As a follow-up to #38540 we can use lambda functions and method
references where convenient in the low-level REST client.
Also, we need to update the docs to state that the minimum java version
required is 1.8.
This commit reworks and clarifies the docs for the `discovery-ec2` plugin:
- folds the tiny "Getting started with AWS" into the page on configuration
- spells out the name of each setting in full instead of noting the
`discovery.ec2` prefix at the top of the page.
- replaces each `(Secure)` marker with a sentence describing what that means in
situ
- notes some missing defaults
- clarifies the behaviour of `discovery.ec2.groups` (dependent on `.any_group`)
- clarifies what `discovery.ec2.host_type` is for
- adds `discovery.ec2.tag.TAGNAME` as a (meta-)setting rather than describing
it in a separate section
- notes that the tags mentioned in `discovery.ec2.tag.TAGNAME` cannot contain
colons (see #38406)
- clarifies the EC2-specific interface names and what they're for
- reorders and rewords the recommendations for storage
- expands on why you should not span a cluster across regions
- adds a suggestion on protecting instances against termination during scale-in
- reformat to 80 columns where possible
Fixes#38406
Downgrading an Elasticsearch node to an earlier version is unsupported, because
we do not make any attempt to guarantee that a node can read any of the on-disk
data written by a future version. Yet today we do not actively prevent
downgrades, and sometimes users will attempt to roll back a failed upgrade with
an in-place downgrade and get into an unrecoverable state.
This change adds the current version of the node to the node metadata file, and
checks the version found in this file against the current version at startup.
If the node cannot be sure of its ability to read the on-disk data then it
refuses to start, preserving any on-disk data in its upgraded state.
This change also adds a command-line tool to overwrite the node metadata file
without performing any version checks, to unsafely bypass these checks and
recover the historical and lenient behaviour.
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
This commit updates the default ciphers and TLS protocols that are used
when the runtime JDK supports them. New cipher support has been
introduced in JDK 11 and 12 along with performance fixes for AES GCM.
The ciphers are ordered with PFS ciphers being most preferred, then
AEAD ciphers, and finally those with mainstream hardware support. When
available stronger encryption is preferred for a given cipher.
This is a backport of #41385 and #41808. There are known JDK bugs with
TLSv1.3 that have been fixed in various versions. These are:
1. The JDK's bundled HttpsServer will endless loop under JDK11 and JDK
12.0 (Fixed in 12.0.1) based on the way the Apache HttpClient performs
a close (half close).
2. In all versions of JDK 11 and 12, the HttpsServer will endless loop
when certificates are not trusted or another handshake error occurs. An
email has been sent to the openjdk security-dev list and #38646 is open
to track this.
3. In JDK 11.0.2 and prior there is a race condition with session
resumption that leads to handshake errors when multiple concurrent
handshakes are going on between the same client and server. This bug
does not appear when client authentication is in use. This is
JDK-8213202, which was fixed in 11.0.3 and 12.0.
4. In JDK 11.0.2 and prior there is a bug where resumed TLS sessions do
not retain peer certificate information. This is JDK-8212885.
The way these issues are addressed is that the current java version is
checked and used to determine the supported protocols for tests that
provoke these issues.
Adds a note that restarting half-or-more of the master-eligible nodes means
you're no longer doing a rolling upgrade, and may need to upgrade all the
things before the cluster returns to health.
Configurations are stored in the .data-frame-internal-1
index, but users should not add configurations directly to
the index as additional information to enable access control
is added. This adds a warning against allowing access to the
internal index.
The migrate tool was added when the native realm was created, to aid
users in converting from file realms that were per node, into the
cluster managed native realm. While this tool was useful at the time,
users should now be using the native realm directly. This commit
deprecates the tool, to be removed in a followup for 8.0.
Adds an initial limited implementations of geo features to SQL. This implementation is based on the [OpenGIS® Implementation Standard for Geographic information - Simple feature access](http://www.opengeospatial.org/standards/sfs), which is the current standard for GIS system implementation. This effort is concentrate on SQL option AKA ISO 19125-2.
Queries that are supported as a result of this initial implementation
Metadata commands
- `DESCRIBE table` - returns the correct column types `GEOMETRY` for geo shapes and geo points.
- `SHOW FUNCTIONS` - returns a list that includes supported `ST_` functions
- `SYS TYPES` and `SYS COLUMNS` display correct types `GEO_SHAPE` and `GEO_POINT` for geo shapes and geo points accordingly.
Returning geoshapes and geopoints from elasticsearch
- `SELECT geom FROM table` - returns the geoshapes and geo_points as libs/geo objects in JDBC or as WKT strings in console.
- `SELECT ST_AsWKT(geom) FROM table;` and `SELECT ST_AsText(geom) FROM table;`- returns the geoshapes ang geopoints in their WKT representation;
Using geopoints to elasticsearch
- The following functions will be supported for geopoints in queries, sorting and aggregations: `ST_GeomFromText`, `ST_X`, `ST_Y`, `ST_Z`, `ST_GeometryType`, and `ST_Distance`. In most cases when used in queries, sorting and aggregations, these function are translated into script. These functions can be used in the SELECT clause for both geopoints and geoshapes.
