The main installation instructions page for the Windows MSI installer includes a header at the top to indicate that the installer is in beta, but the Installing Elasticsearch page does not. This commit adds the beta label to the MSI entry within the installation options.
The maximum map count boostrap check can be a hindrance to users that do
not own the underlying platform on which they are executing
Elasticsearch. This is because addressing it requires tuning the kernel
and a platform provider might now allow this, especially on shared
infrastructure. However, this bootstrap check is not needed if mmapfs is
not in use. Today we do not have a way for the user to communicate that
they are not going to use mmapfs. This commit therefore adds a setting
that enables the user to disallow mmapfs. When mmapfs is disallowed, the
maximum map count bootstrap check is not enforced. Additionally, we
fallback to a different default index store and prevent the explicit use
of mmapfs for an index.
The docs here incorrectly state that it is okay for a heap dump file to
exist when heap dump path is configured to a fixed filename. This is
incorrect, the JVM will fail to write the heap dump if a heap dump file
already exists at the specified location (see the DumpWriter constructor
DumpWriter::DumpWriter(const char* path) in the JVM source).
On some Linux distributions tmpfiles.d cleans files and
directories under /tmp if they haven't been accessed for
10 days.
This can cause problems for ML as ML is currently the only
component that uses the temp directory more than a few
seconds after startup. If you didn't open an ML job for
10 days and then tried to open one then the temp directory
would have been deleted.
This commit prevents the problem occurring in the case of
Elasticsearch being managed by systemd, as systemd private
temp directories are not subject to periodic cleanup (by
default).
Additionally there are now some docs to warn people about
the risk and suggest a manual mitigation for .tar.gz users.
First, some background: we have 15 different methods to get a logger in
Elasticsearch but they can be broken down into three broad categories
based on what information is provided when building the logger.
Just a class like:
```
private static final Logger logger = ESLoggerFactory.getLogger(ActionModule.class);
```
or:
```
protected final Logger logger = Loggers.getLogger(getClass());
```
The class and settings:
```
this.logger = Loggers.getLogger(getClass(), settings);
```
Or more information like:
```
Loggers.getLogger("index.store.deletes", settings, shardId)
```
The goal of the "class and settings" variant is to attach the node name
to the logger. Because we don't always have the settings available, we
often use the "just a class" variant and get loggers without node names
attached. There isn't any real consistency here. Some loggers get the
node name because it is convenient and some do not.
This change makes the node name available to all loggers all the time.
Almost. There are some caveats are testing that I'll get to. But in
*production* code the node name is node available to all loggers. This
means we can stop using the "class and settings" variants to fetch
loggers which was the real goal here, but a pleasant side effect is that
the ndoe name is now consitent on every log line and optional by editing
the logging pattern. This is all powered by setting the node name
statically on a logging formatter very early in initialization.
Now to tests: tests can't set the node name statically because
subclasses of `ESIntegTestCase` run many nodes in the same jvm, even in
the same class loader. Also, lots of tests don't run with a real node so
they don't *have* a node name at all. To support multiple nodes in the
same JVM tests suss out the node name from the thread name which works
surprisingly well and easy to test in a nice way. For those threads
that are not part of an `ESIntegTestCase` node we stick whatever useful
information we can get form the thread name in the place of the node
name. This allows us to keep the logger format consistent.
We removed the default_fs store type yet the docs still contain a
reference to them. This commit addresses that by removing this
reference, and changing a reference to this section of the docs to
instead refer to mmapfs.
In the section of the bootstrap checks docs for the maximum map count
check, we refer to max size virtual memory check and explicitly call out
the maximum size virtual memory check as being the previous
point. However, this is not correct as the previous point is currently
the max file size check. It does make sense for these two checks to be
proximate to each other in the docs so this commit reorders the checks
so that the maximum size virtual memory check indeed comes before the
maximum map count check. This makes the sense in the maximum map count
check correct.
This commit removes the link to an oss-MSI; there is only one version of the MSI, which includes X-Pack.
(cherry picked from commit d2e5db8a806ec8a25162f79db5209aceed4f30f7)
This switches the docs tests from the `oss-zip` distribution to the
`zip` distribution so they have xpack installed and configured with the
default basic license. The goal is to be able to merge the
`x-pack/docs` directory into the `docs` directory, marking the x-pack
docs with some kind of marker. This is the first step in that process.
This also enables `-Dtests.distribution` support for the `docs`
directory so you can run the tests against the `oss-zip` distribution
with something like
```
./gradlew -p docs check -Dtests.distribution=oss-zip
```
We can set up Jenkins to run both.
