If a watch is not active, it should still be executed, if it is called
via the execute watch API.
This commit adds an additional method to the execution context to check
for this, which returns true for a manual execution context but checks
the watch status for the triggered one.
Original commit: elastic/x-pack-elasticsearch@18f3f9e84b
This commit fixes the Javadoc build for MonitoringTemplateUtils after
changes to core removed the string and bytes methods from
XContentBuilder.
Original commit: elastic/x-pack-elasticsearch@49f3b95b22
This ensures that the per watch stats in the trigger service are
properly cleared, when execution is paused.
Original commit: elastic/x-pack-elasticsearch@f5119e4072
Add realm name to all authz audit events: accessDenied, accessGranted,
runAsDenied and runAsGranted.
These event types receive the following attributes: realm,
run_by_realm and run_as_realm to go along with with the existing
attributes: principal, run_by_principal and run_as_principal. The
'effective realm name' (run_as_realm or run_by_realm) is certainly
filterable by ignore policies.
Original commit: elastic/x-pack-elasticsearch@cb3801e197
Audit trail filter policies can now be updated by the cluster update
settings API. Previously, policies were static inside the conf file.
This is helpful because, in practice, coming up with a reasonable
policy set is an iterative process, adding and changing policies to
shave off yet another pesky audit event.
Original commit: elastic/x-pack-elasticsearch@e8a670c427
This commit adds a Samba4 test fixture that acts as a domain controller
and has the same contents as the cloud active directory instance that
we previously used for tests.
The tests also support reading information from environment variables
so that they can be run against a real active directory instance in our
CI builds.
In addition, this commit also fixes a few issues that surfaced when
making this change. The first is a change in the base DN that is
searched when performing down-level authentication. The base DN is
now the configuration object instead of the domain DN. This change was
required due to the original producing unnecessary referrals, which we
cannot easily follow when running against this test figure. Referrals
cannot easily be followed as they are returned by the ldap server with
an unresolvable DNS name unless the host points to the samba4 instance
for DNS. The port returned in the referral url is the one samba is bound
to, which differs from the port that is forwarded to the host by the
test fixture.
The other issue that is resolved by this change is the addition of
settings that allow specifying non-standard ports for active directory.
This is needed for down-level authentication as we may need to query
the regular port of active directory instead of the global catalog
port as the configuration object is not replicated to the global
catalog.
relates elastic/x-pack-elasticsearch#185
Relates elastic/x-pack-elasticsearch#3800
Original commit: elastic/x-pack-elasticsearch@883c742fba
This stops providing the "hkey" (hash) of the license now that the
Monitoring UI no longer uses it (6.3+).
Original commit: elastic/x-pack-elasticsearch@235402fa92
This adds an indicator to Monitoring's portion of X-Pack usage whether or
not collection is actually enabled. It's no longer enough to have an
exporter defined by default to know if monitoring is actually running.
Original commit: elastic/x-pack-elasticsearch@b2eb881d61
This adds a minimum compatible version to the model snapshot.
Nodes with a version earlier than that version cannot read
that model snapshot. Thus, such jobs are not assigned to
incompatible nodes.
relates elastic/x-pack-elasticsearch#4077
Original commit: elastic/x-pack-elasticsearch@2ffa6adce0
This adds back usage stats by pickybacking on the watcher stats, which
are already running distributed in order to collect and merge watcher
statistics.
In order to be able to track statistics, we need to add information for
each watch in an in-memory data structure that is processed whenever a
usage request is coming in. This processing creates a number of counters
for each node, which then are merged together in the usage stats.
relates elastic/x-pack-elasticsearch#4071
Original commit: elastic/x-pack-elasticsearch@c8bfed288f
The toXContent serialization of the transform input was broken, which
could lead to the bad case that a watch could be stored with an invalid
toXContent serialization, that could not be read again, when the watch
should either be executed or even just returned by the Get watch API.
relates elastic/x-pack-elasticsearch#4049
Original commit: elastic/x-pack-elasticsearch@f06ad768b8
`PrintWriter#println` doesn't pay attention to the terminal
configuration that we specify so it breaks tests on Windows. If we
instead always use `PrintWriter#print('\n')` then the tests work
properly on windows *and* the CLI actually works properly on Windows.
relates elastic/x-pack-elasticsearch#4109
Original commit: elastic/x-pack-elasticsearch@ac17e691c8
* Decouple XContentBuilder from BytesReference
This commit handles the removal of all mentions of BytesReference from
XContentBuilder. This is needed so that we can completely decouple the XContent
code and move it into its own dependency.
