The watcher stats implementation tries to look at all queued watches
before preparing the result. We want to cast these to a
WatchExecutionTask to extract the context to prepare the stats for
queued watches. The problem is that not all tasks on the watcher queue
were WatchExecutionTask. This is because a manually executed watch was
not even at all wrapped in a WatchExecutionTask. Moreover, we were using
ExecutorService#submit(Runnable) which would wrap the Runnable in a
FutureTask<?>. This commit addresses this by using a WatchExecutionTask,
and also using ExecutorService#execute(Runnable) so that no wrapping
occurs. This will let us continue with the assumption that all queued
tasks are WatchExecutionTasks.
This commit removes the "doc" type from watcher internal indexes.
The template still carries the "_doc" type since that is needed for
the internal representation.
This impacts the .watches, .triggered-watches, and .watch-history indexes.
External consumers do not need any changes since all external calls
go through the _watcher API, and should not interact with the the .index directly.
Relates #38637
Previously, Watcher only attached its listener to indices that started
with the prefix `.watches`, which causes Watcher to silently fail to
schedule newly created Watches if the `.watches` alias is redirected to
an index that does not start with `.watches`.
Watcher now attaches the listener to all indices, so that Watcher can
respond to changes in which index has the `.watches` alias.
Also adjusts the tests to randomly use non-prefixed concrete indices
for .watches and .triggered_watches.
Backport of #39325
When ILM is disabled and Watcher is setting up the templates and policies for
the watch history indices, it will now use a template that does not have the
`index.lifecycle.name` setting, so that indices are not created with the
setting.
This also adds tests for the behavior, and changes the cluster state used in
these tests to be real instead of mocked.
Resolves#38805
* Remove Hipchat support from Watcher (#39199)
Hipchat has been shut down and has previously been deprecated in
Watcher (#39160), therefore we should remove support for these actions.
* Add migrate note
This commit makes `TransformIntegrationTests` into a standard integration test, as
opposed to using `TimeWarp`, which registers the mock component
`ScheduleEngineTriggerMock` to trigger watches.
The simplification may help with flakiness we've observed `TimeWarp, as in #37882.
The watcher trigger service could attempt to modify the perWatchStats
map simultaneously from multiple threads. This would cause the
internal state to become inconsistent, in particular the count()
method may return an incorrect value for the number of watches.
This changes replaces the implementation of the map with a
ConcurrentHashMap so that its internal state remains consistent even
when accessed from mutiple threads.
Backport of: #39092
When shutting down Watcher, the `bulkProcessor` is null if watcher has been
disabled in the configuration. This protects the flush and close calls with a
check for watcher enabled to avoid a NullPointerException
Resolves#38798
Change the formatting for Watcher.status.lastCheck and lastMetCondition
to be the same as Watcher.status.state.timestamp. These should all have
only millisecond precision
closes#38619
backport #38626
fix tests to use clock in milliseconds precision in watcher code
make sure the date comparison in string format is using same formatters
some of the code was modified in #38514 possibly because of merge conflicts
closes#38581
Backport #38738
When the millisecond part of a timestamp is 0 the toString
representation in java-time is omitting the millisecond part (joda was
not). The Search response is returning timestamps formatted with
WatcherDateTimeUtils, therefore comparisons of strings should be done
with the same formatter
relates #27330
BackPort #38505
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
In #38333 and #38350 we moved away from the `discovery.zen` settings namespace
since these settings have an effect even though Zen Discovery itself is being
phased out. This change aligns the documentation and the names of related
classes and methods with the newly-introduced naming conventions.
The test is now expected to be always passing no matter what the random
locale is. This is fixed with using jdk ZoneId.systemDefault() in both
the test and CronEvalTool
closes#35687
Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
* move watcher to seq# occ
* top level set
* fix parsing and missing setters
* share toXContent for PutResponse and rest end point
* fix redacted password
* fix username reference
* fix deactivate-watch.asciidoc have seq no references
* add seq# + term to activate-watch.asciidoc
* more doc fixes
The apache commons http client implementations recently released
versions that solve TLS compatibility issues with the new TLS engine
that supports TLSv1.3 with JDK 11. This change updates our code to
use these versions since JDK 11 is a supported JDK and we should
allow the use of TLSv1.3.
