The rest test framework, because it used to be tightly integrated with
ESIntegTestCase, currently expects the addresses for the test cluster to
be passed using the transport protocol port. However, it only uses this
to then find the http address.
This change makes ESRestTestCase extend from ESTestCase instead of
ESIntegTestCase, and changes the sysprop used to tests.rest.cluster,
which now takes the http address.
closes#15459
Site plugins used to be used for things like kibana and marvel, but
there is no longer a need since kibana (and marvel as a kibana plugin)
uses node.js. This change removes site plugins, as well as the flag for
jvm plugins. Now all plugins are jvm plugins.
This fixes the `lenient` parameter to be `missingClasses`. I will remove this boolean and we can handle them via the normal whitelist.
It also adds a check for sheisty classes (jar hell with the jdk).
This is inspired by the lucene "sheisty" classes check, but it has false positives. This check is more evil, it validates every class file against the extension classloader as a resource, to see if it exists there. If so: jar hell.
This jar hell is a problem for several reasons:
1. causes insanely-hard-to-debug problems (like bugs in forbidden-apis)
2. hides problems (like internal api access)
3. the code you think is executing, is not really executing
4. security permissions are not what you think they are
5. brings in unnecessary dependencies
6. its jar hell
The more difficult problems are stuff like jython, where these classes are simply 'uberjared' directly in, so you cant just fix them by removing a bogus dependency. And there is a legit reason for them to do that, they want to support java 1.4.
This commit adds the infrastructure to make settings that are updateable
resetable and changes the application of updates to be transactional. This means
setting updates are either applied or not. If the application failes all values are rejected.
This initial commit converts all dynamic cluster settings to make use of the new infrastructure.
All cluster level dynamic settings are not resettable to their defaults or to the node level settings.
The infrastructure also allows to list default values and descriptions which is not fully implemented yet.
Values can be reset using a list of key or simple regular expressions. This has only been implemented on the java
layer yet. For instance to reset all recovery settings to their defaults a user can just specify `indices.recovery.*`.
This commit also adds strict settings validation, if a setting is unknown or if a setting can not be applied the entire
settings update request will fail.
This commit removes and now forbids all uses of the type-unsafe empty
Collections fields Collections#EMPTY_LIST, Collections#EMPTY_MAP, and
Collections#EMPTY_SET. The type-safe methods Collections#emptyList,
Collections#emptyMap, and Collections#emptySet should be used instead.
Transitive dependencies can be confusing and hard to deal with when
conflicts arise between them. This change removes transitive
dependencies from elasticsearch, and forces any dependency conflicts to
be resolved manually, instead of automatically by gradle.
closes#14627
This change removes the leftover pom files. A couple files were left for
reference, namely in qa tests that have not yet been migrated (vagrant
and multinode). The deb and rpm assemblies also still exist for
reference when finishing their setup in gradle.
See #13930
* Allow for multiple host specifications (e.g. _en0_,192.168.1.2,_site_).
* Add _site_ and _global_ scopes as counterparts to _local_.
* Warn on heuristic selection of publish address.
* Remove the arbitrary _non_loopback_ setting.
Closes#13954
There are three ways `@Test` was used. Way one:
```java
@Test
public void flubTheBlort() {
```
This way was always replaced with:
```java
public void testFlubTheBlort() {
```
Or, maybe with a better method name if I was feeling generous.
Way two:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
methodThatThrows();
}
```
This way of using `@Test` is actually pretty OK, but to get the tools to ban
`@Test` entirely it can't be used. Instead:
```java
public void testFoo() {
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
This is longer but tests more than the old ways and is much more precise.
Compare:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
methodThatThrows();
code(); // <---- This was left here by mistake and is never called
}
```
to:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
The final use of test is:
```java
@Test(timeout=1000)
public void testFoo() {
methodThatWasSlow();
}
```
This is the most insidious use of `@Test` because its tempting but tragically
flawed. Its flaws are:
1. Hard and fast timeouts can look like they are asserting that something is
faster and even do an ok job of it when you compare the timings on the same
machine but as soon as you take them to another machine they start to be
invalid. On a slow VM both the new and old methods fail. On a super-fast
machine the slower and faster ways succeed.
2. Tests often contain slow `assert` calls so the performance of tests isn't
sure to predict the performance of non-test code.
3. These timeouts are rude to debuggers because the test just drops out from
under it after the timeout.
Confusingly, timeouts are useful in tests because it'd be rude for a broken
test to cause CI to abort the whole build after it hits a global timeout. But
those timeouts should be very very long "backstop" timeouts and aren't useful
assertions about speed.
