This change adds a `frozen` engine that allows lazily open a directory reader
on a read-only shard. The engine wraps general purpose searchers in a LazyDirectoryReader
that also allows to release and reset the underlying index readers after any and before
secondary search phases.
Relates to #34352
With this change, `Version` no longer carries information about the qualifier,
we still need a way to show the "display version" that does have both
qualifier and snapshot. This is now stored by the build and red from `META-INF`.
This is related to #29023. Additionally at other points we have
discussed a preference for removing the need to unnecessarily block
threads for opening new node connections. This commit lays the groudwork
for this by opening connections asynchronously at the transport level.
We still block, however, this work will make it possible to eventually
remove all blocking on new connections out of the TransportService
and Transport.
Today we allow the user to set the minimum size of a voting configuration. On
reflection we would rather this was simply '3' where possible, and we can use
the retirement API to control the removal of nodes more explicitly.
This change replaces the old reconfigurator setting with a new one,
`cluster.auto_shrink_voting_configuration`, which determines whether
Elasticsearch should automatically remove nodes from the voting configuration
or not.
When the engine is asked for historical operations, we check if some of the requested operations
are not yet refreshed and if so we refresh before returning the operations. The refresh check is
based on capturing the local checkpoint before each refresh and comparing that value to the one
requested when `newChangesSnapshot` was called. If the requested range is above the captured
local checkpoint we issue a refresh.
This can currently cause unneeded extra refreshes if the method is called concurrently which may cause unwanted degradation in indexing performance. This is especially relevant for CCR where we always ask for a range below the global checkpoint. That range is guaranteed to be below the local
checkpoint of the shard and one refresh is enough to serve multiple changes requests.
This commit fixes this by introducing a dedicated mutex to make sure the test for whether a refresh
is needed actually wait for concurrents for concurrent refreshes that were caused by another
change refresh.
Note that this is not a big change in semantics as refreshes are serialized by lucene anyway. I also
opted not to keep the synchronization to the changes snapshot request only even if in theory we
can apply it to all refreshes, not matter where they come from.
Currently we create a new netty event loop group for client connections
and all server profiles. Each new group creates new threads for io
processing. This means 2 * num of processors new threads for each group.
A single group should be able to handle all io processing (for the
transports). This also brings the netty module inline with what we do
for nio.
Additionally, this PR renames the worker threads to be the same for
netty and nio.
* Introduce property to set version qualifier
- VersionProperties.elasticsearch is now a string which can have qualifier
and snapshot too
- The Version class in the build no longer cares about snapshot and
qualifier.
Stop passing `Settings` to `AbstractComponent`'s ctor. This allows us to
stop passing around `Settings` in a *ton* of places. While this change
touches many files, it touches them all in fairly small, mechanical
ways, doing a few things per file:
1. Drop the `super(settings);` line on everything that extends
`AbstractComponent`.
2. Drop the `settings` argument to the ctor if it is no longer used.
3. If the file doesn't use `logger` then drop `extends
AbstractComponent` from it.
4. Clean up all compilation failure caused by the `settings` removal
and drop any now unused `settings` isntances and method arguments.
I've intentionally *not* removed the `settings` argument from a few
files:
1. TransportAction
2. AbstractLifecycleComponent
3. BaseRestHandler
These files don't *need* `settings` either, but this change is large
enough as is.
Relates to #34488
* NETWORKING: MockTransportService Wait for Close
* Make `MockTransportService` wait `30s` for close listeners to run before failing the assertion
* Closes#34990
Today when ESIntegTestCase starts some nodes it writes out the unicast hosts
files each time a node starts its transport service. This does mean that a
number of nodes can start and perform their first pinging round without any
unicast hosts which, if the timing is unlucky and a lot of nodes are all
started at the same time, can lead to a split brain as in #35052.
Prior to #33554 this was unlikely to happen since the MockUncasedHostsProvider
would always have yielded the existing hosts, so the timing would have to have
been implausibly unlucky. Since #33554, however, it's more likely because the
race occurs between the start of the first round of pinging and the writing of
the unicast hosts file. It is realistic that new nodes will be configured with
the existing nodes from startup, so this change reinstates that behaviour.
Closes#35052.
The java yaml test runner supports sending request headers, yet not all clients support headers. This commit makes sure that we enforce adding a skip section with feature "headers" whenever headers are used in a do section as part of a test. That decreases the chance for new tests to break client builds due to the missing skip section.
Closes#34650
This PR renames the CRUD APIS for ILM
GET _ilm/<policy>, _ilm -> _ilm/policy/<policy>, _ilm/policy
PUT _ilm/<policy> -> _ilm/policy/<policy>
DELETE _ilm/<policy> -> _ilm/policy/<policy>
closes#34929.
Drops the `Settings` member from `AbstractComponent`, moving it from the
base class on to the classes that use it. For the most part this is a
mechanical change that doesn't drop `Settings` accesses. The one
exception to this is naming threads where it switches from an invocation
that passes `Settings` and extracts the node name to one that explicitly
passes the node name.
This change doesn't drop the `Settings` argument from
`AbstractComponent`'s ctor because this change is big enough as is.
We'll do that in a follow up change.
This commit filters out usage of deprecated tzs by tests. These are
tested separately and should not require checking for warnings on any
test using random timezones.
closes#34188
Validation of test sections and suites consists of checking that the proper skip features sections are in place depending on the features used in tests.
The validation logic was previously only performed on do sections included in each test section, and the skip needed to be present in the same test section. What happens often though is that the skip is added to the setup section, or the teardown section.
This commit improves the validation of test suites by validating setup and teardown section first, then looking at each test section while still eventually reading the skip section from setup or teardown.
We are also making SkipSection, SetupSection, TearDownSection, ClientYamlTestSection and ClientYamlTestSuite immutable. Previously it was possible to utilize constants like SetupSection.EMPTY, which were modifiable and affect every other future users by modifiying them. This has been corrected.
Also, validation has been improved to cumulate errors so that all the errors from a suite will be listed at once.
Relates to #34735
This commit adds a new single value metric aggregation that calculates
the statistic called median absolute deviation, which is a measure of
variability that works on more types of data than standard deviation
Our calculation of MAD is approximated using t-digests. In the collect
phase, we collect each value visited into a t-digest. In the reduce
phase, we merge all value t-digests, then create a t-digest of
deviations using the first t-digest's median and centroids
Conflicts during the merge:
1. >=140 chars line length fixed for a lot of project files and warnings
for those files are no longer suppressed
2. Node name is removed from AbstractComponent, it’s no longer taken
from settings, but is explicitly passed as constructor argument and
there were quite a few new classes on zen2 branch that require this
change
3. TransportResponseHandler interface changed (new method added) and
Zen2 makes a lot of subclasses in tests
4. Deprecated way of obtaining logger was changed
Bulk Request in High level rest client should be consistent with what is
possible in Rest API, therefore should support global parameters. Global
parameters are passed in URL in Rest API.
Some parameters are mandatory - index, type - and would fail validation
if not provided before before the bulk is executed.
Optional parameters - routing, pipeline.
The usage of these should be consistent across sync/async execution,
bulk processor and BulkRequestBuilder
closes#26026
`AbstractComponent` is trouble because its name implies that
*everything* should extend from it. It *is* useful, but maybe too
broadly useful. The things it offers access too, the `Settings` instance
for the entire server and a logger are nice to have around, but not
really needed *everywhere*. The `Settings` instance especially adds a
fair bit of ceremony to testing without any value.
This removes the `nodeName` method from `AbstractComponent` so it is
more clear where we actually need the node name.
In order to remove Streamable from the codebase, Response objects need
to be read using the Writeable.Reader interface which this change
enables. This change enables the use of Writeable.Reader by adding the
`Action#getResponseReader` method. The default implementation simply
uses the existing `newResponse` method and the readFrom method. As
responses are migrated to the Writeable.Reader interface, Action
classes can be updated to throw an UnsupportedOperationException when
`newResponse` is called and override the `getResponseReader` method.
Relates #34389
This is a forward port of a change made to clean up backwards
compatibility for the rollup cleanups. It makes the version of each node
available very early on in test execution. The 6.x version of the change
used those versions to control the cleanup backwards compatibility but
that isn't needed in this branch. But having the versions around *is*
useful. So this makes them available.