- `SELECT * FROM table WHERE ST_Distance(ST_GeomFromText(POINT(1 2), point) < 10;` - returns all records for which `point` is located within 10m from the `POINT(1 2)`. In this case the WHERE clause is translated into a range query.
Limitations:
Geoshapes cannot be used in queries, sorting and aggregations as part of this initial effort. In order to fully take advantage of geoshapes we would need to have access to geoshape doc values, which is coming in #37206. `ST_Z` cannot be used on geopoints in queries, sorting and aggregations since we don't store altitude in geo_point doc values.
Relates to #29872
Backport of #42031
* [ML] adding pivot.size option for setting paging size
* Changing field name to address PR comments
* fixing ctor usage
* adjust hlrc for field name change
This commit slightly reworks the recommendations in the docs about setting the
heap size:
* the "rules of thumb" are actually instructions that should be followed
* the reason for setting `Xmx` to 50% of the heap size is more subtle than just
leaving space for the filesystem cache
* it is normal to see Elasticsearch using more memory than `Xmx`
* replace `cutoff` and `limit` with `threshold` since all three terms are used
interchangeably
* since we recommend setting `Xmx` equal to `Xms`, avoid talking about setting
`Xmx` in isolation
Relates #41954
This processor uses the lucene HTMLStripCharFilter class to remove HTML
entities from a field. This adds to the char filter, so that there is
possibility to store the stripped version as well.
Note, that the characeter filter replaces tags with a newline, so that
the produced HTML will look slightly different than the incoming HTML
with regards to newlines.
The `bulk` threadpool is now called `write`, but `bulk` is still
used in some examples. This commit fixes that.
Also, the only way `threadpool.bulk.write: 30` is a valid increase in the size
of this threadpool is if you have 29 processors, which is an odd number of
processors to have. This commit removes the "more threads" bit.
In cases where node names and transport addresses can be muddled, it is unclear
that `cluster.initial_master_nodes: master-a:9300` means to look for a node
called `master-a:9300` rather than a node called `master-a` with transport port
`9300`. This commit adds docs to that effect.
Today Elasticsearch accepts, but silently ignores, port ranges in the
`discovery.seed_hosts` setting:
```
discovery.seed_hosts: 10.1.2.3:9300-9400
```
Silently ignoring part of a setting like this is trappy. With this change we
reject seed host addresses of this form.
Closes#40786
Backport of #41404
The settings listed under the "Default values for TLS/SSL settings"
heading are not actual settings, rather they are common suffixes that
are used for settings that exist in a variety of contexts.
This commit changes the way they are presented to reduce this
confusion.
Backport of: #41779
The CircuitBreaker was introduced as means of preventing a
`StackOverflowException` during the build of the AST by the parser.
The ANTLR4 grammar causes a weird behaviour for a Parser Listener.
The `enterEveryRule()` method is often called with a different parsing
context than the respective `exitEveryRule()`. This makes it difficult
to keep track of the tree's depth, and a custom Map was used as an
attempt of matching the contextes as they are encounter during `enter`
and during `exit` of the rules.
This approach had 2 important drawbacks:
1. It's hard to maintain this custom Map as the grammar changes.
2. The CircuitBreaker could often lead to false positives which caused
valid queries to return an Exception and prevent them from executing.
So, this removes completely the CircuitBreaker which is replaced be
a simple handling of the `StackOverflowException`
Fixes: #41471
(cherry picked from commit 1559a8e2dbd729138b52e89b7e80264c9f4ad1e7)
The `path_match` and `path_unmatch` parameters in dynamic templates match on
object fields in addition to leaf fields. This is not obvious and can cause
surprising errors when a template is meant for a leaf field, but there are
object fields that match. This PR adds a note to the docs to describe the
current behavior.
We received some feedback that it is not completely clear why `_doc` is present
in the typeless document APIs:
> The new index APIs are PUT {index}/_doc/{id} in case of explicit ids and POST
{index}/_doc for auto-generated ids."_ Isn't this contradicting? Specifying
*types in requests is deprecated*, but we are supposed to still mention *_doc*
in write requests?
This PR updates the 'removal of types' documentation to try to clarify that
`_doc` now represents the endpoint name, as opposed to a type.
Add a TIP on how to use CASE to achieve custom bucketing
with GROUP BY.
Follows: #41349
(cherry picked from commit eb5f5d45533c5f81e57dd0221d902a73ec400098)
Jim Ferenczi
Jake Landis
swstepp
Julie Tibshirani
Luca Cavanna
Alpar Torok
David Turner
Jack Conradson
Glen Smith
Mayya Sharipova
Zachary Tong
Jay Modi
Lisa Cawley
Nhat Nguyen
Hendrik Muhs
Ryan Ernst
Igor Motov
James Rodewig
Benjamin Trent
Jason Tedor
Christian Mesh
Daniel Schneiter
Alexander Reelsen
Flavio Pompermaier
Gordon Brown
Yannick Welsch
Tim Vernum
Marios Trivyzas
Alan Woodward
Issam EL-ATIF
Marios Trivyzas