This commit causes negative TimeValues, other than -1 which is sometimes used as
a sentinel value, to be rejected during parsing.
Also introduces a hack to allow ILM to load policies which were written to the
cluster state with a negative min_age, treating those values as 0, which should
match the behavior of prior versions.
The NodesStatsRequest class uses a set of strings for its internal
serialization. This commit updates the class's interface so that we
no longer use hard-coded getters and setters, but rather
methods that add strings directly. For example, the old way of
adding "os" metrics to a request would be to call request.os(true).
The new way of doing this is to call request.addMetric("os").
For the time being, the canonical list of metrics is an enum in
NodesStatsRequest. This will eventually be replaced with something
pluggable.
This commit updates the template used for watch history indices with
the hidden index setting so that new indices will be created as hidden.
Relates #50251
Backport of #52962
This commit modifies the codebase so that our production code uses a
single instance of the IndexNameExpressionResolver class. This change
is being made in preparation for allowing name expression resolution
to be augmented by a plugin.
In order to remove some instances of IndexNameExpressionResolver, the
single instance is added as a parameter of Plugin#createComponents and
PersistentTaskPlugin#getPersistentTasksExecutor.
Backport of #52596
Add enterprise operation mode to properly map enterprise license.
Aslo refactor XPackLicenstate class to consolidate license status and mode checks.
This class has many sychronised methods to check basically three things:
* Minimum operation mode required
* Whether security is enabled
* Whether current license needs to be active
Depends on the actual feature, either 1, 2 or all of above checks are performed.
These are now consolidated in to 3 helper methods (2 of them are new).
The synchronization is pushed down to the helper methods so actual checking
methods no longer need to worry about it.
resolves: #51081
This commit removes the need for DeprecatedRoute and ReplacedRoute to
have an instance of a DeprecationLogger. Instead the RestController now
has a DeprecationLogger that will be used for all deprecated and
replaced route messages.
Relates #51950
Backport of #52278
This change adds support for the following new model_size_stats
fields:
- categorized_doc_count
- total_category_count
- frequent_category_count
- rare_category_count
- dead_category_count
- categorization_status
Backport of #51879
This commit changes how RestHandlers are registered with the
RestController so that a RestHandler no longer needs to register itself
with the RestController. Instead the RestHandler interface has new
methods which when called provide information about the routes
(method and path combinations) that are handled by the handler
including any deprecated and/or replaced combinations.
This change also makes the publication of RestHandlers safe since they
no longer publish a reference to themselves within their constructors.
Closes#51622
Co-authored-by: Jason Tedor <jason@tedor.me>
Backport of #51950
Adds a secure and reloadable SECURE_AUTH_PASSWORD setting to allow keystore entries in the form "xpack.monitoring.exporters.*.auth.secure_password" to securely supply passwords for monitoring HTTP exporters. Also deprecates the insecure `AUTH_PASSWORD` setting.
While we use `== false` as a more visible form of boolean negation
(instead of `!`), the true case is implied and the true value does not
need to explicitly checked. This commit converts cases that have slipped
into the code checking for `== true`.
* Rename ILM history index enablement setting
The previous setting was `index.lifecycle.history_index_enabled`, this commit changes it to
`indices.lifecycle.history_index_enabled` to indicate this is not an index-level setting (it's node
level).
The enterprise license type must have "max_resource_units" and may not
have "max_nodes".
This change adds support for this new field, validation that the field
is present if-and-only-if the license is enterprise and bumps the
license version number to reflect the new field.
Includes a BWC layer to return "max_nodes: ${max_resource_units}" in
the GET license API.
Backport of: #50735
* Add ILM histore store index (#50287)
* Add ILM histore store index
This commit adds an ILM history store that tracks the lifecycle
execution state as an index progresses through its ILM policy. ILM
history documents store output similar to what the ILM explain API
returns.