Closes#34629
This is related to #30876. The AbstractSimpleTransportTestCase initiates
many tcp connections. There are normally over 1,000 connections in
TIME_WAIT at the end of the test. This is because every test opens at
least two different transports that connect to each other with 13
channel connection profiles. This commit modifies the default
connection profile used by this test to 6. One connection for each
type, except for REG which gets 2 connections.
The contains syntax was added in #30874 but the skips were not properly
put in place.
The java runner has the feature so the tests will run as part of the
build, but language clients will be able to support it at their own
pace.
We throw parsing exception when an unknown array is found, but we don't when an unknown top-level field is found. This commit makes sure that unsupported top-level fields are not ignored in a do section.
Closes#34651
#33708 introduced a strict deprecation mode that makes a REST request
fail if there is a warning header in the response returned by
Elasticsearch (usually a deprecation message signaling that a feature
or a field has been deprecated).
This change adds the strict deprecation mode into the REST integration
tests, and makes the tests fail if a deprecated feature is used. Also
any test using a deprecated feature has been modified to pass the build.
The YAML integration tests already analyzed HTTP warnings so they do
not use this mode, keeping their "expected vs actual" behavior.
In #34407, we supposed to clone the list of replicas of ReplicationGroup
when computing replication targets, but somehow we missed it. If we
don't clone the list, a WriteReplicationAction may use an old
ReplicationTargets which consists replicas which are removed from the
current list of replicas
Relates #34407Closes#33457
- Restrict visibility of Aggregators and Factories
- Move PipelineAggregatorBuilders up a level so it is consistent with
AggregatorBuilders
- Checkstyle line length fixes for a few classes
- Minor odds/ends (swapping to method references, formatting, etc)
We should delete a job by directly talking to the allocated
task and telling it to shutdown. Today we shut down a job
via the persistent task framework. This is not ideal because,
while the job has been removed from the persistent task
CS, the allocated task continues to live until it gets the
shutdown message.
This means a user can delete a job, immediately delete
the rollup index, and then see new documents appear in
the just-deleted index. This happens because the indexer
in the allocated task is still running and indexes a few
more documents before getting the shutdown command.
In this PR, the transport action is changed to a TransportTasksAction,
and we invoke onCancelled() directly on the matching job.
The race condition still exists after this PR (albeit less likely),
but this was a precursor to fixing the issue and a self-contained
chunk of code. A second PR will followup to fix the race itself.
Integrates the failure detectors with the Connection lifecycle, to fail nodes as soon as:
- a leader detects one of his followers disconnecting.
- a follower detects its leader disconnecting.
In some of our X-Pack REST tests we have to wait for pending tasks to
complete. We are now needing this functionality in ESRestTestCase for
the docs tests where we run against X-Pack features. This commit moves
the helper method that we have in X-Pack to ESRestTestCase, and removes
duplicate logic from waiting for rollup tasks to complete.
As master-eligible nodes join or leave the cluster we should give them votes or
take them away, in order to maintain the optimal level of fault-tolerance in
the system. #33924 introduced the `Reconfigurator` to calculate the optimal
configuration of the cluster, and in this change we add the plumbing needed to
actually perform the reconfigurations needed as the cluster grows or shrinks.
Since #34288, we might hit deadlock if the FollowTask has more fetchers
than writers. This can happen in the following scenario:
Suppose the leader has two operations [seq#0, seq#1]; the FollowTask has
two fetchers and one writer.
1. The FollowTask issues two concurrent fetch requests: {from_seq_no: 0,
num_ops:1} and {from_seq_no: 1, num_ops:1} to read seq#0 and seq#1
respectively.
2. The second request which fetches seq#1 completes before, and then it
triggers a write request containing only seq#1.
3. The primary of a follower fails after it has replicated seq#1 to
replicas.
4. Since the old primary did not respond, the FollowTask issues another
write request containing seq#1 (resend the previous write request).
5. The new primary has seq#1 already; thus it won't replicate seq#1 to
replicas but will wait for the global checkpoint to advance at least
seq#1.
The problem is that the FollowTask has only one writer and that writer
is waiting for seq#0 which won't be delivered until the writer completed.
This PR proposes to replicate existing operations with the old primary
term (instead of the current term) on the follower. In particular, when
the following primary detects that it has processed an process already,
it will look up the term of an existing operation with the same seq_no
in the Lucene index, then rewrite that operation with the old term
before replicating it to the following replicas. This approach is
wait-free but requires soft-deletes on the follower.
Relates #34288
With this commit we cleanup hand-coded duplicate checks in XContent
parsing. They were necessary previously but since we reconfigured the
underlying parser in #22073 and #22225, these checks are obsolete and
were also ineffective unless an undocumented system property has been
set. As we also remove this escape hatch, we can remove the additional
checks as well.
Closes#22253
Relates #34588
Today, WriteReplicationAction uses a set of replication targets directly
from the primary shard of ReplicationGroup. It should be fine except
when we add/remove or promote a shard while a write action is executing.
We have encountered these two issues:
1. Replicas are not found in the replication targets. This happens
because we remove replicas but the WriteReplicationAction still uses the
old replication targets which include the removed replicas.
2. Access ReplicationGroup from a primary shard which hasn't activated
the primary-mode yet. This is because we won't activate the primary-mode
for a promoting shard after bumping the primary term which is executed
asynchronously.
This commit captures the replication targets when the replication group
is ready and continue using those targets until we re-compute the new
targets after the group is changed.
Closes#33457
This moves the rollup cleanup code for http tests from the high level rest
client into the test framework and then entirely removes the rollup cleanup
code for http tests that lived in x-pack. This is nice because it
consolidates the cleanup into one spot, automatically invokes the cleanup
without the test having to know that it is "about rollup", and should allow
us to run the rollup docs tests.
Part of #34530
`Engine.Searcher` is non-final today which makes it error prone
in the case of wrapping the underlying reader or lucene `IndexSearcher`
like we do in `IndexSearcherWrapper`. Yet, there is no subclass of it yet
that would be dramatic to just drop on the floor. With the start of development
of frozen indices this changed since in #34357 functionality was added to
a subclass which would be dropped if a `IndexSearcherWrapper` is installed on an index.
This change locks down the `Engine.Searcher` to prevent such a functionality trap.
The `AutoFollowTests` needs to restart the clusters between each tests, because
it is using auto follow stats in assertions. Auto follow stats are only reset
by stopping the elected master node.
Extracted the `testGetOperationsBasedOnGlobalSequenceId()` test to its own test, because it just tests the shard changes api.
* Renamed AutoFollowTests to AutoFollowIT, because it is an integration test.
Renamed ShardChangesIT to IndexFollowingIT, because shard changes it the name
of an internal api and isn't a good name for an integration test.
* move creation of NodeConfigurationSource to a seperate method
* Fixes issues after merge, moved assertSeqNos() and assertSameDocIdsOnShards() methods from ESIntegTestCase to InternalTestCluster, so that ccr tests can use these methods too.
This change disallows negative query boosts. Negative scores are not allowed in Lucene 8 so
it is easier to just disallow negative boosts entirely. We should also deprecate negative boosts
in 6x in order to ensure that users are aware when they'll upgrade to ES 7.
Relates #33309
Today we rewrite the operations from the leader with the term of the
following primary because the follower should own its history. The
problem is that a newly promoted primary may re-assign its term to
operations which were replicated to replicas before by the previous
primary. If this happens, some operations with the same seq_no may be
assigned different terms. This is not good for the future optimistic
locking using a combination of seqno and term.
This change ensures that the primary of a follower only processes an
operation if that operation was not processed before. The skipped
operations are guaranteed to be delivered to replicas via either
primary-replica resync or peer-recovery. However, the primary must not
acknowledge until the global checkpoint is at least the highest seqno of
all skipped ops (i.e., they all have been processed on every replica).
Relates #31751
Relates #31113
Since all calls to `ESLoggerFactory` outside of the logging package were
deprecated, it seemed like it'd simplify things to migrate all of the
deprecated calls and declare `ESLoggerFactory` to be package private.
This does that.
Today's CoordinatorTests have a limited amount of randomisation in how things
are scheduled. However, to be fully confident in Zen2's liveness we require the
system to stabilise after any permitted sequence of events. We can achieve
this by running the system in a much more random fashion for a while, with much
larger variation in when things are scheduled (simulating GC pressure and
network disruption) and then continuing to assert that the system stabilises as
we expect. When running randomly, we do not expect to make significant progress
and merely verify that no safety property is violated.