For all its flaws `@Test(timeout=1000)` doesn't have a good replacement __in__
__tests__. Nightly benchmarks like http://benchmarks.elasticsearch.org/ are
useful here because they run on the same machine but they aren't quick to check
and it takes lots of time to figure out the regressions. Sometimes its useful
to compare dueling implementations but that requires keeping both
implementations around. All and all we don't have a satisfactory answer to the
question "what do you replace `@Test(timeout=1000)`" with. So we handle each
occurrence on a case by case basis.
For files with `@Test` this also:
1. Removes excess blank lines. They don't help anything.
2. Removes underscores from method names. Those would fail any code style
checks we ever care to run and don't add to readability. Since I did this manually
I didn't do it consistently.
3. Make sure all test method names start with `test`. Some used to end in `Test` or start
with `verify` or `check` and they were picked up using the annotation. Without the
annotation they always need to start with `test`.
4. Organizes imports using the rules we generate for Eclipse. For the most part
this just removes `*` imports which is a win all on its own. It was "required"
to quickly remove `@Test`.
5. Removes unneeded casts. This is just a setting I have enabled in Eclipse and
forgot to turn off before I did this work. It probably isn't hurting anything.
6. Removes trailing whitespace. Again, another Eclipse setting I forgot to turn
off that doesn't hurt anything. Hopefully.
7. Swaps some tests override superclass tests to make them empty with
`assumeTrue` so that the reasoning for the skips is logged in the test run and
it doesn't "look like" that thing is being tested when it isn't.
8. Adds an oxford comma to an error message.
The total test count doesn't change. I know. I counted.
```bash
git checkout master && mvn clean && mvn install | tee with_test
git no_test_annotation master && mvn clean && mvn install | tee not_test
grep 'Tests summary' with_test > with_test_summary
grep 'Tests summary' not_test > not_test_summary
diff with_test_summary not_test_summary
```
These differ somewhat because some tests are skipped based on the random seed.
The total shouldn't differ. But it does!
```
1c1
< [INFO] Tests summary: 564 suites (1 ignored), 3171 tests, 31 ignored (31 assumptions)
---
> [INFO] Tests summary: 564 suites (1 ignored), 3167 tests, 17 ignored (17 assumptions)
```
These are the core unit tests. So we dig further:
```bash
cat with_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > with_test_suites
cat not_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > not_test_suites
diff <(sort with_test_suites) <(sort not_test_suites)
```
The four tests with lower test numbers are all extend `AbstractQueryTestCase`
and all have a method that looks like this:
```java
@Override
public void testToQuery() throws IOException {
assumeTrue("test runs only when at least a type is registered", getCurrentTypes().length > 0);
super.testToQuery();
}
```
It looks like this method was being double counted on master and isn't anymore.
Closes#14028
* Add ability for plugins to declare additional permissions with a custom plugin-security.policy file and corresponding AccessController logic. See the plugin author's guide for more information.
* Add warning messages to users for extra plugin permissions in bin/plugin.
* When bin/plugin is run interactively (stdin is a controlling terminal and -b/--batch not supplied), require user confirmation.
* Improve unit test and IDE support for plugins with additional permissions by exposing plugin's metadata as a maven test resource.
Closes#14108
Squashed commit of the following:
commit cf8ace65a7397aaccd356bf55f95d6fbb8bb571c
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 13:36:05 2015 -0400
fix new unit test from master merge
commit 9be3c5aa38f2d9ae50f3d54924a30ad9cddeeb65
Merge: 2f168b8 7368231
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:58:31 2015 -0400
Merge branch 'master' into off_my_back
commit 2f168b8038e32672f01ad0279fb5db77ba902ae8
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:56:04 2015 -0400
improve plugin author documentation
commit 6e6c2bfda68a418d92733ac22a58eec35508b2d0
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:52:14 2015 -0400
move security confirmation after 'plugin already installed' check, to prevent user from answering unnecessary questions.
commit 08233a2972554afef2a6a7521990283102e20d92
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 05:36:42 2015 -0400
Add documentation and pluginmanager support
commit 05dad86c51488ba43ccbd749f0164f3fbd3aee62
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 02:22:24 2015 -0400
Decentralize plugin permissions (modulo docs and pluginmanager work)
Yannick Welsch
Ryan Ernst
Nik Everett
Robert Muir
Simon Willnauer
Jason Tedor
xuzha
David Pilato