This is the x-pack side of https://github.com/elastic/elasticsearch/pull/28972
Original commit: elastic/x-pack-elasticsearch@8ba2e97b26
This commit adjusts the invocation of the main response constructor as
these were changed upstream to remove a parameter.
Original commit: elastic/x-pack-elasticsearch@846b33c9e9
This is related to elastic/x-pack-elasticsearch#3877. This commit adds a paramer type to the
start_trial api. This parameter allows the user to pass a type (trial,
gold, or platinum) of license that will be generated. No matter what
type is choosen, you can only generate one per major version.
Original commit: elastic/x-pack-elasticsearch@b42234cbb5
This removes the check for 'requires_keystore' from the plugin output,
which was removed unexpectedly to this test.
Original commit: elastic/x-pack-elasticsearch@80c5c03e20
This commit replaces the usage of Lucene IOUtils with Elasticsearch
IOUtils, the former of which is now forbidden.
Original commit: elastic/x-pack-elasticsearch@8e0554001f
The SQL CLI was being a bit cavalier about `null`, `ctrl-c`, and
`ctrl-d` while reading passwords to the point where it'd halt with
an exception if the user hit `ctrl-d` while typing a password. This
changes it so that the CLI will instead shut down if the user
`ctrl-c`s or `ctrl-d`s while on the password prompt with an
ENOPERM error code.
This also fixes a packaging test failure I caused by a copy and paste
error where the CLI was always enforcing things as though it was reading
a password all the time. This error was causing packaging test failures.
Original commit: elastic/x-pack-elasticsearch@a882c50fc7
This is related to elastic/x-pack-elasticsearch#3877. This commit adds a route /start_basic that
will self generate a basic license. The only validation that is
performed is to check that you do not already have a basic license
installed. Additionally, if you lose features from switching to a basic
license, you must acknowledge the changes.
Original commit: elastic/x-pack-elasticsearch@7b8eeb50b1
This commit adapts the X-Pack packaging tests to the change in
Elasticsearch to create the keystore on package installation.
Original commit: elastic/x-pack-elasticsearch@e86c98fa83
A small bug in the `IndexStatsCollector` can potentially returns
statistics for newly created indices that does not exist yet in the
collector's `ClusterState` local instance.
It happens because an instance of the current `ClusterState` is
captured and passed to all the collectors before they are executed (so
that they all share the same view of the state of the cluster). On
some clusters, if an index is created after the `ClusterState` is
captured but before the `IndicesStatsRequest` is executed then it can
appears in the index stats but have no corresponding entry in the
local cluster state.
This commit changes the IndexStatsCollector so that it only return
statistics for indices that already exist in the cluster state. This
way a consistent view is possible between indices/index/shard stats.
Original commit: elastic/x-pack-elasticsearch@da173ae0b0
SslConfiguration can depend on SecureSettings, so it must be
constructed during the correct lifecycle phase.
For PkiRealmBootstrapCheck, moved the construction of SslConfiguration
objets into the constructor rather than the check method
Original commit: elastic/x-pack-elasticsearch@1a4d147216
This is related to elastic/x-pack-elasticsearch#4095. That test uses the a basic license in a test
of the route put license. Occasionally, that license is extended due to
recent work related to indefinite basic licenses before the test
assertions can be performed. This commit changes the test to use a gold
license.
Original commit: elastic/x-pack-elasticsearch@bf2550f044
This is related to elastic/x-pack-elasticsearch#3877. It modifies self-generated basic licenses to
(practically) never expire. Specifically, self-generated basic licenses
will be set with an expiration date 1 year before Long.MAX_VALUE
Additionally, basic licenses with a different expiration date will be
replaced with a new self-generated basic licenses at startup.