This change introduces the runRandomly() test method which implements this
idea. It also fixes a handful of liveness bugs that this first version of
runRandomly() exposed.
Adds support for the get rollup job to the High Level REST Client. I had
to do three interesting and unexpected things:
1. I ported the rollup state wiping code into the high level client
tests. I'll move this into the test framework in a followup and remove
the x-pack version.
2. The `timeout` in the rollup config was serialized using the
`toString` representation of `TimeValue` which produces fractional time
values which are more human readable but aren't supported by parsing. So
I switched it to `getStringRep`.
3. Refactor the xcontent round trip testing utilities so we can test
parsing of classes that don't implements `ToXContent`.
Today we schedule tasks (both immediate and future ones) exactly when
requested. In fact it is more realistic to allow for a small amount of delay in
the scheduling of tasks, and this helps to exercise more interleavings of
actions and therefore to improve test coverage.
This change adds to the DeterministicTaskQueue the ability to add a random
delay to the scheduling of tasks.
This change also provides more explicit timeouts for stabilisation in the
CoordinatorTests.
Using the randomised scheduling feature in the CoordinatorTests also found a
situation in which we could become a leader, then a candidate, and then a
leader again very quickly, causing a clash of the _BECOME_MASTER_ and
_FINISH_ELECTION_ tasks. We change their behaviour to not consider these
duplicates to be problematic.
This change introduces the indexing optimization using sequence numbers
in the FollowingEngine. This optimization uses the max_seq_no_updates
which is tracked on the primary of the leader and replicated to replicas
and followers.
Relates #33656
Fixes the equals and hash function to ignore the order of aggregations to ensure equality after serialization
and deserialization. This ensures storing configs with aggregation works properly.
This also addresses a potential issue in caching when the same query contains aggregations but in
different order. 1st it will not hit in the cache, 2nd cache objects which shall be equal might end up twice in
the cache.
The synonym filters no longer need access to the AnalysisRegistry in their
constructors, so we can remove the special-case code and move them to the
common analysis module.
This commit means that synonyms are no longer available for `server` integration tests,
so several of these are either rewritten or migrated to the common analysis module
as rest-spec-api tests
This commit adds the ability to plug in compilation of custom contexts
in mock script engine. This is needed for testing plugins which add
custom contexts like watcher.
* Handle MatchNoDocsQuery in span query wrappers
This change adds a new SpanMatchNoDocsQuery query that replaces
MatchNoDocsQuery in the span query wrappers.
The `wildcard` query now returns MatchNoDocsQuery if the target field is not
in the mapping (#34093) so we need the equivalent span query in order to
be able to pass it to other span wrappers.
Closes#34105
EngineSearcher can be easily folded into Engine.Searcher which removes
a level of inheritance that is necessary for most of it's subclasses.
This change folds it into Engine.Searcher and removes the dependency on
ReferenceManager.
This commit duplicates REST tests for the
- `indices.create`
- `indices.put_mapping`
- `indices.get_mapping`
- `index`
- `get`
- `delete`
- `update`
- `bulk`
APIs, so that we both test them when used without types (include_type_name=false)
and with types, mostly for mixed-version cluster tests.
Given a suite called `X_test_name.yml`, I first copied it to
`(X+1)_test_name_with_types.yml` and then changed `X_test_name.yml` to set
`include_type_name=false` on every API that supports it.
Relates #15613
This commits creates a DateMathParser interface, which is already
implemented for both joda and java time. While currently the java time
DateMathParser is not used, this change will allow a followup which will
create a DateMathParser from a DateFormatter, so the caller does not
need to know the internals of the DateFormatter they have.
Previously, unmapped aggs try to delegate reduction to a sibling agg that is
mapped. That delegated agg will run the reductions, and also
reduce any pipeline aggs. But because delegation comes before running
pipelines, the unmapped agg _also_ tries to run pipeline aggs.
This causes the pipeline to run twice, and potentially double it's output
in buckets which can create invalid JSON (e.g. same key multiple times)
and break when converting to maps.
This fixes by sorting the list of aggregations ahead of time so that mapped
aggs appear first, meaning they preferentially lead the reduction. If all aggs
are unmapped, the first unmapped agg simply creates a new unmapped object
and returns that for the reduction.
This means that unmapped aggs no longer defer and there is no chance for
a secondary execution of pipelines (or other side effects caused by deferring
execution).
Closes#33514
This change cleans up "unused variable" warnings. There are several cases were we
most likely want to suppress the warnings (especially in the client documentation test
where the snippets contain many unused variables). In a lot of cases the unused
variables can just be deleted though.
This commit removes the sysprop controlling whether ctx is in params for
update scripts and replaces it with use of the new ParameterMap, which
outputs a deprecation warning whenever params.ctx is used.
We start tracking max seq_no_of_updates on the primary in #33842. This
commit replicates that value from a primary to its replicas in replication
requests or the translog phase of peer-recovery.
With this change, we guarantee that the value of max seq_no_of_updates
on a replica when any index/delete operation is performed at least the
max_seq_no_of_updates on the primary when that operation was executed.
Relates #33656
Today the CoordinatorTests are not very reliable if two elections are scheduled
concurrently. Although we expect occasional failures due to this, in fact the
failures are much more common than expected due to a handful of issues. This PR
fixes these issues.
This commit introduces an AbstractSimpleSecurityTransportTestCase for
security transports. This classes provides transport tests that are
specific for security transports. Additionally, it fixes the tests referenced in
#33285.
This PR is the first step to use seq_no to optimize indexing operations.
The idea is to track the max seq_no of either update or delete ops on a
primary, and transfer this information to replicas, and replicas use it
to optimize indexing plan for index operations (with assigned seq_no).
The max_seq_no_of_updates on primary is initialized once when a primary
finishes its local recovery or peer recovery in relocation or being
promoted. After that, the max_seq_no_of_updates is only advanced internally
inside an engine when processing update or delete operations.
Relates #33656
With recent changes to the logging framework, the node name can no longer be injected into the logging output using the node.name setting, which means that for the CoordinatorTests (which are simulating a cluster in a fully deterministic fashion using a single thread), as all the different nodes are running under the same test thread, we are not able to distinguish which log lines are coming from which node. This commit readds logging for node ids in the CoordinatorTests, making two very small changes to DeterministicTaskQueue and TestThreadInfoPatternConverter.
This commit reverts most of #33157 as it introduces another race
condition and breaks a common case of watcher, when the first watch is
added to the system and the index does not exist yet.
This means, that the index will be created, which triggers a reload, but
during this time the put watch operation that triggered this is not yet
indexed, so that both processes finish roughly add the same time and
should not overwrite each other but act complementary.
This commit reverts the logic of cleaning out the ticker engine watches
on start up, as this is done already when the execution is paused -
which also gets paused on the cluster state listener again, as we can be
sure here, that the watches index has not yet been created.
This also adds a new test, that starts a one node cluster and emulates
the case of a non existing watches index and a watch being added, which
should result in proper execution.
Closes#33320
* Setting SO_LINGER for open but not connected non-blocking sockets
throws on OSX
* Fixed by only applying setting to connected sockets which will save
the same number of FDs as doing it on open sockets anyway
* closes#33879
Today we don't store the auto-generated timestamp of append-only
operations in Lucene; and assign -1 to every index operations
constructed from LuceneChangesSnapshot. This looks innocent but it
generates duplicate documents on a replica if a retry append-only
arrives first via peer-recovery; then an original append-only arrives
via replication. Since the retry append-only (delivered via recovery)
does not have timestamp, the replica will happily optimizes the original
request while it should not.
This change transmits the max auto-generated timestamp from the primary
to replicas before translog phase in peer recovery. This timestamp will
prevent replicas from optimizing append-only requests if retry
counterparts have been processed.
Relates #33656
Relates #33222
It is important that follower nodes periodically check that their leader is
still healthy and that they remain part of its cluster. If these checks fail
repeatedly then followers should attempt to find and join a new leader,
possibly electing one in the process. The LeaderChecker, introduced in this
commit, performs these periodic checks and deals with retries.
Currently, assertSeqNos assumes that the cluster is stable at the end of
the test (i.e., no more shard movement). However, this assumption does
not always hold. In these cases, we can stop the assertion instead of
failing a test.
