Restoring from a snapshot (which is a particular form of recovery) does not currently take recovery throttling into account
(i.e. the `indices.recovery.max_bytes_per_sec` setting). While restores are subject to their own throttling (repository
setting `max_restore_bytes_per_sec`), this repository setting does not allow for values to be configured differently on a
per-node basis. As restores are very similar in nature to peer recoveries (streaming bytes to the node), it makes sense to
configure throttling in a single place.
The `max_restore_bytes_per_sec` setting is also changed to default to unlimited now, whereas previously it was set to
`40mb`, which is the current default of `indices.recovery.max_bytes_per_sec`). This means that no behavioral change
will be observed by clusters where the recovery and restore settings were not adapted.
Relates https://github.com/elastic/elasticsearch/issues/57023
Co-authored-by: James Rodewig <james.rodewig@elastic.co>
Today the disk-based shard allocator accounts for incoming shards by
subtracting the estimated size of the incoming shard from the free space on the
node. This is an overly conservative estimate if the incoming shard has almost
finished its recovery since in that case it is already consuming most of the
disk space it needs.
This change adds to the shard stats a measure of how much larger each store is
expected to grow, computed from the ongoing recovery, and uses this to account
for the disk usage of incoming shards more accurately.
Backport of #58029 to 7.x
* Picky picky
* Missing type
SAML idP sends back a LogoutResponse at the end of the logout workflow. It can be sent via either HTTP-Redirect binding or HTTP-POST binding. Currently, the HTTP-Redirect request is simply ignored by Kibana and never reaches ES. It does not cause any obvious issue and the workflow is completed normally from user's perspective.
The HTTP-POST request results in a 404 error because POST request is not accepted by Kibana's logout end-point. This causes a non-trivial issue because it renders an error page in user's browser. In addition, some resources do not seem to be fully cleaned up due to the error, e.g. the username will be pre-filled when trying to login again after the 404 error.
This PR solves both of the above issues from ES side with a new /_security/saml/complete_logout end-point. Changes are still needed on Kibana side to relay the messages.
Backport of #58419
Mapping updates that originate from indexing a document with unmapped fields will use this new action
instead of the current put mapping action. This way on the security side, authorization logic
can easily determine whether a mapping update is automatically generated or a mapping update originates
from the put mapping api.
The new auto put mapping action is only used if all nodes are on the version that supports it.
This PR implements recursive mapping merging for composable index templates.
When creating an index, we perform the following:
* Add each component template mapping in order, merging each one in after the
last.
* Merge in the index template mappings (if present).
* Merge in the mappings on the index request itself (if present).
Some principles:
* All 'structural' changes are disallowed (but everything else is fine). An
object mapper can never be changed between `type: object` and `type: nested`. A
field mapper can never be changed to an object mapper, and vice versa.
* Generally, each section is merged recursively. This includes `object`
mappings, as well as root options like `dynamic_templates` and `meta`. Once we
reach 'leaf components' like field definitions, they always overwrite an
existing one instead of being merged.
Relates to #53101.
When per_partition_categorization.stop_on_warn is set for an analysis
config it is now passed through to the autodetect C++ process.
Also adds some end-to-end tests that exercise the functionality
added in elastic/ml-cpp#1356
Backport of #58632
* Replace compile configuration usage with api (#58451)
- Use java-library instead of plugin to allow api configuration usage
- Remove explicit references to runtime configurations in dependency declarations
- Make test runtime classpath input for testing convention
- required as java library will by default not have build jar file
- jar file is now explicit input of the task and gradle will ensure its properly build
* Fix compile usages in 7.x branch
RandomZone test method returns a ZoneId from the set of ids supported by
java. The only difference between joda and java supported timezones are
SystemV* timezones.
These should be excluded from randomZone method as they would break
testing. They also do not bring much confidence when used in testing as
I suspect they are rarely used.
That exclude should be removed for simplification once joda support is removed.
This commit adds the BuildParams.testSeed to the repository base paths used
in searchable snapshots QA tests. For S3 and GCS the test seed is added for
coherency sake with other integration tests while it's required for Azure as
Azure 3rd party tests are executed on CI simultaneously for regular and
SAS token accounts.
Closes#58260
The GET /_license endpoint displays "enterprise" licenses as
"platinum" by default so that old clients (including beats, kibana and
logstash) know to interpret this new license type as if it were a
platinum license.
However, this compatibility layer was not applied to the GET /_xpack/
endpoint which also displays a license type & mode.
This commit causes the _xpack API to mimic the _license API and treat
enterprise as platinum by default, with a new accept_enterprise
parameter that will cause the API to return the correct "enterprise"
value.
This BWC layer exists only for the 7.x branch.
This is a breaking change because, since 7.6, the _xpack API has
returned "enterprise" for enterprise licenses, but this has been found
to break old versions of beats and logstash so needs to be corrected.