An example document with ALL fields (not all documents will have all
fields) would look like:
```json
{
"@timestamp": 1203012389,
"policy": "my-ilm-policy",
"index": "index-2019.1.1-000023",
"index_age":123120,
"success": true,
"state": {
"phase": "warm",
"action": "allocate",
"step": "ERROR",
"failed_step": "update-settings",
"is_auto-retryable_error": true,
"creation_date": 12389012039,
"phase_time": 12908389120,
"action_time": 1283901209,
"step_time": 123904107140,
"phase_definition": "{\"policy\":\"ilm-history-ilm-policy\",\"phase_definition\":{\"min_age\":\"0ms\",\"actions\":{\"rollover\":{\"max_size\":\"50gb\",\"max_age\":\"30d\"}}},\"version\":1,\"modified_date_in_millis\":1576517253463}",
"step_info": "{... etc step info here as json ...}"
},
"error_details": "java.lang.RuntimeException: etc\n\tcaused by:etc etc etc full stacktrace"
}
```
These documents go into the `ilm-history-1-00000N` index to provide an
audit trail of the operations ILM has performed.
This history storage is enabled by default but can be disabled by setting
`index.lifecycle.history_index_enabled` to `false.`
Resolves#49180
* Make ILMHistoryStore.putAsync truly async (#50403)
This moves the `putAsync` method in `ILMHistoryStore` never to block.
Previously due to the way that the `BulkProcessor` works, it was possible
for `BulkProcessor#add` to block executing a bulk request. This was bad
as we may be adding things to the history store in cluster state update
threads.
This also moves the index creation to be done prior to the bulk request
execution, rather than being checked every time an operation was added
to the queue. This lessens the chance of the index being created, then
deleted (by some external force), and then recreated via a bulk indexing
request.
Resolves#50353
Today the HTTP exporter settings without the exporter type having been
configured to HTTP. When it is time to initialize the exporter, we can
blow up. Since this initialization happens on the cluster state applier
thread, it is quite problematic that we do not reject settings updates
where the type is not configured to HTTP, but there are HTTP exporter
settings configured. This commit addresses this by validating that the
exporter type is not only set, but is set to HTTP.
Backport of #48277
Otherwise integration tests may fail if the monitoring interval is low:
```
[2019-10-21T09:57:25,527][ERROR][o.e.b.ElasticsearchUncaughtExceptionHandler] [integTest-0] fatal error in thread [elasticsearch[integTest-0][generic][T#4]], exiting
java.lang.AssertionError: initial cluster state not set yet
at org.elasticsearch.cluster.service.ClusterApplierService.state(ClusterApplierService.java:208) ~[elasticsearch-7.6.0-SNAPSHOT.jar:7.6.0-SNAPSHOT]
at org.elasticsearch.cluster.service.ClusterService.state(ClusterService.java:125) ~[elasticsearch-7.6.0-SNAPSHOT.jar:7.6.0-SNAPSHOT]
at org.elasticsearch.xpack.monitoring.MonitoringService$MonitoringExecution$1.doRun(MonitoringService.java:231) ~[?:?]
at org.elasticsearch.common.util.concurrent.AbstractRunnable.run(AbstractRunnable.java:37) ~[elasticsearch-7.6.0-SNAPSHOT.jar:7.6.0-SNAPSHOT]
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:515) ~[?:?]
at java.util.concurrent.FutureTask.run(FutureTask.java:264) ~[?:?]
at org.elasticsearch.common.util.concurrent.ThreadContext$ContextPreservingRunnable.run(ThreadContext.java:703) ~[elasticsearch-7.6.0-SNAPSHOT.jar:7.6.0-SNAPSHOT]
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) ~[?:?]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) ~[?:?]
at java.lang.Thread.run(Thread.java:835) [?:?]