Closes#33704
Changes the default of the `node.name` setting to the hostname of the
machine on which Elasticsearch is running. Previously it was the first 8
characters of the node id. This had the advantage of producing a unique
name even when the node name isn't configured but the disadvantage of
being unrecognizable and not being available until fairly late in the
startup process. Of particular interest is that it isn't available until
after logging is configured. This forces us to use a volatile read
whenever we add the node name to the log.
Using the hostname is available immediately on startup and is generally
recognizable but has the disadvantage of not being unique when run on
machines that don't set their hostname or when multiple elasticsearch
processes are run on the same host. I believe that, taken together, it
is better to default to the hostname.
1. Running multiple copies of Elasticsearch on the same node is a fairly
advanced feature. We do it all the as part of the elasticsearch build
for testing but we make sure to set the node name then.
2. That the node.name defaults to some flavor of "localhost" on an
unconfigured box feels like it isn't going to come up too much in
production. I expect most production deployments to at least set the
hostname.
As a bonus, production deployments need no longer set the node name in
most cases. At least in my experience most folks set it to the hostname
anyway.
Wraps all lines in our test framework at 140 characters because that is
our standard line length and removes all of the checkstyle suppressions
for the test framework.
Drops most of `ModuleTestCase` because it isn't used and we're moving
away from using guice in the way that it wants to test anyway. Also
switches a few classes that extend it but don't use it to extend
`ESTestCase` instead.
* TESTS: Set SO_LINGER = 0 for MockNioTransport
* Prevents lingering sockets in TIME_WAIT piling up during test runs and leading to port collisions that manifest as timeouts
* Fixes#32552
This change fixes a bug introduced in 6.3 that prevents fields with an explicit
similarity to be updated. It also adds a test that checks this case for similarities
but also for analyzers since they could suffer from the same problem.
Closes#33611
Today we use a special unicast hosts provider, the `MockUncasedHostsProvider`,
in many integration tests, to deal with the dynamic nature of the allocation of
ports to nodes. However #33241 allows us to use file-based discovery to achieve
the same goal, so the special test-only `MockUncasedHostsProvider` is no longer
required.
This change removes `MockUncasedHostProvider` and replaces it with file-based
discovery in tests based on `EsIntegTestCase`.
For correctness we need to verify whether the history uuid of the leader
index shards never changes while that index is being followed.
* The history UUIDs are recorded as custom index metadata in the follow index.
* The follow api validates whether the current history UUIDs of the leader
index shards are the same as the recorded history UUIDs.
If not the follow api fails.
* While a follow index is following a leader index; shard follow tasks
on each shard changes api call verify whether their current history uuid
is the same as the recorded history uuid.
Relates to #30086
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
This change adds a `_source` only snapshot repository that allows to wrap
any existing repository as a _backend_ to snapshot only the `_source` part
including live docs markers. Snapshots taken with the `source` repository
won't include any indices, doc-values or points. The snapshot will be reduced in size and
functionality such that it requires full re-indexing after it's successfully restored.
The restore process will copy the `_source` data locally starts a special shard and engine
to allow `match_all` scrolls and searches. Any other query, or get call will fail with and unsupported operation exception. The restored index is also marked as read-only.
This feature aims mainly for disaster recovery use-cases where snapshot size is
a concern or where time to restore is less of an issue.
**NOTE**: The snapshot produced by this repository is still a valid lucene index. This change doesn't allow for any longer retention policies which is out of scope for this change.
When a replica starts following a newly promoted primary, it may have
some operations which don't exist on the new primary. Thus we need to
throw those operations to align a replica with the new primary. This can
be done by first resetting an engine from the safe commit, then replaying
the local translog up to the global checkpoint.
Relates #32867
Today the full cluster restart tests do not preserve cluster settings on
restart. This is a mistake because it is not an accurate reflection of
reality, we do not expect users to clear cluster settings when they
perform a full cluster restart. This commit makes it so that all full
cluster restart tests preserve settings on upgrade.
* LeafCollector.setScorer() now takes a Scorable
* Scorers may not have null Weights
* IndexWriter.getFlushingBytes() reports how much memory is being used by IW threads writing to disk
In some cases we want to skip wiping cluster settings after a REST
test. For example, one use-case would be in the full cluster restart
tests where want to test cluster settings before and after a full
cluster restart. If we wipe the cluster settings before the restart,
then it would not be possible to assert on them after the restart.
In some cases we want to deprecate a setting, and then automatically
upgrade uses of that setting to a replacement setting. This commit adds
infrastructure for this so that we can upgrade settings when recovering
the cluster state, as well as when such settings are dynamically applied
on cluster update settings requests. This commit only focuses on cluster
settings, index settings can build on this infrastructure in a
follow-up.
This commit adds license checks for the auto-follow implementation. We
check the license on put auto-follow patterns, and then for every
coordination round we check that the local and remote clusters are
licensed for CCR. In the case of non-compliance, we skip coordination
yet continue to schedule follow-ups.
This commit ensures that we bootstrap a new history_uuid when force
allocating a stale primary. A stale primary should never be the source
of an operation-based recovery to another shard which exists before the
forced-allocation.
Closes#26712
Change the logging infrastructure to handle when the node name isn't
available in `elasticsearch.yml`. In that case the node name is not
available until long after logging is configured. The biggest change is
that the node name logging no longer fixed at pattern build time.
Instead it is read from a `SetOnce` on every print. If it is unset it is
printed as `unknown` so we have something that fits in the pattern.
On normal startup we don't log anything until the node name is available
so we never see the `unknown`s.
Instead of passing DirectoryService which causes yet another dependency
on Store we can just pass in a Directory since we will just call
`DirectoryService#newDirectory()` on it anyway.
This change collapses all metrics aggregations classes into a single package `org.elasticsearch.aggregations.metrics`.
It also restricts the visibility of some classes (aggregators and factories) that should not be used outside of the package.
Relates #22868
When we rollover and index we write the conditions of the rollover that
the old index met into the old index. Loading this index metadata
requires a working `NamedXContentRegistry` that has been populated with
parsers from the rollover infrastructure. We had a few loads that didn't
use a working `NamedXContentRegistry` and so would fail if they ever
encountered an index that had been rolled over. Here are the locations
of the loads and how I fixed them:
* IndexFolderUpgrader - removed entirely. It existed to support opening
indices made in Elasticsearch 2.x. Since we only need this change as far
back as 6.4.1 which will supports reading from indices created as far
back as 5.0.0 we should be good here.
* TransportNodesListGatewayStartedShards - wired the
`NamedXContentRegistry` into place.
* TransportNodesListShardStoreMetaData - wired the
`NamedXContentRegistry` into place.
* OldIndexUtils - removed entirely. It existed to support the zip based
index backwards compatibility tests which we've since replaced with code
that actually runs old versions of Elasticsearch.
In addition to fixing the actual problem I added full cluster restart
integration tests for rollover which would have caught this problem and
I added an extra assertion to IndexMetaData's deserialization code which
will trip if we try to deserialize and index's metadata without a fully
formed `NamedXContentRegistry`. It won't catch if use the *wrong*
`NamedXContentRegistry` but it is better than nothing.
Closes#33316
This commit allows us to use different TranslogRecoveryRunner when
recovering an engine from its local translog. This change is a
prerequisite for the commit-based rollback PR.
Relates #32867
The main benefit of the upgrade for users is the search optimization for top scored documents when the total hit count is not needed. However this optimization is not activated in this change, there is another issue opened to discuss how it should be integrated smoothly.
Some comments about the change:
* Tests that can produce negative scores have been adapted but we need to forbid them completely: #33309Closes#32899
This removes `PhaseAfterStep` in favor of a new `PhaseCompleteStep`. This step
in only a marker that the `LifecyclePolicyRunner` needs to halt until the time
indicated for entering the next phase.
This also fixes a bug where phase times were encapsulated into the policy
instead of dynamically adjusting to policy changes.
Supersedes #33140, which it replaces
Relates to #29823
This commit is related to #32517. It allows an "server_name"
attribute on a DiscoveryNode to be propagated to the server using
the TLS SNI extentsion. This functionality is only implemented for
the netty security transport.
Now that types are unique per mapping we can retrieve the document mapper
without referencing the type. This fixes an NPE when stored fields are disabled.
For 6x we'll need a different fix since mappings can still have multiple types.
