This commit fixes a bug that caused the data frame analytics
_explain API to time out in a multi-node setup when the source
index was missing. When we try to create the extracted fields detector,
we check the index settings. If the index is missing that responds
with a failure that could be wrapped as a remote exception.
While we unwrapped correctly to check if the cause was an
`IndexNotFoundException`, we then proceeded to cast the original
exception instead of the cause.
Backport of #50176
* [ML] Add graceful retry for anomaly detector result indexing failures (#49508)
All results indexing now retry the amount of times configured in `xpack.ml.persist_results_max_retries`. The retries are done in a semi-random, exponential backoff.
* fixing test
The `ClassificationIT.testTwoJobsWithSameRandomizeSeedUseSameTrainingSet`
test was previously set up to just have 10 rows. With `training_percent`
of 50%, only 5 rows will be used for training. There is a good chance that
all 5 rows will be of one class which results to failure.
This commit increases the rows to 100. Now 50 rows should be used for training
and the chance of failure should be very small.
Backport of #50072
This adds a new `randomize_seed` for regression and classification.
When not explicitly set, the seed is randomly generated. One can
reuse the seed in a similar job in order to ensure the same docs
are picked for training.
Backport of #49990
When checking the cardinality of a field, the query should be take into account. The user might know about some bad data in their index and want to filter down to the target_field values they care about.
Work in progress in the c++ side is increasing memory estimates
a bit and this test fails. At the time of this commit the mem
estimate when there is no source query is a about 2Mb. So I
am relaxing the test to assert memory estimate is less than 1Mb
instead of 500Kb.
Backport of #49924
This adds a `_source` setting under the `source` setting of a data
frame analytics config. The new `_source` is reusing the structure
of a `FetchSourceContext` like `analyzed_fields` does. Specifying
includes and excludes for source allows selecting which fields
will get reindexed and will be available in the destination index.
Closes#49531
Backport of #49690
This commit replaces the _estimate_memory_usage API with
a new API, the _explain API.
The API consolidates information that is useful before
creating a data frame analytics job.
It includes:
- memory estimation
- field selection explanation
Memory estimation is moved here from what was previously
calculated in the _estimate_memory_usage API.
Field selection is a new feature that explains to the user
whether each available field was selected to be included or
not in the analysis. In the case it was not included, it also
explains the reason why.
Backport of #49455
* [ML] ML Model Inference Ingest Processor (#49052)
* [ML][Inference] adds lazy model loader and inference (#47410)
This adds a couple of things:
- A model loader service that is accessible via transport calls. This service will load in models and cache them. They will stay loaded until a processor no longer references them
- A Model class and its first sub-class LocalModel. Used to cache model information and run inference.
- Transport action and handler for requests to infer against a local model
Related Feature PRs:
* [ML][Inference] Adjust inference configuration option API (#47812)
* [ML][Inference] adds logistic_regression output aggregator (#48075)
* [ML][Inference] Adding read/del trained models (#47882)
* [ML][Inference] Adding inference ingest processor (#47859)
* [ML][Inference] fixing classification inference for ensemble (#48463)
* [ML][Inference] Adding model memory estimations (#48323)
* [ML][Inference] adding more options to inference processor (#48545)
* [ML][Inference] handle string values better in feature extraction (#48584)
* [ML][Inference] Adding _stats endpoint for inference (#48492)
* [ML][Inference] add inference processors and trained models to usage (#47869)
* [ML][Inference] add new flag for optionally including model definition (#48718)
* [ML][Inference] adding license checks (#49056)
* [ML][Inference] Adding memory and compute estimates to inference (#48955)
* fixing version of indexed docs for model inference
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
Aggregatable mutli-fields are at the moment wrongly mapped
as normal doc_value fields and thus they support fetching from
source. However, they do not exist in the source. This results
to failure to extract such fields.
This commit fixes this bug. While a fix could be worked out
on top of the existing code, it is evident the extraction logic
has become difficult to understand and maintain. As we also
want to deduplicate multi-fields for data frame analytics,
it seemed appropriate to refactor the code to simplify and
better handle the extraction of multi-fields.
Relates #48756
Backport of #48770
If a job stops right after reindexing is finished but before
we refresh the destination index, we don't refresh at all.
If the job is started again right after, it jumps into the analyzing state.
However, the data is still not searchable.