```
I ran into this when lowering the monitoring interval when investigating
enrich monitoring test: #48258
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
The `HttpExportBulk` exporter is using a lot more memory than it needs to
by allocating buffers for serialization and IO:
* Remove copying of all bytes when flushing, instead use the stream wrapper
* Remove copying step turning the BAOS into a `byte[]`
* This also avoids the allocation of a single huge `byte[]` and instead makes use of the internal paging logic of the `BytesStreamOutput`
* Don't allocate a new BAOS for every document, just keep appending to a single BAOS
* Add ingest info to Cluster Stats (#48485)
This commit enhances the ClusterStatsNodes response to include global
processor usage stats on a per-processor basis.
example output:
```
...
"processor_stats": {
"gsub": {
"count": 0,
"failed": 0
"current": 0
"time_in_millis": 0
},
"script": {
"count": 0,
"failed": 0
"current": 0,
"time_in_millis": 0
}
}
...
```
The purpose for this enhancement is to make it easier to collect stats on how specific processors are being used across the cluster beyond the current per-node usage statistics that currently exist in node stats.
Closes#46146.
* fix BWC of ingest stats
The introduction of processor types into IngestStats had a bug.
It was set to `null` and set as the key to the map. This would
throw a NPE. This commit resolves this by setting all the processor
types from previous versions that are not serializing it out to
`_NOT_AVAILABLE`.
If a cluster sending monitoring data is unhealthy and triggers an
alert, then stops sending data the following exception [1] can occur.
This exception stops the current Watch and the behavior is actually
correct in part due to the exception. Simply fixing the exception
introduces some incorrect behavior. Now that the Watch does not
error in the this case, it will result in an incorrectly "resolved"
alert. The fix here is two parts a) fix the exception b) fix the
following incorrect behavior.
a) fixing the exception is as easy as checking the size of the
array before accessing it.
b) fixing the following incorrect behavior is a bit more intrusive
- Note - the UI depends on the success/met state for each condition
to determine an "OK" or "FIRING"
In this scenario, where an unhealthy cluster triggers an alert and
then goes silent, it should keep "FIRING" until it hears back that
the cluster is green. To keep the Watch "FIRING" either the index
action or the email action needs to fire. Since the Watch is neither
a "new" alert or a "resolved" alert, we do not want to keep sending
an email (that would be non-passive too). Without completely changing
the logic of how an alert is resolved allowing the index action to
take place would result in the alert being resolved. Since we can
not keep "FIRING" either the email or index action (since we don't
want to resolve the alert nor re-write the logic for alert resolution),
we will introduce a 3rd action. A logging action that WILL fire when
the cluster is unhealthy. Specifically will fire when there is an
unresolved alert and it can not find the cluster state.
This logging action is logged at debug, so it should be noticed much.
This logging action serves as an 'anchor' for the UI to keep the state
in an a "FIRING" status until the alert is resolved.
This presents a possible scenario where a cluster starts firing,
then goes completely silent forever, the Watch will be "FIRING"
forever. This is an edge case that already exists in some scenarios
and requires manual intervention to remove that Watch.
This changes changes to use a template-like method to populate the
version_created for the default monitoring watches. The version is
set to 7.5 since that is where this is first introduced.
Fixes#43184
This commit lifts the validation of the monitoring hosts setting into
the setting itself, rather than when the setting is used. This prevents
a scenario where an invalid value for the setting is accepted, but then
later fails while applying a cluster state with the invalid setting.
This change also slightly modifies the stats response,
so that is can easier consumer by monitoring and other
users. (coordinators stats are now in a list instead of
a map and has an additional field for the node id)
Relates to #32789
This commit renames the ILM package from indexlifecycle to ilm. We have
all come to know index lifecycle management as ILM, the APIs and
settings use ilm, and it would be nice of the package did too. This
commit makes that change.
We often start testing with early access versions of new Java
versions and this have caused minor issues in our tests
(i.e. #43141) because the version string that the JVM reports
cannot be parsed as it ends with the string -ea.
This commit changes how we parse and compare Java versions to
allow correct parsing and comparison of the output of java.version
system property that might include an additional alphanumeric
part after the version numbers
(see [JEP 223[(https://openjdk.java.net/jeps/223)). In short it
handles a version number part, like before, but additionally a
PRE part that matches ([a-zA-Z0-9]+).