This commit allows JIRA API fields that require a list of key/value
pairs (maps), such as JIRA "components" to use use template snippets
(e.g. {{ctx.payload.foo}}). Prior to this change the templated value
(not the de-referenced value) would be sent via the API and error.
Closes#30068
This commit adds deprecation warnings for index actions
and search actions when executed via watcher. Unit and
integration tests updated accordingly.
relates #35190
* Exit batch files explictly using ERRORLEVEL
This makes sure the exit code is preserved when calling the batch
files from different contexts other than DOS
Fixes#29582
This also fixes specific error codes being masked by an explict
exit /b 1
causing the useful exitcodes from ExitCodes to be lost.
* fix line breaks for calling cli to match the bash scripts
* indent size of bash files is 2, make sure editorconfig does the same for bat files
* update indenting to match bash files
* update elasticsearch-keystore.bat indenting
* Update elasticsearch-node.bat to exit outside of endlocal
* Use ILM for Watcher history deletion
This commit adds an index lifecycle policy for the `.watch-history-*` indices.
This policy is automatically used for all new watch history indices.
This does not yet remove the automatic cleanup that the monitoring plugin does
for the .watch-history indices, and it does not touch the
`xpack.watcher.history.cleaner_service.enabled` setting.
Relates to #32041
Removes all sensitive settings (passwords, auth tokens, urls, etc...) for
watcher notifications accounts. These settings were deprecated (and
herein removed) in favor of their secure sibling that is set inside the
elasticsearch keystore. For example:
`xpack.notification.email.account.<id>.smtp.password`
is no longer a valid setting, and it is replaced by
`xpack.notification.email.account.<id>.smtp.secure_password`
This commit removes the fallback for SSL settings. While this may be
seen as a non user friendly change, the intention behind this change
is to simplify the reasoning needed to understand what is actually
being used for a given SSL configuration. Each configuration now needs
to be explicitly specified as there is no global configuration or
fallback to some other configuration.
Closes#29797
This adds a configurable whitelist to the HTTP client in watcher. By
default every URL is allowed to retain BWC. A dynamically configurable
setting named "xpack.http.whitelist" was added that allows to
configure an array of URLs, which can also contain simple regexes.
Closes#29937
Today, a setting can declare that its validity depends on the values of other
related settings. However, the validity of a setting is not always checked
against the correct values of its dependent settings because those settings'
correct values may not be available when the validator runs.
This commit separates the validation of a settings updates into two phases,
with separate methods on the `Setting.Validator` interface. In the first phase
the setting's validity is checked in isolation, and in the second phase it is
checked again against the values of its related settings. Most settings only
use the first phase, and only the few settings with dependencies make use of
the second phase.
As suggested in #36775, this pull request renames the following methods:
ClusterBlocks.hasGlobalBlock(int)
ClusterBlocks.hasGlobalBlock(RestStatus)
ClusterBlocks.hasGlobalBlock(ClusterBlockLevel)
to something that better reflects the property of the ClusterBlock that is searched for:
ClusterBlocks.hasGlobalBlockWithId(int)
ClusterBlocks.hasGlobalBlockWithStatus(RestStatus)
ClusterBlocks.hasGlobalBlockWithLevel(ClusterBlockLevel)
When the script contexts were created in 6, the use of params.ctx was
deprecated. This commit cleans up that code and ensures that params.ctx
is null in both watcher script contexts.
Relates: #34059
In previous commits only the stored toXContent version of a search
request was using the old format. However an executed search request was
already disabling hit counts. In 7.0 hit counts will stay enabled by
default to allow for proper migration.
Closes#36177
This commit adds the last sequence number and primary term of the last operation that have
modified a document to `GetResult` and uses it to power the Update API.
Relates #36148
Relates #10708
This fixes two bugs about watcher notifications:
* registering accounts that had only secure settings was not possible before;
these accounts are very much practical for Slack and PagerDuty integrations.
* removes the limitation that, for an account with both secure and cluster settings,
the admin had to first change/add the secure settings and only then add the
dependent dynamic cluster settings. The reverse order would trigger a
SettingsException for an incomplete account.