Relates #32941
This commit introduces the formal notion of a private setting. This
enables us to register some settings that we had previously not
registered as fully-fledged settings to avoid them being exposed via
APIs such as the create index API. For example, we had hacks in the
codebase to allow index.version.created to be passed around inside of
settings objects, but was not registered as a setting so that if a user
tried to use the setting on any API then they would get an
exception. This prevented users from setting index.version.created on
index creation, or updating it via the index settings API. By
introducing private settings, we can continue to reject these attempts,
yet now we can represent these settings as actual settings. In this
change, we register index.version.created as an actual setting. We do
not cutover all settings that we had been treating as private in this
pull request, it is already quite large due to moving some tests around
to account for the fact that some tests need to be able to set the
index.version.created. This can be done in a follow-up change.
Drops `Settings` from some logging ctors now that they are no longer
needed. This should allow us to stop passing `Settings` around to quite
as many places.
This PR integrates Lucene soft-deletes(LUCENE-8200) into Elasticsearch.
Highlight works in this PR include:
- Replace hard-deletes by soft-deletes in InternalEngine
- Use _recovery_source if _source is disabled or modified (#31106)
- Soft-deletes retention policy based on the global checkpoint (#30335)
- Read operation history from Lucene instead of translog (#30120)
- Use Lucene history in peer-recovery (#30522)
Relates #30086Closes#29530
---
These works have been done by the whole team; however, these individuals
(lexical order) have significant contribution in coding and reviewing:
Co-authored-by: Adrien Grand <jpountz@gmail.com>
Co-authored-by: Boaz Leskes <b.leskes@gmail.com>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: Simon Willnauer <simonw@apache.org>
This PR integrates Lucene soft-deletes(LUCENE-8200) into Elasticsearch.
Highlight works in this PR include:
- Replace hard-deletes by soft-deletes in InternalEngine
- Use _recovery_source if _source is disabled or modified (#31106)
- Soft-deletes retention policy based on the global checkpoint (#30335)
- Read operation history from Lucene instead of translog (#30120)
- Use Lucene history in peer-recovery (#30522)
Relates #30086Closes#29530
---
These works have been done by the whole team; however, these individuals
(lexical order) have significant contribution in coding and reviewing:
Co-authored-by: Adrien Grand jpountz@gmail.com
Co-authored-by: Boaz Leskes b.leskes@gmail.com
Co-authored-by: Jason Tedor jason@tedor.me
Co-authored-by: Martijn van Groningen martijn.v.groningen@gmail.com
Co-authored-by: Nhat Nguyen nhat.nguyen@elastic.co
Co-authored-by: Simon Willnauer simonw@apache.org
Some AbstractDisruptionTestCase tests start failing since we enabled
assertSeqNos (in #33130). They fail because the assertSeqNos assertion
queries cluster stats while the cluster is disrupted or not formed yet.
This commit switches to use the cluster state and shard stats directly
from the test cluster.
Closes#33251
This commit checks that when we manually add a class to
the codebase map, that it does in-fact not exist on the classpath
in a jar. This will only be true if we are using the test framework
externally such as when a user develops a plugin.
We generate slightly different NoOps in InternalEngine and
TransportShardBulkAction for the same failure.
1. InternalEngine uses Exception#getFailure to generate a message
without the class name: newOp [NoOp{seqNo=1, primaryTerm=1,
reason='Contexts are mandatory in context enabled completion field
[suggest_context]'}].
2. TransportShardBulkAction uses Exception#toString to generate a
message with the class name: NoOp{seqNo=1, primaryTerm=1,
reason='java.lang.IllegalArgumentException: Contexts are mandatory in
context enabled completion field [suggest_context]'}.
If a write operation fails while a replica is recovering, that replica
will possibly receive two different NoOps: one from recovery and one
from replication. These two different NoOps will trip
TranslogWriter#assertNoSeqNumberConflict assertion.
This commit ensures that we generate the same Noop for the same failure.
Closes#32986
This adds support for connecting to a remote cluster through
a tcp proxy. A remote cluster can configured with an additional
`search.remote.$clustername.proxy` setting. This proxy will be used
to connect to remote nodes for every node connection established.
We still try to sniff the remote clsuter and connect to nodes directly
through the proxy which has to support some kind of routing to these nodes.
Yet, this routing mechanism requires the handshake request to include some
kind of information where to route to which is not yet implemented. The effort
to use the hostname and an optional node attribute for routing is tracked
in #32517Closes#31840
If a shard was closed, we return null for SeqNoStats. Therefore the
assertion assertSeqNos will hit NPE when it verifies a closed shard.
This commit skips closed shards in assertSeqNos and enables this
assertion in AbstractDisruptionTestCase.
This commit adds a hook to AbstractSerializingTestCase to enable
skipping asserting that the x-content of the test instance and an
instance parsed from the x-content of the test instance are the
same. While we usually expect these to be the same, they will not be the
same when exceptions are involved because the x-content there is lossy.
Adds the logic for handling joins by a prospective leader. Introduces the Coordinator class with the
basic lifecycle modes (candidate, leader, follower) as well as a JoinHelper class that contains most
of the plumbing for handling joins.
* `foobar.txGet()` appears to return before `serviceB.stop()` returns, causing `ServiceB.close()` to run concurrently with the `stop` call and running into a race codition
* Closes#32863
We used to set `maxScore` to `0` within `TopDocs` in situations where there is really no score as the size was set to `0` and scores were not even tracked. In such scenarios, `Float.Nan` is more appropriate, which gets converted to `max_score: null` on the REST layer. That's also more consistent with lucene which set `maxScore` to `Float.Nan` when merging empty `TopDocs` (see `TopDocs#merge`).
This change allows an engine to recover from its local translog up to
the given seqno. The extended API can be used in these use cases:
When a replica starts following a new primary, it resets its index to
the safe commit, then replays its local translog up to the current
global checkpoint (see #32867).
When a replica starts a peer-recovery, it can initialize the
start_sequence_number to the persisted global checkpoint instead of the
local checkpoint of the safe commit. A replica will then replay its
local translog up to that global checkpoint before accepting remote
translog from the primary. This change will increase the chance of
operation-based recovery. I will make this in a follow-up.
Relates #32867
Today, CapturingTransport#createCapturingTransportService creates a transport
service with a connection manager with reasonable default behaviours, but
overriding this behaviour in a consumer is a litle tricky. Additionally, the
default behaviour for opening a connection duplicates the content of the
CapturingTransport#openConnection() method.
This change removes this duplication by delegating to openConnection() and
introduces overridable nodeConnected() and onSendRequest() methods so that
consumers can alter this behaviour more easily.
Relates #32246 in which we test the mechanisms for opening connections to
unknown (and possibly unreachable) nodes.
This change introduces a dedicated ConnectionManager for every RemoteClusterConnection
such that there is not state shared with the TransportService internal ConnectionManager.
All connections to a remote cluster are isolated from the TransportService but still uses
the TransportService and it's internal properties like the Transport, tracing and internal
listener actions on disconnects etc.
This allows a remote cluster connection to have a different lifecycle than a local cluster connection,
also local discovery code doesn't get notified if there is a disconnect on from a remote cluster and
each connection can use it's own dedicated connection profile which allows to have a reduced set of
connections per cluster without conflicting with the local cluster.
Closes#31835
An election requires a node to select a term that is higher than all
previously-seen terms. If nodes are too enthusiastic about starting elections
then they can effectively excludes itself from the cluster until the leader can
bump to a still-higher term, and if this process repeats then a single faulty
node can prevent the cluster from making useful progress.
The solution is to start the election with a pre-voting round to ensure that
there is at least a quorum of nodes who believe there to be no leader.
This also fixes up some merge issues.
This is related to #32517. This commit passes the DiscoveryNode to the
initiateChannel method for different Transport implementation. This
will allow additional attributes (besides just the socket address) to be
used when opening channels.
This is a followup to #31886. After that commit the
TransportConnectionListener had to be propogated to both the
Transport and the ConnectionManager. This commit moves that listener
to completely live in the ConnectionManager. The request and response
related methods are moved to a TransportMessageListener. That listener
continues to live in the Transport class.
This is related to #31835. It moves the default connection profile into
the ConnectionManager class. The will allow us to have different
connection managers with different profiles.
This removes custom Response classes that extend `AcknowledgedResponse` and do nothing, these classes are not needed and we can directly use the non-abstract super-class instead.
While this appears to be a large PR, no code has actually changed, only class names have been changed and entire classes removed.