Relates to #30665
This commit adds the distribution type to the startup scripts so that we
can discern from log output and the main response the type of the
distribution (deb/rpm/tar/zip).
This commit adds the distribution flavor (default versus oss) to the
build process which is passed through the startup scripts to
Elasticsearch. This change will be used to customize the message on
attempting to install/remove x-pack based on the distribution flavor.
Historically, the bootstrap checks used 2048 as the minimum limit for
the maximum number of threads. This limit was guided by the fact that
the number of processors was artificially capped at 32. This limit was
removed in 6.0.0 and the minimum limit was raised to 4096 to accommodate
this. However, the docs were not updated and this commit addresses that
miss.
This is a follow up to a previous change which set the error file path
for the package distributions. The observation here is that we always
set the working directory of Elasticsearch to the root of the
installation (i.e., Elasticsearch home). Therefore, we can specify the
error file path relative to this directory and default it to the logs
directory, similar to the package distributions.
This is a follow up to a previous change which set the heap dump path
for the package distributions. The observation here is that we always
set the working directory of Elasticsearch to to the root of
installation (i.e., Elasticsearch home). Therefore, we can specify the
heap dump path relative to this directory and default it to the data
directory, similar to the package distributions.
We previously specified the -server flag to force the JVM to use the
server JVM. This is the default on all the systems that we support when
using a 64-bit JVM (and we no longer support 32-bit JVMs). There was
some trouble with this flag for the Windows service since procrun did
not understand what to do with it; as such, we had to filter this flag
out in the service. When we migrated to parsing JVM options in Java (via
the JVM options parser) we simplified this situation and removed
specifying the -server flag. This commit removes a leftover statement
that we are forcing the server JVM.
Relates #28738
The Windows service will use a private temporary directory under the
user that is performing the installation. In cases when the service will
run as a different user, operators need a method to set this temporary
directory elsewhere. We have such a mechanism, so this commit merely
adds a note to the documentation on how to utilize it.
Relates #28712
* Only bind loopback addresses when binding to local
Today when binding to local (the default) we bind to any address that is
a loopback address, or any address on an interface that declares itself
as a loopback interface. Yet, not all addresses on loopback interfaces
are loopback addresses. This arises on macOS where there is a link-local
address assigned to the loopback interface (fe80::1%lo0) and in Docker
services where virtual IPs of the service are assigned to the loopback
interface (docker/libnetwork#1877). These situations cause problems:
- because we do not handle the scope ID of a link-local address, we end
up bound to an address for which publishing of that address does not
allow that address to be reached (since we drop the scope)
- the virtual IPs in the Docker situation are not loopback addresses,
they are not link-local addresses, so we end up bound to interfaces
that cause the bootstrap checks to be enforced even though the
instance is only bound to local
We address this by only binding to actual loopback addresses, and skip
binding to any address on a loopback interface that is not a loopback
address. This lets us simplify some code where in the bootstrap checks
we were skipping link-local addresses, and in writing the ports file
where we had to skip link-local addresses because again the formatting
of them does not allow them to be connected to by another node (to be
clear, they could be connected to via the scope-qualified address, but
that information is not written out).
Relates #28029
This commit reorganizes some of the content in the configuring
Elasticsearch section of the docs. The changes are:
- move JVM options out of system configuration into configuring
Elasticsearch
- move JVM options to its own page of the docs
- move configuring the heap to important Elasticsearch settings
- move configuring the heap to its own page of the docs
- move all important settings to individual pages in the docs
- remove bootstrap.memory_lock from important settings, this is covered
in the swap section of system configuration
Relates #27755
JDK 9 has removed JVM options that were valid in JDK 8 (e.g., GC logging
flags) and replaced them with new flags that are not available in JDK
8. This means that a single JVM options file can no longer apply to JDK
8 and JDK 9, complicating development, complicating our packaging story,
and complicating operations. This commit extends the JVM options syntax
to specify the range of versions the option applies to. If the running
JVM matches the range of versions, the flag will be used to start the
JVM otherwise the flag will be ignored.
We implement this parser in Java for simplicity, and with this we start
our first step towards a Java launcher.
Relates #27675
For too long we have been groping around in the dark when faced with GC
issues because we rarely have GC logs at our disposal. This commit
enables GC logging by default out of the box.
Relates #27610
Nikolay Vasiliev
Stuart Cam
Albert Zaharovits
Russ Cam
Jason Tedor
datosh
David Roberts
simonzheng
DeDe Morton
Albert Zaharovits
Nik Everett
debadair
Clinton Gormley
Lisa Cawley
David Pilato
Sachin Frayne
Jonathan Pool
Ryan Ernst
Andrew Banchich
sandstrom