The workaround is to lazily instantiate account objects, hoping that when accounts
are instantiated all the required settings are in place. Previously, the approach
was to greedily validate all the account settings by constructing the account objects,
even if they would not ever be used by actions. This made sense in a world where
all the settings were set by a single API. But given that accounts have dependent
settings (that must be used together) that have to be changed using different APIs
(POST _nodes/reload_secure_settings and PUT _cluster/settings), the settings group
would technically be in an invalid state in between the calls.
This fix builds account objects, and validates the settings, when they are
needed by actions.
There are certain BootstrapCheck checks that may need access environment-specific
values. Watcher's EncryptSensitiveDataBootstrapCheck passes in the node's environment
via a constructor to bypass the shortcoming in BootstrapContext. This commit
pulls in the node's environment into BootstrapContext.
Another case is found in #36519, where it is useful to check the state of the
data-path. Since PathUtils.get and Paths.get are forbidden APIs, we rely on
the environment to retrieve references to things like node data paths.
This means that the BootstrapContext will have the same Settings used in the
Environment, which currently differs from the Node's settings.
This commit converts the watcher execution context to use the joda
compat java time objects. It also again removes the joda methods from
the painless whitelist.
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).
Relates #33028
This change adds the support for rest_total_hits_as_int
in the watcher search inputs. Setting this parameter in the request
will transform the search response to contain the total hits as
a number (instead of an object).
Note that this parameter is currently a noop since #35849 is not
merged.
Closes#36008
The NotificationService (base class for SlackService, HipchatService ...) has both dynamic
cluster settings and SecureSettings and builds the clients (Account) that are used to comm
with external services. This commit fixes an important bug about updating/reloading any
of these settings (both Secure and dynamic cluster). Briefly the bug is due to the fact that
both the secure settings as well as the dynamic node scoped ones can be updated
independently, but when constructing the clients some of the settings might not be visible.
This commit removes the use of AbstractComponent in xpack where it was
still being extended. It has been replaced with explicit logger
declarations.
See #34488
The trigger engine did always create a new schedule data structure, when
the watcher indexing listener called an add. However the indexing
listener also called add, when the watch status was updated. This means,
that upon a watch status update the watch got retriggered, potentially
waiting a defined interval from the watch status update onwards, instead
of waiting from the last run.
This commit only updates the schedule in the trigger engine, if it
actually has changed, otherwise the existing schedule will not be
touched. This has two results
1. If a watch is updated by an execution, the existing interval will not
be touched (meaning the scheduled time will not move forward).
2. If a watch is updated by a user, but the schedule is not changed, it
will not be reset from the update (for example starting to count from 5
minutes again, if the interval was set to 5 minutes).
Furthermore some minor cleanups were applied, making variables final in
the ctor, preventing double creation of variables.
This commit switches from using java util's default timezone method to
using joda. The former can cause problems when the string representation
of the timezone is unknown to joda.
closes#35518
The elasticsearch-croneval CLI tool uses local dates to display when
something gets triggered the next time. This is very confusing.
This commit ensures, that UTC and local timezone times will be written
out.
The output looks like this and contains localized dates for each trigger
date as well as for `now`.
Now is [Tue, 28 Aug 2018 17:23:51 +0000] in UTC, local time is [ᏔᎵᏁ, 28 ᎦᎶ 2018 12:23:51 -0500]
Here are the next 10 times this cron expression will trigger:
1. Mon, 2 Jan 2040 11:00:00 +0000
ᏉᏅᎯ, 2 ᎤᏃ 2040 06:00:00 -0500
2. ...
This also removes an old outstanding TODO to use the jopt parsing to
cast the count to an integer instead of doing it ourselves.
* Watcher: fix metric stats names
The current watcher stats metric names doesn't match the current
documentation. This commit fixes the behavior of `queued_watches`
metric, deprecates `pending_watches` metric and adds `current_watches`
to match the documented behavior. It also fixes the documentation, which
introduced `executing_watches` metric that was never added.
Fixes#34865
Stop passing `Settings` to `AbstractComponent`'s ctor. This allows us to
stop passing around `Settings` in a *ton* of places. While this change
touches many files, it touches them all in fairly small, mechanical
ways, doing a few things per file:
1. Drop the `super(settings);` line on everything that extends
`AbstractComponent`.
2. Drop the `settings` argument to the ctor if it is no longer used.
3. If the file doesn't use `logger` then drop `extends
AbstractComponent` from it.