This commit fixes existing uses of forbidden apis in the test framework
and re-enables the forbidden apis check. It was previously completely
disabled and had missed a rename of the forbidden apis signatures files.
closes#32772
This is related to #31835. This commit adds a connection manager that
manages client connections to other nodes. This means that the
TcpTransport no longer maintains a map of nodes that it is connected
to.
Increases testability of MasterService and the discovery layer. Changes:
- Async publish method
- Moved a few interfaces/classes top-level to simplify imports
- Deterministic MasterService implementation for tests
Our rest testing framework has support for sniffing the host metadata on
startup and, before this change, it'd sniff that metadata before running
the first test. This prevents running these tests against
elasticsearch installations that won't support sniffing like Elastic
Cloud. This change allows tests to only sniff for metadata when they
encounter a test with a `node_selector`. These selectors are the things
that need the metadata anyway and they are super rare. Tests that use
these won't be able to run against installations that don't support
sniffing but we can just skip them. In the case of Elastic Cloud, these
tests were never going to work against Elastic Cloud anyway.
Currently AbstractBuilderTestCase generates certain random values in its
`beforeTest()` method annotated with @Before only the first time that a test
method in the suite is run while initializing the serviceHolder that we use for
the rest of the test. This changes the values of subsequent random values
and has the effect that when running single methods from a test suite with
"-Dtests.method=*", the random values it sees are different from when the same
test method is run as part of the whole test suite. This makes it hard to use
the reproduction lines logged on failure.
This change runs the inialization of the serviceHolder and the randomization
connected to it using the test runners master seed, so reproduction by running
just one method is possible again.
Closes#32400
Processing bulk request goes item by item. Sometimes during processing, we need to stop execution and wait for a new mapping update to be processed by the node. This is currently achieved by throwing a `RetryOnPrimaryException`, which is caught higher up. When the exception is caught, we wait for the next cluster state to arrive and process the request again. Sadly this is a problem because all operations that were already done until the mapping change was required are applied again and get new sequence numbers. This in turn means that the previously issued sequence numbers are never replicated to the replicas. That causes the local checkpoint of those shards to be stuck and with it all the seq# based infrastructure.
This commit refactors how we deal with retries with the goal of removing `RetryOnPrimaryException` and `RetryOnReplicaException` (not done yet). It achieves so by introducing a class `BulkPrimaryExecutionContext` that is used the capture the execution state and allows continuing from where the execution stopped. The class also formalizes the steps each item has to go through:
1) A translation phase for updates
2) Execution phase (always index/delete)
3) Waiting for a mapping update to come in, if needed
4) Requires a retry (for updates and cases where the mapping are still not available after the put mapping call returns)
5) A finalization phase which allows updates to the index/delete result to an update result.
Enhance reproduction line with info about jdks
Provide the ability to control compiler and hava versions just by
passing a property. The actual java home comes from the
`JAVA<major>_HOME` env vars that we allready require.
This works better with the Gradle daemon as well.
Output is also changed a bit.
for `-Druntime.java=8 -Dcompiler.java=9`:
```
=======================================
Elasticsearch Build Hamster says Hello!
Gradle Version : 4.9
OS Info : Linux 4.17.8-1-ARCH (amd64)
Compiler JDK Version : 11 (Oracle Corporation 11-ea [OpenJDK 64-Bit Server VM 11-ea+22])
Runtime JDK Version : 11 (Oracle Corporation 11-ea [OpenJDK 64-Bit Server VM 11-ea+22])
Gradle JDK Version : 10 (Oracle Corporation 10.0.1 [OpenJDK 64-Bit Server VM 10.0.1+10])
Compiler java.home : /home/alpar/opt/jdk-11-ea22/
Runtime java.home : /home/alpar/opt/jdk-11-ea22/
Gradle java.home : /usr/lib/jvm/java-10-openjdk
Random Testing Seed : EA858533191E8DFB
=======================================
```
Without configuration:
```
=======================================
Elasticsearch Build Hamster says Hello!
=======================================
Gradle Version : 4.9
OS Info : Linux 4.17.8-1-ARCH (amd64)
JDK Version : 10 (Oracle Corporation 10.0.1 [OpenJDK 64-Bit Server VM 10.0.1+10])
JAVA_HOME : /usr/lib/jvm/java-10-openjdk
Random Testing Seed : 4BD5B2A839C8FCA1
=======================================
```
Here's how a reproduction line will look like (test made to fail):
```
./gradlew :modules:lang-painless:test -Dtests.seed=2DA2379065A4EEAB -Dtests.class=org.elasticsearch.painless.AdditionTests -Dtests.method="testInt" -Dtests.security.manager=true -Dtests.locale=es-PE -Dtests.timezone=WET -Dcompiler.java=10 -Druntime.java=10
```
It will be useful for future efforts to know if the global checkpoint
was updated. To this end, we need to expose whether or not the global
checkpoint was updated when the state of the replication tracker
updates. For this, we add to the tracker a callback that is invoked
whenever the global checkpoint is updated. For primaries this will be
invoked when the computed global checkpoint is updated based on state
changes to the tracker. For replicas this will be invoked when the local
knowledge of the global checkpoint is advanced from the primary.
The MockNioTransport (similar to the MockTcpTransport) is used for integ
tests. The MockTcpTransport has always only opened a single for all of
its work. The MockNioTransport has awlays opened the default number of
connections (13). This means that every test where two transports
connect requires 26 connections. This is more than is necessary. This
commit modifies the MockNioTransport to only require 3 connections.
The `PeerFinder`, introduced in #32246, needs to be able to identify, and
connect to, a remote master node using only its `TransportAddress`. This can be
done by opening a single-channel connection to the address, performing a
handshake, and only then forming a full-blown connection to the node. This
change implements this logic.
We've recently seen a number of test failures that tripped an assertion in IndexShard (see issues
linked below), leading to the discovery of a race between resetting a replica when it learns about a
higher term and when the same replica is promoted to primary. This commit fixes the race by
distinguishing between a cluster state primary term (called pendingPrimaryTerm) and a shard-level
operation term. The former is set during the cluster state update or when a replica learns about a
new primary. The latter is only incremented under the operation block, which can happen in a
delayed fashion. It also solves the issue where a replica that's still adjusting to the new term
receives a cluster state update that promotes it to primary, which can happen in the situation of
multiple nodes being shut down in short succession. In that case, the cluster state update thread
would call `asyncBlockOperations` in `updateShardState`, which in turn would throw an exception
as blocking permits is not allowed while an ongoing block is in place, subsequently failing the shard.
This commit therefore extends the IndexShardOperationPermits to allow it to queue multiple blocks
(which will all take precedence over operations acquiring permits). Finally, it also moves the primary
activation of the replication tracker under the operation block, so that the actual transition to
primary only happens under the operation block.
Relates to #32431, #32304 and #32118
This change updates KerberosAuthenticationIT to resolve the host used
to connect to the test cluster. This is needed because the host could
be an IP address but SPNEGO requires a hostname to work properly. This
is done by adding a hook in ESRestTestCase for building the HttpHost
from the host and port.
Additionally, the project now specifies the IPv4 loopback address as
the http host. This is done because we need to be able to resolve the
address used for the HTTP transport before the node starts up, but the
http.ports file is not written until the node is started.
Closes#32498
First, some background: we have 15 different methods to get a logger in
Elasticsearch but they can be broken down into three broad categories
based on what information is provided when building the logger.
Just a class like:
```
private static final Logger logger = ESLoggerFactory.getLogger(ActionModule.class);
```
or:
```
protected final Logger logger = Loggers.getLogger(getClass());
```
The class and settings:
```
this.logger = Loggers.getLogger(getClass(), settings);
```
Or more information like:
```
Loggers.getLogger("index.store.deletes", settings, shardId)
```
The goal of the "class and settings" variant is to attach the node name
to the logger. Because we don't always have the settings available, we
often use the "just a class" variant and get loggers without node names
attached. There isn't any real consistency here. Some loggers get the
node name because it is convenient and some do not.
This change makes the node name available to all loggers all the time.
Almost. There are some caveats are testing that I'll get to. But in
*production* code the node name is node available to all loggers. This
means we can stop using the "class and settings" variants to fetch
loggers which was the real goal here, but a pleasant side effect is that
the ndoe name is now consitent on every log line and optional by editing
the logging pattern. This is all powered by setting the node name
statically on a logging formatter very early in initialization.