It also changes a number of tests that would attempt to parse
java.specification.version in order to get the full version
of Java. java.specification.version only contains the major
version and is thus inappropriate when trying to compare against
a version that might contain a minor, patch or an early access
part. We know parse java.version that can be consistently
parsed.
Resolves#43141
This commit converts all remaining ActionType response classes to
writeable in xpack core. It also converts a few from server which were
used by xpack core.
relates #34389
This commit converts the request and response classes for broadcast
actions to implement ctors for Writeable.Reader and forces all future
implementations to implement the same.
relates #34389
This commit moves the Supplier variant of HandledTransportAction to have
a different ordering than the Writeable.Reader variant. The Supplier
version is used for the legacy Streamable, and currently having the
location of the Writeable.Reader vs Supplier in the same place forces
using casts of Writeable.Reader to select the correct super constructor.
This change in ordering allows easier migration to Writeable.Reader.
relates #34389
* Return 0 for negative "free" and "total" memory reported by the OS
We've had a situation where the MX bean reported negative values for the
free memory of the OS, in those rare cases we want to return a value of
0 rather than blowing up later down the pipeline.
In the event that there is a serialization or creation error with regard
to memory use, this adds asserts so the failure will occur as soon as
possible and give us a better location for investigation.
Resolves#42157
* Fix test passing in invalid memory value
* Fix another test passing in invalid memory value
* Also change mem check in MachineLearning.machineMemoryFromStats
* Add background documentation for why we prevent negative return values
* Clarify comment a bit more
The description field of xpack featuresets is optionally part of the
xpack info api, when using the verbose flag. However, this information
is unnecessary, as it is better left for documentation (and the existing
descriptions describe anything meaningful). This commit removes the
description field from feature sets.
This commit fixes the version parsing in various tests. The issue here is that
the parsing was relying on java.version. However, java.version can contain
additional characters such as -ea for early access builds. See JEP 233:
Name Syntax
------------------------------ --------------
java.version $VNUM(\-$PRE)?
java.runtime.version $VSTR
java.vm.version $VSTR
java.specification.version $VNUM
java.vm.specification.version $VNUM
Instead, we want java.specification.version.
This commit updates the default ciphers and TLS protocols that are used
when the runtime JDK supports them. New cipher support has been
introduced in JDK 11 and 12 along with performance fixes for AES GCM.
The ciphers are ordered with PFS ciphers being most preferred, then
AEAD ciphers, and finally those with mainstream hardware support. When
available stronger encryption is preferred for a given cipher.
This is a backport of #41385 and #41808. There are known JDK bugs with
TLSv1.3 that have been fixed in various versions. These are:
1. The JDK's bundled HttpsServer will endless loop under JDK11 and JDK
12.0 (Fixed in 12.0.1) based on the way the Apache HttpClient performs
a close (half close).
2. In all versions of JDK 11 and 12, the HttpsServer will endless loop
when certificates are not trusted or another handshake error occurs. An
email has been sent to the openjdk security-dev list and #38646 is open
to track this.
3. In JDK 11.0.2 and prior there is a race condition with session
resumption that leads to handshake errors when multiple concurrent
handshakes are going on between the same client and server. This bug
does not appear when client authentication is in use. This is
JDK-8213202, which was fixed in 11.0.3 and 12.0.
4. In JDK 11.0.2 and prior there is a bug where resumed TLS sessions do
not retain peer certificate information. This is JDK-8212885.
The way these issues are addressed is that the current java version is
checked and used to determine the supported protocols for tests that
provoke these issues.
Stuart Tettemer
Gordon Brown
William Brafford
Jason Tedor
Dan Hermann
Jay Modi
Yang Wang
Martijn van Groningen
David Roberts
Adrien Grand
Ryan Ernst
Lee Hinman
Tim Vernum
Rory Hunter
Armin Braun
Tal Levy
Jake Landis
Przemysław Witek
Ioannis Kakavas
Ryan Ernst
Mark Vieira