressions. Sometimes its useful
to compare dueling implementations but that requires keeping both
implementations around. All and all we don't have a satisfactory answer to the
question "what do you replace `@Test(timeout=1000)`" with. So we handle each
occurrence on a case by case basis.
For files with `@Test` this also:
1. Removes excess blank lines. They don't help anything.
2. Removes underscores from method names. Those would fail any code style
checks we ever care to run and don't add to readability. Since I did this manually
I didn't do it consistently.
3. Make sure all test method names start with `test`. Some used to end in `Test` or start
with `verify` or `check` and they were picked up using the annotation. Without the
annotation they always need to start with `test`.
4. Organizes imports using the rules we generate for Eclipse. For the most part
this just removes `*` imports which is a win all on its own. It was "required"
to quickly remove `@Test`.
5. Removes unneeded casts. This is just a setting I have enabled in Eclipse and
forgot to turn off before I did this work. It probably isn't hurting anything.
6. Removes trailing whitespace. Again, another Eclipse setting I forgot to turn
off that doesn't hurt anything. Hopefully.
7. Swaps some tests override superclass tests to make them empty with
`assumeTrue` so that the reasoning for the skips is logged in the test run and
it doesn't "look like" that thing is being tested when it isn't.
8. Adds an oxford comma to an error message.
The total test count doesn't change. I know. I counted.
```bash
git checkout master && mvn clean && mvn install | tee with_test
git no_test_annotation master && mvn clean && mvn install | tee not_test
grep 'Tests summary' with_test > with_test_summary
grep 'Tests summary' not_test > not_test_summary
diff with_test_summary not_test_summary
```
These differ somewhat because some tests are skipped based on the random seed.
The total shouldn't differ. But it does!
```
1c1
< [INFO] Tests summary: 564 suites (1 ignored), 3171 tests, 31 ignored (31 assumptions)
---
> [INFO] Tests summary: 564 suites (1 ignored), 3167 tests, 17 ignored (17 assumptions)
```
These are the core unit tests. So we dig further:
```bash
cat with_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > with_test_suites
cat not_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > not_test_suites
diff <(sort with_test_suites) <(sort not_test_suites)
```
The four tests with lower test numbers are all extend `AbstractQueryTestCase`
and all have a method that looks like this:
```java
@Override
public void testToQuery() throws IOException {
assumeTrue("test runs only when at least a type is registered", getCurrentTypes().length > 0);
super.testToQuery();
}
```
It looks like this method was being double counted on master and isn't anymore.
Closes#14028
* Add ability for plugins to declare additional permissions with a custom plugin-security.policy file and corresponding AccessController logic. See the plugin author's guide for more information.
* Add warning messages to users for extra plugin permissions in bin/plugin.
* When bin/plugin is run interactively (stdin is a controlling terminal and -b/--batch not supplied), require user confirmation.
* Improve unit test and IDE support for plugins with additional permissions by exposing plugin's metadata as a maven test resource.
Closes#14108
Squashed commit of the following:
commit cf8ace65a7397aaccd356bf55f95d6fbb8bb571c
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 13:36:05 2015 -0400
fix new unit test from master merge
commit 9be3c5aa38f2d9ae50f3d54924a30ad9cddeeb65
Merge: 2f168b8 7368231
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:58:31 2015 -0400
Merge branch 'master' into off_my_back
commit 2f168b8038e32672f01ad0279fb5db77ba902ae8
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:56:04 2015 -0400
improve plugin author documentation
commit 6e6c2bfda68a418d92733ac22a58eec35508b2d0
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:52:14 2015 -0400
move security confirmation after 'plugin already installed' check, to prevent user from answering unnecessary questions.
commit 08233a2972554afef2a6a7521990283102e20d92
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 05:36:42 2015 -0400
Add documentation and pluginmanager support
commit 05dad86c51488ba43ccbd749f0164f3fbd3aee62
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 02:22:24 2015 -0400
Decentralize plugin permissions (modulo docs and pluginmanager work)
Simon Willnauer
Jason Tedor
Nik Everett
David Pilato
Ryan Ernst
Tanguy Leroux
Simon Willnauer
Boaz Leskes
Chris Earle
javanna
thefourtheye
Lee Hinman
Yannick Welsch
Robert Muir
xuzha