EQL sequences can specify now a maximum time allowed for their span
(computed between the first and the last matching event).
(cherry picked from commit 747c3592244192a2e25a092f62aec91a899afc83)
* EQL: case sensitivity aware integration testing (#58624)
* Add DataLoader
* Rewrite case sensitivity settings:
NULL -> run both case sensitive and insensitive tests
TRUE -> run case sensitive test only
FALSE -> run case insensitive test only
* Rename test_queries_supported
* Add more toml tests from the Python client
Co-authored-by: Ross Wolf <31489089+rw-access@users.noreply.github.com>
(cherry picked from commit 34d383421599f060a5c083b40df35f135de49e39)
SparseFileTracker.Gap can keep a reference to the corresponding range it is about to fill,
it does not need to resolve the range each time onSuccess/onProgress/onFailure are
called.
Relates #58477
The remote_monitoring_user user needs to access the enrich stats API.
But the request is denied because the API is categorized under admin.
The correct privilege should be monitor.
Adds parsing of `status` and `memory_reestimate_bytes`
to data frame analytics `memory_usage`. When the training surpasses
the model memory limit, the status will be set to `hard_limit` and
`memory_reestimate_bytes` can be used to update the job's
limit in order to restart the job.
Backport of #58588
Introduce pipe support, in particular head and tail
(which can also be chained).
(cherry picked from commit 4521ca3367147d4d6531cf0ab975d8d705f400ea)
(cherry picked from commit d6731d659d012c96b19879d13cfc9e1eaf4745a4)
Today SparseFileTracker allows to wait for a range to become available
before executing a given listener. In the case of searchable snapshot,
we'd like to be able to wait for a large range to be filled (ie, downloaded
and written to disk) while being able to execute the listener as soon as
a smaller range is available.
This pull request is an extract from #58164 which introduces a
ProgressListenableActionFuture that is used internally by
SparseFileTracker. The progressive listenable future allows to register
listeners attached to SparseFileTracker.Gap so that they are executed
once the Gap is completed (with success or failure) or as soon as the
Gap progress reaches a given progress value. This progress value is
defined when the tracker.waitForRange() method is called; this method
has been modified to accept a range and another listener's range to
operate on.
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
If a project is pulling in an external org.elasticsearch dependency, the dependency
report generation would require a license file for the dependency to be present.
This would break precommit because a license was present that it did not feel was
warranted. This un-reverts the update to the dependenciesInfo task, as well as the
JNA license addition.
In SLM retention, when a minimum number of snapshots is required for retention, we prefer to remove
the oldest snapshots first. To perform this, we limit one of the streams, in a rare case this can
cause:
```
[mynode] error during snapshot retention task
java.lang.IllegalArgumentException: -5
at java.util.stream.ReferencePipeline.limit(ReferencePipeline.java:469) ~[?:?]
at org.elasticsearch.xpack.core.slm.SnapshotRetentionConfiguration.lambda$getSnapshotDeletionPredicate$6(SnapshotRetentionConfiguration.java:195) ~[?:?]
at org.elasticsearch.xpack.slm.SnapshotRetentionTask.snapshotEligibleForDeletion(SnapshotRetentionTask.java:245) ~[?:?]
at org.elasticsearch.xpack.slm.SnapshotRetentionTask$1.lambda$onResponse$0(SnapshotRetentionTask.java:163) ~[?:?]
at java.util.stream.ReferencePipeline$2$1.accept(ReferencePipeline.java:176) ~[?:?]
at java.util.ArrayList$ArrayListSpliterator.forEachRemaining(ArrayList.java:1624) ~[?:?]
at java.util.stream.AbstractPipeline.copyInto(AbstractPipeline.java:484) ~[?:?]
at java.util.stream.AbstractPipeline.wrapAndCopyInto(AbstractPipeline.java:474) ~[?:?]
at java.util.stream.ReduceOps$ReduceOp.evaluateSequential(ReduceOps.java:913) ~[?:?]
```
When certain criteria are met. This commit fixes the negative limiting with `Math.max(0, ...)` and
adds a unit test for the behavior.
Resolves#58515
Rather than let ExtensiblePlugins know extending plugins' classloaders,
we now pass along an explicit ExtensionLoader that loads the extensions
asked for. Extensions constructed that way can optionally receive their
own Plugin instance in the constructor.
Today we have individual settings for configuring node roles such as
node.data and node.master. Additionally, roles are pluggable and we have
used this to introduce roles such as node.ml and node.voting_only. As
the number of roles is growing, managing these becomes harder for the
user. For example, to create a master-only node, today a user has to
configure:
- node.data: false
- node.ingest: false
- node.remote_cluster_client: false
- node.ml: false
at a minimum if they are relying on defaults, but also add:
- node.master: true
- node.transform: false
- node.voting_only: false
If they want to be explicit. This is also challenging in cases where a
user wants to have configure a coordinating-only node which requires
disabling all roles, a list which we are adding to, requiring the user
to keep checking whether a node has acquired any of these roles.
