This PR adds an internal REST API for querying context information about
Painless whitelists.
Commands include the following:
GET /_scripts/painless/_context -- retrieves a list of contexts
GET /_scripts/painless/_context?context=%name% retrieves all available
information about the API for this specific context
As discovered in #40041, when parsing certificates from files, the
SUN Security Provider normalizes DNs from parsed certificates by
adding spaces between RDNs, while the BouncyCastle one (which we
use in FIPS tests) does not.
We could proceed to normalize the DNs in the same manner in this
test by using i.e. the Unbound LDAP SDK but since the goal of this
test is to validate that we do get to read these exact certificates
from our trust sources and not to validate subject DNs, this commit
changes the test to check the serial number instead
Resolves: #40041
The monitoring bulk API accepts the same format as the bulk API, yet its concept
of types is different from "mapping types" and the deprecation warning is only
emitted as a side-effect of this API reusing the parsing logic of bulk requests.
This commit extracts the parsing logic from `_bulk` into its own class with a
new flag that allows to configure whether usage of `_type` should emit a warning
or not. Support for payloads has been removed for simplicity since they were
unused.
@jakelandis has a separate change that removes this notion of type from the
monitoring bulk API that we are considering bringing to 8.0.
This commit introduces the forget follower API. This API is needed in cases that
unfollowing a following index fails to remove the shard history retention leases
on the leader index. This can happen explicitly through user action, or
implicitly through an index managed by ILM. When this occurs, history will be
retained longer than necessary. While the retention lease will eventually
expire, it can be expensive to allow history to persist for that long, and also
prevent ILM from performing actions like shrink on the leader index. As such, we
introduce an API to allow for manual removal of the shard history retention
leases in this case.
This change adds two new cluster privileges:
* manage_data_frame_transforms
* monitor_data_frame_transforms
And two new built-in roles:
* data_frame_transforms_admin
* data_frame_transforms_user
These permit access to the data frame transform endpoints.
(Index privileges are also required on the source and
destination indices for each data frame transform, but
since these indices are configurable they it is not
appropriate to grant them via built-in roles.)
The data frame plugin allows users to create feature indexes by pivoting a source index. In a
nutshell this can be understood as reindex supporting aggregations or similar to the so called entity
centric indexing.
Full history is provided in: feature/data-frame-transforms
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.
The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).
Given all these issues, it seems that this custom timeout mechanism
gives little benefits while causing a lot of harm. We should rather rely
on connect and socket timeout exposed by the underlying http client
and accept that a request can overall take longer than the configured
timeout, which is the case even with a single retry anyways.
This commit removes the `maxRetryTimeout` setting and all of its usages.
Updated IndexTemplateMetaData to use ObjectParser.
The IndexTemplateMetaData class used old parsing logic and was not
resiliant to new fields. This commit updates it to use the
ConstructingObjectParser and allow unknown fields.
Relates #36938
Co-authored-by: Michael Basnight <mbasnight@gmail.com>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
This test has been disabled since November 2018, but I was not able to reproduce
the failure. Re-enabling this so we can see the full log and get more context if
it fails again.
Relates to #35514
Elasticsearch has long [supported](https://www.elastic.co/guide/en/elasticsearch/reference/current/docs-index_.html#index-versioning) compare and set (a.k.a optimistic concurrency control) operations using internal document versioning. Sadly that approach is flawed and can sometime do the wrong thing. Here's the relevant excerpt from the resiliency status page:
> When a primary has been partitioned away from the cluster there is a short period of time until it detects this. During that time it will continue indexing writes locally, thereby updating document versions. When it tries to replicate the operation, however, it will discover that it is partitioned away. It won’t acknowledge the write and will wait until the partition is resolved to negotiate with the master on how to proceed. The master will decide to either fail any replicas which failed to index the operations on the primary or tell the primary that it has to step down because a new primary has been chosen in the meantime. Since the old primary has already written documents, clients may already have read from the old primary before it shuts itself down. The version numbers of these reads may not be unique if the new primary has already accepted writes for the same document
We recently [introduced](https://www.elastic.co/guide/en/elasticsearch/reference/6.x/optimistic-concurrency-control.html) a new sequence number based approach that doesn't suffer from this dirty reads problem.
This commit removes support for internal versioning as a concurrency control mechanism in favor of the sequence number approach.
Relates to #1078
`CreateIndexRequest#source(Map<String, Object>, ... )`, which is used when
deserializing index creation requests, accidentally accepts mappings that are
nested twice under the type key (as described in the bug report #38266).