Original commit: elastic/x-pack-elasticsearch@de8b343089
If the Assertion Consumer Service URL already contained query
parameters, we would incorrectly append an addtional '?' rather than
adding the SAML parameters to the end with '&'
Original commit: elastic/x-pack-elasticsearch@60b6a977d8
This properly registers the `XPackFeatureSetUsage` for Logstash and
it tests it by invoking the Usage API in a Monitoring QA test.
Without those being properly registered, the test will consistently fail.
Original commit: elastic/x-pack-elasticsearch@2e8f2376fd
We had a Usage class before, but weren't registering it with XPack.
Would be nice to add more usage info in the future (like the running
jobs on each node), but unclear the best way to do it since we'd need
to filter through the list of allocated tasks.
Original commit: elastic/x-pack-elasticsearch@5207d2758b
Up to now a job update that reduces the model memory limit
was not allowed. However, there could definitely be cases
where reducing the limit is necessary and reasonable.
This commit makes it possible to decrease the limit as long
as it does not go below the current memory usage. We obtain
the latter from the model size stats.
The conditions under which updating the model_memory_limit
is not allowed are now:
- when the job is open
- latest model_size_stats.model_bytes < new value
relates elastic/x-pack-elasticsearch#2461
Original commit: elastic/x-pack-elasticsearch@5b35923590
This removes the readFrom and writeTo methods from XContentType, instead using
the more generic `readEnum` and `writeEnum` methods. Luckily they are both
encoded exactly the same way, so there is no compatibility layer needed for
backwards compatibility.
This is the x-pack side of https://github.com/elastic/elasticsearch/pull/28927
Original commit: elastic/x-pack-elasticsearch@f1c0928490
This commit fixes the Javadocs for the class o.e.x.r.j.RollupIndexer as
these Javadocs were referring to instance methods on the class
incorrectly (using a this prefix).
Original commit: elastic/x-pack-elasticsearch@fdcc7338f9
This wraps the stream (`.streamInput()`) that is passed to many of the
`createParser` instances in the enclosing (or a new) try-with-resources block.
This ensures the `BytesReference.streamInput()` is closed.
Relates to elastic/x-pack-elasticsearch#28504
Original commit: elastic/x-pack-elasticsearch@7546e3b4d4
This moves the `payload = null;` statement to above the asynchronous
HTTP call. This helps to avoid a race condition relative to `doClose`
asserting that it is `null`.
This is only a realistic situation during a shutdown situation because
the thread responds immediately before it can be nullified and freeable,
which is not a realistic scenario in any other situation.
Original commit: elastic/x-pack-elasticsearch@eb3a6ff118
Remove functions without a backing matrix agg
MatrixAgg works across multiple fields and exposing it directly in SQL
does not work. Instead isolated functions are exposed which get folded
and optimized into one matrix agg per field. Thus not all matrix
functions can be exposed in SQL, at least at this time.
Instead of depending on the plugin directly, depend on the plugin client
jar (matrix-agg-client)
Remove outdated test
Original commit: elastic/x-pack-elasticsearch@ec9b31bf59
The type of BUFFER_LENGTH needs to be an integer (not NULL) and unsigned
indicate the opposite of signed.
Change isSigned from Object to primitive
Since all the consumer of isSigned expect a primitive, an Object is just causing troubles by being null.
Update description table
Original commit: elastic/x-pack-elasticsearch@8e1960bdb5
Use AggregatorTestCase's `newIndexSearcher()` instead. Lucene's
version can randomly wrap with IndexReader with things we can't handle
like ParallelCompositeReader
Original commit: elastic/x-pack-elasticsearch@b4c0e9a601
The test job helper randomizes the index name with 1-10 characters,
which can lead to randomized index names to overlap and show fewer
caps than the test expects.
The solution is to just use index names "0"-"24" to ensure none
of the names overlap, and thus the caps don't overlap.