Now to tests: tests can't set the node name statically because
subclasses of `ESIntegTestCase` run many nodes in the same jvm, even in
the same class loader. Also, lots of tests don't run with a real node so
they don't *have* a node name at all. To support multiple nodes in the
same JVM tests suss out the node name from the thread name which works
surprisingly well and easy to test in a nice way. For those threads
that are not part of an `ESIntegTestCase` node we stick whatever useful
information we can get form the thread name in the place of the node
name. This allows us to keep the logger format consistent.
`GetResult` and `SearchHit` have been adjusted to parse back the `_ignored` meta field whenever it gets printed out. Expanded the existing tests to make sure this is covered. Fixed also a small problem around highlighted fields in `SearchHitTests`.
This commit changes the randomization to always create an index with a type.
It also adds a way to create a query shard context that maps to an index with
no type registered in order to explicitely test cases where there is no type.
Today we allow plugins to add index store implementations yet we are not
doing this in our new way of managing plugins as pull versus push. That
is, today we still allow plugins to push index store providers via an on
index module call where they can turn around and add an index
store. Aside from being inconsistent with how we manage plugins today
where we would look to pull such implementations from plugins at node
creation time, it also means that we do not know at a top-level (for
example, in the indices service) which index stores are available. This
commit addresses this by adding a dedicated plugin type for index store
plugins, removing the index module hook for adding index stores, and by
aggregating these into the top-level of the indices service.
This commit introduces "Application Privileges" to the X-Pack security
model.
Application Privileges are managed within Elasticsearch, and can be
tested with the _has_privileges API, but do not grant access to any
actions or resources within Elasticsearch. Their purpose is to allow
applications outside of Elasticsearch to represent and store their own
privileges model within Elasticsearch roles.
Access to manage application privileges is handled in a new way that
grants permission to specific application names only. This lays the
foundation for more OLS on cluster privileges, which is implemented by
allowing a cluster permission to inspect not just the action being
executed, but also the request to which the action is applied.
To support this, a "conditional cluster privilege" is introduced, which
is like the existing cluster privilege, except that it has a Predicate
over the request as well as over the action name.
Specifically, this adds
- GET/PUT/DELETE actions for defining application level privileges
- application privileges in role definitions
- application privileges in the has_privileges API
- changes to the cluster permission class to support checking of request
objects
- a new "global" element on role definition to provide cluster object
level security (only for manage application privileges)
- changes to `kibana_user`, `kibana_dashboard_only_user` and
`kibana_system` roles to use and manage application privileges
Closes#29820Closes#31559
* Complete changes for running IT in a fips JVM
- Mute :x-pack:qa:sql:security:ssl:integTest as it
cannot run in FIPS 140 JVM until the SQL CLI supports key/cert.
- Set default JVM keystore/truststore password in top level build
script for all integTest tasks in a FIPS 140 JVM
- Changed top level x-pack build script to use keys and certificates
for trust/key material when spinning up clusters for IT
* Enabled advanced leak detection when loading `EsTestCase`
* Added custom `Appender` to collect leak logs and check for logged errors in a way similar to what is done for the `StatusLogger`
* Fixes#20398
* Add basic support for field aliases in index mappings. (#31287)
* Allow for aliases when fetching stored fields. (#31411)
* Add tests around accessing field aliases in scripts. (#31417)
* Add documentation around field aliases. (#31538)
* Add validation for field alias mappings. (#31518)
* Return both concrete fields and aliases in DocumentFieldMappers#getMapper. (#31671)
* Make sure that field-level security is enforced when using field aliases. (#31807)
* Add more comprehensive tests for field aliases in queries + aggregations. (#31565)
* Remove the deprecated method DocumentFieldMappers#getFieldMapper. (#32148)
When a replica is fully recovered (i.e., in `POST_RECOVERY` state) we send a request to the master
to start the shard. The master changes the state of the replica and publishes a cluster state to that
effect. In certain cases, that cluster state can be processed on the node hosting the replica
*together* with a cluster state that promotes that, now started, replica to a primary. This can
happen due to cluster state batched processing or if the master died after having committed the
cluster state that starts the shard but before publishing it to the node with the replica. If the master
also held the primary shard, the new master node will remove the primary (as it failed) and will also
immediately promote the replica (thinking it is started).
Sadly our code in IndexShard didn't allow for this which caused [assertions](13917162ad/server/src/main/java/org/elasticsearch/index/seqno/ReplicationTracker.java (L482)) to be tripped in some of our tests runs.
Sometimes we have a test failure that hits an `UnsupportedOperationException` in this infrastructure. When
debugging you want to know what caused this unexpected failure, but right now we're silent about it. This
commit adds some information to the `UnsupportedOperationException`
Relates to #32127
With the introduction of sequence number, we no longer use versionType to
resolve out of order collision in replication and recovery requests.
This PR removes removes the versionType from translog. We can only remove
it in 7.0 because it is still required in a mixed cluster between 6.x and 5.x.
Ensure our tests can run in a FIPS JVM
JKS keystores cannot be used in a FIPS JVM as attempting to use one
in order to init a KeyManagerFactory or a TrustManagerFactory is not
allowed.( JKS keystore algorithms for private key encryption are not
FIPS 140 approved)
This commit replaces JKS keystores in our tests with the
corresponding PEM encoded key and certificates both for key and trust
configurations.
Whenever it's not possible to refactor the test, i.e. when we are
testing that we can load a JKS keystore, etc. we attempt to
mute the test when we are running in FIPS 140 JVM. Testing for the
JVM is naive and is based on the name of the security provider as
we would control the testing infrastrtucture and so this would be
reliable enough.
Other cases of tests being muted are the ones that involve custom
TrustStoreManagers or KeyStoreManagers, null TLS Ciphers and the
SAMLAuthneticator class as we cannot sign XML documents in the
way we were doing. SAMLAuthenticator tests in a FIPS JVM can be
reenabled with precomputed and signed SAML messages at a later stage.
IT will be covered in a subsequent PR
With this commit we disable the real-memory circuit breaker in tests
that inherit from `ESSingleNodeTestCase`. As this breaker is based on
real memory usage over which we have no (full) control in tests and
their purpose is also not to test the circuit breaker, we use the
deterministic circuit breaker implementation that only accounts for
explicitly reserved memory.
Closes#32047
Relates #32071
* Replace Ingest ScriptContext with Custom Interface
* Make org.elasticsearch.ingest.common.ScriptProcessorTests#testScripting more precise
* Don't mock script factory in ScriptProcessorTests
* Adjust mock script plugin in IT for new API
* Adds a new auto-interval date histogram
This change adds a new type of histogram aggregation called `auto_date_histogram` where you can specify the target number of buckets you require and it will find an appropriate interval for the returned buckets. The aggregation works by first collecting documents in buckets at second interval, when it has created more than the target number of buckets it merges these buckets into minute interval bucket and continues collecting until it reaches the target number of buckets again. It will keep merging buckets when it exceeds the target until either collection is finished or the highest interval (currently years) is reached. A similar process happens at reduce time.
This aggregation intentionally does not support min_doc_count, offest and extended_bounds to keep the already complex logic from becoming more complex. The aggregation accepts sub-aggregations but will always operate in `breadth_first` mode deferring the computation of sub-aggregations until the final buckets from the shard are known. min_doc_count is effectively hard-coded to zero meaning that we will insert empty buckets where necessary.
Closes#9572
* Adds documentation
* Added sub aggregator test
* Fixes failing docs test
* Brings branch up to date with master changes
* trying to get tests to pass again
* Fixes multiBucketConsumer accounting
* Collects more buckets than needed on shards
This gives us more options at reduce time in terms of how we do the
final merge of the buckeets to produce the final result
* Revert "Collects more buckets than needed on shards"
This reverts commit 993c782d117892af9a3c86a51921cdee630a3ac5.
* Adds ability to merge within a rounding
* Fixes nonn-timezone doc test failure
* Fix time zone tests
* iterates on tests
* Adds test case and documentation changes
Added some notes in the documentation about the intervals that can bbe
returned.
Also added a test case that utilises the merging of conseecutive buckets
* Fixes performance bug
The bug meant that getAppropriate rounding look a huge amount of time
if the range of the data was large but also sparsely populated. In
these situations the rounding would be very low so iterating through
the rounding values from the min key to the max keey look a long time
(~120 seconds in one test).
The solution is to add a rough estimate first which chooses the
rounding based just on the long values of the min and max keeys alone
but selects the rounding one lower than the one it thinks is
appropriate so the accurate method can choose the final rounding taking
into account the fact that intervals are not always fixed length.