This commit addresses this by adding a list setting node.roles for which
a user has explicit control over the list of roles that a node has. If
the setting is configured, the node has exactly the roles in the list,
and not any additional roles. This means to configure a master-only
node, the setting is merely 'node.roles: [master]', and to configure a
coordinating-only node, the setting is merely: 'node.roles: []'.
With this change we deprecate the existing 'node.*' settings such as
'node.data'.
* [ML] make waiting for renormalization optional for internally flushing job (#58537)
When flushing, datafeeds only need the guaruntee that the latest bucket has been handled.
But, in addition to this, the typical call to flush waits for renormalization to complete. For large jobs, this can take a fair bit of time (even longer than a bucket length). This causes unnecessary delays in handling data.
This commit adds a new internal only flag that allows datafeeds (and forecasting) to skip waiting on renormalization.
closes#58395
Implements a new histogram aggregation called `variable_width_histogram` which
dynamically determines bucket intervals based on document groupings. These
groups are determined by running a one-pass clustering algorithm on each shard
and then reducing each shard's clusters using an agglomerative
clustering algorithm.
This PR addresses #9572.
The shard-level clustering is done in one pass to minimize memory overhead. The
algorithm was lightly inspired by
[this paper](https://ieeexplore.ieee.org/abstract/document/1198387). It fetches
a small number of documents to sample the data and determine initial clusters.
Subsequent documents are then placed into one of these clusters, or a new one
if they are an outlier. This algorithm is described in more details in the
aggregation's docs.
At reduce time, a
[hierarchical agglomerative clustering](https://en.wikipedia.org/wiki/Hierarchical_clustering)
algorithm inspired by [this paper](https://arxiv.org/abs/1802.00304)
continually merges the closest buckets from all shards (based on their
centroids) until the target number of buckets is reached.
The final values produced by this aggregation are approximate. Each bucket's
min value is used as its key in the histogram. Furthermore, buckets are merged
based on their centroids and not their bounds. So it is possible that adjacent
buckets will overlap after reduction. Because each bucket's key is its min,
this overlap is not shown in the final histogram. However, when such overlap
occurs, we set the key of the bucket with the larger centroid to the midpoint
between its minimum and the smaller bucket’s maximum:
`min[large] = (min[large] + max[small]) / 2`. This heuristic is expected to
increases the accuracy of the clustering.
Nodes are unable to share centroids during the shard-level clustering phase. In
the future, resolving https://github.com/elastic/elasticsearch/issues/50863
would let us solve this issue.
It doesn’t make sense for this aggregation to support the `min_doc_count`
parameter, since clusters are determined dynamically. The `order` parameter is
not supported here to keep this large PR from becoming too complex.
Co-authored-by: James Dorfman <jamesdorfman@users.noreply.github.com>
The main changes are:
1. Catch the `NamedObjectNotFoundException` when parsing aggregation
type, and then throw a `ParsingException` with clear error message with hint.
2. Add a unit test method: AggregatorFactoriesTests#testInvalidType().
Closes#58146.
Co-authored-by: bellengao <gbl_long@163.com>
It is possible for the source document to have an empty string value
for a field that is mapped as numeric. We should treat those as missing
values and avoid throwing an assertion error.
Backport of #58541
This changes the default value for the results field of inference
applied on models that are trained via a data frame analytics job.
Previously, the results field default was `predicted_value`. This
commit makes it the same as in the training job itself. The new
default field is `<dependent_variable>_prediction`. Apart from
making inference consistent with the training job the model came
from, it is helpful to preserve the dependent variable name
by default as it provides some context to the user that may
avoid confusion as to which model results came from.
Backport of #58538
* Add acm mapping to APM for beats
* Add root mapping for APM
* Add sourcemap mapping to APM
* Fix missing properties
* Fix a second missing properties
* Add request property to acm
* Remove root and sourcemap per review
Co-authored-by: Mike Place <mike.place@elastic.co>
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Add the ability to get a custom value while specifying a default and use it throughout the
codebase to get rid of the `null` edge case and shorten the code a little.
Przemysław Witek
Andrei Stefan
Yannick Welsch
David Turner
David Kyle
Dario Gieselaar
Yang Wang
Tim Vernum
Lee Hinman
Dan Hermann
Benjamin Trent
Martijn van Groningen
Julie Tibshirani
David Roberts
Rene Groeschke
Przemyslaw Gomulka
Tanguy Leroux
Costin Leau
Igor Motov
Dimitris Athanasiou
James Baiera
Henning Andersen
Jason Tedor
Nik Everett
Chris Roberson
Armin Braun
Hendrik Muhs