Backport of #50920. Part of #48366. Implement an API for listing,
importing and deleting dangling indices.
Co-authored-by: David Turner <david.turner@elastic.co>
This template was added for 7.0 for what I am guessing is a BWC issue related to deprecation
warnings. It unfortunately seems to cause failures because templates for these tests are not cleared
after the test (because these are upgrade tests).
Resolves#56363
* Remove usage of deprecated testCompile configuration
* Replace testCompile usage by testImplementation
* Make testImplementation non transitive by default (as we did for testCompile)
* Update CONTRIBUTING about using testImplementation for test dependencies
* Fail on testCompile configuration usage
This commit re-enables windows testing for archives packaging tests.
These were disabled previously because of constant failure due to
windows file locks, but the failure does not occur outside of CI, so
they are being re-enabled to further investigate the failure.
relates #50825
We can't use the high level create snapshot request any longer
since we changed some of its default parameters in `8` and those
are not understood by older versions like `7.4`.
Closes#57650
Almost every outbound message is serialized to buffers of 16k pagesize.
We were serializing these messages off the IO loop (and retaining the concrete message
instance as well) and would then enqueue it on the IO loop to be dealt with as soon as the
channel is ready.
1. This would cause buffers to be held onto for longer than necessary, causing less reuse on average.
2. If a channel was slow for some reason, not only would concrete message instances queue up for it, but also 16k of buffers would be reserved for each message until it would be written+flushed physically.
With this change, the serialization happens on the event loop which effectively limits the number of buffers that `N` IO-threads will ever use so long as messages are small and channels writable.
Also, this change dereferences the reference to the concrete outbound message as soon as it has been serialized to save some more on GC.
This reduces the GC time for a default PMC run by about 50% in experiments (3 nodes, 2G heap each, loopback ... obvious caveat is that GC isn't that heavy in the first place with recent changes but still a measurable gain).
I also expect it to be helpful for master node stability by causing less of a spike if master is e.g. hit by a large number of requests that are processed batched (e.g. shard snapshot status updates) and responded to in a short time frame all at once.
Obviously, the downside to this change is that it introduces more latency on the IO loop for the serialization. But since we read all of these messages on the IO loop as well I don't see it as much of a qualitative change really and the more predictable buffer use seems much more valuable relatively.
As the datastream information is stored in the `ClusterState.Metadata` we exposed
the `Metadata` to the `AsyncWaitStep#evaluateCondition` method in order for
the steps to be able to identify when a managed index is part of a DataStream.
If a managed index is part of a DataStream the rollover target is the DataStream
name and the highest generation index is the write index (ie. the rolled index).
(cherry picked from commit 6b410dfb78f3676fce1b7401f1628c1ca6fbd45a)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
The new translog bwc test checks a corruption case before 6.3.0.
However, it needs to restart the old node to reproduce, which does not
currently work given how testclusters works when plugins are installed.
As a workaround, this commit omits creating bwc tests before 6.3.0 only
when the default distribution is used.
fixes#57252
If an upgraded node is restarted multiple times without flushing a new
index commit, then we will wrongly exclude all commits from the starting
commits. This bug is reproducible with these minimal steps: (1) create
an empty index on 6.1.4 with translog retention disabled, (2) upgrade
the cluster to 7.7.0, (3) restart the upgraded the cluster. The problem
is that with the new translog policy can trim translog without having a
new index commit, while the existing commit still refers to the previous
translog generation.
Closes#57091
The packaging tests start elasticsearch in various ways. All of these
currently expect it is started asynchronously, yet some tests expect it
will fail to start and want to check the error output. This commit adds
a daemonize flag to the utility methods to start elasticsearch for such
cases, so that when the start method returns, all the error output
should already be available since the process will have exited.
relates #51716
Added support for decompression at LLRC and added integration test
(cherry picked from commit 2621452473e0c236aa28db749f782a24eca6c974)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Co-authored-by: Hakky54 <hakangoudberg@hotmail.com>
In normal operation native controllers are not expected to write
anything to stdout or stderr. However, if due to an error or
something unexpected with the environment a native controller
does write something to stdout or stderr then it will block if
nothing is reading that output.