4. Clean up all compilation failure caused by the `settings` removal
and drop any now unused `settings` isntances and method arguments.
I've intentionally *not* removed the `settings` argument from a few
files:
1. TransportAction
2. AbstractLifecycleComponent
3. BaseRestHandler
These files don't *need* `settings` either, but this change is large
enough as is.
Relates to #34488
Drops the `Settings` member from `AbstractComponent`, moving it from the
base class on to the classes that use it. For the most part this is a
mechanical change that doesn't drop `Settings` accesses. The one
exception to this is naming threads where it switches from an invocation
that passes `Settings` and extracts the node name to one that explicitly
passes the node name.
This change doesn't drop the `Settings` argument from
`AbstractComponent`'s ctor because this change is big enough as is.
We'll do that in a follow up change.
With this commit we cleanup hand-coded duplicate checks in XContent
parsing. They were necessary previously but since we reconfigured the
underlying parser in #22073 and #22225, these checks are obsolete and
were also ineffective unless an undocumented system property has been
set. As we also remove this escape hatch, we can remove the additional
checks as well.
Closes#22253
Relates #34588
Right now, watches fail on runtime, when invalid email addresses are
used.
All those fields can be checked on parsing, if no mustache is used in
any email address template. In that case we can return immediate
feedback, that invalid email addresses should not be specified when
trying to store a watch.
In 54cb890 a setting for testing only was introduced, that delayed the start up of watcher. With the changes of how is watcher is started/stopped over time, this is not needed anymore.
Since all calls to `ESLoggerFactory` outside of the logging package were
deprecated, it seemed like it'd simplify things to migrate all of the
deprecated calls and declare `ESLoggerFactory` to be package private.
This does that.
Drops the last logging constructor that takes `Settings` because it is
no longer needed.
Watcher goes through a lot of effort to pass `Settings` to `Logger`
constructors and dropping `Settings` from all of those calls allowed us
to remove quite a bit of log-based ceremony from watcher.
This enables Elasticsearch to use the JVM-wide configured
PKCS#11 token as a keystore or a truststore for its TLS configuration.
The JVM is assumed to be configured accordingly with the appropriate
Security Provider implementation that supports PKCS#11 tokens.
For the PKCS#11 token to be used as a keystore or a truststore for an
SSLConfiguration, the .keystore.type or .truststore.type must be
explicitly set to pkcs11 in the configuration.
The fact that the PKCS#11 token configuration is JVM wide implies that
there is only one available keystore and truststore that can be used by TLS
configurations in Elasticsearch.
The PIN for the PKCS#11 token can be set as a truststore parameter in
Elasticsearch or as a JVM parameter ( -Djavax.net.ssl.trustStorePassword).
The basic goal of enabling PKCS#11 token support is to allow PKCS#11-NSS in
FIPS mode to be used as a FIPS 140-2 enabled Security Provider.
This commit removes the use of ExecutableScript from watcher in favor of
custom script contexts for both watcher condition scripts and transform
scripts.
`Settings` is no longer required to get a `Logger` and we went to quite
a bit of effort to pass it to the `Logger` getters. This removes the
`Settings` from all of the logger fetches in security and x-pack:core.
This commit adds the ability to plug in compilation of custom contexts
in mock script engine. This is needed for testing plugins which add
custom contexts like watcher.
Watcher is using a lot of so called TextTemplate fields in a watch
definition, which can use mustache to insert the watch id for example.
For the user it is non-obvious which field is just a string field or
which field is a text template.
This also means, that for every such field, we currently do a script
compilation, even if the field does not contain any mustache syntax.
This will lead to an increased script cache churn, because those
compiled scripts (that only contain a string), will evict other scripts.
On top of that, this also means that an unneeded compilation has
happened, instead of returning that string immediately.
The usages of mustache templating are in all of the actions (most of the time far
more than one compilation) as well as most of the inputs.
Especially when running a lot of watches in parallel, this will reduce
execution times and help reuse of real scripts.
This change cleans up "unused variable" warnings. There are several cases were we
most likely want to suppress the warnings (especially in the client documentation test
where the snippets contain many unused variables). In a lot of cases the unused
variables can just be deleted though.