Original commit: elastic/x-pack-elasticsearch@74a6d13213
The arrangement of the final latch meant the latch could countdown,
then the test ends before the await() triggers which caused the
thread to be interrupted and fail. The whole arrangement was incorrect
anyhow.
We need to await the latch before sending the search response as before,
but move the final atomicBoolean to the second time the persistent
task status is updated which is a signal that we are done
and can end the test
If these tests continues to be flaky, we should probably just remove them.
The headers are tested elsewhere and not required to be tested in this
context.
Original commit: elastic/x-pack-elasticsearch@0cf5603972
Analysis limits contain settings that affect the resources
used by ML jobs. Those limits always take place. However,
explictly setting them is not required as they have reasonable
defaults. For a long time those defaults lived on the c++ side.
The job could just not have any explicit limits and that meant
defaults would be used at the c++ side. This has the disadvantage
that it is not obvious to the users what these settings are set to.
Additionally, users might not be aware of the settings existence.
On top of that, since 6.1, the default model_memory_limit was lowered
from 4GB to 1GB. For BWC, this meant that jobs where model_memory_limit
is null, the default of 4GB applies. Jobs that were created from 6.1
onwards, contain an explicit setting for model_memory_limit, which is
1GB unless the user sets it differently. This adds additional confusion.
This commit makes analysis limits an always explicit setting on the job.
Regardless of whether the user sets custom limits or not, the job object
(and response) will contain the full analysis limits values.
The possibilities for interpretation of missing values are:
- the entire analysis_limits is null: this may only happen for jobs
created prior to 6.1. Thus we set the model_memory_limit to 4GB.
- analysis_limits are non-null but model_memory_limit is: this also
may only happen for jobs prior to 6.1. Again, we set memory limit to
4GB.
- model_memory_limit is non-null: this either means the user set an
explicit value or the job was created from 6.1 onwards and it has
the explicit default of 1GB. We simply keep the given value.
For categorization_examples_limit the default has always been 4, so
we fill that in when it's missing.
Finally, note that we still need to handle potential null values
for the situation of a mixed cluster.
Original commit: elastic/x-pack-elasticsearch@5b6994ef75
I'm really really sad to be removing the cli-fixture but I've had
trouble with it leaking recently it is pretty slow. Beyond that, we'd
prefer that our test fixture only fixture things that are external
depndencies.
So, yeah, I'm removing it. So we get faster tests and no chance of
leaking processes. We lose some "realness" in the tests. Instead of
interacting with the CLI like a real user we embed it in the test
process. That means we don't test the forking, we don't test the
executable jar, and we don't test the jLine console detection stuff. On
the other hand we were kind of forcing the jLine console detection stuff
in a funky way with the fixture anyway. And we test the executable jar
in the packaging tests. And that'll have to do.
I haven't renamed `RemoteCli` because it'd bloat this commit with
mechanical changes that'd make it hard to review. I'll rename it in a
followup commit.
This also updates jLine so we can disable blinking to matching
parentheses during testing. I have no clue why, but this wasn't
happening when we used the fixture. The trouble with the blinking is
that it is based on *time* so it slows things down. Worse, it works
inconsistently! Sometimes it spits out sensible ascii codes and
sometimes it, well, spits out weird garbage. When you use it in person
it works fine though. So we keep it on when not testing.
Cleans up some redundancy in when testing CLI errors. Less copy and
paste good.
I was tempted to disable the xterm emulation entirely while working on
this because upgrading jLine changed a few things and it was a real pain
to update. But If we turned that off then we'd have *nothing* testing
the colors and such. That'd be a shame because we use color in the
output to commicate stuff. I like it so I don't want to break it.
While I was there, I replaces the cli connector's `PrintWriter` with a
`BufferedWriter`. The `PrintWriter` was kind of a trap because `println`
would fail to work properly on windows because we force the terminal
into xterm mode and it doesn't know what to do with windows line
endings. Windows.....