This change makes the stdout and stderr of native controllers
reuse the same stdout and stderr as the Elasticsearch JVM (which
are by default redirected to es.stdout.log and es.stderr.log) so
that if something unexpected is written to native controller
output then:
1. The native controller process does not block, waiting for
something to read the output
2. We can see what the output was, making it easier to debug
obscure environmental problems
Backport of #56491
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Firstly, backport the use of tini as the Docker entrypoint. This was supposed
to have been done following #50277, but was missed. It isn't a direct backport
as this branch will continue using root as the initial Docker user.
Secondly, backport #55491 to use the official checksums when downloading tini.
Backport of #55115.
Replace calls to deprecate(String,Object...) with deprecateAndMaybeLog(...),
with an appropriate key, so that all messages can potentially be deduplicated.
In bash, checking for whether an env variable exists uses the -z test,
against a stringified env var, so that the test is actually whether the
env var is empty, but not necessarily undefined. We use this to test
whether JAVA_HOME is set, to determine whether the bundled jdk should be
used. In windows, this test is an actual "undefined" check. This commit
brings the behavior on two systems in sync, opting to allow for an empty
JAVA_HOME in windows to indicate the bundled jdk should be used.
closes#55134
* Add ValuesSource Registry and associated logic (#54281)
* Remove ValuesSourceType argument to ValuesSourceAggregationBuilder (#48638)
* ValuesSourceRegistry Prototype (#48758)
* Remove generics from ValuesSource related classes (#49606)
* fix percentile aggregation tests (#50712)
* Basic thread safety for ValuesSourceRegistry (#50340)
* Remove target value type from ValuesSourceAggregationBuilder (#49943)
* Cleanup default values source type (#50992)
* CoreValuesSourceType no longer implements Writable (#51276)
* Remove genereics & hard coded ValuesSource references from Matrix Stats (#51131)
* Put values source types on fields (#51503)
* Remove VST Any (#51539)
* Rewire terms agg to use new VS registry (#51182)
Also adds some basic AggTestCases for untested code
paths (and boilerplate for future tests once the IT are
converted over)
* Wire Cardinality aggregation to work with the ValuesSourceRegistry (#51337)
* Wire Percentiles aggregator into new VS framework (#51639)
This required a bit of a refactor to percentiles itself. Before,
the Builder would switch on the chosen algo to generate an
algo-specific factory. This doesn't work (or at least, would be
difficult) in the new VS framework.
This refactor consolidates both factories together and introduces
a PercentilesConfig object to act as a standardized way to pass
algo-specific parameters through the factory. This object
is then used when deciding which kind of aggregator to create
Note: CoreValuesSourceType.HISTOGRAM still lives in core, and will
be moved in a subsequent PR.
* Remove generics and target value type from MultiVSAB (#51647)
* fix checkstyle after merge (#52008)
* Plumb ValuesSourceRegistry through to QuerySearchContext (#51710)
* Convert RareTerms to new VS registry (#52166)
* Wire up Value Count (#52225)
* Wire up Max & Min aggregations (#52219)
* ValuesSource refactoring: Wire up Sum aggregation (#52571)
* ValuesSource refactoring: Wire up SigTerms aggregation (#52590)
* Soft immutability for VSConfig (#52729)
* Unmute testSupportedFieldTypes, fix Percentiles/Ranks/Terms tests (#52734)
Also fixes Percentiles which was incorrectly specified to only accept
numeric, but in fact also accepts Boolean and Date (because those are
numeric on master - thanks `testSupportedFieldTypes` for catching it!)
* VS refactoring: Wire up stats aggregation (#52891)
* ValuesSource refactoring: Wire up string_stats aggregation (#52875)
* VS refactoring: Wire up median (MAD) aggregation (#52945)
* fix valuesourcetype issue with constant_keyword field (#53041)x-pack/plugin/rollup/src/main/java/org/elasticsearch/xpack/rollup/job/RollupIndexer.java
this commit implements `getValuesSourceType` for
the ConstantKeyword field type.
master was merged into feature/extensible-values-source
introducing a new field type that was not implementing
`getValuesSourceType`.