This commit reverts most of #33157 as it introduces another race
condition and breaks a common case of watcher, when the first watch is
added to the system and the index does not exist yet.
This means, that the index will be created, which triggers a reload, but
during this time the put watch operation that triggered this is not yet
indexed, so that both processes finish roughly add the same time and
should not overwrite each other but act complementary.
This commit reverts the logic of cleaning out the ticker engine watches
on start up, as this is done already when the execution is paused -
which also gets paused on the cluster state listener again, as we can be
sure here, that the watches index has not yet been created.
This also adds a new test, that starts a one node cluster and emulates
the case of a non existing watches index and a watch being added, which
should result in proper execution.
Closes#33320
Changes the default of the `node.name` setting to the hostname of the
machine on which Elasticsearch is running. Previously it was the first 8
characters of the node id. This had the advantage of producing a unique
name even when the node name isn't configured but the disadvantage of
being unrecognizable and not being available until fairly late in the
startup process. Of particular interest is that it isn't available until
after logging is configured. This forces us to use a volatile read
whenever we add the node name to the log.
Using the hostname is available immediately on startup and is generally
recognizable but has the disadvantage of not being unique when run on
machines that don't set their hostname or when multiple elasticsearch
processes are run on the same host. I believe that, taken together, it
is better to default to the hostname.
1. Running multiple copies of Elasticsearch on the same node is a fairly
advanced feature. We do it all the as part of the elasticsearch build
for testing but we make sure to set the node name then.
2. That the node.name defaults to some flavor of "localhost" on an
unconfigured box feels like it isn't going to come up too much in
production. I expect most production deployments to at least set the
hostname.
As a bonus, production deployments need no longer set the node name in
most cases. At least in my experience most folks set it to the hostname
anyway.
Currently a watch execution results in one bulk request, when the
triggered watches are written into the that index, that need to be
executed. However the update of the watch status, the creation of the
watch history entry as well as the deletion of the triggered watches
index are all single document operations.
This can have quite a negative impact, once you are executing a lot of
watches, as each execution results in 4 documents writes, three of them
being single document actions.
This commit switches to a bulk processor instead of a single document
action for writing watch history entries and deleting triggered watch
entries. However the defaults are to run synchronous as before because
the number of concurrent requests is set to 0. This also fixes a bug,
where the deletion of the triggered watch entry was done asynchronously.
However if you have a high number of watches being executed, you can
configure watcher to delete the triggered watches entries as well as
writing the watch history entries via bulk requests.
The triggered watches deletions should still happen in a timely manner,
where as the history entries might actually be bound by size as one
entry can easily have 20kb.
The following settings have been added:
- xpack.watcher.bulk.actions (default 1)
- xpack.watcher.bulk.concurrent_requests (default 0)
- xpack.watcher.bulk.flush_interval (default 1s)
- xpack.watcher.bulk.size (default 1mb)
The drawback of this is of course, that on a node outage you might end
up with watch history entries not being written or watches needing to be
executing again because they have not been deleted from the triggered
watches index. The window of these two cases increases configuring the bulk processor to wait to reach certain thresholds.
Change the logging infrastructure to handle when the node name isn't
available in `elasticsearch.yml`. In that case the node name is not
available until long after logging is configured. The biggest change is
that the node name logging no longer fixed at pattern build time.
Instead it is read from a `SetOnce` on every print. If it is unset it is
printed as `unknown` so we have something that fits in the pattern.
On normal startup we don't log anything until the node name is available
so we never see the `unknown`s.
Watcher validates `action.auto_create_index` upon startup. If a user
specifies a pattern that does not contain watcher indices, it raises an
error message to include a list of three indices. However, the indices
are separated by a comma and a space which is not considered in parsing.
With this commit we change the error message string so it does not
contain the additional space thus making it more straightforward to copy
it to the configuration file.
Closes#33369
Relates #33497
This change collapses all metrics aggregations classes into a single package `org.elasticsearch.aggregations.metrics`.
It also restricts the visibility of some classes (aggregators and factories) that should not be used outside of the package.
Relates #22868
Drops and unused logging constructor, simplifies a rarely used one, and
removes `Settings` from a third. There is now only a single logging ctor
that takes `Settings` and we'll remove that one in a follow up change.