Additionally I fixed a race condition between disabling echo when
reading passwords and fast writers. We were disabling the echo shortly
after sending the prompt. A fast enough writer could send us text before
the echo disable kicked in. Now I delegate to `LineReader#readLine`
with a special echo mask that disables echo. This is both easier to test
and doesn't seem to have the race condition. This race condition was
failing the tests because they are so much faster now. Yay!
Original commit: elastic/x-pack-elasticsearch@d0ec027396
Add basic support for catalog parameters in SYS COLUMN
Pass an empty string instead of a null inside the prepared statement
Don't use pattern for catalog in getColumns
Original commit: elastic/x-pack-elasticsearch@17e9e851a0
* foo.bar can mean either: no table field foo.bar or table foo, field bar
The resolution rule has been extended to include the latter case as
fallback.
* Always check field ambiguity
* Since field with dots can create confusion (when not qualified), the
analyzer always now always checks for both qualified and not-qualified
fields and throws an ambiguity message with the potential candidates.
This forces the use of qualifiers or quotes to better indicate the
desired field.
* Add example of aliasing the table to remove ambiguity
Original commit: elastic/x-pack-elasticsearch@8b70b9c4ee
Incorrect latch caused this test to run slowly (until the await
finished), and could probably cause failure due to incorrect ordering
Original commit: elastic/x-pack-elasticsearch@ebeb8655da
The latches were not placed correctly, allowing the aborts
to be set before we checked the state for Indexing the first time.
This was due to using the DelayingIndexer's built in latch, which
isn't placed quite where we needed it.
Original commit: elastic/x-pack-elasticsearch@590cfa07b0
* Pass InputStream when creating XContent parser
Rather than passing the raw `BytesReference` in when creating the xcontent
parser, this passes the StreamInput (which is an InputStream), this allows us to
decouple XContent from BytesReference.
This is the x-pack side of https://github.com/elastic/elasticsearch/pull/28754
* Use the streamInput variant, not sourceAsString
Original commit: elastic/x-pack-elasticsearch@dd5d8b1654
This adds a new Rollup module to XPack, which allows users to configure periodic "rollup jobs" to pre-aggregate data. That data is then available later for search through a special RollupSearch API, which mimics the DSL and functionality of regular search.
Rollups are used to drastically reduce the on-disk footprint of metric-based data (e.g. timestamped document with numeric and keyword fields). It can also be used to speed up aggregations over large datasets, since the rolled data will be considerably smaller and fewer documents to search.
The PR adds seven new endpoints to interact with Rollups; create/get/delete job, start/stop job, a capabilities API similar to field-caps, and a Rollup-enabled search.
Original commit: elastic/x-pack-elasticsearch@dcde91aacf
The watcher thread pool is scaled by the number of CPUs and has by
default up to 5x the number of cores. This is needed because we assumme
I/O based waiting workloads for watcher. However if the node is not a
data node, there will not be any execution of watches with the exception
of a user calling the execute watch API on that node.
This means, we can get away with just one thread, so that there is no
need for the JVM to manage more threads on master/client or ingest only
nodes.
Original commit: elastic/x-pack-elasticsearch@b5899401d3
This adds a new setting, `xpack.monitoring.collection.enabled`, and
disables it by default (`false`).
Original commit: elastic/x-pack-elasticsearch@4b3a5a1161
Although not frequently used in production, we make heavy use of the
FileRolesStore within integration tests. This change adds a little bit
more logging at INFO level when the roles.yml file is (re)loaded.
Original commit: elastic/x-pack-elasticsearch@bbacd46e28
The current toXContent serialization of a failed hipchat message writes
the same field called status twice and thus cannot be stored in the
watch history.
This commit ensures the field gets only written once.
relates elastic/x-pack-elasticsearch#3919
Original commit: elastic/x-pack-elasticsearch@fb499e8055
This change makes the IndexAuditTrail update mappings for the current
index even when indexing locally. This is needed in a couple of
scenarios; the first being upgrades from 5x to 6x where the document
type was changed and the second is when upgrading minor versions and
a new field has been introduced. A new field was introduced in 6.2.