This in turn causes us to be too lenient in parsing typeless mappings. In
particular, we accept the following index creation request, even though it
should not contain the type key `_doc`:
```
PUT index?include_type_name=false
{
"mappings": {
"_doc": {
"properties": { ... }
}
}
}
```
There is a similar issue for both 'put templates' and 'put mappings' requests
as well.
This PR makes the minimal changes to detect and reject these typed mappings in
requests. It does not address #38266 generally, or attempt a larger refactor
around types in these server-side requests, as I think this should be done at a
later time.
This PR fixes a couple test issues:
* It narrows an assertWarnings call that was too broad, and wasn't always
applicable with certain random sequences.
* Previously, we could send a typeless bulk request containing '_type: 'null'.
Now we omit the _type key altogether for typeless requests.
This commit ensures that the parts of rollup caps that can allow unknown
fields will allow them. It also modifies the test such that we can use
the features we need for disallowing fields in spots where they would
not be allowed.
Relates #36938
Introduced FollowParameters class that put follow, resume follow,
put auto follow pattern requests and follow info response classes reuse.
The FollowParameters class had the fields, getters etc. for the common parameters
that all these APIs have. Also binary and xcontent serialization /
parsing is handled by this class.
The follow, resume follow, put auto follow pattern request classes originally
used optional non primitive fields, so FollowParameters has that too and the follow info api can handle that now too.
Also the followerIndex field can in production only be specified via
the url path. If it is also specified via the request body then
it must have the same value as is specified in the url path. This
option only existed to xcontent testing. However the AbstractSerializingTestCase
base class now also supports createXContextTestInstance() to provide
a different test instance when testing xcontent, so allowing followerIndex
to be specified via the request body is no longer needed.
By moving the followerIndex field from Body to ResumeFollowAction.Request
class and not allowing the followerIndex field to be specified via
the request body the Body class is redundant and can be removed. The
ResumeFollowAction.Request class can then directly use the
FollowParameters class.
For consistency I also removed the ability to specified followerIndex
in the put follow api and the name in put auto follow pattern api via
the request body.
* Adding apm_user
* Fixing SecurityDocumentationIT testGetRoles test
* Adding access to .ml-anomalies-*
* Fixing APM test, we don't have access to the ML state index
X-Pack security supports built-in authentication service
`token-service` that allows access tokens to be used to
access Elasticsearch without using Basic authentication.
The tokens are generated by `token-service` based on
OAuth2 spec. The access token is a short-lived token
(defaults to 20m) and refresh token with a lifetime of 24 hours,
making them unsuitable for long-lived or recurring tasks where
the system might go offline thereby failing refresh of tokens.
This commit introduces a built-in authentication service
`api-key-service` that adds support for long-lived tokens aka API
keys to access Elasticsearch. The `api-key-service` is consulted
after `token-service` in the authentication chain. By default,
if TLS is enabled then `api-key-service` is also enabled.
The service can be disabled using the configuration setting.
The API keys:-
- by default do not have an expiration but expiration can be
configured where the API keys need to be expired after a
certain amount of time.
- when generated will keep authentication information of the user that
generated them.
- can be defined with a role describing the privileges for accessing
Elasticsearch and will be limited by the role of the user that
generated them
- can be invalidated via invalidation API
- information can be retrieved via a get API
- that have been expired or invalidated will be retained for 1 week
before being deleted. The expired API keys remover task handles this.
Following are the API key management APIs:-
1. Create API Key - `PUT/POST /_security/api_key`
2. Get API key(s) - `GET /_security/api_key`
3. Invalidate API Key(s) `DELETE /_security/api_key`
The API keys can be used to access Elasticsearch using `Authorization`
header, where the auth scheme is `ApiKey` and the credentials, is the
base64 encoding of API key Id and API key separated by a colon.
Example:-
```
curl -H "Authorization: ApiKey YXBpLWtleS1pZDphcGkta2V5" http://localhost:9200/_cluster/health
```
Closes#34383
The HLRC client currently uses `org.elasticsearch.action.admin.indices.get.GetIndexRequest`
and `org.elasticsearch.action.admin.indices.get.GetIndexResponse` in its get index calls. Both request and
response are designed for the typed APIs, including some return types e.g. for `getMappings()` which in
the maps it returns still use a level including the type name.
In order to change this without breaking existing users of the HLRC API, this PR introduces two new request
and response objects in the `org.elasticsearch.client.indices` client package. These are used by the
IndicesClient#get and IndicesClient#exists calls now by default and support the type-less API. The old request
and response objects are still kept for use in similarly named, but deprecated methods.
The newly introduced client side classes are simplified versions of the server side request/response classes since
they don't need to support wire serialization, and only the response needs fromXContent parsing (but no
xContent-serialization, since this is the responsibility of the server-side class).