This commit ensures that when `TriggerService.start()` is called,
we ensure in the trigger engine implementations that current watches are
removed instead of adding to the existing ones in
`TickerScheduleTriggerEngine.start()`
Two additional minor fixes, where the result remains the same but less code gets executed.
1. If the node is not a data node, we forgot to set the status to
STARTING when watcher is being started. This should not be a big issue,
because a non-data node does not spent a lot of time loading as there
are no watches which need loading.
2. If a new cluster state came in during a reload, we had two checks in
place to abort loading the current one. The first one before we load all
the watches of the local node and the second before watcher is starting
with those new watches. Turned out that the first check was not
returning, which meant we always tried to load all the watches, and then
would fail on the second check. This has been fixed here.
When a node dies that carries a watcher shard or a shard is relocated to
another node, then watcher needs not only trigger a reload on the node
where the shard relocation happened, but also on other nodes where
copies of this shard, as different watches may need to be loaded.
This commit takes the change of remote nodes into account by not only
storing the local shard allocation ids in the WatcherLifeCycleService,
but storing a list of ShardRoutings based on the local active shards.
This also fixes some tests, which had a wrong assumption. Using
`TestShardRouting.newShardRouting` in our tests for cluster state
creation led to the issue of always creating new allocation ids which
implicitely lead to a reload.
This commit removes the unused User class from the protocol project.
This class was originally moved into protocol in preparation for moving
more request and response classes, but given the change in direction
for the HLRC this is no longer needed. Additionally, this change also
changes the package name for the User object in x-pack/plugin/core to
its original name.
The code introduced in 3fa36807f8 to fix
an issue with crons always returning -1 was not very readable. This
implementation uses streams to improve readability.
CronEvalTool prints an error only for cron expressions that result in
no upcoming time events.
If a cron expression results in less than the specified count
(default 10) time events, now all the coming times are printed
without displaying error message.
Closes#32735
When a list/an array of cron expressions is provided, and one of those addresses
is already expired, the expired one will be considered as an option
instead of the valid next one.
This commit also reduces the visibility of the CronnableSchedule and
refactors a comparator to look like java 8.
This removes custom Response classes that extend `AcknowledgedResponse` and do nothing, these classes are not needed and we can directly use the non-abstract super-class instead.
While this appears to be a large PR, no code has actually changed, only class names have been changed and entire classes removed.
The HipChatMessage#render is no longer used, and instead the
HipChatAccount#render is used in the ExecutableHipChatAction. Only a
test that validated the HttpProxy used this render method still. This
commit cleans it up.
The auth.basic package was an example of a single implementation
interface that leaked into many different classes. In order to clean
this up, the HttpAuth interface, factories, and Registries all were
removed and the single implementation, BasicAuth, was substituted in all
cases. This removes some dependenies between Auth and the Templates,
which can now use static methods on BasicAuth. BasicAuth was also moved
into the http package and all of the other classes were removed.
The PagerDuty v1 API is EOL and will stop accepting new accounts
shortly. This commit swaps out the watcher use of the v1 API with the
new v2 API. It does not change anything about the existing watcher
API.
Closes#32243
The User class has been moved to the protocol project for upcoming work
to add more security APIs to the high level rest client. As part of
this change, the toString method no longer uses a custom output method
from MetadataUtils and instead just relies on Java's toString
implementation.
The error message mentioned in #30094 does not link to to a cause by the
test itself, as there are still inflight requests according to the
circuit breaker.
I ran this test class 100k times on bare metal and could not reproduce
it. I will reenable the test for now.
Closes#30094
David Roberts
Yannick Welsch
Like
Benjamin Trent
Julie Tibshirani
Jason Tedor
Jake Landis
Gordon Brown
Lee Hinman
Tim Vernum
Przemyslaw Gomulka
Christoph Büscher
David Turner
Boaz Leskes
Jay Modi
Luca Cavanna
Martijn Laarman
Albert Zaharovits
Alexander Reelsen
Alpar Torok
Christophe Bismuth
Tanguy Leroux
Michael Basnight
Tal Levy
Ryan Ernst
Jim Ferenczi
Alan Woodward
Igor Motov
Nik Everett
Pratik Sanglikar
Daniel Mitterdorfer
Ioannis Kakavas
Kazuhiro Sera
Or Bin
lipsill