Additionally, writing tests for the rolling upgrade revealed a bug
where the actual node name was never being set as it was using the name
key instead of the node.name key.
relates elastic/x-pack-elasticsearch#3901
relates elastic/x-pack-elasticsearch#3718
Original commit: elastic/x-pack-elasticsearch@7374a62ff1
This commit removes some outdated logic in the SecurityTestUtils class
for writing files and creating directories. A long, long time ago there
was a global cluster for tests that was used across suites and because
of this there were calls to delete files if they already existed. The
global cluster has been removed, so we no longer need the code that
deletes the content of a directory if it already exists.
Additionally, the file writing used in SecurityTestUtils did not use
atomic moves when possible and this commit changes the code such that a
temp file is written and we try to atomically move it to the correct
path; if atomic moves are not supported a regular move is performed.
relates elastic/x-pack-elasticsearch#3912
Original commit: elastic/x-pack-elasticsearch@973fcfe2e1
... yet support updates. This commit introduces a few changes of how
watches are put.
The GET Watch API will never return credentials like basic auth
passwords, but a placeholder instead now. If the watcher is enabled to
encrypt sensitive settings, then the original encrypted value is
returned otherwise a "::es_redacted::" place holder.
There have been several Put Watch API changes.
The API now internally uses the Update API and versioning. This has
several implications. First if no version is supplied, we assume an
initial creation. This will work as before, however if a credential is
marked as redacted we will reject storing the watch, so users do not
accidentally store the wrong watch.
The watch xcontent parser now has an additional methods to tell the
caller if redacted passwords have been found. Based on this information
an error can be thrown.
If the user now wants to store a watch that contains a password marked
as redacted, this password will not be part of the toXContent
representation of the watch and in combinatination with update request
the existing password will be merged in. If the encrypted password is
supplied this one will be stored.
The serialization for GetWatchResponse/PutWatchRequest has changed.
The version checks for this will be put into the 6.x branch.
The Watcher UI now needs specify the version, when it wants to store a
watch. This also prevents last-write-wins scenarios and is the reason
why the put/get watch response now contains the internal version.
relates elastic/x-pack-elasticsearch#3089
Original commit: elastic/x-pack-elasticsearch@bb63be9f79
This test recently failed and it appears that the cause was that
roles.yml was deleted while the cluster was still running.
This turns on logging for the FileRolesStore so that changes to file
based roles can traced more easily.
Original commit: elastic/x-pack-elasticsearch@fbce5a8027
* Additional settings for SAML NameID policy
We should not be populating SPNameQualifier by default as it is
intended to be used to specify an alternate SP EntityID rather than
our own. Some IdPs (ADFS) fail when presented with this value.
This commit
- makes the SPNameQualifier a setting that defaults to blank
- adds a setting for "AllowCreate"
- documents the above
Original commit: elastic/x-pack-elasticsearch@093557e88f
* [Tests] Ensure that Watcher templates are created before creating alias
The createWatcherIndicesOrAliases() method randomly created watcher
indices with or without aliases. On slow machines it is possible that
the indices get created before WatcherIndexTemplateRegistry put the
templates. When it happens, the indices will be created without the
right index.format value, preventing the WatcherService to start (as
it checks the index.format before starting, in case an upgrade is
required)
relates elastic/x-pack-elasticsearch#3965
Original commit: elastic/x-pack-elasticsearch@82946a2be0
Extend the SYS TABLES command to allow filtering by catalog and types
Add creation of EnumSet inside node tests
Handle EnumSet inside test for replaceChildren
Original commit: elastic/x-pack-elasticsearch@407ce7b006
jaymode
Tim Brooks
Alexander Reelsen
Jason Tedor
Tanguy Leroux
Albert Zaharovits
Albert Zaharovits
Chris Earle
Jay Modi
Chris Earle
Dimitris Athanasiou
Nik Everett
Lee Hinman
Yannick Welsch
Tim Vernum
David Roberts
Ioannis Kakavas
Zachary Tong
Shaunak Kashyap
Igor Motov
Costin Leau
polyfractal
David Kyle
Zachary Tong
Luca Cavanna
javanna
Tim Vernum
Martijn van Groningen
markharwood
Costin Leau