Also changing the return type of `GetIndexResponse#getMapping` to
`Map<String, MappingMetaData> getMappings()`, while it previously was returning another map
keyed by the type-name. Similar getters return simple Maps instead of the ImmutableOpenMaps that the
server side response objects return.
As mapping types are being removed throughout Elasticsearch, the use of
`_type` in pipeline simulation requests is deprecated. Additionally, the
default `_type` used if one is not supplied has been changed to `_doc` for
consistency with the rest of Elasticsearch.
IndexLifecycleExplainResponse did not allow unknown fields. This commit
fixes the test and ConstructingObjectParser such that it allows unknown
fields.
This commit deprecates the few methods that had their parameters
reordered to facilitate the move from EmptyResponse to boolean. This
commit also readds the boolean based methods with the proper
signatures.
Relates #37540
Relates #36938
With this commit we add a monotonically strict timer to ensure time is
advancing even if the timer is called in a tight loop in tests. We also
relax a condition in a similar test so it only checks that time is not
moving backwards.
Closes#33747
Implements `geotile_grid` aggregation
This patch refactors previous implementation https://github.com/elastic/elasticsearch/pull/30240
This code uses the same base classes as `geohash_grid` agg, but uses a different hashing
algorithm to allow zoom consistency. Each grid bucket is aligned to Web Mercator tiles.
With #37566 we have introduced the ability to merge multiple search responses into one. That makes it possible to expose a new way of executing cross-cluster search requests, that makes CCS much faster whenever there is network latency between the CCS coordinating node and the remote clusters. The coordinating node can now send a single search request to each remote cluster, which gets reduced by each one of them. from + size results are requested to each cluster, and the reduce phase in each cluster is non final (meaning that buckets are not pruned and pipeline aggs are not executed). The CCS coordinating node performs an additional, final reduction, which produces one search response out of the multiple responses received from the different clusters.
This new execution path will be activated by default for any CCS request unless a scroll is provided or inner hits are requested as part of field collapsing. The search API accepts now a new parameter called ccs_minimize_roundtrips that allows to opt-out of the default behaviour.
Relates to #32125
The existing implementation was slow due to exceptions being thrown if
an accessor did not have a time zone. This implementation queries for
having a timezone, local time and local date and also checks for an
instant preventing to throw an exception and thus speeding up the conversion.
This removes the existing method and create a new one named
DateFormatters.from(TemporalAccessor accessor) to resemble the naming of
the java time ones.
Before this change an epoch millis parser using the toZonedDateTime
method took approximately 50x longer.
Relates #37826
* move watcher to seq# occ
* top level set
* fix parsing and missing setters
* share toXContent for PutResponse and rest end point
* fix redacted password
* fix username reference
* fix deactivate-watch.asciidoc have seq no references
* add seq# + term to activate-watch.asciidoc
* more doc fixes
This commit fixes the test case that ensures only a priority
less then 0 is used with testNonPositivePriority. This also
allows the HLRC to support a value of 0.
Closes#37652
Previously, ShrinkAction would fail if
it was executed on an index that had
the same number of shards as the target
shrunken number.
This PR introduced a new BranchingStep that
is used inside of ShrinkAction to branch which
step to move to next, depending on the
shard values. So no shrink will occur if the
shard count is unchanged.
The apache commons http client implementations recently released
versions that solve TLS compatibility issues with the new TLS engine
that supports TLSv1.3 with JDK 11. This change updates our code to
use these versions since JDK 11 is a supported JDK and we should
allow the use of TLSv1.3.
A few of the ILM Lifecycle Policy and classes did not allow for unknown
fields. This commit sets those parsers and fixes the tests for the
parsers.
Relates #36938
The subparser in verify repository allows for unknown fields. This
commit sets the value to true for the parser and modifies the test such
that it accurately tests it.
Relates #36938
The LLRC's exception handling for strict mode was previously throwing an
exception the HLRC assumed was an error response. This is not the case
if the result is valid in strict mode, as it will return the proper
response wrapped in an exception with warnings. This commit fixes the
HLRC such that it no longer spews if it encounters a strict LLRC
response.
Closes#37090
Jack Conradson
Ioannis Kakavas
David Kyle
Adrien Grand
Jason Tedor
David Roberts
Martijn van Groningen
Tal Levy
Hendrik Muhs
Paul Sanwald
Luca Cavanna
Lee Hinman
Boaz Leskes
Julie Tibshirani
Michael Basnight
Brandon Kobel
Yogesh Gaikwad
Christoph Büscher
Gordon Brown
Mayya Sharipova
Zachary Tong
Przemyslaw Gomulka
Daniel Mitterdorfer
Benjamin Trent
Yuri Astrakhan
Alexander Reelsen
Jake Landis
Jay Modi