Thee commit also adds more tests
* Changes to only do complex reduction on final reduce
* merge latest with master
* correct tests and add a new test case for 10k buckets
* refactor to perform bucket number check in innerBuild
* correctly derive bucket setting, update tests to increase bucket threshold
* fix checkstyle
* address code review comments
* add documentation for default buckets
* fix typo
With this commit we introduce a new circuit-breaking strategy to the parent
circuit breaker. Contrary to the current implementation which only accounts for
memory reserved via child circuit breakers, the new strategy measures real heap
memory usage at the time of reservation. This allows us to be much more
aggressive with the circuit breaker limit so we bump it to 95% by default. The
new strategy is turned on by default and can be controlled with the new cluster
setting `indices.breaker.total.userealmemory`.
Note that we turn it off for all integration tests with an internal test cluster
because it leads to spurious test failures which are of no value (we cannot
fully control heap memory usage in tests). All REST tests, however, will make
use of the real memory circuit breaker.
Relates #31767
Currently AbstractXContentTestCase#testFromXContent appends random fields, but in
a fixed position. This PR shuffles all fields after the random fields have been appended,
hence the random fields are actually added to random positions.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `test/framework` project to use the new
versions.
* Fix assertIngestDocument wrongfully passing
* Previously docA being subset of docB passed because iteration was over docA's keys only
* Scalars in nested fields were not compared in all cases
* Assertion errors were hard to interpret (message wasn't correct since it only mentioned the class type)
* In cases where two paths contained different types a ClassCastException was thrown instead of an AssertionError
* Fixes#28492
A newly added class called DateFormatters now contains java.time based
builders for dates, which also intends to be fully backwards compatible,
when the name based date formatters are picked. Also a new class named
CompoundDateTimeFormatter for being able to parse multiple different
formats has been added.
A duelling test class has been added that ensures the same dates when
parsing java or joda time formatted dates for the name based dates.
Note, that java.time and joda time are not fully backwards compatible,
which also means that old formats will currently not work with this
setup.
At the end of every `ESRestTestCase` we clean the cluster which includes
deleting all of the templates. If xpack is installed it'll automatically
recreate a few templates every time they are removed. Which is slow.
This change stops the cleanup from removing the xpack templates. It cuts
the time to run the docs tests more than in half and it probably saves a
bit more time on other tests as well.
Today TransportService is tightly coupled with Transport since it
requires an instance of TransportService in order to receive responses
and send requests. This is mainly due to the Request and Response handlers
being maintained in TransportService but also because of the lack of a proper
callback interface.
This change moves request handler registry and response handler registration into
Transport and adds all necessary methods to `TransportConnectionListener` in order
to remove the `TransportService` dependency from `Transport`
Transport now accepts one or more `TransportConnectionListener` instances that are
executed sequentially in a blocking fashion.
Adds a new parameter to the BlobContainer#write*Blob methods to specify whether the existing file
should be overridden or not. For some metadata files in the repository, we actually want to replace
the current file. This is currently implemented through an explicit blob delete and then a fresh write.
In case of using a cloud provider (S3, GCS, Azure), this results in 2 API requests instead of just 1.
This change will therefore allow us to achieve the same functionality using less API requests.
Some proxies require all requests to have paths starting with / since
there are no relative paths at the HTTP connection level. Elasticsearch
assumes paths are absolute. In order to run rest tests against a cluster
behind such a proxy, set the system property
tests.rest.client_path_prefix to /.
This commit removes some tests in the repository-s3 plugin that
have not been executed for 2+ years but have been maintained
for nothing. Most of the tests in AbstractAwsTestCase were
obsolete or superseded by fixture based integration tests.
The TaskManager and TaskAwareRequest could return null when registering
a task according to their javadocs, but no implementations ever actually
did that. This commit removes that wording from the javadocs and ensures
null is no longer allowed.
* Move to Gradle 4.8 RC1
* Use latest version of plugin
The current does not work with Gradle 4.8 RC1
* Switch to Gradle GA
* Add and configure build compare plugin
* add work-around for https://github.com/gradle/gradle/issues/5692
* work around https://github.com/gradle/gradle/issues/5696
* Make use of Gradle build compare with reference project
* Make the manifest more compare friendly
* Clear the manifest in compare friendly mode
* Remove animalsniffer from buildscript classpath
* Fix javadoc errors
* Fix doc issues
* reference Gradle issues in comments
* Conditionally configure build compare
* Fix some more doclint issues
* fix typo in build script
* Add sanity check to make sure the test task was replaced
Relates to #31324. It seems like Gradle has an inconsistent behavior and
the taks is not always replaced.
* Include number of non conforming tasks in the exception.
* No longer replace test task, create implicit instead
Closes#31324. The issue has full context in comments.
With this change the `test` task becomes nothing more than an alias for `utest`.
Some of the stand alone tests that had a `test` task now have `integTest`, and a
few of them that used to have `integTest` to run multiple tests now only
have `check`.
This will also help separarate unit/micro tests from integration tests.
* Revert "No longer replace test task, create implicit instead"
This reverts commit f1ebaf7d93e4a0a19e751109bf620477dc35023c.
* Fix replacement of the test task
Based on information from gradle/gradle#5730 replace the task taking
into account the task providres.
Closes#31324.
* Only apply build comapare plugin if needed
* Make sure test runs before integTest
* Fix doclint aftter merge
* PR review comments
* Switch to Gradle 4.8.1 and remove workaround
* PR review comments
* Consolidate task ordering
We added a way to close the yaml test client with #31575.
Such close method also needs to be called from the test suite though for
the additional clients to be closed.
We recently introduced a mechanism that allows to specify a node
selector as part of do sections (see #31471). When a node selector that
is not the default one is configured, a new client will be initialized
with the same properties as the default one, but with the specified
node selector. This commit improves such mechanism but also closing
the additional clients being created and adding equals/hashcode impl to
the custom node selector as they are cached into a map.
* remove left-over comment
* make sure of the property for plugins
* skip installing modules if these exist in the distribution
* Log the distrbution being ran
* Don't allow running with integ-tests-zip passed externally
* top level x-pack/qa can't run with oss distro
* Add support for matching objects in lists
Makes it possible to have a key that points to a list and assert that a
certain object is present in the list. All keys have to be present and
values have to match. The objects in the source list may have additional
fields.
example:
```
match: { 'nodes.$master.plugins': { name: ingest-attachment } }
```
* Update plugin and module tests to work with other distributions
Some of the tests expected that the integration tests will always be ran
with the `integ-test-zip` distribution so that there will be no other
plugins loaded.
With this change, we check for the presence of the plugin without
assuming exclusivity.
* Allow modules to run on other distros as well
To match the behavior of tets.distributions
* Add and use a new `contains` assertion
Replaces the previus changes that caused `match` to do a partial match.
* Implement PR review comments
This creates a YAML test "features" that indices if the cluster being
tested has xpack installed (`xpack`) or if it does *not* have xpack
installed (`no_xpack`). It uses those features to centralize skipping
a few tests that fail if xpack is installed.
The plan is to use this in a followup to skip docs tests that require
xpack when xpack is not installed. We *plan* to use the declaration
of required license level on the docs page to generate the required
`skip`.
Closes#30933.
David Turner
Simon Willnauer
Alpar Torok
Tim Brooks
Nick Knize
Boaz Leskes
Nhat Nguyen
Colin Goodheart-Smithe
Julie Tibshirani
Tal Levy
Nik Everett
Igor Motov
Seong-hyun, Oh
Armin Braun
Luca Cavanna
Ryan Ernst
Andy Bristol
Andrey Ershov
Przemyslaw Gomulka
Pratik Sanglikar
Jay Modi
Lee Hinman
lipsill
Zachary Tong
Yannick Welsch
Jason Tedor
Daniel Mitterdorfer
Martijn van Groningen
Jim Ferenczi
Kazuhiro Sera
Gordon Brown
Hendrik Muhs
Alan Woodward
Yogesh Gaikwad
Adrien Grand
Christoph Büscher
Vladimir Dolzhenko
Alexander Reelsen
Tim Vernum
Or Bin
Tanguy Leroux
Lee Hinman
Matt Weber
Jonathan Little
Tim Vernum
Ioannis Kakavas
Andrey Ershov
olcbean
Konrad Beiske