This is why we were seeing test failures that we start the process
expecting X rows (where X is lower than the expected number of docs)
and we end up getting X+.
We fix this by moving the refresh of the dest index right before
we start the process so it always ensures the data is searchable.
Closes#47612
Backport of #48090
Audit messages are stored with millisecond timestamps. If two
messages have the same millisecond timestamp then asserting on
their order is impossible given the information available.
This PR changes the assertion on audit messages in the native
data frame analytics tests to assert that the expected audit
messages exist in any order.
Fixes#48035
This change adds:
- A new option, allow_lazy_open, to anomaly detection jobs
- A new option, allow_lazy_start, to data frame analytics jobs
Both work in the same way: they allow a job to be
opened/started even if no ML node exists that can
accommodate the job immediately. In this situation
the job waits in the opening/starting state until ML
node capacity is available. (The starting state for data
frame analytics jobs is new in this change.)
Additionally, the ML nightly maintenance tasks now
creates audit warnings for ML jobs that are unassigned.
This means that jobs that cannot be assigned to an ML
node for a very long time will show a yellow warning
triangle in the UI.
A final change is that it is now possible to close a job
that is not assigned to a node without using force.
This is because previously jobs that were open but
not assigned to a node were an aberration, whereas
after this change they'll be relatively common.
Adds a new datafeed config option, max_empty_searches,
that tells a datafeed that has never found any data to stop
itself and close its associated job after a certain number
of real-time searches have returned no data.
Backport of #47922
Adds the following parameters to `outlier_detection`:
- `compute_feature_influence` (boolean): whether to compute or not
feature influence scores
- `outlier_fraction` (double): the proportion of the data set assumed
to be outlying prior to running outlier detection
- `standardization_enabled` (boolean): whether to apply standardization
to the feature values
Backport of #47600
This commit restores the model state if available in data
frame analytics jobs.
In addition, this changes the start API so that a stopped job
can be restarted. As we now store the progress in the state index
when the task is stopped, we can use it to determine what state
the job was in when it got stopped.
Note that in order to be able to distinguish between a job
that runs for the first time and another that is restarting,
we ensure reindexing progress is reported to be at least 1
for a running task.
Backport of #45794 to 7.x. Convert most `awaitBusy` calls to
`assertBusy`, and use asserts where possible. Follows on from #28548 by
@liketic.
There were a small number of places where it didn't make sense to me to
call `assertBusy`, so I kept the existing calls but renamed the method to
`waitUntil`. This was partly to better reflect its usage, and partly so
that anyone trying to add a new call to awaitBusy wouldn't be able to find
it.
I also didn't change the usage in `TransportStopRollupAction` as the
comments state that the local awaitBusy method is a temporary
copy-and-paste.
Other changes:
* Rework `waitForDocs` to scale its timeout. Instead of calling
`assertBusy` in a loop, work out a reasonable overall timeout and await
just once.
* Some tests failed after switching to `assertBusy` and had to be fixed.
* Correct the expect templates in AbstractUpgradeTestCase. The ES
Security team confirmed that they don't use templates any more, so
remove this from the expected templates. Also rewrite how the setup
code checks for templates, in order to give more information.
* Remove an expected ML template from XPackRestTestConstants The ML team
advised that the ML tests shouldn't be waiting for any
`.ml-notifications*` templates, since such checks should happen in the
production code instead.
* Also rework the template checking code in `XPackRestTestHelper` to give
more helpful failure messages.
* Fix issue in `DataFrameSurvivesUpgradeIT` when upgrading from < 7.4
When the ML native multi-node tests use _cat/indices/_all
and the request goes to a non-master node, _all is
translated to a list of concrete indices by the authz layer
on the coordinating node before the request is forwarded
to the master node. Then it is possible for the master
node to return an index_not_found_exception if one of
the concrete indices that was expanded on the
coordinating node has been deleted in the meantime.
(#47159 has been opened to track the underlying problem.)
It has been observed that the index that gets deleted when
the problem affects the ML native multi-node tests is
always the ML notifications index. The tests that fail are
only interested in the presence or absense of ML results
indices. Therefore the workaround is to only _cat indices
that match the ML results index pattern.
Fixes#45652
Dimitris Athanasiou
Benjamin Trent
Przemysław Witek
Rory Hunter
David Roberts
Igor Motov
Yannick Welsch