* ValuesSource refactoring: Wire up Avg aggregation (#52752)
* Wire PercentileRanks aggregator into new VS framework (#51693)
* Add a VSConfig resolver for aggregations not using the registry (#53038)
* Vs refactor wire up ranges and date ranges (#52918)
* Wire up geo_bounds aggregation to ValuesSourceRegistry (#53034)
This commit updates the geo_bounds aggregation to depend
on registering itself in the ValuesSourceRegistry
relates #42949.
* VS refactoring: convert Boxplot to new registry (#53132)
* Wire-up geotile_grid and geohash_grid to ValuesSourceRegistry (#53037)
This commit updates the geo*_grid aggregations to depend
on registering itself in the ValuesSourceRegistry
relates to the values-source refactoring meta issue #42949.
* Wire-up geo_centroid agg to ValuesSourceRegistry (#53040)
This commit updates the geo_centroid aggregation to depend
on registering itself in the ValuesSourceRegistry.
relates to the values-source refactoring meta issue #42949.
* Fix type tests for Missing aggregation (#53501)
* ValuesSource Refactor: move histo VSType into XPack module (#53298)
- Introduces a new API (`getBareAggregatorRegistrar()`) which allows plugins to register aggregations against existing agg definitions defined in Core.
- This moves the histogram VSType over to XPack where it belongs. `getHistogramValues()` still remains as a Core concept
- Moves the histo-specific bits over to xpack (e.g. the actual aggregator logic). This requires extra boilerplate since we need to create a new "Analytics" Percentile/Rank aggregators to deal with the histo field. Doubly-so since percentiles/ranks are extra boiler-plate'y... should be much lighter for other aggs
* Wire up DateHistogram to the ValuesSourceRegistry (#53484)
* Vs refactor parser cleanup (#53198)
Co-authored-by: Zachary Tong <polyfractal@elastic.co>
Co-authored-by: Zachary Tong <zach@elastic.co>
Co-authored-by: Christos Soulios <1561376+csoulios@users.noreply.github.com>
Co-authored-by: Tal Levy <JubBoy333@gmail.com>
* First batch of easy fixes
* Remove List.of from ValuesSourceRegistry
Note that we intend to have a follow up PR dealing with the mutability
of the registry, so I didn't even try to address that here.
* More compiler fixes
* More compiler fixes
* More compiler fixes
* Precommit is happy and so am I
* Add new Core VSTs to tests
* Disabled supported type test on SigTerms until we can backport it's fix
* fix checkstyle
* Fix test failure from semantic merge issue
* Fix some metaData->metadata replacements that got lost
* Fix list of supported types for MinAggregator
* Fix list of supported types for Avg
* remove unused import
Co-authored-by: Zachary Tong <polyfractal@elastic.co>
Co-authored-by: Zachary Tong <zach@elastic.co>
Co-authored-by: Christos Soulios <1561376+csoulios@users.noreply.github.com>
Co-authored-by: Tal Levy <JubBoy333@gmail.com>
Today we pass the `RepositoriesService` to the searchable snapshots plugin
during the initialization of the `RepositoryModule`, forcing the plugin to be a
`RepositoryPlugin` even though it does not implement any repositories.
After discussion we decided it best for now to pass this in via
`Plugin#createComponents` instead, pending some future work in which plugins
can depend on services more dynamically.
I've noticed that a lot of our tests are using deprecated static methods
from the Hamcrest matchers. While this is not a big deal in any
objective sense, it seems like a small good thing to reduce compilation
warnings and be ready for a new release of the matcher library if we
need to upgrade. I've also switched a few other methods in tests that
have drop-in replacements.
Currently forbidden apis accounts for 800+ tasks in the build. These
tasks are aggressively created by the plugin. In forbidden apis 3.0, we
will get task avoidance
(https://github.com/policeman-tools/forbidden-apis/pull/162), but we
need to ourselves use the same task avoidance mechanisms to not trigger
these task creations. This commit does that for our foribdden apis
usages, in preparation for upgrading to 3.0 when it is released.
Backport of #55073.
We added tasks to build an ARM distribution and Docker image, but didn't
provide any way to run packaging tests against them. Add extra loops on
the possible Architecture values, and skip tasks that can't be run on
the current Architecture.
Apply the :distribution:archives naming convention to some of the Docker
sub-projects, so that we have a more consistent naming scheme.
Also, we've seen some examples of Docker packaging tests failing sporadically
when they try to clean up the temp directory, citing a not-empty
directory. Ensure that any running container is removed before cleaning
up the temp dir, in an effort to avoid this problem.
This change converts the module and plugin parameters
for testClusters to be lazy. Meaning that the values
are not resolved until they are actually used. This
removes the requirement to use project.afterEvaluate to
be able to resolve the bundle artifact.
Note - this does not completely remove the need for afterEvaluate
since it is still needed for the custom resource extension.
This commit includes a number of changes to reduce overall build
configuration time. These optimizations include:
- Removing the usage of the 'nebula.info-scm' plugin. This plugin
leverages jgit to load read various pieces of VCS information. This
is mostly overkill and we have our own minimal implementation for
determining the current commit id.
- Removing unnecessary build dependencies such as perforce and jgit
now that we don't need them. This reduces our classpath considerably.
- Expanding the usage lazy task creation, particularly in our
distribution projects. The archives and packages projects create
lots of tasks with very complex configuration. Avoiding the creation
of these tasks at configuration time gives us a nice boost.
`scripted_metric` did not work with cross cluster search because it
assumed that you'd never perform a partial reduction, serialize the
results, and then perform a final reduction. That
serialized-after-partial-reduction step was broken.
This is also required to support #54758.
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
This drop the "top level" pipeline aggregators from the aggregation
result tree which should save a little memory and a few serialization
bytes. Perhaps more imporantly, this provides a mechanism by which we
can remove *all* pipelines from the aggregation result tree. This will
save quite a bit of space when pipelines are deep in the tree.
Sadly, doing this isn't simple because of backwards compatibility. Nodes
before 7.7.0 *need* those pipelines. We provide them by setting passing
a `Supplier<PipelineTree>` into the root of the aggregation tree that we
only call if we need to serialize to a version before 7.7.0.
This solution works for cross cluster search because we always reduce
the aggregations in each remote cluster and then forward them back to
the coordinating node. Its quite possible that the coordinating node
needs the pipeline (say it is version 7.1.0) and the gateway node in the
remote cluster doesn't (version 7.7.0). In that case the data nodes
won't send the pipeline aggregations back to the gateway node.
Critically, the gateway node *will* send the pipeline aggregations back
to the coordinating node. This is all managed with that
`Supplier<PipelineTree>`, but *how* it is managed is a bit tricky.
Currently the remote info api has added a number of possible fields
(proxy, num_socket_connections, etc) that are available in proxy mode.
These fields are not aligned with what the settings are named. This
commit modifies this API to align with the settings.
This commit changes the pre_filter_shard_size default from 128 to unspecified.
This allows to apply heuristics based on the request and the target indices when deciding
whether the can match phase should run or not. When unspecified, this pr runs the can match phase
automatically if one of these conditions is met:
* The request targets more than 128 shards.
* The request contains read-only indices.
* The primary sort of the query targets an indexed field.
Users can opt-out from this behavior by setting the `pre_filter_shard_size` to a static value.
Closes#39835
Backport of #53126.
Convert the Wildfly tests to run using Docker Compose. This drastically
simplifies the build setup, and will hopefully make the tests more
resilient.
It's simple to deprecate a field used in an ObjectParser just by adding deprecation
markers to the relevant ParseField objects. The warnings themselves don't currently
have any context - they simply say that a deprecated field has been used, but not
where in the input xcontent it appears. This commit adds the parent object parser
name and XContentLocation to these deprecation messages.
Note that the context is automatically stripped from warning messages when they
are asserted on by integration tests and REST tests, because randomization of
xcontent type during these tests means that the XContentLocation is not constant
Stuart Tettemer
Rory Hunter
Lee Hinman
Rene Groeschke
Dan Hermann
Ryan Ernst
Mark Vieira
Armin Braun
Andrei Dan
Julie Tibshirani
Gordon Brown
Nhat Nguyen
David Roberts
Ignacio Vera
Rene Groeschke
Hendrik Muhs
Igor Motov
Mark Tozzi
David Turner
William Brafford
Jake Landis
Nik Everett
Jason Tedor
Tim Brooks
Jim Ferenczi
Alan Woodward